D: [iurt_root_command] chroot Installing /home/iurt/rpmbuild/SRPMS/freecad-0.18.5-4.mga8.src.rpm Building target platforms: aarch64 Building for target aarch64 Executing(%prep): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.M8s82V + umask 022 + cd /home/iurt/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + cd /home/iurt/rpmbuild/BUILD + rm -rf FreeCAD-0.18.5 + /usr/bin/gzip -dc /home/iurt/rpmbuild/SOURCES/FreeCAD-0.18.5.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd FreeCAD-0.18.5 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + /usr/bin/cat /home/iurt/rpmbuild/SOURCES/freecad-0.17-zipios.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch + /usr/bin/cat /home/iurt/rpmbuild/SOURCES/freecad-0.17-Version_h.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch + /usr/bin/cat /home/iurt/rpmbuild/SOURCES/freecad-0.18-py38.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch + /usr/bin/cat /home/iurt/rpmbuild/SOURCES/freecad-boost_173.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch + /usr/bin/cat /home/iurt/rpmbuild/SOURCES/freecad-unbundled-pycxx.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch + /usr/bin/cat /home/iurt/rpmbuild/SOURCES/freecad-0.18.5-mga-std-endl-fix.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch + /usr/bin/cat /home/iurt/rpmbuild/SOURCES/fix-fem-tests.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch + /usr/bin/cat /home/iurt/rpmbuild/SOURCES/set_about_freecad.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch + /usr/bin/cat /home/iurt/rpmbuild/SOURCES/fix_gcc8_ftbfs.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch + /usr/bin/cat /home/iurt/rpmbuild/SOURCES/fix-cmake-extra-license.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch + /usr/bin/cat /home/iurt/rpmbuild/SOURCES/do_not_install_binary_examples.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch + /usr/bin/cat /home/iurt/rpmbuild/SOURCES/exclude_ply.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch + /usr/bin/cat /home/iurt/rpmbuild/SOURCES/disable_memory_check.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch + /usr/bin/cat /home/iurt/rpmbuild/SOURCES/remove_doc-files.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch + /usr/bin/cat /home/iurt/rpmbuild/SOURCES/0001-Update-FindPySide2Tools-for-PySide2-5.14.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch + /usr/bin/cat /home/iurt/rpmbuild/SOURCES/0002-Fix-qt5_5.15.0-build.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch + rm -rf src/CXX + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.TVPYAT + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd FreeCAD-0.18.5 + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables ' + export FCFLAGS + LDFLAGS=' -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags' + export LDFLAGS ++ pkg-config --variable=includedir PyCXX ++ pkg-config --variable=srcdir PyCXX + /usr/bin/cmake -Wno-dev -S . -B build -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib64 -DCMAKE_INSTALL_LIBEXECDIR:PATH=/usr/libexec -DCMAKE_INSTALL_RUNSTATEDIR:PATH=/run -DCMAKE_INSTALL_SYSCONFDIR:PATH=/etc -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib64 -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_BUILD_TYPE=RelWithDebInfo -DCMAKE_CXX_FLAGS_RELWITHDEBINFO:STRING=-DNDEBUG -DCMAKE_C_FLAGS_RELWITHDEBINFO:STRING=-DNDEBUG -DCMAKE_CXX_FLAGS_RELEASE:STRING=-DNDEBUG -DCMAKE_C_FLAGS_RELEASE:STRING=-DNDEBUG -DLIB_SUFFIX=64 -DCMAKE_VERBOSE_MAKEFILE:BOOL=ON '-DCMAKE_MODULE_LINKER_FLAGS=-Wl,--as-needed -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags' -DBUILD_SHARED_LIBS:BOOL=ON -DBUILD_STATIC_LIBS:BOOL=OFF -DCMAKE_INSTALL_PREFIX=/usr/lib64/freecad -DCMAKE_INSTALL_LIBDIR=/usr/lib64/freecad/lib -DCMAKE_INSTALL_DATADIR=/usr/share/freecad -DCMAKE_INSTALL_DOCDIR=/usr/share/doc/freecad -DCMAKE_INSTALL_INCLUDEDIR=/usr/include -DRESOURCEDIR=/usr/share/freecad -DOpenGL_GL_PREFERENCE=GLVND -DCOIN3D_INCLUDE_DIR=/usr/include/Coin4 -DFREECAD_USE_EXTERNAL_PIVY=TRUE -DUSE_OCC=TRUE -DFREECAD_USE_EXTERNAL_SMESH=FALSE -DSMESH_INCLUDE_DIR=/usr/include/smesh -DFREECAD_USE_EXTERNAL_ZIPIOS=FALSE -DPYCXX_INCLUDE_DIR=/usr/include -DPYCXX_SOURCE_DIR=/usr/src/CXX -DMEDFILE_INCLUDE_DIRS=/usr/include/med -DOPENMPI_INCLUDE_DIRS=/usr/include -DBUILD_QT5=ON -DPYTHON_EXECUTABLE=/usr/bin/python3 -DSHIBOKEN_INCLUDE_DIR=/usr/include/shiboken2/ -DSHIBOKEN_LIBRARY=/usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so -DPYSIDE_INCLUDE_DIR=/usr/include/PySide2/ -DPYSIDE_LIBRARY=/usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so -DBUILD_ENABLE_CXX_STD=C++14 -- The C compiler identification is GNU 10.2.1 -- The CXX compiler identification is GNU 10.2.1 -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /usr/bin/cc - skipped -- Detecting C compile features -- Detecting C compile features - done -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working CXX compiler: /usr/bin/c++ - skipped -- Detecting CXX compile features -- Detecting CXX compile features - done -- Compiler: GNU, version: 10.2.1 -- Looking for GL/gl.h -- Looking for GL/gl.h - found -- Looking for C++ include istream -- Looking for C++ include istream - found -- Looking for C++ include ostream -- Looking for C++ include ostream - found -- Looking for C++ include fstream -- Looking for C++ include fstream - found -- Looking for C++ include sstream -- Looking for C++ include sstream - found -- Looking for C++ include ios -- Looking for C++ include ios - found -- Looking for C++ include iostream -- Looking for C++ include iostream - found -- Looking for C++ include iomanip -- Looking for C++ include iomanip - found -- Looking for C++ include iostream -- Looking for C++ include iostream - found -- Check for STD namespace -- Check for STD namespace - found -- prefix: /usr/lib64/freecad -- datadir: /usr/share/freecad -- docdir: /usr/share/doc/freecad -- includedir: /usr/include -- libdir: /usr/lib64/freecad/lib -- cmake: 3.19.2 -- Found PythonInterp: /usr/bin/python3 (found version "3.8.7") -- Found PythonLibs: /usr/lib64/libpython3.8.so (found suitable exact version "3.8.7") -- Found Boost: /usr/lib64/cmake/Boost-1.75.0/BoostConfig.cmake (found version "1.75.0") found components: filesystem program_options regex system thread -- Found Xerces-C: /usr/lib64/libxerces-c.so -- Found ZLIB: /usr/lib64/libz.so (found version "1.2.11") -- PyCXX found: -- Headers: /usr/include -- Sources: /usr/src/CXX -- Version: 7.1.4 -- Found OCC: /usr/include/opencascade (found version "7.4.1") -- -- Found OCE/OpenCASCADE version: 7.4.1 -- -- OCE/OpenCASCADE include directory: /usr/include/opencascade -- -- OCE/OpenCASCADE shared libraries directory: /usr/lib64 -- VTK components: vtkCommonCore;vtkCommonDataModel;vtkFiltersVerdict;vtkIOXML;vtkFiltersCore;vtkFiltersGeneral;vtkIOLegacy;vtkFiltersExtraction;vtkFiltersSources;vtkFiltersGeometry;vtkIOMPIParallel;vtkParallelMPI;vtkhdf5;vtkFiltersParallelDIY2;vtkRenderingCore;vtkInteractionStyle;vtkRenderingFreeType;vtkRenderingOpenGL2 -- Check for medfile (libmed and libmedc) ... -- Found MEDFile: /usr/include/med -- Found PkgConfig: /usr/bin/pkg-config (found version "1.7.3") -- We guess that libmed was built using hdf5-serial version -- Checking for one of the modules 'hdf5-serial' -- Found HDF5: /usr/lib64/libhdf5.so;/usr/lib64/libz.so;/usr/lib64/libdl.so;/usr/lib64/libm.so (found version "1.10.7") -- Checking for one of the modules 'ompi-cxx' -- Found SWIG: /usr/bin/swig (found version "4.0.2") -- Found Eigen3: /usr/include/eigen3 (Required is at least version "2.91.0") -- Found Threads: TRUE -- Found Freetype: /usr/lib64/libfreetype.so (found version "2.10.4") -- Found OpenGL: /usr/lib64/libOpenGL.so -- Found OpenGLU: /usr/lib64/libGLU.so -- Checking for module 'Coin' -- Found Coin, version 4.0.0 -- Found Spnav: /usr/lib64/libspnav.so -- Shiboken2Config: Using default python: .cpython-38-aarch64-linux-gnu -- Found PythonInterp: /usr/bin/python3 (found suitable version "3.8.7", minimum required is "3") -- Found PythonLibs: /usr/lib64/libpython3.8.so (found suitable version "3.8.7", minimum required is "3") -- SHIBOKEN_PYTHON_INCLUDE_DIRS computed to value: '/usr/include/python3.8' -- SHIBOKEN_PYTHON_LIBRARIES computed to value: '' -- libshiboken built for RelWithDebInfo -- PYTHON_CONFIG_SUFFIX: .cpython-38-aarch64-linux-gnu -- libshiboken built for RelWithDebInfo -- -- matplotlib-3.3.3 has been found. -- Platform is 64-bit, set -D_OCC64 -- Build type: RelWithDebInfo /bin/sh: line 1: git: command not found /bin/sh: line 1: bzr: command not found /bin/sh: line 1: svnversion: command not found /bin/sh: line 1: svn: command not found Unknown version control /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Build/Version.h.out written -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/BaseClassPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/BoundBoxPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/CoordinateSystemPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/PersistencePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/VectorPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/MatrixPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/RotationPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/PlacementPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/AxisPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/UnitPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/QuantityPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/DocumentPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/DocumentObjectPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/ExtensionPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/ExtensionContainerPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/DocumentObjectExtensionPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/GroupExtensionPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/DocumentObjectGroupPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/GeoFeaturePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/GeoFeatureGroupExtensionPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/OriginGroupExtensionPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/PartPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/ComplexGeoDataPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/PropertyContainerPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/MaterialPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App/PointsPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App/FacetPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App/MeshFeaturePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App/MeshPointPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App/MeshPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ViewProviderMeshPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ArcPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ArcOfConicPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ArcOfCirclePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ArcOfParabolaPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BodyBasePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ConicPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/CirclePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ArcOfEllipsePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/EllipsePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/HyperbolaPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ArcOfHyperbolaPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ParabolaPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/OffsetCurvePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/GeometryPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/GeometryCurvePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BoundedCurvePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TrimmedCurvePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/GeometrySurfacePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/LinePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/LineSegmentPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/PointPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BezierCurvePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BSplineCurvePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/PlanePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ConePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/CylinderPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/SpherePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ToroidPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BezierSurfacePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BSplineSurfacePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/OffsetSurfacePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/PlateSurfacePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/RectangularTrimmedSurfacePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/SurfaceOfExtrusionPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/SurfaceOfRevolutionPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/PartFeaturePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/AttachExtensionPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Part2DObjectPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/AttachEnginePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeCompoundPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeCompSolidPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeEdgePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeFacePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeShellPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeSolidPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeVertexPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeWirePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BRepOffsetAPI_MakePipeShellPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/ArcOfCircle2dPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/ArcOfConic2dPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/ArcOfEllipse2dPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/ArcOfHyperbola2dPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/ArcOfParabola2dPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/BezierCurve2dPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/BSplineCurve2dPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Circle2dPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Conic2dPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Ellipse2dPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Geometry2dPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Hyperbola2dPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Curve2dPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Line2dSegmentPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Line2dPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/OffsetCurve2dPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Parabola2dPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App/BodyPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App/FeaturePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ViewProviderPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/SketchObjectSFPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/SketchObjectPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/ConstraintPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/SketchPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/Robot6AxisPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/TrajectoryPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/WaypointPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/RobotObjectPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App/StepShapePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App/FemMeshPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App/FemPostPipelinePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ViewProviderFemMeshPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/SheetPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/PropertySheetPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/PropertyColumnWidthsPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/PropertyRowHeightsPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/CommandPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/PathPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/ToolPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/TooltablePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/FeaturePathCompoundPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/AreaPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/FeatureAreaPy.cpp -- setting gcc options: -Wall -Werror -Wno-deprecated -pedantic-errors -- Found Boost: /usr/lib64/cmake/Boost-1.75.0/BoostConfig.cmake (found version "1.75.0") found components: python38 -- found Boost: 1_75 -- boost-incude dirs are: /usr/include -- boost-python lib is: -- boost_LIBRARY_DIRS is: /usr/lib64 -- Boost_LIBRARIES is: Boost::python -- area module (for Path Workbench) will be installed to: /usr/lib64/freecad/lib -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/PathSimulator/App/PathSimPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Measure/App/MeasurementPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawPagePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawViewPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawViewPartPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawViewSymbolPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawTemplatePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawParametricTemplatePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawSVGTemplatePy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawViewClipPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawViewDimensionPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawHatchPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawGeomHatchPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawViewCollectionPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawProjGroupPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawProjGroupItemPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawViewAnnotationPy.cpp -- Found Doxygen: /usr/bin/doxygen (found version "1.9.1") found components: doxygen dot -- Coin3D doc is not installed -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DocumentPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/PythonWorkbenchPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ViewProviderPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ViewProviderDocumentObjectPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/WorkbenchPy.cpp -- /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/SelectionObjectPy.cpp ======================================= Now run 'make' to build FreeCAD ======================================= -- Configuring done -- Generating done -- Build files have been written to: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build + /usr/bin/cmake --build build -j8 --verbose /usr/bin/cmake -S/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 -B/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build --check-build-system CMakeFiles/Makefile.cmake 0 /usr/bin/cmake -E cmake_progress_start /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/CMakeFiles /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build//CMakeFiles/progress.marks /usr/bin/gmake -f CMakeFiles/Makefile2 all gmake[1]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/depend /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/DependInfo.cmake --color= gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/DependInfo.cmake --color= /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/depend /usr/bin/gmake -f src/Base/CMakeFiles/FreeCADBase.dir/build.make src/Base/CMakeFiles/FreeCADBase.dir/depend /usr/bin/gmake -f src/Mod/Complete/CMakeFiles/Complete.dir/build.make src/Mod/Complete/CMakeFiles/Complete.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/DependInfo.cmake --color= /usr/bin/gmake -f src/Mod/Complete/Gui/CMakeFiles/CompleteGui.dir/build.make src/Mod/Complete/Gui/CMakeFiles/CompleteGui.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Complete /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Complete /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Complete/CMakeFiles/Complete.dir/DependInfo.cmake --color= gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Test/CMakeFiles/Test.dir/build.make src/Mod/Test/CMakeFiles/Test.dir/depend Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/depend.internal". gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Complete/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Complete/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Complete/Gui/CMakeFiles/CompleteGui.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/depend.internal". gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/CMakeFiles/Test.dir/DependInfo.cmake --color= [ 0%] Generating moc_FutureWatcherProgress.cpp Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Complete/Gui/CMakeFiles/CompleteGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Complete/Gui/CMakeFiles/CompleteGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Complete/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Complete/Gui/CMakeFiles/CompleteGui.dir/depend.internal". Scanning dependencies of target CompleteGui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/moc_FutureWatcherProgress.cpp_parameters Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Complete/CMakeFiles/Complete.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Complete/CMakeFiles/Complete.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Complete/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Complete/CMakeFiles/Complete.dir/depend.internal". Scanning dependencies of target Complete Scanning dependencies of target MEFISTO2 gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/build gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Complete/Gui/CMakeFiles/CompleteGui.dir/build.make src/Mod/Complete/Gui/CMakeFiles/CompleteGui.dir/build Scanning dependencies of target Driver Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/CMakeFiles/Test.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/CMakeFiles/Test.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/CMakeFiles/Test.dir/depend.internal". Scanning dependencies of target Test gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/build /usr/bin/gmake -f src/Mod/Complete/CMakeFiles/Complete.dir/build.make src/Mod/Complete/CMakeFiles/Complete.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Test/CMakeFiles/Test.dir/build.make src/Mod/Test/CMakeFiles/Test.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 0%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/src/MEFISTO2/aptrte.cpp.o gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 0%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/src/Driver/Driver_Document.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DMEFISTO2_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -DMEFISTO2D_EXPORTS -pthread -o CMakeFiles/MEFISTO2.dir/src/MEFISTO2/aptrte.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/MEFISTO2/aptrte.cpp [ 0%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Complete/Gui/Resources/icons/CompleteWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Complete/Resources/icons/CompleteWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DDriver_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/Driver.dir/src/Driver/Driver_Document.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver/Driver_Document.cpp [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/BaseTests.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/BaseTests.py [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Complete/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Complete/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Complete/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Complete/Gui/Resources/icons/CompleteWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Complete/Resources/icons/CompleteWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/BaseTests.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/BaseTests.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Complete && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Complete/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Complete/Init.py [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Document.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/Document.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Document.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/Document.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Complete/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Complete/InitGui.py [ 1%] Built target CompleteGui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Complete && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Complete/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Complete/InitGui.py /usr/bin/gmake -f src/Mod/Image/CMakeFiles/ImageScripts.dir/build.make src/Mod/Image/CMakeFiles/ImageScripts.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/CMakeFiles/ImageScripts.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/Init.py Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/CMakeFiles/ImageScripts.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/CMakeFiles/ImageScripts.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/CMakeFiles/ImageScripts.dir/depend.internal". [ 1%] Built target Complete Scanning dependencies of target ImageScripts gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Mesh/CMakeFiles/MeshScripts.dir/build.make src/Mod/Mesh/CMakeFiles/MeshScripts.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/CMakeFiles/MeshScripts.dir/DependInfo.cmake --color= /usr/bin/gmake -f src/Mod/Image/CMakeFiles/ImageScripts.dir/build.make src/Mod/Image/CMakeFiles/ImageScripts.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' Scanning dependencies of target SMDS cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/Init.py [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/InitGui.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/CMakeFiles/MeshScripts.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/CMakeFiles/MeshScripts.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/CMakeFiles/MeshScripts.dir/depend.internal". [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/ImageTools/_CommandImageScaling.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Image/ImageTools/_CommandImageScaling.py Scanning dependencies of target MeshScripts cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/ImageTools/_CommandImageScaling.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Image/ImageTools/_CommandImageScaling.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/InitGui.py /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/build gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Mesh/CMakeFiles/MeshScripts.dir/build.make src/Mod/Mesh/CMakeFiles/MeshScripts.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Menu.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/Menu.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Menu.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/Menu.py [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/TestApp.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/TestApp.py [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/BuildRegularGeoms.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Mesh/BuildRegularGeoms.py [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/ImageTools/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Image/ImageTools/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/ImageTools/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Image/ImageTools/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/TestApp.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/TestApp.py [ 1%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_BallElement.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_BallElement.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_BallElement.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/BuildRegularGeoms.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Mesh/BuildRegularGeoms.py /usr/bin/gmake -f src/Mod/Part/CMakeFiles/PartScripts.dir/build.make src/Mod/Part/CMakeFiles/PartScripts.dir/depend [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Image/Init.py [ 1%] Generating moc_Debugger.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/moc_Debugger.cpp_parameters cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Image/Init.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/CMakeFiles/PartScripts.dir/DependInfo.cmake --color= [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Mesh/Init.py Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/CMakeFiles/PartScripts.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/CMakeFiles/PartScripts.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/CMakeFiles/PartScripts.dir/depend.internal". Scanning dependencies of target PartScripts gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Mesh/Init.py [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/TestGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/TestGui.py /usr/bin/gmake -f src/Mod/Part/CMakeFiles/PartScripts.dir/build.make src/Mod/Part/CMakeFiles/PartScripts.dir/build [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Mesh/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Mesh/InitGui.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/TestGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/TestGui.py [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Image/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Image/InitGui.py [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/AttachmentEditor/Commands.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/AttachmentEditor/Commands.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/CMakeFiles/FreeCADBase.dir/DependInfo.cmake --color= cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/AttachmentEditor/Commands.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/AttachmentEditor/Commands.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/CMakeFiles/FreeCADBase.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/CMakeFiles/FreeCADBase.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/CMakeFiles/FreeCADBase.dir/depend.internal". [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshTestsApp.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Mesh/MeshTestsApp.py [ 1%] Built target ImageScripts [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/TestPythonSyntax.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/TestPythonSyntax.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshTestsApp.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Mesh/MeshTestsApp.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/TestPythonSyntax.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/TestPythonSyntax.py /usr/bin/gmake -f src/Mod/Material/CMakeFiles/FluidMaterialLib.dir/build.make src/Mod/Material/CMakeFiles/FluidMaterialLib.dir/depend [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/AttachmentEditor/FrozenClass.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/AttachmentEditor/FrozenClass.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material/CMakeFiles/FluidMaterialLib.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/AttachmentEditor/FrozenClass.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/AttachmentEditor/FrozenClass.py Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material/CMakeFiles/FluidMaterialLib.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material/CMakeFiles/FluidMaterialLib.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material/CMakeFiles/FluidMaterialLib.dir/depend.internal". Scanning dependencies of target FluidMaterialLib gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Material/CMakeFiles/FluidMaterialLib.dir/build.make src/Mod/Material/CMakeFiles/FluidMaterialLib.dir/build [ 1%] Built target MeshScripts gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Material/CMakeFiles/MaterialLib.dir/build.make src/Mod/Material/CMakeFiles/MaterialLib.dir/depend [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/UnicodeTests.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/UnicodeTests.py [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/FluidMaterial/Air.FCMat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/FluidMaterial/Air.FCMat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/UnicodeTests.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/UnicodeTests.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/FluidMaterial/Air.FCMat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/FluidMaterial/Air.FCMat [ 1%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/AttachmentEditor/TaskAttachmentEditor.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/AttachmentEditor/TaskAttachmentEditor.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material/CMakeFiles/MaterialLib.dir/DependInfo.cmake --color= cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/AttachmentEditor/TaskAttachmentEditor.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/AttachmentEditor/TaskAttachmentEditor.py Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material/CMakeFiles/MaterialLib.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material/CMakeFiles/MaterialLib.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material/CMakeFiles/MaterialLib.dir/depend.internal". Scanning dependencies of target MaterialLib gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Material/CMakeFiles/MaterialLib.dir/build.make src/Mod/Material/CMakeFiles/MaterialLib.dir/build [ 2%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/FluidMaterial/None.FCMat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/FluidMaterial/None.FCMat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/FluidMaterial/None.FCMat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/FluidMaterial/None.FCMat [ 2%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/AttachmentEditor/TaskAttachmentEditor.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/AttachmentEditor/TaskAttachmentEditor.ui [ 2%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/UnitTests.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/UnitTests.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/AttachmentEditor/TaskAttachmentEditor.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/AttachmentEditor/TaskAttachmentEditor.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/UnitTests.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/UnitTests.py [ 2%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/ABS-Generic.FCMat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/ABS-Generic.FCMat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/ABS-Generic.FCMat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/ABS-Generic.FCMat [ 2%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Workbench.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/Workbench.py [ 2%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/FluidMaterial/Readme.txt to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/FluidMaterial/Readme.txt [ 2%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/AttachmentEditor/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/AttachmentEditor/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Workbench.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/Workbench.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/AttachmentEditor/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/AttachmentEditor/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/FluidMaterial/Readme.txt /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/FluidMaterial/Readme.txt [ 2%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/__init__.py [ 2%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/Acrylic-Glass-Generic.FCMat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/Acrylic-Glass-Generic.FCMat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/Acrylic-Glass-Generic.FCMat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/Acrylic-Glass-Generic.FCMat [ 2%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/BOPTools/GeneralFuseResult.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/BOPTools/GeneralFuseResult.py [ 2%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/FluidMaterial/Water.FCMat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/FluidMaterial/Water.FCMat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/FluidMaterial/Water.FCMat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/FluidMaterial/Water.FCMat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/BOPTools/GeneralFuseResult.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/BOPTools/GeneralFuseResult.py [ 2%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/CalculiX-Steel.FCMat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/CalculiX-Steel.FCMat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/CalculiX-Steel.FCMat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/CalculiX-Steel.FCMat [ 2%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/testmakeWireString.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/testmakeWireString.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/testmakeWireString.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/testmakeWireString.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 2%] Built target FluidMaterialLib [ 2%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/BOPTools/JoinAPI.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/BOPTools/JoinAPI.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/BOPTools/JoinAPI.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/BOPTools/JoinAPI.py /usr/bin/gmake -f src/Mod/Material/CMakeFiles/Material.dir/build.make src/Mod/Material/CMakeFiles/Material.dir/depend [ 2%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/unittestgui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/unittestgui.py [ 2%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/Concrete-Generic.FCMat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/Concrete-Generic.FCMat [ 2%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/src/Driver/Driver_Mesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/Concrete-Generic.FCMat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/Concrete-Generic.FCMat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/unittestgui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/unittestgui.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material/CMakeFiles/Material.dir/DependInfo.cmake --color= cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DDriver_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/Driver.dir/src/Driver/Driver_Mesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver/Driver_Mesh.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 2%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/Glass-Generic.FCMat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/Glass-Generic.FCMat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/Glass-Generic.FCMat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/Glass-Generic.FCMat Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material/CMakeFiles/Material.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material/CMakeFiles/Material.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material/CMakeFiles/Material.dir/depend.internal". Scanning dependencies of target Material [ 2%] Built target Test [ 2%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/BOPTools/JoinFeatures.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/BOPTools/JoinFeatures.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Material/CMakeFiles/Material.dir/build.make src/Mod/Material/CMakeFiles/Material.dir/build cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/BOPTools/JoinFeatures.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/BOPTools/JoinFeatures.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 2%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Material/Init.py [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/None.FCMat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/None.FCMat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Material/Init.py [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/BOPTools/ShapeMerge.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/BOPTools/ShapeMerge.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/None.FCMat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/None.FCMat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/BOPTools/ShapeMerge.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/BOPTools/ShapeMerge.py /usr/bin/gmake -f src/Mod/PartDesign/CMakeFiles/WizardShaft.dir/build.make src/Mod/PartDesign/CMakeFiles/WizardShaft.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/CMakeFiles/WizardShaft.dir/DependInfo.cmake --color= [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Material/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Material/InitGui.py Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/CMakeFiles/WizardShaft.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/CMakeFiles/WizardShaft.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/CMakeFiles/WizardShaft.dir/depend.internal". Scanning dependencies of target WizardShaft [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/PA6-Generic.FCMat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/PA6-Generic.FCMat [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/BOPTools/SplitAPI.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/BOPTools/SplitAPI.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/PA6-Generic.FCMat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/PA6-Generic.FCMat [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/MatPropDict.xml to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Material/MatPropDict.xml cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/MatPropDict.xml /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Material/MatPropDict.xml gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/PartDesign/CMakeFiles/WizardShaft.dir/build.make src/Mod/PartDesign/CMakeFiles/WizardShaft.dir/build cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/BOPTools/SplitAPI.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/BOPTools/SplitAPI.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/WizardShaft/SegmentFunction.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/WizardShaft/SegmentFunction.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/WizardShaft/SegmentFunction.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/WizardShaft/SegmentFunction.py [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/Material.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Material/Material.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/Material.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Material/Material.py [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/BOPTools/SplitFeatures.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/BOPTools/SplitFeatures.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/BOPTools/SplitFeatures.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/BOPTools/SplitFeatures.py [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/PET-Generic.FCMat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/PET-Generic.FCMat [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/WizardShaft/Shaft.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/WizardShaft/Shaft.py [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/MaterialEditor.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Material/MaterialEditor.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/MaterialEditor.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Material/MaterialEditor.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/WizardShaft/Shaft.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/WizardShaft/Shaft.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/PET-Generic.FCMat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/PET-Generic.FCMat [ 3%] Generating Material_rc.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/rcc-qt5 --generator=python --compress-algo=zlib --compress=1 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/Resources/Material.qrc -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material/Material_rc.py [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/PLA-Generic.FCMat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/PLA-Generic.FCMat [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/WizardShaft/ShaftDiagram.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/WizardShaft/ShaftDiagram.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/WizardShaft/ShaftDiagram.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/WizardShaft/ShaftDiagram.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/PLA-Generic.FCMat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/PLA-Generic.FCMat [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/BOPTools/Utils.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/BOPTools/Utils.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && sed -i /^#\ /d /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material/Material_rc.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/BOPTools/Utils.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/BOPTools/Utils.py [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/BOPTools/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/BOPTools/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/BOPTools/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/BOPTools/__init__.py [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/WizardShaft/ShaftFeature.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/WizardShaft/ShaftFeature.py [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/importFCMat.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Material/importFCMat.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/WizardShaft/ShaftFeature.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/WizardShaft/ShaftFeature.py [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/PP-Generic.FCMat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/PP-Generic.FCMat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/importFCMat.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Material/importFCMat.py [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/BasicShapes/Shapes.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/BasicShapes/Shapes.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/BasicShapes/Shapes.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/BasicShapes/Shapes.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/PP-Generic.FCMat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/PP-Generic.FCMat [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/WizardShaft/WizardShaft.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/WizardShaft/WizardShaft.py [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/materials-editor.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Material/materials-editor.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/materials-editor.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Material/materials-editor.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/WizardShaft/WizardShaft.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/WizardShaft/WizardShaft.py [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/PTFE-Generic.FCMat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/PTFE-Generic.FCMat [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/BasicShapes/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/BasicShapes/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/BasicShapes/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/BasicShapes/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/PTFE-Generic.FCMat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/PTFE-Generic.FCMat [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/CompoundTools/CompoundFilter.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/CompoundTools/CompoundFilter.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/CompoundTools/CompoundFilter.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/CompoundTools/CompoundFilter.py Scanning dependencies of target FreeCADBase [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material/Material_rc.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Material/Material_rc.py [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/WizardShaft/WizardShaft.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/WizardShaft/WizardShaft.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material/Material_rc.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Material/Material_rc.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/WizardShaft/WizardShaft.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/WizardShaft/WizardShaft.svg /usr/bin/gmake -f src/Base/CMakeFiles/FreeCADBase.dir/build.make src/Base/CMakeFiles/FreeCADBase.dir/build [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/PVC-Generic.FCMat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/PVC-Generic.FCMat [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/CompoundTools/Explode.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/CompoundTools/Explode.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/PVC-Generic.FCMat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/PVC-Generic.FCMat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/CompoundTools/Explode.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/CompoundTools/Explode.py [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/WizardShaft/WizardShaftTable.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/WizardShaft/WizardShaftTable.py [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/CompoundTools/_CommandCompoundFilter.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/CompoundTools/_CommandCompoundFilter.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/CompoundTools/_CommandCompoundFilter.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/CompoundTools/_CommandCompoundFilter.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/WizardShaft/WizardShaftTable.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/WizardShaft/WizardShaftTable.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 3%] Built target Material [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/Readme.txt to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/Readme.txt [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/CompoundTools/_CommandExplodeCompound.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/CompoundTools/_CommandExplodeCompound.py [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/WizardShaft/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/WizardShaft/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/CompoundTools/_CommandExplodeCompound.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/CompoundTools/_CommandExplodeCompound.py [ 3%] Building C object src/Base/CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxxextensions.c.o [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/Steel-Generic.FCMat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-Generic.FCMat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/WizardShaft/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/WizardShaft/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/Readme.txt /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/Readme.txt cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/cc -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxxextensions.c.o -c /usr/src/CXX/cxxextensions.c gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/Steel-Generic.FCMat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/Steel-Generic.FCMat [ 3%] Built target WizardShaft /usr/bin/gmake -f src/Mod/PartDesign/CMakeFiles/PartDesignScripts.dir/build.make src/Mod/PartDesign/CMakeFiles/PartDesignScripts.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/CMakeFiles/PartDesignScripts.dir/DependInfo.cmake --color= [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/CompoundTools/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/CompoundTools/__init__.py [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/TEMPLATE.FCMat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/TEMPLATE.FCMat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/TEMPLATE.FCMat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/TEMPLATE.FCMat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/CompoundTools/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/CompoundTools/__init__.py Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/CMakeFiles/PartDesignScripts.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/CMakeFiles/PartDesignScripts.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/CMakeFiles/PartDesignScripts.dir/depend.internal". [ 3%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/Init.py Scanning dependencies of target PartDesignScripts cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/Init.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/PartDesign/CMakeFiles/PartDesignScripts.dir/build.make src/Mod/PartDesign/CMakeFiles/PartDesignScripts.dir/build [ 4%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxx_extensions.cxx.o gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxx_extensions.cxx.o -c /usr/src/CXX/cxx_extensions.cxx [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/InitGui.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/Wood-Generic.FCMat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/Wood-Generic.FCMat [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Material && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Material/StandardMaterial/Wood-Generic.FCMat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Material/StandardMaterial/Wood-Generic.FCMat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/Init.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/JoinFeatures.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/JoinFeatures.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/JoinFeatures.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/JoinFeatures.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/MakeBottle.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/MakeBottle.py [ 4%] Built target MaterialLib cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/MakeBottle.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/MakeBottle.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/InitGui.py /usr/bin/gmake -f src/Mod/Raytracing/CMakeFiles/RaytracingScripts.dir/build.make src/Mod/Raytracing/CMakeFiles/RaytracingScripts.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/CMakeFiles/RaytracingScripts.dir/DependInfo.cmake --color= [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/TestPartApp.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/TestPartApp.py [ 4%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxxsupport.cxx.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/TestPartApp.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/TestPartApp.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxxsupport.cxx.o -c /usr/src/CXX/cxxsupport.cxx [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/InvoluteGearFeature.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/InvoluteGearFeature.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/InvoluteGearFeature.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/InvoluteGearFeature.py Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/CMakeFiles/RaytracingScripts.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/CMakeFiles/RaytracingScripts.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/CMakeFiles/RaytracingScripts.dir/depend.internal". Scanning dependencies of target RaytracingScripts [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/TestPartGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/TestPartGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/TestPartGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part/TestPartGui.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/InvoluteGearFeature.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/InvoluteGearFeature.ui /usr/bin/gmake -f src/Mod/Raytracing/CMakeFiles/RaytracingScripts.dir/build.make src/Mod/Raytracing/CMakeFiles/RaytracingScripts.dir/build [ 4%] Built target PartScripts /usr/bin/gmake -f src/Mod/Drawing/CMakeFiles/DrawingScripts.dir/build.make src/Mod/Drawing/CMakeFiles/DrawingScripts.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/InvoluteGearFeature.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/InvoluteGearFeature.ui gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/CMakeFiles/DrawingScripts.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/CMakeFiles/DrawingScripts.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/CMakeFiles/DrawingScripts.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/CMakeFiles/DrawingScripts.dir/depend.internal". Scanning dependencies of target DrawingScripts [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Raytracing/Init.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Drawing/CMakeFiles/DrawingScripts.dir/build.make src/Mod/Drawing/CMakeFiles/DrawingScripts.dir/build cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Raytracing/Init.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/DrawingExample.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Drawing/DrawingExample.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestBoolean.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestBoolean.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestBoolean.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestBoolean.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/DrawingExample.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Drawing/DrawingExample.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Raytracing/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Raytracing/InitGui.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestChamfer.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestChamfer.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestChamfer.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestChamfer.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/RaytracingExample.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Raytracing/RaytracingExample.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/DrawingPatterns.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Drawing/DrawingPatterns.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/RaytracingExample.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Raytracing/RaytracingExample.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/DrawingPatterns.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Drawing/DrawingPatterns.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestDatum.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestDatum.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestDatum.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestDatum.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Templates/LuxClassic.lxs to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Raytracing/Templates/LuxClassic.lxs cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Templates/LuxClassic.lxs /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Raytracing/Templates/LuxClassic.lxs [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/DrawingTests.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Drawing/DrawingTests.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/DrawingTests.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Drawing/DrawingTests.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Templates/LuxOutdoor.lxs to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Raytracing/Templates/LuxOutdoor.lxs cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Templates/LuxOutdoor.lxs /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Raytracing/Templates/LuxOutdoor.lxs [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestDraft.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestDraft.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Templates/ProjectStd.pov to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Raytracing/Templates/ProjectStd.pov cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Templates/ProjectStd.pov /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Raytracing/Templates/ProjectStd.pov cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestDraft.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestDraft.py [ 4%] Building C object src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/src/MEFISTO2/trte.c.o [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Drawing/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Drawing/Init.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Templates/RadiosityNormal.pov to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Raytracing/Templates/RadiosityNormal.pov cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/cc -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DMEFISTO2_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -DNDEBUG -fPIC -DMEFISTO2D_EXPORTS -pthread -o CMakeFiles/MEFISTO2.dir/src/MEFISTO2/trte.c.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Templates/RadiosityNormal.pov /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Raytracing/Templates/RadiosityNormal.pov [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestFillet.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestFillet.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Drawing/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestFillet.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestFillet.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Drawing/InitGui.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Templates/RadiosityOutdoorHQ.pov to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Raytracing/Templates/RadiosityOutdoorHQ.pov [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestHole.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestHole.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Templates/RadiosityOutdoorHQ.pov /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Raytracing/Templates/RadiosityOutdoorHQ.pov [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A0_Landscape_ISO7200.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A0_Landscape_ISO7200.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestHole.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestHole.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A0_Landscape_ISO7200.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A0_Landscape_ISO7200.svg gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestLinearPattern.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestLinearPattern.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestLinearPattern.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestLinearPattern.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A0_Landscape_plain.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A0_Landscape_plain.svg [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestLoft.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestLoft.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestLoft.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestLoft.py [ 4%] Built target RaytracingScripts cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A0_Landscape_plain.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A0_Landscape_plain.svg /usr/bin/gmake -f src/Mod/Sketcher/CMakeFiles/SketcherScripts.dir/build.make src/Mod/Sketcher/CMakeFiles/SketcherScripts.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/CMakeFiles/SketcherScripts.dir/DependInfo.cmake --color= [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestMirrored.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestMirrored.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestMirrored.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestMirrored.py Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/CMakeFiles/SketcherScripts.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/CMakeFiles/SketcherScripts.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/CMakeFiles/SketcherScripts.dir/depend.internal". Scanning dependencies of target SketcherScripts gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Sketcher/CMakeFiles/SketcherScripts.dir/build.make src/Mod/Sketcher/CMakeFiles/SketcherScripts.dir/build [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A0_Portrait_plain.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A0_Portrait_plain.svg gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A0_Portrait_plain.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A0_Portrait_plain.svg [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestMultiTransform.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestMultiTransform.py [ 4%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_Downward.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestMultiTransform.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestMultiTransform.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_Downward.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_Downward.cpp [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Sketcher/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Sketcher/Init.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A1_Landscape_ISO7200.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A1_Landscape_ISO7200.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A1_Landscape_ISO7200.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A1_Landscape_ISO7200.svg [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Sketcher/InitGui.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestPad.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestPad.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Sketcher/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestPad.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestPad.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A1_Landscape_plain.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A1_Landscape_plain.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A1_Landscape_plain.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A1_Landscape_plain.svg [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/ProfileLib/Hexagon.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Sketcher/ProfileLib/Hexagon.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A1_Portrait_plain.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A1_Portrait_plain.svg [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestPipe.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestPipe.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestPipe.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestPipe.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/ProfileLib/Hexagon.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Sketcher/ProfileLib/Hexagon.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A1_Portrait_plain.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A1_Portrait_plain.svg [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/ProfileLib/RegularPolygon.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Sketcher/ProfileLib/RegularPolygon.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/ProfileLib/RegularPolygon.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Sketcher/ProfileLib/RegularPolygon.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestPocket.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestPocket.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A2_Landscape_ISO7200.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A2_Landscape_ISO7200.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestPocket.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestPocket.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A2_Landscape_ISO7200.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A2_Landscape_ISO7200.svg [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/ProfileLib/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Sketcher/ProfileLib/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/ProfileLib/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Sketcher/ProfileLib/__init__.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestPolarPattern.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestPolarPattern.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestPolarPattern.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestPolarPattern.py [ 5%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Profiles.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Sketcher/Profiles.py [ 4%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A2_Landscape_plain.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A2_Landscape_plain.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A2_Landscape_plain.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A2_Landscape_plain.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Profiles.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Sketcher/Profiles.py [ 5%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/SketcherExample.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Sketcher/SketcherExample.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/SketcherExample.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Sketcher/SketcherExample.py [ 5%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A2_Portrait_plain.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A2_Portrait_plain.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A2_Portrait_plain.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A2_Portrait_plain.svg [ 5%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestPrimitive.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestPrimitive.py [ 5%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/TestSketcherApp.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Sketcher/TestSketcherApp.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestPrimitive.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestPrimitive.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/TestSketcherApp.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Sketcher/TestSketcherApp.py [ 5%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A3_Landscape.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A3_Landscape.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A3_Landscape.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A3_Landscape.svg [ 5%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestRevolve.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestRevolve.py [ 5%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/TestSketcherGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Sketcher/TestSketcherGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/TestSketcherGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Sketcher/TestSketcherGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestRevolve.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestRevolve.py [ 5%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A3_Landscape_ISO7200.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A3_Landscape_ISO7200.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A3_Landscape_ISO7200.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A3_Landscape_ISO7200.svg gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 5%] Built target SketcherScripts [ 5%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestShapeBinder.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestShapeBinder.py [ 5%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/usr/src/CXX/IndirectPythonInterface.cxx.o [ 6%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A3_Landscape_plain.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A3_Landscape_plain.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A3_Landscape_plain.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A3_Landscape_plain.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestShapeBinder.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestShapeBinder.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/usr/src/CXX/IndirectPythonInterface.cxx.o -c /usr/src/CXX/IndirectPythonInterface.cxx [ 6%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestThickness.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestThickness.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/TestThickness.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/TestThickness.py [ 6%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A3_Portrait_plain.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A3_Portrait_plain.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A3_Portrait_plain.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A3_Portrait_plain.svg [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/__init__.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A4_Landscape.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A4_Landscape.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A4_Landscape.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A4_Landscape.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/PartDesignTests/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/PartDesignTests/__init__.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A4_Landscape_ISO7200.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A4_Landscape_ISO7200.svg [ 7%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/src/Driver/Driver_SMDS_Mesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A4_Landscape_ISO7200.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A4_Landscape_ISO7200.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DDriver_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/Driver.dir/src/Driver/Driver_SMDS_Mesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver/Driver_SMDS_Mesh.cpp [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Scripts/DistanceBolt.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/Scripts/DistanceBolt.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A4_Landscape_plain.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A4_Landscape_plain.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A4_Landscape_plain.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A4_Landscape_plain.svg [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Scripts/Epitrochoid.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/Scripts/Epitrochoid.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Scripts/DistanceBolt.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/Scripts/DistanceBolt.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Scripts/Epitrochoid.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/Scripts/Epitrochoid.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A4_Portrait_ISO7200.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A4_Portrait_ISO7200.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A4_Portrait_ISO7200.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A4_Portrait_ISO7200.svg [ 7%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/Driver.dir/src/Driver/Driver_SMESHDS_Mesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DDriver_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/Driver.dir/src/Driver/Driver_SMESHDS_Mesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver/Driver_SMESHDS_Mesh.cpp [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Scripts/FilletArc.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/Scripts/FilletArc.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Scripts/FilletArc.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/Scripts/FilletArc.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Scripts/Gear.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/Scripts/Gear.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A4_Portrait_plain.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A4_Portrait_plain.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Scripts/Gear.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/Scripts/Gear.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Templates/A4_Portrait_plain.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Templates/A4_Portrait_plain.svg [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Scripts/Parallelepiped.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/Scripts/Parallelepiped.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Scripts/Parallelepiped.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/Scripts/Parallelepiped.py [ 7%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxx_exceptions.cxx.o gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxx_exceptions.cxx.o -c /usr/src/CXX/cxx_exceptions.cxx [ 7%] Built target DrawingScripts /usr/bin/gmake -f src/Mod/Robot/CMakeFiles/RobotScripts.dir/build.make src/Mod/Robot/CMakeFiles/RobotScripts.dir/depend [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Scripts/RadialCopy.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/Scripts/RadialCopy.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Scripts/RadialCopy.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/Scripts/RadialCopy.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/CMakeFiles/RobotScripts.dir/DependInfo.cmake --color= [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Scripts/Spring.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/Scripts/Spring.py Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/CMakeFiles/RobotScripts.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/CMakeFiles/RobotScripts.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/CMakeFiles/RobotScripts.dir/depend.internal". cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Scripts/Spring.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/Scripts/Spring.py Scanning dependencies of target RobotScripts gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Robot/CMakeFiles/RobotScripts.dir/build.make src/Mod/Robot/CMakeFiles/RobotScripts.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Robot/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Robot/Init.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Scripts/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/Scripts/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Scripts/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/Scripts/__init__.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/TestPartDesignApp.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/TestPartDesignApp.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Robot/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/TestPartDesignApp.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/TestPartDesignApp.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Robot/InitGui.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/TestPartDesignGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/TestPartDesignGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/TestPartDesignGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/TestPartDesignGui.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/__init__.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/fcgear/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/fcgear/__init__.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/MovieTool.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Robot/MovieTool.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/MovieTool.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Robot/MovieTool.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/KukaExporter.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Robot/KukaExporter.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/KukaExporter.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Robot/KukaExporter.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/fcgear/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/fcgear/__init__.py /usr/bin/gmake -f src/Mod/ReverseEngineering/CMakeFiles/ReverseEngineeringScripts.dir/build.make src/Mod/ReverseEngineering/CMakeFiles/ReverseEngineeringScripts.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/CMakeFiles/ReverseEngineeringScripts.dir/DependInfo.cmake --color= [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/RobotExample.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Robot/RobotExample.py Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/CMakeFiles/ReverseEngineeringScripts.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/CMakeFiles/ReverseEngineeringScripts.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/CMakeFiles/ReverseEngineeringScripts.dir/depend.internal". cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/RobotExample.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Robot/RobotExample.py Scanning dependencies of target ReverseEngineeringScripts [ 7%] Linking CXX shared library ../../../lib/libDriver.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/cmake -E cmake_link_script CMakeFiles/Driver.dir/link.txt --verbose=1 gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/fcgear/fcgear.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/fcgear/fcgear.py /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,libDriver.so -o ../../../lib/libDriver.so CMakeFiles/Driver.dir/src/Driver/Driver_Document.cpp.o CMakeFiles/Driver.dir/src/Driver/Driver_Mesh.cpp.o CMakeFiles/Driver.dir/src/Driver/Driver_SMDS_Mesh.cpp.o CMakeFiles/Driver.dir/src/Driver/Driver_SMESHDS_Mesh.cpp.o -lmpi_cxx -lmpi /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKXDESTEP.so.7.4.1 /usr/lib64/libTKXDEIGES.so.7.4.1 /usr/lib64/libTKMeshVS.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKXCAF.so.7.4.1 /usr/lib64/libTKVCAF.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKV3d.so.7.4.1 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKService.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so -lfontconfig -lGL -lX11 -lXext -lXmu -lXi /usr/lib64/libfreetype.so /usr/bin/gmake -f src/Mod/ReverseEngineering/CMakeFiles/ReverseEngineeringScripts.dir/build.make src/Mod/ReverseEngineering/CMakeFiles/ReverseEngineeringScripts.dir/build cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/fcgear/fcgear.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/fcgear/fcgear.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/ReverseEngineering/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/ReverseEngineering/Init.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/RobotExampleTrajectoryOutOfShapes.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Robot/RobotExampleTrajectoryOutOfShapes.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/RobotExampleTrajectoryOutOfShapes.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Robot/RobotExampleTrajectoryOutOfShapes.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/ReverseEngineering/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/ReverseEngineering/InitGui.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr125_2.pdf to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr125_2.pdf cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr125_2.pdf /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr125_2.pdf gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/fcgear/fcgeardialog.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/fcgear/fcgeardialog.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/fcgear/fcgeardialog.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/fcgear/fcgeardialog.py [ 7%] Built target ReverseEngineeringScripts [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr125_3.wrl to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr125_3.wrl [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/fcgear/involute.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/fcgear/involute.py /usr/bin/gmake -f src/Mod/Draft/CMakeFiles/Draft.dir/build.make src/Mod/Draft/CMakeFiles/Draft.dir/depend cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr125_3.wrl /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr125_3.wrl cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/fcgear/involute.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/fcgear/involute.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/CMakeFiles/Draft.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/CMakeFiles/Draft.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/CMakeFiles/Draft.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/CMakeFiles/Draft.dir/depend.internal". Scanning dependencies of target Draft gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Draft/CMakeFiles/Draft.dir/build.make src/Mod/Draft/CMakeFiles/Draft.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/Draft.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/Draft.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/Draft.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/Draft.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr16.wrl to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr16.wrl [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/fcgear/svggear.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/fcgear/svggear.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/fcgear/svggear.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign/fcgear/svggear.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr16.wrl /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr16.wrl [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/DraftGeomUtils.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/DraftGeomUtils.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/DraftGeomUtils.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/DraftGeomUtils.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr210.WRL to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr210.WRL [ 7%] Built target PartDesignScripts /usr/bin/gmake -f src/Mod/Web/CMakeFiles/WebScripts.dir/build.make src/Mod/Web/CMakeFiles/WebScripts.dir/depend cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr210.WRL /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr210.WRL gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/CMakeFiles/WebScripts.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/CMakeFiles/WebScripts.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/CMakeFiles/WebScripts.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/CMakeFiles/WebScripts.dir/depend.internal". Scanning dependencies of target WebScripts gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Web/CMakeFiles/WebScripts.dir/build.make src/Mod/Web/CMakeFiles/WebScripts.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Web/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Web/Init.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/DraftGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/DraftGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/DraftGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/DraftGui.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Web/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Web/InitGui.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/DraftSnap.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/DraftSnap.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr500_1.csv to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr500_1.csv cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr500_1.csv /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr500_1.csv cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/DraftSnap.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/DraftSnap.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/DraftTools.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/DraftTools.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr500_1.wrl to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr500_1.wrl cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/DraftTools.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/DraftTools.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/TestWebGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Web/TestWebGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr500_1.wrl /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr500_1.wrl cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/TestWebGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Web/TestWebGui.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/DraftTrackers.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/DraftTrackers.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/DraftTrackers.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/DraftTrackers.py [ 7%] Built target WebScripts [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr_125.csv to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_125.csv /usr/bin/gmake -f src/Mod/Surface/CMakeFiles/SurfaceScripts.dir/build.make src/Mod/Surface/CMakeFiles/SurfaceScripts.dir/depend cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr_125.csv /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_125.csv gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/CMakeFiles/SurfaceScripts.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/CMakeFiles/SurfaceScripts.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/CMakeFiles/SurfaceScripts.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/CMakeFiles/SurfaceScripts.dir/depend.internal". Scanning dependencies of target SurfaceScripts [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/DraftVecUtils.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/DraftVecUtils.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/DraftVecUtils.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/DraftVecUtils.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr_16.csv to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_16.csv gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Surface/CMakeFiles/SurfaceScripts.dir/build.make src/Mod/Surface/CMakeFiles/SurfaceScripts.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr_16.csv /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_16.csv [ 7%] Generating Draft_rc.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft && /usr/bin/rcc-qt5 --generator=python --compress-algo=zlib --compress=1 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/Resources/Draft.qrc -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/Draft_rc.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Surface/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Surface/Init.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr_16.pdf to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_16.pdf cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr_16.pdf /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_16.pdf [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Surface/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Surface/InitGui.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 7%] Built target SurfaceScripts /usr/bin/gmake -f src/Mod/Start/CMakeFiles/StartScripts.dir/build.make src/Mod/Start/CMakeFiles/StartScripts.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/CMakeFiles/StartScripts.dir/DependInfo.cmake --color= [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr_210_2.csv to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_210_2.csv cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr_210_2.csv /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_210_2.csv Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/CMakeFiles/StartScripts.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/CMakeFiles/StartScripts.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/CMakeFiles/StartScripts.dir/depend.internal". Scanning dependencies of target StartScripts gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Start/CMakeFiles/StartScripts.dir/build.make src/Mod/Start/CMakeFiles/StartScripts.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Start/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Start/Init.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr_210_2.pdf to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_210_2.pdf cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr_210_2.pdf /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_210_2.pdf [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Start/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Start/InitGui.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr_500_2.pdf to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_500_2.pdf cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Lib/Kuka/kr_500_2.pdf /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_500_2.pdf gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 7%] Built target StartScripts /usr/bin/gmake -f src/Mod/Start/StartPage/CMakeFiles/StartPage.dir/build.make src/Mod/Start/StartPage/CMakeFiles/StartPage.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage/CMakeFiles/StartPage.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage/CMakeFiles/StartPage.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage/CMakeFiles/StartPage.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage/CMakeFiles/StartPage.dir/depend.internal". Scanning dependencies of target StartPage gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Start/StartPage/CMakeFiles/StartPage.dir/build.make src/Mod/Start/StartPage/CMakeFiles/StartPage.dir/build gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/StartPage.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Start/StartPage/StartPage.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/StartPage.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Start/StartPage/StartPage.py [ 7%] Built target RobotScripts /usr/bin/gmake -f src/Mod/Idf/CMakeFiles/Idf.dir/build.make src/Mod/Idf/CMakeFiles/Idf.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf/CMakeFiles/Idf.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf/CMakeFiles/Idf.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf/CMakeFiles/Idf.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf/CMakeFiles/Idf.dir/depend.internal". Scanning dependencies of target Idf gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Idf/CMakeFiles/Idf.dir/build.make src/Mod/Idf/CMakeFiles/Idf.dir/build [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/TranslationTexts.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Start/StartPage/TranslationTexts.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/TranslationTexts.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Start/StartPage/TranslationTexts.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idf.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idf.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idf.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idf.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Start/StartPage/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Start/StartPage/__init__.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/0603_SMD.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/0603_SMD.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/0603_SMD.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/0603_SMD.stp [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/EnableDownload.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/EnableDownload.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/EnableDownload.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/EnableDownload.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/0805_SMD.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/0805_SMD.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/0805_SMD.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/0805_SMD.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft && sed -i /^#\ /d /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/Draft_rc.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/LoadCustom.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/LoadCustom.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/LoadCustom.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/LoadCustom.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/LoadExample.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/LoadExample.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/LoadExample.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/LoadExample.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/1206_SMD.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/1206_SMD.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/1206_SMD.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/1206_SMD.stp [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/1210_SMD.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/1210_SMD.stp [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/LoadMRU.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/LoadMRU.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/LoadMRU.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/LoadMRU.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/1210_SMD.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/1210_SMD.stp [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/LoadNew.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/LoadNew.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/LoadNew.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/LoadNew.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/StartPage.css to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/StartPage.css cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/StartPage.css /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/StartPage.css [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/1812_SMD.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/1812_SMD.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/1812_SMD.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/1812_SMD.stp [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/2225_SMD.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/2225_SMD.stp [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/StartPage.html to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/StartPage.html cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/StartPage.html /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/StartPage.html cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/2225_SMD.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/2225_SMD.stp [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/2512_SMD.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/2512_SMD.stp [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/StartPage.js to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/StartPage.js cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/2512_SMD.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/2512_SMD.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/StartPage.js /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/StartPage.js [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/Init.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/CAP_50SGV_8_10.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/CAP_50SGV_8_10.stp [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/images/developerhub.png to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/images/developerhub.png cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/CAP_50SGV_8_10.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/CAP_50SGV_8_10.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/images/developerhub.png /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/images/developerhub.png [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/InitGui.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/EPL22_6_16.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/EPL22_6_16.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/EPL22_6_16.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/EPL22_6_16.stp [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/images/freecad.png to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/images/freecad.png cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/images/freecad.png /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/images/freecad.png [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/TestDraft.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/TestDraft.py [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/I22_2_5_16.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/I22_2_5_16.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/TestDraft.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/TestDraft.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/I22_2_5_16.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/I22_2_5_16.stp [ 7%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/images/installed.png to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/images/installed.png [ 7%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Axis.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/images/installed.png /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/images/installed.png cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Axis.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Axis.cpp [ 8%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/WorkingPlane.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/WorkingPlane.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/WorkingPlane.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/WorkingPlane.py [ 8%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/I22_2_5_16withEPL22_6_16.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/I22_2_5_16withEPL22_6_16.stp [ 8%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/images/manual.png to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/images/manual.png cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/I22_2_5_16withEPL22_6_16.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/I22_2_5_16withEPL22_6_16.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/images/manual.png /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/images/manual.png [ 8%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/getSVG.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/getSVG.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/getSVG.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/getSVG.py [ 8%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/images/new_file_thumbnail.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/images/new_file_thumbnail.svg [ 8%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/MSOP_10.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/MSOP_10.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/images/new_file_thumbnail.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/images/new_file_thumbnail.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/MSOP_10.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/MSOP_10.stp [ 8%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/importAirfoilDAT.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/importAirfoilDAT.py [ 8%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/images/poweruserhub.png to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/images/poweruserhub.png cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/importAirfoilDAT.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/importAirfoilDAT.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/images/poweruserhub.png /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/images/poweruserhub.png [ 8%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/RLF_12545.igs to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/RLF_12545.igs cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/RLF_12545.igs /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/RLF_12545.igs [ 8%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/importDWG.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/importDWG.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/importDWG.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/importDWG.py [ 8%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/images/userhub.png to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/images/userhub.png cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/StartPage && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/StartPage/images/userhub.png /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/StartPage/images/userhub.png [ 8%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/RLF_12545.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/RLF_12545.stp [ 8%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/importDXF.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/importDXF.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/importDXF.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/importDXF.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/RLF_12545.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/RLF_12545.stp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 8%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/importOCA.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/importOCA.py [ 8%] Built target StartPage cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/importOCA.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/importOCA.py [ 8%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/AxisPyImp.cpp.o [ 8%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/RLF_7030.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/RLF_7030.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/AxisPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/AxisPyImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/RLF_7030.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/RLF_7030.stp [ 8%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/importSVG.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/importSVG.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/importSVG.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/importSVG.py [ 8%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SMB_DO_214AA.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SMB_DO_214AA.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SMB_DO_214AA.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SMB_DO_214AA.stp [ 8%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/Resources/icons/DraftWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Draft/Resources/icons/DraftWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/Resources/icons/DraftWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Draft/Resources/icons/DraftWorkbench.svg [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SMC_DO_214AB.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SMC_DO_214AB.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SMC_DO_214AB.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SMC_DO_214AB.stp [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SOD_323.igs to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SOD_323.igs [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/Draft_rc.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/Draft_rc.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/Draft_rc.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Draft/Draft_rc.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SOD_323.igs /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SOD_323.igs /usr/bin/gmake -f src/Mod/Import/CMakeFiles/ImportScripts.dir/build.make src/Mod/Import/CMakeFiles/ImportScripts.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/CMakeFiles/ImportScripts.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/CMakeFiles/ImportScripts.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/CMakeFiles/ImportScripts.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/CMakeFiles/ImportScripts.dir/depend.internal". Scanning dependencies of target ImportScripts [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SOD_323.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SOD_323.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SOD_323.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SOD_323.stp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Import/CMakeFiles/ImportScripts.dir/build.make src/Mod/Import/CMakeFiles/ImportScripts.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/Init.py [ 9%] Linking CXX shared library ../../../lib/libMEFISTO2.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/cmake -E cmake_link_script CMakeFiles/MEFISTO2.dir/link.txt --verbose=1 gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SOD_523.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SOD_523.stp [ 9%] Built target Draft /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,libMEFISTO2.so -o ../../../lib/libMEFISTO2.so CMakeFiles/MEFISTO2.dir/src/MEFISTO2/aptrte.cpp.o CMakeFiles/MEFISTO2.dir/src/MEFISTO2/trte.c.o -lmpi_cxx -lmpi /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKXDESTEP.so.7.4.1 /usr/lib64/libTKXDEIGES.so.7.4.1 /usr/lib64/libTKMeshVS.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKXCAF.so.7.4.1 /usr/lib64/libTKVCAF.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKV3d.so.7.4.1 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKService.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so -lfontconfig -lGL -lX11 -lXext -lXmu -lXi /usr/lib64/libfreetype.so /usr/bin/gmake -f src/Mod/Import/App/CMakeFiles/ImportPy.dir/build.make src/Mod/Import/App/CMakeFiles/ImportPy.dir/depend cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SOD_523.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SOD_523.stp gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App/CMakeFiles/ImportPy.dir/DependInfo.cmake --color= [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/InitGui.py Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App/CMakeFiles/ImportPy.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App/CMakeFiles/ImportPy.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App/CMakeFiles/ImportPy.dir/depend.internal". Scanning dependencies of target ImportPy [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SOT23.igs to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SOT23.igs gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SOT23.igs /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SOT23.igs /usr/bin/gmake -f src/Mod/Import/App/CMakeFiles/ImportPy.dir/build.make src/Mod/Import/App/CMakeFiles/ImportPy.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/gzip_utf8.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/gzip_utf8.py [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/PlmXmlParser.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/PlmXmlParser.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/PlmXmlParser.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/PlmXmlParser.py [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SOT23.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SOT23.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/gzip_utf8.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/gzip_utf8.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SOT23.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SOT23.stp [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/AggregationDataTypes.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/AggregationDataTypes.py [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/stepZ.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/stepZ.py [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SOT404.igs to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SOT404.igs cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/stepZ.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/stepZ.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SOT404.igs /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SOT404.igs cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/AggregationDataTypes.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/AggregationDataTypes.py [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SOT404.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SOT404.stp [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/Aufspannung.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/Aufspannung.stp [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/blocks10.rub to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/blocks10.rub cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/blocks10.rub /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/blocks10.rub cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/Aufspannung.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/Aufspannung.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SOT404.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SOT404.stp [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SOT428_DPAK.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SOT428_DPAK.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SOT428_DPAK.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SOT428_DPAK.stp [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/BaseType.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/BaseType.py [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SOT_323_3.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SOT_323_3.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/BaseType.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/BaseType.py [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/blocks112.rub to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/blocks112.rub cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SOT_323_3.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SOT_323_3.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/blocks112.rub /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/blocks112.rub [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/Builtin.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/Builtin.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/Builtin.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/Builtin.py [ 9%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Base64.cpp.o [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SOT_96.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SOT_96.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Base64.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Base64.cpp [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/blocks114.rub to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/blocks114.rub cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/SOT_96.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/SOT_96.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/blocks114.rub /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/blocks114.rub [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/ConstructedDataTypes.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/ConstructedDataTypes.py [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/classes14.rub to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/classes14.rub cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/ConstructedDataTypes.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/ConstructedDataTypes.py [ 9%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/TCMT1107_4.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/TCMT1107_4.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/classes14.rub /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/classes14.rub cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/TCMT1107_4.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/TCMT1107_4.stp [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/Model.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/Model.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/Model.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/Model.py [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/TSM_103_01_L_DV_A.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/TSM_103_01_L_DV_A.stp [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/entities0.rub to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/entities0.rub [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/Part21.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/Part21.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/TSM_103_01_L_DV_A.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/TSM_103_01_L_DV_A.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/Part21.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/Part21.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/entities0.rub /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/entities0.rub [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/TSM_104_01_L_DV_A.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/TSM_104_01_L_DV_A.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/TSM_104_01_L_DV_A.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/TSM_104_01_L_DV_A.stp [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/entities12.rub to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/entities12.rub cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/entities12.rub /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/entities12.rub [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/Product1.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/Product1.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/Product1.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/Product1.stp [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/TSS0P_8.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/TSS0P_8.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/TSS0P_8.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/TSS0P_8.stp [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/Rules.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/Rules.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/Rules.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/Rules.py [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/entities14.rub to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/entities14.rub [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/VC0603_SMD.stp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/VC0603_SMD.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/VC0603_SMD.stp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/VC0603_SMD.stp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/entities14.rub /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/entities14.rub [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/SCLBase.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/SCLBase.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/SCLBase.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/SCLBase.py [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/footprints_models.csv to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/footprints_models.csv [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/header0.rub to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/header0.rub cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Idflibs/footprints_models.csv /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Idflibs/footprints_models.csv [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/SimpleDataTypes.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/SimpleDataTypes.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/header0.rub /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/header0.rub cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/SimpleDataTypes.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/SimpleDataTypes.py [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/SimpleReader.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/SimpleReader.py [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/SimpleReader.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/SimpleReader.py [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/header12.rub to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/header12.rub cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Idf && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Idf/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Idf/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/header12.rub /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/header12.rub gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 10%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_EdgePosition.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_EdgePosition.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_EdgePosition.cpp [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/header14.rub to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/header14.rub [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/TypeChecker.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/TypeChecker.py [ 10%] Built target Idf cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/TypeChecker.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/TypeChecker.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/header14.rub /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/header14.rub /usr/bin/gmake -f src/Mod/Arch/CMakeFiles/Arch.dir/build.make src/Mod/Arch/CMakeFiles/Arch.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch/CMakeFiles/Arch.dir/DependInfo.cmake --color= [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/Utils.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/Utils.py Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch/CMakeFiles/Arch.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch/CMakeFiles/Arch.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch/CMakeFiles/Arch.dir/depend.internal". Scanning dependencies of target Arch cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/Utils.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/Utils.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/objects14.rub to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/objects14.rub /usr/bin/gmake -f src/Mod/Arch/CMakeFiles/Arch.dir/build.make src/Mod/Arch/CMakeFiles/Arch.dir/build cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/objects14.rub /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/objects14.rub gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/__init__.py [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/Arch.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/Arch.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/Arch.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/Arch.py [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/essa_par.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/essa_par.py [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/tables10.rub to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/tables10.rub cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/tables10.rub /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/tables10.rub cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/essa_par.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/essa_par.py [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchAxis.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchAxis.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchAxis.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchAxis.py [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchBuilding.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchBuilding.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchBuilding.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchBuilding.py [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/tables112.rub to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/tables112.rub [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/gasket1.p21 to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/gasket1.p21 cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/SCL/gasket1.p21 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/SCL/gasket1.p21 cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/tables112.rub /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/tables112.rub [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchBuildingPart.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchBuildingPart.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchBuildingPart.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchBuildingPart.py [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/automotive_design.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/automotive_design.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/automotive_design.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/automotive_design.py [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/tables114.rub to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/tables114.rub [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/ifc2x3.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/ifc2x3.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/tables114.rub /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/tables114.rub cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/ifc2x3.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/ifc2x3.py [ 10%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchCommands.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchCommands.py [ 11%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/tables20.rub to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/tables20.rub cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/tables20.rub /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/tables20.rub cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchCommands.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchCommands.py [ 11%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchComponent.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchComponent.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchComponent.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchComponent.py [ 11%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/ifc4.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/ifc4.py [ 11%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/tables212.rub to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/tables212.rub cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/ifc4.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import/ifc4.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/tables212.rub /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/tables212.rub [ 11%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/BaseClass.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/BaseClass.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/BaseClass.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 11%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchCutPlane.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchCutPlane.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchCutPlane.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchCutPlane.py [ 11%] Built target ImportPy [ 11%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/tables214.rub to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/tables214.rub /usr/bin/gmake -f src/Mod/Fem/CMakeFiles/FemGuiScriptsTarget.dir/build.make src/Mod/Fem/CMakeFiles/FemGuiScriptsTarget.dir/depend [ 11%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchEquipment.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchEquipment.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/CMakeFiles/FemGuiScriptsTarget.dir/DependInfo.cmake --color= cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchEquipment.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchEquipment.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/DxfPlate/tables214.rub /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Import/DxfPlate/tables214.rub Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/CMakeFiles/FemGuiScriptsTarget.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/CMakeFiles/FemGuiScriptsTarget.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/CMakeFiles/FemGuiScriptsTarget.dir/depend.internal". Scanning dependencies of target FemGuiScriptsTarget gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Fem/CMakeFiles/FemGuiScriptsTarget.dir/build.make src/Mod/Fem/CMakeFiles/FemGuiScriptsTarget.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 11%] Built target Driver [ 11%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/FemSelectionWidgets.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/FemSelectionWidgets.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/FemSelectionWidgets.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/FemSelectionWidgets.py /usr/bin/gmake -f src/Mod/Fem/CMakeFiles/FemScriptsTarget.dir/build.make src/Mod/Fem/CMakeFiles/FemScriptsTarget.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/CMakeFiles/FemScriptsTarget.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/CMakeFiles/FemScriptsTarget.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/CMakeFiles/FemScriptsTarget.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/CMakeFiles/FemScriptsTarget.dir/depend.internal". Scanning dependencies of target FemScriptsTarget gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 11%] Built target ImportScripts /usr/bin/gmake -f src/Mod/Fem/CMakeFiles/FemScriptsTarget.dir/build.make src/Mod/Fem/CMakeFiles/FemScriptsTarget.dir/build [ 11%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchFloor.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchFloor.py [ 11%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/ViewProviderFemConstraint.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/ViewProviderFemConstraint.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/ViewProviderFemConstraint.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/ViewProviderFemConstraint.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchFloor.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchFloor.py [ 11%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Init.py [ 11%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/BaseClassPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/BaseClassPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/BaseClassPyImp.cpp [ 11%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_TaskPanelFemSolverControl.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_TaskPanelFemSolverControl.py [ 11%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchFrame.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchFrame.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchFrame.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchFrame.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_TaskPanelFemSolverControl.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_TaskPanelFemSolverControl.py [ 11%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/InitGui.py [ 12%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemConstraintBodyHeatSource.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemConstraintBodyHeatSource.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemConstraintBodyHeatSource.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemConstraintBodyHeatSource.py [ 12%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchMaterial.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchMaterial.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchMaterial.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchMaterial.py [ 12%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/ObjectsFem.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/ObjectsFem.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/ObjectsFem.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/ObjectsFem.py [ 12%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemConstraintElectrostaticPotential.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemConstraintElectrostaticPotential.py [ 12%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchNesting.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchNesting.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemConstraintElectrostaticPotential.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemConstraintElectrostaticPotential.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchNesting.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchNesting.py [ 12%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/TestFem.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/TestFem.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/TestFem.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/TestFem.py [ 12%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femcommands/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femcommands/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femcommands/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femcommands/__init__.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchPanel.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchPanel.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemConstraintFlowVelocity.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemConstraintFlowVelocity.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchPanel.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchPanel.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemConstraintFlowVelocity.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemConstraintFlowVelocity.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchPipe.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchPipe.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femcommands/commands.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femcommands/commands.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femcommands/commands.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femcommands/commands.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchPipe.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchPipe.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemConstraintInitialFlowVelocity.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemConstraintInitialFlowVelocity.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemConstraintInitialFlowVelocity.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemConstraintInitialFlowVelocity.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchPrecast.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchPrecast.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femcommands/manager.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femcommands/manager.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femcommands/manager.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femcommands/manager.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchPrecast.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchPrecast.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemConstraintSelfWeight.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemConstraintSelfWeight.py [ 13%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_FaceOfEdges.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemConstraintSelfWeight.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemConstraintSelfWeight.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_FaceOfEdges.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_FaceOfEdges.cpp [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemElementFluid1D.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemElementFluid1D.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemElementFluid1D.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemElementFluid1D.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchProfile.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchProfile.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemElementGeometry1D.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemElementGeometry1D.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemElementGeometry1D.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemElementGeometry1D.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchProfile.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchProfile.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/__init__.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemElementGeometry2D.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemElementGeometry2D.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchRebar.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchRebar.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchRebar.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchRebar.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/convert2TetGen.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/convert2TetGen.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemElementGeometry2D.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemElementGeometry2D.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/convert2TetGen.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/convert2TetGen.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemElementRotation1D.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemElementRotation1D.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemElementRotation1D.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemElementRotation1D.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/importCcxDatResults.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/importCcxDatResults.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchReference.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchReference.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/importCcxDatResults.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/importCcxDatResults.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchReference.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchReference.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemMaterial.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemMaterial.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemMaterial.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemMaterial.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemMaterialMechanicalNonlinear.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemMaterialMechanicalNonlinear.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemMaterialMechanicalNonlinear.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemMaterialMechanicalNonlinear.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/importCcxFrdResults.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/importCcxFrdResults.py In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/AxisPyImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/AxisPy.cpp:83:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 83 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/AxisPy.cpp:83:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/importCcxFrdResults.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/importCcxFrdResults.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchRoof.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchRoof.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchRoof.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchRoof.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/importFenicsMesh.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/importFenicsMesh.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/importFenicsMesh.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/importFenicsMesh.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemMeshBoundaryLayer.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemMeshBoundaryLayer.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemMeshBoundaryLayer.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemMeshBoundaryLayer.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/importInpMesh.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/importInpMesh.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchSchedule.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchSchedule.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/importInpMesh.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/importInpMesh.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemMeshGmsh.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemMeshGmsh.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchSchedule.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchSchedule.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemMeshGmsh.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemMeshGmsh.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/importToolsFem.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/importToolsFem.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchSectionPlane.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchSectionPlane.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/importToolsFem.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/importToolsFem.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchSectionPlane.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchSectionPlane.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemMeshGroup.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemMeshGroup.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemMeshGroup.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemMeshGroup.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/importVTKResults.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/importVTKResults.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/importVTKResults.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/importVTKResults.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchSite.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchSite.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchSite.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchSite.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemMeshRegion.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemMeshRegion.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemMeshRegion.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemMeshRegion.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchSpace.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchSpace.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemMeshResult.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemMeshResult.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/importZ88Mesh.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/importZ88Mesh.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchSpace.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchSpace.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/importZ88Mesh.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/importZ88Mesh.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemMeshResult.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemMeshResult.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchStairs.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchStairs.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemResultMechanical.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemResultMechanical.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchStairs.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchStairs.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/importZ88O2Results.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/importZ88O2Results.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemResultMechanical.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemResultMechanical.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/importZ88O2Results.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/importZ88O2Results.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchStructure.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchStructure.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/readFenicsXDMF.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/readFenicsXDMF.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchStructure.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchStructure.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemSolverCalculix.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemSolverCalculix.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/readFenicsXDMF.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/readFenicsXDMF.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/_ViewProviderFemSolverCalculix.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/_ViewProviderFemSolverCalculix.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchVRM.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchVRM.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchVRM.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchVRM.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/readFenicsXML.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/readFenicsXML.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/readFenicsXML.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/readFenicsXML.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femguiobjects/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femguiobjects/__init__.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchWall.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchWall.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchWall.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchWall.py [ 13%] Built target FemGuiScriptsTarget [ 13%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_FaceOfNodes.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_FaceOfNodes.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_FaceOfNodes.cpp [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/writeFenicsXDMF.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/writeFenicsXDMF.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/writeFenicsXDMF.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/writeFenicsXDMF.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchWindow.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchWindow.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/ArchWindow.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/ArchWindow.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/writeFenicsXML.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/writeFenicsXML.py [ 13%] Generating Arch_rc.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/rcc-qt5 --generator=python --compress-algo=zlib --compress=1 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/Resources/Arch.qrc -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch/Arch_rc.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/feminout/writeFenicsXML.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/feminout/writeFenicsXML.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femmesh/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femmesh/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femmesh/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femmesh/__init__.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femmesh/femmesh2mesh.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femmesh/femmesh2mesh.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femmesh/femmesh2mesh.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femmesh/femmesh2mesh.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femmesh/gmshtools.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femmesh/gmshtools.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femmesh/gmshtools.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femmesh/gmshtools.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femmesh/meshtools.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femmesh/meshtools.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femmesh/meshtools.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femmesh/meshtools.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/FemConstraint.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/FemConstraint.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/FemConstraint.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/FemConstraint.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemConstraintBodyHeatSource.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemConstraintBodyHeatSource.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemConstraintBodyHeatSource.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemConstraintBodyHeatSource.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemConstraintElectrostaticPotential.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemConstraintElectrostaticPotential.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemConstraintElectrostaticPotential.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemConstraintElectrostaticPotential.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemConstraintFlowVelocity.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemConstraintFlowVelocity.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemConstraintFlowVelocity.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemConstraintFlowVelocity.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemConstraintInitialFlowVelocity.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemConstraintInitialFlowVelocity.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemConstraintInitialFlowVelocity.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemConstraintInitialFlowVelocity.py [ 13%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_FacePosition.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_FacePosition.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_FacePosition.cpp [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/Dice3DS/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/Dice3DS/__init__.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemConstraintSelfWeight.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemConstraintSelfWeight.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/Dice3DS/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/Dice3DS/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemConstraintSelfWeight.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemConstraintSelfWeight.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/Dice3DS/dom3ds.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/Dice3DS/dom3ds.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/Dice3DS/dom3ds.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/Dice3DS/dom3ds.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemElementFluid1D.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemElementFluid1D.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemElementFluid1D.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemElementFluid1D.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemElementGeometry1D.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemElementGeometry1D.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemElementGeometry1D.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemElementGeometry1D.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/Dice3DS/util.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/Dice3DS/util.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/Dice3DS/util.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/Dice3DS/util.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemElementGeometry2D.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemElementGeometry2D.py [ 13%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_IteratorOfElements.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemElementGeometry2D.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemElementGeometry2D.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_IteratorOfElements.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_IteratorOfElements.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && sed -i /^#\ /d /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch/Arch_rc.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemElementRotation1D.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemElementRotation1D.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemElementRotation1D.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemElementRotation1D.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemMaterial.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemMaterial.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemMaterial.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemMaterial.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemMaterialMechanicalNonlinear.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemMaterialMechanicalNonlinear.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemMaterialMechanicalNonlinear.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemMaterialMechanicalNonlinear.py In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/BaseClassPyImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/BaseClassPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/BaseClassPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemMeshBoundaryLayer.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemMeshBoundaryLayer.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemMeshBoundaryLayer.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemMeshBoundaryLayer.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/Init.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/InitGui.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemMeshGmsh.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemMeshGmsh.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemMeshGmsh.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemMeshGmsh.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/TestArch.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/TestArch.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/TestArch.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/TestArch.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemMeshGroup.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemMeshGroup.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemMeshGroup.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemMeshGroup.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/import3DS.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/import3DS.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/import3DS.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/import3DS.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/importDAE.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/importDAE.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemMeshRegion.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemMeshRegion.py [ 13%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/BoundBoxPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/BoundBoxPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/BoundBoxPyImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/importDAE.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/importDAE.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemMeshRegion.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemMeshRegion.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemMeshResult.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemMeshResult.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/importIFC.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/importIFC.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/importIFC.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/importIFC.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemMeshResult.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemMeshResult.py [ 13%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_LinearEdge.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_LinearEdge.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_LinearEdge.cpp [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/importIFClegacy.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/importIFClegacy.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemResultMechanical.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemResultMechanical.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/importIFClegacy.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/importIFClegacy.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemResultMechanical.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemResultMechanical.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/importJSON.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/importJSON.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/importJSON.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/importJSON.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemSolverCalculix.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemSolverCalculix.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/_FemSolverCalculix.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/_FemSolverCalculix.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/importOBJ.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/importOBJ.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/importOBJ.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/importOBJ.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/__init__.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/importSH3D.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/importSH3D.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femobjects/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femobjects/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/importSH3D.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/importSH3D.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/importWebGL.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/importWebGL.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/importWebGL.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/importWebGL.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/Presets/profiles.csv to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Arch/Presets/profiles.csv cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/Presets/profiles.csv /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Arch/Presets/profiles.csv [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femresult/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femresult/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femresult/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femresult/__init__.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femresult/resulttools.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femresult/resulttools.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femresult/resulttools.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femresult/resulttools.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/Presets/pset_definitions.csv to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Arch/Presets/pset_definitions.csv cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/Presets/pset_definitions.csv /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Arch/Presets/pset_definitions.csv [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/__init__.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/Resources/icons/ArchWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Arch/Resources/icons/ArchWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Arch/Resources/icons/ArchWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Arch/Resources/icons/ArchWorkbench.svg [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch/Arch_rc.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/Arch_rc.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Arch/Arch_rc.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Arch/Arch_rc.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/calculix/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/calculix/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/calculix/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/calculix/__init__.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/calculix/solver.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/calculix/solver.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/calculix/solver.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/calculix/solver.py [ 13%] Built target Arch /usr/bin/gmake -f src/Mod/Fem/Gui/CMakeFiles/FemPythonUi.dir/build.make src/Mod/Fem/Gui/CMakeFiles/FemPythonUi.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/CMakeFiles/FemPythonUi.dir/DependInfo.cmake --color= [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/calculix/tasks.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/calculix/tasks.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/calculix/tasks.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/calculix/tasks.py Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/CMakeFiles/FemPythonUi.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/CMakeFiles/FemPythonUi.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/CMakeFiles/FemPythonUi.dir/depend.internal". Scanning dependencies of target FemPythonUi gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Fem/Gui/CMakeFiles/FemPythonUi.dir/build.make src/Mod/Fem/Gui/CMakeFiles/FemPythonUi.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/calculix/writer.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/calculix/writer.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/ElectrostaticPotential.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/ElectrostaticPotential.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/ElectrostaticPotential.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/ElectrostaticPotential.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/calculix/writer.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/calculix/writer.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/ElementFluid1D.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/ElementFluid1D.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/ElementFluid1D.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/ElementFluid1D.ui [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/__init__.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/ElementGeometry1D.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/ElementGeometry1D.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/ElementGeometry1D.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/ElementGeometry1D.ui [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/ElementGeometry2D.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/ElementGeometry2D.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/ElementGeometry2D.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/ElementGeometry2D.ui [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/ElementRotation1D.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/ElementRotation1D.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/ElementRotation1D.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/ElementRotation1D.ui [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/equations/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/equations/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/equations/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/equations/__init__.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/FlowVelocity.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/FlowVelocity.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/FlowVelocity.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/FlowVelocity.ui [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/InitialFlowVelocity.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/InitialFlowVelocity.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/InitialFlowVelocity.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/InitialFlowVelocity.ui [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/equations/elasticity.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/equations/elasticity.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/equations/elasticity.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/equations/elasticity.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/Material.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/Material.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/Material.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/Material.ui [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/equations/electrostatic.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/equations/electrostatic.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/equations/electrostatic.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/equations/electrostatic.py [ 13%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_Mesh.cpp.o [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/MeshBoundaryLayer.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/MeshBoundaryLayer.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_Mesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/MeshBoundaryLayer.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/MeshBoundaryLayer.ui [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/equations/equation.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/equations/equation.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/equations/equation.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/equations/equation.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/MeshGmsh.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/MeshGmsh.ui [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/equations/flow.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/equations/flow.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/equations/flow.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/equations/flow.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/MeshGmsh.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/MeshGmsh.ui [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/equations/fluxsolver.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/equations/fluxsolver.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/equations/fluxsolver.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/equations/fluxsolver.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/MeshGroup.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/MeshGroup.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/MeshGroup.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/MeshGroup.ui [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/equations/heat.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/equations/heat.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/equations/heat.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/equations/heat.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/equations/linear.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/equations/linear.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/equations/linear.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/equations/linear.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/MeshGroupXDMFExport.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/MeshGroupXDMFExport.ui [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/equations/nonlinear.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/equations/nonlinear.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/equations/nonlinear.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/equations/nonlinear.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/MeshGroupXDMFExport.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/MeshGroupXDMFExport.ui [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/sifio.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/sifio.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/sifio.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/sifio.py [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/MeshRegion.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/MeshRegion.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/MeshRegion.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/MeshRegion.ui [ 13%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/solver.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/solver.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/solver.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/solver.py [ 14%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/ResultShow.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/ResultShow.ui [ 14%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/tasks.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/tasks.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/ResultShow.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/ResultShow.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/tasks.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/tasks.py [ 14%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/SolverCalculix.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/SolverCalculix.ui [ 14%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/writer.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/writer.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/ui/SolverCalculix.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/Resources/ui/SolverCalculix.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/elmer/writer.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/elmer/writer.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 14%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/equationbase.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/equationbase.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/equationbase.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/equationbase.py [ 14%] Built target FemPythonUi [ 14%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/fenics/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/fenics/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/fenics/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/fenics/__init__.py /usr/bin/gmake -f src/Mod/Ship/CMakeFiles/Ship.dir/build.make src/Mod/Ship/CMakeFiles/Ship.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship/CMakeFiles/Ship.dir/DependInfo.cmake --color= [ 14%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/fenics/fenics_tools.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/fenics/fenics_tools.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/fenics/fenics_tools.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/fenics/fenics_tools.py Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship/CMakeFiles/Ship.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship/CMakeFiles/Ship.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship/CMakeFiles/Ship.dir/depend.internal". Scanning dependencies of target Ship gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Ship/CMakeFiles/Ship.dir/build.make src/Mod/Ship/CMakeFiles/Ship.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 14%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/report.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/report.py [ 14%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/reportdialog.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/reportdialog.py [ 14%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/reportdialog.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/reportdialog.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/report.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/report.py [ 14%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/Instance.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/Instance.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/Instance.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/Instance.py [ 14%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/settings.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/settings.py [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/run.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/run.py [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/ShipGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/ShipGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/run.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/run.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/settings.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/settings.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/ShipGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/ShipGui.py [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/signal.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/signal.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/signal.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/signal.py [ 15%] Generating Ship_rc.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/rcc-qt5 --generator=python --compress-algo=zlib --compress=1 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/resources/Ship.qrc -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship/Ship_rc.py [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/solverbase.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/solverbase.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/solverbase.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/solverbase.py [ 15%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_Mesh0DElement.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_Mesh0DElement.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_Mesh0DElement.cpp [ 15%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Builder3D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Builder3D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Builder3D.cpp [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/task.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/task.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/task.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/task.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && sed -i /^#\ /d /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship/Ship_rc.py [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/writerbase.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/writerbase.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/writerbase.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/writerbase.py [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/TankInstance.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/TankInstance.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/TankInstance.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/TankInstance.py [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/z88/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/z88/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/z88/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/z88/__init__.py [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/WeightInstance.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/WeightInstance.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/WeightInstance.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/WeightInstance.py [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/z88/solver.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/z88/solver.py [ 15%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshCell.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/z88/solver.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/z88/solver.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshCell.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshCell.cpp [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/resources/examples/s60.fcstd to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/resources/examples/s60.fcstd cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/resources/examples/s60.fcstd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/resources/examples/s60.fcstd [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/z88/tasks.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/z88/tasks.py [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/resources/examples/s60_katamaran.fcstd to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/resources/examples/s60_katamaran.fcstd cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/resources/examples/s60_katamaran.fcstd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/resources/examples/s60_katamaran.fcstd cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/z88/tasks.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/z88/tasks.py [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/z88/writer.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/z88/writer.py [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/resources/examples/wigley.fcstd to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/resources/examples/wigley.fcstd cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femsolver/z88/writer.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femsolver/z88/writer.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/resources/examples/wigley.fcstd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/resources/examples/wigley.fcstd [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/resources/examples/wigley_katamaran.fcstd to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/resources/examples/wigley_katamaran.fcstd [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/resources/examples/wigley_katamaran.fcstd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/resources/examples/wigley_katamaran.fcstd cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/__init__.py [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipAreasCurve/PlotAux.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipAreasCurve/PlotAux.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipAreasCurve/PlotAux.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipAreasCurve/PlotAux.py [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testccxtools.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testccxtools.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testccxtools.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testccxtools.py [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipAreasCurve/Preview.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipAreasCurve/Preview.py [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testcommon.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testcommon.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testcommon.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testcommon.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipAreasCurve/Preview.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipAreasCurve/Preview.py [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/__init__.py [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/Flow1D_mesh.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/Flow1D_mesh.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/Flow1D_mesh.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/Flow1D_mesh.py [ 15%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipAreasCurve/TaskPanel.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipAreasCurve/TaskPanel.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipAreasCurve/TaskPanel.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipAreasCurve/TaskPanel.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech.FCStd to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech.FCStd cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech.FCStd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech.FCStd [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech.dat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech.dat [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipAreasCurve/TaskPanel.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipAreasCurve/TaskPanel.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech.dat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech.dat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipAreasCurve/TaskPanel.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipAreasCurve/TaskPanel.ui [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech.frd to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech.frd [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipAreasCurve/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipAreasCurve/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech.frd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech.frd cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipAreasCurve/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipAreasCurve/__init__.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech.inp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech.inp [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCapacityCurve/PlotAux.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCapacityCurve/PlotAux.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech.inp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech.inp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCapacityCurve/PlotAux.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCapacityCurve/PlotAux.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCapacityCurve/TaskPanel.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCapacityCurve/TaskPanel.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCapacityCurve/TaskPanel.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCapacityCurve/TaskPanel.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech_expected_values to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech_expected_values cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech_expected_values /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech_expected_values [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCapacityCurve/TaskPanel.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCapacityCurve/TaskPanel.ui [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech_inout_nodes.txt to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech_inout_nodes.txt cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech_inout_nodes.txt /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech_inout_nodes.txt cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCapacityCurve/TaskPanel.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCapacityCurve/TaskPanel.ui [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCapacityCurve/Tools.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCapacityCurve/Tools.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCapacityCurve/Tools.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCapacityCurve/Tools.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/__init__.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCapacityCurve/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCapacityCurve/__init__.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube.FCStd to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube.FCStd cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube.FCStd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube.FCStd cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCapacityCurve/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCapacityCurve/__init__.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateLoadCondition/Tools.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateLoadCondition/Tools.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateLoadCondition/Tools.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateLoadCondition/Tools.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_frequency.FCStd to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_frequency.FCStd cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_frequency.FCStd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_frequency.FCStd [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateLoadCondition/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateLoadCondition/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateLoadCondition/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateLoadCondition/__init__.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_frequency.dat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_frequency.dat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_frequency.dat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_frequency.dat [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateShip/Preview.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateShip/Preview.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateShip/Preview.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateShip/Preview.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_frequency.frd to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_frequency.frd cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_frequency.frd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_frequency.frd [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateShip/TaskPanel.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateShip/TaskPanel.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_frequency.inp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_frequency.inp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_frequency.inp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_frequency.inp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateShip/TaskPanel.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateShip/TaskPanel.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_frequency_expected_values to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_frequency_expected_values cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_frequency_expected_values /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_frequency_expected_values [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateShip/TaskPanel.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateShip/TaskPanel.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateShip/TaskPanel.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateShip/TaskPanel.ui [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_mesh.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_mesh.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateShip/Tools.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateShip/Tools.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateShip/Tools.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateShip/Tools.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_mesh.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_mesh.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateShip/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateShip/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateShip/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateShip/__init__.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_static.FCStd to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_static.FCStd cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_static.FCStd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_static.FCStd [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateTank/TaskPanel.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateTank/TaskPanel.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateTank/TaskPanel.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateTank/TaskPanel.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_static.dat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_static.dat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_static.dat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_static.dat [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateTank/TaskPanel.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateTank/TaskPanel.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateTank/TaskPanel.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateTank/TaskPanel.ui [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_static.frd to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_static.frd cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_static.frd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_static.frd [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateTank/Tools.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateTank/Tools.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_static.inp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_static.inp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateTank/Tools.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateTank/Tools.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_static.inp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_static.inp [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateTank/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateTank/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateTank/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateTank/__init__.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_static_expected_values to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_static_expected_values cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/cube_static_expected_values /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/cube_static_expected_values [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateWeight/TaskPanel.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateWeight/TaskPanel.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateWeight/TaskPanel.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateWeight/TaskPanel.py In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/BoundBoxPyImp.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/BoundBoxPy.cpp:87:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 87 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/BoundBoxPy.cpp:87:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/multimat.inp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/multimat.inp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/multimat.inp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/multimat.inp [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateWeight/TaskPanel.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateWeight/TaskPanel.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateWeight/TaskPanel.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateWeight/TaskPanel.ui [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/multimat_mesh.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/multimat_mesh.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/multimat_mesh.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/multimat_mesh.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/spine_mesh.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/spine_mesh.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateWeight/Tools.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateWeight/Tools.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/spine_mesh.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/spine_mesh.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateWeight/Tools.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateWeight/Tools.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/spine_thermomech.FCStd to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/spine_thermomech.FCStd [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateWeight/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateWeight/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/spine_thermomech.FCStd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/spine_thermomech.FCStd cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipCreateWeight/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipCreateWeight/__init__.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/spine_thermomech.dat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/spine_thermomech.dat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/spine_thermomech.dat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/spine_thermomech.dat [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipGZ/PlotAux.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipGZ/PlotAux.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/spine_thermomech.frd to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/spine_thermomech.frd cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipGZ/PlotAux.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipGZ/PlotAux.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/spine_thermomech.frd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/spine_thermomech.frd [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipGZ/TaskPanel.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipGZ/TaskPanel.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipGZ/TaskPanel.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipGZ/TaskPanel.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/spine_thermomech.inp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/spine_thermomech.inp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/spine_thermomech.inp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/spine_thermomech.inp [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipGZ/TaskPanel.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipGZ/TaskPanel.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipGZ/TaskPanel.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipGZ/TaskPanel.ui [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/spine_thermomech_expected_values to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/spine_thermomech_expected_values cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/ccx/spine_thermomech_expected_values /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/ccx/spine_thermomech_expected_values [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipGZ/Tools.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipGZ/Tools.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipGZ/Tools.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipGZ/Tools.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/elmer/ELMERSOLVER_STARTINFO to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/elmer/ELMERSOLVER_STARTINFO cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/elmer/ELMERSOLVER_STARTINFO /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/elmer/ELMERSOLVER_STARTINFO [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipGZ/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipGZ/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipGZ/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipGZ/__init__.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/elmer/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/elmer/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/elmer/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/elmer/__init__.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipHydrostatics/PlotAux.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipHydrostatics/PlotAux.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipHydrostatics/PlotAux.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipHydrostatics/PlotAux.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/elmer/case.sif to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/elmer/case.sif cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/elmer/case.sif /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/elmer/case.sif [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipHydrostatics/TaskPanel.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipHydrostatics/TaskPanel.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipHydrostatics/TaskPanel.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipHydrostatics/TaskPanel.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/elmer/group_mesh.geo to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/elmer/group_mesh.geo cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/elmer/group_mesh.geo /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/elmer/group_mesh.geo [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipHydrostatics/TaskPanel.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipHydrostatics/TaskPanel.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipHydrostatics/TaskPanel.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipHydrostatics/TaskPanel.ui [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/mesh/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/mesh/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/mesh/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/mesh/__init__.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipHydrostatics/Tools.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipHydrostatics/Tools.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.inp to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.inp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipHydrostatics/Tools.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipHydrostatics/Tools.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.inp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.inp [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipHydrostatics/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipHydrostatics/__init__.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.unv to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.unv cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipHydrostatics/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipHydrostatics/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.unv /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.unv [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipLoadExample/TaskPanel.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipLoadExample/TaskPanel.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipLoadExample/TaskPanel.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipLoadExample/TaskPanel.py [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.vtk to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.vtk cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.vtk /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.vtk [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.z88 to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.z88 cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.z88 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.z88 [ 16%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipLoadExample/TaskPanel.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipLoadExample/TaskPanel.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipLoadExample/TaskPanel.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipLoadExample/TaskPanel.ui [ 17%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testmesh.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testmesh.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testmesh.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testmesh.py [ 17%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipLoadExample/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipLoadExample/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipLoadExample/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipLoadExample/__init__.py [ 17%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testobject.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testobject.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testobject.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testobject.py [ 17%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testresult.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testresult.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testresult.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testresult.py [ 17%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipOutlineDraw/Preview.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipOutlineDraw/Preview.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipOutlineDraw/Preview.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipOutlineDraw/Preview.py [ 17%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testsolverframework.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testsolverframework.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/testsolverframework.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/testsolverframework.py [ 17%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipOutlineDraw/TaskPanel.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipOutlineDraw/TaskPanel.py [ 17%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/utilstest.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/utilstest.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipOutlineDraw/TaskPanel.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipOutlineDraw/TaskPanel.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtest/utilstest.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtest/utilstest.py [ 17%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtools/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtools/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtools/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtools/__init__.py [ 18%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipOutlineDraw/TaskPanel.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipOutlineDraw/TaskPanel.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipOutlineDraw/TaskPanel.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipOutlineDraw/TaskPanel.ui [ 18%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtools/ccxtools.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtools/ccxtools.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtools/ccxtools.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtools/ccxtools.py [ 18%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipOutlineDraw/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipOutlineDraw/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipOutlineDraw/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipOutlineDraw/__init__.py [ 18%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtools/femutils.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtools/femutils.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/femtools/femutils.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem/femtools/femutils.py [ 18%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipUtils/Locale.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipUtils/Locale.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipUtils/Locale.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipUtils/Locale.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 18%] Built target FemScriptsTarget [ 19%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipUtils/Math.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipUtils/Math.py /usr/bin/gmake -f src/Mod/OpenSCAD/CMakeFiles/OpenSCAD.dir/build.make src/Mod/OpenSCAD/CMakeFiles/OpenSCAD.dir/depend cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipUtils/Math.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipUtils/Math.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD/CMakeFiles/OpenSCAD.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD/CMakeFiles/OpenSCAD.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD/CMakeFiles/OpenSCAD.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD/CMakeFiles/OpenSCAD.dir/depend.internal". Scanning dependencies of target OpenSCAD gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/OpenSCAD/CMakeFiles/OpenSCAD.dir/build.make src/Mod/OpenSCAD/CMakeFiles/OpenSCAD.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 19%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/Init.py [ 19%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipUtils/Paths.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipUtils/Paths.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipUtils/Paths.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipUtils/Paths.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/Init.py [ 19%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipUtils/Units.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipUtils/Units.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipUtils/Units.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipUtils/Units.py [ 19%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/InitGui.py [ 19%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshEdge.cpp.o [ 19%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipUtils/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipUtils/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/shipUtils/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/shipUtils/__init__.py [ 19%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/OpenSCAD2Dgeom.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/OpenSCAD2Dgeom.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/OpenSCAD2Dgeom.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/OpenSCAD2Dgeom.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshEdge.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshEdge.cpp [ 19%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/resources/icons/ShipWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Ship/resources/icons/ShipWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Ship/resources/icons/ShipWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Ship/resources/icons/ShipWorkbench.svg [ 19%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/OpenSCADCommands.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/OpenSCADCommands.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/OpenSCADCommands.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/OpenSCADCommands.py [ 19%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship/Ship_rc.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/Ship_rc.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Ship/Ship_rc.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Ship/Ship_rc.py [ 20%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshElement.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshElement.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshElement.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 20%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/OpenSCADFeatures.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/OpenSCADFeatures.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/OpenSCADFeatures.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/OpenSCADFeatures.py [ 20%] Built target Ship /usr/bin/gmake -f src/Mod/Plot/CMakeFiles/Plot.dir/build.make src/Mod/Plot/CMakeFiles/Plot.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot/CMakeFiles/Plot.dir/DependInfo.cmake --color= [ 20%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/OpenSCADUtils.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/OpenSCADUtils.py Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot/CMakeFiles/Plot.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot/CMakeFiles/Plot.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot/CMakeFiles/Plot.dir/depend.internal". cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/OpenSCADUtils.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/OpenSCADUtils.py Scanning dependencies of target Plot gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Plot/CMakeFiles/Plot.dir/build.make src/Mod/Plot/CMakeFiles/Plot.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 20%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/InitGui.py [ 20%] Generating OpenSCAD_rc.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD && /usr/bin/rcc-qt5 --generator=python --compress-algo=zlib --compress=1 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/Resources/OpenSCAD.qrc -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD/OpenSCAD_rc.py [ 20%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/Plot.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/Plot.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/Plot.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/Plot.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD && sed -i /^#\ /d /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD/OpenSCAD_rc.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 20%] Built target MEFISTO2 [ 20%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/PlotGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/PlotGui.py /usr/bin/gmake -f src/Mod/Spreadsheet/CMakeFiles/SpreadsheetScripts.dir/build.make src/Mod/Spreadsheet/CMakeFiles/SpreadsheetScripts.dir/depend [ 20%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/colorcodeshapes.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/colorcodeshapes.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/PlotGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/PlotGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/colorcodeshapes.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/colorcodeshapes.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/CMakeFiles/SpreadsheetScripts.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/CMakeFiles/SpreadsheetScripts.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/CMakeFiles/SpreadsheetScripts.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/CMakeFiles/SpreadsheetScripts.dir/depend.internal". Scanning dependencies of target SpreadsheetScripts [ 20%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/expandplacements.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/expandplacements.py [ 20%] Generating Plot_rc.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/expandplacements.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/expandplacements.py /usr/bin/gmake -f src/Mod/Spreadsheet/CMakeFiles/SpreadsheetScripts.dir/build.make src/Mod/Spreadsheet/CMakeFiles/SpreadsheetScripts.dir/build cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/rcc-qt5 --generator=python --compress-algo=zlib --compress=1 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/resources/Plot.qrc -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot/Plot_rc.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && sed -i /^#\ /d /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot/Plot_rc.py [ 20%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Spreadsheet/Init.py [ 20%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/exportCSG.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/exportCSG.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/exportCSG.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/exportCSG.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Spreadsheet/Init.py [ 20%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/importCSG.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/importCSG.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/importCSG.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/importCSG.py [ 20%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/replaceobj.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/replaceobj.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/replaceobj.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/replaceobj.py [ 20%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotAxes/TaskPanel.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotAxes/TaskPanel.py [ 20%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Spreadsheet/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotAxes/TaskPanel.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotAxes/TaskPanel.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Spreadsheet/InitGui.py [ 20%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/tokrules.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/tokrules.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/tokrules.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/tokrules.py [ 20%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/TestSpreadsheet.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Spreadsheet/TestSpreadsheet.py [ 20%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotAxes/TaskPanel.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotAxes/TaskPanel.ui [ 20%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/Resources/icons/OpenSCADWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/OpenSCAD/Resources/icons/OpenSCADWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/TestSpreadsheet.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Spreadsheet/TestSpreadsheet.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotAxes/TaskPanel.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotAxes/TaskPanel.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/OpenSCAD/Resources/icons/OpenSCADWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/OpenSCAD/Resources/icons/OpenSCADWorkbench.svg [ 21%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD/OpenSCAD_rc.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/OpenSCAD_rc.py [ 21%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotAxes/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotAxes/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/OpenSCAD/OpenSCAD_rc.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/OpenSCAD/OpenSCAD_rc.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotAxes/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotAxes/__init__.py [ 21%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/importXLSX.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Spreadsheet/importXLSX.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/importXLSX.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Spreadsheet/importXLSX.py [ 21%] Built target OpenSCAD /usr/bin/gmake -f src/Mod/Path/CMakeFiles/PathTests.dir/build.make src/Mod/Path/CMakeFiles/PathTests.dir/depend gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/CMakeFiles/PathTests.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/CMakeFiles/PathTests.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/CMakeFiles/PathTests.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/CMakeFiles/PathTests.dir/depend.internal". Scanning dependencies of target PathTests [ 21%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotLabels/TaskPanel.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotLabels/TaskPanel.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 21%] Built target SpreadsheetScripts /usr/bin/gmake -f src/Mod/Path/CMakeFiles/PathTests.dir/build.make src/Mod/Path/CMakeFiles/PathTests.dir/build cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotLabels/TaskPanel.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotLabels/TaskPanel.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Path/CMakeFiles/PathScripts.dir/build.make src/Mod/Path/CMakeFiles/PathScripts.dir/depend [ 21%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/Init.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/CMakeFiles/PathScripts.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/CMakeFiles/PathScripts.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/CMakeFiles/PathScripts.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/CMakeFiles/PathScripts.dir/depend.internal". Scanning dependencies of target PathScripts gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Path/CMakeFiles/PathScripts.dir/build.make src/Mod/Path/CMakeFiles/PathScripts.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 21%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotLabels/TaskPanel.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotLabels/TaskPanel.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotLabels/TaskPanel.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotLabels/TaskPanel.ui [ 21%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/InitGui.py [ 21%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Images/Ops/chamfer.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/Images/Ops/chamfer.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Images/Ops/chamfer.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/Images/Ops/chamfer.svg [ 21%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotLabels/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotLabels/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotLabels/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotLabels/__init__.py [ 21%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathCommands.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathCommands.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathCommands.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathCommands.py [ 21%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Images/Tools/drill.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/Images/Tools/drill.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Images/Tools/drill.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/Images/Tools/drill.svg [ 21%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotPositions/TaskPanel.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotPositions/TaskPanel.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotPositions/TaskPanel.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotPositions/TaskPanel.py [ 21%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/PathTestUtils.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/PathTestUtils.py [ 21%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Images/Tools/endmill.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/Images/Tools/endmill.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Images/Tools/endmill.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/Images/Tools/endmill.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/PathTestUtils.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/PathTestUtils.py [ 21%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotPositions/TaskPanel.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotPositions/TaskPanel.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotPositions/TaskPanel.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotPositions/TaskPanel.ui [ 21%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Images/Tools/v-bit.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/Images/Tools/v-bit.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Images/Tools/v-bit.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/Images/Tools/v-bit.svg [ 21%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathCore.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathCore.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathCore.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathCore.py [ 21%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotPositions/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotPositions/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotPositions/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotPositions/__init__.py [ 21%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathAdaptive.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathAdaptive.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathAdaptive.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathAdaptive.py [ 22%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathDeburr.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathDeburr.py [ 22%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotSave/TaskPanel.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotSave/TaskPanel.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotSave/TaskPanel.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotSave/TaskPanel.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathDeburr.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathDeburr.py [ 22%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathAdaptiveGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathAdaptiveGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathAdaptiveGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathAdaptiveGui.py [ 22%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotSave/TaskPanel.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotSave/TaskPanel.ui [ 22%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathAreaOp.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathAreaOp.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotSave/TaskPanel.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotSave/TaskPanel.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathAreaOp.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathAreaOp.py [ 22%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathDepthParams.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathDepthParams.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathDepthParams.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathDepthParams.py [ 22%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathArray.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathArray.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathArray.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathArray.py [ 22%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotSave/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotSave/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotSave/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotSave/__init__.py [ 22%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathCircularHoleBase.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathCircularHoleBase.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathCircularHoleBase.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathCircularHoleBase.py [ 22%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotSeries/TaskPanel.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotSeries/TaskPanel.py [ 22%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathDressupDogbone.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathDressupDogbone.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotSeries/TaskPanel.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotSeries/TaskPanel.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathDressupDogbone.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathDressupDogbone.py [ 22%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathCircularHoleBaseGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathCircularHoleBaseGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathCircularHoleBaseGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathCircularHoleBaseGui.py [ 22%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotSeries/TaskPanel.ui to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotSeries/TaskPanel.ui [ 22%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathComment.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathComment.py [ 22%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathDressupHoldingTags.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathDressupHoldingTags.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathComment.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathComment.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathDressupHoldingTags.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathDressupHoldingTags.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotSeries/TaskPanel.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotSeries/TaskPanel.ui [ 22%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathCopy.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathCopy.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathCopy.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathCopy.py [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotSeries/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotSeries/__init__.py [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathGeom.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathGeom.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathGeom.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathGeom.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotSeries/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotSeries/__init__.py [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathCustom.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathCustom.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathCustom.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathCustom.py [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotUtils/Paths.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotUtils/Paths.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotUtils/Paths.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotUtils/Paths.py [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathLog.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathLog.py [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDeburr.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDeburr.py [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotUtils/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotUtils/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDeburr.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDeburr.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/plotUtils/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/plotUtils/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathLog.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathLog.py [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDeburrGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDeburrGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDeburrGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDeburrGui.py [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathOpTools.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathOpTools.py [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/resources/icons/PlotWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Plot/resources/icons/PlotWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Plot/resources/icons/PlotWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Plot/resources/icons/PlotWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathOpTools.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathOpTools.py [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDressup.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDressup.py [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot/Plot_rc.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/Plot_rc.py [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDressupAxisMap.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDressupAxisMap.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Plot/Plot_rc.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Plot/Plot_rc.py [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathPost.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathPost.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathPost.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathPost.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDressup.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDressup.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDressupAxisMap.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDressupAxisMap.py [ 23%] Built target Plot [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathSetupSheet.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathSetupSheet.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathSetupSheet.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathSetupSheet.py [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDressupDogbone.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDressupDogbone.py /usr/bin/gmake -f src/Mod/Path/libarea/CMakeFiles/area-native.dir/build.make src/Mod/Path/libarea/CMakeFiles/area-native.dir/depend cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDressupDogbone.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDressupDogbone.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea/CMakeFiles/area-native.dir/DependInfo.cmake --color= [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDressupDragknife.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDressupDragknife.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDressupDragknife.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDressupDragknife.py Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea/CMakeFiles/area-native.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea/CMakeFiles/area-native.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea/CMakeFiles/area-native.dir/depend.internal". Scanning dependencies of target area-native [ 23%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshElementIDFactory.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshElementIDFactory.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshElementIDFactory.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Path/libarea/CMakeFiles/area-native.dir/build.make src/Mod/Path/libarea/CMakeFiles/area-native.dir/build [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDressupHoldingTags.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDressupHoldingTags.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDressupHoldingTags.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDressupHoldingTags.py [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathStock.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathStock.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathStock.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathStock.py [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDressupLeadInOut.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDressupLeadInOut.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDressupLeadInOut.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDressupLeadInOut.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathTool.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathTool.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathTool.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathTool.py [ 23%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/Arc.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea && /usr/bin/c++ -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -Darea_native_EXPORTS -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -fPIC -DNDEBUG -fPIC -pthread -o CMakeFiles/area-native.dir/Arc.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp [ 23%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshFace.cpp.o [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDressupRampEntry.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDressupRampEntry.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDressupRampEntry.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDressupRampEntry.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshFace.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshFace.cpp [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathToolController.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathToolController.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathToolController.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathToolController.py [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDressupTag.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDressupTag.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDressupTag.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDressupTag.py [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathTooltable.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathTooltable.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathTooltable.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathTooltable.py [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDressupTagGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDressupTagGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDressupTagGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDressupTagGui.py [ 23%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathUtil.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathUtil.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/TestPathUtil.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/TestPathUtil.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDressupTagPreferences.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDressupTagPreferences.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDressupTagPreferences.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDressupTagPreferences.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDrilling.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDrilling.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDrilling.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDrilling.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/__init__.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDrillingGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDrillingGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathDrillingGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathDrillingGui.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathEngrave.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathEngrave.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathEngrave.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathEngrave.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathEngraveBase.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathEngraveBase.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathEngraveBase.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathEngraveBase.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/boxtest.fcstd to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/boxtest.fcstd cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/boxtest.fcstd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/boxtest.fcstd [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathEngraveGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathEngraveGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathEngraveGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathEngraveGui.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/test_centroid_00.ngc to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/test_centroid_00.ngc cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/test_centroid_00.ngc /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/test_centroid_00.ngc [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathFixture.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathFixture.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathFixture.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathFixture.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathGeom.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathGeom.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/test_geomop.fcstd to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/test_geomop.fcstd cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/test_geomop.fcstd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/test_geomop.fcstd cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathGeom.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathGeom.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/test_linuxcnc_00.ngc to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/test_linuxcnc_00.ngc cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathTests/test_linuxcnc_00.ngc /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathTests/test_linuxcnc_00.ngc [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/TestPathApp.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/TestPathApp.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/TestPathApp.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/TestPathApp.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathGetPoint.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathGetPoint.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathGetPoint.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathGetPoint.py [ 24%] Built target PathTests /usr/bin/gmake -f src/Mod/Show/CMakeFiles/Show.dir/build.make src/Mod/Show/CMakeFiles/Show.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Show /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Show /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Show/CMakeFiles/Show.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Show/CMakeFiles/Show.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Show/CMakeFiles/Show.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Show/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Show/CMakeFiles/Show.dir/depend.internal". Scanning dependencies of target Show gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Show/CMakeFiles/Show.dir/build.make src/Mod/Show/CMakeFiles/Show.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathGui.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Show/Containers.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Show/Containers.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Show && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Show/Containers.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Show/Containers.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathGuiInit.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathGuiInit.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathGuiInit.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathGuiInit.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Show/DepGraphTools.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Show/DepGraphTools.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Show && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Show/DepGraphTools.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Show/DepGraphTools.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathHelix.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathHelix.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathHelix.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathHelix.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Show/FrozenClass.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Show/FrozenClass.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Show && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Show/FrozenClass.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Show/FrozenClass.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathHelixGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathHelixGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathHelixGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathHelixGui.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Show/TempoVis.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Show/TempoVis.py In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, double, double, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:441:83: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 441 | inline CLine(const Point& p0, double dx, double dy, bool normalise = true){ p = p0; v = Vector2d(dx, dy); if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Vector2d&, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:442:81: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 442 | inline CLine(const Point& p0, const Vector2d& v0, bool normalise = true) {p = p0; v = v0; if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathHop.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathHop.py In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::CLine&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:443:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 443 | inline CLine( const CLine& s ) {p = s.p; v = s.v;}; // copy constructor CLine s1(s2); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:444:55: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 444 | inline CLine(const Point& p0, const Point& p1) {p = p0; v = Vector2d(p0, p1); Normalise();}; | ^~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Show && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Show/TempoVis.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Show/TempoVis.py In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathHop.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathHop.py In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:37: warning: implicitly-declared 'constexpr geoff_geometry::Circle& geoff_geometry::Circle::operator=(const geoff_geometry::Circle&)' is deprecated [-Wdeprecated-copy] 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:3: note: because 'geoff_geometry::Circle' has user-provided 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)' 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box::Box(geoff_geometry::Point&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:53: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box3d::Box3d(const geoff_geometry::Point3d&, const geoff_geometry::Point3d&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:59: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:71: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Span::Span(int, const geoff_geometry::Point&, const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:93: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:102: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:111: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In member function 'int geoff_geometry::Kurve::Get(int, geoff_geometry::Point3d&, geoff_geometry::Point3d&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:68: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:78: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathIconViewProvider.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathIconViewProvider.py In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h: In member function 'void Point::Transform(const geoff_geometry::Matrix&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:69:20: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 69 | p = p.Transform(m); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Arc.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathIconViewProvider.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathIconViewProvider.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Show/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Show/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Show && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Show/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Show/__init__.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 24%] Built target Show /usr/bin/gmake -f src/Mod/TechDraw/CMakeFiles/TDTestTarget.dir/build.make src/Mod/TechDraw/CMakeFiles/TDTestTarget.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/CMakeFiles/TDTestTarget.dir/DependInfo.cmake --color= [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathInspect.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathInspect.py Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/CMakeFiles/TDTestTarget.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/CMakeFiles/TDTestTarget.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/CMakeFiles/TDTestTarget.dir/depend.internal". cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathInspect.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathInspect.py Scanning dependencies of target TDTestTarget gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/TechDraw/CMakeFiles/TDTestTarget.dir/build.make src/Mod/TechDraw/CMakeFiles/TDTestTarget.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathJob.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathJob.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathJob.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathJob.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/DHatchTest.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/DHatchTest.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/DHatchTest.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/DHatchTest.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/DProjGroupTest.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/DProjGroupTest.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathJobCmd.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathJobCmd.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathJobCmd.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathJobCmd.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/DProjGroupTest.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/DProjGroupTest.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/DVAnnoSymImageTest.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/DVAnnoSymImageTest.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/DVAnnoSymImageTest.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/DVAnnoSymImageTest.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathJobDlg.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathJobDlg.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/DVDimensionTest.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/DVDimensionTest.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/DVDimensionTest.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/DVDimensionTest.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathJobDlg.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathJobDlg.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathJobGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathJobGui.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/DVPartTest.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/DVPartTest.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/DVPartTest.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/DVPartTest.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathJobGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathJobGui.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathLog.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathLog.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathLog.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathLog.py [ 24%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshGroup.cpp.o [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/DVSectionTest.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/DVSectionTest.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/DVSectionTest.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/DVSectionTest.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshGroup.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshGroup.cpp [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathMillFace.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathMillFace.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathMillFace.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathMillFace.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/TestHatch.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/TestHatch.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/TestHatch.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/TestHatch.svg [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/TestImage.png to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/TestImage.png cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/TestImage.png /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/TestImage.png [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathMillFaceGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathMillFaceGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathMillFaceGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathMillFaceGui.py [ 24%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/Area.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea && /usr/bin/c++ -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -Darea_native_EXPORTS -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -fPIC -DNDEBUG -fPIC -pthread -o CMakeFiles/area-native.dir/Area.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathOp.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathOp.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/TestSymbol.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/TestSymbol.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathOp.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathOp.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/TestSymbol.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/TestSymbol.svg [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/TestTemplate.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/TestTemplate.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/TestTemplate.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/TestTemplate.svg [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathOpGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathOpGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathOpGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathOpGui.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TDTest/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TDTest/__init__.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathOpTools.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathOpTools.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathOpTools.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathOpTools.py [ 24%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshIDFactory.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshIDFactory.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshIDFactory.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 24%] Built target TDTestTarget [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPocket.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPocket.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPocket.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPocket.py [ 24%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshNode.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshNode.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshNode.cpp [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPocketBase.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPocketBase.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPocketBase.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPocketBase.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPocketBaseGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPocketBaseGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPocketBaseGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPocketBaseGui.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPocketGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPocketGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPocketGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPocketGui.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPocketShape.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPocketShape.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPocketShape.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPocketShape.py [ 24%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPocketShapeGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPocketShapeGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPocketShapeGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPocketShapeGui.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPost.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPost.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPost.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPost.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPostProcessor.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPostProcessor.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPostProcessor.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPostProcessor.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPreferences.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPreferences.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPreferences.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPreferences.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPreferencesPathDressup.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPreferencesPathDressup.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPreferencesPathDressup.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPreferencesPathDressup.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPreferencesPathJob.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPreferencesPathJob.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathPreferencesPathJob.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathPreferencesPathJob.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathProfileBase.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathProfileBase.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathProfileBase.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathProfileBase.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathProfileBaseGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathProfileBaseGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathProfileBaseGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathProfileBaseGui.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathProfileContour.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathProfileContour.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathProfileContour.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathProfileContour.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathProfileContourGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathProfileContourGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathProfileContourGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathProfileContourGui.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathProfileEdges.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathProfileEdges.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathProfileEdgesGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathProfileEdgesGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathProfileEdgesGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathProfileEdgesGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathProfileEdges.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathProfileEdges.py [ 25%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshNodeIDFactory.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshNodeIDFactory.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshNodeIDFactory.cpp [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathProfileFaces.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathProfileFaces.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathProfileFaces.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathProfileFaces.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathProfileFacesGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathProfileFacesGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathProfileFacesGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathProfileFacesGui.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathSanity.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathSanity.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathSanity.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathSanity.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathSelection.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathSelection.py In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, double, double, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:441:83: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 441 | inline CLine(const Point& p0, double dx, double dy, bool normalise = true){ p = p0; v = Vector2d(dx, dy); if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Vector2d&, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:442:81: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 442 | inline CLine(const Point& p0, const Vector2d& v0, bool normalise = true) {p = p0; v = v0; if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::CLine&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:443:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 443 | inline CLine( const CLine& s ) {p = s.p; v = s.v;}; // copy constructor CLine s1(s2); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathSelection.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathSelection.py In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:444:55: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 444 | inline CLine(const Point& p0, const Point& p1) {p = p0; v = Vector2d(p0, p1); Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:37: warning: implicitly-declared 'constexpr geoff_geometry::Circle& geoff_geometry::Circle::operator=(const geoff_geometry::Circle&)' is deprecated [-Wdeprecated-copy] 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:3: note: because 'geoff_geometry::Circle' has user-provided 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)' 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box::Box(geoff_geometry::Point&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:53: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box3d::Box3d(const geoff_geometry::Point3d&, const geoff_geometry::Point3d&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:59: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:71: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Span::Span(int, const geoff_geometry::Point&, const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:93: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:102: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:111: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathSetupSheet.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathSetupSheet.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathSetupSheet.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathSetupSheet.py In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In member function 'int geoff_geometry::Kurve::Get(int, geoff_geometry::Point3d&, geoff_geometry::Point3d&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:68: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:78: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h: In member function 'void Point::Transform(const geoff_geometry::Matrix&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:69:20: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 69 | p = p.Transform(m); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathSetupSheetGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathSetupSheetGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathSetupSheetGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathSetupSheetGui.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathSetupSheetOpPrototype.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathSetupSheetOpPrototype.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathSetupSheetOpPrototype.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathSetupSheetOpPrototype.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathSetupSheetOpPrototypeGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathSetupSheetOpPrototypeGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathSetupSheetOpPrototypeGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathSetupSheetOpPrototypeGui.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathSimpleCopy.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathSimpleCopy.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathSimpleCopy.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathSimpleCopy.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathSimulatorGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathSimulatorGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathSimulatorGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathSimulatorGui.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathStock.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathStock.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathStock.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathStock.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathStop.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathStop.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathStop.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathStop.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathSurface.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathSurface.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathSurface.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathSurface.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathSurfaceGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathSurfaceGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathSurfaceGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathSurfaceGui.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathToolController.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathToolController.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathToolController.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathToolController.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathToolEdit.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathToolEdit.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathToolEdit.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathToolEdit.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathToolLibraryManager.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathToolLibraryManager.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathToolLibraryManager.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathToolLibraryManager.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathUtil.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathUtil.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathUtil.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathUtil.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathUtils.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathUtils.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PathUtils.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PathUtils.py [ 25%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PostUtils.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PostUtils.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/PostUtils.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/PostUtils.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/__init__.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/__init__.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/centroid_post.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/centroid_post.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/centroid_post.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/centroid_post.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/comparams_post.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/comparams_post.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/comparams_post.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/comparams_post.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/dynapath_post.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/dynapath_post.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/dynapath_post.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/dynapath_post.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/example_pre.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/example_pre.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/example_pre.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/example_pre.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/grbl_G81_post.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/grbl_G81_post.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/grbl_G81_post.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/grbl_G81_post.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/grbl_post.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/grbl_post.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/grbl_post.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/grbl_post.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/linuxcnc_post.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/linuxcnc_post.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/linuxcnc_post.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/linuxcnc_post.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/opensbp_post.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/opensbp_post.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/opensbp_post.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/opensbp_post.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/opensbp_pre.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/opensbp_pre.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/opensbp_pre.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/opensbp_pre.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/philips_post.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/philips_post.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/philips_post.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/philips_post.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/rml_post.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/rml_post.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/rml_post.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/rml_post.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/slic3r_pre.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/slic3r_pre.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/slic3r_pre.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/slic3r_pre.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/smoothie_post.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/smoothie_post.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathScripts/post/smoothie_post.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path/PathScripts/post/smoothie_post.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 26%] Built target PathScripts /usr/bin/gmake -f src/Mod/TechDraw/CMakeFiles/TechDraw_Data.dir/build.make src/Mod/TechDraw/CMakeFiles/TechDraw_Data.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/CMakeFiles/TechDraw_Data.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/CMakeFiles/TechDraw_Data.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/CMakeFiles/TechDraw_Data.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/CMakeFiles/TechDraw_Data.dir/depend.internal". Scanning dependencies of target TechDraw_Data gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/TechDraw/CMakeFiles/TechDraw_Data.dir/build.make src/Mod/TechDraw/CMakeFiles/TechDraw_Data.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/Init.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/InitGui.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TestTechDrawApp.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TestTechDrawApp.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/TestTechDrawApp.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw/TestTechDrawApp.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/LineGroup/LineGroup.csv to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/TechDraw/LineGroup/LineGroup.csv cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/LineGroup/LineGroup.csv /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/TechDraw/LineGroup/LineGroup.csv [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/PAT/FCPAT.pat to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/TechDraw/PAT/FCPAT.pat cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/PAT/FCPAT.pat /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/TechDraw/PAT/FCPAT.pat gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 26%] Built target TechDraw_Data /usr/bin/gmake -f src/Mod/AddonManager/CMakeFiles/AddonManager.dir/build.make src/Mod/AddonManager/CMakeFiles/AddonManager.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/AddonManager /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/AddonManager /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/AddonManager/CMakeFiles/AddonManager.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/AddonManager/CMakeFiles/AddonManager.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/AddonManager/CMakeFiles/AddonManager.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/AddonManager/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/AddonManager/CMakeFiles/AddonManager.dir/depend.internal". Scanning dependencies of target AddonManager gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/AddonManager/CMakeFiles/AddonManager.dir/build.make src/Mod/AddonManager/CMakeFiles/AddonManager.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 26%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshObject.cpp [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/AddonManager/AddonManager.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/AddonManager/AddonManager.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/AddonManager && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/AddonManager/AddonManager.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/AddonManager/AddonManager.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/AddonManager/AddonManagerGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/AddonManager/AddonManagerGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/AddonManager && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/AddonManager/AddonManagerGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/AddonManager/AddonManagerGui.py [ 26%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/AreaDxf.cpp.o [ 26%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshVolume.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea && /usr/bin/c++ -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -Darea_native_EXPORTS -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -fPIC -DNDEBUG -fPIC -pthread -o CMakeFiles/area-native.dir/AreaDxf.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshVolume.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_MeshVolume.cpp [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/AddonManager/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/AddonManager/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/AddonManager && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/AddonManager/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/AddonManager/Init.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/AddonManager/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/AddonManager/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/AddonManager && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/AddonManager/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/AddonManager/InitGui.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/AddonManager/addonmanager_macro.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/AddonManager/addonmanager_macro.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/AddonManager && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/AddonManager/addonmanager_macro.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/AddonManager/addonmanager_macro.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/AddonManager/addonmanager_utilities.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/AddonManager/addonmanager_utilities.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/AddonManager && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/AddonManager/addonmanager_utilities.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/AddonManager/addonmanager_utilities.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 26%] Built target AddonManager /usr/bin/gmake -f src/Mod/Tux/CMakeFiles/Tux.dir/build.make src/Mod/Tux/CMakeFiles/Tux.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Tux /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Tux /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Tux/CMakeFiles/Tux.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Tux/CMakeFiles/Tux.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Tux/CMakeFiles/Tux.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Tux/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Tux/CMakeFiles/Tux.dir/depend.internal". Scanning dependencies of target Tux gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Tux/CMakeFiles/Tux.dir/build.make src/Mod/Tux/CMakeFiles/Tux.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Tux/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Tux/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Tux && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Tux/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Tux/InitGui.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Tux/NavigationIndicatorGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Tux/NavigationIndicatorGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Tux && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Tux/NavigationIndicatorGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Tux/NavigationIndicatorGui.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Tux/PersistentToolbars.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Tux/PersistentToolbars.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Tux && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Tux/PersistentToolbars.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Tux/PersistentToolbars.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Tux/PersistentToolbarsGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Tux/PersistentToolbarsGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Tux && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Tux/PersistentToolbarsGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Tux/PersistentToolbarsGui.py [ 26%] Generating Tux_rc.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Tux && /usr/bin/rcc-qt5 --generator=python --compress-algo=zlib --compress=1 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Tux/Resources/Tux.qrc -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Tux/Tux_rc.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Tux && sed -i /^#\ /d /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Tux/Tux_rc.py [ 26%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Tux/Tux_rc.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Tux/Tux_rc.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Tux && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Tux/Tux_rc.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Tux/Tux_rc.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 26%] Built target Tux /usr/bin/gmake -f src/Ext/freecad/CMakeFiles/freecad_COPY_SOURCE.dir/build.make src/Ext/freecad/CMakeFiles/freecad_COPY_SOURCE.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Ext/freecad /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Ext/freecad /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Ext/freecad/CMakeFiles/freecad_COPY_SOURCE.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Ext/freecad/CMakeFiles/freecad_COPY_SOURCE.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Ext/freecad/CMakeFiles/freecad_COPY_SOURCE.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Ext/freecad/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Ext/freecad/CMakeFiles/freecad_COPY_SOURCE.dir/depend.internal". Scanning dependencies of target freecad_COPY_SOURCE gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Ext/freecad/CMakeFiles/freecad_COPY_SOURCE.dir/build.make src/Ext/freecad/CMakeFiles/freecad_COPY_SOURCE.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 27%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Ext/freecad/__init__.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Ext/freecad/__init__.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Ext/freecad && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Ext/freecad/__init__.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Ext/freecad/__init__.py gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 27%] Built target freecad_COPY_SOURCE /usr/bin/gmake -f src/Gui/Stylesheets/CMakeFiles/Stylesheets_data.dir/build.make src/Gui/Stylesheets/CMakeFiles/Stylesheets_data.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets/CMakeFiles/Stylesheets_data.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets/CMakeFiles/Stylesheets_data.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets/CMakeFiles/Stylesheets_data.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets/CMakeFiles/Stylesheets_data.dir/depend.internal". Scanning dependencies of target Stylesheets_data gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Gui/Stylesheets/CMakeFiles/Stylesheets_data.dir/build.make src/Gui/Stylesheets/CMakeFiles/Stylesheets_data.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 27%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/Dark-blue.qss to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/Dark-blue.qss cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/Dark-blue.qss /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/Dark-blue.qss [ 27%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/Dark-green.qss to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/Dark-green.qss cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/Dark-green.qss /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/Dark-green.qss [ 27%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/Dark-orange.qss to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/Dark-orange.qss cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/Dark-orange.qss /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/Dark-orange.qss [ 27%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/Light-blue.qss to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/Light-blue.qss cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/Light-blue.qss /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/Light-blue.qss [ 27%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/Light-green.qss to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/Light-green.qss cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/Light-green.qss /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/Light-green.qss [ 27%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/Light-orange.qss to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/Light-orange.qss cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/Light-orange.qss /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/Light-orange.qss [ 27%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/Hmovetoolbar_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/Hmovetoolbar_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/Hmovetoolbar_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/Hmovetoolbar_dark.svg [ 27%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/Hmovetoolbar_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/Hmovetoolbar_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/Hmovetoolbar_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/Hmovetoolbar_light.svg [ 27%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/Hsepartoolbar_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/Hsepartoolbar_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/Hsepartoolbar_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/Hsepartoolbar_dark.svg [ 27%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/Hsepartoolbar_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/Hsepartoolbar_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/Hsepartoolbar_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/Hsepartoolbar_light.svg [ 27%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/Vmovetoolbar_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/Vmovetoolbar_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/Vmovetoolbar_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/Vmovetoolbar_light.svg [ 27%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/Vsepartoolbar_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/Vsepartoolbar_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/Vsepartoolbar_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/Vsepartoolbar_dark.svg [ 27%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/Vsepartoolbar_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/Vsepartoolbar_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/Vsepartoolbar_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/Vsepartoolbar_light.svg [ 27%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/background_freecad.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/background_freecad.svg [ 27%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_PolygonalFaceOfNodes.cpp.o [ 27%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_end_closed_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_end_closed_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_end_closed_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_end_closed_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_PolygonalFaceOfNodes.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_PolygonalFaceOfNodes.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/background_freecad.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/background_freecad.svg [ 27%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_PolyhedralVolumeOfNodes.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_PolyhedralVolumeOfNodes.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_PolyhedralVolumeOfNodes.cpp [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_end_closed_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_end_closed_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_end_closed_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_end_closed_light.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_end_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_end_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_end_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_end_dark.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_end_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_end_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_end_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_end_light.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_end_open_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_end_open_dark.svg In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, double, double, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:441:83: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 441 | inline CLine(const Point& p0, double dx, double dy, bool normalise = true){ p = p0; v = Vector2d(dx, dy); if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_end_open_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_end_open_dark.svg In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Vector2d&, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:442:81: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 442 | inline CLine(const Point& p0, const Vector2d& v0, bool normalise = true) {p = p0; v = v0; if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::CLine&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:443:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 443 | inline CLine( const CLine& s ) {p = s.p; v = s.v;}; // copy constructor CLine s1(s2); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:444:55: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 444 | inline CLine(const Point& p0, const Point& p1) {p = p0; v = Vector2d(p0, p1); Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:37: warning: implicitly-declared 'constexpr geoff_geometry::Circle& geoff_geometry::Circle::operator=(const geoff_geometry::Circle&)' is deprecated [-Wdeprecated-copy] 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:3: note: because 'geoff_geometry::Circle' has user-provided 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)' 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box::Box(geoff_geometry::Point&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:53: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box3d::Box3d(const geoff_geometry::Point3d&, const geoff_geometry::Point3d&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:59: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:71: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Span::Span(int, const geoff_geometry::Point&, const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:93: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:102: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:111: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_end_open_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_end_open_light.svg In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In member function 'int geoff_geometry::Kurve::Get(int, geoff_geometry::Point3d&, geoff_geometry::Point3d&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:68: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:78: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h: In member function 'void Point::Transform(const geoff_geometry::Matrix&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:69:20: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 69 | p = p.Transform(m); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaDxf.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_end_open_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_end_open_light.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_more_closed_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_more_closed_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_more_closed_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_more_closed_dark.svg [ 28%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Console.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Console.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Console.cpp [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_more_closed_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_more_closed_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_more_closed_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_more_closed_light.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_more_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_more_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_more_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_more_dark.svg [ 28%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/CoordinateSystem.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/CoordinateSystem.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/CoordinateSystem.cpp [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_more_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_more_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_more_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_more_light.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_more_open_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_more_open_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_more_open_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_more_open_dark.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_more_open_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_more_open_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_more_open_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_more_open_light.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_vline_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_vline_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_vline_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_vline_dark.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_vline_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_vline_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/branch_vline_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/branch_vline_light.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/checkbox_indeterminate_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/checkbox_indeterminate_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/checkbox_indeterminate_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/checkbox_indeterminate_light.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/checkbox_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/checkbox_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/checkbox_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/checkbox_light.svg [ 28%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/AreaOrderer.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea && /usr/bin/c++ -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -Darea_native_EXPORTS -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -fPIC -DNDEBUG -fPIC -pthread -o CMakeFiles/area-native.dir/AreaOrderer.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/close_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/close_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/close_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/close_dark.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/close_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/close_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/close_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/close_light.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/down_arrow_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/down_arrow_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/down_arrow_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/down_arrow_dark.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/down_arrow_darker.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/down_arrow_darker.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/down_arrow_darker.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/down_arrow_darker.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/down_arrow_disabled_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/down_arrow_disabled_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/down_arrow_disabled_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/down_arrow_disabled_dark.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/down_arrow_disabled_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/down_arrow_disabled_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/down_arrow_disabled_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/down_arrow_disabled_light.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/down_arrow_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/down_arrow_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/down_arrow_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/down_arrow_light.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/down_arrow_lighter.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/down_arrow_lighter.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/down_arrow_lighter.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/down_arrow_lighter.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/left_arrow_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/left_arrow_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/left_arrow_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/left_arrow_dark.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/left_arrow_darker.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/left_arrow_darker.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/left_arrow_darker.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/left_arrow_darker.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/left_arrow_disabled_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/left_arrow_disabled_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/left_arrow_disabled_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/left_arrow_disabled_dark.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/left_arrow_disabled_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/left_arrow_disabled_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/left_arrow_disabled_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/left_arrow_disabled_light.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/left_arrow_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/left_arrow_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/left_arrow_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/left_arrow_light.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/left_arrow_lighter.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/left_arrow_lighter.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/left_arrow_lighter.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/left_arrow_lighter.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/more_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/more_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/more_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/more_dark.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/more_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/more_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/more_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/more_light.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/radiobutton_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/radiobutton_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/radiobutton_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/radiobutton_light.svg [ 28%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/right_arrow_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/right_arrow_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/right_arrow_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/right_arrow_dark.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/right_arrow_darker.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/right_arrow_darker.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/right_arrow_darker.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/right_arrow_darker.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/right_arrow_disabled_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/right_arrow_disabled_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/right_arrow_disabled_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/right_arrow_disabled_dark.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/right_arrow_disabled_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/right_arrow_disabled_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/right_arrow_disabled_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/right_arrow_disabled_light.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/right_arrow_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/right_arrow_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/right_arrow_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/right_arrow_light.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/right_arrow_lighter.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/right_arrow_lighter.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/right_arrow_lighter.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/right_arrow_lighter.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/sizegrip_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/sizegrip_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/sizegrip_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/sizegrip_dark.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/sizegrip_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/sizegrip_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/sizegrip_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/sizegrip_light.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/splitter_horizontal_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/splitter_horizontal_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/splitter_horizontal_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/splitter_horizontal_dark.svg [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_Position.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_Position.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_Position.cpp [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/splitter_horizontal_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/splitter_horizontal_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/splitter_horizontal_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/splitter_horizontal_light.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/splitter_vertical_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/splitter_vertical_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/splitter_vertical_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/splitter_vertical_dark.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/splitter_vertical_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/splitter_vertical_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/splitter_vertical_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/splitter_vertical_light.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/transparent.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/transparent.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/transparent.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/transparent.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/undock_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/undock_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/undock_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/undock_dark.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/undock_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/undock_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/undock_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/undock_light.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up-down_arrow_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up-down_arrow_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up-down_arrow_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up-down_arrow_dark.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up-down_arrow_darker.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up-down_arrow_darker.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up-down_arrow_darker.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up-down_arrow_darker.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up-down_arrow_disabled_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up-down_arrow_disabled_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up-down_arrow_disabled_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up-down_arrow_disabled_dark.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up-down_arrow_disabled_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up-down_arrow_disabled_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up-down_arrow_disabled_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up-down_arrow_disabled_light.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up-down_arrow_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up-down_arrow_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up-down_arrow_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up-down_arrow_light.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up-down_arrow_lighter.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up-down_arrow_lighter.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up-down_arrow_lighter.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up-down_arrow_lighter.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up_arrow_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up_arrow_dark.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up_arrow_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up_arrow_dark.svg In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, double, double, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:441:83: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 441 | inline CLine(const Point& p0, double dx, double dy, bool normalise = true){ p = p0; v = Vector2d(dx, dy); if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Vector2d&, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:442:81: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 442 | inline CLine(const Point& p0, const Vector2d& v0, bool normalise = true) {p = p0; v = v0; if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::CLine&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:443:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 443 | inline CLine( const CLine& s ) {p = s.p; v = s.v;}; // copy constructor CLine s1(s2); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:444:55: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 444 | inline CLine(const Point& p0, const Point& p1) {p = p0; v = Vector2d(p0, p1); Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:37: warning: implicitly-declared 'constexpr geoff_geometry::Circle& geoff_geometry::Circle::operator=(const geoff_geometry::Circle&)' is deprecated [-Wdeprecated-copy] 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:3: note: because 'geoff_geometry::Circle' has user-provided 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)' 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box::Box(geoff_geometry::Point&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:53: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box3d::Box3d(const geoff_geometry::Point3d&, const geoff_geometry::Point3d&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:59: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:71: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up_arrow_darker.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up_arrow_darker.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up_arrow_darker.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up_arrow_darker.svg In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Span::Span(int, const geoff_geometry::Point&, const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:93: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:102: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:111: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In member function 'int geoff_geometry::Kurve::Get(int, geoff_geometry::Point3d&, geoff_geometry::Point3d&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:68: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:78: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up_arrow_disabled_dark.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up_arrow_disabled_dark.svg In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h: In member function 'void Point::Transform(const geoff_geometry::Matrix&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:69:20: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 69 | p = p.Transform(m); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaOrderer.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up_arrow_disabled_dark.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up_arrow_disabled_dark.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up_arrow_disabled_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up_arrow_disabled_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up_arrow_disabled_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up_arrow_disabled_light.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up_arrow_light.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up_arrow_light.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up_arrow_light.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up_arrow_light.svg [ 29%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up_arrow_lighter.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up_arrow_lighter.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Stylesheets && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Stylesheets/images_dark-light/up_arrow_lighter.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/data/Gui/Stylesheets/images_dark-light/up_arrow_lighter.svg [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticEdge.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticEdge.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_QuadraticEdge.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 29%] Built target Stylesheets_data [ 29%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/AreaPocket.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea && /usr/bin/c++ -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -Darea_native_EXPORTS -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -fPIC -DNDEBUG -fPIC -pthread -o CMakeFiles/area-native.dir/AreaPocket.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp [ 29%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/Circle.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea && /usr/bin/c++ -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -Darea_native_EXPORTS -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -fPIC -DNDEBUG -fPIC -pthread -o CMakeFiles/area-native.dir/Circle.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticFaceOfNodes.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticFaceOfNodes.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_QuadraticFaceOfNodes.cpp [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticVolumeOfNodes.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticVolumeOfNodes.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_QuadraticVolumeOfNodes.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, double, double, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:441:83: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 441 | inline CLine(const Point& p0, double dx, double dy, bool normalise = true){ p = p0; v = Vector2d(dx, dy); if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Vector2d&, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:442:81: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 442 | inline CLine(const Point& p0, const Vector2d& v0, bool normalise = true) {p = p0; v = v0; if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::CLine&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:443:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 443 | inline CLine( const CLine& s ) {p = s.p; v = s.v;}; // copy constructor CLine s1(s2); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:444:55: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 444 | inline CLine(const Point& p0, const Point& p1) {p = p0; v = Vector2d(p0, p1); Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:37: warning: implicitly-declared 'constexpr geoff_geometry::Circle& geoff_geometry::Circle::operator=(const geoff_geometry::Circle&)' is deprecated [-Wdeprecated-copy] 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:3: note: because 'geoff_geometry::Circle' has user-provided 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)' 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box::Box(geoff_geometry::Point&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:53: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box3d::Box3d(const geoff_geometry::Point3d&, const geoff_geometry::Point3d&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:59: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:71: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Span::Span(int, const geoff_geometry::Point&, const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:93: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:102: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:111: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In member function 'int geoff_geometry::Kurve::Get(int, geoff_geometry::Point3d&, geoff_geometry::Point3d&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:68: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:78: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h: In member function 'void Point::Transform(const geoff_geometry::Matrix&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:69:20: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 69 | p = p.Transform(m); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaPocket.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, double, double, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:441:83: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 441 | inline CLine(const Point& p0, double dx, double dy, bool normalise = true){ p = p0; v = Vector2d(dx, dy); if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Vector2d&, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:442:81: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 442 | inline CLine(const Point& p0, const Vector2d& v0, bool normalise = true) {p = p0; v = v0; if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::CLine&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:443:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 443 | inline CLine( const CLine& s ) {p = s.p; v = s.v;}; // copy constructor CLine s1(s2); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:444:55: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 444 | inline CLine(const Point& p0, const Point& p1) {p = p0; v = Vector2d(p0, p1); Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:37: warning: implicitly-declared 'constexpr geoff_geometry::Circle& geoff_geometry::Circle::operator=(const geoff_geometry::Circle&)' is deprecated [-Wdeprecated-copy] 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:3: note: because 'geoff_geometry::Circle' has user-provided 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)' 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box::Box(geoff_geometry::Point&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:53: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box3d::Box3d(const geoff_geometry::Point3d&, const geoff_geometry::Point3d&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:59: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:71: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Span::Span(int, const geoff_geometry::Point&, const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:93: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:102: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:111: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In member function 'int geoff_geometry::Kurve::Get(int, geoff_geometry::Point3d&, geoff_geometry::Point3d&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:68: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:78: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h: In member function 'void Point::Transform(const geoff_geometry::Matrix&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:69:20: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 69 | p = p.Transform(m); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Circle.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ [ 29%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/Curve.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea && /usr/bin/c++ -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -Darea_native_EXPORTS -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -fPIC -DNDEBUG -fPIC -pthread -o CMakeFiles/area-native.dir/Curve.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_SpacePosition.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_SpacePosition.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_SpacePosition.cpp [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_UnstructuredGrid.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_UnstructuredGrid.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_UnstructuredGrid.cpp [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VertexPosition.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VertexPosition.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VertexPosition.cpp [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeOfFaces.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeOfFaces.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeOfFaces.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, double, double, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:441:83: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 441 | inline CLine(const Point& p0, double dx, double dy, bool normalise = true){ p = p0; v = Vector2d(dx, dy); if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Vector2d&, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:442:81: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 442 | inline CLine(const Point& p0, const Vector2d& v0, bool normalise = true) {p = p0; v = v0; if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::CLine&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:443:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 443 | inline CLine( const CLine& s ) {p = s.p; v = s.v;}; // copy constructor CLine s1(s2); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:444:55: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 444 | inline CLine(const Point& p0, const Point& p1) {p = p0; v = Vector2d(p0, p1); Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:37: warning: implicitly-declared 'constexpr geoff_geometry::Circle& geoff_geometry::Circle::operator=(const geoff_geometry::Circle&)' is deprecated [-Wdeprecated-copy] 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:3: note: because 'geoff_geometry::Circle' has user-provided 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)' 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box::Box(geoff_geometry::Point&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:53: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box3d::Box3d(const geoff_geometry::Point3d&, const geoff_geometry::Point3d&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:59: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:71: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Span::Span(int, const geoff_geometry::Point&, const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:93: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:102: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:111: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In member function 'int geoff_geometry::Kurve::Get(int, geoff_geometry::Point3d&, geoff_geometry::Point3d&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:68: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:78: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h: In member function 'void Point::Transform(const geoff_geometry::Matrix&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:69:20: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 69 | p = p.Transform(m); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeOfNodes.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeOfNodes.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeOfNodes.cpp [ 29%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/CoordinateSystemPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/CoordinateSystemPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/CoordinateSystemPyImp.cpp [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeTool.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeTool.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeTool.cpp [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkCellIterator.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkCellIterator.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkCellIterator.cpp [ 29%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/dxf.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea && /usr/bin/c++ -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -Darea_native_EXPORTS -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -fPIC -DNDEBUG -fPIC -pthread -o CMakeFiles/area-native.dir/dxf.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/dxf.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeTool.cpp: In member function 'double SMDS_VolumeTool::GetSize() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeTool.cpp:710:38: warning: implicitly-declared 'constexpr {anonymous}::XYZ& {anonymous}::XYZ::operator=(const {anonymous}::XYZ&)' is deprecated [-Wdeprecated-copy] 710 | area = area + p1.Crossed( p2 ); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeTool.cpp:362:3: note: because '{anonymous}::XYZ' has user-provided '{anonymous}::XYZ::XYZ(const {anonymous}::XYZ&)' 362 | XYZ( const XYZ& other ) { x = other.x; y = other.y; z = other.z; } | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeTool.cpp:711:14: warning: implicitly-declared 'constexpr {anonymous}::XYZ& {anonymous}::XYZ::operator=(const {anonymous}::XYZ&)' is deprecated [-Wdeprecated-copy] 711 | p1 = p2; | ^~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeTool.cpp:362:3: note: because '{anonymous}::XYZ' has user-provided '{anonymous}::XYZ::XYZ(const {anonymous}::XYZ&)' 362 | XYZ( const XYZ& other ) { x = other.x; y = other.y; z = other.z; } | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeTool.cpp: In member function 'bool SMDS_VolumeTool::IsOut(double, double, double, double) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeTool.cpp:875:28: warning: implicitly-declared 'constexpr {anonymous}::XYZ& {anonymous}::XYZ::operator=(const {anonymous}::XYZ&)' is deprecated [-Wdeprecated-copy] 875 | faceNormal = XYZ() - faceNormal; // reverse | ^~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeTool.cpp:362:3: note: because '{anonymous}::XYZ' has user-provided '{anonymous}::XYZ::XYZ(const {anonymous}::XYZ&)' 362 | XYZ( const XYZ& other ) { x = other.x; y = other.y; z = other.z; } | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeTool.cpp: In member function 'bool SMDS_VolumeTool::GetFaceNormal(int, double&, double&, double&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeTool.cpp:1195:21: warning: implicitly-declared 'constexpr {anonymous}::XYZ& {anonymous}::XYZ::operator=(const {anonymous}::XYZ&)' is deprecated [-Wdeprecated-copy] 1195 | cross = cross + cross2; | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeTool.cpp:362:3: note: because '{anonymous}::XYZ' has user-provided '{anonymous}::XYZ::XYZ(const {anonymous}::XYZ&)' 362 | XYZ( const XYZ& other ) { x = other.x; y = other.y; z = other.z; } | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeTool.cpp: In member function 'double SMDS_VolumeTool::GetFaceArea(int) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeTool.cpp:1255:16: warning: implicitly-declared 'constexpr {anonymous}::XYZ& {anonymous}::XYZ::operator=(const {anonymous}::XYZ&)' is deprecated [-Wdeprecated-copy] 1255 | aVec13 = aVecI; | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeTool.cpp:362:3: note: because '{anonymous}::XYZ' has user-provided '{anonymous}::XYZ::XYZ(const {anonymous}::XYZ&)' 362 | XYZ( const XYZ& other ) { x = other.x; y = other.y; z = other.z; } | ^~~ [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkEdge.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkEdge.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkEdge.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeTool.cpp: In member function 'bool SMDS_VolumeTool::IsFreeFaceAdv(int, const SMDS_MeshElement**) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeTool.cpp:1782:63: warning: implicitly-declared 'constexpr {anonymous}::XYZ& {anonymous}::XYZ::operator=(const {anonymous}::XYZ&)' is deprecated [-Wdeprecated-copy] 1782 | intNormal = XYZ( -intNormal.x, -intNormal.y, -intNormal.z ); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VolumeTool.cpp:362:3: note: because '{anonymous}::XYZ' has user-provided '{anonymous}::XYZ::XYZ(const {anonymous}::XYZ&)' 362 | XYZ( const XYZ& other ) { x = other.x; y = other.y; z = other.z; } | ^~~ [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkFace.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkFace.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkFace.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/CoordinateSystemPyImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/CoordinateSystemPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/CoordinateSystemPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 29%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/kurve/Construction.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea && /usr/bin/c++ -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -Darea_native_EXPORTS -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -fPIC -DNDEBUG -fPIC -pthread -o CMakeFiles/area-native.dir/kurve/Construction.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp [ 29%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Debugger.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Debugger.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Debugger.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, double, double, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:441:83: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 441 | inline CLine(const Point& p0, double dx, double dy, bool normalise = true){ p = p0; v = Vector2d(dx, dy); if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Vector2d&, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:442:81: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 442 | inline CLine(const Point& p0, const Vector2d& v0, bool normalise = true) {p = p0; v = v0; if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::CLine&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:443:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 443 | inline CLine( const CLine& s ) {p = s.p; v = s.v;}; // copy constructor CLine s1(s2); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:444:55: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 444 | inline CLine(const Point& p0, const Point& p1) {p = p0; v = Vector2d(p0, p1); Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:37: warning: implicitly-declared 'constexpr geoff_geometry::Circle& geoff_geometry::Circle::operator=(const geoff_geometry::Circle&)' is deprecated [-Wdeprecated-copy] 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:3: note: because 'geoff_geometry::Circle' has user-provided 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)' 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box::Box(geoff_geometry::Point&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:53: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box3d::Box3d(const geoff_geometry::Point3d&, const geoff_geometry::Point3d&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:59: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:71: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Span::Span(int, const geoff_geometry::Point&, const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:93: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:102: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:111: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In member function 'int geoff_geometry::Kurve::Get(int, geoff_geometry::Point3d&, geoff_geometry::Point3d&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:68: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:78: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Span&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:244:10: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 244 | p = sp.p0; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp: In constructor 'geoff_geometry::Circle::Circle(const geoff_geometry::Point&, double)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:362:8: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 362 | pc = p; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp: In constructor 'geoff_geometry::Circle::Circle(const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:369:9: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 369 | pc = pc0; | ^~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp: In constructor 'geoff_geometry::Circle::Circle(const geoff_geometry::Span&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:378:11: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 378 | pc = sp.pc; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp: In function 'geoff_geometry::CLine geoff_geometry::Tanto(int, const geoff_geometry::Circle&, int, const geoff_geometry::Circle&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:436:27: warning: implicitly-declared 'geoff_geometry::CLine& geoff_geometry::CLine::operator=(const geoff_geometry::CLine&)' is deprecated [-Wdeprecated-copy] 436 | s = Tanto(AT1, c1, c0.pc); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:443:10: note: because 'geoff_geometry::CLine' has user-provided 'geoff_geometry::CLine::CLine(const geoff_geometry::CLine&)' 443 | inline CLine( const CLine& s ) {p = s.p; v = s.v;}; // copy constructor CLine s1(s2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In member function 'geoff_geometry::CLine& geoff_geometry::CLine::operator=(const geoff_geometry::CLine&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:432:8: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 432 | class CLine{ | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp: In function 'geoff_geometry::CLine geoff_geometry::Tanto(int, const geoff_geometry::Circle&, int, const geoff_geometry::Circle&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:436:27: note: synthesized method 'geoff_geometry::CLine& geoff_geometry::CLine::operator=(const geoff_geometry::CLine&)' first required here 436 | s = Tanto(AT1, c1, c0.pc); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp: In function 'geoff_geometry::Point geoff_geometry::Intof(int, const geoff_geometry::CLine&, const geoff_geometry::Circle&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:495:36: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 495 | otherInters = s.v * tOther + s.p; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp: In function 'geoff_geometry::Point geoff_geometry::Intof(int, const geoff_geometry::Circle&, const geoff_geometry::Circle&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:530:17: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 530 | otherInters = pLeft; | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:534:18: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 534 | otherInters = pRight; | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:537:18: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 537 | otherInters = pLeft; | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp: In function 'int geoff_geometry::Intof(const geoff_geometry::Circle&, const geoff_geometry::Circle&, geoff_geometry::Point&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:560:23: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 560 | pLeft = v * d0 + c0.pc; // mid-point of intersects | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:565:20: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 565 | pRight = v * h + pLeft; | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:567:19: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 567 | pLeft = v * h + pLeft; | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp: In function 'geoff_geometry::Circle geoff_geometry::Tanto(int, geoff_geometry::CLine, int, geoff_geometry::CLine, int, geoff_geometry::CLine)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:605:26: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 605 | p = Intof(Offs1, Offs3); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp: In member function 'bool geoff_geometry::Plane::Intof(const geoff_geometry::Line&, geoff_geometry::Point3d&, double&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:816:23: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 816 | intof = l.v * t + l.p0; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp: In member function 'bool geoff_geometry::Plane::Intof(const geoff_geometry::Plane&, geoff_geometry::Line&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:835:40: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 835 | intof.p0 = a * this->normal + b * pl.normal; | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Construction.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ [ 29%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Exception.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Exception.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Exception.cpp [ 29%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/kurve/Finite.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea && /usr/bin/c++ -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -Darea_native_EXPORTS -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -fPIC -DNDEBUG -fPIC -pthread -o CMakeFiles/area-native.dir/kurve/Finite.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp [ 29%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/ExceptionFactory.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/ExceptionFactory.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/ExceptionFactory.cpp [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkVolume.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkVolume.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/SMDS_VtkVolume.cpp [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/Utils_SALOME_Exception.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/Utils_SALOME_Exception.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/Utils_SALOME_Exception.cpp [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/chrono.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/chrono.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/chrono.cpp [ 29%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Factory.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Factory.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Factory.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, double, double, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:441:83: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 441 | inline CLine(const Point& p0, double dx, double dy, bool normalise = true){ p = p0; v = Vector2d(dx, dy); if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Vector2d&, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:442:81: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 442 | inline CLine(const Point& p0, const Vector2d& v0, bool normalise = true) {p = p0; v = v0; if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::CLine&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:443:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 443 | inline CLine( const CLine& s ) {p = s.p; v = s.v;}; // copy constructor CLine s1(s2); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:444:55: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 444 | inline CLine(const Point& p0, const Point& p1) {p = p0; v = Vector2d(p0, p1); Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:37: warning: implicitly-declared 'constexpr geoff_geometry::Circle& geoff_geometry::Circle::operator=(const geoff_geometry::Circle&)' is deprecated [-Wdeprecated-copy] 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:3: note: because 'geoff_geometry::Circle' has user-provided 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)' 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box::Box(geoff_geometry::Point&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:53: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box3d::Box3d(const geoff_geometry::Point3d&, const geoff_geometry::Point3d&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:59: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:71: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Span::Span(int, const geoff_geometry::Point&, const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:93: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:102: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:111: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In member function 'int geoff_geometry::Kurve::Get(int, geoff_geometry::Point3d&, geoff_geometry::Point3d&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:68: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:78: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp: In function 'int geoff_geometry::LineLineIntof(const geoff_geometry::Span&, const geoff_geometry::Span&, geoff_geometry::Point&, double*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:241:51: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 241 | #define INVALID_POINT Point(9.9999999e50, 0, false) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:57:8: note: in expansion of macro 'INVALID_POINT' 57 | p = INVALID_POINT; | ^~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:62:23: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 62 | p = v0 * t[0] + sp0.p0; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp: In function 'int geoff_geometry::LineArcIntof(const geoff_geometry::Span&, const geoff_geometry::Span&, geoff_geometry::Point&, geoff_geometry::Point&, double*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:87:27: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 87 | p0 = v1 * t[0] + line.p0; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:92:28: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 92 | p1 = v1 * t[1] + line.p0; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:97:10: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 97 | p0 = p1; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp: In function 'int geoff_geometry::ArcArcIntof(const geoff_geometry::Span&, const geoff_geometry::Span&, geoff_geometry::Point&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:110:17: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 110 | pLeft = arc0.p1; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:116:36: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 116 | if(nLeft == 0 && nRight) pLeft = pRight; | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp: In constructor 'geoff_geometry::Line::Line(const geoff_geometry::Point3d&, const geoff_geometry::Vector3d&, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:206:8: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 206 | p0 = p; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp: In constructor 'geoff_geometry::Line::Line(const geoff_geometry::Point3d&, const geoff_geometry::Point3d&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:215:8: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 215 | p0 = p; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp: In constructor 'geoff_geometry::Line::Line(const geoff_geometry::Span&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:224:11: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 224 | p0 = sp.p0; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:228:31: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 228 | box.min = Point3d(sp.box.min); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:229:31: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 229 | box.max = Point3d(sp.box.max); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp: In member function 'bool geoff_geometry::Line::atZ(double, geoff_geometry::Point3d&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:242:82: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 242 | p = Point3d(this->p0.x + t * this->v.getx(), this->p0.y + t * this->v.gety(), z); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In member function 'geoff_geometry::Line& geoff_geometry::Line::operator=(geoff_geometry::Line&&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:952:8: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 952 | class Line{ | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp: In member function 'bool geoff_geometry::Line::Shortest(const geoff_geometry::Line&, geoff_geometry::Line&, double&, double&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:277:58: note: synthesized method 'geoff_geometry::Line& geoff_geometry::Line::operator=(geoff_geometry::Line&&)' first required here 277 | lshort = Line(t1* this->v + this->p0, t2 * l2.v + l2.p0); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp: In function 'int geoff_geometry::Intof(const geoff_geometry::Line&, const geoff_geometry::Line&, geoff_geometry::Point3d&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:337:26: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 337 | intof = l0.v * t0 + l0.p0; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp: In function 'double geoff_geometry::Dist(const geoff_geometry::Line&, const geoff_geometry::Point3d&, geoff_geometry::Point3d&, double&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:351:24: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 351 | pnear = Near(l, p, t ); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp: In function 'double geoff_geometry::Dist(const geoff_geometry::Span&, const geoff_geometry::Point&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:400:16: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 400 | pnear = sp.p0; // nearpoint | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:404:16: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 404 | pnear = sp.p1; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:415:16: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 415 | pnear = sp.p0; // nearpoint | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:419:44: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 419 | pnear = v * (sp.radius / radiusp) + sp.pc; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:434:17: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 434 | pnear = sp.p1; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:439:16: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 439 | pnear = sp.p0; // nearpoint | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp: In function 'bool geoff_geometry::OnSpan(const geoff_geometry::Span&, const geoff_geometry::Point&, bool, geoff_geometry::Point&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:461:42: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 461 | pNear = On(Circle(sp.pc, sp.radius), p); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:464:30: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 464 | if(nearPoints) pOnSpan = pNear; | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:469:74: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 469 | if(nearPoints) pOnSpan = (p.Dist(sp.p0) >= p.Dist(sp.p1)) ?sp.p1 : sp.p0; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:479:42: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 479 | if(nearPoints) pNear = sp.vs * t + sp.p0; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:482:74: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 482 | if(nearPoints) pOnSpan = (p.Dist(sp.p0) >= p.Dist(sp.p1))?sp.p1 : sp.p0; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:485:30: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 485 | if(nearPoints) pOnSpan = pNear; | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp: In constructor 'geoff_geometry::Triangle3d::Triangle3d(const geoff_geometry::Point3d&, const geoff_geometry::Point3d&, const geoff_geometry::Point3d&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:493:11: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 493 | vert1 = p1; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:494:11: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 494 | vert2 = p2; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:495:11: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 495 | vert3 = p3; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp: In member function 'bool geoff_geometry::Triangle3d::Intof(const geoff_geometry::Line&, geoff_geometry::Point3d&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:539:24: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 539 | intof = line * t + l.p0; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Finite.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ [ 29%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/FileInfo.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/FileInfo.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/FileInfo.cpp [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMDS.dir/src/SMDS/duplicate.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMDS.dir/src/SMDS/duplicate.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS/duplicate.cpp [ 29%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/kurve/kurve.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea && /usr/bin/c++ -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -Darea_native_EXPORTS -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -fPIC -DNDEBUG -fPIC -pthread -o CMakeFiles/area-native.dir/kurve/kurve.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp [ 29%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/FileTemplate.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/FileTemplate.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/FileTemplate.cpp [ 29%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/FutureWatcherProgress.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/FutureWatcherProgress.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/FutureWatcherProgress.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, double, double, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:441:83: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 441 | inline CLine(const Point& p0, double dx, double dy, bool normalise = true){ p = p0; v = Vector2d(dx, dy); if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Vector2d&, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:442:81: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 442 | inline CLine(const Point& p0, const Vector2d& v0, bool normalise = true) {p = p0; v = v0; if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::CLine&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:443:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 443 | inline CLine( const CLine& s ) {p = s.p; v = s.v;}; // copy constructor CLine s1(s2); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:444:55: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 444 | inline CLine(const Point& p0, const Point& p1) {p = p0; v = Vector2d(p0, p1); Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:37: warning: implicitly-declared 'constexpr geoff_geometry::Circle& geoff_geometry::Circle::operator=(const geoff_geometry::Circle&)' is deprecated [-Wdeprecated-copy] 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:3: note: because 'geoff_geometry::Circle' has user-provided 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)' 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box::Box(geoff_geometry::Point&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:53: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box3d::Box3d(const geoff_geometry::Point3d&, const geoff_geometry::Point3d&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:59: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:71: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Span::Span(int, const geoff_geometry::Point&, const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:93: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:102: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:111: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In member function 'int geoff_geometry::Kurve::Get(int, geoff_geometry::Point3d&, geoff_geometry::Point3d&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:68: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:78: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp: In member function 'int geoff_geometry::SpanVertex::Get(int, geoff_geometry::Point&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:94:34: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 94 | pe = Point(x[offset], y[offset]); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:95:36: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 95 | pc = Point(xc[offset], yc[offset]); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp: In member function 'bool geoff_geometry::Span::JoinSeparateSpans(geoff_geometry::Span&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:145:27: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 145 | inters = one.Intof(two); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:150:47: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 150 | inters = one.Intof(-turnLeft * sp.dir, two); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:158:49: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 158 | inters = two.Intof(turnLeft * this->dir, one); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:163:59: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 163 | inters = one.Intof(-turnLeft * this->dir * sp.dir, two); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:167:23: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 167 | this->p1 = sp.p0 = inters; | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:167:23: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 167 | this->p1 = sp.p0 = inters; | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp: In member function 'geoff_geometry::Point geoff_geometry::Span::NearOn(const geoff_geometry::Point&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:335:14: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 335 | pn = Near(p); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp: In member function 'void geoff_geometry::Span::Transform(const geoff_geometry::Matrix&, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:343:22: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 343 | p0 = p0.Transform(m); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:344:22: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 344 | p1 = p1.Transform(m); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:346:23: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 346 | pc = pc.Transform(m); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp: In member function 'geoff_geometry::Point geoff_geometry::Span::MidPerim(double) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:379:29: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 379 | p = this->vs * d + this->p0; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:384:12: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 384 | p = v + pc; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp: In member function 'void geoff_geometry::Kurve::Add(const geoff_geometry::Kurve*, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:629:9: warning: implicitly-declared 'constexpr geoff_geometry::Matrix& geoff_geometry::Matrix::operator=(const geoff_geometry::Matrix&)' is deprecated [-Wdeprecated-copy] 629 | m = *k; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:161:3: note: because 'geoff_geometry::Matrix' has user-provided 'geoff_geometry::Matrix::Matrix(const geoff_geometry::Matrix&)' 161 | Matrix(const Matrix& m); // copy constructor | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/FileInfo.cpp: In member function 'Base::TimeInfo Base::FileInfo::lastModified() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/FileInfo.cpp:432:12: warning: implicitly-declared 'constexpr Base::TimeInfo::TimeInfo(const Base::TimeInfo&)' is deprecated [-Wdeprecated-copy] 432 | return ti; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/FileInfo.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/FileInfo.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/TimeInfo.h:110:1: note: because 'Base::TimeInfo' has user-provided 'void Base::TimeInfo::operator=(const Base::TimeInfo&)' 110 | TimeInfo::operator = (const TimeInfo &time) | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/FileInfo.cpp: In member function 'Base::TimeInfo Base::FileInfo::lastRead() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/FileInfo.cpp:455:12: warning: implicitly-declared 'constexpr Base::TimeInfo::TimeInfo(const Base::TimeInfo&)' is deprecated [-Wdeprecated-copy] 455 | return ti; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/FileInfo.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/FileInfo.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/TimeInfo.h:110:1: note: because 'Base::TimeInfo' has user-provided 'void Base::TimeInfo::operator=(const Base::TimeInfo&)' 110 | TimeInfo::operator = (const TimeInfo &time) | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp: In member function 'int geoff_geometry::Kurve::Get(int, geoff_geometry::Point&, geoff_geometry::Point&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:731:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 731 | pe = Point(p->x[offset], p->y[offset]); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:736:44: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 736 | pc = Point(p->xc[offset], p->yc[offset]); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp: In member function 'void geoff_geometry::Kurve::Get(geoff_geometry::Point&, geoff_geometry::Point&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:809:11: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 809 | ps = sp.p0; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:811:11: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 811 | pe = sp.p1; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp: In member function 'geoff_geometry::Point geoff_geometry::Kurve::Near(const geoff_geometry::Point&, int&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:928:23: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 928 | pNear = sp.NearOn(p); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:932:10: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 932 | pn = pNear; | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp: In member function 'geoff_geometry::Point geoff_geometry::Kurve::NearToVertex(const geoff_geometry::Point&, int&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:950:40: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 950 | if(!m_unit) tp = tp.Transform(inv_mat); // Inverse transform point (rather than transform each vertex!) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:961:10: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 961 | pn = ps; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp: In member function 'void geoff_geometry::Kurve::ChangeStart(const geoff_geometry::Point*, int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:993:15: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 993 | sp.p1 = *pNewStart; | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp: In member function 'void geoff_geometry::Kurve::ChangeEnd(const geoff_geometry::Point*, int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1034:36: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1034 | if(spanno == endSpanno)sp.p1 = *pNewEnd; | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp: In member function 'void geoff_geometry::Kurve::minmax(geoff_geometry::Point&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1048:29: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1048 | min = Point(1.0e61, 1.0e61); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1049:31: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1049 | max = Point(-1.0e61, -1.0e61); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp: In member function 'int geoff_geometry::Kurve::Intof(const geoff_geometry::Span&, std::vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1150:18: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1150 | temp.p1 = p[i]; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp: In function 'void geoff_geometry::bubblesort(std::vector&, std::vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1167:18: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1167 | p[j] = p[j+1]; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1168:15: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1168 | p[j+1] = temp; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp: In member function 'bool geoff_geometry::Kurve::Split(double, double)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1225:33: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1225 | sp.p0 = sp.p0.Transform(m); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1237:15: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1237 | sp.p0 = sp.p1; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp: In member function 'void geoff_geometry::Kurve::Reverse()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1270:9: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1270 | p0 = p1; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1271:10: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1271 | pc0 = pc1; | ^~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1273:11: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1273 | pend = pendp; | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1274:12: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1274 | pcend = pcendp; | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1298:9: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1298 | p0 = p1; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1299:10: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1299 | pc0 = pc1; | ^~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1301:11: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1301 | pend = pendp; | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1302:12: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1302 | pcend = pcendp; | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp: In member function 'geoff_geometry::Kurve geoff_geometry::Kurve::Part(int, const geoff_geometry::Point&, int, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1391:48: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1391 | ps = Near(fromPt,iStartSpanNr); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1395:29: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1395 | ps = span.p0; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1400:44: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1400 | pe = Near(toPt,iEndSpanNr); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1404:29: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1404 | pe = span.p1; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp: In member function 'geoff_geometry::Kurve geoff_geometry::Kurve::Part(double, double)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1480:27: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1480 | sp.p1 = sp.MidPerim(d); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp: In function 'void geoff_geometry::tangential_arc(const geoff_geometry::Point&, const geoff_geometry::Point&, const geoff_geometry::Vector2d&, geoff_geometry::Point&, int&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:1508:16: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 1508 | c = lshort.p0; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/kurve.cpp:6: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ [ 29%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/gzstream.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/gzstream.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/gzstream.cpp [ 29%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/GeometryPyCXX.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/GeometryPyCXX.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/GeometryPyCXX.cpp [ 29%] Linking CXX shared library ../../../lib/libSMDS.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/cmake -E cmake_link_script CMakeFiles/SMDS.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,libSMDS.so -o ../../../lib/libSMDS.so CMakeFiles/SMDS.dir/src/SMDS/SMDS_BallElement.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_Downward.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_EdgePosition.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_FaceOfEdges.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_FaceOfNodes.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_FacePosition.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_IteratorOfElements.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_LinearEdge.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_Mesh.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_Mesh0DElement.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshCell.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshEdge.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshElement.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshElementIDFactory.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshFace.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshGroup.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshIDFactory.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshNode.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshNodeIDFactory.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshObject.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_MeshVolume.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_PolygonalFaceOfNodes.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_PolyhedralVolumeOfNodes.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_Position.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticEdge.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticFaceOfNodes.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_QuadraticVolumeOfNodes.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_SpacePosition.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_UnstructuredGrid.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VertexPosition.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeOfFaces.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeOfNodes.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VolumeTool.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkCellIterator.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkEdge.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkFace.cpp.o CMakeFiles/SMDS.dir/src/SMDS/SMDS_VtkVolume.cpp.o CMakeFiles/SMDS.dir/src/SMDS/Utils_SALOME_Exception.cpp.o CMakeFiles/SMDS.dir/src/SMDS/chrono.cpp.o CMakeFiles/SMDS.dir/src/SMDS/duplicate.cpp.o -lmpi_cxx -lmpi /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKXDESTEP.so.7.4.1 /usr/lib64/libTKXDEIGES.so.7.4.1 /usr/lib64/libTKMeshVS.so.7.4.1 /usr/lib64/libvtkFiltersVerdict-8.2.so.1 /usr/lib64/libvtkverdict-8.2.so.1 /usr/lib64/libdouble-conversion.so /usr/lib64/liblz4.so /usr/lib64/liblzma.so /usr/lib64/libz.so /usr/lib64/libexpat.so /usr/lib64/libvtkIOMPIParallel-8.2.so.1 /usr/lib64/libjpeg.so /usr/lib64/libpng.so /usr/lib64/libtiff.so /usr/lib64/libvtkIOParallel-8.2.so.1 /usr/lib64/libvtkIONetCDF-8.2.so.1 /usr/lib64/libnetcdf.so /usr/lib64/libhdf5.so /usr/lib64/libdl.so /usr/lib64/libm.so /usr/lib64/libhdf5_hl.so /usr/lib64/libvtkexodusII-8.2.so.1 /usr/lib64/libjsoncpp.so /usr/lib64/libvtkFiltersParallelDIY2-8.2.so.1 /usr/lib64/libvtkInteractionStyle-8.2.so.1 /usr/lib64/libvtkRenderingFreeType-8.2.so.1 /usr/lib64/libfreetype.so /usr/lib64/libvtkRenderingOpenGL2-8.2.so.1 /usr/lib64/libGLEW.so /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKXCAF.so.7.4.1 /usr/lib64/libTKVCAF.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKV3d.so.7.4.1 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKService.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so -lfontconfig -lGL -lX11 -lXext -lXmu -lXi /usr/lib64/libvtkIOGeometry-8.2.so.1 /usr/lib64/libvtkIOImage-8.2.so.1 /usr/lib64/libvtkDICOMParser-8.2.so.1 /usr/lib64/libvtkmetaio-8.2.so.1 /usr/lib64/libz.so /usr/lib64/libnetcdf.so /usr/lib64/libvtkIOXML-8.2.so.1 /usr/lib64/libvtkIOXMLParser-8.2.so.1 /usr/lib64/libvtkFiltersParallel-8.2.so.1 /usr/lib64/libvtkFiltersModeling-8.2.so.1 /usr/lib64/libvtkParallelMPI-8.2.so.1 /usr/lib64/libvtkParallelCore-8.2.so.1 /usr/lib64/libvtkIOLegacy-8.2.so.1 /usr/lib64/libvtkIOCore-8.2.so.1 /usr/lib64/libvtkFiltersExtraction-8.2.so.1 /usr/lib64/libvtkFiltersStatistics-8.2.so.1 /usr/lib64/libvtkImagingFourier-8.2.so.1 /usr/lib64/libvtkImagingCore-8.2.so.1 /usr/lib64/libfreetype.so /usr/lib64/libvtkRenderingCore-8.2.so.1 /usr/lib64/libvtkFiltersSources-8.2.so.1 /usr/lib64/libvtkFiltersGeneral-8.2.so.1 /usr/lib64/libvtkCommonComputationalGeometry-8.2.so.1 /usr/lib64/libvtkFiltersGeometry-8.2.so.1 /usr/lib64/libvtkFiltersCore-8.2.so.1 /usr/lib64/libvtkCommonExecutionModel-8.2.so.1 /usr/lib64/libvtkCommonColor-8.2.so.1 /usr/lib64/libvtkCommonDataModel-8.2.so.1 /usr/lib64/libvtkCommonMisc-8.2.so.1 /usr/lib64/libvtkCommonSystem-8.2.so.1 /usr/lib64/libvtkCommonTransforms-8.2.so.1 /usr/lib64/libvtkCommonMath-8.2.so.1 /usr/lib64/libvtkCommonCore-8.2.so.1 /usr/lib64/libvtksys-8.2.so.1 -ldl /usr/lib64/libSM.so /usr/lib64/libICE.so /usr/lib64/libX11.so /usr/lib64/libXext.so /usr/lib64/libXt.so [ 29%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Handle.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Handle.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Handle.cpp [ 29%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/InputSource.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/InputSource.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/InputSource.cpp [ 29%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Interpreter.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Interpreter.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Interpreter.cpp [ 29%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/kurve/Matrix.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea && /usr/bin/c++ -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -Darea_native_EXPORTS -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -fPIC -DNDEBUG -fPIC -pthread -o CMakeFiles/area-native.dir/kurve/Matrix.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp [ 29%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/kurve/offset.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea && /usr/bin/c++ -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -Darea_native_EXPORTS -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -fPIC -DNDEBUG -fPIC -pthread -o CMakeFiles/area-native.dir/kurve/offset.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp [ 29%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Matrix.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Matrix.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Matrix.cpp [ 29%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/MatrixPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/MatrixPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/MatrixPyImp.cpp [ 29%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/MemDebug.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/MemDebug.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/MemDebug.cpp [ 29%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Parameter.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Parameter.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Parameter.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, double, double, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:441:83: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 441 | inline CLine(const Point& p0, double dx, double dy, bool normalise = true){ p = p0; v = Vector2d(dx, dy); if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Vector2d&, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:442:81: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 442 | inline CLine(const Point& p0, const Vector2d& v0, bool normalise = true) {p = p0; v = v0; if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::CLine&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:443:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 443 | inline CLine( const CLine& s ) {p = s.p; v = s.v;}; // copy constructor CLine s1(s2); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:444:55: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 444 | inline CLine(const Point& p0, const Point& p1) {p = p0; v = Vector2d(p0, p1); Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:37: warning: implicitly-declared 'constexpr geoff_geometry::Circle& geoff_geometry::Circle::operator=(const geoff_geometry::Circle&)' is deprecated [-Wdeprecated-copy] 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:3: note: because 'geoff_geometry::Circle' has user-provided 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)' 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box::Box(geoff_geometry::Point&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:53: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box3d::Box3d(const geoff_geometry::Point3d&, const geoff_geometry::Point3d&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:59: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:71: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Span::Span(int, const geoff_geometry::Point&, const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:93: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:102: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:111: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In member function 'int geoff_geometry::Kurve::Get(int, geoff_geometry::Point3d&, geoff_geometry::Point3d&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:68: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:78: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp: In copy constructor 'geoff_geometry::Matrix::Matrix(const geoff_geometry::Matrix&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:34:11: warning: implicitly-declared 'constexpr geoff_geometry::Matrix& geoff_geometry::Matrix::operator=(const geoff_geometry::Matrix&)' is deprecated [-Wdeprecated-copy] 34 | *this = m; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:32:2: note: because 'geoff_geometry::Matrix' has user-provided 'geoff_geometry::Matrix::Matrix(const geoff_geometry::Matrix&)' 32 | Matrix::Matrix( const Matrix& m) | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp: In member function 'void geoff_geometry::Matrix::Multiply(geoff_geometry::Matrix&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:178:11: warning: implicitly-declared 'constexpr geoff_geometry::Matrix& geoff_geometry::Matrix::operator=(const geoff_geometry::Matrix&)' is deprecated [-Wdeprecated-copy] 178 | *this = ret; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/Matrix.cpp:32:2: note: because 'geoff_geometry::Matrix' has user-provided 'geoff_geometry::Matrix::Matrix(const geoff_geometry::Matrix&)' 32 | Matrix::Matrix( const Matrix& m) | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, double, double, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:441:83: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 441 | inline CLine(const Point& p0, double dx, double dy, bool normalise = true){ p = p0; v = Vector2d(dx, dy); if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Vector2d&, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:442:81: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 442 | inline CLine(const Point& p0, const Vector2d& v0, bool normalise = true) {p = p0; v = v0; if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::CLine&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:443:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 443 | inline CLine( const CLine& s ) {p = s.p; v = s.v;}; // copy constructor CLine s1(s2); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:444:55: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 444 | inline CLine(const Point& p0, const Point& p1) {p = p0; v = Vector2d(p0, p1); Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:37: warning: implicitly-declared 'constexpr geoff_geometry::Circle& geoff_geometry::Circle::operator=(const geoff_geometry::Circle&)' is deprecated [-Wdeprecated-copy] 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:3: note: because 'geoff_geometry::Circle' has user-provided 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)' 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box::Box(geoff_geometry::Point&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:53: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box3d::Box3d(const geoff_geometry::Point3d&, const geoff_geometry::Point3d&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:59: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:71: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Span::Span(int, const geoff_geometry::Point&, const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:93: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:102: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:111: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In member function 'int geoff_geometry::Kurve::Get(int, geoff_geometry::Point3d&, geoff_geometry::Point3d&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:68: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:78: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In member function 'geoff_geometry::Span& geoff_geometry::Span::operator=(geoff_geometry::Span&&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:549:8: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 549 | class Span{ | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:549:8: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 549 | class Span{ | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:549:8: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 549 | class Span{ | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp: In member function 'int geoff_geometry::Kurve::OffsetMethod1(geoff_geometry::Kurve&, double, int, int, int&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:74:39: note: synthesized method 'geoff_geometry::Span& geoff_geometry::Span::operator=(geoff_geometry::Span&&)' first required here 74 | prevSpanOff = curSpan.Offset(offset); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In member function 'geoff_geometry::Span& geoff_geometry::Span::operator=(const geoff_geometry::Span&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:549:8: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 549 | class Span{ | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:549:8: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 549 | class Span{ | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:549:8: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 549 | class Span{ | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp: In member function 'int geoff_geometry::Kurve::OffsetMethod1(geoff_geometry::Kurve&, double, int, int, int&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:127:42: note: synthesized method 'geoff_geometry::Span& geoff_geometry::Span::operator=(const geoff_geometry::Span&)' first required here 127 | if(!curSpanOff.NullSpan)prevSpanOff = curSpanOff; | ^~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp: In function 'geoff_geometry::Kurve geoff_geometry::eliminateLoops(const geoff_geometry::Kurve&, const geoff_geometry::Kurve&, double, int&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:219:18: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 219 | spd.p1 = pInt; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:223:18: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 223 | spd.p1 = pIntOther; | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:225:36: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 225 | if(dd > spd.length) pInt = pIntOther; | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:233:18: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 233 | sp0.p1 = pInt; // ok so truncate this span to the intersection | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:239:20: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 239 | sp1.p0 = sp1.p1 ; // next | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp: In function 'bool geoff_geometry::DoesIntersInterfere(const geoff_geometry::Point&, const geoff_geometry::Kurve&, double)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:277:15: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 277 | sp.p0 = sp.p1; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp: In function 'void isoRadius(geoff_geometry::Span&, geoff_geometry::Span&, geoff_geometry::Span&, double)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:353:24: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 353 | blend.pc = b.Intof(a); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:374:45: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 374 | before.p1 = blend.p0 = before.Near(blend.pc); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:374:45: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 374 | before.p1 = blend.p0 = before.Near(blend.pc); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:375:43: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 375 | after.p0 = blend.p1 = after.Near(blend.pc); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:375:43: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 375 | after.p0 = blend.p1 = after.Near(blend.pc); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/offset.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 29%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/ParameterPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/ParameterPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/ParameterPy.cpp [ 29%] Built target SMDS /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/depend.internal". Scanning dependencies of target DriverSTL gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/src/DriverSTL/Basics_Utils.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DDriverSTL_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverSTL.dir/src/DriverSTL/Basics_Utils.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL/Basics_Utils.cpp [ 29%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/AreaClipper.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea && /usr/bin/c++ -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -Darea_native_EXPORTS -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -fPIC -DNDEBUG -fPIC -pthread -o CMakeFiles/area-native.dir/AreaClipper.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp [ 29%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/Adaptive.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea && /usr/bin/c++ -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -Darea_native_EXPORTS -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -fPIC -DNDEBUG -fPIC -pthread -o CMakeFiles/area-native.dir/Adaptive.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Adaptive.cpp /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/depend.internal". [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/src/DriverSTL/DriverSTL_R_SMDS_Mesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DDriverSTL_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverSTL.dir/src/DriverSTL/DriverSTL_R_SMDS_Mesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL/DriverSTL_R_SMDS_Mesh.cpp Scanning dependencies of target SMESHDS gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESHDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESHDS/SMESHDS_Command.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, double, double, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:441:83: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 441 | inline CLine(const Point& p0, double dx, double dy, bool normalise = true){ p = p0; v = Vector2d(dx, dy); if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Vector2d&, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:442:81: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 442 | inline CLine(const Point& p0, const Vector2d& v0, bool normalise = true) {p = p0; v = v0; if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::CLine&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:443:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 443 | inline CLine( const CLine& s ) {p = s.p; v = s.v;}; // copy constructor CLine s1(s2); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:444:55: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 444 | inline CLine(const Point& p0, const Point& p1) {p = p0; v = Vector2d(p0, p1); Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:37: warning: implicitly-declared 'constexpr geoff_geometry::Circle& geoff_geometry::Circle::operator=(const geoff_geometry::Circle&)' is deprecated [-Wdeprecated-copy] 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:3: note: because 'geoff_geometry::Circle' has user-provided 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)' 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box::Box(geoff_geometry::Point&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:53: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box3d::Box3d(const geoff_geometry::Point3d&, const geoff_geometry::Point3d&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:59: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:71: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Span::Span(int, const geoff_geometry::Point&, const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:93: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:102: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:111: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In member function 'int geoff_geometry::Kurve::Get(int, geoff_geometry::Point3d&, geoff_geometry::Point3d&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:68: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:78: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h: In member function 'void Point::Transform(const geoff_geometry::Matrix&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:69:20: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 69 | p = p.Transform(m); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/AreaClipper.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/MatrixPyImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/MatrixPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/MatrixPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL/DriverSTL_R_SMDS_Mesh.cpp: In member function 'Driver_Mesh::Status DriverSTL_R_SMDS_Mesh::readAscii(SMESH_File&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL/DriverSTL_R_SMDS_Mesh.cpp:243:11: warning: ignoring return value of 'int fscanf(FILE*, const char*, ...)' declared with attribute 'warn_unused_result' [-Wunused-result] 243 | fscanf(file,"%*s %*s %f %f %f\n",&normal[0],&normal[1],&normal[2]); | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL/DriverSTL_R_SMDS_Mesh.cpp:246:11: warning: ignoring return value of 'int fscanf(FILE*, const char*, ...)' declared with attribute 'warn_unused_result' [-Wunused-result] 246 | fscanf(file,"%*s %*s"); | ~~~~~~^~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL/DriverSTL_R_SMDS_Mesh.cpp:257:11: warning: ignoring return value of 'int fscanf(FILE*, const char*, ...)' declared with attribute 'warn_unused_result' [-Wunused-result] 257 | fscanf(file,"%*s"); | ~~~~~~^~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL/DriverSTL_R_SMDS_Mesh.cpp:260:11: warning: ignoring return value of 'int fscanf(FILE*, const char*, ...)' declared with attribute 'warn_unused_result' [-Wunused-result] 260 | fscanf(file,"%*s"); | ~~~~~~^~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL/DriverSTL_R_SMDS_Mesh.cpp: In function 'SMDS_MeshNode* readNode(FILE*, {anonymous}::TDataMapOfPntNodePtr&, SMDS_Mesh*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL/DriverSTL_R_SMDS_Mesh.cpp:188:9: warning: ignoring return value of 'int fscanf(FILE*, const char*, ...)' declared with attribute 'warn_unused_result' [-Wunused-result] 188 | fscanf(file,"%*s %f %f %f\n",&coord[0],&coord[1],&coord[2]); | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Document.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESHDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Document.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESHDS/SMESHDS_Document.cpp [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/src/DriverSTL/DriverSTL_W_SMDS_Mesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DDriverSTL_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverSTL.dir/src/DriverSTL/DriverSTL_W_SMDS_Mesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL/DriverSTL_W_SMDS_Mesh.cpp [ 29%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area-native.dir/clipper.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea && /usr/bin/c++ -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -Darea_native_EXPORTS -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -fPIC -DNDEBUG -fPIC -pthread -o CMakeFiles/area-native.dir/clipper.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/clipper.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/clipper.cpp: In function 'ClipperLib::Int128 ClipperLib::Int128Mul(ClipperLib::long64, ClipperLib::long64)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/clipper.cpp:372:22: warning: implicitly-declared 'constexpr ClipperLib::Int128& ClipperLib::Int128::operator=(const ClipperLib::Int128&)' is deprecated [-Wdeprecated-copy] 372 | if (negate) tmp = -tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/clipper.cpp:260:5: note: because 'ClipperLib::Int128' has user-provided 'ClipperLib::Int128::Int128(const ClipperLib::Int128&)' 260 | Int128(const Int128 &val): lo(val.lo), hi(val.hi){} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/clipper.cpp: In function 'void ClipperLib::InitEdge(ClipperLib::TEdge*, ClipperLib::TEdge*, ClipperLib::TEdge*, const ClipperLib::IntPoint&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/clipper.cpp:718:34: warning: 'void* memset(void*, int, size_t)' clearing an object of non-trivial type 'struct ClipperLib::TEdge'; use assignment or value-initialization instead [-Wclass-memaccess] 718 | std::memset(e, 0, sizeof(TEdge)); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/clipper.cpp:66:8: note: 'struct ClipperLib::TEdge' declared here 66 | struct TEdge { | ^~~~~ /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/depend.internal". Scanning dependencies of target DriverDAT gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/src/DriverDAT/DAT_Test.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DDriverDAT_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverDAT.dir/src/DriverDAT/DAT_Test.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT/DAT_Test.cpp [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Group.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESHDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Group.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESHDS/SMESHDS_Group.cpp [ 29%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Persistence.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Persistence.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Persistence.cpp [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_R_SMDS_Mesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DDriverDAT_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_R_SMDS_Mesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT/DriverDAT_R_SMDS_Mesh.cpp [ 29%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/PersistencePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/PersistencePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/PersistencePyImp.cpp [ 29%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/src/DriverSTL/SMESH_File.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DDriverSTL_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverSTL.dir/src/DriverSTL/SMESH_File.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL/SMESH_File.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Placement.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Placement.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Placement.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT/DriverDAT_R_SMDS_Mesh.cpp: In member function 'virtual Driver_Mesh::Status DriverDAT_R_SMDS_Mesh::Perform()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT/DriverDAT_R_SMDS_Mesh.cpp:61:9: warning: ignoring return value of 'int fscanf(FILE*, const char*, ...)' declared with attribute 'warn_unused_result' [-Wunused-result] 61 | fscanf(aFileId, "%d %d\n", &nbNodes, &nbCells); | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT/DriverDAT_R_SMDS_Mesh.cpp:71:11: warning: ignoring return value of 'int fscanf(FILE*, const char*, ...)' declared with attribute 'warn_unused_result' [-Wunused-result] 71 | fscanf(aFileId, "%d %e %e %e\n", &intNumPoint, &coordX, &coordY, &coordZ); | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT/DriverDAT_R_SMDS_Mesh.cpp:86:11: warning: ignoring return value of 'int fscanf(FILE*, const char*, ...)' declared with attribute 'warn_unused_result' [-Wunused-result] 86 | fscanf(aFileId, "%d %d", &intNumMaille, &ValElement); | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT/DriverDAT_R_SMDS_Mesh.cpp:92:13: warning: ignoring return value of 'int fscanf(FILE*, const char*, ...)' declared with attribute 'warn_unused_result' [-Wunused-result] 92 | fscanf(aFileId, "%d", &NoeudMaille); | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 30%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_R_SMESHDS_Document.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DDriverDAT_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_R_SMESHDS_Document.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT/DriverDAT_R_SMESHDS_Document.cpp [ 30%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_R_SMESHDS_Mesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DDriverDAT_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_R_SMESHDS_Mesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT/DriverDAT_R_SMESHDS_Mesh.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/PlacementPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/PlacementPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/PlacementPyImp.cpp [ 30%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_GroupBase.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESHDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_GroupBase.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESHDS/SMESHDS_GroupBase.cpp [ 30%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMDS_Mesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DDriverDAT_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMDS_Mesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT/DriverDAT_W_SMDS_Mesh.cpp [ 30%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMESHDS_Document.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DDriverDAT_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMESHDS_Document.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT/DriverDAT_W_SMESHDS_Document.cpp [ 30%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMESHDS_Mesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DCSFDB -DDriverDAT_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMESHDS_Mesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT/DriverDAT_W_SMESHDS_Mesh.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/PersistencePyImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/PersistencePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/PersistencePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 30%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverSTL.dir/src/DriverSTL/STL_Test.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DDriverSTL_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverSTL.dir/src/DriverSTL/STL_Test.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL/STL_Test.cpp [ 30%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_GroupOnFilter.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESHDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_GroupOnFilter.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESHDS/SMESHDS_GroupOnFilter.cpp [ 30%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_GroupOnGeom.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESHDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_GroupOnGeom.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESHDS/SMESHDS_GroupOnGeom.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/PlacementPyImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/PlacementPy.cpp:87:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 87 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/PlacementPy.cpp:87:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 30%] Linking CXX shared library ../../../lib/libDriverSTL.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/cmake -E cmake_link_script CMakeFiles/DriverSTL.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,libDriverSTL.so -o ../../../lib/libDriverSTL.so CMakeFiles/DriverSTL.dir/src/DriverSTL/Basics_Utils.cpp.o CMakeFiles/DriverSTL.dir/src/DriverSTL/DriverSTL_R_SMDS_Mesh.cpp.o CMakeFiles/DriverSTL.dir/src/DriverSTL/DriverSTL_W_SMDS_Mesh.cpp.o CMakeFiles/DriverSTL.dir/src/DriverSTL/SMESH_File.cpp.o CMakeFiles/DriverSTL.dir/src/DriverSTL/STL_Test.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../lib/libDriver.so ../../../lib/libSMDS.so /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread -lmpi_cxx -lmpi /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKXDESTEP.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXDEIGES.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKXCAF.so.7.4.1 /usr/lib64/libTKVCAF.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKMeshVS.so.7.4.1 /usr/lib64/libTKV3d.so.7.4.1 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKService.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so -lfontconfig -lGL -lX11 -lXext -lXmu -lXi /usr/lib64/libvtkFiltersVerdict-8.2.so.1 /usr/lib64/libvtkverdict-8.2.so.1 /usr/lib64/libdouble-conversion.so /usr/lib64/liblz4.so /usr/lib64/liblzma.so /usr/lib64/libexpat.so /usr/lib64/libvtkIOMPIParallel-8.2.so.1 /usr/lib64/libjpeg.so /usr/lib64/libpng.so /usr/lib64/libtiff.so /usr/lib64/libvtkIOParallel-8.2.so.1 /usr/lib64/libvtkIOGeometry-8.2.so.1 /usr/lib64/libvtkIOImage-8.2.so.1 /usr/lib64/libvtkDICOMParser-8.2.so.1 /usr/lib64/libvtkmetaio-8.2.so.1 /usr/lib64/libz.so /usr/lib64/libvtkIONetCDF-8.2.so.1 /usr/lib64/libhdf5.so /usr/lib64/libdl.so /usr/lib64/libm.so /usr/lib64/libhdf5_hl.so /usr/lib64/libvtkexodusII-8.2.so.1 /usr/lib64/libnetcdf.so /usr/lib64/libjsoncpp.so /usr/lib64/libvtkFiltersParallelDIY2-8.2.so.1 /usr/lib64/libvtkIOXML-8.2.so.1 /usr/lib64/libvtkIOXMLParser-8.2.so.1 /usr/lib64/libvtkFiltersParallel-8.2.so.1 /usr/lib64/libvtkFiltersModeling-8.2.so.1 /usr/lib64/libvtkParallelMPI-8.2.so.1 /usr/lib64/libvtkParallelCore-8.2.so.1 /usr/lib64/libvtkIOLegacy-8.2.so.1 /usr/lib64/libvtkIOCore-8.2.so.1 /usr/lib64/libvtkInteractionStyle-8.2.so.1 /usr/lib64/libvtkFiltersExtraction-8.2.so.1 /usr/lib64/libvtkFiltersStatistics-8.2.so.1 /usr/lib64/libvtkImagingFourier-8.2.so.1 /usr/lib64/libvtkImagingCore-8.2.so.1 /usr/lib64/libvtkRenderingFreeType-8.2.so.1 /usr/lib64/libfreetype.so /usr/lib64/libvtkRenderingOpenGL2-8.2.so.1 /usr/lib64/libvtkRenderingCore-8.2.so.1 /usr/lib64/libvtkFiltersSources-8.2.so.1 /usr/lib64/libvtkFiltersGeneral-8.2.so.1 /usr/lib64/libvtkCommonComputationalGeometry-8.2.so.1 /usr/lib64/libvtkFiltersGeometry-8.2.so.1 /usr/lib64/libvtkFiltersCore-8.2.so.1 /usr/lib64/libvtkCommonExecutionModel-8.2.so.1 /usr/lib64/libvtkCommonColor-8.2.so.1 /usr/lib64/libvtkCommonDataModel-8.2.so.1 /usr/lib64/libvtkCommonMisc-8.2.so.1 /usr/lib64/libvtkCommonSystem-8.2.so.1 /usr/lib64/libvtkCommonTransforms-8.2.so.1 /usr/lib64/libvtkCommonMath-8.2.so.1 /usr/lib64/libvtkCommonCore-8.2.so.1 /usr/lib64/libvtksys-8.2.so.1 -ldl /usr/lib64/libSM.so /usr/lib64/libICE.so /usr/lib64/libX11.so /usr/lib64/libXext.so /usr/lib64/libXt.so /usr/lib64/libGLEW.so -licudata -licui18n -licuuc -lpthread [ 30%] Linking CXX shared library ../../../../lib/libarea-native.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea && /usr/bin/cmake -E cmake_link_script CMakeFiles/area-native.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -fPIC -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,libarea-native.so -o ../../../../lib/libarea-native.so CMakeFiles/area-native.dir/Arc.cpp.o CMakeFiles/area-native.dir/Area.cpp.o CMakeFiles/area-native.dir/AreaDxf.cpp.o CMakeFiles/area-native.dir/AreaOrderer.cpp.o CMakeFiles/area-native.dir/AreaPocket.cpp.o CMakeFiles/area-native.dir/Circle.cpp.o CMakeFiles/area-native.dir/Curve.cpp.o CMakeFiles/area-native.dir/dxf.cpp.o CMakeFiles/area-native.dir/kurve/Construction.cpp.o CMakeFiles/area-native.dir/kurve/Finite.cpp.o CMakeFiles/area-native.dir/kurve/kurve.cpp.o CMakeFiles/area-native.dir/kurve/Matrix.cpp.o CMakeFiles/area-native.dir/kurve/offset.cpp.o CMakeFiles/area-native.dir/AreaClipper.cpp.o CMakeFiles/area-native.dir/Adaptive.cpp.o CMakeFiles/area-native.dir/clipper.cpp.o -lmpi_cxx -lmpi [ 30%] Linking CXX shared library ../../../lib/libDriverDAT.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/cmake -E cmake_link_script CMakeFiles/DriverDAT.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,libDriverDAT.so -o ../../../lib/libDriverDAT.so CMakeFiles/DriverDAT.dir/src/DriverDAT/DAT_Test.cpp.o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_R_SMDS_Mesh.cpp.o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_R_SMESHDS_Document.cpp.o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_R_SMESHDS_Mesh.cpp.o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMDS_Mesh.cpp.o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMESHDS_Document.cpp.o CMakeFiles/DriverDAT.dir/src/DriverDAT/DriverDAT_W_SMESHDS_Mesh.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../lib/libSMDS.so ../../../lib/libDriver.so /usr/lib64/libvtkFiltersVerdict-8.2.so.1 /usr/lib64/libvtkverdict-8.2.so.1 /usr/lib64/libdouble-conversion.so /usr/lib64/liblz4.so /usr/lib64/liblzma.so /usr/lib64/libexpat.so /usr/lib64/libvtkIOMPIParallel-8.2.so.1 /usr/lib64/libjpeg.so /usr/lib64/libpng.so /usr/lib64/libtiff.so /usr/lib64/libvtkIOParallel-8.2.so.1 /usr/lib64/libvtkIOGeometry-8.2.so.1 /usr/lib64/libvtkIOImage-8.2.so.1 /usr/lib64/libvtkDICOMParser-8.2.so.1 /usr/lib64/libvtkmetaio-8.2.so.1 /usr/lib64/libz.so /usr/lib64/libvtkIONetCDF-8.2.so.1 /usr/lib64/libhdf5.so /usr/lib64/libdl.so /usr/lib64/libm.so /usr/lib64/libhdf5_hl.so /usr/lib64/libvtkexodusII-8.2.so.1 /usr/lib64/libnetcdf.so /usr/lib64/libjsoncpp.so /usr/lib64/libvtkFiltersParallelDIY2-8.2.so.1 /usr/lib64/libvtkIOXML-8.2.so.1 /usr/lib64/libvtkIOXMLParser-8.2.so.1 /usr/lib64/libvtkFiltersParallel-8.2.so.1 /usr/lib64/libvtkFiltersModeling-8.2.so.1 /usr/lib64/libvtkParallelMPI-8.2.so.1 /usr/lib64/libvtkParallelCore-8.2.so.1 /usr/lib64/libvtkIOLegacy-8.2.so.1 /usr/lib64/libvtkIOCore-8.2.so.1 /usr/lib64/libvtkInteractionStyle-8.2.so.1 /usr/lib64/libvtkFiltersExtraction-8.2.so.1 /usr/lib64/libvtkFiltersStatistics-8.2.so.1 /usr/lib64/libvtkImagingFourier-8.2.so.1 /usr/lib64/libvtkImagingCore-8.2.so.1 /usr/lib64/libvtkRenderingFreeType-8.2.so.1 /usr/lib64/libvtkRenderingOpenGL2-8.2.so.1 /usr/lib64/libvtkRenderingCore-8.2.so.1 /usr/lib64/libvtkFiltersSources-8.2.so.1 /usr/lib64/libvtkFiltersGeneral-8.2.so.1 /usr/lib64/libvtkCommonComputationalGeometry-8.2.so.1 /usr/lib64/libvtkFiltersGeometry-8.2.so.1 /usr/lib64/libvtkFiltersCore-8.2.so.1 /usr/lib64/libvtkCommonExecutionModel-8.2.so.1 /usr/lib64/libvtkCommonColor-8.2.so.1 /usr/lib64/libvtkCommonDataModel-8.2.so.1 /usr/lib64/libvtkCommonMisc-8.2.so.1 /usr/lib64/libvtkCommonSystem-8.2.so.1 /usr/lib64/libvtkCommonTransforms-8.2.so.1 /usr/lib64/libvtkCommonMath-8.2.so.1 /usr/lib64/libvtkCommonCore-8.2.so.1 /usr/lib64/libvtksys-8.2.so.1 /usr/lib64/libSM.so /usr/lib64/libICE.so /usr/lib64/libX11.so /usr/lib64/libXext.so /usr/lib64/libXt.so /usr/lib64/libGLEW.so -lmpi_cxx -lmpi /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKXDESTEP.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXDEIGES.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKXCAF.so.7.4.1 /usr/lib64/libTKVCAF.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKMeshVS.so.7.4.1 /usr/lib64/libTKV3d.so.7.4.1 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKService.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so -lfontconfig -lGL -lX11 -lXext -lXmu -lXi /usr/lib64/libfreetype.so [ 30%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Hypothesis.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESHDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Hypothesis.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESHDS/SMESHDS_Hypothesis.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 30%] Built target area-native /usr/bin/gmake -f src/Mod/Path/libarea/CMakeFiles/area.dir/build.make src/Mod/Path/libarea/CMakeFiles/area.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea/CMakeFiles/area.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea/CMakeFiles/area.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea/CMakeFiles/area.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea/CMakeFiles/area.dir/depend.internal". Scanning dependencies of target area gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Path/libarea/CMakeFiles/area.dir/build.make src/Mod/Path/libarea/CMakeFiles/area.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 30%] Building CXX object src/Mod/Path/libarea/CMakeFiles/area.dir/PythonStuff.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_PYTHON_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -Darea_EXPORTS -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -fPIC -DNDEBUG -fPIC -pthread -o CMakeFiles/area.dir/PythonStuff.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/PyExport.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/PyExport.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/PyExport.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 30%] Built target DriverDAT [ 30%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Mesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESHDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Mesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESHDS/SMESHDS_Mesh.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 30%] Built target DriverSTL [ 30%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Script.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESHDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Script.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESHDS/SMESHDS_Script.cpp [ 30%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_SubMesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESHDS_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_SubMesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESHDS/SMESHDS_SubMesh.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/PyObjectBase.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/PyObjectBase.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/PyObjectBase.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Reader.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Reader.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Reader.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Rotation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Rotation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Rotation.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/RotationPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/RotationPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/RotationPyImp.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Sequencer.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Sequencer.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Sequencer.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/PyObjectBase.cpp:133:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 133 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/PyObjectBase.cpp:133:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, double, double, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:441:83: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 441 | inline CLine(const Point& p0, double dx, double dy, bool normalise = true){ p = p0; v = Vector2d(dx, dy); if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Vector2d&, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:442:81: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 442 | inline CLine(const Point& p0, const Vector2d& v0, bool normalise = true) {p = p0; v = v0; if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::CLine&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:443:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 443 | inline CLine( const CLine& s ) {p = s.p; v = s.v;}; // copy constructor CLine s1(s2); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:444:55: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 444 | inline CLine(const Point& p0, const Point& p1) {p = p0; v = Vector2d(p0, p1); Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:37: warning: implicitly-declared 'constexpr geoff_geometry::Circle& geoff_geometry::Circle::operator=(const geoff_geometry::Circle&)' is deprecated [-Wdeprecated-copy] 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:483:3: note: because 'geoff_geometry::Circle' has user-provided 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)' 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box::Box(geoff_geometry::Point&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:509:53: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box3d::Box3d(const geoff_geometry::Point3d&, const geoff_geometry::Point3d&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:59: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:523:71: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In constructor 'geoff_geometry::Span::Span(int, const geoff_geometry::Point&, const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:93: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:102: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:594:111: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h: In member function 'int geoff_geometry::Kurve::Get(int, geoff_geometry::Point3d&, geoff_geometry::Point3d&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:68: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:836:78: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Stream.cpp.o In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h: In member function 'void Point::Transform(const geoff_geometry::Matrix&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:69:20: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 69 | p = p.Transform(m); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Stream.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Stream.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Swap.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Swap.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Swap.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/swigpyrun.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/swigpyrun.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/swigpyrun.cpp In file included from /usr/include/boost/config/header_deprecated.hpp:18, from /usr/include/boost/progress.hpp:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:33: /usr/include/boost/progress.hpp: At global scope: /usr/include/boost/progress.hpp:23:1: note: '#pragma message: This header is deprecated. Use the facilities in or instead.' 23 | BOOST_HEADER_DEPRECATED( "the facilities in or " ) | ^~~~~~~~~~~~~~~~~~~~~~~ /usr/include/boost/timer.hpp:21:1: note: '#pragma message: This header is deprecated. Use the facilities in instead.' 21 | BOOST_HEADER_DEPRECATED( "the facilities in " ) | ^~~~~~~~~~~~~~~~~~~~~~~ [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/TimeInfo.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/TimeInfo.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/TimeInfo.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/swigpyrun.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/swigpyrun.inl: In function 'void Swig_python::cleanupSWIG_T(const char*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/swigpyrun.inl:74:25: warning: unused variable 'interp' [-Wunused-variable] 74 | PyInterpreterState *interp = PyThreadState_GET()->interp; | ^~~~~~ /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Tools.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Tools.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp: In function 'boost::python::tuple transformed_point(const geoff_geometry::Matrix&, double, double, double)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:68:24: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 68 | p = p.Transform(matrix); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/PythonStuff.cpp:7: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Tools2D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Tools2D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools2D.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/TimeInfo.cpp: In member function 'void Base::TimeInfo::setCurrent()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/TimeInfo.cpp:68:22: warning: 'int ftime(timeb*)' is deprecated [-Wdeprecated-declarations] 68 | ftime(&timebuffer); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/TimeInfo.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/TimeInfo.cpp:31: /usr/include/sys/timeb.h:39:12: note: declared here 39 | extern int ftime (struct timeb *__timebuf) | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/TimeInfo.cpp: In static member function 'static Base::TimeInfo Base::TimeInfo::null()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/TimeInfo.cpp:113:12: warning: implicitly-declared 'constexpr Base::TimeInfo::TimeInfo(const Base::TimeInfo&)' is deprecated [-Wdeprecated-copy] 113 | return ti; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/TimeInfo.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/TimeInfo.h:110:1: note: because 'Base::TimeInfo' has user-provided 'void Base::TimeInfo::operator=(const Base::TimeInfo&)' 110 | TimeInfo::operator = (const TimeInfo &time) | ^~~~~~~~ [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Translate.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Translate.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Translate.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Type.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Type.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Type.cpp [ 30%] Linking CXX shared library ../../../lib/libSMESHDS.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/cmake -E cmake_link_script CMakeFiles/SMESHDS.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,libSMESHDS.so -o ../../../lib/libSMESHDS.so CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Command.cpp.o CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Document.cpp.o CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Group.cpp.o CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_GroupBase.cpp.o CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_GroupOnFilter.cpp.o CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_GroupOnGeom.cpp.o CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Hypothesis.cpp.o CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Mesh.cpp.o CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_Script.cpp.o CMakeFiles/SMESHDS.dir/src/SMESHDS/SMESHDS_SubMesh.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../lib/libSMDS.so /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread -lmpi_cxx -lmpi /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKXDESTEP.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXDEIGES.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKXCAF.so.7.4.1 /usr/lib64/libTKVCAF.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKMeshVS.so.7.4.1 /usr/lib64/libTKV3d.so.7.4.1 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKService.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so -lfontconfig -lGL -lX11 -lXext -lXmu -lXi /usr/lib64/libvtkFiltersVerdict-8.2.so.1 /usr/lib64/libvtkverdict-8.2.so.1 /usr/lib64/libdouble-conversion.so /usr/lib64/liblz4.so /usr/lib64/liblzma.so /usr/lib64/libexpat.so /usr/lib64/libvtkIOMPIParallel-8.2.so.1 /usr/lib64/libjpeg.so /usr/lib64/libpng.so /usr/lib64/libtiff.so /usr/lib64/libvtkIOParallel-8.2.so.1 /usr/lib64/libvtkIOGeometry-8.2.so.1 /usr/lib64/libvtkIOImage-8.2.so.1 /usr/lib64/libvtkDICOMParser-8.2.so.1 /usr/lib64/libvtkmetaio-8.2.so.1 /usr/lib64/libz.so /usr/lib64/libvtkIONetCDF-8.2.so.1 /usr/lib64/libhdf5.so /usr/lib64/libdl.so /usr/lib64/libm.so /usr/lib64/libhdf5_hl.so /usr/lib64/libvtkexodusII-8.2.so.1 /usr/lib64/libnetcdf.so /usr/lib64/libjsoncpp.so /usr/lib64/libvtkFiltersParallelDIY2-8.2.so.1 /usr/lib64/libvtkIOXML-8.2.so.1 /usr/lib64/libvtkIOXMLParser-8.2.so.1 /usr/lib64/libvtkFiltersParallel-8.2.so.1 /usr/lib64/libvtkFiltersModeling-8.2.so.1 /usr/lib64/libvtkParallelMPI-8.2.so.1 /usr/lib64/libvtkParallelCore-8.2.so.1 /usr/lib64/libvtkIOLegacy-8.2.so.1 /usr/lib64/libvtkIOCore-8.2.so.1 /usr/lib64/libvtkInteractionStyle-8.2.so.1 /usr/lib64/libvtkFiltersExtraction-8.2.so.1 /usr/lib64/libvtkFiltersStatistics-8.2.so.1 /usr/lib64/libvtkImagingFourier-8.2.so.1 /usr/lib64/libvtkImagingCore-8.2.so.1 /usr/lib64/libvtkRenderingFreeType-8.2.so.1 /usr/lib64/libfreetype.so /usr/lib64/libvtkRenderingOpenGL2-8.2.so.1 /usr/lib64/libvtkRenderingCore-8.2.so.1 /usr/lib64/libvtkFiltersSources-8.2.so.1 /usr/lib64/libvtkFiltersGeneral-8.2.so.1 /usr/lib64/libvtkCommonComputationalGeometry-8.2.so.1 /usr/lib64/libvtkFiltersGeometry-8.2.so.1 /usr/lib64/libvtkFiltersCore-8.2.so.1 /usr/lib64/libvtkCommonExecutionModel-8.2.so.1 /usr/lib64/libvtkCommonColor-8.2.so.1 /usr/lib64/libvtkCommonDataModel-8.2.so.1 /usr/lib64/libvtkCommonMisc-8.2.so.1 /usr/lib64/libvtkCommonSystem-8.2.so.1 /usr/lib64/libvtkCommonTransforms-8.2.so.1 /usr/lib64/libvtkCommonMath-8.2.so.1 /usr/lib64/libvtkCommonCore-8.2.so.1 /usr/lib64/libvtksys-8.2.so.1 -ldl /usr/lib64/libSM.so /usr/lib64/libICE.so /usr/lib64/libX11.so /usr/lib64/libXext.so /usr/lib64/libXt.so /usr/lib64/libGLEW.so -licudata -licui18n -licuuc -lpthread [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Uuid.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Uuid.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Uuid.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/RotationPyImp.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/RotationPy.cpp:90:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 90 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/RotationPy.cpp:90:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Vector3D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Vector3D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Vector3D.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 30%] Built target SMESHDS [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/VectorPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/VectorPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/VectorPyImp.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/ViewProj.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/ViewProj.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/ViewProj.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Writer.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Writer.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Writer.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.cpp: In member function 'void Base::StopWatch::start()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.cpp:215:16: warning: 'void QTime::start()' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 215 | d->t.start(); | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.cpp:31: /usr/include/qt5/QtCore/qdatetime.h:235:55: note: declared here 235 | QT_DEPRECATED_X("Use QElapsedTimer instead") void start(); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.cpp: In member function 'int Base::StopWatch::restart()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.cpp:220:25: warning: 'int QTime::restart()' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 220 | return d->t.restart(); | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.cpp:31: /usr/include/qt5/QtCore/qdatetime.h:236:54: note: declared here 236 | QT_DEPRECATED_X("Use QElapsedTimer instead") int restart(); | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.cpp: In member function 'int Base::StopWatch::elapsed()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.cpp:225:25: warning: 'int QTime::elapsed() const' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 225 | return d->t.elapsed(); | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.cpp:31: /usr/include/qt5/QtCore/qdatetime.h:237:54: note: declared here 237 | QT_DEPRECATED_X("Use QElapsedTimer instead") int elapsed() const; | ^~~~~~~ [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/XMLTools.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/XMLTools.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/XMLTools.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/UnitsApi.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/UnitsApi.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/UnitsApi.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/UnitsApiPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/UnitsApiPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/UnitsApiPy.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/VectorPyImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/VectorPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/VectorPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/UnitsSchema.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/UnitsSchema.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/UnitsSchema.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/UnitsSchemaInternal.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/UnitsSchemaInternal.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/UnitsSchemaInternal.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/UnitsSchemaMKS.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/UnitsSchemaMKS.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/UnitsSchemaMKS.cpp /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/depend.internal". Scanning dependencies of target DriverUNV gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 30%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_R_SMDS_Mesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DDriverUNV_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_R_SMDS_Mesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV/DriverUNV_R_SMDS_Mesh.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/UnitsSchemaImperial1.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/UnitsSchemaImperial1.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/UnitsSchemaImperial1.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/UnitsSchemaCentimeters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/UnitsSchemaCentimeters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/UnitsSchemaCentimeters.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/UnitsSchemaMmMin.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/UnitsSchemaMmMin.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/UnitsSchemaMmMin.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Quantity.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Quantity.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Quantity.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/QuantityPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/QuantityPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/QuantityPyImp.cpp [ 30%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_R_SMESHDS_Document.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DDriverUNV_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_R_SMESHDS_Document.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV/DriverUNV_R_SMESHDS_Document.cpp [ 30%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_R_SMESHDS_Mesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DDriverUNV_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_R_SMESHDS_Mesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV/DriverUNV_R_SMESHDS_Mesh.cpp [ 30%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/Unit.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/Unit.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.cpp [ 31%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/UnitPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/UnitPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/UnitPyImp.cpp [ 31%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_W_SMDS_Mesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DDriverUNV_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_W_SMDS_Mesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV/DriverUNV_W_SMDS_Mesh.cpp [ 31%] Building C object src/Base/CMakeFiles/FreeCADBase.dir/PyTools.c.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/cc -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/PyTools.c.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/PyTools.c [ 31%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_W_SMESHDS_Document.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DDriverUNV_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_W_SMESHDS_Document.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV/DriverUNV_W_SMESHDS_Document.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/QuantityPyImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/QuantityPy.cpp:85:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 85 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/QuantityPy.cpp:85:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 31%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/PreCompiled.cpp [ 31%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/__/zipios++/basicentry.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/__/zipios++/basicentry.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/basicentry.cpp [ 31%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_W_SMESHDS_Mesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DDriverUNV_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_W_SMESHDS_Mesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV/DriverUNV_W_SMESHDS_Mesh.cpp [ 31%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/src/DriverUNV/UNV164_Structure.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DDriverUNV_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverUNV.dir/src/DriverUNV/UNV164_Structure.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV/UNV164_Structure.cpp [ 31%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/__/zipios++/collcoll.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/__/zipios++/collcoll.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/collcoll.cpp [ 32%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/src/DriverUNV/UNV2411_Structure.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DDriverUNV_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverUNV.dir/src/DriverUNV/UNV2411_Structure.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV/UNV2411_Structure.cpp [ 32%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/__/zipios++/deflateoutputstreambuf.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/__/zipios++/deflateoutputstreambuf.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/deflateoutputstreambuf.cpp [ 32%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/src/DriverUNV/UNV2412_Structure.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DDriverUNV_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverUNV.dir/src/DriverUNV/UNV2412_Structure.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV/UNV2412_Structure.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/UnitPyImp.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/UnitPy.cpp:86:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 86 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base/UnitPy.cpp:86:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 32%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/src/DriverUNV/UNV2417_Structure.cpp.o [ 32%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/src/DriverUNV/UNV2420_Structure.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DDriverUNV_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverUNV.dir/src/DriverUNV/UNV2417_Structure.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV/UNV2417_Structure.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DDriverUNV_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverUNV.dir/src/DriverUNV/UNV2420_Structure.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV/UNV2420_Structure.cpp [ 32%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/__/zipios++/dircoll.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/__/zipios++/dircoll.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/dircoll.cpp [ 32%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/__/zipios++/directory.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/__/zipios++/directory.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/directory.cpp [ 32%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/src/DriverUNV/UNV_Test.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DDriverUNV_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverUNV.dir/src/DriverUNV/UNV_Test.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV/UNV_Test.cpp [ 32%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/DriverUNV.dir/src/DriverUNV/UNV_Utilities.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DDriverUNV_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/DriverUNV.dir/src/DriverUNV/UNV_Utilities.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV/UNV_Utilities.cpp [ 32%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/__/zipios++/fcoll.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/__/zipios++/fcoll.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/fcoll.cpp [ 32%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/__/zipios++/fcollexceptions.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/__/zipios++/fcollexceptions.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/fcollexceptions.cpp [ 32%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/__/zipios++/fileentry.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/__/zipios++/fileentry.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/fileentry.cpp [ 32%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/__/zipios++/filepath.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/__/zipios++/filepath.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/filepath.cpp [ 32%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/__/zipios++/filterinputstreambuf.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/__/zipios++/filterinputstreambuf.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/filterinputstreambuf.cpp [ 32%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/__/zipios++/filteroutputstreambuf.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/__/zipios++/filteroutputstreambuf.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/filteroutputstreambuf.cpp [ 32%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/__/zipios++/gzipoutputstream.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/__/zipios++/gzipoutputstream.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/gzipoutputstream.cpp [ 32%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/__/zipios++/gzipoutputstreambuf.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/__/zipios++/gzipoutputstreambuf.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/gzipoutputstreambuf.cpp [ 32%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/__/zipios++/inflateinputstreambuf.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/__/zipios++/inflateinputstreambuf.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/inflateinputstreambuf.cpp [ 32%] Linking CXX shared library ../../../lib/libDriverUNV.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/cmake -E cmake_link_script CMakeFiles/DriverUNV.dir/link.txt --verbose=1 [ 32%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/__/zipios++/zipfile.cpp.o /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,libDriverUNV.so -o ../../../lib/libDriverUNV.so CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_R_SMDS_Mesh.cpp.o CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_R_SMESHDS_Document.cpp.o CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_R_SMESHDS_Mesh.cpp.o CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_W_SMDS_Mesh.cpp.o CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_W_SMESHDS_Document.cpp.o CMakeFiles/DriverUNV.dir/src/DriverUNV/DriverUNV_W_SMESHDS_Mesh.cpp.o CMakeFiles/DriverUNV.dir/src/DriverUNV/UNV164_Structure.cpp.o CMakeFiles/DriverUNV.dir/src/DriverUNV/UNV2411_Structure.cpp.o CMakeFiles/DriverUNV.dir/src/DriverUNV/UNV2412_Structure.cpp.o CMakeFiles/DriverUNV.dir/src/DriverUNV/UNV2417_Structure.cpp.o CMakeFiles/DriverUNV.dir/src/DriverUNV/UNV2420_Structure.cpp.o CMakeFiles/DriverUNV.dir/src/DriverUNV/UNV_Test.cpp.o CMakeFiles/DriverUNV.dir/src/DriverUNV/UNV_Utilities.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../lib/libSMESHDS.so ../../../lib/libSMDS.so ../../../lib/libDriver.so /usr/lib64/libvtkFiltersVerdict-8.2.so.1 /usr/lib64/libvtkverdict-8.2.so.1 /usr/lib64/libdouble-conversion.so /usr/lib64/liblz4.so /usr/lib64/liblzma.so /usr/lib64/libexpat.so /usr/lib64/libvtkIOMPIParallel-8.2.so.1 /usr/lib64/libjpeg.so /usr/lib64/libpng.so /usr/lib64/libtiff.so /usr/lib64/libvtkIOParallel-8.2.so.1 /usr/lib64/libvtkIOGeometry-8.2.so.1 /usr/lib64/libvtkIOImage-8.2.so.1 /usr/lib64/libvtkDICOMParser-8.2.so.1 /usr/lib64/libvtkmetaio-8.2.so.1 /usr/lib64/libz.so /usr/lib64/libvtkIONetCDF-8.2.so.1 /usr/lib64/libhdf5.so /usr/lib64/libdl.so /usr/lib64/libm.so /usr/lib64/libhdf5_hl.so /usr/lib64/libvtkexodusII-8.2.so.1 /usr/lib64/libnetcdf.so /usr/lib64/libjsoncpp.so /usr/lib64/libvtkFiltersParallelDIY2-8.2.so.1 /usr/lib64/libvtkIOXML-8.2.so.1 /usr/lib64/libvtkIOXMLParser-8.2.so.1 /usr/lib64/libvtkFiltersParallel-8.2.so.1 /usr/lib64/libvtkFiltersModeling-8.2.so.1 /usr/lib64/libvtkParallelMPI-8.2.so.1 /usr/lib64/libvtkParallelCore-8.2.so.1 /usr/lib64/libvtkIOLegacy-8.2.so.1 /usr/lib64/libvtkIOCore-8.2.so.1 /usr/lib64/libvtkInteractionStyle-8.2.so.1 /usr/lib64/libvtkFiltersExtraction-8.2.so.1 /usr/lib64/libvtkFiltersStatistics-8.2.so.1 /usr/lib64/libvtkImagingFourier-8.2.so.1 /usr/lib64/libvtkImagingCore-8.2.so.1 /usr/lib64/libvtkRenderingFreeType-8.2.so.1 /usr/lib64/libvtkRenderingOpenGL2-8.2.so.1 /usr/lib64/libvtkRenderingCore-8.2.so.1 /usr/lib64/libvtkFiltersSources-8.2.so.1 /usr/lib64/libvtkFiltersGeneral-8.2.so.1 /usr/lib64/libvtkCommonComputationalGeometry-8.2.so.1 /usr/lib64/libvtkFiltersGeometry-8.2.so.1 /usr/lib64/libvtkFiltersCore-8.2.so.1 /usr/lib64/libvtkCommonExecutionModel-8.2.so.1 /usr/lib64/libvtkCommonColor-8.2.so.1 /usr/lib64/libvtkCommonDataModel-8.2.so.1 /usr/lib64/libvtkCommonMisc-8.2.so.1 /usr/lib64/libvtkCommonSystem-8.2.so.1 /usr/lib64/libvtkCommonTransforms-8.2.so.1 /usr/lib64/libvtkCommonMath-8.2.so.1 /usr/lib64/libvtkCommonCore-8.2.so.1 /usr/lib64/libvtksys-8.2.so.1 /usr/lib64/libSM.so /usr/lib64/libICE.so /usr/lib64/libX11.so /usr/lib64/libXext.so /usr/lib64/libXt.so /usr/lib64/libGLEW.so /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread -lmpi_cxx -lmpi /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKXDESTEP.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXDEIGES.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKXCAF.so.7.4.1 /usr/lib64/libTKVCAF.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKMeshVS.so.7.4.1 /usr/lib64/libTKV3d.so.7.4.1 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKService.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so -lfontconfig -lGL -lX11 -lXext -lXmu -lXi /usr/lib64/libfreetype.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/__/zipios++/zipfile.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/zipfile.cpp [ 32%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/__/zipios++/ziphead.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/__/zipios++/ziphead.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/ziphead.cpp [ 32%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/__/zipios++/zipheadio.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/__/zipios++/zipheadio.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/zipheadio.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 32%] Built target DriverUNV /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/depend.internal". Scanning dependencies of target SMESH gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 32%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/__/zipios++/zipinputstream.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/__/zipios++/zipinputstream.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/zipinputstream.cpp /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/build [ 32%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/__/zipios++/zipinputstreambuf.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/__/zipios++/zipinputstreambuf.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/zipinputstreambuf.cpp gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 32%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/Controls/SMESH_Controls.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/Controls/SMESH_Controls.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp [ 32%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/__/zipios++/zipoutputstreambuf.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/__/zipios++/zipoutputstreambuf.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/zipoutputstreambuf.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/ziphead.cpp: In member function 'virtual zipios::FileEntry* zipios::ZipLocalEntry::clone() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/ziphead.cpp:208:35: warning: implicitly-declared 'zipios::ZipLocalEntry::ZipLocalEntry(const zipios::ZipLocalEntry&)' is deprecated [-Wdeprecated-copy] 208 | return new ZipLocalEntry( *this ) ; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/ziphead.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/ziphead.h:38:25: note: because 'zipios::ZipLocalEntry' has user-provided 'zipios::ZipLocalEntry& zipios::ZipLocalEntry::operator=(const zipios::ZipLocalEntry&)' 38 | inline ZipLocalEntry &operator=( const class ZipLocalEntry &src ) ; | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/ziphead.cpp: In member function 'virtual zipios::FileEntry* zipios::ZipCDirEntry::clone() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/ziphead.cpp:261:34: warning: implicitly-declared 'zipios::ZipCDirEntry::ZipCDirEntry(const zipios::ZipCDirEntry&)' is deprecated [-Wdeprecated-copy] 261 | return new ZipCDirEntry( *this ) ; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/ziphead.cpp:58:15: note: because 'zipios::ZipCDirEntry' has user-provided 'zipios::ZipCDirEntry& zipios::ZipCDirEntry::operator=(const zipios::ZipCDirEntry&)' 58 | ZipCDirEntry &ZipCDirEntry::operator=( const class ZipCDirEntry &src ) { | ^~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/ziphead.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/ziphead.h: In copy constructor 'zipios::ZipCDirEntry::ZipCDirEntry(const zipios::ZipCDirEntry&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/ziphead.h:102:18: warning: implicitly-declared 'zipios::ZipLocalEntry::ZipLocalEntry(const zipios::ZipLocalEntry&)' is deprecated [-Wdeprecated-copy] 102 | class BaseExport ZipCDirEntry : public ZipLocalEntry { | ^~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/ziphead.h:38:25: note: because 'zipios::ZipLocalEntry' has user-provided 'zipios::ZipLocalEntry& zipios::ZipLocalEntry::operator=(const zipios::ZipLocalEntry&)' 38 | inline ZipLocalEntry &operator=( const class ZipLocalEntry &src ) ; | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/ziphead.cpp: In member function 'virtual zipios::FileEntry* zipios::ZipCDirEntry::clone() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/ziphead.cpp:261:34: note: synthesized method 'zipios::ZipCDirEntry::ZipCDirEntry(const zipios::ZipCDirEntry&)' first required here 261 | return new ZipCDirEntry( *this ) ; | ^ [ 32%] Building CXX object src/Base/CMakeFiles/FreeCADBase.dir/__/zipios++/zipoutputstream.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADBase_EXPORTS -DHAVE_CONFIG_H -DHAVE_SWIG=1 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADBase.dir/__/zipios++/zipoutputstream.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/zipoutputstream.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/zipoutputstreambuf.cpp: In member function 'void zipios::ZipOutputStreambuf::putNextEntry(const zipios::ZipCDirEntry&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/zipoutputstreambuf.cpp:78:43: warning: implicitly-declared 'zipios::ZipLocalEntry::ZipLocalEntry(const zipios::ZipLocalEntry&)' is deprecated [-Wdeprecated-copy] 78 | os << static_cast< ZipLocalEntry >( ent ) ; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/deflateoutputstreambuf.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/zipoutputstreambuf.h:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/zipoutputstreambuf.cpp:11: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/ziphead.h:38:25: note: because 'zipios::ZipLocalEntry' has user-provided 'zipios::ZipLocalEntry& zipios::ZipLocalEntry::operator=(const zipios::ZipLocalEntry&)' 38 | inline ZipLocalEntry &operator=( const class ZipLocalEntry &src ) ; | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/zipoutputstreambuf.cpp: In member function 'void zipios::ZipOutputStreambuf::updateEntryHeaderInfo()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/zipoutputstreambuf.cpp:160:45: warning: implicitly-declared 'zipios::ZipLocalEntry::ZipLocalEntry(const zipios::ZipLocalEntry&)' is deprecated [-Wdeprecated-copy] 160 | os << static_cast< ZipLocalEntry >( entry ) ; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/deflateoutputstreambuf.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/zipoutputstreambuf.h:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/zipoutputstreambuf.cpp:11: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/ziphead.h:38:25: note: because 'zipios::ZipLocalEntry' has user-provided 'zipios::ZipLocalEntry& zipios::ZipLocalEntry::operator=(const zipios::ZipLocalEntry&)' 38 | inline ZipLocalEntry &operator=( const class ZipLocalEntry &src ) ; | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/zipinputstreambuf.cpp: In member function 'zipios::ConstEntryPointer zipios::ZipInputStreambuf::getNextEntry()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/zipinputstreambuf.cpp:78:41: warning: implicitly-declared 'zipios::ZipLocalEntry::ZipLocalEntry(const zipios::ZipLocalEntry&)' is deprecated [-Wdeprecated-copy] 78 | return new ZipLocalEntry( _curr_entry ) ; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/zipinputstreambuf.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/zipinputstreambuf.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/ziphead.h:38:25: note: because 'zipios::ZipLocalEntry' has user-provided 'zipios::ZipLocalEntry& zipios::ZipLocalEntry::operator=(const zipios::ZipLocalEntry&)' 38 | inline ZipLocalEntry &operator=( const class ZipLocalEntry &src ) ; | ^~~~~~~~ [ 32%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/DriverGMF.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/DriverGMF.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/DriverGMF.cpp [ 32%] Linking CXX shared module ../../../../lib/area.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/libarea && /usr/bin/cmake -E cmake_link_script CMakeFiles/area.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -fPIC -DNDEBUG -Wl,--as-needed -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -shared -o ../../../../lib/area.so CMakeFiles/area.dir/PythonStuff.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../lib/libarea-native.so /usr/lib64/libboost_python38.so.1.75.0 /usr/lib64/libpython3.8.so -lmpi_cxx -lmpi -ldl -lpthread -lutil /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/ziphead.h: In instantiation of 'void __gnu_cxx::new_allocator<_Tp>::construct(_Up*, _Args&& ...) [with _Up = zipios::ZipCDirEntry; _Args = {const zipios::ZipCDirEntry&}; _Tp = zipios::ZipCDirEntry]': /usr/include/c++/10/bits/alloc_traits.h:512:17: required from 'static void std::allocator_traits >::construct(std::allocator_traits >::allocator_type&, _Up*, _Args&& ...) [with _Up = zipios::ZipCDirEntry; _Args = {const zipios::ZipCDirEntry&}; _Tp = zipios::ZipCDirEntry; std::allocator_traits >::allocator_type = std::allocator]' /usr/include/c++/10/bits/stl_vector.h:1192:30: required from 'void std::vector<_Tp, _Alloc>::push_back(const value_type&) [with _Tp = zipios::ZipCDirEntry; _Alloc = std::allocator; std::vector<_Tp, _Alloc>::value_type = zipios::ZipCDirEntry]' /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/zipoutputstreambuf.cpp:69:29: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/ziphead.h:102:18: warning: implicitly-declared 'zipios::ZipLocalEntry::ZipLocalEntry(const zipios::ZipLocalEntry&)' is deprecated [-Wdeprecated-copy] 102 | class BaseExport ZipCDirEntry : public ZipLocalEntry { | ^~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/ziphead.h:38:25: note: because 'zipios::ZipLocalEntry' has user-provided 'zipios::ZipLocalEntry& zipios::ZipLocalEntry::operator=(const zipios::ZipLocalEntry&)' 38 | inline ZipLocalEntry &operator=( const class ZipLocalEntry &src ) ; | ^~~~~~~~ In file included from /usr/include/c++/10/aarch64-mageia-linux-gnu/bits/c++allocator.h:33, from /usr/include/c++/10/bits/allocator.h:46, from /usr/include/c++/10/vector:64, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/zipios++/zipoutputstreambuf.cpp:5: /usr/include/c++/10/ext/new_allocator.h:150:4: note: synthesized method 'zipios::ZipCDirEntry::ZipCDirEntry(const zipios::ZipCDirEntry&)' first required here 150 | { ::new((void *)__p) _Up(std::forward<_Args>(__args)...); } | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 32%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/DriverGMF_Read.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/DriverGMF_Read.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/DriverGMF_Read.cpp [ 32%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/DriverGMF_Write.cpp.o [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/DriverMED_Family.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/DriverGMF_Write.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/DriverGMF_Write.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/DriverMED_Family.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/DriverMED_Family.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 33%] Built target area [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/DriverMED_R_SMESHDS_Mesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/DriverMED_R_SMESHDS_Mesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/DriverMED_R_SMESHDS_Mesh.cpp [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/DriverMED_W_Field.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/DriverMED_W_Field.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/DriverMED_W_Field.cpp [ 33%] Linking CXX shared library ../../lib/libFreeCADBase.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Base && /usr/bin/cmake -E cmake_link_script CMakeFiles/FreeCADBase.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,libFreeCADBase.so -o ../../lib/libFreeCADBase.so CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxxextensions.c.o CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxx_extensions.cxx.o CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxxsupport.cxx.o CMakeFiles/FreeCADBase.dir/usr/src/CXX/IndirectPythonInterface.cxx.o CMakeFiles/FreeCADBase.dir/usr/src/CXX/cxx_exceptions.cxx.o CMakeFiles/FreeCADBase.dir/Axis.cpp.o CMakeFiles/FreeCADBase.dir/AxisPyImp.cpp.o CMakeFiles/FreeCADBase.dir/Base64.cpp.o CMakeFiles/FreeCADBase.dir/BaseClass.cpp.o CMakeFiles/FreeCADBase.dir/BaseClassPyImp.cpp.o CMakeFiles/FreeCADBase.dir/BoundBoxPyImp.cpp.o CMakeFiles/FreeCADBase.dir/Builder3D.cpp.o CMakeFiles/FreeCADBase.dir/Console.cpp.o CMakeFiles/FreeCADBase.dir/CoordinateSystem.cpp.o CMakeFiles/FreeCADBase.dir/CoordinateSystemPyImp.cpp.o CMakeFiles/FreeCADBase.dir/Debugger.cpp.o CMakeFiles/FreeCADBase.dir/Exception.cpp.o CMakeFiles/FreeCADBase.dir/ExceptionFactory.cpp.o CMakeFiles/FreeCADBase.dir/Factory.cpp.o CMakeFiles/FreeCADBase.dir/FileInfo.cpp.o CMakeFiles/FreeCADBase.dir/FileTemplate.cpp.o CMakeFiles/FreeCADBase.dir/FutureWatcherProgress.cpp.o CMakeFiles/FreeCADBase.dir/gzstream.cpp.o CMakeFiles/FreeCADBase.dir/GeometryPyCXX.cpp.o CMakeFiles/FreeCADBase.dir/Handle.cpp.o CMakeFiles/FreeCADBase.dir/InputSource.cpp.o CMakeFiles/FreeCADBase.dir/Interpreter.cpp.o CMakeFiles/FreeCADBase.dir/Matrix.cpp.o CMakeFiles/FreeCADBase.dir/MatrixPyImp.cpp.o CMakeFiles/FreeCADBase.dir/MemDebug.cpp.o CMakeFiles/FreeCADBase.dir/Parameter.cpp.o CMakeFiles/FreeCADBase.dir/ParameterPy.cpp.o CMakeFiles/FreeCADBase.dir/Persistence.cpp.o CMakeFiles/FreeCADBase.dir/PersistencePyImp.cpp.o CMakeFiles/FreeCADBase.dir/Placement.cpp.o CMakeFiles/FreeCADBase.dir/PlacementPyImp.cpp.o CMakeFiles/FreeCADBase.dir/PyExport.cpp.o CMakeFiles/FreeCADBase.dir/PyObjectBase.cpp.o CMakeFiles/FreeCADBase.dir/Reader.cpp.o CMakeFiles/FreeCADBase.dir/Rotation.cpp.o CMakeFiles/FreeCADBase.dir/RotationPyImp.cpp.o CMakeFiles/FreeCADBase.dir/Sequencer.cpp.o CMakeFiles/FreeCADBase.dir/Stream.cpp.o CMakeFiles/FreeCADBase.dir/Swap.cpp.o CMakeFiles/FreeCADBase.dir/swigpyrun.cpp.o CMakeFiles/FreeCADBase.dir/TimeInfo.cpp.o CMakeFiles/FreeCADBase.dir/Tools.cpp.o CMakeFiles/FreeCADBase.dir/Tools2D.cpp.o CMakeFiles/FreeCADBase.dir/Translate.cpp.o CMakeFiles/FreeCADBase.dir/Type.cpp.o CMakeFiles/FreeCADBase.dir/Uuid.cpp.o CMakeFiles/FreeCADBase.dir/Vector3D.cpp.o CMakeFiles/FreeCADBase.dir/VectorPyImp.cpp.o CMakeFiles/FreeCADBase.dir/ViewProj.cpp.o CMakeFiles/FreeCADBase.dir/Writer.cpp.o CMakeFiles/FreeCADBase.dir/XMLTools.cpp.o CMakeFiles/FreeCADBase.dir/UnitsApi.cpp.o CMakeFiles/FreeCADBase.dir/UnitsApiPy.cpp.o CMakeFiles/FreeCADBase.dir/UnitsSchema.cpp.o CMakeFiles/FreeCADBase.dir/UnitsSchemaInternal.cpp.o CMakeFiles/FreeCADBase.dir/UnitsSchemaMKS.cpp.o CMakeFiles/FreeCADBase.dir/UnitsSchemaImperial1.cpp.o CMakeFiles/FreeCADBase.dir/UnitsSchemaCentimeters.cpp.o CMakeFiles/FreeCADBase.dir/UnitsSchemaMmMin.cpp.o CMakeFiles/FreeCADBase.dir/Quantity.cpp.o CMakeFiles/FreeCADBase.dir/QuantityPyImp.cpp.o CMakeFiles/FreeCADBase.dir/Unit.cpp.o CMakeFiles/FreeCADBase.dir/UnitPyImp.cpp.o CMakeFiles/FreeCADBase.dir/PyTools.c.o CMakeFiles/FreeCADBase.dir/PreCompiled.cpp.o CMakeFiles/FreeCADBase.dir/__/zipios++/basicentry.cpp.o CMakeFiles/FreeCADBase.dir/__/zipios++/collcoll.cpp.o CMakeFiles/FreeCADBase.dir/__/zipios++/deflateoutputstreambuf.cpp.o CMakeFiles/FreeCADBase.dir/__/zipios++/dircoll.cpp.o CMakeFiles/FreeCADBase.dir/__/zipios++/directory.cpp.o CMakeFiles/FreeCADBase.dir/__/zipios++/fcoll.cpp.o CMakeFiles/FreeCADBase.dir/__/zipios++/fcollexceptions.cpp.o CMakeFiles/FreeCADBase.dir/__/zipios++/fileentry.cpp.o CMakeFiles/FreeCADBase.dir/__/zipios++/filepath.cpp.o CMakeFiles/FreeCADBase.dir/__/zipios++/filterinputstreambuf.cpp.o CMakeFiles/FreeCADBase.dir/__/zipios++/filteroutputstreambuf.cpp.o CMakeFiles/FreeCADBase.dir/__/zipios++/gzipoutputstream.cpp.o CMakeFiles/FreeCADBase.dir/__/zipios++/gzipoutputstreambuf.cpp.o CMakeFiles/FreeCADBase.dir/__/zipios++/inflateinputstreambuf.cpp.o CMakeFiles/FreeCADBase.dir/__/zipios++/zipfile.cpp.o CMakeFiles/FreeCADBase.dir/__/zipios++/ziphead.cpp.o CMakeFiles/FreeCADBase.dir/__/zipios++/zipheadio.cpp.o CMakeFiles/FreeCADBase.dir/__/zipios++/zipinputstream.cpp.o CMakeFiles/FreeCADBase.dir/__/zipios++/zipinputstreambuf.cpp.o CMakeFiles/FreeCADBase.dir/__/zipios++/zipoutputstreambuf.cpp.o CMakeFiles/FreeCADBase.dir/__/zipios++/zipoutputstream.cpp.o -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libz.so /usr/lib64/libQt5Core.so.5.15.2 -lutil -ldl -licudata -licui18n -licuuc -lpthread [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/DriverMED_W_SMESHDS_Mesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/DriverMED_W_SMESHDS_Mesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/DriverMED_W_SMESHDS_Mesh.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 33%] Built target FreeCADBase /usr/bin/gmake -f src/App/CMakeFiles/FreeCADApp.dir/build.make src/App/CMakeFiles/FreeCADApp.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 33%] Building files out of FreeCADTest.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/python3 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Tools/PythonToCPP.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FreeCADTest.py TestScript.h [ 33%] Building files out of FreeCADInit.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/python3 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Tools/PythonToCPP.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FreeCADInit.py InitScript.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/CMakeFiles/FreeCADApp.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/CMakeFiles/FreeCADApp.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/CMakeFiles/FreeCADApp.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/CMakeFiles/FreeCADApp.dir/depend.internal". /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/DriverMED_W_Field.cpp: In member function 'bool DriverMED_W_Field::Set(SMESHDS_Mesh*, const string&, SMDSAbs_ElementType, int, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/DriverMED_W_Field.cpp:160:18: warning: '*' in boolean context, suggest '&&' instead [-Wint-in-bool-context] 160 | return nbElems * nbComps; | ~~~~~~~~^~~~~~~~~ Scanning dependencies of target FreeCADApp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/App/CMakeFiles/FreeCADApp.dir/build.make src/App/CMakeFiles/FreeCADApp.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 33%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/Annotation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/Annotation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Annotation.cpp : warning: ISO C++11 requires whitespace after the macro name [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/GEOMUtils.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/GEOMUtils.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/GEOMUtils.cpp [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_Algorithm.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/MED_Algorithm.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/MED_Algorithm.cpp [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_CoordUtils.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/MED_CoordUtils.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/MED_CoordUtils.cpp [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_Factory.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/MED_Factory.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/MED_Factory.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Annotation.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Annotation.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_GaussDef.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/MED_GaussDef.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/MED_GaussDef.cpp [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_GaussUtils.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/MED_GaussUtils.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/MED_GaussUtils.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp: In member function 'virtual double SMESH::Controls::MultiConnection2D::GetValue(long int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp:1964:76: warning: 'aNode0' may be used uninitialized in this function [-Wmaybe-uninitialized] 1964 | SMDS_ElemIteratorPtr anElemIter = aNode->GetInverseElementIterator(); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp: In member function 'void SMESH::Controls::Length2D::GetValues(SMESH::Controls::Length2D::TValues&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp:1886:49: warning: 'aNodeId[1]' may be used uninitialized in this function [-Wmaybe-uninitialized] 1886 | Value aValue(aLength,aNodeId[0],aNodeId[1]); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp:1886:49: warning: 'aNodeId[0]' may be used uninitialized in this function [-Wmaybe-uninitialized] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp:1850:50: warning: 'aNodeId[2]' may be used uninitialized in this function [-Wmaybe-uninitialized] 1850 | Value aValue1(aLength,aNodeId[1],aNodeId[2]); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp:1850:50: warning: 'aNodeId[1]' may be used uninitialized in this function [-Wmaybe-uninitialized] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp:1851:50: warning: 'aNodeId[0]' may be used uninitialized in this function [-Wmaybe-uninitialized] 1851 | Value aValue2(aLength,aNodeId[2],aNodeId[0]); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp:1849:15: warning: 'aLength' may be used uninitialized in this function [-Wmaybe-uninitialized] 1849 | aLength += P[2].Distance(P[0]); | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~ [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_Structures.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/MED_Structures.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/MED_Structures.cpp [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_Utilities.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/MED_Utilities.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/MED_Utilities.cpp [ 33%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/Document.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/Document.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.cpp : warning: ISO C++11 requires whitespace after the macro name [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_V2_2_Wrapper.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/MED_V2_2_Wrapper.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/MED_V2_2_Wrapper.cpp [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/MED_Wrapper.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/MED_Wrapper.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/MED_Wrapper.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/MED_Utilities.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/MED_Utilities.cpp: In destructor 'MED::PrefixPrinter::~PrefixPrinter()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc/MED_Utilities.hxx:68:3: warning: 'throw' will always call 'terminate' [-Wterminate] 68 | throw TYPE(aStream.str().c_str());\ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/MED_Utilities.cpp:49:7: note: in expansion of macro 'EXCEPTION' 49 | EXCEPTION(runtime_error,"PrefixPrinter::~PrefixPrinter() - myCounter("< instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_HypoFilter.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/SMESH_HypoFilter.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_HypoFilter.cpp [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_Hypothesis.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/SMESH_Hypothesis.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_Hypothesis.cpp /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/opencascade/gp_XY.hxx:291, from /usr/include/opencascade/gp_Trsf2d.hxx:25, from /usr/include/opencascade/gp_Trsf.lxx:20, from /usr/include/opencascade/gp_Trsf.hxx:372, from /usr/include/opencascade/TopLoc_ItemLocation.hxx:26, from /usr/include/opencascade/TopLoc_Location.lxx:18, from /usr/include/opencascade/TopLoc_Location.hxx:170, from /usr/include/opencascade/TopoDS_Shape.hxx:24, from /usr/include/opencascade/TopTools_IndexedMapOfShape.hxx:20, from /usr/include/opencascade/TopExp.hxx:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc/SMESH_Block.hxx:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_Block.cpp:27: /usr/include/opencascade/gp_XY.lxx: In member function 'void SMESH_Block::refineParametersOnFace(const gp_Pnt&, gp_XYZ&, int)': /usr/include/opencascade/gp_XY.lxx:25:46: warning: 'V' may be used uninitialized in this function [-Wmaybe-uninitialized] 25 | const Standard_Real Y) : x (X), y (Y) { } | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_Block.cpp:932:19: note: 'V' was declared here 932 | Standard_Real U,V; | ^ In file included from /usr/include/opencascade/gp_XY.hxx:291, from /usr/include/opencascade/gp_Trsf2d.hxx:25, from /usr/include/opencascade/gp_Trsf.lxx:20, from /usr/include/opencascade/gp_Trsf.hxx:372, from /usr/include/opencascade/TopLoc_ItemLocation.hxx:26, from /usr/include/opencascade/TopLoc_Location.lxx:18, from /usr/include/opencascade/TopLoc_Location.hxx:170, from /usr/include/opencascade/TopoDS_Shape.hxx:24, from /usr/include/opencascade/TopTools_IndexedMapOfShape.hxx:20, from /usr/include/opencascade/TopExp.hxx:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc/SMESH_Block.hxx:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_Block.cpp:27: /usr/include/opencascade/gp_XY.lxx:25:46: warning: 'U' may be used uninitialized in this function [-Wmaybe-uninitialized] 25 | const Standard_Real Y) : x (X), y (Y) { } | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_Block.cpp:932:17: note: 'U' was declared here 932 | Standard_Real U,V; | ^ [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_Mesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/SMESH_Mesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_Mesh.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_Block.cpp: In static member function 'static bool SMESH_Block::FindBlockShapes(const TopoDS_Shell&, const TopoDS_Vertex&, const TopoDS_Vertex&, TopTools_IndexedMapOfOrientedShape&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_Block.cpp:1854:28: warning: 'iFound2' may be used uninitialized in this function [-Wmaybe-uninitialized] 1854 | if ( i != iFound1 && i != iFound2 ) | ~~^~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_Block.cpp:1854:12: warning: 'iFound1' may be used uninitialized in this function [-Wmaybe-uninitialized] 1854 | if ( i != iFound1 && i != iFound2 ) | ~~^~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_Block.cpp:1786:44: warning: 'minX' may be used uninitialized in this function [-Wmaybe-uninitialized] 1786 | if ( val < minVal || ( val == minVal && P.X() < minX )) { | ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~ [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_MeshAlgos.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/SMESH_MeshAlgos.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshAlgos.cpp [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_MeshEditor.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/SMESH_MeshEditor.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_MeshVSLink.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/SMESH_MeshVSLink.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshVSLink.cpp [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_MesherHelper.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/SMESH_MesherHelper.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MesherHelper.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc/SMDS_ElemIterator.hxx:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc/SMDS_MeshElement.hxx:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc/SMDS_MeshNode.hxx:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc/SMESHDS_Mesh.hxx:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc/SMESH_Mesh.hxx:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_Mesh.cpp:27: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_Octree.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/SMESH_Octree.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_Octree.cpp [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_OctreeNode.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/SMESH_OctreeNode.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_OctreeNode.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_Mesh.cpp: In member function 'void SMESH_Mesh::ExportSAUV(const char*, const char*, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_Mesh.cpp:1507:9: warning: ignoring return value of 'int system(const char*)' declared with attribute 'warn_unused_result' [-Wunused-result] 1507 | system(cmd.c_str()); | ~~~~~~^~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_Mesh.cpp:1517:9: warning: ignoring return value of 'int system(const char*)' declared with attribute 'warn_unused_result' [-Wunused-result] 1517 | system(cmd.c_str()); | ~~~~~~^~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_Mesh.cpp:1526:9: warning: ignoring return value of 'int system(const char*)' declared with attribute 'warn_unused_result' [-Wunused-result] 1526 | system(cmd.c_str()); | ~~~~~~^~~~~~~~~~~~~ [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_Pattern.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/SMESH_Pattern.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_Pattern.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshAlgos.cpp: In function 'const SMDS_MeshElement* SMESH_MeshAlgos::FindFaceInSet(const SMDS_MeshNode*, const SMDS_MeshNode*, const TIDSortedElemSet&, const TIDSortedElemSet&, int*, int*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshAlgos.cpp:1590:23: warning: 'i2' may be used uninitialized in this function [-Wmaybe-uninitialized] 1590 | if ( n2ind ) *n2ind = i2; | ~~~~~~~^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshAlgos.cpp:1589:23: warning: 'i1' may be used uninitialized in this function [-Wmaybe-uninitialized] 1589 | if ( n1ind ) *n1ind = i1; | ~~~~~~~^~~~ [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_ProxyMesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/SMESH_ProxyMesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_ProxyMesh.cpp [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_TryCatch.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/SMESH_TryCatch.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_TryCatch.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MesherHelper.cpp:3974:8: warning: 'bool {anonymous}::QFace::IsSpoiled(const {anonymous}::QLink*) const' defined but not used [-Wunused-function] 3974 | bool QFace::IsSpoiled(const QLink* bentLink ) const | ^~~~~ [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/SMESH_subMesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/SMESH_subMesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_subMesh.cpp [ 33%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/Utils_ExceptHandlers.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/Utils_ExceptHandlers.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/Utils_ExceptHandlers.cpp [ 34%] Building C object src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/libmesh.c.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/cc -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DSMESH_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -DNDEBUG -fPIC -pthread -o CMakeFiles/SMESH.dir/src/SMESH/libmesh.c.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c: In function 'GmfOpenMesh': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:276:25: warning: ignoring return value of 'fread' declared with attribute 'warn_unused_result' [-Wunused-result] 276 | fread((unsigned char *)&msh->cod, WrdSiz, 1, msh->hdl); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:322:25: warning: ignoring return value of 'fscanf' declared with attribute 'warn_unused_result' [-Wunused-result] 322 | fscanf(msh->hdl, "%d", &msh->ver); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:341:25: warning: ignoring return value of 'fscanf' declared with attribute 'warn_unused_result' [-Wunused-result] 341 | fscanf(msh->hdl, "%d", &msh->dim); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c: In function 'ScaDblWrd': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:1224:9: warning: ignoring return value of 'fread' declared with attribute 'warn_unused_result' [-Wunused-result] 1224 | fread(wrd, WrdSiz, 2, msh->hdl); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c: In function 'ScaWrd': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:1200:9: warning: ignoring return value of 'fread' declared with attribute 'warn_unused_result' [-Wunused-result] 1200 | fread(wrd, WrdSiz, 1, msh->hdl); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c: In function 'ScaKwdHdr': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:1094:25: warning: ignoring return value of 'fscanf' declared with attribute 'warn_unused_result' [-Wunused-result] 1094 | fscanf(msh->hdl, "%d", &kwd->NmbLin); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:1105:25: warning: ignoring return value of 'fscanf' declared with attribute 'warn_unused_result' [-Wunused-result] 1105 | fscanf(msh->hdl, "%d", &kwd->NmbTyp); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:1108:33: warning: ignoring return value of 'fscanf' declared with attribute 'warn_unused_result' [-Wunused-result] 1108 | fscanf(msh->hdl, "%d", &kwd->TypTab[i]); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c: In function 'GmfGetLin': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:697:49: warning: ignoring return value of 'fscanf' declared with attribute 'warn_unused_result' [-Wunused-result] 697 | fscanf(msh->hdl, "%f", va_arg(VarArg, float *)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:699:49: warning: ignoring return value of 'fscanf' declared with attribute 'warn_unused_result' [-Wunused-result] 699 | fscanf(msh->hdl, "%d", &nb_repeat); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:702:57: warning: ignoring return value of 'fscanf' declared with attribute 'warn_unused_result' [-Wunused-result] 702 | fscanf(msh->hdl, "%d", va_arg(VarArg, int *)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:705:49: warning: ignoring return value of 'fscanf' declared with attribute 'warn_unused_result' [-Wunused-result] 705 | fscanf(msh->hdl, "%d", va_arg(VarArg, int *)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:728:49: warning: ignoring return value of 'fscanf' declared with attribute 'warn_unused_result' [-Wunused-result] 728 | fscanf(msh->hdl, "%lf", va_arg(VarArg, double *)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:730:49: warning: ignoring return value of 'fscanf' declared with attribute 'warn_unused_result' [-Wunused-result] 730 | fscanf(msh->hdl, "%d", &nb_repeat); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:733:57: warning: ignoring return value of 'fscanf' declared with attribute 'warn_unused_result' [-Wunused-result] 733 | fscanf(msh->hdl, "%d", va_arg(VarArg, int *)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:736:49: warning: ignoring return value of 'fscanf' declared with attribute 'warn_unused_result' [-Wunused-result] 736 | fscanf(msh->hdl, "%d", va_arg(VarArg, int *)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:760:41: warning: ignoring return value of 'fscanf' declared with attribute 'warn_unused_result' [-Wunused-result] 760 | fscanf(msh->hdl, "%f", &FltSolTab[j]); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:770:41: warning: ignoring return value of 'fscanf' declared with attribute 'warn_unused_result' [-Wunused-result] 770 | fscanf(msh->hdl, "%lf", &DblSolTab[j]); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c: In function 'ScaBlk': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:1247:9: warning: ignoring return value of 'fread' declared with attribute 'warn_unused_result' [-Wunused-result] 1247 | fread(blk, WrdSiz, siz, msh->hdl); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c: In function 'GmfCpyLin': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:937:41: warning: ignoring return value of 'fscanf' declared with attribute 'warn_unused_result' [-Wunused-result] 937 | fscanf(InpMsh->hdl, "%f", &f); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:946:41: warning: ignoring return value of 'fscanf' declared with attribute 'warn_unused_result' [-Wunused-result] 946 | fscanf(InpMsh->hdl, "%lf", &d); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:969:33: warning: ignoring return value of 'fscanf' declared with attribute 'warn_unused_result' [-Wunused-result] 969 | fscanf(InpMsh->hdl, "%d", &a); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:982:41: warning: ignoring return value of 'fscanf' declared with attribute 'warn_unused_result' [-Wunused-result] 982 | fscanf(InpMsh->hdl, "%d", &a); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/libmesh.c:995:33: warning: ignoring return value of 'fscanf' declared with attribute 'warn_unused_result' [-Wunused-result] 995 | fscanf(InpMsh->hdl, "%d", &a); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 34%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/DocumentObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/DocumentObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.cpp : warning: ISO C++11 requires whitespace after the macro name [ 34%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/Extension.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/Extension.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Extension.cpp : warning: ISO C++11 requires whitespace after the macro name [ 34%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/ExtensionPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/ExtensionPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/ExtensionPyImp.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_Pattern.cpp: In function 'gp_XY project(const SMDS_MeshNode*, Extrema_GenExtPS&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_Pattern.cpp:509:22: warning: 'v' may be used uninitialized in this function [-Wmaybe-uninitialized] 509 | return gp_XY( u, v ); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_Pattern.cpp:509:22: warning: 'u' may be used uninitialized in this function [-Wmaybe-uninitialized] : warning: ISO C++11 requires whitespace after the macro name In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/ExtensionPyImp.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/ExtensionPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/ExtensionPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MesherHelper.cpp: In member function 'const SMDS_MeshNode* SMESH_MesherHelper::GetMediumNode(const SMDS_MeshNode*, const SMDS_MeshNode*, bool, TopAbs_ShapeEnum)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MesherHelper.cpp:1742:25: warning: 'u[1]' may be used uninitialized in this function [-Wmaybe-uninitialized] 1742 | double U = ( u[0] + u[1] ) / 2.; | ~~~~~~~^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MesherHelper.cpp:1742:25: warning: 'u[0]' may be used uninitialized in this function [-Wmaybe-uninitialized] In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Extension.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 34%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/DocumentObjectExtension.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/DocumentObjectExtension.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectExtension.cpp : warning: ISO C++11 requires whitespace after the macro name [ 34%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/DocumentObjectExtensionPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/DocumentObjectExtensionPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectExtensionPyImp.cpp : warning: ISO C++11 requires whitespace after the macro name /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 34%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/ExtensionContainer.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/ExtensionContainer.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/ExtensionContainer.cpp : warning: ISO C++11 requires whitespace after the macro name In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectExtension.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/DocumentObjectExtensionPy.h:8, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectExtensionPyImp.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 34%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/ExtensionContainerPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/ExtensionContainerPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/ExtensionContainerPyImp.cpp : warning: ISO C++11 requires whitespace after the macro name [ 34%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/GroupExtension.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/GroupExtension.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GroupExtension.cpp : warning: ISO C++11 requires whitespace after the macro name In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectExtensionPyImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/DocumentObjectExtensionPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/DocumentObjectExtensionPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 34%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/GroupExtensionPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/GroupExtensionPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GroupExtensionPyImp.cpp : warning: ISO C++11 requires whitespace after the macro name In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/ExtensionContainer.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 34%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/DocumentObjectFileIncluded.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/DocumentObjectFileIncluded.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectFileIncluded.cpp : warning: ISO C++11 requires whitespace after the macro name [ 34%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/DocumentObjectGroup.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/DocumentObjectGroup.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectGroup.cpp : warning: ISO C++11 requires whitespace after the macro name /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp: In member function 'void SMESH_MeshEditor::InsertNodesIntoLink(const SMDS_MeshElement*, const SMDS_MeshNode*, const SMDS_MeshNode*, std::__cxx11::list&, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp:9031:81: warning: 'iBestQuad' may be used uninitialized in this function [-Wmaybe-uninitialized] 9031 | nodes[ iSplit < iBestQuad ? i4 : i3 ])); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc/SMDS_Mesh.hxx:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc/SMESHDS_Mesh.hxx:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc/SMESH_Mesh.hxx:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc/SMESH_MeshEditor.hxx:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp:27: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc/SMDS_MeshInfo.hxx: In member function 'void SMESH_MeshEditor::DoubleElements(const TIDSortedElemSet&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc/SMDS_MeshInfo.hxx:298:3: warning: 'type' may be used uninitialized in this function [-Wmaybe-uninitialized] 298 | switch (type) { | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp:10619:23: note: 'type' was declared here 10619 | SMDSAbs_ElementType type; | ^~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectGroup.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GroupExtension.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/ExtensionContainerPyImp.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp: In member function 'SMESH_MeshEditor::Sew_Error SMESH_MeshEditor::SewFreeBorder(const SMDS_MeshNode*, const SMDS_MeshNode*, const SMDS_MeshNode*, const SMDS_MeshNode*, const SMDS_MeshNode*, const SMDS_MeshNode*, bool, bool, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp:8436:13: warning: 'iPrevNode' may be used uninitialized in this function [-Wmaybe-uninitialized] 8436 | int iPrevNode, iNode = 0, nbNodes = elem->NbNodes(); | ^~~~~~~~~ [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/DocumentObjectGroupPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/DocumentObjectGroupPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectGroupPyImp.cpp : warning: ISO C++11 requires whitespace after the macro name In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectGroup.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GroupExtensionPyImp.cpp:26: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp: In member function 'bool SMESH_MeshEditor::TriToQuad(TIDSortedElemSet&, SMESH::Controls::NumericalFunctorPtr, double)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp:3331:21: warning: 'link13' may be used uninitialized in this function [-Wmaybe-uninitialized] 3331 | linkNode2 = link13->second; | ~~~~~~~~~~^~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp:3325:21: warning: 'link12' may be used uninitialized in this function [-Wmaybe-uninitialized] 3325 | linkNode2 = link12->second; | ~~~~~~~~~~^~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectFileIncluded.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectFileIncluded.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/ExtensionContainerPyImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/ExtensionContainerPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/ExtensionContainerPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectGroup.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectGroup.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/GeoFeaturePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/GeoFeaturePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeaturePyImp.cpp : warning: ISO C++11 requires whitespace after the macro name In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GroupExtensionPyImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/GroupExtensionPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/GroupExtensionPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:117, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectGroup.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl: In instantiation of 'PyTypeObject App::FeaturePythonPyT::Type': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:99:68: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 29 | PyTypeObject FeaturePythonPyT::Type = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/DocumentObjectPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/DocumentObjectPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectPyImp.cpp : warning: ISO C++11 requires whitespace after the macro name [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/DocumentObserver.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/DocumentObserver.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObserver.cpp : warning: ISO C++11 requires whitespace after the macro name [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/DocumentObserverPython.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/DocumentObserverPython.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObserverPython.cpp : warning: ISO C++11 requires whitespace after the macro name In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectGroup.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectGroupPyImp.cpp:26: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/DocumentPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/DocumentPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentPyImp.cpp : warning: ISO C++11 requires whitespace after the macro name In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObserver.cpp:30: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.cpp: In member function 'void App::Document::exportGraphviz(std::ostream&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.cpp:752:48: warning: '*((void*)& ei +48)' may be used uninitialized in this function [-Wmaybe-uninitialized] 752 | graph_traits::edge_iterator ei, ei_end; | ^~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeaturePyImp.cpp:26: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectGroupPyImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/DocumentObjectGroupPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/DocumentObjectGroupPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectPyImp.cpp:25: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeaturePyImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/GeoFeaturePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/GeoFeaturePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/Expression.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/Expression.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.cpp : warning: ISO C++11 requires whitespace after the macro name /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp: In member function 'void SMESH_MeshEditor::QuadTo4Tri(TIDSortedElemSet&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp:1604:35: warning: 'subMeshDS' may be used uninitialized in this function [-Wmaybe-uninitialized] 1604 | GetMeshDS()->RemoveFreeElement( quad, subMeshDS, /*fromGroups=*/false ); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObserverPython.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectPyImp.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/DocumentObjectPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/DocumentObjectPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentPyImp.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/FeaturePython.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/FeaturePython.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.cpp : warning: ISO C++11 requires whitespace after the macro name /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp: In member function 'void SMESH_MeshEditor::Smooth(TIDSortedElemSet&, std::set&, SMESH_MeshEditor::SmoothMethod, int, double, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp:4161:25: warning: 'v' may be used uninitialized in this function [-Wmaybe-uninitialized] 4161 | newUV.SetY( ElCLib::InPeriod( newUV.Y(), v1, v2 )); | ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp:4159:25: warning: 'u' may be used uninitialized in this function [-Wmaybe-uninitialized] 4159 | newUV.SetX( ElCLib::InPeriod( newUV.X(), u1, u2 )); | ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentPyImp.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/DocumentPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/DocumentPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/FeatureTest.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/FeatureTest.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeatureTest.cpp : warning: ISO C++11 requires whitespace after the macro name In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/GeoFeature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/GeoFeature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.cpp : warning: ISO C++11 requires whitespace after the macro name In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 35%] Linking CXX shared library ../../../lib/libSMESH.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/cmake -E cmake_link_script CMakeFiles/SMESH.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,libSMESH.so -o ../../../lib/libSMESH.so CMakeFiles/SMESH.dir/src/Controls/SMESH_Controls.cpp.o CMakeFiles/SMESH.dir/src/SMESH/DriverGMF.cpp.o CMakeFiles/SMESH.dir/src/SMESH/DriverGMF_Read.cpp.o CMakeFiles/SMESH.dir/src/SMESH/DriverGMF_Write.cpp.o CMakeFiles/SMESH.dir/src/SMESH/DriverMED_Family.cpp.o CMakeFiles/SMESH.dir/src/SMESH/DriverMED_R_SMESHDS_Mesh.cpp.o CMakeFiles/SMESH.dir/src/SMESH/DriverMED_W_Field.cpp.o CMakeFiles/SMESH.dir/src/SMESH/DriverMED_W_SMESHDS_Mesh.cpp.o CMakeFiles/SMESH.dir/src/SMESH/GEOMUtils.cpp.o CMakeFiles/SMESH.dir/src/SMESH/MED_Algorithm.cpp.o CMakeFiles/SMESH.dir/src/SMESH/MED_CoordUtils.cpp.o CMakeFiles/SMESH.dir/src/SMESH/MED_Factory.cpp.o CMakeFiles/SMESH.dir/src/SMESH/MED_GaussDef.cpp.o CMakeFiles/SMESH.dir/src/SMESH/MED_GaussUtils.cpp.o CMakeFiles/SMESH.dir/src/SMESH/MED_Structures.cpp.o CMakeFiles/SMESH.dir/src/SMESH/MED_Utilities.cpp.o CMakeFiles/SMESH.dir/src/SMESH/MED_V2_2_Wrapper.cpp.o CMakeFiles/SMESH.dir/src/SMESH/MED_Wrapper.cpp.o CMakeFiles/SMESH.dir/src/SMESH/SMESH_Algo.cpp.o CMakeFiles/SMESH.dir/src/SMESH/SMESH_Block.cpp.o CMakeFiles/SMESH.dir/src/SMESH/SMESH_Exception.cpp.o CMakeFiles/SMESH.dir/src/SMESH/SMESH_Gen.cpp.o CMakeFiles/SMESH.dir/src/SMESH/SMESH_Group.cpp.o CMakeFiles/SMESH.dir/src/SMESH/SMESH_HypoFilter.cpp.o CMakeFiles/SMESH.dir/src/SMESH/SMESH_Hypothesis.cpp.o CMakeFiles/SMESH.dir/src/SMESH/SMESH_Mesh.cpp.o CMakeFiles/SMESH.dir/src/SMESH/SMESH_MeshAlgos.cpp.o CMakeFiles/SMESH.dir/src/SMESH/SMESH_MeshEditor.cpp.o CMakeFiles/SMESH.dir/src/SMESH/SMESH_MeshVSLink.cpp.o CMakeFiles/SMESH.dir/src/SMESH/SMESH_MesherHelper.cpp.o CMakeFiles/SMESH.dir/src/SMESH/SMESH_Octree.cpp.o CMakeFiles/SMESH.dir/src/SMESH/SMESH_OctreeNode.cpp.o CMakeFiles/SMESH.dir/src/SMESH/SMESH_Pattern.cpp.o CMakeFiles/SMESH.dir/src/SMESH/SMESH_ProxyMesh.cpp.o CMakeFiles/SMESH.dir/src/SMESH/SMESH_TryCatch.cpp.o CMakeFiles/SMESH.dir/src/SMESH/SMESH_subMesh.cpp.o CMakeFiles/SMESH.dir/src/SMESH/Utils_ExceptHandlers.cpp.o CMakeFiles/SMESH.dir/src/SMESH/libmesh.c.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../lib/libDriverSTL.so ../../../lib/libDriverDAT.so ../../../lib/libDriverUNV.so /usr/lib64/libmedC.so /usr/lib64/libmed.so /usr/lib64/libdouble-conversion.so /usr/lib64/liblz4.so /usr/lib64/liblzma.so /usr/lib64/libz.so /usr/lib64/libexpat.so /usr/lib64/libjpeg.so /usr/lib64/libpng.so /usr/lib64/libtiff.so /usr/lib64/libnetcdf.so /usr/lib64/libhdf5.so /usr/lib64/libdl.so /usr/lib64/libm.so /usr/lib64/libhdf5_hl.so /usr/lib64/libjsoncpp.so /usr/lib64/libfreetype.so /usr/lib64/libGLEW.so ../../../lib/libSMESHDS.so ../../../lib/libSMDS.so /usr/lib64/libvtkFiltersVerdict-8.2.so.1 /usr/lib64/libvtkverdict-8.2.so.1 /usr/lib64/libvtkIOMPIParallel-8.2.so.1 /usr/lib64/libvtkIOParallel-8.2.so.1 /usr/lib64/libvtkIOGeometry-8.2.so.1 /usr/lib64/libvtkIOImage-8.2.so.1 /usr/lib64/libvtkDICOMParser-8.2.so.1 /usr/lib64/libvtkmetaio-8.2.so.1 /usr/lib64/libvtkIONetCDF-8.2.so.1 /usr/lib64/libvtkexodusII-8.2.so.1 /usr/lib64/libvtkFiltersParallelDIY2-8.2.so.1 /usr/lib64/libvtkIOXML-8.2.so.1 /usr/lib64/libvtkIOXMLParser-8.2.so.1 /usr/lib64/libvtkFiltersParallel-8.2.so.1 /usr/lib64/libvtkFiltersModeling-8.2.so.1 /usr/lib64/libvtkParallelMPI-8.2.so.1 /usr/lib64/libvtkParallelCore-8.2.so.1 /usr/lib64/libvtkIOLegacy-8.2.so.1 /usr/lib64/libvtkIOCore-8.2.so.1 /usr/lib64/libvtkInteractionStyle-8.2.so.1 /usr/lib64/libvtkFiltersExtraction-8.2.so.1 /usr/lib64/libvtkFiltersStatistics-8.2.so.1 /usr/lib64/libvtkImagingFourier-8.2.so.1 /usr/lib64/libvtkImagingCore-8.2.so.1 /usr/lib64/libvtkRenderingFreeType-8.2.so.1 /usr/lib64/libvtkRenderingOpenGL2-8.2.so.1 /usr/lib64/libvtkRenderingCore-8.2.so.1 /usr/lib64/libvtkFiltersSources-8.2.so.1 /usr/lib64/libvtkFiltersGeneral-8.2.so.1 /usr/lib64/libvtkCommonComputationalGeometry-8.2.so.1 /usr/lib64/libvtkFiltersGeometry-8.2.so.1 /usr/lib64/libvtkFiltersCore-8.2.so.1 /usr/lib64/libvtkCommonExecutionModel-8.2.so.1 /usr/lib64/libvtkCommonColor-8.2.so.1 /usr/lib64/libvtkCommonDataModel-8.2.so.1 /usr/lib64/libvtkCommonMisc-8.2.so.1 /usr/lib64/libvtkCommonSystem-8.2.so.1 /usr/lib64/libvtkCommonTransforms-8.2.so.1 /usr/lib64/libvtkCommonMath-8.2.so.1 /usr/lib64/libvtkCommonCore-8.2.so.1 /usr/lib64/libvtksys-8.2.so.1 /usr/lib64/libSM.so /usr/lib64/libICE.so /usr/lib64/libX11.so /usr/lib64/libXext.so /usr/lib64/libXt.so /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread ../../../lib/libDriver.so -lmpi_cxx -lmpi /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKXDESTEP.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXDEIGES.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKXCAF.so.7.4.1 /usr/lib64/libTKVCAF.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKMeshVS.so.7.4.1 /usr/lib64/libTKV3d.so.7.4.1 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKService.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so -lfontconfig -lGL -lX11 -lXext -lXmu -lXi /usr/lib64/libdouble-conversion.so /usr/lib64/liblz4.so /usr/lib64/liblzma.so /usr/lib64/libz.so /usr/lib64/libexpat.so /usr/lib64/libjpeg.so /usr/lib64/libpng.so /usr/lib64/libtiff.so /usr/lib64/libnetcdf.so /usr/lib64/libhdf5.so /usr/lib64/libdl.so /usr/lib64/libm.so /usr/lib64/libhdf5_hl.so /usr/lib64/libjsoncpp.so /usr/lib64/libfreetype.so /usr/lib64/libGLEW.so [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/GeoFeatureGroupExtensionPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/GeoFeatureGroupExtensionPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtensionPyImp.cpp : warning: ISO C++11 requires whitespace after the macro name [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/GeoFeatureGroupExtension.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/GeoFeatureGroupExtension.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.cpp : warning: ISO C++11 requires whitespace after the macro name In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:117, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl: In instantiation of 'PyTypeObject App::FeaturePythonPyT::Type': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:99:68: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 29 | PyTypeObject FeaturePythonPyT::Type = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeatureTest.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeatureTest.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 35%] Built target SMESH [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/OriginGroupExtensionPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/OriginGroupExtensionPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtensionPyImp.cpp : warning: ISO C++11 requires whitespace after the macro name /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/depend.internal". Scanning dependencies of target StdMeshers gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/build.make src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 35%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/SMESH_MAT2d.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/SMESH_MAT2d.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/SMESH_MAT2d.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtensionPyImp.cpp:27: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/OriginGroupExtension.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/OriginGroupExtension.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtension.cpp : warning: ISO C++11 requires whitespace after the macro name In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/PartPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/PartPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PartPyImp.cpp : warning: ISO C++11 requires whitespace after the macro name In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtensionPyImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/GeoFeatureGroupExtensionPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/GeoFeatureGroupExtensionPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/Part.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/Part.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Part.cpp : warning: ISO C++11 requires whitespace after the macro name In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtension.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtensionPyImp.cpp:26: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/Origin.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/Origin.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Origin.cpp : warning: ISO C++11 requires whitespace after the macro name In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtensionPyImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/OriginGroupExtensionPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/OriginGroupExtensionPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/Path.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/Path.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Path.cpp : warning: ISO C++11 requires whitespace after the macro name [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/InventorObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/InventorObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/InventorObject.cpp : warning: ISO C++11 requires whitespace after the macro name In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtension.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtension.cpp:24: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtension.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Part.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PartPyImp.cpp:26: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/MeasureDistance.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/MeasureDistance.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/MeasureDistance.cpp : warning: ISO C++11 requires whitespace after the macro name [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/Placement.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/Placement.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Placement.cpp : warning: ISO C++11 requires whitespace after the macro name In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Part.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PartPyImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/PartPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/PartPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Origin.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 35%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/SMESH_Quadtree.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/SMESH_Quadtree.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/SMESH_Quadtree.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/InventorObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/InventorObject.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 35%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Adaptive1D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Adaptive1D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Adaptive1D.cpp [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/OriginFeature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/OriginFeature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginFeature.cpp : warning: ISO C++11 requires whitespace after the macro name In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Placement.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Placement.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/MeasureDistance.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/MeasureDistance.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/Range.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/Range.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Range.cpp : warning: ISO C++11 requires whitespace after the macro name [ 35%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Arithmetic1D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Arithmetic1D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Arithmetic1D.cpp [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/Transactions.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/Transactions.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Transactions.cpp : warning: ISO C++11 requires whitespace after the macro name [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/TransactionalObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/TransactionalObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/TransactionalObject.cpp : warning: ISO C++11 requires whitespace after the macro name [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/VRMLObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/VRMLObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/VRMLObject.cpp : warning: ISO C++11 requires whitespace after the macro name [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/MaterialObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/MaterialObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/MaterialObject.cpp : warning: ISO C++11 requires whitespace after the macro name [ 35%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_AutomaticLength.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_AutomaticLength.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_AutomaticLength.cpp In file included from /usr/include/opencascade/gp_XYZ.hxx:351, from /usr/include/opencascade/gp_Trsf.hxx:20, from /usr/include/opencascade/TopLoc_ItemLocation.hxx:26, from /usr/include/opencascade/TopLoc_Location.lxx:18, from /usr/include/opencascade/TopLoc_Location.hxx:170, from /usr/include/opencascade/TopoDS_Shape.hxx:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc/SMESH_Algo.hxx:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc/StdMeshers_Regular_1D.hxx:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc/StdMeshers_Adaptive1D.hxx:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Adaptive1D.cpp:25: /usr/include/opencascade/gp_XYZ.lxx: In member function 'void {anonymous}::TriaTreeData::SetSizeByTrias({anonymous}::SegSizeTree&, double) const': /usr/include/opencascade/gp_XYZ.lxx:196:39: warning: 'jLongest' may be used uninitialized in this function [-Wmaybe-uninitialized] 196 | return gp_XYZ(x * Scalar,y * Scalar,z * Scalar); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Adaptive1D.cpp:445:12: note: 'jLongest' was declared here 445 | int jLongest; | ^~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginFeature.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/MergeDocuments.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/MergeDocuments.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/MergeDocuments.cpp : warning: ISO C++11 requires whitespace after the macro name [ 35%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_CartesianParameters3D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_CartesianParameters3D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_CartesianParameters3D.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/MergeDocuments.cpp:26: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Transactions.cpp:37: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/TextDocument.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/TextDocument.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/TextDocument.cpp : warning: ISO C++11 requires whitespace after the macro name [ 35%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Cartesian_3D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Cartesian_3D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Cartesian_3D.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/VRMLObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/VRMLObject.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/MaterialObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/MaterialObject.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/DynamicProperty.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/DynamicProperty.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DynamicProperty.cpp : warning: ISO C++11 requires whitespace after the macro name /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 35%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_CompositeHexa_3D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_CompositeHexa_3D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_CompositeHexa_3D.cpp [ 35%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_CompositeSegment_1D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_CompositeSegment_1D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_CompositeSegment_1D.cpp [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/ObjectIdentifier.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/ObjectIdentifier.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/ObjectIdentifier.cpp : warning: ISO C++11 requires whitespace after the macro name /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Cartesian_3D.cpp:1357:8: warning: 'bool {anonymous}::FaceGridIntersector::IsThreadSafe(std::set&) const' defined but not used [-Wunused-function] 1357 | bool FaceGridIntersector::IsThreadSafe(set< const Standard_Transient* >& noSafeTShapes) const | ^~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/TextDocument.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/Property.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/Property.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Property.cpp : warning: ISO C++11 requires whitespace after the macro name /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_CompositeHexa_3D.cpp: In member function 'bool _QuadFaceGrid::Init(const TopoDS_Face&, SMESH_Mesh&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_CompositeHexa_3D.cpp:831:30: warning: implicitly-declared '_FaceSide& _FaceSide::operator=(const _FaceSide&)' is deprecated [-Wdeprecated-copy] 831 | mySides = _FaceSide(); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_CompositeHexa_3D.cpp:102:3: note: because '_FaceSide' has user-provided '_FaceSide::_FaceSide(const _FaceSide&)' 102 | _FaceSide(const _FaceSide& other); | ^~~~~~~~~ [ 35%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Deflection1D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Deflection1D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Deflection1D.cpp [ 35%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/PropertyContainer.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/PropertyContainer.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyContainer.cpp : warning: ISO C++11 requires whitespace after the macro name In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/ObjectIdentifier.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 36%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/PropertyContainerPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/PropertyContainerPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyContainerPyImp.cpp : warning: ISO C++11 requires whitespace after the macro name [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Distribution.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Distribution.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Distribution.cpp [ 37%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/PropertyFile.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/PropertyFile.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyFile.cpp : warning: ISO C++11 requires whitespace after the macro name [ 37%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/PropertyGeo.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/PropertyGeo.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyGeo.cpp : warning: ISO C++11 requires whitespace after the macro name [ 37%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/PropertyLinks.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/PropertyLinks.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyLinks.cpp : warning: ISO C++11 requires whitespace after the macro name [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_FaceSide.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_FaceSide.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_FaceSide.cpp [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_FixedPoints1D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_FixedPoints1D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_FixedPoints1D.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyContainerPyImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/PropertyContainerPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/PropertyContainerPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Geometric1D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Geometric1D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Geometric1D.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyLinks.cpp:38: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyFile.cpp:42: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_HexaFromSkin_3D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_HexaFromSkin_3D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_HexaFromSkin_3D.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyGeo.cpp:38: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Hexa_3D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Hexa_3D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Hexa_3D.cpp [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_ImportSource.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_ImportSource.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_ImportSource.cpp [ 37%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/PropertyPythonObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/PropertyPythonObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyPythonObject.cpp : warning: ISO C++11 requires whitespace after the macro name [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Import_1D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Import_1D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Import_1D.cpp [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Import_1D2D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Import_1D2D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Import_1D2D.cpp [ 37%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/PropertyStandard.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/PropertyStandard.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyStandard.cpp : warning: ISO C++11 requires whitespace after the macro name [ 37%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/PropertyUnits.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/PropertyUnits.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyUnits.cpp : warning: ISO C++11 requires whitespace after the macro name [ 37%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/PropertyExpressionEngine.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/PropertyExpressionEngine.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.cpp : warning: ISO C++11 requires whitespace after the macro name In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/DocumentObjectPy.h:8, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyPythonObject.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_LayerDistribution.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_LayerDistribution.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_LayerDistribution.cpp [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_LayerDistribution2D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_LayerDistribution2D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_LayerDistribution2D.cpp [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_LengthFromEdges.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_LengthFromEdges.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_LengthFromEdges.cpp [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_LocalLength.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_LocalLength.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_LocalLength.cpp [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_MEFISTO_2D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_MEFISTO_2D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_MEFISTO_2D.cpp [ 37%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/Application.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/Application.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.cpp : warning: ISO C++11 requires whitespace after the macro name [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_MaxElementArea.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_MaxElementArea.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_MaxElementArea.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.cpp:24: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_MaxElementVolume.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_MaxElementVolume.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_MaxElementVolume.cpp [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_MaxLength.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_MaxLength.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_MaxLength.cpp /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 37%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/ApplicationPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/ApplicationPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/ApplicationPy.cpp : warning: ISO C++11 requires whitespace after the macro name [ 37%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/Branding.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/Branding.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Branding.cpp : warning: ISO C++11 requires whitespace after the macro name [ 37%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/ColorModel.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/ColorModel.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/ColorModel.cpp : warning: ISO C++11 requires whitespace after the macro name [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_NotConformAllowed.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_NotConformAllowed.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_NotConformAllowed.cpp [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_NumberOfLayers.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_NumberOfLayers.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_NumberOfLayers.cpp [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_NumberOfLayers2D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_NumberOfLayers2D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_NumberOfLayers2D.cpp [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_NumberOfSegments.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_NumberOfSegments.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_NumberOfSegments.cpp [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Penta_3D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Penta_3D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Penta_3D.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/program_options/options_description.hpp:16, from /usr/include/boost/program_options.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.cpp:44: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 37%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/ComplexGeoData.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/ComplexGeoData.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/ComplexGeoData.cpp : warning: ISO C++11 requires whitespace after the macro name /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_PolygonPerFace_2D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_PolygonPerFace_2D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_PolygonPerFace_2D.cpp [ 37%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/ComplexGeoDataPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/ComplexGeoDataPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/ComplexGeoDataPyImp.cpp : warning: ISO C++11 requires whitespace after the macro name In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/ApplicationPy.cpp:34: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 37%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/Enumeration.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/Enumeration.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Enumeration.cpp : warning: ISO C++11 requires whitespace after the macro name [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Prism_3D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Prism_3D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Prism_3D.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/ComplexGeoDataPyImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/ComplexGeoDataPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/ComplexGeoDataPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 37%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/Material.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/Material.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Material.cpp : warning: ISO C++11 requires whitespace after the macro name [ 37%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/MaterialPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/MaterialPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/MaterialPyImp.cpp : warning: ISO C++11 requires whitespace after the macro name [ 37%] Building CXX object src/App/CMakeFiles/FreeCADApp.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDOCDIR=\"/usr/share/doc/freecad\" -DFreeCADApp_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRESOURCEDIR=\"/usr/share/freecad\" -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -DBOOST_1.75.0 -pthread -fPIC -o CMakeFiles/FreeCADApp.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PreCompiled.cpp : warning: ISO C++11 requires whitespace after the macro name [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_ProjectionSource1D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_ProjectionSource1D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_ProjectionSource1D.cpp [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_ProjectionSource2D.cpp.o [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_ProjectionSource3D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_ProjectionSource2D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_ProjectionSource2D.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_ProjectionSource3D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_ProjectionSource3D.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/MaterialPyImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/MaterialPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/MaterialPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_ProjectionUtils.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_ProjectionUtils.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_ProjectionUtils.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Penta_3D.cpp: In member function 'bool StdMeshers_Penta_3D::LoadIJNodes(StdMeshers_IJNodeMap&, const TopoDS_Face&, const TopoDS_Edge&, SMESHDS_Mesh*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Penta_3D.cpp:1503:5: warning: 'rev1' may be used uninitialized in this function [-Wmaybe-uninitialized] 1503 | if ( rev1 ) row--; | ^~ [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Projection_1D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Projection_1D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Projection_1D.cpp [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Projection_1D2D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Projection_1D2D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Projection_1D2D.cpp [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Projection_2D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Projection_2D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Projection_2D.cpp [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Projection_3D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Projection_3D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Projection_3D.cpp [ 37%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Propagation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Propagation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Propagation.cpp [ 38%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_QuadFromMedialAxis_1D2D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_QuadFromMedialAxis_1D2D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_QuadFromMedialAxis_1D2D.cpp [ 38%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_QuadToTriaAdaptor.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_QuadToTriaAdaptor.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_QuadToTriaAdaptor.cpp [ 38%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_QuadrangleParams.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_QuadrangleParams.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_QuadrangleParams.cpp [ 38%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_QuadranglePreference.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_QuadranglePreference.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_QuadranglePreference.cpp [ 38%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Quadrangle_2D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Quadrangle_2D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Quadrangle_2D.cpp [ 38%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_QuadraticMesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_QuadraticMesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_QuadraticMesh.cpp [ 38%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_RadialPrism_3D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_RadialPrism_3D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_RadialPrism_3D.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Prism_3D.cpp: In member function 'bool StdMeshers_Prism_3D::initPrism(Prism_3D::TPrismTopo&, const TopoDS_Shape&, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Prism_3D.cpp:3087:42: warning: 'minX' may be used uninitialized in this function [-Wmaybe-uninitialized] 3087 | if ( val < minVal || ( val == minVal && P.X() < minX )) { | ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~ [ 38%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_RadialQuadrangle_1D2D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_RadialQuadrangle_1D2D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_RadialQuadrangle_1D2D.cpp [ 38%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Regular_1D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Regular_1D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Regular_1D.cpp [ 38%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Reversible1D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Reversible1D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Reversible1D.cpp [ 38%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_SegmentAroundVertex_0D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_SegmentAroundVertex_0D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_SegmentAroundVertex_0D.cpp [ 38%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_SegmentLengthAroundVertex.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_SegmentLengthAroundVertex.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_SegmentLengthAroundVertex.cpp [ 38%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_StartEndLength.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_StartEndLength.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_StartEndLength.cpp [ 38%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_TrianglePreference.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_TrianglePreference.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_TrianglePreference.cpp [ 38%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_UseExisting_1D2D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_UseExisting_1D2D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_UseExisting_1D2D.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Quadrangle_2D.cpp: In member function 'bool StdMeshers_Quadrangle_2D::computeQuadDominant(SMESH_Mesh&, const TopoDS_Face&, FaceQuadStruct::Ptr)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Quadrangle_2D.cpp:763:26: warning: 'c' may be used uninitialized in this function [-Wmaybe-uninitialized] 763 | myHelper->AddFace(a, b, c); | ~~~~~~~~~~~~~~~~~^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Quadrangle_2D.cpp:559:26: warning: 'c' may be used uninitialized in this function [-Wmaybe-uninitialized] 559 | myHelper->AddFace(a, b, c); | ~~~~~~~~~~~~~~~~~^~~~~~~~~ [ 38%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_ViscousLayers.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_ViscousLayers.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_ViscousLayers.cpp [ 38%] Building CXX object src/3rdParty/salomesmesh/CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_ViscousLayers2D.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DLIN -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DStdMeshers_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/SMDS -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/Driver -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverUNV -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverDAT -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/DriverSTL -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh -I/usr/include/opencascade -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -I/usr/include/med -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -fPIC -pthread -o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_ViscousLayers2D.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_ViscousLayers2D.cpp [ 38%] Linking CXX shared library ../../lib/libFreeCADApp.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/FreeCADApp.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,libFreeCADApp.so -o ../../lib/libFreeCADApp.so CMakeFiles/FreeCADApp.dir/Annotation.cpp.o CMakeFiles/FreeCADApp.dir/Document.cpp.o CMakeFiles/FreeCADApp.dir/DocumentObject.cpp.o CMakeFiles/FreeCADApp.dir/Extension.cpp.o CMakeFiles/FreeCADApp.dir/ExtensionPyImp.cpp.o CMakeFiles/FreeCADApp.dir/DocumentObjectExtension.cpp.o CMakeFiles/FreeCADApp.dir/DocumentObjectExtensionPyImp.cpp.o CMakeFiles/FreeCADApp.dir/ExtensionContainer.cpp.o CMakeFiles/FreeCADApp.dir/ExtensionContainerPyImp.cpp.o CMakeFiles/FreeCADApp.dir/GroupExtension.cpp.o CMakeFiles/FreeCADApp.dir/GroupExtensionPyImp.cpp.o CMakeFiles/FreeCADApp.dir/DocumentObjectFileIncluded.cpp.o CMakeFiles/FreeCADApp.dir/DocumentObjectGroup.cpp.o CMakeFiles/FreeCADApp.dir/DocumentObjectGroupPyImp.cpp.o CMakeFiles/FreeCADApp.dir/GeoFeaturePyImp.cpp.o CMakeFiles/FreeCADApp.dir/DocumentObjectPyImp.cpp.o CMakeFiles/FreeCADApp.dir/DocumentObserver.cpp.o CMakeFiles/FreeCADApp.dir/DocumentObserverPython.cpp.o CMakeFiles/FreeCADApp.dir/DocumentPyImp.cpp.o CMakeFiles/FreeCADApp.dir/Expression.cpp.o CMakeFiles/FreeCADApp.dir/FeaturePython.cpp.o CMakeFiles/FreeCADApp.dir/FeatureTest.cpp.o CMakeFiles/FreeCADApp.dir/GeoFeature.cpp.o CMakeFiles/FreeCADApp.dir/GeoFeatureGroupExtensionPyImp.cpp.o CMakeFiles/FreeCADApp.dir/GeoFeatureGroupExtension.cpp.o CMakeFiles/FreeCADApp.dir/OriginGroupExtensionPyImp.cpp.o CMakeFiles/FreeCADApp.dir/OriginGroupExtension.cpp.o CMakeFiles/FreeCADApp.dir/PartPyImp.cpp.o CMakeFiles/FreeCADApp.dir/Part.cpp.o CMakeFiles/FreeCADApp.dir/Origin.cpp.o CMakeFiles/FreeCADApp.dir/Path.cpp.o CMakeFiles/FreeCADApp.dir/InventorObject.cpp.o CMakeFiles/FreeCADApp.dir/MeasureDistance.cpp.o CMakeFiles/FreeCADApp.dir/Placement.cpp.o CMakeFiles/FreeCADApp.dir/OriginFeature.cpp.o CMakeFiles/FreeCADApp.dir/Range.cpp.o CMakeFiles/FreeCADApp.dir/Transactions.cpp.o CMakeFiles/FreeCADApp.dir/TransactionalObject.cpp.o CMakeFiles/FreeCADApp.dir/VRMLObject.cpp.o CMakeFiles/FreeCADApp.dir/MaterialObject.cpp.o CMakeFiles/FreeCADApp.dir/MergeDocuments.cpp.o CMakeFiles/FreeCADApp.dir/TextDocument.cpp.o CMakeFiles/FreeCADApp.dir/DynamicProperty.cpp.o CMakeFiles/FreeCADApp.dir/ObjectIdentifier.cpp.o CMakeFiles/FreeCADApp.dir/Property.cpp.o CMakeFiles/FreeCADApp.dir/PropertyContainer.cpp.o CMakeFiles/FreeCADApp.dir/PropertyContainerPyImp.cpp.o CMakeFiles/FreeCADApp.dir/PropertyFile.cpp.o CMakeFiles/FreeCADApp.dir/PropertyGeo.cpp.o CMakeFiles/FreeCADApp.dir/PropertyLinks.cpp.o CMakeFiles/FreeCADApp.dir/PropertyPythonObject.cpp.o CMakeFiles/FreeCADApp.dir/PropertyStandard.cpp.o CMakeFiles/FreeCADApp.dir/PropertyUnits.cpp.o CMakeFiles/FreeCADApp.dir/PropertyExpressionEngine.cpp.o CMakeFiles/FreeCADApp.dir/Application.cpp.o CMakeFiles/FreeCADApp.dir/ApplicationPy.cpp.o CMakeFiles/FreeCADApp.dir/Branding.cpp.o CMakeFiles/FreeCADApp.dir/ColorModel.cpp.o CMakeFiles/FreeCADApp.dir/ComplexGeoData.cpp.o CMakeFiles/FreeCADApp.dir/ComplexGeoDataPyImp.cpp.o CMakeFiles/FreeCADApp.dir/Enumeration.cpp.o CMakeFiles/FreeCADApp.dir/Material.cpp.o CMakeFiles/FreeCADApp.dir/MaterialPyImp.cpp.o CMakeFiles/FreeCADApp.dir/PreCompiled.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../lib/libFreeCADBase.so /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5Xml.so.5.15.2 -lmpi_cxx -lmpi -licudata -licui18n -licuuc -lpthread /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so -lpthread /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Core.so.5.15.2 gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 38%] Built target FreeCADApp /usr/bin/gmake -f src/Gui/CMakeFiles/FreeCADGui.dir/build.make src/Gui/CMakeFiles/FreeCADGui.dir/depend /usr/bin/gmake -f src/Main/CMakeFiles/FreeCADMainPy.dir/build.make src/Main/CMakeFiles/FreeCADMainPy.dir/depend /usr/bin/gmake -f src/Main/CMakeFiles/FreeCADMainCmd.dir/build.make src/Main/CMakeFiles/FreeCADMainCmd.dir/depend /usr/bin/gmake -f src/Mod/Points/App/CMakeFiles/Points.dir/build.make src/Mod/Points/App/CMakeFiles/Points.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Main /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main/CMakeFiles/FreeCADMainPy.dir/DependInfo.cmake --color= gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Main /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main/CMakeFiles/FreeCADMainCmd.dir/DependInfo.cmake --color= /usr/bin/gmake -f src/Mod/Image/App/CMakeFiles/Image.dir/build.make src/Mod/Image/App/CMakeFiles/Image.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main/CMakeFiles/FreeCADMainPy.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main/CMakeFiles/FreeCADMainPy.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main/CMakeFiles/FreeCADMainPy.dir/depend.internal". [ 38%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Points/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Points/Init.py gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main/CMakeFiles/FreeCADMainCmd.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main/CMakeFiles/FreeCADMainCmd.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main/CMakeFiles/FreeCADMainCmd.dir/depend.internal". gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/App/CMakeFiles/Image.dir/DependInfo.cmake --color= cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App/CMakeFiles/Points.dir/DependInfo.cmake --color= Scanning dependencies of target FreeCADMainPy Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/App/CMakeFiles/Image.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/App/CMakeFiles/Image.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/App/CMakeFiles/Image.dir/depend.internal". [ 38%] Generating ui_TextureMapping.h gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_TextureMapping.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.ui /usr/bin/gmake -f src/Main/CMakeFiles/FreeCADMainPy.dir/build.make src/Main/CMakeFiles/FreeCADMainPy.dir/build Scanning dependencies of target FreeCADMainCmd gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App/CMakeFiles/Points.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App/CMakeFiles/Points.dir/depend.internal". /usr/bin/gmake -f src/Main/CMakeFiles/FreeCADMainCmd.dir/build.make src/Main/CMakeFiles/FreeCADMainCmd.dir/build Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App/CMakeFiles/Points.dir/depend.internal". gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 38%] Building CXX object src/Main/CMakeFiles/FreeCADMainPy.dir/MainPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADMainPy_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADMainPy.dir/MainPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Main/MainPy.cpp [ 38%] Building CXX object src/Main/CMakeFiles/FreeCADMainCmd.dir/MainCmd.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -pthread -fPIC -o CMakeFiles/FreeCADMainCmd.dir/MainCmd.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Main/MainCmd.cpp [ 38%] Generating DAGView/moc_DAGModel.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView/moc_DAGModel.cpp_parameters Scanning dependencies of target Image gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Image/App/CMakeFiles/Image.dir/build.make src/Mod/Image/App/CMakeFiles/Image.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 38%] Building CXX object src/Mod/Image/App/CMakeFiles/Image.dir/ImageBase.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DImage_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Image.dir/ImageBase.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/App/ImageBase.cpp Scanning dependencies of target Points gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Points/App/CMakeFiles/Points.dir/build.make src/Mod/Points/App/CMakeFiles/Points.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 38%] Building CXX object src/Mod/Points/App/CMakeFiles/Points.dir/AppPoints.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPoints_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Points.dir/AppPoints.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App/AppPoints.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Quadrangle_2D.cpp: In member function 'bool StdMeshers_Quadrangle_2D::computeQuadPref(SMESH_Mesh&, const TopoDS_Face&, FaceQuadStruct::Ptr)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Quadrangle_2D.cpp:2407:18: warning: 'y1' may be used uninitialized in this function [-Wmaybe-uninitialized] 2407 | double yy1 = y1 + dy1*i; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Quadrangle_2D.cpp:2406:18: warning: 'y0' may be used uninitialized in this function [-Wmaybe-uninitialized] 2406 | double yy0 = y0 + dy0*i; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Quadrangle_2D.cpp:2284:16: warning: 'dr' may be used uninitialized in this function [-Wmaybe-uninitialized] 2284 | for (i=1; i<=dr+1; i++) | ~^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Quadrangle_2D.cpp:2279:16: warning: 'dl' may be used uninitialized in this function [-Wmaybe-uninitialized] 2279 | for (i=1; i<=dl+1; i++) | ~^~~~~~ [ 38%] Building CXX object src/Mod/Image/App/CMakeFiles/Image.dir/ImagePlane.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DImage_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Image.dir/ImagePlane.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/App/ImagePlane.cpp [ 38%] Generating DAGView/moc_DAGView.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView/moc_DAGView.cpp_parameters [ 38%] Linking CXX executable ../../bin/FreeCADCmd cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main && /usr/bin/cmake -E cmake_link_script CMakeFiles/FreeCADMainCmd.dir/link.txt --verbose=1 /usr/bin/c++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -rdynamic CMakeFiles/FreeCADMainCmd.dir/MainCmd.cpp.o -o ../../bin/FreeCADCmd -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../lib/libFreeCADApp.so /usr/lib64/libQt5Xml.so.5.15.2 ../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread -lpthread /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_ViscousLayers2D.cpp: In member function 'bool VISCOUS_2D::_ViscousBuilder2D::inflate()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_ViscousLayers2D.cpp:1455:48: warning: 'intersection.VISCOUS_2D::_SegmentIntersection::_param2' may be used uninitialized in this function [-Wmaybe-uninitialized] 1455 | L1._length2D *= intersection._param2 * 0.5; | ~~~~~~~~~~~~~~~~~~~~~^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_ViscousLayers2D.cpp:1454:48: warning: 'intersection.VISCOUS_2D::_SegmentIntersection::_param1' may be used uninitialized in this function [-Wmaybe-uninitialized] 1454 | L0._length2D *= intersection._param1 * 0.5; | ~~~~~~~~~~~~~~~~~~~~~^~~~~ [ 38%] Linking CXX shared library ../../lib/FreeCAD.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main && /usr/bin/cmake -E cmake_link_script CMakeFiles/FreeCADMainPy.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,FreeCAD.so -o ../../lib/FreeCAD.so CMakeFiles/FreeCADMainPy.dir/MainPy.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../lib/libFreeCADApp.so ../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread -lpthread /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_ViscousLayers2D.cpp: In member function 'void VISCOUS_2D::_ViscousBuilder2D::adjustCommonEdge(VISCOUS_2D::_PolyLine&, VISCOUS_2D::_PolyLine&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_ViscousLayers2D.cpp:1225:43: warning: 'lastIntersection.VISCOUS_2D::_SegmentIntersection::_param2' may be used uninitialized in this function [-Wmaybe-uninitialized] 1225 | newEdgeVec[1]._len2dTo3dRatio *= lastIntersection._param2; gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 38%] Built target FreeCADMainCmd /usr/bin/gmake -f src/Mod/Mesh/App/CMakeFiles/Mesh.dir/build.make src/Mod/Mesh/App/CMakeFiles/Mesh.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App/CMakeFiles/Mesh.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App/CMakeFiles/Mesh.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App/CMakeFiles/Mesh.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App/CMakeFiles/Mesh.dir/depend.internal". gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 38%] Built target FreeCADMainPy /usr/bin/gmake -f src/Mod/Part/App/CMakeFiles/Part.dir/build.make src/Mod/Part/App/CMakeFiles/Part.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/CMakeFiles/Part.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/CMakeFiles/Part.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/CMakeFiles/Part.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/CMakeFiles/Part.dir/depend.internal". In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App/PointsFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App/Structured.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App/AppPoints.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 38%] Building files out of FreeCADGuiInit.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/python3 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Tools/PythonToCPP.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FreeCADGuiInit.py GuiInitScript.h [ 38%] Generating Language/moc_Translator.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language/moc_Translator.cpp_parameters [ 38%] Generating QSint/actionpanel/moc_actionbox.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/QSint/actionpanel && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/QSint/actionpanel/moc_actionbox.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/App/ImagePlane.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/App/ImagePlane.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 38%] Generating QSint/actionpanel/moc_actiongroup.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/QSint/actionpanel && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/QSint/actionpanel/moc_actiongroup.cpp_parameters [ 38%] Generating QSint/actionpanel/moc_actionlabel.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/QSint/actionpanel && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/QSint/actionpanel/moc_actionlabel.cpp_parameters [ 38%] Generating QSint/actionpanel/moc_actionpanel.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/QSint/actionpanel && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/QSint/actionpanel/moc_actionpanel.cpp_parameters /usr/bin/gmake -f src/Mod/Spreadsheet/App/CMakeFiles/Spreadsheet.dir/build.make src/Mod/Spreadsheet/App/CMakeFiles/Spreadsheet.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/CMakeFiles/Spreadsheet.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/CMakeFiles/Spreadsheet.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/CMakeFiles/Spreadsheet.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/CMakeFiles/Spreadsheet.dir/depend.internal". Scanning dependencies of target Spreadsheet gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Spreadsheet/App/CMakeFiles/Spreadsheet.dir/build.make src/Mod/Spreadsheet/App/CMakeFiles/Spreadsheet.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 38%] Building CXX object src/Mod/Spreadsheet/App/CMakeFiles/Spreadsheet.dir/Cell.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSpreadsheet_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Spreadsheet.dir/Cell.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/Cell.cpp Scanning dependencies of target Mesh gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Mesh/App/CMakeFiles/Mesh.dir/build.make src/Mod/Mesh/App/CMakeFiles/Mesh.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 38%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/Algorithm.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/Algorithm.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Algorithm.cpp [ 38%] Generating QSint/actionpanel/moc_taskheader_p.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/QSint/actionpanel && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/QSint/actionpanel/moc_taskheader_p.cpp_parameters [ 38%] Generating Quarter/eventhandlers/moc_DragDropHandler.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/eventhandlers && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/eventhandlers/moc_DragDropHandler.cpp_parameters [ 38%] Generating Quarter/eventhandlers/moc_EventFilter.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/eventhandlers && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/eventhandlers/moc_EventFilter.cpp_parameters [ 38%] Generating Quarter/eventhandlers/moc_FocusHandler.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/eventhandlers && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/eventhandlers/moc_FocusHandler.cpp_parameters [ 38%] Generating Quarter/moc_ContextMenu.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/moc_ContextMenu.cpp_parameters [ 38%] Generating Quarter/moc_InteractionMode.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/moc_InteractionMode.cpp_parameters [ 38%] Generating Quarter/moc_QuarterWidget.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/moc_QuarterWidget.cpp_parameters Scanning dependencies of target Part gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Part/App/CMakeFiles/Part.dir/build.make src/Mod/Part/App/CMakeFiles/Part.dir/build [ 38%] Generating Quarter/moc_SensorManager.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/moc_SensorManager.cpp_parameters [ 38%] Generating Quarter/moc_SignalThread.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/moc_SignalThread.cpp_parameters [ 38%] Generating TaskView/moc_TaskAppearance.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView/moc_TaskAppearance.cpp_parameters gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 38%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeaturePartBoolean.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeaturePartBoolean.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartBoolean.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_ViscousLayers2D.cpp: In member function 'bool VISCOUS_2D::_ViscousBuilder2D::shrink()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_ViscousLayers2D.cpp:2010:51: warning: 'isRShrinkedForAdjacent' may be used uninitialized in this function [-Wmaybe-uninitialized] 2010 | nodeDataVec.insert(( isRShrinkedForAdjacent ? nodeDataVec.end() : nodeDataVec.begin() ), | ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 38%] Building CXX object src/Mod/Points/App/CMakeFiles/Points.dir/AppPointsPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPoints_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Points.dir/AppPointsPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App/AppPointsPy.cpp [ 38%] Building CXX object src/Mod/Image/App/CMakeFiles/Image.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DImage_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Image.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/App/PreCompiled.cpp [ 38%] Building CXX object src/Mod/Image/App/CMakeFiles/Image.dir/AppImage.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DImage_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Image.dir/AppImage.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/App/AppImage.cpp [ 38%] Building CXX object src/Mod/Points/App/CMakeFiles/Points.dir/Points.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPoints_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Points.dir/Points.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App/Points.cpp [ 38%] Generating TaskView/moc_TaskDialog.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView/moc_TaskDialog.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/Sheet.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/Cell.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 38%] Generating TaskView/moc_TaskEditControl.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView/moc_TaskEditControl.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartBoolean.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartBoolean.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/App/ImagePlane.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/App/AppImage.cpp:22: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App/AppPointsPy.cpp:37: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 38%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/Approximation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/Approximation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Approximation.cpp [ 38%] Generating TaskView/moc_TaskSelectLinkProperty.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView/moc_TaskSelectLinkProperty.cpp_parameters [ 38%] Building CXX object src/Mod/Points/App/CMakeFiles/Points.dir/PointsPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPoints_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Points.dir/PointsPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App/PointsPyImp.cpp [ 38%] Linking CXX shared library ../../../../Mod/Image/Image.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/Image.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,Image.so -o ../../../../Mod/Image/Image.so CMakeFiles/Image.dir/ImageBase.cpp.o CMakeFiles/Image.dir/ImagePlane.cpp.o CMakeFiles/Image.dir/PreCompiled.cpp.o CMakeFiles/Image.dir/AppImage.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread -lpthread /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 [ 38%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeaturePartBox.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeaturePartBox.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartBox.cpp [ 38%] Building CXX object src/Mod/Spreadsheet/App/CMakeFiles/Spreadsheet.dir/PropertySheet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSpreadsheet_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Spreadsheet.dir/PropertySheet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/PropertySheet.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 38%] Built target Image [ 38%] Building CXX object src/Mod/Points/App/CMakeFiles/Points.dir/PointsAlgos.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPoints_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Points.dir/PointsAlgos.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App/PointsAlgos.cpp [ 38%] Generating TaskView/moc_TaskView.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView/moc_TaskView.cpp_parameters [ 38%] Building CXX object src/Mod/Points/App/CMakeFiles/Points.dir/PointsFeature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPoints_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Points.dir/PointsFeature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App/PointsFeature.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App/PointsPyImp.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App/PointsPy.cpp:81:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 81 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App/PointsPy.cpp:81:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_ViscousLayers.cpp: In member function 'bool VISCOUS_3D::_ViscousBuilder::refine(VISCOUS_3D::_SolidData&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_ViscousLayers.cpp:6359:9: warning: 'isOnEdge' may be used uninitialized in this function [-Wmaybe-uninitialized] 6359 | if ( isOnEdge ) | ^~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_ViscousLayers.cpp:6321:41: warning: 'u' may be used uninitialized in this function [-Wmaybe-uninitialized] 6321 | getMeshDS()->SetNodeOnEdge( node, geomEdge, u ); | ~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/PropertySheet.cpp:31: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 38%] Generating TaskView/moc_TaskWatcher.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView/moc_TaskWatcher.cpp_parameters [ 38%] Generating iisTaskPanel/src/moc_iisiconlabel.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/iisTaskPanel/src && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/iisTaskPanel/src/moc_iisiconlabel.cpp_parameters [ 38%] Generating iisTaskPanel/src/moc_iistaskbox.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/iisTaskPanel/src && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/iisTaskPanel/src/moc_iistaskbox.cpp_parameters /usr/bin/gmake -f src/Mod/Web/App/CMakeFiles/Web.dir/build.make src/Mod/Web/App/CMakeFiles/Web.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 38%] Generating moc_Server.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/App && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/App/moc_Server.cpp_parameters cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/App/CMakeFiles/Web.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/App/CMakeFiles/Web.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/App/CMakeFiles/Web.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/App/CMakeFiles/Web.dir/depend.internal". Scanning dependencies of target Web gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Web/App/CMakeFiles/Web.dir/build.make src/Mod/Web/App/CMakeFiles/Web.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 38%] Building CXX object src/Mod/Web/App/CMakeFiles/Web.dir/AppWeb.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -DWeb_EXPORTS -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Web.dir/AppWeb.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/App/AppWeb.cpp [ 38%] Generating iisTaskPanel/src/moc_iistaskgroup.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/iisTaskPanel/src && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/iisTaskPanel/src/moc_iistaskgroup.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PrimitiveFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartBox.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartBox.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 38%] Generating iisTaskPanel/src/moc_iistaskheader.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/iisTaskPanel/src && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/iisTaskPanel/src/moc_iistaskheader.cpp_parameters /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 38%] Generating moc_Action.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_Action.cpp_parameters [ 38%] Generating moc_ActionFunction.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_ActionFunction.cpp_parameters [ 39%] Generating moc_Assistant.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_Assistant.cpp_parameters [ 39%] Generating moc_AutoSaver.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_AutoSaver.cpp_parameters [ 39%] Linking CXX shared library ../../../lib/libStdMeshers.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/3rdParty/salomesmesh && /usr/bin/cmake -E cmake_link_script CMakeFiles/StdMeshers.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,libStdMeshers.so -o ../../../lib/libStdMeshers.so CMakeFiles/StdMeshers.dir/src/StdMeshers/SMESH_MAT2d.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/SMESH_Quadtree.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Adaptive1D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Arithmetic1D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_AutomaticLength.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_CartesianParameters3D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Cartesian_3D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_CompositeHexa_3D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_CompositeSegment_1D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Deflection1D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Distribution.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_FaceSide.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_FixedPoints1D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Geometric1D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_HexaFromSkin_3D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Hexa_3D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_ImportSource.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Import_1D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Import_1D2D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_LayerDistribution.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_LayerDistribution2D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_LengthFromEdges.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_LocalLength.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_MEFISTO_2D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_MaxElementArea.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_MaxElementVolume.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_MaxLength.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_NotConformAllowed.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_NumberOfLayers.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_NumberOfLayers2D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_NumberOfSegments.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Penta_3D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_PolygonPerFace_2D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Prism_3D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_ProjectionSource1D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_ProjectionSource2D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_ProjectionSource3D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_ProjectionUtils.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Projection_1D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Projection_1D2D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Projection_2D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Projection_3D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Propagation.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_QuadFromMedialAxis_1D2D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_QuadToTriaAdaptor.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_QuadrangleParams.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_QuadranglePreference.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Quadrangle_2D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_QuadraticMesh.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_RadialPrism_3D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_RadialQuadrangle_1D2D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Regular_1D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_Reversible1D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_SegmentAroundVertex_0D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_SegmentLengthAroundVertex.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_StartEndLength.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_TrianglePreference.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_UseExisting_1D2D.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_ViscousLayers.cpp.o CMakeFiles/StdMeshers.dir/src/StdMeshers/StdMeshers_ViscousLayers2D.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../lib/libSMESH.so ../../../lib/libMEFISTO2.so ../../../lib/libDriverSTL.so ../../../lib/libDriverDAT.so ../../../lib/libDriverUNV.so ../../../lib/libSMESHDS.so ../../../lib/libSMDS.so /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread ../../../lib/libDriver.so /usr/lib64/libmedC.so /usr/lib64/libmed.so /usr/lib64/libvtkFiltersVerdict-8.2.so.1 /usr/lib64/libvtkverdict-8.2.so.1 /usr/lib64/libdouble-conversion.so /usr/lib64/liblz4.so /usr/lib64/liblzma.so /usr/lib64/libexpat.so /usr/lib64/libvtkIOMPIParallel-8.2.so.1 /usr/lib64/libjpeg.so /usr/lib64/libpng.so /usr/lib64/libtiff.so /usr/lib64/libvtkIOParallel-8.2.so.1 /usr/lib64/libvtkIOGeometry-8.2.so.1 /usr/lib64/libvtkIOImage-8.2.so.1 /usr/lib64/libvtkDICOMParser-8.2.so.1 /usr/lib64/libvtkmetaio-8.2.so.1 /usr/lib64/libz.so /usr/lib64/libvtkIONetCDF-8.2.so.1 /usr/lib64/libhdf5.so /usr/lib64/libdl.so /usr/lib64/libm.so /usr/lib64/libhdf5_hl.so /usr/lib64/libvtkexodusII-8.2.so.1 /usr/lib64/libnetcdf.so /usr/lib64/libjsoncpp.so /usr/lib64/libvtkFiltersParallelDIY2-8.2.so.1 /usr/lib64/libvtkIOXML-8.2.so.1 /usr/lib64/libvtkIOXMLParser-8.2.so.1 /usr/lib64/libvtkFiltersParallel-8.2.so.1 /usr/lib64/libvtkFiltersModeling-8.2.so.1 /usr/lib64/libvtkParallelMPI-8.2.so.1 /usr/lib64/libvtkParallelCore-8.2.so.1 /usr/lib64/libvtkIOLegacy-8.2.so.1 /usr/lib64/libvtkIOCore-8.2.so.1 /usr/lib64/libvtkInteractionStyle-8.2.so.1 /usr/lib64/libvtkFiltersExtraction-8.2.so.1 /usr/lib64/libvtkFiltersStatistics-8.2.so.1 /usr/lib64/libvtkImagingFourier-8.2.so.1 /usr/lib64/libvtkImagingCore-8.2.so.1 /usr/lib64/libvtkRenderingFreeType-8.2.so.1 /usr/lib64/libvtkRenderingOpenGL2-8.2.so.1 /usr/lib64/libvtkRenderingCore-8.2.so.1 /usr/lib64/libvtkFiltersSources-8.2.so.1 /usr/lib64/libvtkFiltersGeneral-8.2.so.1 /usr/lib64/libvtkCommonComputationalGeometry-8.2.so.1 /usr/lib64/libvtkFiltersGeometry-8.2.so.1 /usr/lib64/libvtkFiltersCore-8.2.so.1 /usr/lib64/libvtkCommonExecutionModel-8.2.so.1 /usr/lib64/libvtkCommonColor-8.2.so.1 /usr/lib64/libvtkCommonDataModel-8.2.so.1 /usr/lib64/libvtkCommonMisc-8.2.so.1 /usr/lib64/libvtkCommonSystem-8.2.so.1 /usr/lib64/libvtkCommonTransforms-8.2.so.1 /usr/lib64/libvtkCommonMath-8.2.so.1 /usr/lib64/libvtkCommonCore-8.2.so.1 /usr/lib64/libvtksys-8.2.so.1 /usr/lib64/libSM.so /usr/lib64/libICE.so /usr/lib64/libX11.so /usr/lib64/libXext.so /usr/lib64/libXt.so /usr/lib64/libGLEW.so -lmpi_cxx -lmpi /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKXDESTEP.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXDEIGES.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKXCAF.so.7.4.1 /usr/lib64/libTKVCAF.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKMeshVS.so.7.4.1 /usr/lib64/libTKV3d.so.7.4.1 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKService.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so -lfontconfig -lGL -lX11 -lXext -lXmu -lXi /usr/lib64/libfreetype.so In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App/PointsFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App/PointsFeature.cpp:37: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 39%] Generating moc_CallTips.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_CallTips.cpp_parameters [ 39%] Generating moc_Clipping.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_Clipping.cpp_parameters gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 39%] Built target StdMeshers /usr/bin/gmake -f src/Mod/Start/App/CMakeFiles/Start.dir/build.make src/Mod/Start/App/CMakeFiles/Start.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/App/CMakeFiles/Start.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/App/CMakeFiles/Start.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/App/CMakeFiles/Start.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/App/CMakeFiles/Start.dir/depend.internal". Scanning dependencies of target Start gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Start/App/CMakeFiles/Start.dir/build.make src/Mod/Start/App/CMakeFiles/Start.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 39%] Building CXX object src/Mod/Start/App/CMakeFiles/Start.dir/AppStart.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DStart_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Start.dir/AppStart.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/App/AppStart.cpp [ 39%] Building CXX object src/Mod/Web/App/CMakeFiles/Web.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -DWeb_EXPORTS -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Web.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/App/PreCompiled.cpp [ 39%] Building CXX object src/Mod/Web/App/CMakeFiles/Web.dir/Server.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -DWeb_EXPORTS -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Web.dir/Server.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/App/Server.cpp [ 39%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeaturePartCircle.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeaturePartCircle.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartCircle.cpp [ 39%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeaturePartCommon.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeaturePartCommon.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartCommon.cpp [ 39%] Building CXX object src/Mod/Start/App/CMakeFiles/Start.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DStart_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Start.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/App/PreCompiled.cpp [ 39%] Linking CXX shared library ../../../../Mod/Start/Start.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/Start.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,Start.so -o ../../../../Mod/Start/Start.so CMakeFiles/Start.dir/AppStart.cpp.o CMakeFiles/Start.dir/PreCompiled.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread -lpthread /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 39%] Built target Start [ 39%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeaturePartCurveNet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeaturePartCurveNet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartCurveNet.cpp [ 39%] Generating moc_CombiView.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_CombiView.cpp_parameters [ 39%] Linking CXX shared library ../../../../Mod/Web/Web.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/Web.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,Web.so -o ../../../../Mod/Web/Web.so CMakeFiles/Web.dir/AppWeb.cpp.o CMakeFiles/Web.dir/PreCompiled.cpp.o CMakeFiles/Web.dir/Server.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../lib/libFreeCADApp.so /usr/lib64/libQt5Network.so.5.15.2 ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread -lpthread /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 39%] Built target Web [ 39%] Generating moc_Control.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_Control.cpp_parameters [ 39%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeaturePartCut.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeaturePartCut.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartCut.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartBoolean.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartCommon.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartCommon.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartCurveNet.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartCurveNet.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 39%] Generating moc_DemoMode.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DemoMode.cpp_parameters [ 39%] Generating moc_DlgActionsImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgActionsImp.cpp_parameters [ 40%] Generating moc_DlgActivateWindowImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgActivateWindowImp.cpp_parameters [ 40%] Generating moc_DlgCheckableMessageBox.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgCheckableMessageBox.cpp_parameters [ 40%] Generating moc_DlgCommandsImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgCommandsImp.cpp_parameters [ 40%] Generating moc_DlgCustomizeImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgCustomizeImp.cpp_parameters [ 40%] Generating moc_DlgCustomizeSpNavSettings.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgCustomizeSpNavSettings.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PrimitiveFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartCircle.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartCircle.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 40%] Generating moc_DlgCustomizeSpaceball.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgCustomizeSpaceball.cpp_parameters [ 40%] Generating moc_DlgDisplayPropertiesImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgDisplayPropertiesImp.cpp_parameters [ 40%] Building CXX object src/Mod/Points/App/CMakeFiles/Points.dir/PointsGrid.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPoints_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Points.dir/PointsGrid.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App/PointsGrid.cpp [ 40%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeaturePartFuse.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeaturePartFuse.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartFuse.cpp [ 40%] Building CXX object src/Mod/Spreadsheet/App/CMakeFiles/Spreadsheet.dir/PropertySheetPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSpreadsheet_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Spreadsheet.dir/PropertySheetPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/PropertySheetPyImp.cpp [ 40%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeaturePartImportBrep.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeaturePartImportBrep.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartImportBrep.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartBoolean.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartCut.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartCut.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 40%] Generating moc_DlgEditFileIncludeProptertyExternal.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgEditFileIncludeProptertyExternal.cpp_parameters [ 40%] Generating moc_DlgEditorImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgEditorImp.cpp_parameters [ 40%] Generating moc_DlgExpressionInput.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgExpressionInput.cpp_parameters [ 40%] Generating moc_DlgGeneralImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgGeneralImp.cpp_parameters [ 40%] Generating moc_DlgInputDialogImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgInputDialogImp.cpp_parameters [ 40%] Generating moc_DlgKeyboardImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgKeyboardImp.cpp_parameters [ 40%] Generating moc_DlgMacroExecuteImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgMacroExecuteImp.cpp_parameters [ 40%] Generating moc_DlgMacroRecordImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgMacroRecordImp.cpp_parameters [ 40%] Generating moc_DlgMaterialPropertiesImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgMaterialPropertiesImp.cpp_parameters [ 40%] Generating moc_DlgOnlineHelpImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgOnlineHelpImp.cpp_parameters [ 40%] Generating moc_DlgParameterImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgParameterImp.cpp_parameters [ 40%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeaturePartImportIges.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeaturePartImportIges.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartImportIges.cpp [ 40%] Generating moc_DlgPreferencesImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgPreferencesImp.cpp_parameters [ 40%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/Builder.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/Builder.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Builder.cpp [ 40%] Generating moc_DlgProjectInformationImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgProjectInformationImp.cpp_parameters [ 40%] Generating moc_DlgProjectUtility.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgProjectUtility.cpp_parameters [ 40%] Generating moc_DlgPropertyLink.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgPropertyLink.cpp_parameters [ 40%] Generating moc_DlgReportViewImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgReportViewImp.cpp_parameters [ 40%] Generating moc_DlgRunExternal.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgRunExternal.cpp_parameters [ 40%] Generating moc_DlgSettings3DViewImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgSettings3DViewImp.cpp_parameters [ 40%] Generating moc_DlgSettingsColorGradientImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgSettingsColorGradientImp.cpp_parameters [ 40%] Generating moc_DlgSettingsDocumentImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgSettingsDocumentImp.cpp_parameters [ 40%] Generating moc_DlgSettingsImageImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgSettingsImageImp.cpp_parameters [ 40%] Generating moc_DlgSettingsMacroImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgSettingsMacroImp.cpp_parameters [ 40%] Generating moc_DlgSettingsUnitsImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgSettingsUnitsImp.cpp_parameters [ 40%] Generating moc_DlgSettingsViewColor.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgSettingsViewColor.cpp_parameters [ 41%] Generating moc_DlgToolbarsImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgToolbarsImp.cpp_parameters [ 41%] Generating moc_DlgUndoRedo.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgUndoRedo.cpp_parameters [ 41%] Generating moc_DlgUnitsCalculatorImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgUnitsCalculatorImp.cpp_parameters [ 41%] Generating moc_DlgWorkbenchesImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DlgWorkbenchesImp.cpp_parameters [ 41%] Generating moc_DockWindow.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DockWindow.cpp_parameters [ 41%] Building CXX object src/Mod/Points/App/CMakeFiles/Points.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPoints_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Points.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App/PreCompiled.cpp [ 41%] Generating moc_DockWindowManager.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DockWindowManager.cpp_parameters [ 41%] Building CXX object src/Mod/Points/App/CMakeFiles/Points.dir/Properties.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPoints_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Points.dir/Properties.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App/Properties.cpp [ 41%] Generating moc_DocumentRecovery.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DocumentRecovery.cpp_parameters [ 41%] Generating moc_DownloadItem.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DownloadItem.cpp_parameters [ 41%] Generating moc_DownloadManager.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_DownloadManager.cpp_parameters [ 41%] Generating moc_EditorView.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_EditorView.cpp_parameters [ 41%] Generating moc_ExpressionCompleter.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_ExpressionCompleter.cpp_parameters [ 41%] Building CXX object src/Mod/Spreadsheet/App/CMakeFiles/Spreadsheet.dir/PropertyColumnWidths.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSpreadsheet_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Spreadsheet.dir/PropertyColumnWidths.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/PropertyColumnWidths.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObserver.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/PropertySheet.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/PropertySheetPyImp.cpp:4: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartBoolean.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartFuse.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartFuse.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartImportBrep.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartImportBrep.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/PropertySheetPyImp.cpp:8: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/PropertySheetPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/PropertySheetPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 41%] Generating moc_FileDialog.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_FileDialog.cpp_parameters [ 41%] Generating moc_Flag.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_Flag.cpp_parameters [ 41%] Generating moc_GraphicsViewZoom.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_GraphicsViewZoom.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartImportIges.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartImportIges.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 41%] Generating moc_GraphvizView-internal.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_GraphvizView-internal.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp [ 41%] Generating moc_GraphvizView.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_GraphvizView.cpp_parameters [ 41%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/Curvature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/Curvature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Curvature.cpp [ 41%] Building CXX object src/Mod/Spreadsheet/App/CMakeFiles/Spreadsheet.dir/PropertyColumnWidthsPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSpreadsheet_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Spreadsheet.dir/PropertyColumnWidthsPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/PropertyColumnWidthsPyImp.cpp [ 41%] Building CXX object src/Mod/Spreadsheet/App/CMakeFiles/Spreadsheet.dir/PropertyRowHeights.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSpreadsheet_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Spreadsheet.dir/PropertyRowHeights.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/PropertyRowHeights.cpp [ 41%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeaturePartImportStep.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeaturePartImportStep.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartImportStep.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/PropertyColumnWidthsPyImp.cpp:8: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/PropertyColumnWidthsPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/PropertyColumnWidthsPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 41%] Generating moc_GuiApplication.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_GuiApplication.cpp_parameters [ 41%] Generating moc_GuiApplicationNativeEventAware.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_GuiApplicationNativeEventAware.cpp_parameters [ 41%] Generating moc_InputField.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_InputField.cpp_parameters [ 41%] Generating moc_InputVector.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_InputVector.cpp_parameters In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Curvature.cpp:31: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 41%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeaturePartPolygon.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeaturePartPolygon.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartPolygon.cpp [ 41%] Generating moc_MDIView.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_MDIView.cpp_parameters [ 41%] Building CXX object src/Mod/Points/App/CMakeFiles/Points.dir/PropertyPointKernel.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPoints_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Points.dir/PropertyPointKernel.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App/PropertyPointKernel.cpp [ 41%] Generating moc_MainWindow.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_MainWindow.cpp_parameters [ 41%] Generating moc_ManualAlignment.cpp [ 41%] Building CXX object src/Mod/Spreadsheet/App/CMakeFiles/Spreadsheet.dir/PropertyRowHeightsPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_ManualAlignment.cpp_parameters cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSpreadsheet_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Spreadsheet.dir/PropertyRowHeightsPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/PropertyRowHeightsPyImp.cpp [ 41%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeaturePartSection.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeaturePartSection.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartSection.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/PropertyRowHeightsPyImp.cpp:8: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/PropertyRowHeightsPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/PropertyRowHeightsPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 41%] Generating moc_NetworkRetriever.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_NetworkRetriever.cpp_parameters [ 41%] Generating moc_OnlineDocumentation.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_OnlineDocumentation.cpp_parameters [ 41%] Building CXX object src/Mod/Spreadsheet/App/CMakeFiles/Spreadsheet.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSpreadsheet_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Spreadsheet.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/PreCompiled.cpp [ 41%] Building CXX object src/Mod/Spreadsheet/App/CMakeFiles/Spreadsheet.dir/Sheet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSpreadsheet_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Spreadsheet.dir/Sheet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/Sheet.cpp [ 41%] Building CXX object src/Mod/Spreadsheet/App/CMakeFiles/Spreadsheet.dir/SheetPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSpreadsheet_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Spreadsheet.dir/SheetPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/SheetPyImp.cpp [ 41%] Generating moc_Placement.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_Placement.cpp_parameters [ 41%] Building CXX object src/Mod/Points/App/CMakeFiles/Points.dir/Structured.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPoints_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Points.dir/Structured.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App/Structured.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartImportStep.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartImportStep.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 41%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/Decimation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/Decimation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Decimation.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartPolygon.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartPolygon.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 41%] Generating moc_PrefWidgets.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_PrefWidgets.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartBoolean.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartSection.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartSection.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 41%] Generating moc_ProgressBar.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_ProgressBar.cpp_parameters [ 41%] Generating moc_ProjectView.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_ProjectView.cpp_parameters [ 41%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeaturePartSpline.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeaturePartSpline.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartSpline.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/Sheet.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/SheetPyImp.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 41%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeatureChamfer.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeatureChamfer.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureChamfer.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App/PointsFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App/Structured.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/App/Structured.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 41%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeatureCompound.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeatureCompound.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureCompound.cpp [ 41%] Generating moc_PropertyPage.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_PropertyPage.cpp_parameters [ 41%] Generating moc_PropertyView.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_PropertyView.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/SheetPyImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/SheetPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App/SheetPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartSpline.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartSpline.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 41%] Linking CXX shared library ../../../../Mod/Points/Points.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/Points.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,Points.so -o ../../../../Mod/Points/Points.so CMakeFiles/Points.dir/AppPoints.cpp.o CMakeFiles/Points.dir/AppPointsPy.cpp.o CMakeFiles/Points.dir/Points.cpp.o CMakeFiles/Points.dir/PointsPyImp.cpp.o CMakeFiles/Points.dir/PointsAlgos.cpp.o CMakeFiles/Points.dir/PointsFeature.cpp.o CMakeFiles/Points.dir/PointsGrid.cpp.o CMakeFiles/Points.dir/PreCompiled.cpp.o CMakeFiles/Points.dir/Properties.cpp.o CMakeFiles/Points.dir/PropertyPointKernel.cpp.o CMakeFiles/Points.dir/Structured.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../lib/libFreeCADApp.so /usr/lib64/libQt5Concurrent.so.5.15.2 ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread -lpthread /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 [ 41%] Generating moc_PythonConsole.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_PythonConsole.cpp_parameters [ 41%] Generating moc_PythonDebugger.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_PythonDebugger.cpp_parameters [ 41%] Generating moc_PythonEditor.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_PythonEditor.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/property_map/vector_property_map.hpp:14, from /usr/include/boost/property_map/property_map.hpp:602, from /usr/include/boost/graph/topological_sort.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/Sheet.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 42%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/Definitions.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/Definitions.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Definitions.cpp [ 42%] Generating moc_QListWidgetCustom.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_QListWidgetCustom.cpp_parameters [ 42%] Generating moc_QuantitySpinBox.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_QuantitySpinBox.cpp_parameters gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 42%] Built target Points [ 42%] Building CXX object src/Mod/Spreadsheet/App/CMakeFiles/Spreadsheet.dir/SheetObserver.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSpreadsheet_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Spreadsheet.dir/SheetObserver.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/SheetObserver.cpp [ 42%] Generating moc_QuantitySpinBox_p.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_QuantitySpinBox_p.cpp_parameters [ 42%] Generating moc_ReportView.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_ReportView.cpp_parameters [ 42%] Generating moc_SceneInspector.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_SceneInspector.cpp_parameters [ 42%] Generating moc_SelectionView.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_SelectionView.cpp_parameters /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:117, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/Sheet.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl: In instantiation of 'PyTypeObject App::FeaturePythonPyT::Type': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:99:68: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 29 | PyTypeObject FeaturePythonPyT::Type = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureCompound.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureCompound.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureChamfer.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureChamfer.cpp:37: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 42%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeatureExtrusion.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeatureExtrusion.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureExtrusion.cpp [ 42%] Building CXX object src/Mod/Spreadsheet/App/CMakeFiles/Spreadsheet.dir/Utils.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSpreadsheet_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Spreadsheet.dir/Utils.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/Utils.cpp [ 42%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/Degeneration.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/Degeneration.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Degeneration.cpp [ 42%] Generating moc_SpinBox.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_SpinBox.cpp_parameters [ 42%] Generating moc_Splashscreen.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_Splashscreen.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObserver.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/SheetObserver.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/SheetObserver.cpp:24: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 42%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeatureFace.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeatureFace.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureFace.cpp [ 42%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeatureFillet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeatureFillet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureFillet.cpp [ 42%] Generating moc_TaskCSysDragger.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_TaskCSysDragger.cpp_parameters [ 42%] Building CXX object src/Mod/Spreadsheet/App/CMakeFiles/Spreadsheet.dir/AppSpreadsheet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSpreadsheet_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Spreadsheet.dir/AppSpreadsheet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/AppSpreadsheet.cpp [ 42%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/Elements.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/Elements.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Elements.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/regex/v4/regex_workaround.hpp:44, from /usr/include/boost/regex/v4/regex.hpp:32, from /usr/include/boost/regex.hpp:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/Utils.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureExtrusion.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureExtrusion.cpp:48: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 42%] Generating moc_TaskDlgRelocation.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_TaskDlgRelocation.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureFace.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureFace.cpp:46: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureFillet.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureFillet.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 42%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/Evaluation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/Evaluation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Evaluation.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/Sheet.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/AppSpreadsheet.cpp:23: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 42%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/Grid.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/Grid.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Grid.cpp [ 42%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/Info.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/Info.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Info.cpp [ 42%] Generating moc_TextDocumentEditorView.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_TextDocumentEditorView.cpp_parameters [ 42%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeatureMirroring.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeatureMirroring.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureMirroring.cpp [ 42%] Linking CXX shared library ../../../../Mod/Spreadsheet/Spreadsheet.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/Spreadsheet.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,Spreadsheet.so -o ../../../../Mod/Spreadsheet/Spreadsheet.so CMakeFiles/Spreadsheet.dir/Cell.cpp.o CMakeFiles/Spreadsheet.dir/PropertySheet.cpp.o CMakeFiles/Spreadsheet.dir/PropertySheetPyImp.cpp.o CMakeFiles/Spreadsheet.dir/PropertyColumnWidths.cpp.o CMakeFiles/Spreadsheet.dir/PropertyColumnWidthsPyImp.cpp.o CMakeFiles/Spreadsheet.dir/PropertyRowHeights.cpp.o CMakeFiles/Spreadsheet.dir/PropertyRowHeightsPyImp.cpp.o CMakeFiles/Spreadsheet.dir/PreCompiled.cpp.o CMakeFiles/Spreadsheet.dir/Sheet.cpp.o CMakeFiles/Spreadsheet.dir/SheetPyImp.cpp.o CMakeFiles/Spreadsheet.dir/SheetObserver.cpp.o CMakeFiles/Spreadsheet.dir/Utils.cpp.o CMakeFiles/Spreadsheet.dir/AppSpreadsheet.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread -lpthread /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 [ 42%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/KDTree.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/KDTree.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/KDTree.cpp [ 42%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeatureRevolution.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeatureRevolution.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureRevolution.cpp [ 42%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/MeshIO.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/MeshIO.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/MeshIO.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 42%] Built target Spreadsheet In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/KDTree.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree/kdtree++/kdtree.hpp: In instantiation of 'KDTree::_Node<_Val>* KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::_M_new_node(KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::const_reference, KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::_Base_ptr, KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::_Base_ptr, KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::_Base_ptr) [with long unsigned int __K = 3; _Val = Point3d; _Acc = KDTree::_Bracket_accessor; _Dist = KDTree::squared_difference; _Cmp = std::less; _Alloc = std::allocator >; KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::_Link_type = KDTree::_Node*; KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::const_reference = const Point3d&; KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::value_type = Point3d; KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::_Base_ptr = KDTree::_Node_base*]': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree/kdtree++/kdtree.hpp:320:30: required from 'KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::iterator KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::insert(KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::const_reference) [with long unsigned int __K = 3; _Val = Point3d; _Acc = KDTree::_Bracket_accessor; _Dist = KDTree::squared_difference; _Cmp = std::less; _Alloc = std::allocator >; KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::iterator = KDTree::_Iterator; KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::const_reference = const Point3d&; KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::value_type = Point3d]' /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/KDTree.cpp:81:48: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree/kdtree++/kdtree.hpp:1166:34: warning: implicitly-declared 'Point3d::Point3d(const Point3d&)' is deprecated [-Wdeprecated-copy] 1166 | _Base::_M_construct_node(new_node, __V, __PARENT, __LEFT, __RIGHT); | ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/KDTree.cpp:59:16: note: because 'Point3d' has user-provided 'void Point3d::operator=(const Point3d&)' 59 | inline void operator=(const Point3d& other) | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree/kdtree++/kdtree.hpp:81, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/KDTree.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree/kdtree++/allocator.hpp:66:48: note: initializing argument 2 of 'void KDTree::_Alloc_base<_Tp, _Alloc>::_M_construct_node(KDTree::_Alloc_base<_Tp, _Alloc>::_Node_*, _Tp, KDTree::_Alloc_base<_Tp, _Alloc>::_Base_ptr, KDTree::_Alloc_base<_Tp, _Alloc>::_Base_ptr, KDTree::_Alloc_base<_Tp, _Alloc>::_Base_ptr) [with _Tp = Point3d; _Alloc = std::allocator >; KDTree::_Alloc_base<_Tp, _Alloc>::_Node_ = KDTree::_Node; KDTree::_Alloc_base<_Tp, _Alloc>::_Base_ptr = KDTree::_Node_base*]' 66 | _M_construct_node(_Node_* __p, _Tp const __V = _Tp(), | ~~~~~~~~~~^~~~~~~~~~~ [ 42%] Generating moc_TextEdit.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_TextEdit.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree/kdtree++/allocator.hpp:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree/kdtree++/kdtree.hpp:81, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/KDTree.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree/kdtree++/node.hpp: In instantiation of 'KDTree::_Node<_Val>::_Node(const _Val&, KDTree::_Node_base::_Base_ptr, KDTree::_Node_base::_Base_ptr, KDTree::_Node_base::_Base_ptr) [with _Val = Point3d; KDTree::_Node_base::_Base_ptr = KDTree::_Node_base*]': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree/kdtree++/allocator.hpp:71:9: required from 'void KDTree::_Alloc_base<_Tp, _Alloc>::_M_construct_node(KDTree::_Alloc_base<_Tp, _Alloc>::_Node_*, _Tp, KDTree::_Alloc_base<_Tp, _Alloc>::_Base_ptr, KDTree::_Alloc_base<_Tp, _Alloc>::_Base_ptr, KDTree::_Alloc_base<_Tp, _Alloc>::_Base_ptr) [with _Tp = Point3d; _Alloc = std::allocator >; KDTree::_Alloc_base<_Tp, _Alloc>::_Node_ = KDTree::_Node; KDTree::_Alloc_base<_Tp, _Alloc>::_Base_ptr = KDTree::_Node_base*]' /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree/kdtree++/kdtree.hpp:1166:34: required from 'KDTree::_Node<_Val>* KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::_M_new_node(KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::const_reference, KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::_Base_ptr, KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::_Base_ptr, KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::_Base_ptr) [with long unsigned int __K = 3; _Val = Point3d; _Acc = KDTree::_Bracket_accessor; _Dist = KDTree::squared_difference; _Cmp = std::less; _Alloc = std::allocator >; KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::_Link_type = KDTree::_Node*; KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::const_reference = const Point3d&; KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::value_type = Point3d; KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::_Base_ptr = KDTree::_Node_base*]' /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree/kdtree++/kdtree.hpp:320:30: required from 'KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::iterator KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::insert(KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::const_reference) [with long unsigned int __K = 3; _Val = Point3d; _Acc = KDTree::_Bracket_accessor; _Dist = KDTree::squared_difference; _Cmp = std::less; _Alloc = std::allocator >; KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::iterator = KDTree::_Iterator; KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::const_reference = const Point3d&; KDTree::KDTree<__K, _Val, _Acc, _Dist, _Cmp, _Alloc>::value_type = Point3d]' /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/KDTree.cpp:81:48: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree/kdtree++/node.hpp:60:66: warning: implicitly-declared 'Point3d::Point3d(const Point3d&)' is deprecated [-Wdeprecated-copy] 60 | : _Node_base(__PARENT, __LEFT, __RIGHT), _M_value(__VALUE) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/KDTree.cpp:59:16: note: because 'Point3d' has user-provided 'void Point3d::operator=(const Point3d&)' 59 | inline void operator=(const Point3d& other) | ^~~~~~~~ [ 42%] Generating moc_TextureMapping.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_TextureMapping.cpp_parameters [ 42%] Generating moc_ToolBox.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_ToolBox.cpp_parameters [ 42%] Generating moc_Transform.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_Transform.cpp_parameters [ 42%] Generating moc_Tree.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_Tree.cpp_parameters [ 42%] Generating moc_TreeView.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_TreeView.cpp_parameters [ 42%] Generating moc_View3DInventor.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_View3DInventor.cpp_parameters [ 42%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/MeshKernel.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/MeshKernel.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/MeshKernel.cpp [ 42%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/Projection.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/Projection.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Projection.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureMirroring.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureMirroring.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 43%] Generating moc_WidgetFactory.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_WidgetFactory.cpp_parameters [ 43%] Generating moc_Widgets.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/moc_Widgets.cpp_parameters [ 43%] Generating propertyeditor/moc_PropertyEditor.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor/moc_PropertyEditor.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureRevolution.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureRevolution.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 43%] Generating propertyeditor/moc_PropertyItem.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor/moc_PropertyItem.cpp_parameters /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/MeshKernel.cpp: In member function 'MeshCore::MeshPointArray MeshCore::MeshKernel::GetPoints(const std::vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/MeshKernel.cpp:782:12: warning: implicitly-declared 'MeshCore::MeshPointArray::MeshPointArray(const MeshCore::MeshPointArray&)' is deprecated [-Wdeprecated-copy] 782 | return ary; | ^~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/MeshKernel.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Algorithm.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/MeshKernel.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Elements.h:534:19: note: because 'MeshCore::MeshPointArray' has user-provided 'MeshCore::MeshPointArray& MeshCore::MeshPointArray::operator=(const MeshCore::MeshPointArray&)' 534 | MeshPointArray& operator = (const MeshPointArray &rclPAry); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/MeshKernel.cpp: In member function 'MeshCore::MeshFacetArray MeshCore::MeshKernel::GetFacets(const std::vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/MeshKernel.cpp:791:12: warning: implicitly-declared 'MeshCore::MeshFacetArray::MeshFacetArray(const MeshCore::MeshFacetArray&)' is deprecated [-Wdeprecated-copy] 791 | return ary; | ^~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/MeshKernel.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Algorithm.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/MeshKernel.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Elements.h:587:21: note: because 'MeshCore::MeshFacetArray' has user-provided 'MeshCore::MeshFacetArray& MeshCore::MeshFacetArray::operator=(const MeshCore::MeshFacetArray&)' 587 | MeshFacetArray& operator = (const MeshFacetArray &rclFAry); | ^~~~~~~~ [ 43%] Generating propertyeditor/moc_PropertyItemDelegate.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor/moc_PropertyItemDelegate.cpp_parameters [ 43%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/Segmentation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/Segmentation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Segmentation.cpp [ 43%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeatureOffset.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeatureOffset.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureOffset.cpp [ 43%] Generating propertyeditor/moc_PropertyModel.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor/moc_PropertyModel.cpp_parameters [ 43%] Generating qrc_iisTaskPanel.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/rcc --name iisTaskPanel --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/qrc_iisTaskPanel.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/iisTaskPanel/src/iisTaskPanel.qrc [ 43%] Generating qrc_resource.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/rcc --name resource --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/qrc_resource.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Icons/resource.qrc [ 43%] Generating qrc_schemes.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/rcc --name schemes --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/qrc_schemes.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/schemes.qrc [ 43%] Generating qrc_translation.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/rcc --name translation --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/qrc_translation.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Language/translation.qrc [ 43%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/SetOperations.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/SetOperations.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/SetOperations.cpp [ 43%] Generating ui_AboutApplication.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_AboutApplication.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AboutApplication.ui [ 43%] Generating ui_Clipping.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_Clipping.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.ui [ 44%] Generating ui_DemoMode.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DemoMode.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.ui [ 44%] Generating ui_DlgActions.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgActions.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActions.ui [ 44%] Generating ui_DlgActivateWindow.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgActivateWindow.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActivateWindow.ui [ 44%] Generating ui_DlgAuthorization.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgAuthorization.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgAuthorization.ui [ 44%] Generating ui_DlgCheckableMessageBox.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgCheckableMessageBox.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCheckableMessageBox.ui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCheckableMessageBox.ui: Warning: Invalid signal/slot connection: "buttonBox" -> "Utils::CheckableMessageBox". /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCheckableMessageBox.ui: Warning: Invalid signal/slot connection: "buttonBox" -> "Utils::CheckableMessageBox". [ 44%] Generating ui_DlgChooseIcon.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgChooseIcon.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgChooseIcon.ui [ 44%] Generating ui_DlgCommands.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgCommands.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCommands.ui [ 44%] Generating ui_DlgCustomizeSpNavSettings.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgCustomizeSpNavSettings.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeSpNavSettings.ui [ 44%] Generating ui_DlgDisplayProperties.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgDisplayProperties.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayProperties.ui [ 44%] Generating ui_DlgEditor.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditor.ui [ 44%] Generating ui_DlgExpressionInput.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgExpressionInput.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgExpressionInput.ui [ 44%] Generating ui_DlgGeneral.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgGeneral.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgGeneral.ui [ 44%] Generating ui_DlgInputDialog.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgInputDialog.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgInputDialog.ui [ 44%] Generating ui_DlgKeyboard.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgKeyboard.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgKeyboard.ui [ 44%] Generating ui_DlgLocationAngle.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgLocationAngle.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgLocationAngle.ui [ 44%] Generating ui_DlgLocationPos.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgLocationPos.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgLocationPos.ui [ 44%] Generating ui_DlgMacroExecute.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgMacroExecute.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecute.ui [ 44%] Generating ui_DlgMacroRecord.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgMacroRecord.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroRecord.ui [ 44%] Generating ui_DlgMaterialProperties.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgMaterialProperties.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMaterialProperties.ui [ 44%] Generating ui_DlgOnlineHelp.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgOnlineHelp.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelp.ui [ 44%] Generating ui_DlgParameter.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgParameter.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameter.ui [ 44%] Generating ui_DlgPreferences.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgPreferences.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferences.ui [ 44%] Generating ui_DlgProjectInformation.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgProjectInformation.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectInformation.ui [ 44%] Generating ui_DlgProjectUtility.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgProjectUtility.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectUtility.ui [ 44%] Generating ui_DlgPropertyLink.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgPropertyLink.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPropertyLink.ui [ 44%] Generating ui_DlgReportView.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgReportView.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgReportView.ui [ 44%] Generating ui_DlgRunExternal.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgRunExternal.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgRunExternal.ui [ 44%] Generating ui_DlgSettings3DView.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettings3DView.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DView.ui [ 44%] Generating ui_DlgSettingsColorGradient.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsColorGradient.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsColorGradient.ui [ 44%] Generating ui_DlgSettingsDocument.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsDocument.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocument.ui [ 44%] Generating ui_DlgSettingsImage.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsImage.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsImage.ui [ 44%] Generating ui_DlgSettingsMacro.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsMacro.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacro.ui [ 44%] Generating ui_DlgSettingsUnits.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsUnits.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsUnits.ui [ 44%] Generating ui_DlgSettingsViewColor.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsViewColor.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.ui [ 44%] Generating ui_DlgToolbars.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgToolbars.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbars.ui [ 44%] Generating ui_DlgTreeWidget.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgTreeWidget.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgTreeWidget.ui [ 44%] Generating ui_DlgUnitsCalculator.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgUnitsCalculator.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgUnitsCalculator.ui [ 44%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/Smoothing.cpp.o [ 45%] Generating ui_DlgWorkbenches.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgWorkbenches.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgWorkbenches.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/Smoothing.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Smoothing.cpp [ 45%] Generating ui_DocumentRecovery.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DocumentRecovery.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.ui [ 45%] Generating ui_DownloadItem.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DownloadItem.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.ui [ 45%] Generating ui_DownloadManager.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DownloadManager.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadManager.ui [ 45%] Generating ui_InputVector.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_InputVector.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.ui [ 45%] Generating ui_MouseButtons.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_MouseButtons.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MouseButtons.ui [ 45%] Generating ui_Placement.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_Placement.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.ui [ 45%] Generating ui_SceneInspector.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_SceneInspector.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.ui [ 45%] Generating ui_TaskAppearance.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_TaskAppearance.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskAppearance.ui [ 45%] Generating ui_TaskSelectLinkProperty.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_TaskSelectLinkProperty.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskSelectLinkProperty.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/CMakeFiles/FreeCADGui.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/CMakeFiles/FreeCADGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/CMakeFiles/FreeCADGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/CMakeFiles/FreeCADGui.dir/depend.internal". [ 45%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/PartFeatures.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/PartFeatures.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeatures.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Smoothing.cpp: In member function 'virtual void MeshCore::PlaneFitSmoothing::Smooth(unsigned int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Smoothing.cpp:69:60: warning: implicitly-declared 'MeshCore::MeshPointArray::MeshPointArray(const MeshCore::MeshPointArray&)' is deprecated [-Wdeprecated-copy] 69 | MeshCore::MeshPointArray PointArray = kernel.GetPoints(); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/MeshKernel.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Smoothing.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Elements.h:534:19: note: because 'MeshCore::MeshPointArray' has user-provided 'MeshCore::MeshPointArray& MeshCore::MeshPointArray::operator=(const MeshCore::MeshPointArray&)' 534 | MeshPointArray& operator = (const MeshPointArray &rclPAry); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Smoothing.cpp: In member function 'virtual void MeshCore::PlaneFitSmoothing::SmoothPoints(unsigned int, const std::vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Smoothing.cpp:122:60: warning: implicitly-declared 'MeshCore::MeshPointArray::MeshPointArray(const MeshCore::MeshPointArray&)' is deprecated [-Wdeprecated-copy] 122 | MeshCore::MeshPointArray PointArray = kernel.GetPoints(); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/MeshKernel.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Smoothing.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Elements.h:534:19: note: because 'MeshCore::MeshPointArray' has user-provided 'MeshCore::MeshPointArray& MeshCore::MeshPointArray::operator=(const MeshCore::MeshPointArray&)' 534 | MeshPointArray& operator = (const MeshPointArray &rclPAry); | ^~~~~~~~ [ 45%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/Tools.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/Tools.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Tools.cpp [ 45%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/PartFeature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/PartFeature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.cpp [ 45%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/TopoAlgorithm.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/TopoAlgorithm.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/TopoAlgorithm.cpp [ 45%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/Triangulation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/Triangulation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Triangulation.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureOffset.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureOffset.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 45%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/Trim.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/Trim.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Trim.cpp Scanning dependencies of target FreeCADGui gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Gui/CMakeFiles/FreeCADGui.dir/build.make src/Gui/CMakeFiles/FreeCADGui.dir/build In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeatures.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeatures.cpp:50: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 45%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Application.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Application.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp [ 45%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/PartFeatureReference.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/PartFeatureReference.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeatureReference.cpp [ 45%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Core/Visitor.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Core/Visitor.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Core/Visitor.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.cpp:57: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 45%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprCylinderFit3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprCylinderFit3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4ApprCylinderFit3.cpp [ 45%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprGaussPointsFit2.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprGaussPointsFit2.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4ApprGaussPointsFit2.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:117, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.cpp:55: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl: In instantiation of 'PyTypeObject App::FeaturePythonPyT::Type': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:99:68: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 29 | PyTypeObject FeaturePythonPyT::Type = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 45%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprGaussPointsFit3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprGaussPointsFit3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4ApprGaussPointsFit3.cpp [ 45%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprLineFit3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprLineFit3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4ApprLineFit3.cpp [ 45%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprPlaneFit3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprPlaneFit3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4ApprPlaneFit3.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:28: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 45%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprPolyFit3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprPolyFit3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4ApprPolyFit3.cpp [ 45%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprQuadraticFit3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprQuadraticFit3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4ApprQuadraticFit3.cpp [ 45%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprSphereFit3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprSphereFit3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4ApprSphereFit3.cpp [ 45%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Part2DObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Part2DObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Part2DObject.cpp [ 45%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4ContBox2.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4ContBox2.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4ContBox2.cpp [ 45%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4ContBox3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4ContBox3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4ContBox3.cpp [ 45%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4ConvexHull.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4ConvexHull.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4ConvexHull.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeatureReference.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeatureReference.cpp:42: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 45%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/PrimitiveFeature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/PrimitiveFeature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PrimitiveFeature.cpp [ 45%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4ConvexHull1.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4ConvexHull1.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4ConvexHull1.cpp [ 45%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4ConvexHull2.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4ConvexHull2.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4ConvexHull2.cpp [ 45%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4ConvexHull3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4ConvexHull3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4ConvexHull3.cpp /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 45%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4DelPolygonEdge.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4DelPolygonEdge.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4DelPolygonEdge.cpp [ 46%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4DelPolyhedronFace.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4DelPolyhedronFace.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4DelPolyhedronFace.cpp [ 46%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4DelTetrahedron.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4DelTetrahedron.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4DelTetrahedron.cpp [ 46%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4DelTriangle.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4DelTriangle.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4DelTriangle.cpp [ 46%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FeatureGeometrySet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FeatureGeometrySet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureGeometrySet.cpp [ 46%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4Delaunay.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4Delaunay.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Delaunay.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:70: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QCloseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:73: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.h:115:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 115 | DlgPreferencesImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QCloseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:73: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.h:54:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 54 | DlgCustomizeImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QCloseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 46%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4Delaunay1.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4Delaunay1.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Delaunay1.cpp [ 46%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4Delaunay2.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4Delaunay2.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Delaunay2.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgOnlineHelp.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:89: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QCloseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgOnlineHelp.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:89: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QCloseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Part2DObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Part2DObject.cpp:52: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgOnlineHelp.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:89: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QCloseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgOnlineHelp.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:89: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QCloseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgOnlineHelp.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:89: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QCloseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.h:45:90: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 45 | AbstractSplitView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QCloseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.h:111:103: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 111 | SplitView3DInventor(int views, Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QCloseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:97: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QCloseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 46%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4Delaunay3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4Delaunay3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Delaunay3.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:124: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgOnlineHelp.h:16, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:89: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp: In member function 'QStringList Gui::Application::workbenches() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:1344:71: warning: 'QStringList QString::split(QChar, QString::SplitBehavior, Qt::CaseSensitivity) const' is deprecated: Use Qt::SplitBehavior variant instead [-Wdeprecated-declarations] 1344 | hidden = items.split(QLatin1Char(';'), QString::SkipEmptyParts); | ^ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qdatastream.h:44, from /usr/include/qt5/QtGui/qregion.h:49, from /usr/include/qt5/QtGui/qevent.h:45, from /usr/include/qt5/QtGui/QCloseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:33: /usr/include/qt5/QtCore/qstring.h:615:17: note: declared here 615 | QStringList split(QChar sep, SplitBehavior behavior, | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:1350:70: warning: 'QStringList QString::split(QChar, QString::SplitBehavior, Qt::CaseSensitivity) const' is deprecated: Use Qt::SplitBehavior variant instead [-Wdeprecated-declarations] 1350 | extra = items.split(QLatin1Char(';'), QString::SkipEmptyParts); | ^ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qdatastream.h:44, from /usr/include/qt5/QtGui/qregion.h:49, from /usr/include/qt5/QtGui/qevent.h:45, from /usr/include/qt5/QtGui/QCloseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.cpp:33: /usr/include/qt5/QtCore/qstring.h:615:17: note: declared here 615 | QStringList split(QChar sep, SplitBehavior behavior, | ^~~~~ [ 46%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4DistLine3Segment3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4DistLine3Segment3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4DistLine3Segment3.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PrimitiveFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PrimitiveFeature.cpp:65: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:117, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Part2DObject.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl: In instantiation of 'PyTypeObject App::FeaturePythonPyT::Type': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:99:68: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 29 | PyTypeObject FeaturePythonPyT::Type = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 46%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4DistLine3Triangle3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4DistLine3Triangle3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4DistLine3Triangle3.cpp [ 46%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4DistSegment3Segment3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4DistSegment3Segment3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4DistSegment3Segment3.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PrimitiveFeature.cpp:67: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:52:5: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 52 | }; \ | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PrimitiveFeature.cpp:112:5: note: in expansion of macro 'PYTHON_TYPE_IMP' 112 | PYTHON_TYPE_IMP(PrimitivePy, PartFeaturePy) | ^~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:52:5: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] 52 | }; \ | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PrimitiveFeature.cpp:112:5: note: in expansion of macro 'PYTHON_TYPE_IMP' 112 | PYTHON_TYPE_IMP(PrimitivePy, PartFeaturePy) | ^~~~~~~~~~~~~~~ [ 46%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4DistSegment3Triangle3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4DistSegment3Triangle3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4DistSegment3Triangle3.cpp [ 46%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ApplicationPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ApplicationPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp [ 46%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/CustomFeature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/CustomFeature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/CustomFeature.cpp [ 46%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/BodyBase.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/BodyBase.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BodyBase.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureGeometrySet.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureGeometrySet.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 46%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4DistVector3Plane3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4DistVector3Plane3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4DistVector3Plane3.cpp [ 46%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/DatumFeature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/DatumFeature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/DatumFeature.cpp [ 46%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4DistVector3Segment3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4DistVector3Segment3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4DistVector3Segment3.cpp [ 47%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/AttachExtension.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/AttachExtension.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/AttachExtension.cpp [ 47%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4DistVector3Triangle3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4DistVector3Triangle3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4DistVector3Triangle3.cpp [ 47%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/PropertyTopoShape.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/PropertyTopoShape.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/CustomFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/CustomFeature.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 47%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4Distance.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4Distance.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Distance.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/DocumentObjectPy.h:8, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/GeoFeaturePy.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/PartFeaturePy.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BodyBasePy.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BodyBase.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 47%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4ETManifoldMesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4ETManifoldMesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4ETManifoldMesh.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/DatumFeature.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/DatumFeature.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 47%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4Eigen.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4Eigen.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Eigen.cpp [ 47%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/PropertyGeometryList.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/PropertyGeometryList.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyGeometryList.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/AttachExtension.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/AttachExtension.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/regex/v4/regex_workaround.hpp:44, from /usr/include/boost/regex/v4/regex.hpp:32, from /usr/include/boost/regex.hpp:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp:39: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 47%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/ArcPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/ArcPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ArcPyImp.cpp [ 47%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4FoundationPCH.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4FoundationPCH.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4FoundationPCH.cpp [ 47%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4ImplicitSurface.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4ImplicitSurface.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4ImplicitSurface.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.h:45:90: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 45 | AbstractSplitView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.h:111:103: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 111 | SplitView3DInventor(int views, Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.h:115:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 115 | DlgPreferencesImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.h:54:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 54 | DlgCustomizeImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 47%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4Intersector.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4Intersector.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Intersector.cpp [ 47%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/ArcOfConicPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/ArcOfConicPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ArcOfConicPyImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/regex/v4/regex_workaround.hpp:44, from /usr/include/boost/regex/v4/regex.hpp:32, from /usr/include/boost/regex.hpp:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp:39: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp: In static member function 'static PyObject* Gui::Application::sShowPreferences(PyObject*, PyObject*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp:1219:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 1219 | Gui::Dialog::DlgPreferencesImp cDlg(getMainWindow()); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp: In static member function 'static PyObject* Gui::Application::sCreateViewer(PyObject*, PyObject*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp:1242:61: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 1242 | View3DInventor* viewer = new View3DInventor(0, 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp:1250:85: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 1250 | SplitView3DInventor* viewer = new SplitView3DInventor(num_of_views, 0, 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ApplicationPy.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.cpp:57: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 47%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4Intersector1.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4Intersector1.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Intersector1.cpp [ 47%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/ArcOfCirclePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/ArcOfCirclePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ArcOfCirclePyImp.cpp [ 47%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4IntrLine3Box3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4IntrLine3Box3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4IntrLine3Box3.cpp [ 47%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4IntrLine3Plane3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4IntrLine3Plane3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4IntrLine3Plane3.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Part2DObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyGeometryList.cpp:41: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ArcPyImp.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ArcPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ArcPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 47%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4IntrSegment3Box3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4IntrSegment3Box3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4IntrSegment3Box3.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ArcOfCirclePyImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ArcOfCirclePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ArcOfCirclePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ArcOfConicPyImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ArcOfConicPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ArcOfConicPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 47%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4IntrSegment3Plane3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4IntrSegment3Plane3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4IntrSegment3Plane3.cpp [ 47%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/AutoSaver.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/AutoSaver.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp [ 47%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/ArcOfParabolaPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/ArcOfParabolaPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ArcOfParabolaPyImp.cpp [ 47%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4IntrTriangle2Triangle2.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4IntrTriangle2Triangle2.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4IntrTriangle2Triangle2.cpp [ 47%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/BodyBasePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/BodyBasePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BodyBasePyImp.cpp [ 47%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/ConicPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/ConicPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ConicPyImp.cpp [ 47%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4IntrTriangle3Triangle3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4IntrTriangle3Triangle3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4IntrTriangle3Triangle3.cpp [ 47%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/CirclePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/CirclePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/CirclePyImp.cpp [ 47%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/ArcOfEllipsePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/ArcOfEllipsePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ArcOfEllipsePyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ArcOfParabolaPyImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ArcOfParabolaPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ArcOfParabolaPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 47%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4LinearSystem.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4LinearSystem.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4LinearSystem.cpp [ 47%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/BitmapFactory.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/BitmapFactory.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BitmapFactory.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:32: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 47%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4Math.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4Math.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Math.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtension.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BodyBase.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BodyBasePyImp.cpp:26: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 47%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/EllipsePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/EllipsePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/EllipsePyImp.cpp [ 47%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4Matrix2.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4Matrix2.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Matrix2.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ConicPyImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ConicPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ConicPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ArcOfEllipsePyImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ArcOfEllipsePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ArcOfEllipsePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/CirclePyImp.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/CirclePy.cpp:92:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 92 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/CirclePy.cpp:92:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 47%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4Matrix3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4Matrix3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Matrix3.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BodyBasePyImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BodyBasePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BodyBasePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 47%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4Matrix4.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4Matrix4.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Matrix4.cpp [ 47%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/HyperbolaPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/HyperbolaPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/HyperbolaPyImp.cpp [ 47%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/ArcOfHyperbolaPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/ArcOfHyperbolaPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ArcOfHyperbolaPyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 47%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/ParabolaPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/ParabolaPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ParabolaPyImp.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BitmapFactory.cpp: In member function 'void Gui::BitmapFactoryInst::convert(const QImage&, SoSFImage&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BitmapFactory.cpp:624:34: warning: 'int QImage::byteCount() const' is deprecated: Use sizeInBytes [-Wdeprecated-declarations] 624 | int buffersize = p.byteCount(); | ^ In file included from /usr/include/qt5/QtGui/qpixmap.h:49, from /usr/include/qt5/QtGui/qbitmap.h:44, from /usr/include/qt5/QtGui/QBitmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BitmapFactory.cpp:27: /usr/include/qt5/QtGui/qimage.h:221:44: note: declared here 221 | QT_DEPRECATED_X("Use sizeInBytes") int byteCount() const; | ^~~~~~~~~ [ 47%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4Memory.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4Memory.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Memory.cpp [ 48%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4MeshCurvature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4MeshCurvature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.cpp [ 48%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/OffsetCurvePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/OffsetCurvePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/OffsetCurvePyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp: In member function 'void Gui::AutoSaver::saveDocument(const string&, Gui::AutoSaveProperty&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:137:64: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 137 | str << "" << endl | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:30: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:137:64: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 137 | str << "" << endl | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:30: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:138:60: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 138 | << "" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:30: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:138:60: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 138 | << "" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:30: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:139:52: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 139 | str << " Created" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:30: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:139:52: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 139 | str << " Created" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:30: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:140:93: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 140 | str << " " << endl; // store the document's current label | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:30: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:140:93: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 140 | str << " " << endl; // store the document's current label | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:30: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:141:102: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 141 | str << " " << QString::fromUtf8(doc->FileName.getValue()) << "" << endl; // store the document's current filename | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:30: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:141:102: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 141 | str << " " << QString::fromUtf8(doc->FileName.getValue()) << "" << endl; // store the document's current filename | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:30: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:142:41: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 142 | str << "" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:30: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:142:41: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 142 | str << "" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/AutoSaver.cpp:30: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.cpp: In instantiation of 'Wm4::MeshCurvature::MeshCurvature(int, const Wm4::Vector3*, int, const int*) [with Real = float]': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.cpp:274:7: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.cpp:34:11: warning: 'void* memset(void*, int, size_t)' clearing an object of type 'class Wm4::Vector3' with no trivial copy-assignment; use assignment or value-initialization instead [-Wclass-memaccess] 34 | memset(m_akNormal,0,m_iVQuantity*sizeof(Vector3)); | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Matrix3.h:55, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.cpp:18: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Vector3.h:27:7: note: 'class Wm4::Vector3' declared here 27 | class Vector3 | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.cpp:61:11: warning: 'void* memset(void*, int, size_t)' clearing an object of type 'class Wm4::Matrix3' with no trivial copy-assignment; use assignment or value-initialization instead [-Wclass-memaccess] 61 | memset(akWWTrn,0,m_iVQuantity*sizeof(Matrix3)); | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.cpp:18: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Matrix3.h:61:7: note: 'class Wm4::Matrix3' declared here 61 | class Matrix3 | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.cpp:62:11: warning: 'void* memset(void*, int, size_t)' clearing an object of type 'class Wm4::Matrix3' with no trivial copy-assignment; use assignment or value-initialization instead [-Wclass-memaccess] 62 | memset(akDWTrn,0,m_iVQuantity*sizeof(Matrix3)); | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.cpp:18: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Matrix3.h:61:7: note: 'class Wm4::Matrix3' declared here 61 | class Matrix3 | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.cpp: In instantiation of 'Wm4::MeshCurvature::MeshCurvature(int, const Wm4::Vector3*, int, const int*) [with Real = double]': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.cpp:277:7: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.cpp:34:11: warning: 'void* memset(void*, int, size_t)' clearing an object of type 'class Wm4::Vector3' with no trivial copy-assignment; use assignment or value-initialization instead [-Wclass-memaccess] 34 | memset(m_akNormal,0,m_iVQuantity*sizeof(Vector3)); | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Matrix3.h:55, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.cpp:18: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Vector3.h:27:7: note: 'class Wm4::Vector3' declared here 27 | class Vector3 | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.cpp:61:11: warning: 'void* memset(void*, int, size_t)' clearing an object of type 'class Wm4::Matrix3' with no trivial copy-assignment; use assignment or value-initialization instead [-Wclass-memaccess] 61 | memset(akWWTrn,0,m_iVQuantity*sizeof(Matrix3)); | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.cpp:18: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Matrix3.h:61:7: note: 'class Wm4::Matrix3' declared here 61 | class Matrix3 | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.cpp:62:11: warning: 'void* memset(void*, int, size_t)' clearing an object of type 'class Wm4::Matrix3' with no trivial copy-assignment; use assignment or value-initialization instead [-Wclass-memaccess] 62 | memset(akDWTrn,0,m_iVQuantity*sizeof(Matrix3)); | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshCurvature.cpp:18: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Matrix3.h:61:7: note: 'class Wm4::Matrix3' declared here 61 | class Matrix3 | ^~~~~~~ [ 48%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4MeshSmoother.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4MeshSmoother.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshSmoother.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshSmoother.cpp: In instantiation of 'void Wm4::MeshSmoother::Update(Real) [with Real = float]': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshSmoother.cpp:201:7: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshSmoother.cpp:92:11: warning: 'void* memset(void*, int, size_t)' clearing an object of type 'class Wm4::Vector3' with no trivial copy-assignment; use assignment or value-initialization instead [-Wclass-memaccess] 92 | memset(m_akNormal,0,m_iVQuantity*sizeof(Vector3)); | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshSmoother.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshSmoother.cpp:18: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Vector3.h:27:7: note: 'class Wm4::Vector3' declared here 27 | class Vector3 | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshSmoother.cpp:93:11: warning: 'void* memset(void*, int, size_t)' clearing an object of type 'class Wm4::Vector3' with no trivial copy-assignment; use assignment or value-initialization instead [-Wclass-memaccess] 93 | memset(m_akMean,0,m_iVQuantity*sizeof(Vector3)); | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshSmoother.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshSmoother.cpp:18: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Vector3.h:27:7: note: 'class Wm4::Vector3' declared here 27 | class Vector3 | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshSmoother.cpp: In instantiation of 'void Wm4::MeshSmoother::Update(Real) [with Real = double]': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshSmoother.cpp:204:7: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshSmoother.cpp:92:11: warning: 'void* memset(void*, int, size_t)' clearing an object of type 'class Wm4::Vector3' with no trivial copy-assignment; use assignment or value-initialization instead [-Wclass-memaccess] 92 | memset(m_akNormal,0,m_iVQuantity*sizeof(Vector3)); | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshSmoother.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshSmoother.cpp:18: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Vector3.h:27:7: note: 'class Wm4::Vector3' declared here 27 | class Vector3 | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshSmoother.cpp:93:11: warning: 'void* memset(void*, int, size_t)' clearing an object of type 'class Wm4::Vector3' with no trivial copy-assignment; use assignment or value-initialization instead [-Wclass-memaccess] 93 | memset(m_akMean,0,m_iVQuantity*sizeof(Vector3)); | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshSmoother.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4MeshSmoother.cpp:18: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Vector3.h:27:7: note: 'class Wm4::Vector3' declared here 27 | class Vector3 | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/EllipsePyImp.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/EllipsePy.cpp:96:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 96 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/EllipsePy.cpp:96:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 48%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4ParametricSurface.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4ParametricSurface.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4ParametricSurface.cpp [ 48%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Document.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Document.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp [ 48%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4PolynomialRoots.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4PolynomialRoots.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4PolynomialRoots.cpp [ 48%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/GeometryPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/GeometryPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/GeometryPyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/HyperbolaPyImp.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/HyperbolaPy.cpp:96:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 96 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/HyperbolaPy.cpp:96:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ArcOfHyperbolaPyImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ArcOfHyperbolaPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ArcOfHyperbolaPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ParabolaPyImp.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ParabolaPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ParabolaPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/OffsetCurvePyImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/OffsetCurvePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/OffsetCurvePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 48%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/GeometryCurvePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/GeometryCurvePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/GeometryCurvePyImp.cpp [ 48%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/BoundedCurvePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/BoundedCurvePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BoundedCurvePyImp.cpp [ 48%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4QuadricSurface.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4QuadricSurface.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4QuadricSurface.cpp [ 48%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/TrimmedCurvePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/TrimmedCurvePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/TrimmedCurvePyImp.cpp [ 48%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/GeometrySurfacePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/GeometrySurfacePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/GeometrySurfacePyImp.cpp [ 48%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DocumentModel.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DocumentModel.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentModel.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BoundedCurvePyImp.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BoundedCurvePy.cpp:78:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 78 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BoundedCurvePy.cpp:78:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:35: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/GeometryPyImp.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/GeometryPy.cpp:79:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 79 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/GeometryPy.cpp:79:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 48%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4Quaternion.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4Quaternion.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Quaternion.cpp [ 48%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/LinePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/LinePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/LinePyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/GeometryCurvePyImp.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/GeometryCurvePy.cpp:78:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 78 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/GeometryCurvePy.cpp:78:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 48%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4Surface.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4Surface.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Surface.cpp [ 48%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4System.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4System.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4System.cpp [ 48%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/LineSegmentPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/LineSegmentPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/LineSegmentPyImp.cpp In file included from /usr/include/string.h:519, from /usr/include/c++/10/cstring:42, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4System.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4System.cpp:18: In function 'char* strncpy(char*, const char*, size_t)', inlined from 'static char* Wm4::System::Strcpy(char*, size_t, const char*)' at /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4System.cpp:930:12: /usr/include/bits/string_fortified.h:91:34: warning: 'char* __builtin_strncpy(char*, const char*, long unsigned int)' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] 91 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest)); | ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4System.cpp: In static member function 'static char* Wm4::System::Strcpy(char*, size_t, const char*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4System.cpp:922:29: note: length computed here 922 | size_t uiSrcLen = strlen(acSrc); | ~~~~~~^~~~~~~ In file included from /usr/include/string.h:519, from /usr/include/c++/10/cstring:42, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4System.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4System.cpp:18: In function 'char* strncat(char*, const char*, size_t)', inlined from 'static char* Wm4::System::Strcat(char*, size_t, const char*)' at /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4System.cpp:965:12: /usr/include/bits/string_fortified.h:122:34: warning: 'char* __builtin_strncat(char*, const char*, long unsigned int)' specified bound depends on the length of the source argument [-Wstringop-overflow=] 122 | return __builtin___strncat_chk (__dest, __src, __len, __bos (__dest)); | ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4System.cpp: In static member function 'static char* Wm4::System::Strcat(char*, size_t, const char*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4System.cpp:955:29: note: length computed here 955 | size_t uiSrcLen = strlen(acSrc); | ~~~~~~^~~~~~~ [ 48%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4TriangulateEC.cpp.o In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/GeometrySurfacePyImp.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/GeometrySurfacePy.cpp:78:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 78 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/GeometrySurfacePy.cpp:78:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4TriangulateEC.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4TriangulateEC.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/TrimmedCurvePyImp.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TrimmedCurvePy.cpp:78:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 78 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TrimmedCurvePy.cpp:78:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentModel.cpp:29: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 48%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/PointPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/PointPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PointPyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qabstractbutton.h:43, from /usr/include/qt5/QtWidgets/QAbstractButton:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:60: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qabstractbutton.h:43, from /usr/include/qt5/QtWidgets/QAbstractButton:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:60: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qabstractbutton.h:43, from /usr/include/qt5/QtWidgets/QAbstractButton:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:60: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qabstractbutton.h:43, from /usr/include/qt5/QtWidgets/QAbstractButton:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qabstractbutton.h:43, from /usr/include/qt5/QtWidgets/QAbstractButton:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qabstractbutton.h:43, from /usr/include/qt5/QtWidgets/QAbstractButton:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qabstractbutton.h:43, from /usr/include/qt5/QtWidgets/QAbstractButton:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qabstractbutton.h:43, from /usr/include/qt5/QtWidgets/QAbstractButton:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qabstractbutton.h:43, from /usr/include/qt5/QtWidgets/QAbstractButton:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qabstractbutton.h:43, from /usr/include/qt5/QtWidgets/QAbstractButton:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qabstractbutton.h:43, from /usr/include/qt5/QtWidgets/QAbstractButton:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp: In member function 'bool Gui::Document::saveAs()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:688:92: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 688 | QString(), QString::fromLatin1("%1 %2 (*.FCStd)").arg(exe, QObject::tr("Document"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qabstractbutton.h:43, from /usr/include/qt5/QtWidgets/QAbstractButton:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp: In member function 'bool Gui::Document::saveCopy()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:723:102: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 723 | QString(), QObject::tr("%1 document (*.FCStd)").arg(exe)); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qabstractbutton.h:43, from /usr/include/qt5/QtWidgets/QAbstractButton:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 48%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/BezierCurvePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/BezierCurvePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BezierCurvePyImp.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp: In member function 'void Gui::Document::createView(const Base::Type&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:1104:87: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 1104 | View3DInventor* view3D = new View3DInventor(this, getMainWindow(), shareWidget); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qabstractbutton.h:43, from /usr/include/qt5/QtWidgets/QAbstractButton:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp: In member function 'Gui::MDIView* Gui::Document::cloneView(Gui::MDIView*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:1149:74: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 1149 | View3DInventor* view3D = new View3DInventor(this, getMainWindow()); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qabstractbutton.h:43, from /usr/include/qt5/QtWidgets/QAbstractButton:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/LineSegmentPyImp.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/LineSegmentPy.cpp:85:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 85 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/LineSegmentPy.cpp:85:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/LinePyImp.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/LinePy.cpp:85:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 85 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/LinePy.cpp:85:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentModel.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentModel.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentModel.cpp: In member function 'virtual Qt::ItemFlags Gui::DocumentModel::flags(const QModelIndex&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentModel.cpp:630:16: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::ItemFlag; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 630 | return 0; | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentModel.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 48%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/BSplineCurvePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/BSplineCurvePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BSplineCurvePyImp.cpp [ 48%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/PlanePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/PlanePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PlanePyImp.cpp [ 48%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4VEManifoldMesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4VEManifoldMesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4VEManifoldMesh.cpp [ 48%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DocumentPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DocumentPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentPyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PointPyImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/PointPy.cpp:85:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 85 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/PointPy.cpp:85:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 48%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4Vector2.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4Vector2.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Vector2.cpp [ 48%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4Vector3.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4Vector3.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Vector3.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BezierCurvePyImp.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BezierCurvePy.cpp:92:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 92 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BezierCurvePy.cpp:92:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 48%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/ConePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/ConePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ConePyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PlanePyImp.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/PlanePy.cpp:96:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 96 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/PlanePy.cpp:96:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 48%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/WildMagic4/Wm4Vector4.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/WildMagic4/Wm4Vector4.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/WildMagic4/Wm4Vector4.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BSplineCurvePyImp.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BSplineCurvePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BSplineCurvePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 48%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/AppMesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/AppMesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/AppMesh.cpp [ 48%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/CylinderPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/CylinderPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/CylinderPyImp.cpp [ 48%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/SpherePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/SpherePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/SpherePyImp.cpp [ 48%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DocumentObserver.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DocumentObserver.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentObserver.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentPyImp.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/DocumentObjectPy.h:8, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/GeoFeaturePy.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App/MeshFeaturePy.h:7, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/AppMesh.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentObserver.cpp:30: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ConePyImp.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ConePy.cpp:102:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 102 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ConePy.cpp:102:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentPyImp.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmainwindow.h:43, from /usr/include/qt5/QtWidgets/QMainWindow:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentPyImp.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentPyImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DocumentPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DocumentPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/SpherePyImp.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/SpherePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/SpherePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/CylinderPyImp.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/CylinderPy.cpp:92:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 92 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/CylinderPy.cpp:92:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 48%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/ToroidPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/ToroidPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ToroidPyImp.cpp [ 48%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/AppMeshPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/AppMeshPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/AppMeshPy.cpp [ 48%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/BezierSurfacePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/BezierSurfacePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BezierSurfacePyImp.cpp [ 48%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/BSplineSurfacePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/BSplineSurfacePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BSplineSurfacePyImp.cpp [ 49%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/OffsetSurfacePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/OffsetSurfacePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/OffsetSurfacePyImp.cpp /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ToroidPyImp.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ToroidPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/ToroidPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 49%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DocumentObserverPython.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DocumentObserverPython.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentObserverPython.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentObserver.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentObserver.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BSplineSurfacePyImp.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BSplineSurfacePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BSplineSurfacePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BezierSurfacePyImp.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BezierSurfacePy.cpp:79:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 79 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BezierSurfacePy.cpp:79:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 49%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ExpressionBinding.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ExpressionBinding.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/AppMeshPy.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 49%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/PlateSurfacePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/PlateSurfacePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PlateSurfacePyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/OffsetSurfacePyImp.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/OffsetSurfacePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/OffsetSurfacePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 49%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/RectangularTrimmedSurfacePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/RectangularTrimmedSurfacePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/RectangularTrimmedSurfacePyImp.cpp [ 49%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/SurfaceOfExtrusionPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/SurfaceOfExtrusionPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/SurfaceOfExtrusionPyImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.cpp:27: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 49%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/GraphicsViewZoom.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/GraphicsViewZoom.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphicsViewZoom.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentObserverPython.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PlateSurfacePyImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/PlateSurfacePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/PlateSurfacePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 49%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Exporter.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Exporter.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Exporter.cpp /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.cpp: In member function 'QPixmap Gui::ExpressionBinding::getIcon(const char*, const QSize&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.cpp:128:37: warning: 'static bool QPixmapCache::find(const QString&, QPixmap&)' is deprecated: Use bool find(const QString &, QPixmap *) instead [-Wdeprecated-declarations] 128 | if (QPixmapCache::find(key, icon)) | ^ In file included from /usr/include/qt5/QtGui/QPixmapCache:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.cpp:25: /usr/include/qt5/QtGui/qpixmapcache.h:81:17: note: declared here 81 | static bool find(const QString &key, QPixmap &pixmap); | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentObserverPython.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentObserverPython.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphicsViewZoom.cpp: In member function 'virtual bool GraphicsViewZoom::eventFilter(QObject*, QEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphicsViewZoom.cpp:82:36: warning: 'Qt::Orientation QWheelEvent::orientation() const' is deprecated: Use angleDelta() [-Wdeprecated-declarations] 82 | if (wheel_event->orientation() == Qt::Vertical) { | ^ In file included from /usr/include/qt5/QtGui/QMouseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphicsViewZoom.cpp:36: /usr/include/qt5/QtGui/qevent.h:222:28: note: declared here 222 | inline Qt::Orientation orientation() const { return qt4O; } | ^~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphicsViewZoom.cpp:83:44: warning: 'int QWheelEvent::delta() const' is deprecated: Use angleDelta() [-Wdeprecated-declarations] 83 | double angle = -wheel_event->delta(); | ^ In file included from /usr/include/qt5/QtGui/QMouseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphicsViewZoom.cpp:36: /usr/include/qt5/QtGui/qevent.h:219:16: note: declared here 219 | inline int delta() const { return qt4D; } | ^~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentObserverPython.cpp:29: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/SurfaceOfExtrusionPyImp.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/SurfaceOfExtrusionPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/SurfaceOfExtrusionPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 49%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ExpressionCompleter.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ExpressionCompleter.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionCompleter.cpp [ 49%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/SurfaceOfRevolutionPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/SurfaceOfRevolutionPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/SurfaceOfRevolutionPyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/RectangularTrimmedSurfacePyImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/RectangularTrimmedSurfacePy.cpp:86:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 86 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/RectangularTrimmedSurfacePy.cpp:86:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 49%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/GuiApplication.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/GuiApplication.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GuiApplication.cpp [ 49%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/PartFeaturePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/PartFeaturePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeaturePyImp.cpp [ 49%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/AttachExtensionPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/AttachExtensionPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/AttachExtensionPyImp.cpp [ 49%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Part2DObjectPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Part2DObjectPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Part2DObjectPyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/SurfaceOfRevolutionPyImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/SurfaceOfRevolutionPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/SurfaceOfRevolutionPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Exporter.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Exporter.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 49%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/AttachEnginePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/AttachEnginePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/AttachEnginePyImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionCompleter.cpp:10: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeaturePyImp.cpp:26: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/AttachExtension.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/AttachExtensionPyImp.cpp:4: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 49%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/GuiApplicationNativeEventAware.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/GuiApplicationNativeEventAware.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GuiApplicationNativeEventAware.cpp [ 49%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/GuiConsole.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/GuiConsole.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GuiConsole.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Part2DObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Part2DObjectPyImp.cpp:4: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeaturePyImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/PartFeaturePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/PartFeaturePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 49%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Macro.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Macro.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Macro.cpp [ 49%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Facet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Facet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Facet.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Part2DObjectPyImp.cpp:9: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Part2DObjectPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Part2DObjectPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 49%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/TopoShapePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/TopoShapePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/TopoShapePyImp.cpp [ 49%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/MergeDocuments.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/MergeDocuments.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MergeDocuments.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/AttachExtensionPyImp.cpp:11: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/AttachExtensionPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/AttachExtensionPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Attacher.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/AttachEnginePyImp.cpp:6: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 49%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/TopoShapeCompSolidPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/TopoShapeCompSolidPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/TopoShapeCompSolidPyImp.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MergeDocuments.cpp:26: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 49%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/FacetPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/FacetPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FacetPyImp.cpp [ 49%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/TopoShapeCompoundPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/TopoShapeCompoundPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/TopoShapeCompoundPyImp.cpp [ 49%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/resource.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/resource.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/resource.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/AttachEnginePyImp.cpp:16: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/AttachEnginePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/AttachEnginePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/TopoShapePyImp.cpp:84: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapePy.cpp:80:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 80 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapePy.cpp:80:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FacetPyImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App/FacetPy.cpp:82:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 82 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App/FacetPy.cpp:82:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/TopoShapeCompSolidPyImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeCompSolidPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeCompSolidPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 49%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Control.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Control.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Control.cpp [ 49%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/FeatureMeshCurvature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/FeatureMeshCurvature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshCurvature.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/TopoShapeCompoundPyImp.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeCompoundPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeCompoundPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 49%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/FeatureMeshDefects.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/FeatureMeshDefects.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshDefects.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MergeDocuments.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MergeDocuments.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/resource.cpp:27: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.h:115:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 115 | DlgPreferencesImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BitmapFactory.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/resource.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/resource.cpp:27: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.h:54:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 54 | DlgCustomizeImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BitmapFactory.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/resource.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 49%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SpaceballEvent.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SpaceballEvent.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SpaceballEvent.cpp [ 49%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/TopoShapeEdgePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/TopoShapeEdgePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/TopoShapeEdgePyImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/resource.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshCurvature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshCurvature.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettings3DView.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/resource.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BitmapFactory.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/resource.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettings3DView.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/resource.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BitmapFactory.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/resource.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettings3DView.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/resource.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BitmapFactory.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/resource.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettings3DView.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/resource.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BitmapFactory.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/resource.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettings3DView.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/resource.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BitmapFactory.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/resource.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/resource.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h: In member function 'void Gui::Dialog::Ui_DlgEditorSettings::setupUi(QWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h:214:38: warning: 'void QTextEdit::setTabStopWidth(int)' is deprecated [-Wdeprecated-declarations] 214 | textEdit1->setTabStopWidth(40); | ^ In file included from /usr/include/qt5/QtWidgets/qplaintextedit.h:44, from /usr/include/qt5/QtWidgets/QPlainTextEdit:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettings3DView.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/resource.cpp:33: /usr/include/qt5/QtWidgets/qtextedit.h:203:24: note: declared here 203 | QT_DEPRECATED void setTabStopWidth(int width); | ^~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Control.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Control.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 49%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/TopoShapeFacePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/TopoShapeFacePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/TopoShapeFacePyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/resource.cpp:27: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h: In instantiation of 'void* Gui::WidgetProducer::Produce() const [with CLASS = Gui::UrlLabel]': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:174:19: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:176:17: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 176 | return (new CLASS); | ~^~~~~~~~~~ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BitmapFactory.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/resource.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshDefects.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshDefects.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/TopoShapeEdgePyImp.cpp:88: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeEdgePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeEdgePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Control.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Control.cpp:36: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 50%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Thumbnail.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Thumbnail.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Thumbnail.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/TopoShapeFacePyImp.cpp:84: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeFacePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeFacePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 50%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/FeatureMeshExport.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/FeatureMeshExport.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshExport.cpp [ 50%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Utilities.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Utilities.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Utilities.cpp [ 50%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/FeatureMeshImport.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/FeatureMeshImport.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshImport.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Thumbnail.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Thumbnail.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Thumbnail.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Thumbnail.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Thumbnail.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Thumbnail.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Thumbnail.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Thumbnail.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Thumbnail.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Thumbnail.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Thumbnail.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Thumbnail.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 50%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/FeatureMeshSegmentByMesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/FeatureMeshSegmentByMesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshSegmentByMesh.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshExport.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshExport.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 50%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/FeatureMeshSetOperations.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/FeatureMeshSetOperations.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshSetOperations.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshImport.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshImport.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Thumbnail.cpp:37: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Utilities.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 50%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/TopoShapeShellPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/TopoShapeShellPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/TopoShapeShellPyImp.cpp [ 50%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/FeatureMeshSolid.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/FeatureMeshSolid.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshSolid.cpp [ 50%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/WaitCursor.cpp.o In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshSegmentByMesh.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshSegmentByMesh.cpp:37: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/WaitCursor.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WaitCursor.cpp [ 50%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/FeatureMeshTransform.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/FeatureMeshTransform.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshTransform.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshSetOperations.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshSetOperations.cpp:40: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 50%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/FeatureMeshTransformDemolding.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/FeatureMeshTransformDemolding.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshTransformDemolding.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/TopoShapeShellPyImp.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeShellPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeShellPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 50%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/TopoShapeSolidPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/TopoShapeSolidPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/TopoShapeSolidPyImp.cpp [ 50%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ManualAlignment.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ManualAlignment.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshSolid.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 50%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Mesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Mesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Mesh.cpp [ 50%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/TransactionObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/TransactionObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TransactionObject.cpp [ 50%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/TopoShapeVertexPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/TopoShapeVertexPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/TopoShapeVertexPyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/TopoShapeSolidPyImp.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeSolidPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeSolidPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:52: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshTransform.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshTransform.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshTransform.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshTransformDemolding.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/FeatureMeshTransformDemolding.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 50%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/MeshFeature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/MeshFeature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshFeature.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/TopoShapeVertexPyImp.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeVertexPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeVertexPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 50%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/TopoShapeWirePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/TopoShapeWirePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/TopoShapeWirePyImp.cpp /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 50%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/MeshFeaturePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/MeshFeaturePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshFeaturePyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.h:45:90: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 45 | AbstractSplitView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.h:111:103: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 111 | SplitView3DInventor(int views, Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 50%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/BRepOffsetAPI_MakePipeShellPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/BRepOffsetAPI_MakePipeShellPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BRepOffsetAPI_MakePipeShellPyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:345:86: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 345 | AlignmentView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0) | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp: In member function 'SoNode* Gui::AlignmentView::setupHeadUpDisplay(const QString&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:449:30: warning: 'int QFontMetrics::width(const QString&, int) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 449 | int w = fm.width(text); | ^ In file included from /usr/include/qt5/QtWidgets/qwidget.h:50, from /usr/include/qt5/QtWidgets/qaction.h:46, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:26: /usr/include/qt5/QtGui/qfontmetrics.h:106:9: note: declared here 106 | int width(const QString &, int len = -1) const; | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp: In member function 'void Gui::ManualAlignment::startAlignment(Base::Type)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:798:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 798 | myViewer = new AlignmentView(myDocument,Gui::getMainWindow()); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ManualAlignment.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 50%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/MeshPointPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/MeshPointPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshPointPyImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TransactionObject.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshFeature.cpp:38: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TransactionObject.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TransactionObject.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:117, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshFeature.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl: In instantiation of 'PyTypeObject App::FeaturePythonPyT::Type': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:99:68: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 29 | PyTypeObject FeaturePythonPyT::Type = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/TopoShapeWirePyImp.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeWirePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/TopoShapeWirePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BRepOffsetAPI_MakePipeShellPyImp.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BRepOffsetAPI_MakePipeShellPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/BRepOffsetAPI_MakePipeShellPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshPointPyImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App/MeshPointPy.cpp:82:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 82 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App/MeshPointPy.cpp:82:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshFeaturePyImp.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 50%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/WinNativeGestureRecognizers.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/WinNativeGestureRecognizers.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WinNativeGestureRecognizers.cpp [ 50%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/MeshProperties.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/MeshProperties.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshProperties.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshFeaturePyImp.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App/MeshFeaturePy.cpp:80:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 80 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App/MeshFeaturePy.cpp:80:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 50%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/MeshPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/MeshPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshPyImp.cpp [ 51%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/PreCompiled.cpp [ 51%] Building CXX object src/Mod/Mesh/App/CMakeFiles/Mesh.dir/Segment.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMesh_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/libkdtree -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Mesh.dir/Segment.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/Segment.cpp [ 51%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/moc_iisiconlabel.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/moc_iisiconlabel.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/iisTaskPanel/src/moc_iisiconlabel.cpp [ 51%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/moc_iistaskbox.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/moc_iistaskbox.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/iisTaskPanel/src/moc_iistaskbox.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshPyImp.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App/MeshPy.cpp:89:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 89 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App/MeshPy.cpp:89:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 51%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/PartPyCXX.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/PartPyCXX.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartPyCXX.cpp [ 51%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Geom2d/ArcOfCircle2dPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Geom2d/ArcOfCircle2dPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/ArcOfCircle2dPyImp.cpp [ 51%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/moc_iistaskgroup.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/moc_iistaskgroup.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/iisTaskPanel/src/moc_iistaskgroup.cpp [ 51%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Geom2d/ArcOfConic2dPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Geom2d/ArcOfConic2dPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/ArcOfConic2dPyImp.cpp [ 51%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Geom2d/ArcOfEllipse2dPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Geom2d/ArcOfEllipse2dPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/ArcOfEllipse2dPyImp.cpp [ 51%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/moc_iistaskheader.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/moc_iistaskheader.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/iisTaskPanel/src/moc_iistaskheader.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/ArcOfEllipse2dPyImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/ArcOfEllipse2dPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/ArcOfEllipse2dPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/ArcOfConic2dPyImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/ArcOfConic2dPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/ArcOfConic2dPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/ArcOfCircle2dPyImp.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/ArcOfCircle2dPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/ArcOfCircle2dPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 51%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/QSint/actionpanel/moc_actionbox.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/moc_actionbox.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/QSint/actionpanel/moc_actionbox.cpp [ 51%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/QSint/actionpanel/moc_actionlabel.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/moc_actionlabel.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/QSint/actionpanel/moc_actionlabel.cpp [ 51%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Geom2d/ArcOfHyperbola2dPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Geom2d/ArcOfHyperbola2dPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/ArcOfHyperbola2dPyImp.cpp [ 51%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Geom2d/ArcOfParabola2dPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Geom2d/ArcOfParabola2dPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/ArcOfParabola2dPyImp.cpp [ 51%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/QSint/actionpanel/moc_actiongroup.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/moc_actiongroup.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/QSint/actionpanel/moc_actiongroup.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/QSint/actionpanel/moc_actionbox.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/QSint/actionpanel/../../../../../src/Gui/QSint/actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/QSint/actionpanel/../../../../../src/Gui/QSint/actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/QSint/actionpanel/../../../../../src/Gui/QSint/actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/QSint/actionpanel/moc_actionbox.cpp:10: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 51%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/QSint/actionpanel/moc_actionpanel.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/moc_actionpanel.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/QSint/actionpanel/moc_actionpanel.cpp [ 51%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/QSint/actionpanel/moc_taskheader_p.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/moc_taskheader_p.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/QSint/actionpanel/moc_taskheader_p.cpp [ 51%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Geom2d/BezierCurve2dPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Geom2d/BezierCurve2dPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/BezierCurve2dPyImp.cpp [ 51%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/qrc_resource.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/qrc_resource.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/qrc_resource.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/ArcOfHyperbola2dPyImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/ArcOfHyperbola2dPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/ArcOfHyperbola2dPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 51%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/qrc_translation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/qrc_translation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/qrc_translation.cpp [ 51%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/qrc_iisTaskPanel.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/qrc_iisTaskPanel.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/qrc_iisTaskPanel.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/ArcOfParabola2dPyImp.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/ArcOfParabola2dPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/ArcOfParabola2dPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 51%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/qrc_schemes.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/qrc_schemes.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/qrc_schemes.cpp [ 51%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Geom2d/BSplineCurve2dPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Geom2d/BSplineCurve2dPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/BSplineCurve2dPyImp.cpp [ 51%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Geom2d/Circle2dPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Geom2d/Circle2dPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/Circle2dPyImp.cpp [ 51%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Action.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Action.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Action.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/BezierCurve2dPyImp.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/BezierCurve2dPy.cpp:80:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 80 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/BezierCurve2dPy.cpp:80:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 51%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Geom2d/Conic2dPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Geom2d/Conic2dPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/Conic2dPyImp.cpp [ 51%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Geom2d/Ellipse2dPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Geom2d/Ellipse2dPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/Ellipse2dPyImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Action.cpp:27: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/BSplineCurve2dPyImp.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/BSplineCurve2dPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/BSplineCurve2dPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 51%] Linking CXX shared library ../../../../Mod/Mesh/Mesh.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/Mesh.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,Mesh.so -o ../../../../Mod/Mesh/Mesh.so CMakeFiles/Mesh.dir/Core/Algorithm.cpp.o CMakeFiles/Mesh.dir/Core/Approximation.cpp.o CMakeFiles/Mesh.dir/Core/Builder.cpp.o CMakeFiles/Mesh.dir/Core/Curvature.cpp.o CMakeFiles/Mesh.dir/Core/Decimation.cpp.o CMakeFiles/Mesh.dir/Core/Definitions.cpp.o CMakeFiles/Mesh.dir/Core/Degeneration.cpp.o CMakeFiles/Mesh.dir/Core/Elements.cpp.o CMakeFiles/Mesh.dir/Core/Evaluation.cpp.o CMakeFiles/Mesh.dir/Core/Grid.cpp.o CMakeFiles/Mesh.dir/Core/Info.cpp.o CMakeFiles/Mesh.dir/Core/KDTree.cpp.o CMakeFiles/Mesh.dir/Core/MeshIO.cpp.o CMakeFiles/Mesh.dir/Core/MeshKernel.cpp.o CMakeFiles/Mesh.dir/Core/Projection.cpp.o CMakeFiles/Mesh.dir/Core/Segmentation.cpp.o CMakeFiles/Mesh.dir/Core/SetOperations.cpp.o CMakeFiles/Mesh.dir/Core/Smoothing.cpp.o CMakeFiles/Mesh.dir/Core/Tools.cpp.o CMakeFiles/Mesh.dir/Core/TopoAlgorithm.cpp.o CMakeFiles/Mesh.dir/Core/Triangulation.cpp.o CMakeFiles/Mesh.dir/Core/Trim.cpp.o CMakeFiles/Mesh.dir/Core/Visitor.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprCylinderFit3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprGaussPointsFit2.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprGaussPointsFit3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprLineFit3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprPlaneFit3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprPolyFit3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprQuadraticFit3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4ApprSphereFit3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4ContBox2.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4ContBox3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4ConvexHull.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4ConvexHull1.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4ConvexHull2.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4ConvexHull3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4DelPolygonEdge.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4DelPolyhedronFace.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4DelTetrahedron.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4DelTriangle.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4Delaunay.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4Delaunay1.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4Delaunay2.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4Delaunay3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4DistLine3Segment3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4DistLine3Triangle3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4DistSegment3Segment3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4DistSegment3Triangle3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4DistVector3Plane3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4DistVector3Segment3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4DistVector3Triangle3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4Distance.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4ETManifoldMesh.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4Eigen.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4FoundationPCH.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4ImplicitSurface.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4Intersector.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4Intersector1.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4IntrLine3Box3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4IntrLine3Plane3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4IntrSegment3Box3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4IntrSegment3Plane3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4IntrTriangle2Triangle2.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4IntrTriangle3Triangle3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4LinearSystem.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4Math.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4Matrix2.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4Matrix3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4Matrix4.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4Memory.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4MeshCurvature.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4MeshSmoother.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4ParametricSurface.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4PolynomialRoots.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4QuadricSurface.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4Quaternion.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4Surface.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4System.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4TriangulateEC.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4VEManifoldMesh.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4Vector2.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4Vector3.cpp.o CMakeFiles/Mesh.dir/WildMagic4/Wm4Vector4.cpp.o CMakeFiles/Mesh.dir/AppMesh.cpp.o CMakeFiles/Mesh.dir/AppMeshPy.cpp.o CMakeFiles/Mesh.dir/Exporter.cpp.o CMakeFiles/Mesh.dir/Facet.cpp.o CMakeFiles/Mesh.dir/FacetPyImp.cpp.o CMakeFiles/Mesh.dir/FeatureMeshCurvature.cpp.o CMakeFiles/Mesh.dir/FeatureMeshDefects.cpp.o CMakeFiles/Mesh.dir/FeatureMeshExport.cpp.o CMakeFiles/Mesh.dir/FeatureMeshImport.cpp.o CMakeFiles/Mesh.dir/FeatureMeshSegmentByMesh.cpp.o CMakeFiles/Mesh.dir/FeatureMeshSetOperations.cpp.o CMakeFiles/Mesh.dir/FeatureMeshSolid.cpp.o CMakeFiles/Mesh.dir/FeatureMeshTransform.cpp.o CMakeFiles/Mesh.dir/FeatureMeshTransformDemolding.cpp.o CMakeFiles/Mesh.dir/Mesh.cpp.o CMakeFiles/Mesh.dir/MeshFeature.cpp.o CMakeFiles/Mesh.dir/MeshFeaturePyImp.cpp.o CMakeFiles/Mesh.dir/MeshPointPyImp.cpp.o CMakeFiles/Mesh.dir/MeshProperties.cpp.o CMakeFiles/Mesh.dir/MeshPyImp.cpp.o CMakeFiles/Mesh.dir/PreCompiled.cpp.o CMakeFiles/Mesh.dir/Segment.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi -lpthread ../../../../lib/libFreeCADApp.so /usr/lib64/libQt5Concurrent.so.5.15.2 ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so -lpthread /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/Circle2dPyImp.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Circle2dPy.cpp:92:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 92 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Circle2dPy.cpp:92:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 51%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Geom2d/Geometry2dPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Geom2d/Geometry2dPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/Geometry2dPyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/Conic2dPyImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Conic2dPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Conic2dPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 51%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Geom2d/Curve2dPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Geom2d/Curve2dPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/Curve2dPyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Action.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qabstractitemview.h:43, from /usr/include/qt5/QtWidgets/QAbstractItemView:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Action.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Action.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qabstractitemview.h:43, from /usr/include/qt5/QtWidgets/QAbstractItemView:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Action.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Action.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qabstractitemview.h:43, from /usr/include/qt5/QtWidgets/QAbstractItemView:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Action.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/Ellipse2dPyImp.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Ellipse2dPy.cpp:94:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 94 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Ellipse2dPy.cpp:94:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Action.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qabstractitemview.h:43, from /usr/include/qt5/QtWidgets/QAbstractItemView:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Action.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Action.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qabstractitemview.h:43, from /usr/include/qt5/QtWidgets/QAbstractItemView:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Action.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 51%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Geom2d/Hyperbola2dPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Geom2d/Hyperbola2dPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/Hyperbola2dPyImp.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 51%] Built target Mesh [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Geom2d/Line2dPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Geom2d/Line2dPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/Line2dPyImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Action.cpp:27: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Geom2d/Line2dSegmentPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Geom2d/Line2dSegmentPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/Line2dSegmentPyImp.cpp [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Geom2d/OffsetCurve2dPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Geom2d/OffsetCurve2dPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/OffsetCurve2dPyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/Geometry2dPyImp.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Geometry2dPy.cpp:79:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 79 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Geometry2dPy.cpp:79:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/Curve2dPyImp.cpp:67: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Curve2dPy.cpp:78:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 78 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Curve2dPy.cpp:78:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/Hyperbola2dPyImp.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Hyperbola2dPy.cpp:94:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 94 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Hyperbola2dPy.cpp:94:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/Line2dPyImp.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Line2dPy.cpp:85:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 85 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Line2dPy.cpp:85:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/Line2dSegmentPyImp.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Line2dSegmentPy.cpp:85:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 85 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Line2dSegmentPy.cpp:85:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Geom2d/Parabola2dPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Geom2d/Parabola2dPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/Parabola2dPyImp.cpp [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Attacher.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Attacher.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Attacher.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/OffsetCurve2dPyImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/OffsetCurve2dPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/OffsetCurve2dPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/AppPart.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/AppPart.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/AppPart.cpp [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/AppPartPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/AppPartPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/AppPartPy.cpp [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/BRepOffsetAPI_MakeOffsetFix.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/BRepOffsetAPI_MakeOffsetFix.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BRepOffsetAPI_MakeOffsetFix.cpp [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/BSplineCurveBiArcs.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/BSplineCurveBiArcs.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BSplineCurveBiArcs.cpp [ 52%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ActionFunction.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ActionFunction.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActionFunction.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geom2d/Parabola2dPyImp.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Parabola2dPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App/Geom2d/Parabola2dPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Attacher.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Attacher.cpp:62: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/CrossSection.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/CrossSection.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/CrossSection.cpp [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Geometry.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Geometry.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geometry.cpp [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Geometry2d.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Geometry2d.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Geometry2d.cpp [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/ImportIges.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/ImportIges.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ImportIges.cpp [ 52%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Command.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/AppPart.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/ImportStep.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/ImportStep.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ImportStep.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/AppPartPy.cpp:103: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/AppPart.cpp:226:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 226 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/AppPart.cpp:226:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/AppPartPy.cpp: In member function 'Py::Object Part::Module::makeWireString(const Py::Tuple&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/AppPartPy.cpp:1696:41: warning: 'Py_ssize_t PyUnicode_GetSize(PyObject*)' is deprecated [-Wdeprecated-declarations] 1696 | pysize = PyUnicode_GetSize(p); | ^ In file included from /usr/include/python3.8/Python.h:97, from /usr/include/CXX/WrapPython.h:58, from /usr/include/CXX/Extensions.hxx:37, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/AppPartPy.cpp:84: /usr/include/python3.8/unicodeobject.h:177:43: note: declared here 177 | Py_DEPRECATED(3.3) PyAPI_FUNC(Py_ssize_t) PyUnicode_GetSize( | ^~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/AppPartPy.cpp:1700:46: warning: 'Py_ssize_t PyUnicode_GetSize(PyObject*)' is deprecated [-Wdeprecated-declarations] 1700 | pysize = PyUnicode_GetSize(intext); | ^ In file included from /usr/include/python3.8/Python.h:97, from /usr/include/CXX/WrapPython.h:58, from /usr/include/CXX/Extensions.hxx:37, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/AppPartPy.cpp:84: /usr/include/python3.8/unicodeobject.h:177:43: note: declared here 177 | Py_DEPRECATED(3.3) PyAPI_FUNC(Py_ssize_t) PyUnicode_GetSize( | ^~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ImportIges.cpp:58: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PreCompiled.cpp [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/ProgressIndicator.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/ProgressIndicator.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ProgressIndicator.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Command.cpp:39: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Command.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/TopoShape.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/TopoShape.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/TopoShape.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Command.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Command.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Command.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Command.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Command.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Command.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Command.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Command.cpp: In static member function 'static void Gui::Command::doCommand(Gui::Command::DoCmd_Type, const char*, ...)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Command.cpp:463:44: warning: 'QString& QString::vsprintf(const char*, va_list)' is deprecated: Use vasprintf(), arg() or QTextStream instead [-Wdeprecated-declarations] 463 | const QString cmd = s.vsprintf(sCmd, ap); | ^ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qstring.h:391:14: note: declared here 391 | QString &vsprintf(const char *format, va_list ap) Q_ATTRIBUTE_FORMAT_PRINTF(2, 0); | ^~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/ImportStep.cpp:74: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/edgecluster.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/edgecluster.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/edgecluster.cpp [ 52%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/CommandDoc.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/CommandDoc.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/modelRefine.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/modelRefine.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/modelRefine.cpp [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/Tools.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/Tools.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Tools.cpp [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FT2FC.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FT2FC.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FT2FC.cpp [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FaceMaker.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FaceMaker.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FaceMaker.cpp [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FaceMakerCheese.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FaceMakerCheese.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FaceMakerCheese.cpp [ 52%] Building CXX object src/Mod/Part/App/CMakeFiles/Part.dir/FaceMakerBullseye.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFCUseFreeType -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPart_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Part.dir/FaceMakerBullseye.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FaceMakerBullseye.cpp [ 52%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/CommandFeat.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/CommandFeat.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandFeat.cpp [ 52%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/CommandMacro.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/CommandMacro.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandMacro.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:44: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 52%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/CommandStd.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/CommandStd.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp [ 52%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/CommandWindow.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/CommandWindow.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandWindow.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:53: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:60: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectInformationImp.h:43:92: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 43 | DlgProjectInformationImp(App::Document* doc, QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectUtility.h:38:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 38 | DlgProjectUtility(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandFeat.cpp:26: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:84:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | LocationDialog(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:30: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.h:74:57: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 74 | Transform(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:44: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:49:57: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 49 | Placement(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:113:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 113 | DockablePlacement(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 52%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/CommandTest.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/CommandTest.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandTest.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:67: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:68: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:68: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:68: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:68: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:68: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:68: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 52%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/CommandView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/CommandView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp: In member function 'virtual void StdCmdOpen::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:140:77: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 140 | QObject::tr("Open document"), QString(), formatList, &selectedFilter); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp: In member function 'virtual void StdCmdImport::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:215:75: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 215 | QObject::tr("Import file"), QString(), formatList, &selectedFilter); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp: In member function 'virtual void StdCmdExport::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:292:75: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 292 | QObject::tr("Export file"), QString(), formatList, &selectedFilter); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp: In member function 'virtual void StdCmdProjectInfo::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:596:101: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 596 | Gui::Dialog::DlgProjectInformationImp dlg(getActiveGuiDocument()->getDocument(), getMainWindow()); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp: In member function 'virtual void StdCmdProjectUtil::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:625:55: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 625 | Gui::Dialog::DlgProjectUtility dlg(getMainWindow()); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandDoc.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandFeat.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandFeat.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgMacroExecute.h:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandMacro.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandMacro.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgMacroExecute.h:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandMacro.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandMacro.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgMacroExecute.h:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandMacro.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandMacro.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandMacro.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.h:43:67: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 43 | DlgMacroExecuteImp( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandMacro.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandMacro.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroRecordImp.h:44:66: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 44 | DlgMacroRecordImp( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandMacro.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandMacro.cpp: In member function 'virtual void StdCmdDlgMacroRecord::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandMacro.cpp:59:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 59 | Gui::Dialog::DlgMacroRecordImp cDlg(getMainWindow()); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandMacro.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandMacro.cpp: In member function 'virtual void StdCmdDlgMacroExecute::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandMacro.cpp:116:57: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 116 | Gui::Dialog::DlgMacroExecuteImp cDlg(getMainWindow()); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandMacro.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 52%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/CommandStructure.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/CommandStructure.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStructure.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:39: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 52%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Clipping.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Clipping.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:42: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 52%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DemoMode.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DemoMode.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.h:45:78: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 45 | SplashScreen( const QPixmap & pixmap = QPixmap ( ), Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.h:47:64: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 47 | DlgParameterImp( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:55: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.h:115:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 115 | DlgPreferencesImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.h:54:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 54 | DlgCustomizeImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandWindow.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 52%] Linking CXX shared library ../../../../Mod/Part/Part.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/Part.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,Part.so -o ../../../../Mod/Part/Part.so CMakeFiles/Part.dir/FeaturePartBoolean.cpp.o CMakeFiles/Part.dir/FeaturePartBox.cpp.o CMakeFiles/Part.dir/FeaturePartCircle.cpp.o CMakeFiles/Part.dir/FeaturePartCommon.cpp.o CMakeFiles/Part.dir/FeaturePartCurveNet.cpp.o CMakeFiles/Part.dir/FeaturePartCut.cpp.o CMakeFiles/Part.dir/FeaturePartFuse.cpp.o CMakeFiles/Part.dir/FeaturePartImportBrep.cpp.o CMakeFiles/Part.dir/FeaturePartImportIges.cpp.o CMakeFiles/Part.dir/FeaturePartImportStep.cpp.o CMakeFiles/Part.dir/FeaturePartPolygon.cpp.o CMakeFiles/Part.dir/FeaturePartSection.cpp.o CMakeFiles/Part.dir/FeaturePartSpline.cpp.o CMakeFiles/Part.dir/FeatureChamfer.cpp.o CMakeFiles/Part.dir/FeatureCompound.cpp.o CMakeFiles/Part.dir/FeatureExtrusion.cpp.o CMakeFiles/Part.dir/FeatureFace.cpp.o CMakeFiles/Part.dir/FeatureFillet.cpp.o CMakeFiles/Part.dir/FeatureMirroring.cpp.o CMakeFiles/Part.dir/FeatureRevolution.cpp.o CMakeFiles/Part.dir/FeatureOffset.cpp.o CMakeFiles/Part.dir/PartFeatures.cpp.o CMakeFiles/Part.dir/PartFeature.cpp.o CMakeFiles/Part.dir/PartFeatureReference.cpp.o CMakeFiles/Part.dir/Part2DObject.cpp.o CMakeFiles/Part.dir/PrimitiveFeature.cpp.o CMakeFiles/Part.dir/FeatureGeometrySet.cpp.o CMakeFiles/Part.dir/CustomFeature.cpp.o CMakeFiles/Part.dir/BodyBase.cpp.o CMakeFiles/Part.dir/DatumFeature.cpp.o CMakeFiles/Part.dir/AttachExtension.cpp.o CMakeFiles/Part.dir/PropertyTopoShape.cpp.o CMakeFiles/Part.dir/PropertyGeometryList.cpp.o CMakeFiles/Part.dir/ArcPyImp.cpp.o CMakeFiles/Part.dir/ArcOfConicPyImp.cpp.o CMakeFiles/Part.dir/ArcOfCirclePyImp.cpp.o CMakeFiles/Part.dir/ArcOfParabolaPyImp.cpp.o CMakeFiles/Part.dir/BodyBasePyImp.cpp.o CMakeFiles/Part.dir/ConicPyImp.cpp.o CMakeFiles/Part.dir/CirclePyImp.cpp.o CMakeFiles/Part.dir/ArcOfEllipsePyImp.cpp.o CMakeFiles/Part.dir/EllipsePyImp.cpp.o CMakeFiles/Part.dir/HyperbolaPyImp.cpp.o CMakeFiles/Part.dir/ArcOfHyperbolaPyImp.cpp.o CMakeFiles/Part.dir/ParabolaPyImp.cpp.o CMakeFiles/Part.dir/OffsetCurvePyImp.cpp.o CMakeFiles/Part.dir/GeometryPyImp.cpp.o CMakeFiles/Part.dir/GeometryCurvePyImp.cpp.o CMakeFiles/Part.dir/BoundedCurvePyImp.cpp.o CMakeFiles/Part.dir/TrimmedCurvePyImp.cpp.o CMakeFiles/Part.dir/GeometrySurfacePyImp.cpp.o CMakeFiles/Part.dir/LinePyImp.cpp.o CMakeFiles/Part.dir/LineSegmentPyImp.cpp.o CMakeFiles/Part.dir/PointPyImp.cpp.o CMakeFiles/Part.dir/BezierCurvePyImp.cpp.o CMakeFiles/Part.dir/BSplineCurvePyImp.cpp.o CMakeFiles/Part.dir/PlanePyImp.cpp.o CMakeFiles/Part.dir/ConePyImp.cpp.o CMakeFiles/Part.dir/CylinderPyImp.cpp.o CMakeFiles/Part.dir/SpherePyImp.cpp.o CMakeFiles/Part.dir/ToroidPyImp.cpp.o CMakeFiles/Part.dir/BezierSurfacePyImp.cpp.o CMakeFiles/Part.dir/BSplineSurfacePyImp.cpp.o CMakeFiles/Part.dir/OffsetSurfacePyImp.cpp.o CMakeFiles/Part.dir/PlateSurfacePyImp.cpp.o CMakeFiles/Part.dir/RectangularTrimmedSurfacePyImp.cpp.o CMakeFiles/Part.dir/SurfaceOfExtrusionPyImp.cpp.o CMakeFiles/Part.dir/SurfaceOfRevolutionPyImp.cpp.o CMakeFiles/Part.dir/PartFeaturePyImp.cpp.o CMakeFiles/Part.dir/AttachExtensionPyImp.cpp.o CMakeFiles/Part.dir/Part2DObjectPyImp.cpp.o CMakeFiles/Part.dir/AttachEnginePyImp.cpp.o CMakeFiles/Part.dir/TopoShapePyImp.cpp.o CMakeFiles/Part.dir/TopoShapeCompSolidPyImp.cpp.o CMakeFiles/Part.dir/TopoShapeCompoundPyImp.cpp.o CMakeFiles/Part.dir/TopoShapeEdgePyImp.cpp.o CMakeFiles/Part.dir/TopoShapeFacePyImp.cpp.o CMakeFiles/Part.dir/TopoShapeShellPyImp.cpp.o CMakeFiles/Part.dir/TopoShapeSolidPyImp.cpp.o CMakeFiles/Part.dir/TopoShapeVertexPyImp.cpp.o CMakeFiles/Part.dir/TopoShapeWirePyImp.cpp.o CMakeFiles/Part.dir/BRepOffsetAPI_MakePipeShellPyImp.cpp.o CMakeFiles/Part.dir/PartPyCXX.cpp.o CMakeFiles/Part.dir/Geom2d/ArcOfCircle2dPyImp.cpp.o CMakeFiles/Part.dir/Geom2d/ArcOfConic2dPyImp.cpp.o CMakeFiles/Part.dir/Geom2d/ArcOfEllipse2dPyImp.cpp.o CMakeFiles/Part.dir/Geom2d/ArcOfHyperbola2dPyImp.cpp.o CMakeFiles/Part.dir/Geom2d/ArcOfParabola2dPyImp.cpp.o CMakeFiles/Part.dir/Geom2d/BezierCurve2dPyImp.cpp.o CMakeFiles/Part.dir/Geom2d/BSplineCurve2dPyImp.cpp.o CMakeFiles/Part.dir/Geom2d/Circle2dPyImp.cpp.o CMakeFiles/Part.dir/Geom2d/Conic2dPyImp.cpp.o CMakeFiles/Part.dir/Geom2d/Ellipse2dPyImp.cpp.o CMakeFiles/Part.dir/Geom2d/Geometry2dPyImp.cpp.o CMakeFiles/Part.dir/Geom2d/Curve2dPyImp.cpp.o CMakeFiles/Part.dir/Geom2d/Hyperbola2dPyImp.cpp.o CMakeFiles/Part.dir/Geom2d/Line2dPyImp.cpp.o CMakeFiles/Part.dir/Geom2d/Line2dSegmentPyImp.cpp.o CMakeFiles/Part.dir/Geom2d/OffsetCurve2dPyImp.cpp.o CMakeFiles/Part.dir/Geom2d/Parabola2dPyImp.cpp.o CMakeFiles/Part.dir/Attacher.cpp.o CMakeFiles/Part.dir/AppPart.cpp.o CMakeFiles/Part.dir/AppPartPy.cpp.o CMakeFiles/Part.dir/BRepOffsetAPI_MakeOffsetFix.cpp.o CMakeFiles/Part.dir/BSplineCurveBiArcs.cpp.o CMakeFiles/Part.dir/CrossSection.cpp.o CMakeFiles/Part.dir/Geometry.cpp.o CMakeFiles/Part.dir/Geometry2d.cpp.o CMakeFiles/Part.dir/ImportIges.cpp.o CMakeFiles/Part.dir/ImportStep.cpp.o CMakeFiles/Part.dir/PreCompiled.cpp.o CMakeFiles/Part.dir/ProgressIndicator.cpp.o CMakeFiles/Part.dir/TopoShape.cpp.o CMakeFiles/Part.dir/edgecluster.cpp.o CMakeFiles/Part.dir/modelRefine.cpp.o CMakeFiles/Part.dir/Tools.cpp.o CMakeFiles/Part.dir/FT2FC.cpp.o CMakeFiles/Part.dir/FaceMaker.cpp.o CMakeFiles/Part.dir/FaceMakerCheese.cpp.o CMakeFiles/Part.dir/FaceMakerBullseye.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 ../../../../lib/libFreeCADApp.so /usr/lib64/libfreetype.so /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so -lpthread /usr/lib64/libz.so -lutil -ldl /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandTest.cpp:42: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgUnitsCalculatorImp.h:45:66: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 45 | DlgUnitsCalculator(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp: In member function 'virtual void StdCmdDlgParameter::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:313:54: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 313 | Gui::Dialog::DlgParameterImp cDlg(getMainWindow()); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp: In member function 'virtual void StdCmdDlgPreferences::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:345:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 345 | Gui::Dialog::DlgPreferencesImp cDlg(getMainWindow()); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp: In member function 'virtual void StdCmdDlgCustomize::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:371:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 371 | dlg = new Gui::Dialog::DlgCustomizeImp(getMainWindow()); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp: In member function 'virtual void StdCmdUnitsCalculator::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:715:97: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 715 | Gui::Dialog::DlgUnitsCalculator *dlg = new Gui::Dialog::DlgUnitsCalculator( getMainWindow() ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStd.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandWindow.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qcoreapplication.h:43, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandWindow.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandWindow.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActivateWindowImp.h:43:68: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 43 | DlgActivateWindowImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qcoreapplication.h:43, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandWindow.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandWindow.cpp: In member function 'virtual void StdCmdWindows::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandWindow.cpp:264:60: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 264 | Gui::Dialog::DlgActivateWindowImp dlg( getMainWindow() ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qcoreapplication.h:43, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandWindow.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandTest.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandTest.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:47: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgDisplayProperties.h:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgDisplayProperties.h:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.h:58:72: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 58 | DlgDisplayPropertiesImp( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtension.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Part.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStructure.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:66: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.h:74:60: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 74 | DlgInspector(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:67: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.h:47:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 47 | DemoMode(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:68: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.h:42:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 42 | TextureMapping(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp: In member function 'void StdCmdFreezeViews::onSaveViews()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:318:123: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 318 | QString(), QString::fromLatin1("%1 (*.cam)").arg(QObject::tr("Frozen views"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:327:60: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 327 | str << "" << endl | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:38: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:327:60: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 327 | str << "" << endl | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:38: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:328:55: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 328 | << "" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:38: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:328:55: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 328 | << "" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:38: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:329:61: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 329 | str << " " << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:38: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:329:61: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 329 | str << " " << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:38: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:346:93: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 346 | str << " " << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:38: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:346:93: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 346 | str << " " << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:38: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:349:32: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 349 | str << " " << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:38: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:349:32: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 349 | str << " " << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:38: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:350:36: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 350 | str << "" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:38: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:350:36: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 350 | str << "" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:38: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp: In member function 'void StdCmdFreezeViews::onRestoreViews()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:368:123: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 368 | QString(), QString::fromLatin1("%1 (*.cam)").arg(QObject::tr("Frozen views"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 52%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgActivateWindowImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgActivateWindowImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActivateWindowImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.h:47:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 47 | DemoMode(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcursor.h:43, from /usr/include/qt5/QtGui/QCursor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp: In member function 'virtual void StdCmdSetAppearance::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:1133:71: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 1133 | dlg = new Gui::Dialog::DlgDisplayPropertiesImp(getMainWindow()); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp: In member function 'virtual void StdViewScreenShot::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:1791:48: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 1791 | FileOptionsDialog fd(getMainWindow(), 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:1806:36: warning: 'void QFileDialog::setConfirmOverwrite(bool)' is deprecated: Use setOption(DontConfirmOverwrite, !enabled) instead [-Wdeprecated-declarations] 1806 | fd.setConfirmOverwrite(true); | ^ In file included from /usr/include/qt5/QtWidgets/QFileDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:48: /usr/include/qt5/QtWidgets/qfiledialog.h:177:10: note: declared here 177 | void setConfirmOverwrite(bool enabled); | ^~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:1851:96: warning: 'QStringList QString::split(const QString&, QString::SplitBehavior, Qt::CaseSensitivity) const' is deprecated: Use Qt::SplitBehavior variant instead [-Wdeprecated-declarations] 1851 | QStringList lines = comment.split(QLatin1String("\n"), QString::KeepEmptyParts ); | ^ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qstring.h:609:17: note: declared here 609 | QStringList split(const QString &sep, SplitBehavior behavior, | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:1881:58: warning: 'int QFontMetrics::width(const QString&, int) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 1881 | int n = QFontMetrics(font).width(name); | ^ In file included from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:35: /usr/include/qt5/QtGui/qfontmetrics.h:106:9: note: declared here 106 | int width(const QString &, int len = -1) const; | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:1888:57: warning: 'int QFontMetrics::width(const QString&, int) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 1888 | int u = QFontMetrics(font).width(url); | ^ In file included from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:35: /usr/include/qt5/QtGui/qfontmetrics.h:106:9: note: declared here 106 | int width(const QString &, int len = -1) const; | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp: In member function 'virtual void StdCmdSceneInspector::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:2750:64: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 2750 | dlg = new Gui::Dialog::DlgInspector(getMainWindow()); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp: In member function 'virtual void StdCmdDemoMode::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:2806:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 2806 | dlg = new Gui::Dialog::DemoMode(getMainWindow()); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 53%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgUnitsCalculatorImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgUnitsCalculatorImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgUnitsCalculatorImp.cpp [ 53%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgDisplayPropertiesImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgDisplayPropertiesImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStructure.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CommandStructure.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 55%] Built target Part /usr/bin/gmake -f src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/build.make src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/depend.internal". Scanning dependencies of target PartDesign gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/build.make src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 55%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/Feature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/Feature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/Feature.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.cpp:34: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgUnitsCalculatorImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgUnitsCalculatorImp.h:45:66: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 45 | DlgUnitsCalculator(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgUnitsCalculatorImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:27: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qsharedpointer.h:43, from /usr/include/qt5/QtCore/qpointer.h:43, from /usr/include/qt5/QtCore/QPointer:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qsharedpointer.h:43, from /usr/include/qt5/QtCore/qpointer.h:43, from /usr/include/qt5/QtCore/QPointer:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qsharedpointer.h:43, from /usr/include/qt5/QtCore/qpointer.h:43, from /usr/include/qt5/QtCore/QPointer:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qsharedpointer.h:43, from /usr/include/qt5/QtCore/qpointer.h:43, from /usr/include/qt5/QtCore/QPointer:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qsharedpointer.h:43, from /usr/include/qt5/QtCore/qpointer.h:43, from /usr/include/qt5/QtCore/QPointer:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qsharedpointer.h:43, from /usr/include/qt5/QtCore/qpointer.h:43, from /usr/include/qt5/QtCore/QPointer:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qsharedpointer.h:43, from /usr/include/qt5/QtCore/qpointer.h:43, from /usr/include/qt5/QtCore/QPointer:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qsharedpointer.h:43, from /usr/include/qt5/QtCore/qpointer.h:43, from /usr/include/qt5/QtCore/QPointer:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Clipping.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.cpp:37: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgUnitsCalculator.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgUnitsCalculatorImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgUnitsCalculatorImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgUnitsCalculator.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgUnitsCalculatorImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgUnitsCalculatorImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgInputDialogImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgInputDialogImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgInputDialogImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActivateWindowImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActivateWindowImp.h:43:68: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 43 | DlgActivateWindowImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActivateWindowImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcursor.h:43, from /usr/include/qt5/QtGui/QCursor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcursor.h:43, from /usr/include/qt5/QtGui/QCursor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcursor.h:43, from /usr/include/qt5/QtGui/QCursor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcursor.h:43, from /usr/include/qt5/QtGui/QCursor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcursor.h:43, from /usr/include/qt5/QtGui/QCursor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcursor.h:43, from /usr/include/qt5/QtGui/QCursor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcursor.h:43, from /usr/include/qt5/QtGui/QCursor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcursor.h:43, from /usr/include/qt5/QtGui/QCursor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DemoMode.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgMacroExecuteImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgMacroExecuteImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgUnitsCalculator.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgUnitsCalculatorImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgUnitsCalculatorImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgUnitsCalculator.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgUnitsCalculatorImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgUnitsCalculatorImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgUnitsCalculator.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgUnitsCalculatorImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgUnitsCalculatorImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgDisplayProperties.h:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgDisplayProperties.h:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/Feature.cpp:38: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 55%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeatureSolid.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeatureSolid.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureSolid.cpp [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgRunExternal.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgRunExternal.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgRunExternal.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:27: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActivateWindowImp.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:117, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/Feature.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl: In instantiation of 'PyTypeObject App::FeaturePythonPyT::Type': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:99:68: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 29 | PyTypeObject FeaturePythonPyT::Type = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActivateWindowImp.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActivateWindowImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.h:58:72: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 58 | DlgDisplayPropertiesImp( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMaterialPropertiesImp.h:40:96: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 40 | DlgMaterialPropertiesImp(const std::string& mat, QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgEditFileIncludeProptertyExternal.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgEditFileIncludeProptertyExternal.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgMacroExecute.h:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qinputdialog.h:43, from /usr/include/qt5/QtWidgets/QInputDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgMacroExecute.h:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qinputdialog.h:43, from /usr/include/qt5/QtWidgets/QInputDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgMacroExecute.h:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qinputdialog.h:43, from /usr/include/qt5/QtWidgets/QInputDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.h:43:67: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 43 | DlgMacroExecuteImp( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qinputdialog.h:43, from /usr/include/qt5/QtWidgets/QInputDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp: In member function 'void Gui::Dialog::DlgDisplayPropertiesImp::on_buttonUserDefinedMaterial_clicked()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:228:55: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 228 | DlgMaterialPropertiesImp dlg("ShapeMaterial", this); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp: In member function 'void Gui::Dialog::DlgDisplayPropertiesImp::on_buttonColorPlot_clicked()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:243:67: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 243 | dlg = new DlgMaterialPropertiesImp("TextureMaterial", this); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgDisplayPropertiesImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgMaterialPropertiesImp.cpp.o [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgMacroRecordImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgMacroRecordImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroRecordImp.cpp [ 55%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/Body.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/Body.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/Body.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgMaterialPropertiesImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMaterialPropertiesImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/Feature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureSolid.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureSolid.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgRunExternal.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgRunExternal.h:44:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 44 | DlgRunExternal(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qfiledialog.h:43, from /usr/include/qt5/QtWidgets/QFileDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgRunExternal.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgRunExternal.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qfiledialog.h:43, from /usr/include/qt5/QtWidgets/QFileDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgRunExternal.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgRunExternal.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qfiledialog.h:43, from /usr/include/qt5/QtWidgets/QFileDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgRunExternal.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgRunExternal.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qfiledialog.h:43, from /usr/include/qt5/QtWidgets/QFileDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgRunExternal.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/Body.cpp:27: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgParameterImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgParameterImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qinputdialog.h:43, from /usr/include/qt5/QtWidgets/QInputDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgRunExternal.h:44:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 44 | DlgRunExternal(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.cpp: In member function 'void Gui::Dialog::DlgMacroExecuteImp::on_createButton_clicked()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.cpp:337:37: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 337 | QLineEdit::Normal, QString::null, 0); | ^~~~ In file included from /usr/include/qt5/QtWidgets/qinputdialog.h:44, from /usr/include/qt5/QtWidgets/QInputDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.cpp:337:37: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 337 | QLineEdit::Normal, QString::null, 0); | ^~~~ In file included from /usr/include/qt5/QtWidgets/qinputdialog.h:44, from /usr/include/qt5/QtWidgets/QInputDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroExecuteImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.h:42:116: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 42 | DlgEditFileIncludePropertyExternal( App::PropertyFileIncluded& Prop, QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 55%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeatureBase.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeatureBase.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureBase.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroRecordImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroRecordImp.h:44:66: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 44 | DlgMacroRecordImp( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroRecordImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgMaterialProperties.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMaterialPropertiesImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMaterialPropertiesImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgMaterialProperties.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMaterialPropertiesImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMaterialPropertiesImp.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgMaterialProperties.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMaterialPropertiesImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMaterialPropertiesImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgMaterialProperties.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMaterialPropertiesImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMaterialPropertiesImp.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroRecordImp.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroRecordImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroRecordImp.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroRecordImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroRecordImp.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMacroRecordImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMaterialPropertiesImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMaterialPropertiesImp.h:40:96: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 40 | DlgMaterialPropertiesImp(const std::string& mat, QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgMaterialProperties.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMaterialPropertiesImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgMaterialPropertiesImp.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /usr/bin/gmake -f src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/build.make src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/depend.internal". [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgProjectInformationImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgProjectInformationImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectInformationImp.cpp Scanning dependencies of target Sketcher gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/build.make src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 55%] Building CXX object src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/SketchObjectSF.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSketcher_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/.. -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Sketcher.dir/SketchObjectSF.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/SketchObjectSF.cpp [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgProjectUtility.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgProjectUtility.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectUtility.cpp [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgPropertyLink.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgPropertyLink.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPropertyLink.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.h:47:64: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 47 | DlgParameterImp( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qrefcount.h:43, from /usr/include/qt5/QtCore/qbytearray.h:44, from /usr/include/qt5/QtCore/QByteArray:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qrefcount.h:43, from /usr/include/qt5/QtCore/qbytearray.h:44, from /usr/include/qt5/QtCore/QByteArray:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qrefcount.h:43, from /usr/include/qt5/QtCore/qbytearray.h:44, from /usr/include/qt5/QtCore/QByteArray:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qrefcount.h:43, from /usr/include/qt5/QtCore/qbytearray.h:44, from /usr/include/qt5/QtCore/QByteArray:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgExpressionInput.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgExpressionInput.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgExpressionInput.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtension.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BodyBase.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/Body.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureBase.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp: In member function 'void Gui::Dialog::DlgParameterImp::onChangeParameterSet(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:279:79: warning: 'QStringList QString::split(const QString&, QString::SplitBehavior, Qt::CaseSensitivity) const' is deprecated: Use Qt::SplitBehavior variant instead [-Wdeprecated-declarations] 279 | QStringList paths = path.split(QLatin1String("."), QString::SkipEmptyParts); | ^ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qdatastream.h:44, from /usr/include/qt5/QtGui/qregion.h:49, from /usr/include/qt5/QtGui/qevent.h:45, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:28: /usr/include/qt5/QtCore/qstring.h:609:17: note: declared here 609 | QStringList split(const QString &sep, SplitBehavior behavior, | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:291:49: warning: 'void QTreeWidget::setItemExpanded(const QTreeWidgetItem*, bool)' is deprecated: Use QTreeWidgetItem::setExpanded() instead [-Wdeprecated-declarations] 291 | paramGroup->setItemExpanded(parent, true); | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:33: /usr/include/qt5/QtWidgets/qtreewidget.h:337:10: note: declared here 337 | void setItemExpanded(const QTreeWidgetItem *item, bool expand); | ^~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp: In member function 'virtual void Gui::Dialog::ParameterGroup::contextMenuEvent(QContextMenuEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:366:28: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 366 | if (isItemSelected(item)) | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:33: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:372:33: warning: 'bool QTreeWidget::isItemExpanded(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isExpanded() instead [-Wdeprecated-declarations] 372 | if ( isItemExpanded(item) ) | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:33: /usr/include/qt5/QtWidgets/qtreewidget.h:335:10: note: declared here 335 | bool isItemExpanded(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp: In member function 'void Gui::Dialog::ParameterGroup::onDeleteSelectedItem()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:396:27: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 396 | if (isItemSelected(sel) && sel->parent()) | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:33: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp: In member function 'void Gui::Dialog::ParameterGroup::onToggleSelectedItem()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:415:27: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 415 | if (isItemSelected(sel)) | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:33: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:417:32: warning: 'bool QTreeWidget::isItemExpanded(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isExpanded() instead [-Wdeprecated-declarations] 417 | if ( isItemExpanded(sel) ) | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:33: /usr/include/qt5/QtWidgets/qtreewidget.h:335:10: note: declared here 335 | bool isItemExpanded(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:418:39: warning: 'void QTreeWidget::setItemExpanded(const QTreeWidgetItem*, bool)' is deprecated: Use QTreeWidgetItem::setExpanded() instead [-Wdeprecated-declarations] 418 | setItemExpanded(sel, false); | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:33: /usr/include/qt5/QtWidgets/qtreewidget.h:337:10: note: declared here 337 | void setItemExpanded(const QTreeWidgetItem *item, bool expand); | ^~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:420:38: warning: 'void QTreeWidget::setItemExpanded(const QTreeWidgetItem*, bool)' is deprecated: Use QTreeWidgetItem::setExpanded() instead [-Wdeprecated-declarations] 420 | setItemExpanded(sel, true); | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:33: /usr/include/qt5/QtWidgets/qtreewidget.h:337:10: note: declared here 337 | void setItemExpanded(const QTreeWidgetItem *item, bool expand); | ^~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp: In member function 'void Gui::Dialog::ParameterGroup::onCreateSubgroup()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:428:70: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 428 | QLineEdit::Normal, QString::null, &ok ); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qdatastream.h:44, from /usr/include/qt5/QtGui/qregion.h:49, from /usr/include/qt5/QtGui/qevent.h:45, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:28: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:428:70: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 428 | QLineEdit::Normal, QString::null, &ok ); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qdatastream.h:44, from /usr/include/qt5/QtGui/qregion.h:49, from /usr/include/qt5/QtGui/qevent.h:45, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:28: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:433:32: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 433 | if (isItemSelected(item)) | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:33: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp: In member function 'void Gui::Dialog::ParameterGroup::onExportToFile()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:455:18: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 455 | QString::null, QString::fromLatin1("XML (*.FCParam)")); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qdatastream.h:44, from /usr/include/qt5/QtGui/qregion.h:49, from /usr/include/qt5/QtGui/qevent.h:45, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:28: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:455:18: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 455 | QString::null, QString::fromLatin1("XML (*.FCParam)")); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qdatastream.h:44, from /usr/include/qt5/QtGui/qregion.h:49, from /usr/include/qt5/QtGui/qevent.h:45, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:28: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:455:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 455 | QString::null, QString::fromLatin1("XML (*.FCParam)")); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qrefcount.h:43, from /usr/include/qt5/QtCore/qbytearray.h:44, from /usr/include/qt5/QtCore/QByteArray:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:459:32: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 459 | if (isItemSelected(item)) | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:33: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp: In member function 'void Gui::Dialog::ParameterGroup::onImportFromFile()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:471:18: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 471 | QString::null, QString::fromLatin1("XML (*.FCParam)")); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qdatastream.h:44, from /usr/include/qt5/QtGui/qregion.h:49, from /usr/include/qt5/QtGui/qevent.h:45, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:28: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:471:18: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 471 | QString::null, QString::fromLatin1("XML (*.FCParam)")); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qdatastream.h:44, from /usr/include/qt5/QtGui/qregion.h:49, from /usr/include/qt5/QtGui/qevent.h:45, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:28: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:471:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 471 | QString::null, QString::fromLatin1("XML (*.FCParam)")); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qrefcount.h:43, from /usr/include/qt5/QtCore/qbytearray.h:44, from /usr/include/qt5/QtCore/QByteArray:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:475:32: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 475 | if (isItemSelected(item)) | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:33: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:496:57: warning: 'void QTreeWidget::setItemExpanded(const QTreeWidgetItem*, bool)' is deprecated: Use QTreeWidgetItem::setExpanded() instead [-Wdeprecated-declarations] 496 | setItemExpanded(para, para->childCount()); | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:33: /usr/include/qt5/QtWidgets/qtreewidget.h:337:10: note: declared here 337 | void setItemExpanded(const QTreeWidgetItem *item, bool expand); | ^~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp: In member function 'void Gui::Dialog::ParameterGroup::onRenameSelectedItem()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:509:27: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 509 | if (isItemSelected(sel)) | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:33: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp: In member function 'virtual void Gui::Dialog::ParameterValue::contextMenuEvent(QContextMenuEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:574:28: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 574 | if (isItemSelected(item)) | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:33: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp: In member function 'void Gui::Dialog::ParameterValue::onChangeSelectedItem(QTreeWidgetItem*, int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:595:28: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 595 | if (isItemSelected(item) && col > 0) | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:33: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp: In member function 'void Gui::Dialog::ParameterValue::onDeleteSelectedItem()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:609:27: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 609 | if (isItemSelected(sel)) | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:33: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp: In member function 'void Gui::Dialog::ParameterValue::onRenameSelectedItem()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:620:27: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 620 | if (isItemSelected(sel)) | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:33: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp: In member function 'void Gui::Dialog::ParameterValue::onCreateTextItem()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:630:70: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 630 | QLineEdit::Normal, QString::null, &ok); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qdatastream.h:44, from /usr/include/qt5/QtGui/qregion.h:49, from /usr/include/qt5/QtGui/qevent.h:45, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:28: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:630:70: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 630 | QLineEdit::Normal, QString::null, &ok); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qdatastream.h:44, from /usr/include/qt5/QtGui/qregion.h:49, from /usr/include/qt5/QtGui/qevent.h:45, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:28: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:646:69: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 646 | QLineEdit::Normal, QString::null, &ok); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qdatastream.h:44, from /usr/include/qt5/QtGui/qregion.h:49, from /usr/include/qt5/QtGui/qevent.h:45, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:28: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:646:69: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 646 | QLineEdit::Normal, QString::null, &ok); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qdatastream.h:44, from /usr/include/qt5/QtGui/qregion.h:49, from /usr/include/qt5/QtGui/qevent.h:45, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:28: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp: In member function 'void Gui::Dialog::ParameterValue::onCreateIntItem()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:659:70: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 659 | QLineEdit::Normal, QString::null, &ok); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qdatastream.h:44, from /usr/include/qt5/QtGui/qregion.h:49, from /usr/include/qt5/QtGui/qevent.h:45, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:28: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:659:70: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 659 | QLineEdit::Normal, QString::null, &ok); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qdatastream.h:44, from /usr/include/qt5/QtGui/qregion.h:49, from /usr/include/qt5/QtGui/qevent.h:45, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:28: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp: In member function 'void Gui::Dialog::ParameterValue::onCreateUIntItem()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:689:70: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 689 | QLineEdit::Normal, QString::null, &ok); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qdatastream.h:44, from /usr/include/qt5/QtGui/qregion.h:49, from /usr/include/qt5/QtGui/qevent.h:45, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:28: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:689:70: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 689 | QLineEdit::Normal, QString::null, &ok); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qdatastream.h:44, from /usr/include/qt5/QtGui/qregion.h:49, from /usr/include/qt5/QtGui/qevent.h:45, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:28: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp: In member function 'void Gui::Dialog::ParameterValue::onCreateFloatItem()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:725:70: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 725 | QLineEdit::Normal, QString::null, &ok); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qdatastream.h:44, from /usr/include/qt5/QtGui/qregion.h:49, from /usr/include/qt5/QtGui/qevent.h:45, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:28: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:725:70: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 725 | QLineEdit::Normal, QString::null, &ok); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qdatastream.h:44, from /usr/include/qt5/QtGui/qregion.h:49, from /usr/include/qt5/QtGui/qevent.h:45, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:28: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp: In member function 'void Gui::Dialog::ParameterValue::onCreateBoolItem()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:754:70: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 754 | QLineEdit::Normal, QString::null, &ok); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qdatastream.h:44, from /usr/include/qt5/QtGui/qregion.h:49, from /usr/include/qt5/QtGui/qevent.h:45, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:28: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:754:70: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 754 | QLineEdit::Normal, QString::null, &ok); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qdatastream.h:44, from /usr/include/qt5/QtGui/qregion.h:49, from /usr/include/qt5/QtGui/qevent.h:45, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:28: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp: In member function 'virtual QVariant Gui::Dialog::ParameterGroupItem::data(int, int) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:858:53: warning: 'bool QTreeWidget::isItemExpanded(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isExpanded() instead [-Wdeprecated-declarations] 858 | return treeWidget()->isItemExpanded(this) ? | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgParameterImp.cpp:33: /usr/include/qt5/QtWidgets/qtreewidget.h:335:10: note: declared here 335 | bool isItemExpanded(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/TaskDlgRelocation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/TaskDlgRelocation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskDlgRelocation.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectUtility.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectUtility.h:38:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 38 | DlgProjectUtility(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/qdir.h:43, from /usr/include/qt5/QtCore/QDir:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectUtility.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Part2DObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/SketchObjectSF.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/SketchObjectSF.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectInformationImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectInformationImp.h:43:92: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 43 | DlgProjectInformationImp(App::Document* doc, QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialog.h:43, from /usr/include/qt5/QtWidgets/QDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectInformationImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectInformationImp.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgProjectUtility.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectUtility.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/qdir.h:43, from /usr/include/qt5/QtCore/QDir:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectUtility.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgProjectUtility.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectUtility.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/qdir.h:43, from /usr/include/qt5/QtCore/QDir:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectUtility.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgProjectUtility.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectUtility.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/qdir.h:43, from /usr/include/qt5/QtCore/QDir:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectUtility.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 55%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/ShapeBinder.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/ShapeBinder.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/ShapeBinder.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectInformationImp.cpp:26: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgCheckableMessageBox.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgCheckableMessageBox.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCheckableMessageBox.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectInformationImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialog.h:43, from /usr/include/qt5/QtWidgets/QDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectInformationImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectInformationImp.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/ShapeBinder.cpp:27: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectInformationImp.cpp: In constructor 'Gui::Dialog::DlgProjectInformationImp::DlgProjectInformationImp(App::Document*, QWidget*, Qt::WindowFlags)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectInformationImp.cpp:94:84: warning: 'QStringList QString::split(const QString&, QString::SplitBehavior, Qt::CaseSensitivity) const' is deprecated: Use Qt::SplitBehavior variant instead [-Wdeprecated-declarations] 94 | QStringList lines = comment.split(QLatin1String("\\n"), QString::KeepEmptyParts); | ^ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qdialog.h:44, from /usr/include/qt5/QtWidgets/QDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectInformationImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectInformationImp.cpp:29: /usr/include/qt5/QtCore/qstring.h:609:17: note: declared here 609 | QStringList split(const QString &sep, SplitBehavior behavior, | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectInformationImp.cpp: In member function 'virtual void Gui::Dialog::DlgProjectInformationImp::accept()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectInformationImp.cpp:126:54: warning: 'QStringList QString::split(const QString&, QString::SplitBehavior, Qt::CaseSensitivity) const' is deprecated: Use Qt::SplitBehavior variant instead [-Wdeprecated-declarations] 126 | (QLatin1String("\n"), QString::KeepEmptyParts); | ^ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qdialog.h:44, from /usr/include/qt5/QtWidgets/QDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectInformationImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgProjectInformationImp.cpp:29: /usr/include/qt5/QtCore/qstring.h:609:17: note: declared here 609 | QStringList split(const QString &sep, SplitBehavior behavior, | ^~~~~ [ 55%] Building CXX object src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/SketchObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSketcher_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/.. -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Sketcher.dir/SketchObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/SketchObject.cpp [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/TaskCSysDragger.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/TaskCSysDragger.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskCSysDragger.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPropertyLink.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgExpressionInput.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgExpressionInput.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPropertyLink.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPropertyLink.h:38:88: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 38 | DlgPropertyLink(const QStringList& list, QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qlistwidget.h:43, from /usr/include/qt5/QtWidgets/QListWidgetItem:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPropertyLink.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgExpressionInput.cpp: In member function 'void Gui::Dialog::DlgExpressionInput::textChanged(const QString&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgExpressionInput.cpp:113:34: warning: 'int QFontMetrics::width(const QString&, int) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 113 | int width = fm.width(text) + 15; | ^ In file included from /usr/include/qt5/QtGui/qpainter.h:59, from /usr/include/qt5/QtGui/QPainter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgExpressionInput.cpp:25: /usr/include/qt5/QtGui/qfontmetrics.h:106:9: note: declared here 106 | int width(const QString &, int len = -1) const; | ^~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskDlgRelocation.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskDlgRelocation.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgUndoRedo.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgUndoRedo.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgUndoRedo.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskDlgRelocation.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskDlgRelocation.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgLocationPos.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskDlgRelocation.cpp:29: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/SketchObject.cpp:64: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCheckableMessageBox.cpp: In member function 'QPixmap Gui::Dialog::DlgCheckableMessageBox::iconPixmap() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCheckableMessageBox.cpp:136:56: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 136 | if (const QPixmap *p = m_d->ui.pixmapLabel->pixmap()) | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgCheckableMessageBox.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCheckableMessageBox.cpp:36: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/InputVector.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/InputVector.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskCSysDragger.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskCSysDragger.cpp:33: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ /usr/bin/gmake -f src/Mod/Raytracing/App/CMakeFiles/Raytracing.dir/build.make src/Mod/Raytracing/App/CMakeFiles/Raytracing.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 55%] FreeCADpov.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App && /usr/bin/python3 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Tools/PythonToCPP.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/App/FreeCADpov FreeCADpov.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App/CMakeFiles/Raytracing.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App/CMakeFiles/Raytracing.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App/CMakeFiles/Raytracing.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App/CMakeFiles/Raytracing.dir/depend.internal". Scanning dependencies of target Raytracing gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Raytracing/App/CMakeFiles/Raytracing.dir/build.make src/Mod/Raytracing/App/CMakeFiles/Raytracing.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 55%] Building CXX object src/Mod/Raytracing/App/CMakeFiles/Raytracing.dir/AppRaytracing.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRaytracing_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Raytracing.dir/AppRaytracing.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/App/AppRaytracing.cpp [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Placement.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Placement.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.cpp [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/PropertyPage.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/PropertyPage.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.cpp /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskCSysDragger.cpp:33: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcombobox.h:43, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcombobox.h:43, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/App/RayFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/App/AppRaytracing.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:84:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | LocationDialog(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcombobox.h:43, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskCSysDragger.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskCSysDragger.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 55%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/DatumPlane.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/DatumPlane.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/DatumPlane.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.cpp:27: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qwidget.h:43, from /usr/include/qt5/QtWidgets/QWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.cpp:27: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qwidget.h:43, from /usr/include/qt5/QtWidgets/QWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qsignalmapper.h:43, from /usr/include/qt5/QtCore/QSignalMapper:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qsignalmapper.h:43, from /usr/include/qt5/QtCore/QSignalMapper:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgUndoRedo.cpp:27: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.cpp:27: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qwidget.h:43, from /usr/include/qt5/QtWidgets/QWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.cpp:27: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qwidget.h:43, from /usr/include/qt5/QtWidgets/QWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.cpp:27: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qwidget.h:43, from /usr/include/qt5/QtWidgets/QWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.h:115:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 115 | DlgPreferencesImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qwidget.h:43, from /usr/include/qt5/QtWidgets/QWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.h:54:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 54 | DlgCustomizeImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qwidget.h:43, from /usr/include/qt5/QtWidgets/QWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:117, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/SketchObject.cpp:67: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl: In instantiation of 'PyTypeObject App::FeaturePythonPyT::Type': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:99:68: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 29 | PyTypeObject FeaturePythonPyT::Type = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:84:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | LocationDialog(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qsignalmapper.h:43, from /usr/include/qt5/QtCore/QSignalMapper:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgUndoRedo.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgUndoRedo.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgUndoRedo.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SceneInspector.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SceneInspector.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.cpp [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/TextureMapping.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/TextureMapping.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp [ 55%] Building CXX object src/Mod/Raytracing/App/CMakeFiles/Raytracing.dir/AppRaytracingPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRaytracing_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Raytracing.dir/AppRaytracingPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/App/AppRaytracingPy.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 55%] Building CXX object src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/SketchAnalysis.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSketcher_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/.. -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Sketcher.dir/SketchAnalysis.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/SketchAnalysis.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.cpp:30: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ /usr/bin/gmake -f src/Mod/Drawing/App/CMakeFiles/Drawing.dir/build.make src/Mod/Drawing/App/CMakeFiles/Drawing.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/App/CMakeFiles/Drawing.dir/DependInfo.cmake --color= In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.cpp:30: /usr/include/boost/bind.hpp: At global scope: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/App/CMakeFiles/Drawing.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/App/CMakeFiles/Drawing.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/App/CMakeFiles/Drawing.dir/depend.internal". In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:49:57: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 49 | Placement(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qsignalmapper.h:43, from /usr/include/qt5/QtCore/QSignalMapper:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:113:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 113 | DockablePlacement(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qsignalmapper.h:43, from /usr/include/qt5/QtCore/QSignalMapper:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ Scanning dependencies of target Drawing gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Drawing/App/CMakeFiles/Drawing.dir/build.make src/Mod/Drawing/App/CMakeFiles/Drawing.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 55%] Building CXX object src/Mod/Drawing/App/CMakeFiles/Drawing.dir/AppDrawing.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawing_EXPORTS -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Drawing.dir/AppDrawing.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/AppDrawing.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qsignalmapper.h:43, from /usr/include/qt5/QtCore/QSignalMapper:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.cpp: In constructor 'Gui::Dialog::TaskPlacement::TaskPlacement()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.cpp:760:28: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 760 | widget = new Placement(); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qsignalmapper.h:43, from /usr/include/qt5/QtCore/QSignalMapper:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/DatumFeature.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/DatumPlane.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/DatumPlane.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.h:74:60: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 74 | DlgInspector(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qheaderview.h:43, from /usr/include/qt5/QtWidgets/QHeaderView:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 55%] Building CXX object src/Mod/Raytracing/App/CMakeFiles/Raytracing.dir/PovTools.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRaytracing_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Raytracing.dir/PovTools.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/App/PovTools.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 56%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/DatumLine.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/DatumLine.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/DatumLine.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/SketchAnalysis.cpp:44: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qheaderview.h:43, from /usr/include/qt5/QtWidgets/QHeaderView:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qheaderview.h:43, from /usr/include/qt5/QtWidgets/QHeaderView:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qheaderview.h:43, from /usr/include/qt5/QtWidgets/QHeaderView:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qheaderview.h:43, from /usr/include/qt5/QtWidgets/QHeaderView:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qheaderview.h:43, from /usr/include/qt5/QtWidgets/QHeaderView:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qheaderview.h:43, from /usr/include/qt5/QtWidgets/QHeaderView:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qheaderview.h:43, from /usr/include/qt5/QtWidgets/QHeaderView:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qheaderview.h:43, from /usr/include/qt5/QtWidgets/QHeaderView:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SceneInspector.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectGroup.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/FeaturePage.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/AppDrawing.cpp:21: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 56%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Transform.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Transform.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:38: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 56%] Building CXX object src/Mod/Raytracing/App/CMakeFiles/Raytracing.dir/LuxTools.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRaytracing_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Raytracing.dir/LuxTools.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/App/LuxTools.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:40: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.h:42:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 42 | TextureMapping(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qimage.h:43, from /usr/include/qt5/QtGui/QImage:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_TextureMapping.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qimage.h:43, from /usr/include/qt5/QtGui/QImage:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_TextureMapping.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qimage.h:43, from /usr/include/qt5/QtGui/QImage:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_TextureMapping.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qimage.h:43, from /usr/include/qt5/QtGui/QImage:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 56%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DownloadItem.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DownloadItem.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qimage.h:43, from /usr/include/qt5/QtGui/QImage:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qimage.h:43, from /usr/include/qt5/QtGui/QImage:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qimage.h:43, from /usr/include/qt5/QtGui/QImage:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qimage.h:43, from /usr/include/qt5/QtGui/QImage:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qimage.h:43, from /usr/include/qt5/QtGui/QImage:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qimage.h:43, from /usr/include/qt5/QtGui/QImage:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qimage.h:43, from /usr/include/qt5/QtGui/QImage:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qimage.h:43, from /usr/include/qt5/QtGui/QImage:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp: In constructor 'Gui::Dialog::TaskTextureMapping::TaskTextureMapping()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:183:33: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 183 | dialog = new TextureMapping(); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qimage.h:43, from /usr/include/qt5/QtGui/QImage:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextureMapping.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/DatumFeature.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/DatumLine.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/DatumLine.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:43, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:43, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:84:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | LocationDialog(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:43, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 56%] Building CXX object src/Mod/Drawing/App/CMakeFiles/Drawing.dir/AppDrawingPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawing_EXPORTS -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Drawing.dir/AppDrawingPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/AppDrawingPy.cpp [ 56%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DownloadManager.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DownloadManager.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadManager.cpp [ 56%] Building CXX object src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/planegcs/GCS.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSketcher_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/.. -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Sketcher.dir/planegcs/GCS.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/planegcs/GCS.cpp [ 56%] Building CXX object src/Mod/Raytracing/App/CMakeFiles/Raytracing.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRaytracing_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Raytracing.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/App/PreCompiled.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 56%] Building CXX object src/Mod/Raytracing/App/CMakeFiles/Raytracing.dir/RayFeature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRaytracing_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Raytracing.dir/RayFeature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/App/RayFeature.cpp [ 56%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/DatumPoint.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/DatumPoint.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/DatumPoint.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.cpp:28: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.h:74:57: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 74 | Transform(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:43, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:43, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.cpp: In constructor 'Gui::Dialog::TaskTransform::TaskTransform()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.cpp:430:28: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 430 | dialog = new Transform(); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:43, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Transform.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 56%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DocumentRecovery.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DocumentRecovery.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/property_map/vector_property_map.hpp:14, from /usr/include/boost/property_map/property_map.hpp:602, from /usr/include/boost/graph/graph_concepts.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/planegcs/Constraints.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/planegcs/SubSystem.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/planegcs/GCS.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/planegcs/GCS.cpp:56: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp:47: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 56%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgActionsImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgActionsImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtNetwork/qtnetworkglobal.h:43, from /usr/include/qt5/QtNetwork/qauthenticator.h:43, from /usr/include/qt5/QtNetwork/QAuthenticator:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtNetwork/qtnetworkglobal.h:43, from /usr/include/qt5/QtNetwork/qauthenticator.h:43, from /usr/include/qt5/QtNetwork/QAuthenticator:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtNetwork/qtnetworkglobal.h:43, from /usr/include/qt5/QtNetwork/qauthenticator.h:43, from /usr/include/qt5/QtNetwork/QAuthenticator:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtNetwork/qtnetworkglobal.h:43, from /usr/include/qt5/QtNetwork/qauthenticator.h:43, from /usr/include/qt5/QtNetwork/QAuthenticator:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp: In member function 'virtual void SqueezeLabel::paintEvent(QPaintEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp:103:24: warning: 'int QFontMetrics::width(const QString&, int) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 103 | if (fm.width(text()) > contentsRect().width()) { | ^ In file included from /usr/include/qt5/QtWidgets/qwidget.h:50, from /usr/include/qt5/QtWidgets/qmenu.h:44, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp:31: /usr/include/qt5/QtGui/qfontmetrics.h:106:9: note: declared here 106 | int width(const QString &, int len = -1) const; | ^~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/App/RayFeature.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp: In member function 'void AutoSaver::changeOccurred()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp:133:29: warning: 'void QTime::start()' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 133 | m_firstChange.start(); | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp:49: /usr/include/qt5/QtCore/qdatetime.h:235:55: note: declared here 235 | QT_DEPRECATED_X("Use QElapsedTimer instead") void start(); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp:135:31: warning: 'int QTime::elapsed() const' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 135 | if (m_firstChange.elapsed() > MAXWAIT) { | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp:49: /usr/include/qt5/QtCore/qdatetime.h:237:54: note: declared here 237 | QT_DEPRECATED_X("Use QElapsedTimer instead") int elapsed() const; | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp: In member function 'void Gui::Dialog::DownloadItem::init()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp:279:26: warning: 'void QTime::start()' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 279 | m_downloadTime.start(); | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp:49: /usr/include/qt5/QtCore/qdatetime.h:235:55: note: declared here 235 | QT_DEPRECATED_X("Use QElapsedTimer instead") void start(); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp: In member function 'void Gui::Dialog::DownloadItem::updateInfoLabel()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp:563:70: warning: 'int QTime::elapsed() const' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 563 | double speed = m_bytesReceived * 1000.0 / m_downloadTime.elapsed(); | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DownloadItem.cpp:49: /usr/include/qt5/QtCore/qdatetime.h:237:54: note: declared here 237 | QT_DEPRECATED_X("Use QElapsedTimer instead") int elapsed() const; | ^~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/DatumPoint.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/DatumPoint.cpp:61: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 56%] Building CXX object src/Mod/Raytracing/App/CMakeFiles/Raytracing.dir/RayProject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRaytracing_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Raytracing.dir/RayProject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/App/RayProject.cpp [ 56%] Building CXX object src/Mod/Drawing/App/CMakeFiles/Drawing.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawing_EXPORTS -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Drawing.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/PreCompiled.cpp [ 56%] Building CXX object src/Mod/Drawing/App/CMakeFiles/Drawing.dir/FeaturePage.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawing_EXPORTS -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Drawing.dir/FeaturePage.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/FeaturePage.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgActions.h:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:43, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgActions.h:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:43, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /usr/bin/gmake -f src/Mod/Robot/App/CMakeFiles/Robot.dir/build.make src/Mod/Robot/App/CMakeFiles/Robot.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/CMakeFiles/Robot.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/CMakeFiles/Robot.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/CMakeFiles/Robot.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/CMakeFiles/Robot.dir/depend.internal". Scanning dependencies of target Robot gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Robot/App/CMakeFiles/Robot.dir/build.make src/Mod/Robot/App/CMakeFiles/Robot.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 56%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/RobotObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/RobotObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.cpp [ 56%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/DatumCS.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/DatumCS.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/DatumCS.cpp [ 56%] Building CXX object src/Mod/Raytracing/App/CMakeFiles/Raytracing.dir/RaySegment.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRaytracing_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Raytracing.dir/RaySegment.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/App/RaySegment.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp: In member function 'void Gui::Dialog::DlgCustomActionsImp::on_actionListWidget_itemActivated(QTreeWidgetItem*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:216:30: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 216 | m_sPixmap = QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:44, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:216:30: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 216 | m_sPixmap = QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:44, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp: In member function 'void Gui::Dialog::DlgCustomActionsImp::on_buttonAddAction_clicked()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:252:29: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 252 | if (pixmapLabel->pixmap()) | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgActions.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:39: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:253:47: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 253 | item->setIcon(0, *pixmapLabel->pixmap()); | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgActions.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:39: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:278:26: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 278 | m_sPixmap = QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:44, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:278:26: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 278 | m_sPixmap = QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:44, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp: In member function 'void Gui::Dialog::DlgCustomActionsImp::on_buttonReplaceAction_clicked()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:335:26: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 335 | m_sPixmap = QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:44, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:335:26: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 335 | m_sPixmap = QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:44, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp: In member function 'void Gui::Dialog::DlgCustomActionsImp::on_buttonChoosePixmap_clicked()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:501:26: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 501 | m_sPixmap = QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:44, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:501:26: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 501 | m_sPixmap = QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:44, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgActionsImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/App/RayProject.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:56: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/FeaturePage.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp: In member function 'void Gui::Dialog::DocumentRecoveryPrivate::writeRecoveryInfo(const Gui::Dialog::DocumentRecoveryPrivate::Info&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:321:60: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 321 | str << "" << endl | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:321:60: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 321 | str << "" << endl | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:322:56: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 322 | << "" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:322:56: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 322 | << "" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:325:52: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 325 | str << " Created" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:325:52: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 325 | str << " Created" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:328:55: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 328 | str << " Deprecated" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:328:55: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 328 | str << " Deprecated" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:331:52: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 331 | str << " Success" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:331:52: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 331 | str << " Success" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:334:52: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 334 | str << " Failure" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:334:52: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 334 | str << " Failure" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:337:52: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 337 | str << " Unknown" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:337:52: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 337 | str << " Unknown" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:340:59: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 340 | str << " " << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:340:59: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 340 | str << " " << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:341:68: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 341 | str << " " << info.fileName << "" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:341:68: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 341 | str << " " << info.fileName << "" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:342:37: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 342 | str << "" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:342:37: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 342 | str << "" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DocumentRecovery.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/App/RaySegment.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/App/RaySegment.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 56%] Building CXX object src/Mod/Raytracing/App/CMakeFiles/Raytracing.dir/LuxFeature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRaytracing_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Raytracing.dir/LuxFeature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/App/LuxFeature.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/DatumFeature.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/DatumCS.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/DatumCS.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 56%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgCommandsImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgCommandsImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCommandsImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 56%] Building CXX object src/Mod/Raytracing/App/CMakeFiles/Raytracing.dir/LuxProject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRaytracing_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Raytracing.dir/LuxProject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/App/LuxProject.cpp [ 56%] Building CXX object src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/planegcs/Geo.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSketcher_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/.. -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Sketcher.dir/planegcs/Geo.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/planegcs/Geo.cpp [ 56%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeatureTransformed.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeatureTransformed.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureTransformed.cpp [ 56%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/TrajectoryObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/TrajectoryObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryObject.cpp [ 56%] Building CXX object src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/planegcs/Constraints.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSketcher_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/.. -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Sketcher.dir/planegcs/Constraints.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/planegcs/Constraints.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/App/LuxFeature.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 56%] Building CXX object src/Mod/Drawing/App/CMakeFiles/Drawing.dir/FeatureProjection.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawing_EXPORTS -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Drawing.dir/FeatureProjection.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/FeatureProjection.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCommandsImp.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qheaderview.h:43, from /usr/include/qt5/QtWidgets/QHeaderView:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCommandsImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCommandsImp.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qheaderview.h:43, from /usr/include/qt5/QtWidgets/QHeaderView:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCommandsImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCommandsImp.cpp: In member function 'virtual void Gui::Dialog::DlgCustomCommandsImp::onModifyMacroAction(const QByteArray&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCommandsImp.cpp:247:59: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 247 | if (commandTreeWidget->isItemSelected(item)) | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgCommands.h:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCommandsImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCommandsImp.cpp:32: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/App/LuxProject.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 56%] Building CXX object src/Mod/Drawing/App/CMakeFiles/Drawing.dir/FeatureView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawing_EXPORTS -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Drawing.dir/FeatureView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/FeatureView.cpp [ 56%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgCustomizeImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgCustomizeImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryObject.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /usr/bin/gmake -f src/Mod/ReverseEngineering/App/CMakeFiles/ReverseEngineering.dir/build.make src/Mod/ReverseEngineering/App/CMakeFiles/ReverseEngineering.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/App/CMakeFiles/ReverseEngineering.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/App/CMakeFiles/ReverseEngineering.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/App/CMakeFiles/ReverseEngineering.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/App/CMakeFiles/ReverseEngineering.dir/depend.internal". Scanning dependencies of target ReverseEngineering gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/ReverseEngineering/App/CMakeFiles/ReverseEngineering.dir/build.make src/Mod/ReverseEngineering/App/CMakeFiles/ReverseEngineering.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 56%] Building CXX object src/Mod/ReverseEngineering/App/CMakeFiles/ReverseEngineering.dir/AppReverseEngineering.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DReverseEngineering_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ReverseEngineering.dir/AppReverseEngineering.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/App/AppReverseEngineering.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryObject.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryObject.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryObject.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/Feature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureTransformed.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureTransformed.cpp:40: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/FeatureProjection.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/FeatureProjection.cpp:39: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.h:54:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 54 | DlgCustomizeImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qcoreevent.h:43, from /usr/include/qt5/QtCore/QEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.h:115:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 115 | DlgPreferencesImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qcoreevent.h:43, from /usr/include/qt5/QtCore/QEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 56%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/TrajectoryDressUpObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/TrajectoryDressUpObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryDressUpObject.cpp [ 56%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgCustomizeSpaceball.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgCustomizeSpaceball.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeSpaceball.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/FeatureView.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/FeatureView.cpp:37: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 56%] Linking CXX shared library ../../../../Mod/Raytracing/Raytracing.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/Raytracing.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,Raytracing.so -o ../../../../Mod/Raytracing/Raytracing.so CMakeFiles/Raytracing.dir/AppRaytracing.cpp.o CMakeFiles/Raytracing.dir/AppRaytracingPy.cpp.o CMakeFiles/Raytracing.dir/PovTools.cpp.o CMakeFiles/Raytracing.dir/LuxTools.cpp.o CMakeFiles/Raytracing.dir/PreCompiled.cpp.o CMakeFiles/Raytracing.dir/RayFeature.cpp.o CMakeFiles/Raytracing.dir/RayProject.cpp.o CMakeFiles/Raytracing.dir/RaySegment.cpp.o CMakeFiles/Raytracing.dir/LuxFeature.cpp.o CMakeFiles/Raytracing.dir/LuxProject.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Part/Part.so /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 ../../../../lib/libFreeCADApp.so /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so -lpthread /usr/lib64/libz.so -lutil -ldl /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libfreetype.so [ 56%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgCustomizeSpNavSettings.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgCustomizeSpNavSettings.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeSpNavSettings.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 56%] Built target Raytracing /usr/bin/gmake -f src/Mod/MeshPart/App/CMakeFiles/MeshPart.dir/build.make src/Mod/MeshPart/App/CMakeFiles/MeshPart.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 56%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/MeshPart/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/MeshPart/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/App/CMakeFiles/MeshPart.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/App/CMakeFiles/MeshPart.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/App/CMakeFiles/MeshPart.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/App/CMakeFiles/MeshPart.dir/depend.internal". Scanning dependencies of target MeshPart gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/MeshPart/App/CMakeFiles/MeshPart.dir/build.make src/Mod/MeshPart/App/CMakeFiles/MeshPart.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 56%] Building CXX object src/Mod/MeshPart/App/CMakeFiles/MeshPart.dir/AppMeshPart.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_MEFISTO -DHAVE_SMESH -DHAVE_TBB -DHAVE_VTK -DMeshPart_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshPart.dir/AppMeshPart.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/App/AppMeshPart.cpp [ 56%] Building CXX object src/Mod/ReverseEngineering/App/CMakeFiles/ReverseEngineering.dir/ApproxSurface.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DReverseEngineering_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ReverseEngineering.dir/ApproxSurface.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/App/ApproxSurface.cpp [ 56%] Building CXX object src/Mod/MeshPart/App/CMakeFiles/MeshPart.dir/AppMeshPartPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_MEFISTO -DHAVE_SMESH -DHAVE_TBB -DHAVE_VTK -DMeshPart_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshPart.dir/AppMeshPartPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/App/AppMeshPartPy.cpp [ 56%] Building CXX object src/Mod/Drawing/App/CMakeFiles/Drawing.dir/FeatureViewPart.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawing_EXPORTS -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Drawing.dir/FeatureViewPart.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/FeatureViewPart.cpp [ 56%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeatureMirrored.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeatureMirrored.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureMirrored.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/App/AppMeshPartPy.cpp: In member function 'Py::Object MeshPart::Module::wireFromSegment(const Py::Tuple&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/App/AppMeshPartPy.cpp:207:33: warning: comparison of integer expressions of different signedness: 'unsigned int' and 'Py::SeqBase::size_type' {aka 'int'} [-Wsign-compare] 207 | for (unsigned int i=0; i instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/App/ApproxSurface.cpp:33: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 56%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/TrajectoryCompound.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/TrajectoryCompound.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryCompound.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryDressUpObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryDressUpObject.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryDressUpObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryDressUpObject.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryDressUpObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryDressUpObject.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 56%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgKeyboardImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgKeyboardImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgKeyboardImp.cpp [ 56%] Building CXX object src/Mod/MeshPart/App/CMakeFiles/MeshPart.dir/CurveProjector.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_MEFISTO -DHAVE_SMESH -DHAVE_TBB -DHAVE_VTK -DMeshPart_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshPart.dir/CurveProjector.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/App/CurveProjector.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/FeatureViewPart.cpp:59: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginFeature.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureMirrored.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 56%] Building CXX object src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/planegcs/SubSystem.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSketcher_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/.. -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Sketcher.dir/planegcs/SubSystem.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/planegcs/SubSystem.cpp [ 56%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/Edge2TracObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/Edge2TracObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Edge2TracObject.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgKeyboard.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgKeyboardImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgKeyboardImp.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgKeyboardImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgKeyboard.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgKeyboardImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgKeyboardImp.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgKeyboardImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 56%] Building CXX object src/Mod/ReverseEngineering/App/CMakeFiles/ReverseEngineering.dir/BSplineFitting.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DReverseEngineering_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ReverseEngineering.dir/BSplineFitting.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/App/BSplineFitting.cpp [ 56%] Building CXX object src/Mod/ReverseEngineering/App/CMakeFiles/ReverseEngineering.dir/RegionGrowing.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DReverseEngineering_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ReverseEngineering.dir/RegionGrowing.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/App/RegionGrowing.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryCompound.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryCompound.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgKeyboardImp.cpp: In member function 'virtual void Gui::Dialog::DlgCustomKeyboardImp::onModifyMacroAction(const QByteArray&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgKeyboardImp.cpp:491:59: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 491 | if (commandTreeWidget->isItemSelected(item)) | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgKeyboard.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgKeyboardImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgKeyboardImp.cpp:33: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ [ 56%] Building CXX object src/Mod/Drawing/App/CMakeFiles/Drawing.dir/FeatureViewAnnotation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawing_EXPORTS -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Drawing.dir/FeatureViewAnnotation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/FeatureViewAnnotation.cpp [ 56%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeatureLinearPattern.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeatureLinearPattern.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureLinearPattern.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryCompound.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryCompound.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryCompound.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryCompound.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryCompound.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryCompound.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 56%] Building CXX object src/Mod/MeshPart/App/CMakeFiles/MeshPart.dir/MeshAlgos.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_MEFISTO -DHAVE_SMESH -DHAVE_TBB -DHAVE_VTK -DMeshPart_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshPart.dir/MeshAlgos.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/App/MeshAlgos.cpp [ 56%] Building CXX object src/Mod/ReverseEngineering/App/CMakeFiles/ReverseEngineering.dir/SampleConsensus.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DReverseEngineering_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ReverseEngineering.dir/SampleConsensus.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/App/SampleConsensus.cpp [ 56%] Building CXX object src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/planegcs/qp_eq.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSketcher_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/.. -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Sketcher.dir/planegcs/qp_eq.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/planegcs/qp_eq.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Edge2TracObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Edge2TracObject.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 56%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgToolbarsImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgToolbarsImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp [ 56%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/PropertyTrajectory.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/PropertyTrajectory.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/PropertyTrajectory.cpp [ 56%] Building CXX object src/Mod/ReverseEngineering/App/CMakeFiles/ReverseEngineering.dir/Segmentation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DReverseEngineering_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ReverseEngineering.dir/Segmentation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/App/Segmentation.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Edge2TracObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Edge2TracObject.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Edge2TracObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Edge2TracObject.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Edge2TracObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Edge2TracObject.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/FeatureViewAnnotation.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/FeatureViewAnnotation.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/PropertyTrajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/PropertyTrajectory.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/PropertyTrajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/PropertyTrajectory.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/PropertyTrajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/PropertyTrajectory.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 56%] Building CXX object src/Mod/MeshPart/App/CMakeFiles/MeshPart.dir/Mesher.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_MEFISTO -DHAVE_SMESH -DHAVE_TBB -DHAVE_VTK -DMeshPart_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshPart.dir/Mesher.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/App/Mesher.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/Feature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureTransformed.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureLinearPattern.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureLinearPattern.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 56%] Building CXX object src/Mod/ReverseEngineering/App/CMakeFiles/ReverseEngineering.dir/SurfaceTriangulation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DReverseEngineering_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ReverseEngineering.dir/SurfaceTriangulation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/App/SurfaceTriangulation.cpp [ 56%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/RobotAlgos.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/RobotAlgos.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotAlgos.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotAlgos.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotAlgos.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotAlgos.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotAlgos.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:150:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 150 | explicit RotationVel(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotAlgos.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotAlgos.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:151:64: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 151 | RotationVel(const Rotation& _R,const Vector& _w):R(_R),w(_w){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotAlgos.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotAlgos.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In member function 'KDL::Rotation KDL::RotationVel::value() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:154:37: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 154 | Rotation value() const { return R;} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotAlgos.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotAlgos.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' is deprecated [-Wdeprecated-copy] 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:158:26: note: because 'KDL::RotationVel' has user-provided 'KDL::RotationVel& KDL::RotationVel::operator=(const KDL::RotationVel&)' 158 | IMETHOD RotationVel& operator = (const RotationVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In copy constructor 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:139:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 139 | class RotationVel | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotAlgos.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotAlgos.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: note: synthesized method 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' first required here 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::TwistVel::TwistVel(const KDL::VectorVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotAlgos.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:118:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 118 | explicit RotationAcc(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotAlgos.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotAlgos.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&, const KDL::Vector&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:120:27: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 120 | R(_R),w(_w),dw(_dw) {} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotAlgos.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotAlgos.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' is deprecated [-Wdeprecated-copy] 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:121:26: note: because 'KDL::RotationAcc' has user-provided 'KDL::RotationAcc& KDL::RotationAcc::operator=(const KDL::RotationAcc&)' 121 | IMETHOD RotationAcc& operator = (const RotationAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In copy constructor 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:110:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 110 | class RotationAcc | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotAlgos.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotAlgos.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: note: synthesized method 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' first required here 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::TwistAcc::TwistAcc(const KDL::VectorAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:267, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotAlgos.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:233:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 233 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:241:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 241 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:251:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 251 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:263:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 263 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ [ 56%] Building CXX object src/Mod/Drawing/App/CMakeFiles/Drawing.dir/FeatureViewSymbol.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawing_EXPORTS -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Drawing.dir/FeatureViewSymbol.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/FeatureViewSymbol.cpp [ 56%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/Robot6Axis.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/Robot6Axis.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.cpp [ 56%] Building CXX object src/Mod/ReverseEngineering/App/CMakeFiles/ReverseEngineering.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DReverseEngineering_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ReverseEngineering.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/App/PreCompiled.cpp [ 56%] Linking CXX shared library ../../../../Mod/ReverseEngineering/ReverseEngineering.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/ReverseEngineering.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,ReverseEngineering.so -o ../../../../Mod/ReverseEngineering/ReverseEngineering.so CMakeFiles/ReverseEngineering.dir/AppReverseEngineering.cpp.o CMakeFiles/ReverseEngineering.dir/ApproxSurface.cpp.o CMakeFiles/ReverseEngineering.dir/BSplineFitting.cpp.o CMakeFiles/ReverseEngineering.dir/RegionGrowing.cpp.o CMakeFiles/ReverseEngineering.dir/SampleConsensus.cpp.o CMakeFiles/ReverseEngineering.dir/Segmentation.cpp.o CMakeFiles/ReverseEngineering.dir/SurfaceTriangulation.cpp.o CMakeFiles/ReverseEngineering.dir/PreCompiled.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Mesh:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Points:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Part/Part.so ../../../../Mod/Mesh/Mesh.so ../../../../Mod/Points/Points.so ../../../../lib/libFreeCADApp.so /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so /usr/lib64/libfreetype.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so -lpthread /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Concurrent.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 [ 56%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeaturePolarPattern.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeaturePolarPattern.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeaturePolarPattern.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qinputdialog.h:43, from /usr/include/qt5/QtWidgets/QInputDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qinputdialog.h:43, from /usr/include/qt5/QtWidgets/QInputDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:150:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 150 | explicit RotationVel(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:151:64: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 151 | RotationVel(const Rotation& _R,const Vector& _w):R(_R),w(_w){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In member function 'KDL::Rotation KDL::RotationVel::value() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:154:37: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 154 | Rotation value() const { return R;} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' is deprecated [-Wdeprecated-copy] 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:158:26: note: because 'KDL::RotationVel' has user-provided 'KDL::RotationVel& KDL::RotationVel::operator=(const KDL::RotationVel&)' 158 | IMETHOD RotationVel& operator = (const RotationVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In copy constructor 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:139:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 139 | class RotationVel | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: note: synthesized method 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' first required here 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::TwistVel::TwistVel(const KDL::VectorVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:118:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 118 | explicit RotationAcc(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&, const KDL::Vector&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:120:27: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 120 | R(_R),w(_w),dw(_dw) {} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' is deprecated [-Wdeprecated-copy] 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:121:26: note: because 'KDL::RotationAcc' has user-provided 'KDL::RotationAcc& KDL::RotationAcc::operator=(const KDL::RotationAcc&)' 121 | IMETHOD RotationAcc& operator = (const RotationAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In copy constructor 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:110:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 110 | class RotationAcc | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: note: synthesized method 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' first required here 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::TwistAcc::TwistAcc(const KDL::VectorAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ [ 56%] Building CXX object src/Mod/Drawing/App/CMakeFiles/Drawing.dir/FeatureClip.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawing_EXPORTS -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Drawing.dir/FeatureClip.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/FeatureClip.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:267, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:233:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 233 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:241:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 241 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:251:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 251 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:263:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 263 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 56%] Built target ReverseEngineering [ 56%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/Trajectory.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/Trajectory.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp: In member function 'void Gui::Dialog::DlgCustomToolbars::on_moveActionLeftButton_clicked()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp:366:73: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 366 | if (item && item->parent() && toolbarTreeWidget->isItemSelected(item)) { | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgToolbars.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp:34: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp: In member function 'void Gui::Dialog::DlgCustomToolbars::on_moveActionUpButton_clicked()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp:400:73: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 400 | if (item && item->parent() && toolbarTreeWidget->isItemSelected(item)) { | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgToolbars.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp:34: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp: In member function 'void Gui::Dialog::DlgCustomToolbars::on_moveActionDownButton_clicked()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp:438:73: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 438 | if (item && item->parent() && toolbarTreeWidget->isItemSelected(item)) { | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgToolbars.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp:34: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp: In member function 'void Gui::Dialog::DlgCustomToolbars::on_newButton_clicked()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp:491:54: warning: 'void QTreeWidget::setItemExpanded(const QTreeWidgetItem*, bool)' is deprecated: Use QTreeWidgetItem::setExpanded() instead [-Wdeprecated-declarations] 491 | toolbarTreeWidget->setItemExpanded(item, true); | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgToolbars.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp:34: /usr/include/qt5/QtWidgets/qtreewidget.h:337:10: note: declared here 337 | void setItemExpanded(const QTreeWidgetItem *item, bool expand); | ^~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp: In member function 'void Gui::Dialog::DlgCustomToolbars::on_deleteButton_clicked()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp:503:74: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 503 | if (item && !item->parent() && toolbarTreeWidget->isItemSelected(item)) { | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgToolbars.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp:34: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp: In member function 'void Gui::Dialog::DlgCustomToolbars::on_renameButton_clicked()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp:519:74: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 519 | if (item && !item->parent() && toolbarTreeWidget->isItemSelected(item)) { | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgToolbars.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgToolbarsImp.cpp:34: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ [ 56%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/Simulation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/Simulation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Simulation.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Simulation.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Simulation.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Simulation.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 56%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/Waypoint.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/Waypoint.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/regex/v4/regex_workaround.hpp:44, from /usr/include/boost/regex/v4/regex.hpp:32, from /usr/include/boost/regex.hpp:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/FeatureViewSymbol.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:150:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 150 | explicit RotationVel(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:151:64: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 151 | RotationVel(const Rotation& _R,const Vector& _w):R(_R),w(_w){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In member function 'KDL::Rotation KDL::RotationVel::value() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:154:37: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 154 | Rotation value() const { return R;} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' is deprecated [-Wdeprecated-copy] 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:158:26: note: because 'KDL::RotationVel' has user-provided 'KDL::RotationVel& KDL::RotationVel::operator=(const KDL::RotationVel&)' 158 | IMETHOD RotationVel& operator = (const RotationVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In copy constructor 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:139:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 139 | class RotationVel | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: note: synthesized method 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' first required here 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::TwistVel::TwistVel(const KDL::VectorVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:118:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 118 | explicit RotationAcc(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&, const KDL::Vector&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:120:27: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 120 | R(_R),w(_w),dw(_dw) {} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' is deprecated [-Wdeprecated-copy] 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:121:26: note: because 'KDL::RotationAcc' has user-provided 'KDL::RotationAcc& KDL::RotationAcc::operator=(const KDL::RotationAcc&)' 121 | IMETHOD RotationAcc& operator = (const RotationAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In copy constructor 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:110:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 110 | class RotationAcc | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: note: synthesized method 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' first required here 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::TwistAcc::TwistAcc(const KDL::VectorAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:267, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:233:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 233 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:241:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 241 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:251:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 251 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:263:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 263 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ [ 56%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/AppRobot.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/AppRobot.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/AppRobot.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/FeatureClip.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/Feature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureTransformed.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeaturePolarPattern.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeaturePolarPattern.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 56%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/PreCompiled.cpp [ 56%] Building CXX object src/Mod/MeshPart/App/CMakeFiles/MeshPart.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_MEFISTO -DHAVE_SMESH -DHAVE_TBB -DHAVE_VTK -DMeshPart_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshPart.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/App/PreCompiled.cpp [ 56%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/Robot6AxisPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/Robot6AxisPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6AxisPyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6AxisPyImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6AxisPyImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6AxisPyImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 56%] Linking CXX shared library ../../../../Mod/MeshPart/MeshPart.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/MeshPart.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,MeshPart.so -o ../../../../Mod/MeshPart/MeshPart.so CMakeFiles/MeshPart.dir/AppMeshPart.cpp.o CMakeFiles/MeshPart.dir/AppMeshPartPy.cpp.o CMakeFiles/MeshPart.dir/CurveProjector.cpp.o CMakeFiles/MeshPart.dir/MeshAlgos.cpp.o CMakeFiles/MeshPart.dir/Mesher.cpp.o CMakeFiles/MeshPart.dir/PreCompiled.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Mesh:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Part/Part.so ../../../../Mod/Mesh/Mesh.so ../../../../lib/libStdMeshers.so ../../../../lib/libSMESH.so ../../../../lib/libFreeCADApp.so /usr/lib64/libQt5Xml.so.5.15.2 ../../../../lib/libFreeCADBase.so /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so -lutil -ldl /usr/lib64/libQt5Concurrent.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 ../../../../lib/libDriverSTL.so ../../../../lib/libDriverDAT.so ../../../../lib/libDriverUNV.so ../../../../lib/libSMESHDS.so ../../../../lib/libSMDS.so /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread ../../../../lib/libDriver.so /usr/lib64/libmedC.so /usr/lib64/libmed.so /usr/lib64/libvtkFiltersVerdict-8.2.so.1 /usr/lib64/libvtkverdict-8.2.so.1 /usr/lib64/libdouble-conversion.so /usr/lib64/liblz4.so /usr/lib64/liblzma.so /usr/lib64/libexpat.so /usr/lib64/libvtkIOMPIParallel-8.2.so.1 /usr/lib64/libjpeg.so /usr/lib64/libpng.so /usr/lib64/libtiff.so /usr/lib64/libvtkIOParallel-8.2.so.1 /usr/lib64/libvtkIOGeometry-8.2.so.1 /usr/lib64/libvtkIOImage-8.2.so.1 /usr/lib64/libvtkDICOMParser-8.2.so.1 /usr/lib64/libvtkmetaio-8.2.so.1 /usr/lib64/libz.so /usr/lib64/libvtkIONetCDF-8.2.so.1 /usr/lib64/libhdf5.so /usr/lib64/libdl.so /usr/lib64/libm.so /usr/lib64/libhdf5_hl.so /usr/lib64/libvtkexodusII-8.2.so.1 /usr/lib64/libnetcdf.so /usr/lib64/libjsoncpp.so /usr/lib64/libvtkFiltersParallelDIY2-8.2.so.1 /usr/lib64/libvtkIOXML-8.2.so.1 /usr/lib64/libvtkIOXMLParser-8.2.so.1 /usr/lib64/libvtkFiltersParallel-8.2.so.1 /usr/lib64/libvtkFiltersModeling-8.2.so.1 /usr/lib64/libvtkParallelMPI-8.2.so.1 /usr/lib64/libvtkParallelCore-8.2.so.1 /usr/lib64/libvtkIOLegacy-8.2.so.1 /usr/lib64/libvtkIOCore-8.2.so.1 /usr/lib64/libvtkInteractionStyle-8.2.so.1 /usr/lib64/libvtkFiltersExtraction-8.2.so.1 /usr/lib64/libvtkFiltersStatistics-8.2.so.1 /usr/lib64/libvtkImagingFourier-8.2.so.1 /usr/lib64/libvtkImagingCore-8.2.so.1 /usr/lib64/libvtkRenderingFreeType-8.2.so.1 /usr/lib64/libvtkRenderingOpenGL2-8.2.so.1 /usr/lib64/libvtkRenderingCore-8.2.so.1 /usr/lib64/libvtkFiltersSources-8.2.so.1 /usr/lib64/libvtkFiltersGeneral-8.2.so.1 /usr/lib64/libvtkCommonComputationalGeometry-8.2.so.1 /usr/lib64/libvtkFiltersGeometry-8.2.so.1 /usr/lib64/libvtkFiltersCore-8.2.so.1 /usr/lib64/libvtkCommonExecutionModel-8.2.so.1 /usr/lib64/libvtkCommonColor-8.2.so.1 /usr/lib64/libvtkCommonDataModel-8.2.so.1 /usr/lib64/libvtkCommonMisc-8.2.so.1 /usr/lib64/libvtkCommonSystem-8.2.so.1 /usr/lib64/libvtkCommonTransforms-8.2.so.1 /usr/lib64/libvtkCommonMath-8.2.so.1 /usr/lib64/libvtkCommonCore-8.2.so.1 /usr/lib64/libvtksys-8.2.so.1 /usr/lib64/libSM.so /usr/lib64/libICE.so /usr/lib64/libX11.so /usr/lib64/libXext.so /usr/lib64/libXt.so /usr/lib64/libGLEW.so ../../../../lib/libMEFISTO2.so -lmpi_cxx -lmpi /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKXDESTEP.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXDEIGES.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKXCAF.so.7.4.1 /usr/lib64/libTKVCAF.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKMeshVS.so.7.4.1 /usr/lib64/libTKV3d.so.7.4.1 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKService.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so -lfontconfig -lGL -lX11 -lXext -lXmu -lXi /usr/lib64/libfreetype.so In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/Robot6AxisPy.h:8, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/AppRobot.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/Robot6AxisPy.h:8, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/AppRobot.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/Robot6AxisPy.h:8, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/AppRobot.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 57%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgWorkbenchesImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgWorkbenchesImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgWorkbenchesImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6AxisPyImp.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/Robot6AxisPy.cpp: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/Robot6AxisPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/Robot6AxisPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 57%] Built target MeshPart /usr/bin/gmake -f src/Mod/Draft/App/CMakeFiles/DraftUtils.dir/build.make src/Mod/Draft/App/CMakeFiles/DraftUtils.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/App/CMakeFiles/DraftUtils.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/App/CMakeFiles/DraftUtils.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/App/CMakeFiles/DraftUtils.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/App/CMakeFiles/DraftUtils.dir/depend.internal". Scanning dependencies of target DraftUtils gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Draft/App/CMakeFiles/DraftUtils.dir/build.make src/Mod/Draft/App/CMakeFiles/DraftUtils.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 57%] Building CXX object src/Mod/Draft/App/CMakeFiles/DraftUtils.dir/AppDraftUtils.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDraftUtils_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/DraftUtils.dir/AppDraftUtils.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/App/AppDraftUtils.cpp [ 57%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/TrajectoryPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/TrajectoryPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryPyImp.cpp [ 57%] Building CXX object src/Mod/Drawing/App/CMakeFiles/Drawing.dir/PageGroup.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawing_EXPORTS -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Drawing.dir/PageGroup.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/PageGroup.cpp [ 57%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeatureScaled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeatureScaled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureScaled.cpp [ 57%] Building CXX object src/Mod/Draft/App/CMakeFiles/DraftUtils.dir/AppDraftUtilsPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDraftUtils_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/DraftUtils.dir/AppDraftUtilsPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/App/AppDraftUtilsPy.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryPyImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryPyImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryPyImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/AppRobot.cpp:43: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 57%] Building CXX object src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/AppSketcher.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSketcher_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/.. -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Sketcher.dir/AppSketcher.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/AppSketcher.cpp [ 57%] Building CXX object src/Mod/Drawing/App/CMakeFiles/Drawing.dir/FeatureViewSpreadsheet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawing_EXPORTS -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Drawing.dir/FeatureViewSpreadsheet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/FeatureViewSpreadsheet.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryPyImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/TrajectoryPy.cpp: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/TrajectoryPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/TrajectoryPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 57%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/RobotObjectPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/RobotObjectPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObjectPyImp.cpp [ 57%] Building CXX object src/Mod/Drawing/App/CMakeFiles/Drawing.dir/DrawingExport.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawing_EXPORTS -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Drawing.dir/DrawingExport.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/DrawingExport.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/Feature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureTransformed.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureScaled.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureScaled.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/App/AppDraftUtilsPy.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectGroup.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/PageGroup.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/PageGroup.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Part2DObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/SketchObjectSF.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/AppSketcher.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgWorkbenchesImp.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qalgorithms.h:43, from /usr/include/qt5/QtCore/qdebug.h:44, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgWorkbenchesImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgWorkbenchesImp.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qalgorithms.h:43, from /usr/include/qt5/QtCore/qdebug.h:44, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgWorkbenchesImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgWorkbenchesImp.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/FeatureViewSpreadsheet.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/FeatureViewSpreadsheet.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgWorkbenchesImp.cpp: In static member function 'static QStringList Gui::Dialog::DlgWorkbenchesImp::load_enabled_workbenches()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgWorkbenchesImp.cpp:212:85: warning: 'QStringList QString::split(const QString&, QString::SplitBehavior, Qt::CaseSensitivity) const' is deprecated: Use Qt::SplitBehavior variant instead [-Wdeprecated-declarations] 212 | enabled_wbs_list = enabled_wbs.split(QLatin1String(","), QString::SkipEmptyParts); | ^ In file included from /usr/include/qt5/QtCore/qhashfunctions.h:44, from /usr/include/qt5/QtCore/qlist.h:47, from /usr/include/qt5/QtCore/qhash.h:46, from /usr/include/qt5/QtCore/qdebug.h:45, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgWorkbenchesImp.cpp:28: /usr/include/qt5/QtCore/qstring.h:609:17: note: declared here 609 | QStringList split(const QString &sep, SplitBehavior behavior, | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgWorkbenchesImp.cpp: In static member function 'static QStringList Gui::Dialog::DlgWorkbenchesImp::load_disabled_workbenches()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgWorkbenchesImp.cpp:233:87: warning: 'QStringList QString::split(const QString&, QString::SplitBehavior, Qt::CaseSensitivity) const' is deprecated: Use Qt::SplitBehavior variant instead [-Wdeprecated-declarations] 233 | disabled_wbs_list = disabled_wbs.split(QLatin1String(","), QString::SkipEmptyParts); | ^ In file included from /usr/include/qt5/QtCore/qhashfunctions.h:44, from /usr/include/qt5/QtCore/qlist.h:47, from /usr/include/qt5/QtCore/qhash.h:46, from /usr/include/qt5/QtCore/qdebug.h:45, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgWorkbenchesImp.cpp:28: /usr/include/qt5/QtCore/qstring.h:609:17: note: declared here 609 | QStringList split(const QString &sep, SplitBehavior behavior, | ^~~~~ [ 57%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeatureMultiTransform.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeatureMultiTransform.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureMultiTransform.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObjectPyImp.cpp:26: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 57%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/WaypointPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/WaypointPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/WaypointPyImp.cpp [ 57%] Building CXX object src/Mod/Draft/App/CMakeFiles/DraftUtils.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDraftUtils_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/DraftUtils.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/App/PreCompiled.cpp [ 57%] Building CXX object src/Mod/Draft/App/CMakeFiles/DraftUtils.dir/dxf.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDraftUtils_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/DraftUtils.dir/dxf.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/App/dxf.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObjectPyImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObjectPyImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObjectPyImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 57%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/QListWidgetCustom.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/QListWidgetCustom.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QListWidgetCustom.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/WaypointPyImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/WaypointPyImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Waypoint.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/WaypointPyImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 57%] Building CXX object src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/AppSketcherPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSketcher_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/.. -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Sketcher.dir/AppSketcherPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/AppSketcherPy.cpp [ 57%] Building CXX object src/Mod/Drawing/App/CMakeFiles/Drawing.dir/ProjectionAlgos.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawing_EXPORTS -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Drawing.dir/ProjectionAlgos.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/ProjectionAlgos.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObjectPyImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/RobotObjectPy.cpp: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/RobotObjectPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/RobotObjectPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/WaypointPyImp.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/WaypointPy.cpp: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/WaypointPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App/WaypointPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 57%] Building CXX object src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSketcher_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/.. -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Sketcher.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/PreCompiled.cpp [ 57%] Building CXX object src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/SketchObjectSFPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSketcher_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/.. -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Sketcher.dir/SketchObjectSFPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/SketchObjectSFPyImp.cpp [ 57%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgEditorImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgEditorImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/Feature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureTransformed.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureMultiTransform.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureMultiTransform.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 57%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/articulatedbodyinertia.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/articulatedbodyinertia.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/articulatedbodyinertia.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/articulatedbodyinertia.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/articulatedbodyinertia.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/articulatedbodyinertia.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/articulatedbodyinertia.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/articulatedbodyinertia.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/articulatedbodyinertia.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 57%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/chain.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/chain.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 57%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgGeneralImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgGeneralImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgGeneralImp.cpp [ 57%] Building CXX object src/Mod/Draft/App/CMakeFiles/DraftUtils.dir/DraftDxf.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDraftUtils_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/DraftUtils.dir/DraftDxf.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/App/DraftDxf.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/AppSketcherPy.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcombobox.h:43, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcombobox.h:43, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 57%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeatureSketchBased.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeatureSketchBased.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureSketchBased.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcombobox.h:43, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcombobox.h:43, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcombobox.h:43, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h: In member function 'void Gui::Dialog::Ui_DlgEditorSettings::setupUi(QWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h:214:38: warning: 'void QTextEdit::setTabStopWidth(int)' is deprecated [-Wdeprecated-declarations] 214 | textEdit1->setTabStopWidth(40); | ^ In file included from /usr/include/qt5/QtWidgets/QTextEdit:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.cpp:31: /usr/include/qt5/QtWidgets/qtextedit.h:203:24: note: declared here 203 | QT_DEPRECATED void setTabStopWidth(int width); | ^~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Part2DObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/SketchObjectSF.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/SketchObjectSFPyImp.cpp:25: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/App/ProjectionAlgos.cpp:76: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgGeneral.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgGeneralImp.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgGeneralImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgGeneral.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgGeneralImp.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgGeneralImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 57%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgOnlineHelpImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgOnlineHelpImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/SketchObjectSFPyImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/SketchObjectSFPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/SketchObjectSFPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgGeneral.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgGeneralImp.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgGeneralImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgGeneral.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgGeneralImp.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgGeneralImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgGeneral.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgGeneralImp.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgGeneralImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 57%] Building CXX object src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/SketchObjectPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSketcher_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/.. -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Sketcher.dir/SketchObjectPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/SketchObjectPyImp.cpp [ 57%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/chaindynparam.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/chaindynparam.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chaindynparam.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver_recursive_newton_euler.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chaindynparam.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chaindynparam.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver_recursive_newton_euler.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chaindynparam.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chaindynparam.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver_recursive_newton_euler.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chaindynparam.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chaindynparam.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/App/DraftDxf.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Draft/App/DraftDxf.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 57%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/chainfksolverpos_recursive.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/chainfksolverpos_recursive.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:150:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 150 | explicit RotationVel(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:151:64: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 151 | RotationVel(const Rotation& _R,const Vector& _w):R(_R),w(_w){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In member function 'KDL::Rotation KDL::RotationVel::value() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:154:37: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 154 | Rotation value() const { return R;} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' is deprecated [-Wdeprecated-copy] 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:158:26: note: because 'KDL::RotationVel' has user-provided 'KDL::RotationVel& KDL::RotationVel::operator=(const KDL::RotationVel&)' 158 | IMETHOD RotationVel& operator = (const RotationVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In copy constructor 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:139:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 139 | class RotationVel | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: note: synthesized method 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' first required here 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::TwistVel::TwistVel(const KDL::VectorVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:118:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 118 | explicit RotationAcc(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&, const KDL::Vector&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:120:27: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 120 | R(_R),w(_w),dw(_dw) {} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' is deprecated [-Wdeprecated-copy] 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:121:26: note: because 'KDL::RotationAcc' has user-provided 'KDL::RotationAcc& KDL::RotationAcc::operator=(const KDL::RotationAcc&)' 121 | IMETHOD RotationAcc& operator = (const RotationAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In copy constructor 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:110:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 110 | class RotationAcc | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: note: synthesized method 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' first required here 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::TwistAcc::TwistAcc(const KDL::VectorAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:267, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:233:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 233 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:241:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 241 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:251:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 251 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:263:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 263 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ [ 57%] Linking CXX shared library ../../../../Mod/Drawing/Drawing.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/Drawing.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,Drawing.so -o ../../../../Mod/Drawing/Drawing.so CMakeFiles/Drawing.dir/AppDrawing.cpp.o CMakeFiles/Drawing.dir/AppDrawingPy.cpp.o CMakeFiles/Drawing.dir/PreCompiled.cpp.o CMakeFiles/Drawing.dir/FeaturePage.cpp.o CMakeFiles/Drawing.dir/FeatureProjection.cpp.o CMakeFiles/Drawing.dir/FeatureView.cpp.o CMakeFiles/Drawing.dir/FeatureViewPart.cpp.o CMakeFiles/Drawing.dir/FeatureViewAnnotation.cpp.o CMakeFiles/Drawing.dir/FeatureViewSymbol.cpp.o CMakeFiles/Drawing.dir/FeatureClip.cpp.o CMakeFiles/Drawing.dir/PageGroup.cpp.o CMakeFiles/Drawing.dir/FeatureViewSpreadsheet.cpp.o CMakeFiles/Drawing.dir/DrawingExport.cpp.o CMakeFiles/Drawing.dir/ProjectionAlgos.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Spreadsheet:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Part/Part.so ../../../../Mod/Spreadsheet/Spreadsheet.so ../../../../lib/libFreeCADApp.so /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so /usr/lib64/libfreetype.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread -lpthread /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureSketchBased.cpp:76: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgOnlineHelp.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgOnlineHelp.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 57%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/chainfksolvervel_recursive.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/chainfksolvervel_recursive.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/chainidsolver_recursive_newton_euler.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/chainidsolver_recursive_newton_euler.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver_recursive_newton_euler.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:150:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 150 | explicit RotationVel(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:151:64: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 151 | RotationVel(const Rotation& _R,const Vector& _w):R(_R),w(_w){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In member function 'KDL::Rotation KDL::RotationVel::value() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:154:37: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 154 | Rotation value() const { return R;} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' is deprecated [-Wdeprecated-copy] 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:158:26: note: because 'KDL::RotationVel' has user-provided 'KDL::RotationVel& KDL::RotationVel::operator=(const KDL::RotationVel&)' 158 | IMETHOD RotationVel& operator = (const RotationVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In copy constructor 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:139:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 139 | class RotationVel | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: note: synthesized method 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' first required here 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::TwistVel::TwistVel(const KDL::VectorVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver_recursive_newton_euler.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver_recursive_newton_euler.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver_recursive_newton_euler.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver_recursive_newton_euler.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver_recursive_newton_euler.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver_recursive_newton_euler.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:118:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 118 | explicit RotationAcc(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&, const KDL::Vector&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:120:27: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 120 | R(_R),w(_w),dw(_dw) {} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' is deprecated [-Wdeprecated-copy] 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:121:26: note: because 'KDL::RotationAcc' has user-provided 'KDL::RotationAcc& KDL::RotationAcc::operator=(const KDL::RotationAcc&)' 121 | IMETHOD RotationAcc& operator = (const RotationAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In copy constructor 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:110:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 110 | class RotationAcc | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: note: synthesized method 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' first required here 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::TwistAcc::TwistAcc(const KDL::VectorAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:267, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainfksolvervel_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:233:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 233 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:241:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 241 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:251:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 251 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:263:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 263 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 58%] Built target Drawing [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/chainidsolver_vereshchagin.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/chainidsolver_vereshchagin.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver_vereshchagin.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgOnlineHelp.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgOnlineHelp.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgOnlineHelp.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver_vereshchagin.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver_vereshchagin.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver_vereshchagin.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver_vereshchagin.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver_vereshchagin.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainidsolver_vereshchagin.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 58%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgPreferencesImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgPreferencesImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/SketchObjectPyImp.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 58%] Linking CXX shared library ../../../../Mod/Draft/DraftUtils.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Draft/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/DraftUtils.dir/link.txt --verbose=1 [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/chainiksolverpos_lma.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/chainiksolverpos_lma.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.cpp [ 58%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgReportViewImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgReportViewImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgReportViewImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,DraftUtils.so -o ../../../../Mod/Draft/DraftUtils.so CMakeFiles/DraftUtils.dir/AppDraftUtils.cpp.o CMakeFiles/DraftUtils.dir/AppDraftUtilsPy.cpp.o CMakeFiles/DraftUtils.dir/PreCompiled.cpp.o CMakeFiles/DraftUtils.dir/dxf.cpp.o CMakeFiles/DraftUtils.dir/DraftDxf.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Part/Part.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so /usr/lib64/libfreetype.so In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:150:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 150 | explicit RotationVel(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:151:64: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 151 | RotationVel(const Rotation& _R,const Vector& _w):R(_R),w(_w){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In member function 'KDL::Rotation KDL::RotationVel::value() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:154:37: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 154 | Rotation value() const { return R;} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' is deprecated [-Wdeprecated-copy] 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:158:26: note: because 'KDL::RotationVel' has user-provided 'KDL::RotationVel& KDL::RotationVel::operator=(const KDL::RotationVel&)' 158 | IMETHOD RotationVel& operator = (const RotationVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In copy constructor 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:139:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 139 | class RotationVel | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: note: synthesized method 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' first required here 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::TwistVel::TwistVel(const KDL::VectorVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:118:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 118 | explicit RotationAcc(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&, const KDL::Vector&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:120:27: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 120 | R(_R),w(_w),dw(_dw) {} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' is deprecated [-Wdeprecated-copy] 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:121:26: note: because 'KDL::RotationAcc' has user-provided 'KDL::RotationAcc& KDL::RotationAcc::operator=(const KDL::RotationAcc&)' 121 | IMETHOD RotationAcc& operator = (const RotationAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In copy constructor 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:110:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 110 | class RotationAcc | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: note: synthesized method 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' first required here 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::TwistAcc::TwistAcc(const KDL::VectorAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:267, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_lma.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:233:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 233 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:241:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 241 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:251:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 251 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:263:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 263 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ [ 58%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgSettings3DViewImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgSettings3DViewImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 58%] Built target DraftUtils [ 58%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgSettingsUnitsImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgSettingsUnitsImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsUnitsImp.cpp In file included from /usr/include/opencascade/gp_XYZ.hxx:351, from /usr/include/opencascade/gp_Pnt.hxx:22, from /usr/include/opencascade/Bnd_Box.hxx:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureSketchBased.cpp:27: /usr/include/opencascade/gp_XYZ.lxx: In static member function 'static bool PartDesign::ProfileBased::checkLineCrossesFace(const gp_Lin&, const TopoDS_Face&)': /usr/include/opencascade/gp_XYZ.lxx:94:37: warning: '*((void*)(&)+24).gp_XYZ::z' may be used uninitialized in this function [-Wmaybe-uninitialized] 94 | Standard_Real Xresult = y * Right.z - z * Right.y; | ~~~~~~^ /usr/include/opencascade/gp_XYZ.lxx:94:51: warning: '*((void*)(&)+24).gp_XYZ::y' may be used uninitialized in this function [-Wmaybe-uninitialized] 94 | Standard_Real Xresult = y * Right.z - z * Right.y; | ~~~~~~^ /usr/include/opencascade/gp_XYZ.lxx:95:37: warning: '*((void*)(&)+24).gp_XYZ::x' may be used uninitialized in this function [-Wmaybe-uninitialized] 95 | Standard_Real Yresult = z * Right.x - x * Right.z; | ~~~~~~^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.h:115:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 115 | DlgPreferencesImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgReportView.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgReportViewImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgReportViewImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgReportViewImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgReportView.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgReportViewImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgReportViewImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgReportViewImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.h:54:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 54 | DlgCustomizeImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.cpp: In member function 'virtual void Gui::Dialog::DlgPreferencesImp::resizeEvent(QResizeEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.cpp:310:65: warning: 'const QRect QDesktopWidget::availableGeometry(int) const' is deprecated: Use QGuiApplication::screens() [-Wdeprecated-declarations] 310 | QRect rect = QApplication::desktop()->availableGeometry(); | ^ In file included from /usr/include/qt5/QtWidgets/QDesktopWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.cpp:30: /usr/include/qt5/QtWidgets/qdesktopwidget.h:88:67: note: declared here 88 | QT_DEPRECATED_X("Use QGuiApplication::screens()") const QRect availableGeometry(int screen = -1) const; | ^~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/SketchObjectPyImp.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/SketchObjectPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/SketchObjectPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 58%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeaturePad.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeaturePad.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeaturePad.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgReportView.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgReportViewImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgReportViewImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgReportViewImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgReportView.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgReportViewImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgReportViewImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgReportViewImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgReportView.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgReportViewImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgReportViewImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgReportViewImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 58%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeaturePocket.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeaturePocket.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeaturePocket.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsUnitsImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsUnitsImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsUnitsImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsUnitsImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettings3DView.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettings3DView.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 58%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgSettingsViewColor.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgSettingsViewColor.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettings3DView.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettings3DView.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettings3DView.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsUnitsImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsUnitsImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsUnitsImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsUnitsImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsUnitsImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsUnitsImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 58%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgSettingsColorGradientImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgSettingsColorGradientImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsColorGradientImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettings3DView.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 58%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgSettingsDocumentImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgSettingsDocumentImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocumentImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsViewColor.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsViewColor.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsViewColor.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsViewColor.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettings3DViewImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeaturePad.cpp:53: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsViewColor.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsViewColor.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsViewColor.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsViewColor.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsViewColor.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsViewColor.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsViewColor.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeaturePocket.cpp:50: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsColorGradientImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsColorGradientImp.h:44:76: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 44 | DlgSettingsColorGradientImp( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/qlocale.h:43, from /usr/include/qt5/QtCore/QLocale:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsColorGradientImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsDocument.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocumentImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocumentImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsDocument.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocumentImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocumentImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsDocument.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocumentImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocumentImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsDocument.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocumentImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocumentImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/chainiksolverpos_nr.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/chainiksolverpos_nr.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:150:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 150 | explicit RotationVel(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:151:64: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 151 | RotationVel(const Rotation& _R,const Vector& _w):R(_R),w(_w){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In member function 'KDL::Rotation KDL::RotationVel::value() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:154:37: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 154 | Rotation value() const { return R;} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' is deprecated [-Wdeprecated-copy] 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:158:26: note: because 'KDL::RotationVel' has user-provided 'KDL::RotationVel& KDL::RotationVel::operator=(const KDL::RotationVel&)' 158 | IMETHOD RotationVel& operator = (const RotationVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In copy constructor 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:139:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 139 | class RotationVel | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: note: synthesized method 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' first required here 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::TwistVel::TwistVel(const KDL::VectorVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:118:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 118 | explicit RotationAcc(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&, const KDL::Vector&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:120:27: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 120 | R(_R),w(_w),dw(_dw) {} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' is deprecated [-Wdeprecated-copy] 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:121:26: note: because 'KDL::RotationAcc' has user-provided 'KDL::RotationAcc& KDL::RotationAcc::operator=(const KDL::RotationAcc&)' 121 | IMETHOD RotationAcc& operator = (const RotationAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In copy constructor 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:110:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 110 | class RotationAcc | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: note: synthesized method 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' first required here 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::TwistAcc::TwistAcc(const KDL::VectorAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:267, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:233:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 233 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:241:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 241 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:251:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 251 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:263:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 263 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsDocument.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocumentImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocumentImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsDocument.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocumentImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocumentImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsDocument.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocumentImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocumentImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsDocument.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocumentImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocumentImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsDocument.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocumentImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocumentImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsDocument.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocumentImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsDocumentImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 58%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgSettingsImageImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgSettingsImageImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsImageImp.cpp [ 58%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DlgSettingsMacroImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DlgSettingsMacroImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacroImp.cpp [ 58%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/CombiView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/CombiView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.cpp [ 58%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeatureRevolution.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeatureRevolution.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureRevolution.cpp [ 58%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeatureGroove.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeatureGroove.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureGroove.cpp [ 58%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DockWindow.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DockWindow.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DockWindow.cpp [ 58%] Building CXX object src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/ConstraintPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSketcher_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/.. -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Sketcher.dir/ConstraintPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/ConstraintPyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsMacro.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacroImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacroImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsMacro.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacroImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacroImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsMacro.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacroImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacroImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsMacro.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacroImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacroImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsMacro.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacroImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacroImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsMacro.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacroImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacroImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsMacro.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacroImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacroImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsMacro.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacroImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacroImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsMacro.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacroImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacroImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsMacro.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacroImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsMacroImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 58%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/PropertyView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/PropertyView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyView.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsImageImp.cpp: In member function 'QString Gui::Dialog::DlgSettingsImageImp::comment() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsImageImp.cpp:132:25: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 132 | return QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qhashfunctions.h:44, from /usr/include/qt5/QtCore/qlist.h:47, from /usr/include/qt5/QtCore/qvariant.h:45, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsImage.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsImageImp.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsImageImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsImageImp.cpp:132:25: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 132 | return QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qhashfunctions.h:44, from /usr/include/qt5/QtCore/qlist.h:47, from /usr/include/qt5/QtCore/qvariant.h:45, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgSettingsImage.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsImageImp.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsImageImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/ConstraintPyImp.cpp:27: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/ConstraintPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/ConstraintPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 58%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ReportView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ReportView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureRevolution.cpp:43: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 58%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SelectionView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SelectionView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SelectionView.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureGroove.cpp:44: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 58%] Building CXX object src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/SketchPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSketcher_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/.. -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Sketcher.dir/SketchPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/SketchPyImp.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyView.cpp:31: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qsplitter.h:43, from /usr/include/qt5/QtWidgets/QSplitter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qgridlayout.h:43, from /usr/include/qt5/QtWidgets/QGridLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qgridlayout.h:43, from /usr/include/qt5/QtWidgets/QGridLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qgridlayout.h:43, from /usr/include/qt5/QtWidgets/QGridLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.cpp:38: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp: In constructor 'Gui::DockWnd::ReportView::ReportView(QWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp:69:46: warning: 'static QString Gui::DockWnd::ReportView::trUtf8(const char*, const char*, int)' is deprecated [-Wdeprecated-declarations] 69 | tabOutput->setWindowTitle(trUtf8("Output")); | ^ In file included from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtWidgets/qlayout.h:44, from /usr/include/qt5/QtWidgets/qgridlayout.h:44, from /usr/include/qt5/QtWidgets/QGridLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.h:49:5: note: declared here 49 | Q_OBJECT | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp:77:54: warning: 'static QString Gui::DockWnd::ReportView::trUtf8(const char*, const char*, int)' is deprecated [-Wdeprecated-declarations] 77 | tabPython->setWindowTitle(trUtf8("Python console")); | ^ In file included from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtWidgets/qlayout.h:44, from /usr/include/qt5/QtWidgets/qgridlayout.h:44, from /usr/include/qt5/QtWidgets/QGridLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.h:49:5: note: declared here 49 | Q_OBJECT | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp: In member function 'virtual void Gui::DockWnd::ReportView::changeEvent(QEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp:101:50: warning: 'static QString Gui::DockWnd::ReportView::trUtf8(const char*, const char*, int)' is deprecated [-Wdeprecated-declarations] 101 | tabOutput->setWindowTitle(trUtf8("Output")); | ^ In file included from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtWidgets/qlayout.h:44, from /usr/include/qt5/QtWidgets/qgridlayout.h:44, from /usr/include/qt5/QtWidgets/QGridLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.h:49:5: note: declared here 49 | Q_OBJECT | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp:102:58: warning: 'static QString Gui::DockWnd::ReportView::trUtf8(const char*, const char*, int)' is deprecated [-Wdeprecated-declarations] 102 | tabPython->setWindowTitle(trUtf8("Python console")); | ^ In file included from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtWidgets/qlayout.h:44, from /usr/include/qt5/QtWidgets/qgridlayout.h:44, from /usr/include/qt5/QtWidgets/QGridLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.h:49:5: note: declared here 49 | Q_OBJECT | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp: In member function 'virtual void Gui::DockWnd::ReportOutput::OnChange(Base::Subject&, const char*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp:561:55: warning: 'int QFontMetrics::width(const QString&, int) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 561 | int width = metric.width(QLatin1String("0000")); | ^ In file included from /usr/include/qt5/QtWidgets/qwidget.h:50, from /usr/include/qt5/QtWidgets/qmenu.h:44, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp:28: /usr/include/qt5/QtGui/qfontmetrics.h:106:9: note: declared here 106 | int width(const QString &, int len = -1) const; | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp:562:30: warning: 'void QTextEdit::setTabStopWidth(int)' is deprecated [-Wdeprecated-declarations] 562 | setTabStopWidth(width); | ^ In file included from /usr/include/qt5/QtWidgets/QTextEdit:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ReportView.cpp:35: /usr/include/qt5/QtWidgets/qtextedit.h:203:24: note: declared here 203 | QT_DEPRECATED void setTabStopWidth(int width); | ^~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyEditor.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qsplitter.h:43, from /usr/include/qt5/QtWidgets/QSplitter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyEditor.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qsplitter.h:43, from /usr/include/qt5/QtWidgets/QSplitter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.cpp: In constructor 'Gui::DockWnd::CombiView::CombiView(Gui::Document*, QWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.cpp:73:41: warning: 'static QString Gui::DockWnd::CombiView::trUtf8(const char*, const char*, int)' is deprecated [-Wdeprecated-declarations] 73 | tabs->addTab(splitter,trUtf8("Model")); | ^ In file included from /usr/include/qt5/QtGui/qwindowdefs.h:44, from /usr/include/qt5/QtWidgets/qwidget.h:44, from /usr/include/qt5/QtWidgets/qframe.h:44, from /usr/include/qt5/QtWidgets/qsplitter.h:44, from /usr/include/qt5/QtWidgets/QSplitter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.h:66:5: note: declared here 66 | Q_OBJECT | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.cpp:77:43: warning: 'static QString Gui::DockWnd::CombiView::trUtf8(const char*, const char*, int)' is deprecated [-Wdeprecated-declarations] 77 | tabs->addTab(taskPanel, trUtf8("Tasks")); | ^ In file included from /usr/include/qt5/QtGui/qwindowdefs.h:44, from /usr/include/qt5/QtWidgets/qwidget.h:44, from /usr/include/qt5/QtWidgets/qframe.h:44, from /usr/include/qt5/QtWidgets/qsplitter.h:44, from /usr/include/qt5/QtWidgets/QSplitter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.h:66:5: note: declared here 66 | Q_OBJECT | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.cpp: In member function 'virtual void Gui::DockWnd::CombiView::changeEvent(QEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.cpp:130:43: warning: 'static QString Gui::DockWnd::CombiView::trUtf8(const char*, const char*, int)' is deprecated [-Wdeprecated-declarations] 130 | tabs->setTabText(0, trUtf8("Model")); | ^ In file included from /usr/include/qt5/QtGui/qwindowdefs.h:44, from /usr/include/qt5/QtWidgets/qwidget.h:44, from /usr/include/qt5/QtWidgets/qframe.h:44, from /usr/include/qt5/QtWidgets/qsplitter.h:44, from /usr/include/qt5/QtWidgets/QSplitter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.h:66:5: note: declared here 66 | Q_OBJECT | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.cpp:131:43: warning: 'static QString Gui::DockWnd::CombiView::trUtf8(const char*, const char*, int)' is deprecated [-Wdeprecated-declarations] 131 | tabs->setTabText(1, trUtf8("Tasks")); | ^ In file included from /usr/include/qt5/QtGui/qwindowdefs.h:44, from /usr/include/qt5/QtWidgets/qwidget.h:44, from /usr/include/qt5/QtWidgets/qframe.h:44, from /usr/include/qt5/QtWidgets/qsplitter.h:44, from /usr/include/qt5/QtWidgets/QSplitter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CombiView.h:66:5: note: declared here 66 | Q_OBJECT | ^~~~~~~~ [ 58%] Building CXX object src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/PropertyConstraintList.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSketcher_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/.. -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Sketcher.dir/PropertyConstraintList.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/PropertyConstraintList.cpp [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/chainiksolverpos_nr_jl.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/chainiksolverpos_nr_jl.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:150:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 150 | explicit RotationVel(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:151:64: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 151 | RotationVel(const Rotation& _R,const Vector& _w):R(_R),w(_w){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In member function 'KDL::Rotation KDL::RotationVel::value() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:154:37: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 154 | Rotation value() const { return R;} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' is deprecated [-Wdeprecated-copy] 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:158:26: note: because 'KDL::RotationVel' has user-provided 'KDL::RotationVel& KDL::RotationVel::operator=(const KDL::RotationVel&)' 158 | IMETHOD RotationVel& operator = (const RotationVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In copy constructor 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:139:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 139 | class RotationVel | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: note: synthesized method 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' first required here 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::TwistVel::TwistVel(const KDL::VectorVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:118:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 118 | explicit RotationAcc(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&, const KDL::Vector&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:120:27: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 120 | R(_R),w(_w),dw(_dw) {} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' is deprecated [-Wdeprecated-copy] 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:121:26: note: because 'KDL::RotationAcc' has user-provided 'KDL::RotationAcc& KDL::RotationAcc::operator=(const KDL::RotationAcc&)' 121 | IMETHOD RotationAcc& operator = (const RotationAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In copy constructor 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:110:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 110 | class RotationAcc | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: note: synthesized method 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' first required here 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::TwistAcc::TwistAcc(const KDL::VectorAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:267, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:233:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 233 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:241:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 241 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:251:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 251 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:263:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 263 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 58%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ToolBox.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ToolBox.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ToolBox.cpp [ 58%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeatureAddSub.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeatureAddSub.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureAddSub.cpp [ 58%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Tree.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Tree.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/chainiksolvervel_pinv.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/chainiksolvervel_pinv.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyView.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qgridlayout.h:43, from /usr/include/qt5/QtWidgets/QGridLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:150:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 150 | explicit RotationVel(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:151:64: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 151 | RotationVel(const Rotation& _R,const Vector& _w):R(_R),w(_w){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In member function 'KDL::Rotation KDL::RotationVel::value() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:154:37: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 154 | Rotation value() const { return R;} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' is deprecated [-Wdeprecated-copy] 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:158:26: note: because 'KDL::RotationVel' has user-provided 'KDL::RotationVel& KDL::RotationVel::operator=(const KDL::RotationVel&)' 158 | IMETHOD RotationVel& operator = (const RotationVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In copy constructor 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:139:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 139 | class RotationVel | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: note: synthesized method 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' first required here 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::TwistVel::TwistVel(const KDL::VectorVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:118:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 118 | explicit RotationAcc(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&, const KDL::Vector&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:120:27: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 120 | R(_R),w(_w),dw(_dw) {} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' is deprecated [-Wdeprecated-copy] 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:121:26: note: because 'KDL::RotationAcc' has user-provided 'KDL::RotationAcc& KDL::RotationAcc::operator=(const KDL::RotationAcc&)' 121 | IMETHOD RotationAcc& operator = (const RotationAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In copy constructor 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:110:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 110 | class RotationAcc | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: note: synthesized method 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' first required here 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::TwistAcc::TwistAcc(const KDL::VectorAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:267, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:233:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 233 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:241:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 241 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:251:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 251 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:263:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 263 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyEditor.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyView.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qgridlayout.h:43, from /usr/include/qt5/QtWidgets/QGridLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyEditor.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyView.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qgridlayout.h:43, from /usr/include/qt5/QtWidgets/QGridLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/SketchPyImp.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/SketchPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/SketchPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyView.cpp: In member function 'virtual void Gui::PropertyView::changeEvent(QEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyView.cpp:328:42: warning: 'static QString Gui::PropertyView::trUtf8(const char*, const char*, int)' is deprecated [-Wdeprecated-declarations] 328 | tabs->setTabText(0, trUtf8("View")); | ^ In file included from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtWidgets/qlayout.h:44, from /usr/include/qt5/QtWidgets/qgridlayout.h:44, from /usr/include/qt5/QtWidgets/QGridLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyView.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyView.h:59:5: note: declared here 59 | Q_OBJECT | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyView.cpp:329:42: warning: 'static QString Gui::PropertyView::trUtf8(const char*, const char*, int)' is deprecated [-Wdeprecated-declarations] 329 | tabs->setTabText(1, trUtf8("Data")); | ^ In file included from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtWidgets/qlayout.h:44, from /usr/include/qt5/QtWidgets/qgridlayout.h:44, from /usr/include/qt5/QtWidgets/QGridLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyView.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyView.h:59:5: note: declared here 59 | Q_OBJECT | ^~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SelectionView.cpp:37: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/chainiksolvervel_pinv_givens.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/chainiksolvervel_pinv_givens.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.hpp:6, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.hpp:6, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.hpp:6, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:27: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.hpp:6, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:150:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 150 | explicit RotationVel(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.hpp:6, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.hpp:6, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:151:64: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 151 | RotationVel(const Rotation& _R,const Vector& _w):R(_R),w(_w){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.hpp:6, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.hpp:6, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In member function 'KDL::Rotation KDL::RotationVel::value() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:154:37: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 154 | Rotation value() const { return R;} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.hpp:6, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.hpp:6, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' is deprecated [-Wdeprecated-copy] 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:158:26: note: because 'KDL::RotationVel' has user-provided 'KDL::RotationVel& KDL::RotationVel::operator=(const KDL::RotationVel&)' 158 | IMETHOD RotationVel& operator = (const RotationVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In copy constructor 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:139:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 139 | class RotationVel | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.hpp:6, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.hpp:6, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: note: synthesized method 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' first required here 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::TwistVel::TwistVel(const KDL::VectorVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.hpp:6, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:118:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 118 | explicit RotationAcc(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.hpp:6, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.hpp:6, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&, const KDL::Vector&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:120:27: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 120 | R(_R),w(_w),dw(_dw) {} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.hpp:6, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.hpp:6, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' is deprecated [-Wdeprecated-copy] 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:121:26: note: because 'KDL::RotationAcc' has user-provided 'KDL::RotationAcc& KDL::RotationAcc::operator=(const KDL::RotationAcc&)' 121 | IMETHOD RotationAcc& operator = (const RotationAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In copy constructor 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:110:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 110 | class RotationAcc | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.hpp:6, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.hpp:6, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: note: synthesized method 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' first required here 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::TwistAcc::TwistAcc(const KDL::VectorAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:267, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.hpp:6, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_givens.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:233:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 233 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:241:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 241 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:251:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 251 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:263:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 263 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/chainiksolvervel_pinv_nso.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/chainiksolvervel_pinv_nso.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SelectionView.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qboxlayout.h:43, from /usr/include/qt5/QtWidgets/QVBoxLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SelectionView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:150:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 150 | explicit RotationVel(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:151:64: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 151 | RotationVel(const Rotation& _R,const Vector& _w):R(_R),w(_w){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In member function 'KDL::Rotation KDL::RotationVel::value() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:154:37: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 154 | Rotation value() const { return R;} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' is deprecated [-Wdeprecated-copy] 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:158:26: note: because 'KDL::RotationVel' has user-provided 'KDL::RotationVel& KDL::RotationVel::operator=(const KDL::RotationVel&)' 158 | IMETHOD RotationVel& operator = (const RotationVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In copy constructor 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:139:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 139 | class RotationVel | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: note: synthesized method 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' first required here 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::TwistVel::TwistVel(const KDL::VectorVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:118:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 118 | explicit RotationAcc(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&, const KDL::Vector&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:120:27: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 120 | R(_R),w(_w),dw(_dw) {} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' is deprecated [-Wdeprecated-copy] 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:121:26: note: because 'KDL::RotationAcc' has user-provided 'KDL::RotationAcc& KDL::RotationAcc::operator=(const KDL::RotationAcc&)' 121 | IMETHOD RotationAcc& operator = (const RotationAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In copy constructor 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:110:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 110 | class RotationAcc | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: note: synthesized method 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' first required here 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::TwistAcc::TwistAcc(const KDL::VectorAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:267, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_pinv_nso.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:233:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 233 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:241:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 241 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:251:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 251 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:263:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 263 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/PropertyConstraintList.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 58%] Building CXX object src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/Constraint.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSketcher_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/.. -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Sketcher.dir/Constraint.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/Constraint.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureAddSub.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 58%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/TreeView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/TreeView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TreeView.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:117, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureAddSub.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl: In instantiation of 'PyTypeObject App::FeaturePythonPyT::Type': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:99:68: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 29 | PyTypeObject FeaturePythonPyT::Type = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/chainiksolvervel_wdls.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/chainiksolvervel_wdls.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.cpp [ 58%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeatureHole.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeatureHole.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureHole.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp: In member function 'virtual void Gui::TreeWidget::dragMoveEvent(QDragMoveEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:538:55: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 538 | if (!targetItem || this->isItemSelected(targetItem)) { | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:49: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp: In member function 'virtual void Gui::TreeWidget::dropEvent(QDropEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:678:40: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 678 | if (this->isItemSelected(targetItem)) | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:49: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ [ 58%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeatureBoolean.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeatureBoolean.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureBoolean.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp: In member function 'void Gui::DocumentItem::slotInEdit(const Gui::ViewProviderDocumentObject&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:1261:99: warning: 'void QTreeWidgetItem::setBackgroundColor(int, const QColor&)' is deprecated: Use QTreeWidgetItem::setBackground() instead [-Wdeprecated-declarations] 1261 | item->setBackgroundColor(0,QColor((col >> 24) & 0xff,(col >> 16) & 0xff,(col >> 8) & 0xff)); | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:49: /usr/include/qt5/QtWidgets/qtreewidget.h:142:17: note: declared here 142 | inline void setBackgroundColor(int column, const QColor &color) | ^~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 58%] Building CXX object src/Mod/Sketcher/App/CMakeFiles/Sketcher.dir/Sketch.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSketcher_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App/.. -I/usr/include/opencascade -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Sketcher.dir/Sketch.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/Sketch.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp: In lambda function: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:1556:48: warning: 'void QTreeWidgetItem::setBackgroundColor(int, const QColor&)' is deprecated: Use QTreeWidgetItem::setBackground() instead [-Wdeprecated-declarations] 1556 | item->setBackgroundColor(0, col); | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:49: /usr/include/qt5/QtWidgets/qtreewidget.h:142:17: note: declared here 142 | inline void setBackgroundColor(int column, const QColor &color) | ^~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp: In member function 'void Gui::DocumentItem::setObjectSelected(const char*, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:1711:51: warning: 'void QTreeWidget::setItemSelected(const QTreeWidgetItem*, bool)' is deprecated: Use QTreeWidgetItem::setSelected() instead [-Wdeprecated-declarations] 1711 | treeWidget()->setItemSelected(item, select); | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:49: /usr/include/qt5/QtWidgets/qtreewidget.h:322:10: note: declared here 322 | void setItemSelected(const QTreeWidgetItem *item, bool select); | ^~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp: In member function 'void Gui::DocumentItem::updateSelection()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:1729:46: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 1729 | if (treeWidget()->isItemSelected(item)) | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.cpp:49: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:150:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 150 | explicit RotationVel(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:151:64: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 151 | RotationVel(const Rotation& _R,const Vector& _w):R(_R),w(_w){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In member function 'KDL::Rotation KDL::RotationVel::value() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:154:37: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 154 | Rotation value() const { return R;} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' is deprecated [-Wdeprecated-copy] 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:158:26: note: because 'KDL::RotationVel' has user-provided 'KDL::RotationVel& KDL::RotationVel::operator=(const KDL::RotationVel&)' 158 | IMETHOD RotationVel& operator = (const RotationVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In copy constructor 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:139:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 139 | class RotationVel | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: note: synthesized method 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' first required here 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::TwistVel::TwistVel(const KDL::VectorVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:118:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 118 | explicit RotationAcc(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&, const KDL::Vector&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:120:27: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 120 | R(_R),w(_w),dw(_dw) {} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' is deprecated [-Wdeprecated-copy] 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:121:26: note: because 'KDL::RotationAcc' has user-provided 'KDL::RotationAcc& KDL::RotationAcc::operator=(const KDL::RotationAcc&)' 121 | IMETHOD RotationAcc& operator = (const RotationAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In copy constructor 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:110:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 110 | class RotationAcc | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: note: synthesized method 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' first required here 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::TwistAcc::TwistAcc(const KDL::VectorAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:267, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainiksolvervel_wdls.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:233:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 233 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:241:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 241 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:251:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 251 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:263:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 263 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ [ 58%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ProjectView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ProjectView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProjectView.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TreeView.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TreeView.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/chainjnttojacsolver.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/chainjnttojacsolver.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainjnttojacsolver.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainjnttojacsolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainjnttojacsolver.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainjnttojacsolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainjnttojacsolver.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainjnttojacsolver.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chainjnttojacsolver.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/frameacc.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/frameacc.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProjectView.cpp:27: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:118:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 118 | explicit RotationAcc(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&, const KDL::Vector&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:120:27: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 120 | R(_R),w(_w),dw(_dw) {} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' is deprecated [-Wdeprecated-copy] 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:121:26: note: because 'KDL::RotationAcc' has user-provided 'KDL::RotationAcc& KDL::RotationAcc::operator=(const KDL::RotationAcc&)' 121 | IMETHOD RotationAcc& operator = (const RotationAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In copy constructor 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:110:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 110 | class RotationAcc | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: note: synthesized method 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' first required here 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::TwistAcc::TwistAcc(const KDL::VectorAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:267, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:233:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 233 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:241:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 241 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:251:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 251 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:263:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 263 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ [ 58%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeaturePrimitive.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeaturePrimitive.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeaturePrimitive.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TreeView.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QMouseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TreeView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtension.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BodyBase.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/Body.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureBoolean.cpp:37: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureHole.cpp:57: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/frames.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/frames.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/frames_io.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/frames_io.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames_io.cpp [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/framevel.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/framevel.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:150:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 150 | explicit RotationVel(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:151:64: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 151 | RotationVel(const Rotation& _R,const Vector& _w):R(_R),w(_w){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In member function 'KDL::Rotation KDL::RotationVel::value() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:154:37: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 154 | Rotation value() const { return R;} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' is deprecated [-Wdeprecated-copy] 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:158:26: note: because 'KDL::RotationVel' has user-provided 'KDL::RotationVel& KDL::RotationVel::operator=(const KDL::RotationVel&)' 158 | IMETHOD RotationVel& operator = (const RotationVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In copy constructor 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:139:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 139 | class RotationVel | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: note: synthesized method 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' first required here 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::TwistVel::TwistVel(const KDL::VectorVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/jacobian.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/jacobian.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jacobian.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames_io.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames_io.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames_io.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jacobian.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jacobian.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jacobian.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jacobian.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jacobian.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jacobian.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 58%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeaturePipe.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeaturePipe.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeaturePipe.cpp [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/jntarray.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/jntarray.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/Sketch.cpp: In member function 'bool Sketcher::Sketch::hasDependentParameters(int, Sketcher::PointPos) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/Sketch.cpp:3672:13: warning: this statement may fall through [-Wimplicit-fallthrough=] 3672 | switch(pos) { // NOTE: points are added to all the cases, see addition. | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/Sketch.cpp:3679:9: note: here 3679 | case Line: | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/Sketch.cpp:3681:13: warning: this statement may fall through [-Wimplicit-fallthrough=] 3681 | switch(pos) { | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/Sketch.cpp:3688:9: note: here 3688 | case Arc: | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/Sketch.cpp:3690:13: warning: this statement may fall through [-Wimplicit-fallthrough=] 3690 | switch(pos) { | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/Sketch.cpp:3697:9: note: here 3697 | case Circle: | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/Sketch.cpp:3699:13: warning: this statement may fall through [-Wimplicit-fallthrough=] 3699 | switch(pos) { // NOTE: points are added to all the cases, see addition. | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/Sketch.cpp:3707:9: note: here 3707 | case Ellipse: | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/Sketch.cpp:3709:13: warning: this statement may fall through [-Wimplicit-fallthrough=] 3709 | switch(pos) { // NOTE: points are added to all the cases, see addition. | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/Sketch.cpp:3716:9: note: here 3716 | case ArcOfEllipse: | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/Sketch.cpp:3718:13: warning: this statement may fall through [-Wimplicit-fallthrough=] 3718 | switch(pos) { | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/Sketch.cpp:3725:9: note: here 3725 | case ArcOfHyperbola: | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/Sketch.cpp:3727:13: warning: this statement may fall through [-Wimplicit-fallthrough=] 3727 | switch(pos) { | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/Sketch.cpp:3734:9: note: here 3734 | case ArcOfParabola: | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/Sketch.cpp:3736:13: warning: this statement may fall through [-Wimplicit-fallthrough=] 3736 | switch(pos) { | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/Sketch.cpp:3743:9: note: here 3743 | case BSpline: | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/Sketch.cpp:3745:13: warning: this statement may fall through [-Wimplicit-fallthrough=] 3745 | switch(pos) { | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/Sketch.cpp:3752:9: note: here 3752 | case None: | ^~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/jntarrayacc.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/jntarrayacc.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureAddSub.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeaturePrimitive.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeaturePrimitive.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProjectView.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProjectView.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProjectView.cpp: In constructor 'Gui::ProjectWidget::ProjectWidget(QWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProjectView.cpp:60:35: warning: 'QDirModel::QDirModel(QObject*)' is deprecated: Use QFileSystemModel [-Wdeprecated-declarations] 60 | fileModel = new QDirModel(this); | ^ In file included from /usr/include/qt5/QtWidgets/QDirModel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProjectView.cpp:40: /usr/include/qt5/QtWidgets/qdirmodel.h:73:67: note: declared here 73 | QT_DEPRECATED_VERSION_X_5_15("Use QFileSystemModel") explicit QDirModel(QObject *parent = nullptr); | ^~~~~~~~~ [ 58%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeatureLoft.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeatureLoft.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureLoft.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:150:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 150 | explicit RotationVel(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:151:64: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 151 | RotationVel(const Rotation& _R,const Vector& _w):R(_R),w(_w){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In member function 'KDL::Rotation KDL::RotationVel::value() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:154:37: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 154 | Rotation value() const { return R;} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' is deprecated [-Wdeprecated-copy] 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:158:26: note: because 'KDL::RotationVel' has user-provided 'KDL::RotationVel& KDL::RotationVel::operator=(const KDL::RotationVel&)' 158 | IMETHOD RotationVel& operator = (const RotationVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In copy constructor 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:139:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 139 | class RotationVel | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: note: synthesized method 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' first required here 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::TwistVel::TwistVel(const KDL::VectorVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:118:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 118 | explicit RotationAcc(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&, const KDL::Vector&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:120:27: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 120 | R(_R),w(_w),dw(_dw) {} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' is deprecated [-Wdeprecated-copy] 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:121:26: note: because 'KDL::RotationAcc' has user-provided 'KDL::RotationAcc& KDL::RotationAcc::operator=(const KDL::RotationAcc&)' 121 | IMETHOD RotationAcc& operator = (const RotationAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In copy constructor 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:110:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 110 | class RotationAcc | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: note: synthesized method 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' first required here 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::TwistAcc::TwistAcc(const KDL::VectorAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:267, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:233:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 233 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:241:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 241 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:251:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 251 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:263:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 263 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/jntarrayvel.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/jntarrayvel.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeaturePrimitive.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:52:5: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 52 | }; \ | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeaturePrimitive.cpp:160:1: note: in expansion of macro 'PYTHON_TYPE_IMP' 160 | PYTHON_TYPE_IMP(PrimitivePy, PartDesign::FeaturePy) | ^~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:52:5: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] 52 | }; \ | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeaturePrimitive.cpp:160:1: note: in expansion of macro 'PYTHON_TYPE_IMP' 160 | PYTHON_TYPE_IMP(PrimitivePy, PartDesign::FeaturePy) | ^~~~~~~~~~~~~~~ [ 58%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DAGView/DAGView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DAGView/DAGView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DAGView/DAGView.cpp [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/jntspaceinertiamatrix.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/jntspaceinertiamatrix.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntspaceinertiamatrix.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntspaceinertiamatrix.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntspaceinertiamatrix.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntspaceinertiamatrix.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntspaceinertiamatrix.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntspaceinertiamatrix.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntspaceinertiamatrix.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:150:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 150 | explicit RotationVel(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::RotationVel::RotationVel(const KDL::Rotation&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:151:64: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 151 | RotationVel(const Rotation& _R,const Vector& _w):R(_R),w(_w){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In member function 'KDL::Rotation KDL::RotationVel::value() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:154:37: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 154 | Rotation value() const { return R;} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' is deprecated [-Wdeprecated-copy] 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:158:26: note: because 'KDL::RotationVel' has user-provided 'KDL::RotationVel& KDL::RotationVel::operator=(const KDL::RotationVel&)' 158 | IMETHOD RotationVel& operator = (const RotationVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In copy constructor 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:139:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 139 | class RotationVel | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::FrameVel::FrameVel(const KDL::RotationVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: note: synthesized method 'KDL::RotationVel::RotationVel(const KDL::RotationVel&)' first required here 218 | M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:218:19: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp: In constructor 'KDL::TwistVel::TwistVel(const KDL::VectorVel&, const KDL::VectorVel&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:264:77: warning: implicitly-declared 'KDL::VectorVel::VectorVel(const KDL::VectorVel&)' is deprecated [-Wdeprecated-copy] 264 | TwistVel(const VectorVel& _vel,const VectorVel& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/framevel.hpp:101:24: note: because 'KDL::VectorVel' has user-provided 'KDL::VectorVel& KDL::VectorVel::operator=(const KDL::VectorVel&)' 101 | IMETHOD VectorVel& operator = (const VectorVel& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:118:68: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 118 | explicit RotationAcc(const Rotation& _R):R(_R),w(Vector::Zero()){} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::RotationAcc::RotationAcc(const KDL::Rotation&, const KDL::Vector&, const KDL::Vector&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:120:27: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 120 | R(_R),w(_w),dw(_dw) {} | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' is deprecated [-Wdeprecated-copy] 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:121:26: note: because 'KDL::RotationAcc' has user-provided 'KDL::RotationAcc& KDL::RotationAcc::operator=(const KDL::RotationAcc&)' 121 | IMETHOD RotationAcc& operator = (const RotationAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In copy constructor 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:110:7: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 110 | class RotationAcc | ^~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarray.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::FrameAcc::FrameAcc(const KDL::RotationAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: note: synthesized method 'KDL::RotationAcc::RotationAcc(const KDL::RotationAcc&)' first required here 175 | FrameAcc(const RotationAcc& _M,const VectorAcc& _p):M(_M),p(_p) {} | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:175:67: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp: In constructor 'KDL::TwistAcc::TwistAcc(const KDL::VectorAcc&, const KDL::VectorAcc&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:217:78: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 217 | TwistAcc(const VectorAcc& _vel,const VectorAcc& _rot):vel(_vel),rot(_rot) {}; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:73:24: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 73 | IMETHOD VectorAcc& operator = (const VectorAcc& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.hpp:267, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayacc.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/jntarrayvel.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:233:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 233 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::Inverse(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:241:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 241 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::VectorAcc&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:251:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 251 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl: In member function 'KDL::VectorAcc KDL::RotationAcc::operator*(const KDL::Vector&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:263:12: warning: implicitly-declared 'KDL::VectorAcc::VectorAcc(const KDL::VectorAcc&)' is deprecated [-Wdeprecated-copy] 263 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frameacc.inl:92:12: note: because 'KDL::VectorAcc' has user-provided 'KDL::VectorAcc& KDL::VectorAcc::operator=(const KDL::VectorAcc&)' 92 | VectorAcc& VectorAcc::operator = (const VectorAcc& arg) { | ^~~~~~~~~ [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/joint.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/joint.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/joint.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeaturePipe.cpp:65: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/joint.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/joint.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/joint.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/joint.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/joint.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/joint.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/kinfam_io.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/kinfam_io.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/kinfam_io.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/joint.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/kinfam_io.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/kinfam_io.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/joint.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/kinfam_io.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/kinfam_io.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/joint.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/kinfam_io.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/kinfam_io.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 58%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DAGView/DAGModel.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DAGView/DAGModel.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DAGView/DAGModel.cpp [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/path.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/path.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/path_circle.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/path_circle.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_circle.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_circle.hpp:48, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_circle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_circle.hpp:48, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_circle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_circle.hpp:48, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_circle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureLoft.cpp:44: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 58%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/path_composite.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/path_composite.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_composite.cpp [ 59%] Linking CXX shared library ../../../../Mod/Sketcher/Sketcher.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/Sketcher.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,Sketcher.so -o ../../../../Mod/Sketcher/Sketcher.so CMakeFiles/Sketcher.dir/SketchObjectSF.cpp.o CMakeFiles/Sketcher.dir/SketchObject.cpp.o CMakeFiles/Sketcher.dir/SketchAnalysis.cpp.o CMakeFiles/Sketcher.dir/planegcs/GCS.cpp.o CMakeFiles/Sketcher.dir/planegcs/Geo.cpp.o CMakeFiles/Sketcher.dir/planegcs/Constraints.cpp.o CMakeFiles/Sketcher.dir/planegcs/SubSystem.cpp.o CMakeFiles/Sketcher.dir/planegcs/qp_eq.cpp.o CMakeFiles/Sketcher.dir/AppSketcher.cpp.o CMakeFiles/Sketcher.dir/AppSketcherPy.cpp.o CMakeFiles/Sketcher.dir/PreCompiled.cpp.o CMakeFiles/Sketcher.dir/SketchObjectSFPyImp.cpp.o CMakeFiles/Sketcher.dir/SketchObjectPyImp.cpp.o CMakeFiles/Sketcher.dir/ConstraintPyImp.cpp.o CMakeFiles/Sketcher.dir/SketchPyImp.cpp.o CMakeFiles/Sketcher.dir/PropertyConstraintList.cpp.o CMakeFiles/Sketcher.dir/Constraint.cpp.o CMakeFiles/Sketcher.dir/Sketch.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Part/Part.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so /usr/lib64/libfreetype.so In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_composite.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_composite.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_composite.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_composite.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_composite.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_composite.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 59%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/path_cyclic_closed.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/path_cyclic_closed.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_cyclic_closed.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_circle.cpp: In constructor 'KDL::Path_Circle::Path_Circle(const KDL::Frame&, const KDL::Vector&, const KDL::Vector&, const KDL::Rotation&, double, KDL::RotationalInterpolation*, double, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_circle.cpp:63:51: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 63 | orient->SetStartEnd(F_base_start.M,R_base_end); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_circle.hpp:48, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_circle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_circle.hpp:49, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_circle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotational_interpolation.hpp:68:37: note: initializing argument 1 of 'virtual void KDL::RotationalInterpolation::SetStartEnd(KDL::Rotation, KDL::Rotation)' 68 | virtual void SetStartEnd(Rotation start,Rotation end) = 0; | ~~~~~~~~~^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_circle.cpp:63:51: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 63 | orient->SetStartEnd(F_base_start.M,R_base_end); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_circle.hpp:48, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_circle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_circle.hpp:49, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_circle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotational_interpolation.hpp:68:52: note: initializing argument 2 of 'virtual void KDL::RotationalInterpolation::SetStartEnd(KDL::Rotation, KDL::Rotation)' 68 | virtual void SetStartEnd(Rotation start,Rotation end) = 0; | ~~~~~~~~~^~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_cyclic_closed.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_cyclic_closed.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_cyclic_closed.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_cyclic_closed.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_cyclic_closed.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_cyclic_closed.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 59%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/path_line.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/path_line.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DAGView/DAGModel.cpp:25: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.hpp:48, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.hpp:48, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.hpp:48, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 59%] Built target Sketcher /usr/bin/gmake -f src/Mod/Surface/App/CMakeFiles/Surface.dir/build.make src/Mod/Surface/App/CMakeFiles/Surface.dir/depend [ 59%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/path_point.cpp.o gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/App/CMakeFiles/Surface.dir/DependInfo.cmake --color= cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/path_point.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_point.cpp Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/App/CMakeFiles/Surface.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/App/CMakeFiles/Surface.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/App/CMakeFiles/Surface.dir/depend.internal". Scanning dependencies of target Surface gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Surface/App/CMakeFiles/Surface.dir/build.make src/Mod/Surface/App/CMakeFiles/Surface.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 59%] Building CXX object src/Mod/Surface/App/CMakeFiles/Surface.dir/AppSurface.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSurface_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Surface.dir/AppSurface.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/App/AppSurface.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_point.hpp:49, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_point.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_point.hpp:49, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_point.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_point.hpp:49, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_point.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 59%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/path_roundedcomposite.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/path_roundedcomposite.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_roundedcomposite.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_roundedcomposite.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_roundedcomposite.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_roundedcomposite.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_roundedcomposite.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_roundedcomposite.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_roundedcomposite.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.cpp: In constructor 'KDL::Path_Line::Path_Line(const KDL::Frame&, const KDL::Frame&, KDL::RotationalInterpolation*, double, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.cpp:60:42: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 60 | orient->SetStartEnd(startpos.M,endpos.M); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.hpp:48, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.hpp:49, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotational_interpolation.hpp:68:37: note: initializing argument 1 of 'virtual void KDL::RotationalInterpolation::SetStartEnd(KDL::Rotation, KDL::Rotation)' 68 | virtual void SetStartEnd(Rotation start,Rotation end) = 0; | ~~~~~~~~~^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.cpp:60:42: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 60 | orient->SetStartEnd(startpos.M,endpos.M); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.hpp:48, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.hpp:49, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotational_interpolation.hpp:68:52: note: initializing argument 2 of 'virtual void KDL::RotationalInterpolation::SetStartEnd(KDL::Rotation, KDL::Rotation)' 68 | virtual void SetStartEnd(Rotation start,Rotation end) = 0; | ~~~~~~~~~^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.cpp: In constructor 'KDL::Path_Line::Path_Line(const KDL::Frame&, const KDL::Twist&, KDL::RotationalInterpolation*, double, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.cpp:104:126: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 104 | orient->SetStartEnd(startpos.M, (startpos*Frame( Rotation::Rot(starttwist.rot, starttwist.rot.Norm() ), starttwist.vel )).M); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.hpp:48, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.hpp:49, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotational_interpolation.hpp:68:37: note: initializing argument 1 of 'virtual void KDL::RotationalInterpolation::SetStartEnd(KDL::Rotation, KDL::Rotation)' 68 | virtual void SetStartEnd(Rotation start,Rotation end) = 0; | ~~~~~~~~~^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.cpp:104:126: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 104 | orient->SetStartEnd(startpos.M, (startpos*Frame( Rotation::Rot(starttwist.rot, starttwist.rot.Norm() ), starttwist.vel )).M); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.hpp:48, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.hpp:49, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/path_line.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotational_interpolation.hpp:68:52: note: initializing argument 2 of 'virtual void KDL::RotationalInterpolation::SetStartEnd(KDL::Rotation, KDL::Rotation)' 68 | virtual void SetStartEnd(Rotation start,Rotation end) = 0; | ~~~~~~~~~^~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DAGView/DAGView.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 59%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/rigidbodyinertia.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/rigidbodyinertia.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rigidbodyinertia.cpp [ 59%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeatureDressUp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeatureDressUp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureDressUp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rigidbodyinertia.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rigidbodyinertia.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rigidbodyinertia.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rigidbodyinertia.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rigidbodyinertia.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rigidbodyinertia.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DAGView/DAGView.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qabstracteventdispatcher.h:43, from /usr/include/qt5/QtCore/QAbstractEventDispatcher:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DAGView/DAGView.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 59%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/rotational_interpolation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/rotational_interpolation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotational_interpolation.cpp [ 59%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DAGView/DAGRectItem.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DAGView/DAGRectItem.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DAGView/DAGRectItem.cpp [ 59%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/rotational_interpolation_sa.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/rotational_interpolation_sa.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotational_interpolation_sa.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotational_interpolation.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotational_interpolation.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotational_interpolation.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotational_interpolation.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotational_interpolation.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotational_interpolation.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotational_interpolation_sa.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotational_interpolation_sa.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotational_interpolation_sa.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotational_interpolation_sa.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotational_interpolation_sa.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotational_interpolation_sa.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 59%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/rotationalinertia.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/rotationalinertia.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotationalinertia.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotationalinertia.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotationalinertia.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotationalinertia.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotationalinertia.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotationalinertia.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/rotationalinertia.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 59%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/segment.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/segment.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.cpp:20: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.cpp:20: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.cpp:20: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartSpline.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/App/FeatureFilling.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/App/AppSurface.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DAGView/DAGModel.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DAGView/DAGModel.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 59%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DAGView/DAGModelGraph.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DAGView/DAGModelGraph.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DAGView/DAGModelGraph.cpp [ 60%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/trajectory.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/trajectory.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/Feature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureDressUp.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureDressUp.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 60%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/trajectory_composite.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/trajectory_composite.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory_composite.cpp [ 60%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/trajectory_segment.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/trajectory_segment.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory_segment.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory_composite.hpp:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory_composite.cpp:16: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory_composite.hpp:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory_composite.cpp:16: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory_composite.hpp:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory_composite.cpp:16: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory_segment.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory_segment.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory_segment.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory_segment.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory_segment.hpp:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory_segment.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 60%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/trajectory_stationary.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/trajectory_stationary.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory_stationary.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory_stationary.hpp:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory_stationary.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory_stationary.hpp:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory_stationary.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory_stationary.hpp:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory_stationary.cpp:17: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 60%] Building CXX object src/Mod/Surface/App/CMakeFiles/Surface.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSurface_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Surface.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/App/PreCompiled.cpp [ 60%] Building CXX object src/Mod/Surface/App/CMakeFiles/Surface.dir/FeatureExtend.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSurface_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Surface.dir/FeatureExtend.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/App/FeatureExtend.cpp [ 60%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DAGView/DAGFilter.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DAGView/DAGFilter.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DAGView/DAGFilter.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/property_map/vector_property_map.hpp:14, from /usr/include/boost/property_map/property_map.hpp:602, from /usr/include/boost/graph/adjacency_list.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DAGView/DAGModelGraph.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DAGView/DAGModelGraph.cpp:27: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 60%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/tree.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/tree.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.cpp [ 60%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/treefksolverpos_recursive.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/treefksolverpos_recursive.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treefksolverpos_recursive.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ /usr/bin/gmake -f src/Mod/Import/App/CMakeFiles/Import.dir/build.make src/Mod/Import/App/CMakeFiles/Import.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App/CMakeFiles/Import.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App/CMakeFiles/Import.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App/CMakeFiles/Import.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App/CMakeFiles/Import.dir/depend.internal". Scanning dependencies of target Import gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Import/App/CMakeFiles/Import.dir/build.make src/Mod/Import/App/CMakeFiles/Import.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 60%] Building CXX object src/Mod/Import/App/CMakeFiles/Import.dir/AppImport.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DImport_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Import.dir/AppImport.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/AppImport.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treefksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treefksolverpos_recursive.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treefksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treefksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treefksolverpos_recursive.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treefksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treefksolver.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treefksolverpos_recursive.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treefksolverpos_recursive.cpp:23: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 60%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeatureFillet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeatureFillet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureFillet.cpp [ 60%] Building CXX object src/Mod/Import/App/CMakeFiles/Import.dir/AppImportPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DImport_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Import.dir/AppImportPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/AppImportPy.cpp [ 60%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/treeiksolverpos_nr_jl.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/treeiksolverpos_nr_jl.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolverpos_nr_jl.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolver.hpp:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolver.hpp:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolver.hpp:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolverpos_nr_jl.hpp:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolverpos_nr_jl.cpp:24: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 60%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/treeiksolverpos_online.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/treeiksolverpos_online.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolverpos_online.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolver.hpp:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolverpos_online.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolverpos_online.cpp:25: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolver.hpp:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolverpos_online.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolverpos_online.cpp:25: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolver.hpp:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolverpos_online.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolverpos_online.cpp:25: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartSpline.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/App/FeatureExtend.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/App/FeatureExtend.cpp:38: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 60%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/CallTips.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/CallTips.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CallTips.cpp [ 60%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/treeiksolvervel_wdls.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/treeiksolvervel_wdls.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolvervel_wdls.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolver.hpp:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolvervel_wdls.hpp:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolvervel_wdls.cpp:8: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolver.hpp:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolvervel_wdls.hpp:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolvervel_wdls.cpp:8: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolver.hpp:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolvervel_wdls.hpp:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treeiksolvervel_wdls.cpp:8: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtension.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Part.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/ImportOCAF.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/AppImportPy.cpp:59: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/Feature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureDressUp.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureFillet.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureFillet.cpp:44: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 60%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/treejnttojacsolver.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/treejnttojacsolver.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treejnttojacsolver.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DAGView/DAGFilter.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treejnttojacsolver.hpp:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treejnttojacsolver.cpp:8: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treejnttojacsolver.hpp:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treejnttojacsolver.cpp:8: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/tree.hpp:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treejnttojacsolver.hpp:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/treejnttojacsolver.cpp:8: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 60%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/velocityprofile.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/velocityprofile.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/velocityprofile.cpp [ 60%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/velocityprofile_dirac.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/velocityprofile_dirac.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/velocityprofile_dirac.cpp [ 60%] Building CXX object src/Mod/Surface/App/CMakeFiles/Surface.dir/FeatureGeomFillSurface.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSurface_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Surface.dir/FeatureGeomFillSurface.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/App/FeatureGeomFillSurface.cpp [ 60%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/velocityprofile_rect.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/velocityprofile_rect.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/velocityprofile_rect.cpp [ 60%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/velocityprofile_spline.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/velocityprofile_spline.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/velocityprofile_spline.cpp [ 60%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeatureChamfer.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeatureChamfer.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureChamfer.cpp [ 60%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/EditorView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/EditorView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp [ 60%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/TextDocumentEditorView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/TextDocumentEditorView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextDocumentEditorView.cpp [ 60%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/velocityprofile_trap.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/velocityprofile_trap.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/velocityprofile_trap.cpp [ 60%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/velocityprofile_traphalf.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/velocityprofile_traphalf.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/velocityprofile_traphalf.cpp [ 60%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeatureDraft.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeatureDraft.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureDraft.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CallTips.cpp:41: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 60%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/utilities/error_stack.cxx.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/utilities/error_stack.cxx.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/error_stack.cxx In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CallTips.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CallTips.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CallTips.cpp: In member function 'virtual void Gui::CallTipsList::keyboardSearch(const QString&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CallTips.cpp:146:41: warning: 'void QListWidget::setItemSelected(const QListWidgetItem*, bool)' is deprecated: Use QListWidgetItem::setSelected() instead [-Wdeprecated-declarations] 146 | setItemSelected(currentItem(), false); | ^ In file included from /usr/include/qt5/QtWidgets/QListWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CallTips.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CallTips.cpp:48: /usr/include/qt5/QtWidgets/qlistwidget.h:263:10: note: declared here 263 | void setItemSelected(const QListWidgetItem *item, bool select); | ^~~~~~~~~~~~~~~ [ 60%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/utilities/svd_HH.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/utilities/svd_HH.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/svd_HH.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CallTips.cpp: In member function 'void Gui::CallTipsList::showTips(const QString&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CallTips.cpp:525:67: warning: 'QVariant qVariantFromValue(const T&) [with T = Gui::CallTip]' is deprecated: Use QVariant::fromValue() instead. [-Wdeprecated-declarations] 525 | item->setData(Qt::UserRole, qVariantFromValue( it.value() )); //< store full CallTip data | ^ In file included from /usr/include/qt5/QtCore/qlocale.h:43, from /usr/include/qt5/QtGui/qguiapplication.h:47, from /usr/include/qt5/QtWidgets/qapplication.h:52, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CallTips.cpp:27: /usr/include/qt5/QtCore/qvariant.h:530:17: note: declared here 530 | inline QVariant qVariantFromValue(const T &t) | ^~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CallTips.cpp: In member function 'void Gui::CallTipsList::callTipItemActivated(QListWidgetItem*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CallTips.cpp:699:29: warning: 'bool QListWidget::isItemSelected(const QListWidgetItem*) const' is deprecated: Use QListWidgetItem::isSelected() instead [-Wdeprecated-declarations] 699 | if (!isItemSelected(item)) return; | ^ In file included from /usr/include/qt5/QtWidgets/QListWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CallTips.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CallTips.cpp:48: /usr/include/qt5/QtWidgets/qlistwidget.h:261:10: note: declared here 261 | bool isItemSelected(const QListWidgetItem *item) const; | ^~~~~~~~~~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextDocumentEditorView.cpp:27: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/../frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/../jacobian.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/svd_HH.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/svd_HH.cpp:25: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/../frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/../frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/../jacobian.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/svd_HH.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/svd_HH.cpp:25: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/../frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/../frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/../jacobian.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/svd_HH.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/svd_HH.cpp:25: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/../frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/../frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/../frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/../frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/../frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/../frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/../frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/../frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 60%] Building CXX object src/Mod/Import/App/CMakeFiles/Import.dir/ExportOCAF.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DImport_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Import.dir/ExportOCAF.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/ExportOCAF.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/App/FeatureGeomFillSurface.cpp:53: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/Feature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureDressUp.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureChamfer.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureChamfer.cpp:46: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 60%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/utilities/svd_eigen_HH.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/utilities/svd_eigen_HH.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/svd_eigen_HH.cpp /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginFeature.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureDraft.cpp:50: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /usr/bin/gmake -f src/Mod/Inspection/App/CMakeFiles/Inspection.dir/build.make src/Mod/Inspection/App/CMakeFiles/Inspection.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 60%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Inspection/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Inspection/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/App/CMakeFiles/Inspection.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/App/CMakeFiles/Inspection.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/App/CMakeFiles/Inspection.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/App/CMakeFiles/Inspection.dir/depend.internal". Scanning dependencies of target Inspection gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Inspection/App/CMakeFiles/Inspection.dir/build.make src/Mod/Inspection/App/CMakeFiles/Inspection.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 60%] Building CXX object src/Mod/Inspection/App/CMakeFiles/Inspection.dir/AppInspection.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DInspection_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Inspection.dir/AppInspection.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/AppInspection.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp:44: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 60%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/utilities/utility.cxx.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/utilities/utility.cxx.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/utility.cxx [ 60%] Building CXX object src/Mod/Robot/App/CMakeFiles/Robot.dir/kdl_cp/utilities/utility_io.cxx.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DKDL_USE_NEW_TREE_INTERFACE=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DRobot_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Robot.dir/kdl_cp/utilities/utility_io.cxx.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/utilities/utility_io.cxx In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextDocumentEditorView.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextDocumentEditorView.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qabstracttextdocumentlayout.h:43, from /usr/include/qt5/QtGui/QAbstractTextDocumentLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qabstracttextdocumentlayout.h:43, from /usr/include/qt5/QtGui/QAbstractTextDocumentLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qabstracttextdocumentlayout.h:43, from /usr/include/qt5/QtGui/QAbstractTextDocumentLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qabstracttextdocumentlayout.h:43, from /usr/include/qt5/QtGui/QAbstractTextDocumentLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 60%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeatureThickness.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeatureThickness.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureThickness.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp: In constructor 'Gui::EditorView::EditorView(QPlainTextEdit*, QWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp:80:54: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 80 | : MDIView(0,parent,0), WindowParameter( "Editor" ) | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qabstracttextdocumentlayout.h:43, from /usr/include/qt5/QtGui/QAbstractTextDocumentLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp: In member function 'bool Gui::EditorView::saveAs()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp:274:18: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 274 | QString::null, QString::fromLatin1("%1 (*.FCMacro);;Python (*.py)").arg(tr("FreeCAD macro"))); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtGui/qabstracttextdocumentlayout.h:44, from /usr/include/qt5/QtGui/QAbstractTextDocumentLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp:274:18: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 274 | QString::null, QString::fromLatin1("%1 (*.FCMacro);;Python (*.py)").arg(tr("FreeCAD macro"))); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtGui/qabstracttextdocumentlayout.h:44, from /usr/include/qt5/QtGui/QAbstractTextDocumentLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp:274:101: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 274 | QString::null, QString::fromLatin1("%1 (*.FCMacro);;Python (*.py)").arg(tr("FreeCAD macro"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qabstracttextdocumentlayout.h:43, from /usr/include/qt5/QtGui/QAbstractTextDocumentLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp: In member function 'virtual void Gui::EditorView::printPdf()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp:397:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 397 | QString::fromLatin1("%1 (*.pdf)").arg(tr("PDF file"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qabstracttextdocumentlayout.h:43, from /usr/include/qt5/QtGui/QAbstractTextDocumentLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextDocumentEditorView.cpp: In constructor 'Gui::TextDocumentEditorView::TextDocumentEditorView(App::TextDocument*, QPlainTextEdit*, QWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextDocumentEditorView.cpp:49:37: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 49 | editor {e}, textDocument {txtDoc} | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextDocumentEditorView.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 60%] Linking CXX shared library ../../../../Mod/Robot/Robot.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/Robot.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,Robot.so -o ../../../../Mod/Robot/Robot.so CMakeFiles/Robot.dir/RobotObject.cpp.o CMakeFiles/Robot.dir/TrajectoryObject.cpp.o CMakeFiles/Robot.dir/TrajectoryDressUpObject.cpp.o CMakeFiles/Robot.dir/TrajectoryCompound.cpp.o CMakeFiles/Robot.dir/Edge2TracObject.cpp.o CMakeFiles/Robot.dir/PropertyTrajectory.cpp.o CMakeFiles/Robot.dir/RobotAlgos.cpp.o CMakeFiles/Robot.dir/Robot6Axis.cpp.o CMakeFiles/Robot.dir/Trajectory.cpp.o CMakeFiles/Robot.dir/Simulation.cpp.o CMakeFiles/Robot.dir/Waypoint.cpp.o CMakeFiles/Robot.dir/AppRobot.cpp.o CMakeFiles/Robot.dir/PreCompiled.cpp.o CMakeFiles/Robot.dir/Robot6AxisPyImp.cpp.o CMakeFiles/Robot.dir/TrajectoryPyImp.cpp.o CMakeFiles/Robot.dir/RobotObjectPyImp.cpp.o CMakeFiles/Robot.dir/WaypointPyImp.cpp.o CMakeFiles/Robot.dir/kdl_cp/articulatedbodyinertia.cpp.o CMakeFiles/Robot.dir/kdl_cp/chain.cpp.o CMakeFiles/Robot.dir/kdl_cp/chaindynparam.cpp.o CMakeFiles/Robot.dir/kdl_cp/chainfksolverpos_recursive.cpp.o CMakeFiles/Robot.dir/kdl_cp/chainfksolvervel_recursive.cpp.o CMakeFiles/Robot.dir/kdl_cp/chainidsolver_recursive_newton_euler.cpp.o CMakeFiles/Robot.dir/kdl_cp/chainidsolver_vereshchagin.cpp.o CMakeFiles/Robot.dir/kdl_cp/chainiksolverpos_lma.cpp.o CMakeFiles/Robot.dir/kdl_cp/chainiksolverpos_nr.cpp.o CMakeFiles/Robot.dir/kdl_cp/chainiksolverpos_nr_jl.cpp.o CMakeFiles/Robot.dir/kdl_cp/chainiksolvervel_pinv.cpp.o CMakeFiles/Robot.dir/kdl_cp/chainiksolvervel_pinv_givens.cpp.o CMakeFiles/Robot.dir/kdl_cp/chainiksolvervel_pinv_nso.cpp.o CMakeFiles/Robot.dir/kdl_cp/chainiksolvervel_wdls.cpp.o CMakeFiles/Robot.dir/kdl_cp/chainjnttojacsolver.cpp.o CMakeFiles/Robot.dir/kdl_cp/frameacc.cpp.o CMakeFiles/Robot.dir/kdl_cp/frames.cpp.o CMakeFiles/Robot.dir/kdl_cp/frames_io.cpp.o CMakeFiles/Robot.dir/kdl_cp/framevel.cpp.o CMakeFiles/Robot.dir/kdl_cp/jacobian.cpp.o CMakeFiles/Robot.dir/kdl_cp/jntarray.cpp.o CMakeFiles/Robot.dir/kdl_cp/jntarrayacc.cpp.o CMakeFiles/Robot.dir/kdl_cp/jntarrayvel.cpp.o CMakeFiles/Robot.dir/kdl_cp/jntspaceinertiamatrix.cpp.o CMakeFiles/Robot.dir/kdl_cp/joint.cpp.o CMakeFiles/Robot.dir/kdl_cp/kinfam_io.cpp.o CMakeFiles/Robot.dir/kdl_cp/path.cpp.o CMakeFiles/Robot.dir/kdl_cp/path_circle.cpp.o CMakeFiles/Robot.dir/kdl_cp/path_composite.cpp.o CMakeFiles/Robot.dir/kdl_cp/path_cyclic_closed.cpp.o CMakeFiles/Robot.dir/kdl_cp/path_line.cpp.o CMakeFiles/Robot.dir/kdl_cp/path_point.cpp.o CMakeFiles/Robot.dir/kdl_cp/path_roundedcomposite.cpp.o CMakeFiles/Robot.dir/kdl_cp/rigidbodyinertia.cpp.o CMakeFiles/Robot.dir/kdl_cp/rotational_interpolation.cpp.o CMakeFiles/Robot.dir/kdl_cp/rotational_interpolation_sa.cpp.o CMakeFiles/Robot.dir/kdl_cp/rotationalinertia.cpp.o CMakeFiles/Robot.dir/kdl_cp/segment.cpp.o CMakeFiles/Robot.dir/kdl_cp/trajectory.cpp.o CMakeFiles/Robot.dir/kdl_cp/trajectory_composite.cpp.o CMakeFiles/Robot.dir/kdl_cp/trajectory_segment.cpp.o CMakeFiles/Robot.dir/kdl_cp/trajectory_stationary.cpp.o CMakeFiles/Robot.dir/kdl_cp/tree.cpp.o CMakeFiles/Robot.dir/kdl_cp/treefksolverpos_recursive.cpp.o CMakeFiles/Robot.dir/kdl_cp/treeiksolverpos_nr_jl.cpp.o CMakeFiles/Robot.dir/kdl_cp/treeiksolverpos_online.cpp.o CMakeFiles/Robot.dir/kdl_cp/treeiksolvervel_wdls.cpp.o CMakeFiles/Robot.dir/kdl_cp/treejnttojacsolver.cpp.o CMakeFiles/Robot.dir/kdl_cp/velocityprofile.cpp.o CMakeFiles/Robot.dir/kdl_cp/velocityprofile_dirac.cpp.o CMakeFiles/Robot.dir/kdl_cp/velocityprofile_rect.cpp.o CMakeFiles/Robot.dir/kdl_cp/velocityprofile_spline.cpp.o CMakeFiles/Robot.dir/kdl_cp/velocityprofile_trap.cpp.o CMakeFiles/Robot.dir/kdl_cp/velocityprofile_traphalf.cpp.o CMakeFiles/Robot.dir/kdl_cp/utilities/error_stack.cxx.o CMakeFiles/Robot.dir/kdl_cp/utilities/svd_HH.cpp.o CMakeFiles/Robot.dir/kdl_cp/utilities/svd_eigen_HH.cpp.o CMakeFiles/Robot.dir/kdl_cp/utilities/utility.cxx.o CMakeFiles/Robot.dir/kdl_cp/utilities/utility_io.cxx.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Part/Part.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so /usr/lib64/libfreetype.so [ 60%] Building CXX object src/Mod/Surface/App/CMakeFiles/Surface.dir/FeatureFilling.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSurface_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Surface.dir/FeatureFilling.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/App/FeatureFilling.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/InspectionFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/AppInspection.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/ExportOCAF.cpp:85: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 60%] Built target Robot /usr/bin/gmake -f src/Mod/Fem/App/CMakeFiles/Fem.dir/build.make src/Mod/Fem/App/CMakeFiles/Fem.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App/CMakeFiles/Fem.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App/CMakeFiles/Fem.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App/CMakeFiles/Fem.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App/CMakeFiles/Fem.dir/depend.internal". Scanning dependencies of target Fem gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Fem/App/CMakeFiles/Fem.dir/build.make src/Mod/Fem/App/CMakeFiles/Fem.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 60%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemMeshObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemMeshObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemMeshObject.cpp [ 60%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/PythonConsole.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/PythonConsole.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp [ 60%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/PythonConsolePy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/PythonConsolePy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsolePy.cpp [ 61%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/PythonDebugger.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/PythonDebugger.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonDebugger.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/Feature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureDressUp.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureThickness.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureThickness.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeaturePartSpline.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/App/FeatureFilling.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/App/FeatureFilling.cpp:37: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemMeshObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemMeshObject.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 61%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/AppPartDesign.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/AppPartDesign.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/AppPartDesign.cpp [ 61%] Building CXX object src/Mod/Import/App/CMakeFiles/Import.dir/ImportOCAF.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DImport_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Import.dir/ImportOCAF.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/ImportOCAF.cpp [ 61%] Building CXX object src/Mod/Inspection/App/CMakeFiles/Inspection.dir/InspectionFeature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DInspection_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Inspection.dir/InspectionFeature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/InspectionFeature.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h: In member function 'void Gui::Dialog::Ui_DlgEditorSettings::setupUi(QWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h:214:38: warning: 'void QTextEdit::setTabStopWidth(int)' is deprecated [-Wdeprecated-declarations] 214 | textEdit1->setTabStopWidth(40); | ^ In file included from /usr/include/qt5/QtWidgets/qplaintextedit.h:44, from /usr/include/qt5/QtWidgets/QPlainTextEdit:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextEdit.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonEditor.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:43: /usr/include/qt5/QtWidgets/qtextedit.h:203:24: note: declared here 203 | QT_DEPRECATED void setTabStopWidth(int width); | ^~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp: In member function 'virtual void Gui::PythonConsole::OnChange(Base::Subject&, const char*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:512:55: warning: 'int QFontMetrics::width(const QString&, int) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 512 | int width = metric.width(QLatin1String("0000")); | ^ In file included from /usr/include/qt5/QtWidgets/qwidget.h:50, from /usr/include/qt5/QtWidgets/qdockwidget.h:44, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:28: /usr/include/qt5/QtGui/qfontmetrics.h:106:9: note: declared here 106 | int width(const QString &, int len = -1) const; | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:513:30: warning: 'void QPlainTextEdit::setTabStopWidth(int)' is deprecated [-Wdeprecated-declarations] 513 | setTabStopWidth(width); | ^ In file included from /usr/include/qt5/QtWidgets/QPlainTextEdit:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextEdit.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonEditor.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:43: /usr/include/qt5/QtWidgets/qplaintextedit.h:179:24: note: declared here 179 | QT_DEPRECATED void setTabStopWidth(int width); | ^~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp: In member function 'void Gui::PythonConsole::printPrompt(Gui::PythonConsole::Prompt)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:720:30: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 720 | d->output = QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:720:30: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 720 | d->output = QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:726:29: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 726 | d->error = QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:726:29: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 726 | d->error = QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp: In member function 'void Gui::PythonConsole::onSaveHistoryAs()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:1300:74: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 1300 | QString::fromLatin1("%1 (*.FCMacro *.py)").arg(tr("Macro Files"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp: In member function 'void Gui::PythonConsole::onInsertFileName()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:1318:106: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 1318 | QString fn = Gui::FileDialog::getOpenFileName(Gui::getMainWindow(), tr("Insert file name"), QString::null, | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:1318:106: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 1318 | QString fn = Gui::FileDialog::getOpenFileName(Gui::getMainWindow(), tr("Insert file name"), QString::null, | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:1319:61: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 1319 | QString::fromLatin1("%1 (*.*)").arg(tr("All Files"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonConsole.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:117, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemMeshObject.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl: In instantiation of 'PyTypeObject App::FeaturePythonPyT::Type': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:99:68: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 29 | PyTypeObject FeaturePythonPyT::Type = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 61%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/PythonEditor.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/PythonEditor.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonEditor.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/InspectionFeature.cpp:38: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 61%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemMeshShapeObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemMeshShapeObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemMeshShapeObject.cpp [ 61%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SyntaxHighlighter.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SyntaxHighlighter.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SyntaxHighlighter.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Part2DObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureSketchBased.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeaturePad.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/AppPartDesign.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonDebugger.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/EditorView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonDebugger.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qeventloop.h:43, from /usr/include/qt5/QtCore/QEventLoop:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonDebugger.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 61%] Building CXX object src/Mod/Surface/App/CMakeFiles/Surface.dir/FeatureSewing.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSurface_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Surface.dir/FeatureSewing.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/App/FeatureSewing.cpp [ 61%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/AppPartDesignPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/AppPartDesignPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/AppPartDesignPy.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/ImportOCAF.cpp:85: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 61%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/TextEdit.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/TextEdit.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextEdit.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/InspectionFeature.cpp: In member function 'virtual void Inspection::PropertyDistanceList::Save(Base::Writer&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/InspectionFeature.cpp:574:91: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 574 | writer.Stream() << writer.ind() << "" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/qresultstore.h:44, from /usr/include/qt5/QtCore/qfutureinterface.h:46, from /usr/include/qt5/QtCore/qfuture.h:45, from /usr/include/qt5/QtCore/QFuture:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/InspectionFeature.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/InspectionFeature.cpp:574:91: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 574 | writer.Stream() << writer.ind() << "" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/qresultstore.h:44, from /usr/include/qt5/QtCore/qfutureinterface.h:46, from /usr/include/qt5/QtCore/qfuture.h:45, from /usr/include/qt5/QtCore/QFuture:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/InspectionFeature.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/InspectionFeature.cpp:574:91: warning: the address of 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' will never be NULL [-Waddress] 574 | writer.Stream() << writer.ind() << "" << endl; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/InspectionFeature.cpp:577:89: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 577 | writer.Stream() << writer.ind() << "" << endl; ; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/qresultstore.h:44, from /usr/include/qt5/QtCore/qfutureinterface.h:46, from /usr/include/qt5/QtCore/qfuture.h:45, from /usr/include/qt5/QtCore/QFuture:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/InspectionFeature.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/InspectionFeature.cpp:577:89: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 577 | writer.Stream() << writer.ind() << "" << endl; ; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/qresultstore.h:44, from /usr/include/qt5/QtCore/qfutureinterface.h:46, from /usr/include/qt5/QtCore/qfuture.h:45, from /usr/include/qt5/QtCore/QFuture:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/InspectionFeature.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/InspectionFeature.cpp:577:89: warning: the address of 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' will never be NULL [-Waddress] 577 | writer.Stream() << writer.ind() << "" << endl; ; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/InspectionFeature.cpp:579:61: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 579 | writer.Stream() << writer.ind() <<"" << endl ; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/qresultstore.h:44, from /usr/include/qt5/QtCore/qfutureinterface.h:46, from /usr/include/qt5/QtCore/qfuture.h:45, from /usr/include/qt5/QtCore/QFuture:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/InspectionFeature.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/InspectionFeature.cpp:579:61: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 579 | writer.Stream() << writer.ind() <<"" << endl ; | ^~~~ In file included from /usr/include/qt5/QtCore/qdebug.h:49, from /usr/include/qt5/QtCore/qresultstore.h:44, from /usr/include/qt5/QtCore/qfutureinterface.h:46, from /usr/include/qt5/QtCore/qfuture.h:45, from /usr/include/qt5/QtCore/QFuture:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/InspectionFeature.cpp:34: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/InspectionFeature.cpp:579:61: warning: the address of 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' will never be NULL [-Waddress] 579 | writer.Stream() << writer.ind() <<"" << endl ; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonEditor.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonEditor.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonEditor.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonEditor.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonEditor.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonEditor.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonEditor.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonEditor.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonEditor.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonEditor.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditorImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonEditor.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h: In member function 'void Gui::Dialog::Ui_DlgEditorSettings::setupUi(QWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgEditor.h:214:38: warning: 'void QTextEdit::setTabStopWidth(int)' is deprecated [-Wdeprecated-declarations] 214 | textEdit1->setTabStopWidth(40); | ^ In file included from /usr/include/qt5/QtWidgets/qplaintextedit.h:44, from /usr/include/qt5/QtWidgets/QPlainTextEdit:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextEdit.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonEditor.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonEditor.cpp:33: /usr/include/qt5/QtWidgets/qtextedit.h:203:24: note: declared here 203 | QT_DEPRECATED void setTabStopWidth(int width); | ^~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextEdit.cpp: In member function 'int Gui::TextEditor::lineNumberAreaWidth()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextEdit.cpp:242:53: warning: 'int QFontMetrics::width(const QString&, int) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 242 | return fontMetrics().width(QLatin1String("0000"))+10; | ^ In file included from /usr/include/qt5/QtGui/qpainter.h:59, from /usr/include/qt5/QtGui/QPainter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextEdit.cpp:28: /usr/include/qt5/QtGui/qfontmetrics.h:106:9: note: declared here 106 | int width(const QString &, int len = -1) const; | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextEdit.cpp: In member function 'virtual void Gui::TextEditor::OnChange(Base::Subject&, const char*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextEdit.cpp:452:55: warning: 'int QFontMetrics::width(const QString&, int) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 452 | int fontSize = metric.width(QLatin1String("0")); | ^ In file included from /usr/include/qt5/QtGui/qpainter.h:59, from /usr/include/qt5/QtGui/QPainter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextEdit.cpp:28: /usr/include/qt5/QtGui/qfontmetrics.h:106:9: note: declared here 106 | int width(const QString &, int len = -1) const; | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextEdit.cpp:453:44: warning: 'void QPlainTextEdit::setTabStopWidth(int)' is deprecated [-Wdeprecated-declarations] 453 | setTabStopWidth(tabWidth * fontSize); | ^ In file included from /usr/include/qt5/QtWidgets/QPlainTextEdit:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextEdit.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextEdit.cpp:33: /usr/include/qt5/QtWidgets/qplaintextedit.h:179:24: note: declared here 179 | QT_DEPRECATED void setTabStopWidth(int width); | ^~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextEdit.cpp: In member function 'void Gui::CompletionList::findCurrentWord(const QString&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextEdit.cpp:521:41: warning: 'void QListWidget::setItemSelected(const QListWidgetItem*, bool)' is deprecated: Use QListWidgetItem::setSelected() instead [-Wdeprecated-declarations] 521 | setItemSelected(currentItem(), false); | ^ In file included from /usr/include/qt5/QtWidgets/QListWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextEdit.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextEdit.cpp:33: /usr/include/qt5/QtWidgets/qlistwidget.h:263:10: note: declared here 263 | void setItemSelected(const QListWidgetItem *item, bool select); | ^~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemMeshObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemMeshShapeObject.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemMeshShapeObject.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 61%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/PreCompiled.cpp [ 61%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/BodyPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/BodyPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/BodyPyImp.cpp [ 61%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Assistant.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Assistant.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Assistant.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/App/FeatureSewing.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/App/FeatureSewing.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /usr/bin/gmake -f src/Mod/Path/App/CMakeFiles/Path.dir/build.make src/Mod/Path/App/CMakeFiles/Path.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/CMakeFiles/Path.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/CMakeFiles/Path.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/CMakeFiles/Path.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/CMakeFiles/Path.dir/depend.internal". [ 61%] Building CXX object src/Mod/Inspection/App/CMakeFiles/Inspection.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DInspection_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Inspection.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/App/PreCompiled.cpp Scanning dependencies of target Path gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Path/App/CMakeFiles/Path.dir/build.make src/Mod/Path/App/CMakeFiles/Path.dir/build [ 61%] Linking CXX shared library ../../../../Mod/Inspection/Inspection.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/Inspection.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,Inspection.so -o ../../../../Mod/Inspection/Inspection.so CMakeFiles/Inspection.dir/AppInspection.cpp.o CMakeFiles/Inspection.dir/InspectionFeature.cpp.o CMakeFiles/Inspection.dir/PreCompiled.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Mesh:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Points:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Mesh/Mesh.so ../../../../Mod/Points/Points.so ../../../../Mod/Part/Part.so /usr/lib64/libQt5Concurrent.so.5.15.2 ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so /usr/lib64/libfreetype.so gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 61%] Building CXX object src/Mod/Path/App/CMakeFiles/Path.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPath_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -fext-numeric-literals -pthread -fPIC -o CMakeFiles/Path.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Command.cpp [ 61%] Building CXX object src/Mod/Import/App/CMakeFiles/Import.dir/StepShape.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DImport_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Import.dir/StepShape.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/StepShape.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 61%] Built target Inspection /usr/bin/gmake -f src/Mod/Measure/App/CMakeFiles/Measure.dir/build.make src/Mod/Measure/App/CMakeFiles/Measure.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 61%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Measure/Init.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Measure/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Measure/App && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Measure/Init.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Measure/Init.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Measure/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Measure/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Measure/App/CMakeFiles/Measure.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Measure/App/CMakeFiles/Measure.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Measure/App/CMakeFiles/Measure.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Measure/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Measure/App/CMakeFiles/Measure.dir/depend.internal". Scanning dependencies of target Measure gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Measure/App/CMakeFiles/Measure.dir/build.make src/Mod/Measure/App/CMakeFiles/Measure.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 61%] Building CXX object src/Mod/Measure/App/CMakeFiles/Measure.dir/AppMeasure.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Measure/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMeasure_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Measure/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Measure.dir/AppMeasure.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Measure/App/AppMeasure.cpp [ 61%] Building CXX object src/Mod/Measure/App/CMakeFiles/Measure.dir/AppMeasurePy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Measure/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMeasure_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Measure/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Measure.dir/AppMeasurePy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Measure/App/AppMeasurePy.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Part2DObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/BodyPyImp.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 61%] Building CXX object src/Mod/Import/App/CMakeFiles/Import.dir/StepShapePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DImport_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Import.dir/StepShapePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/StepShapePyImp.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Assistant.cpp: In member function 'void Gui::Assistant::showDocumentation(const QString&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Assistant.cpp:64:45: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 64 | << page << QLatin1Char('\n') << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Assistant.cpp:32: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Assistant.cpp:64:45: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 64 | << page << QLatin1Char('\n') << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Assistant.cpp:32: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ [ 61%] Building CXX object src/Mod/Surface/App/CMakeFiles/Surface.dir/FeatureCut.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DSurface_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Surface.dir/FeatureCut.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/App/FeatureCut.cpp [ 61%] Building CXX object src/Mod/Path/App/CMakeFiles/Path.dir/Path.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPath_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -fext-numeric-literals -pthread -fPIC -o CMakeFiles/Path.dir/Path.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Path.cpp [ 61%] Building CXX object src/Mod/Path/App/CMakeFiles/Path.dir/Tooltable.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPath_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -fext-numeric-literals -pthread -fPIC -o CMakeFiles/Path.dir/Tooltable.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Tooltable.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/StepShapePyImp.cpp:8: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App/StepShapePy.cpp:78:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 78 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App/StepShapePy.cpp:78:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 61%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/NetworkRetriever.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/NetworkRetriever.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/BodyPyImp.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App/BodyPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App/BodyPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 61%] Building CXX object src/Mod/Import/App/CMakeFiles/Import.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DImport_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Import.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/PreCompiled.cpp [ 61%] Building CXX object src/Mod/Import/App/CMakeFiles/Import.dir/ImpExpDxf.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DImport_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Import.dir/ImpExpDxf.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/ImpExpDxf.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Measure/App/Measurement.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Measure/App/AppMeasure.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 61%] Building CXX object src/Mod/PartDesign/App/CMakeFiles/PartDesign.dir/FeaturePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesign_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesign.dir/FeaturePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeaturePyImp.cpp [ 61%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemMeshShapeNetgenObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemMeshShapeNetgenObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemMeshShapeNetgenObject.cpp [ 61%] Building CXX object src/Mod/Import/App/CMakeFiles/Import.dir/dxf.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DImport_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Import.dir/dxf.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/dxf.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.h:51:62: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 51 | void setProxy( const QString&, const QString& = QString::null, const QString& = QString::null ); | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:27: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.h:51:62: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 51 | void setProxy( const QString&, const QString& = QString::null, const QString& = QString::null ); | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:27: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.h:51:94: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 51 | void setProxy( const QString&, const QString& = QString::null, const QString& = QString::null ); | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:27: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.h:51:94: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 51 | void setProxy( const QString&, const QString& = QString::null, const QString& = QString::null ); | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:27: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ [ 61%] Building CXX object src/Mod/Path/App/CMakeFiles/Path.dir/PropertyPath.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPath_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -fext-numeric-literals -pthread -fPIC -o CMakeFiles/Path.dir/PropertyPath.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/PropertyPath.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 61%] Building CXX object src/Mod/Measure/App/CMakeFiles/Measure.dir/Measurement.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Measure/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMeasure_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Measure/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Measure.dir/Measurement.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Measure/App/Measurement.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/App/FeatureCut.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/App/FeatureCut.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp: In static member function 'static bool Gui::NetworkRetriever::testWget()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:377:43: warning: 'void QProcess::start(const QString&, QIODevice::OpenMode)' is deprecated: Use QProcess::start(const QString &program, const QStringList &arguments,OpenMode mode = ReadWrite) instead [-Wdeprecated-declarations] 377 | proc.start(QString::fromLatin1("wget")); | ^ In file included from /usr/include/qt5/QtCore/QProcess:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:35: /usr/include/qt5/QtCore/qprocess.h:168:10: note: declared here 168 | void start(const QString &command, OpenMode mode = ReadWrite); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp: In member function 'virtual void Gui::StdCmdDownloadOnlineHelp::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:463:41: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 463 | QString username = QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:27: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:463:41: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 463 | QString username = QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:27: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:464:41: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 464 | QString password = QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:27: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:464:41: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 464 | QString password = QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NetworkRetriever.cpp:27: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ [ 61%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/OnlineDocumentation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/OnlineDocumentation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/OnlineDocumentation.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/Feature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeaturePyImp.cpp:26: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/PropertyPath.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemMesh.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemMeshShapeNetgenObject.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemMeshShapeNetgenObject.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/ImpExpDxf.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/App/ImpExpDxf.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeaturePyImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App/FeaturePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App/FeaturePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 62%] Linking CXX shared library ../../../../Mod/Surface/Surface.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/Surface.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,Surface.so -o ../../../../Mod/Surface/Surface.so CMakeFiles/Surface.dir/AppSurface.cpp.o CMakeFiles/Surface.dir/PreCompiled.cpp.o CMakeFiles/Surface.dir/FeatureExtend.cpp.o CMakeFiles/Surface.dir/FeatureGeomFillSurface.cpp.o CMakeFiles/Surface.dir/FeatureFilling.cpp.o CMakeFiles/Surface.dir/FeatureSewing.cpp.o CMakeFiles/Surface.dir/FeatureCut.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Part/Part.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so /usr/lib64/libfreetype.so gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 62%] Built target Surface [ 62%] Building CXX object src/Mod/Measure/App/CMakeFiles/Measure.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Measure/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMeasure_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Measure/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Measure.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Measure/App/PreCompiled.cpp [ 62%] Building CXX object src/Mod/Path/App/CMakeFiles/Path.dir/FeaturePath.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPath_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -fext-numeric-literals -pthread -fPIC -o CMakeFiles/Path.dir/FeaturePath.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/FeaturePath.cpp [ 62%] Building CXX object src/Mod/Measure/App/CMakeFiles/Measure.dir/MeasurementPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Measure/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMeasure_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Measure/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Measure.dir/MeasurementPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Measure/App/MeasurementPyImp.cpp [ 62%] Linking CXX shared library ../../../../Mod/PartDesign/_PartDesign.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/PartDesign.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,_PartDesign.so -o ../../../../Mod/PartDesign/_PartDesign.so CMakeFiles/PartDesign.dir/Feature.cpp.o CMakeFiles/PartDesign.dir/FeatureSolid.cpp.o CMakeFiles/PartDesign.dir/Body.cpp.o CMakeFiles/PartDesign.dir/FeatureBase.cpp.o CMakeFiles/PartDesign.dir/ShapeBinder.cpp.o CMakeFiles/PartDesign.dir/DatumPlane.cpp.o CMakeFiles/PartDesign.dir/DatumLine.cpp.o CMakeFiles/PartDesign.dir/DatumPoint.cpp.o CMakeFiles/PartDesign.dir/DatumCS.cpp.o CMakeFiles/PartDesign.dir/FeatureTransformed.cpp.o CMakeFiles/PartDesign.dir/FeatureMirrored.cpp.o CMakeFiles/PartDesign.dir/FeatureLinearPattern.cpp.o CMakeFiles/PartDesign.dir/FeaturePolarPattern.cpp.o CMakeFiles/PartDesign.dir/FeatureScaled.cpp.o CMakeFiles/PartDesign.dir/FeatureMultiTransform.cpp.o CMakeFiles/PartDesign.dir/FeatureSketchBased.cpp.o CMakeFiles/PartDesign.dir/FeaturePad.cpp.o CMakeFiles/PartDesign.dir/FeaturePocket.cpp.o CMakeFiles/PartDesign.dir/FeatureRevolution.cpp.o CMakeFiles/PartDesign.dir/FeatureGroove.cpp.o CMakeFiles/PartDesign.dir/FeatureAddSub.cpp.o CMakeFiles/PartDesign.dir/FeatureHole.cpp.o CMakeFiles/PartDesign.dir/FeatureBoolean.cpp.o CMakeFiles/PartDesign.dir/FeaturePrimitive.cpp.o CMakeFiles/PartDesign.dir/FeaturePipe.cpp.o CMakeFiles/PartDesign.dir/FeatureLoft.cpp.o CMakeFiles/PartDesign.dir/FeatureDressUp.cpp.o CMakeFiles/PartDesign.dir/FeatureFillet.cpp.o CMakeFiles/PartDesign.dir/FeatureChamfer.cpp.o CMakeFiles/PartDesign.dir/FeatureDraft.cpp.o CMakeFiles/PartDesign.dir/FeatureThickness.cpp.o CMakeFiles/PartDesign.dir/AppPartDesign.cpp.o CMakeFiles/PartDesign.dir/AppPartDesignPy.cpp.o CMakeFiles/PartDesign.dir/PreCompiled.cpp.o CMakeFiles/PartDesign.dir/BodyPyImp.cpp.o CMakeFiles/PartDesign.dir/FeaturePyImp.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Part/Part.so ../../../../lib/libFreeCADApp.so /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so -lpthread /usr/lib64/libz.so -lutil -ldl /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libfreetype.so In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Measure/App/Measurement.cpp:50: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 62%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemAnalysis.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemAnalysis.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemAnalysis.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 62%] Built target PartDesign [ 62%] Building CXX object src/Mod/Path/App/CMakeFiles/Path.dir/PropertyTool.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPath_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -fext-numeric-literals -pthread -fPIC -o CMakeFiles/Path.dir/PropertyTool.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/PropertyTool.cpp [ 62%] Building CXX object src/Mod/Path/App/CMakeFiles/Path.dir/PropertyTooltable.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPath_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -fext-numeric-literals -pthread -fPIC -o CMakeFiles/Path.dir/PropertyTooltable.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/PropertyTooltable.cpp [ 62%] Linking CXX shared library ../../../../Mod/Import/Import.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/Import.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,Import.so -o ../../../../Mod/Import/Import.so CMakeFiles/Import.dir/AppImport.cpp.o CMakeFiles/Import.dir/AppImportPy.cpp.o CMakeFiles/Import.dir/ExportOCAF.cpp.o CMakeFiles/Import.dir/ImportOCAF.cpp.o CMakeFiles/Import.dir/StepShape.cpp.o CMakeFiles/Import.dir/StepShapePyImp.cpp.o CMakeFiles/Import.dir/PreCompiled.cpp.o CMakeFiles/Import.dir/ImpExpDxf.cpp.o CMakeFiles/Import.dir/dxf.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Part/Part.so /usr/lib64/libTKXDESTEP.so.7.4.1 /usr/lib64/libTKXDEIGES.so.7.4.1 /usr/lib64/libTKMeshVS.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXCAF.so.7.4.1 /usr/lib64/libTKVCAF.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKV3d.so.7.4.1 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKService.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ -ldl -lfontconfig /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so -lGL -lX11 -lXext -lXmu -lXi /usr/lib64/libfreetype.so /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/OnlineDocumentation.cpp: In member function 'QByteArray Gui::PythonOnlineHelp::fileNotFound() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/OnlineDocumentation.cpp:259:34: warning: 'QByteArray& QByteArray::append(const QString&)' is deprecated: Use QString's toUtf8(), toLatin1() or toLocal8Bit() [-Wdeprecated-declarations] 259 | res.append(httpResponseHeader); | ^ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/OnlineDocumentation.cpp:26: /usr/include/qt5/QtCore/qstring.h:1507:20: note: declared here 1507 | inline QByteArray &QByteArray::append(const QString &s) | ^~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/OnlineDocumentation.cpp: In member function 'QByteArray Gui::PythonOnlineHelp::loadFailed(const QString&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/OnlineDocumentation.cpp:289:34: warning: 'QByteArray& QByteArray::append(const QString&)' is deprecated: Use QString's toUtf8(), toLatin1() or toLocal8Bit() [-Wdeprecated-declarations] 289 | res.append(httpResponseHeader); | ^ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/OnlineDocumentation.cpp:26: /usr/include/qt5/QtCore/qstring.h:1507:20: note: declared here 1507 | inline QByteArray &QByteArray::append(const QString &s) | ^~~~~~~~~~ [ 62%] Building CXX object src/Mod/Path/App/CMakeFiles/Path.dir/FeaturePathCompound.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPath_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -fext-numeric-literals -pthread -fPIC -o CMakeFiles/Path.dir/FeaturePathCompound.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/FeaturePathCompound.cpp [ 62%] Building CXX object src/Mod/Path/App/CMakeFiles/Path.dir/FeaturePathShape.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPath_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -fext-numeric-literals -pthread -fPIC -o CMakeFiles/Path.dir/FeaturePathShape.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/FeaturePathShape.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 62%] Built target Import [ 62%] Building CXX object src/Mod/Path/App/CMakeFiles/Path.dir/Area.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPath_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -fext-numeric-literals -pthread -fPIC -o CMakeFiles/Path.dir/Area.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/WhatsThis.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/WhatsThis.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WhatsThis.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Measure/App/Measurement.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Measure/App/MeasurementPyImp.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/FeaturePath.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/FeaturePath.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 62%] Building CXX object src/Mod/Path/App/CMakeFiles/Path.dir/FeatureArea.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPath_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -fext-numeric-literals -pthread -fPIC -o CMakeFiles/Path.dir/FeatureArea.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/FeatureArea.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectGroup.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemAnalysis.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemAnalysis.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Measure/App/MeasurementPyImp.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Measure/App/MeasurementPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Measure/App/MeasurementPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:117, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemAnalysis.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl: In instantiation of 'PyTypeObject App::FeaturePythonPyT::Type': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:99:68: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 29 | PyTypeObject FeaturePythonPyT::Type = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/FeaturePathShape.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/FeaturePathShape.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Inventor/SoDrawingGrid.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Inventor/SoDrawingGrid.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Inventor/SoDrawingGrid.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/FeaturePathCompound.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/FeaturePathCompound.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Inventor/SoAutoZoomTranslation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Inventor/SoAutoZoomTranslation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Inventor/SoAutoZoomTranslation.cpp [ 62%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemMesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemMesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemMesh.cpp [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Inventor/MarkerBitmaps.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Inventor/MarkerBitmaps.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Inventor/MarkerBitmaps.cpp [ 62%] Building CXX object src/Mod/Path/App/CMakeFiles/Path.dir/AppPath.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPath_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -fext-numeric-literals -pthread -fPIC -o CMakeFiles/Path.dir/AppPath.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/AppPath.cpp [ 62%] Linking CXX shared library ../../../../Mod/Measure/Measure.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Measure/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/Measure.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,Measure.so -o ../../../../Mod/Measure/Measure.so CMakeFiles/Measure.dir/AppMeasure.cpp.o CMakeFiles/Measure.dir/AppMeasurePy.cpp.o CMakeFiles/Measure.dir/Measurement.cpp.o CMakeFiles/Measure.dir/PreCompiled.cpp.o CMakeFiles/Measure.dir/MeasurementPyImp.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Part/Part.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so /usr/lib64/libfreetype.so [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Inventor/SmSwitchboard.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Inventor/SmSwitchboard.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Inventor/SmSwitchboard.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/FeatureArea.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/FeatureArea.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SoFCBackgroundGradient.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SoFCBackgroundGradient.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCBackgroundGradient.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 62%] Built target Measure [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SoFCBoundingBox.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SoFCBoundingBox.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCBoundingBox.cpp [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SoFCColorBar.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SoFCColorBar.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorBar.cpp [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SoFCColorGradient.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SoFCColorGradient.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorGradient.cpp [ 62%] Building CXX object src/Mod/Path/App/CMakeFiles/Path.dir/AppPathPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPath_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -fext-numeric-literals -pthread -fPIC -o CMakeFiles/Path.dir/AppPathPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/AppPathPy.cpp [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SoFCColorLegend.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SoFCColorLegend.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorLegend.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorBar.cpp: In member function 'virtual void Gui::SoFCColorBar::handleEvent(SoHandleEventAction*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorBar.cpp:257:36: warning: 'int QTime::restart()' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 257 | if (_timer.restart() < QApplication::doubleClickInterval()) { | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorBar.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorBar.cpp:34: /usr/include/qt5/QtCore/qdatetime.h:236:54: note: declared here 236 | QT_DEPRECATED_X("Use QElapsedTimer instead") int restart(); | ^~~~~~~ [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SoFCDB.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SoFCDB.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCDB.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemMesh.cpp:46: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SoFCInteractiveElement.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SoFCInteractiveElement.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCInteractiveElement.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/FeaturePath.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/AppPath.cpp:41: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SoFCOffscreenRenderer.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SoFCOffscreenRenderer.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCOffscreenRenderer.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorGradient.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgSettingsColorGradientImp.h:44:76: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 44 | DlgSettingsColorGradientImp( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/qdatetime.h:44, from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorBar.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorGradient.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorGradient.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/AppPathPy.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/math/tools/cxx03_warn.hpp:9, from /usr/include/boost/math/constants/constants.hpp:11, from /usr/include/boost/geometry/util/math.hpp:30, from /usr/include/boost/geometry/core/radian_access.hpp:33, from /usr/include/boost/geometry/geometry.hpp:51, from /usr/include/boost/geometry.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SoFCSelection.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SoFCSelection.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelection.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, double, double, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:441:83: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 441 | inline CLine(const Point& p0, double dx, double dy, bool normalise = true){ p = p0; v = Vector2d(dx, dy); if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Vector2d&, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:442:81: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 442 | inline CLine(const Point& p0, const Vector2d& v0, bool normalise = true) {p = p0; v = v0; if(normalise) Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::CLine&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:443:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 443 | inline CLine( const CLine& s ) {p = s.p; v = s.v;}; // copy constructor CLine s1(s2); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h: In constructor 'geoff_geometry::CLine::CLine(const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:444:55: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 444 | inline CLine(const Point& p0, const Point& p1) {p = p0; v = Vector2d(p0, p1); Normalise();}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h: In copy constructor 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:483:37: warning: implicitly-declared 'constexpr geoff_geometry::Circle& geoff_geometry::Circle::operator=(const geoff_geometry::Circle&)' is deprecated [-Wdeprecated-copy] 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:483:3: note: because 'geoff_geometry::Circle' has user-provided 'geoff_geometry::Circle::Circle(const geoff_geometry::Circle&)' 483 | Circle( const Circle& c ){*this = c;} // copy constructor Circle c1(c2); | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box::Box(geoff_geometry::Point&, geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:509:41: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:509:53: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 509 | Box(Point& pmin, Point& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h: In constructor 'geoff_geometry::Box3d::Box3d(const geoff_geometry::Point3d&, const geoff_geometry::Point3d&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:523:59: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:523:71: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 523 | Box3d(const Point3d& pmin, const Point3d& pmax) { min = pmin; max = pmax; ok = true;}; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h: In constructor 'geoff_geometry::Span::Span(int, const geoff_geometry::Point&, const geoff_geometry::Point&, const geoff_geometry::Point&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:594:93: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:594:102: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:594:111: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 594 | Span(int spandir, const Point& pn, const Point& pf, const Point& c) { dir = spandir; p0 = pn, p1 = pf, pc = c; ID = 0; SetProperties(true); ok = p0.ok;}; | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h: In member function 'int geoff_geometry::Kurve::Get(int, geoff_geometry::Point3d&, geoff_geometry::Point3d&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:836:68: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:836:78: warning: implicitly-declared 'constexpr geoff_geometry::Point3d& geoff_geometry::Point3d::operator=(const geoff_geometry::Point3d&)' is deprecated [-Wdeprecated-copy] 836 | { Point p2d, pc2d; int d = Get(spanVertexNumber, p2d, pc2d); p = p2d; pc = pc2d; return d;} | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:260:10: note: because 'geoff_geometry::Point3d' has user-provided 'geoff_geometry::Point3d::Point3d(const geoff_geometry::Point3d&)' 260 | inline Point3d( const Point3d& p ) { // copy constructor Point p1(p2); | ^~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h: In member function 'void Point::Transform(const geoff_geometry::Matrix&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:69:20: warning: implicitly-declared 'constexpr geoff_geometry::Point& geoff_geometry::Point::operator=(const geoff_geometry::Point&)' is deprecated [-Wdeprecated-copy] 69 | p = p.Transform(m); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Point.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Curve.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/Area.h:9, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/Area.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/../libarea/kurve/geometry.h:216:10: note: because 'geoff_geometry::Point' has user-provided 'geoff_geometry::Point::Point(const geoff_geometry::Point&)' 216 | inline Point( const Point& p ) { // copy constructor Point p1(p2); | ^~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorGradient.cpp:41: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 62%] Building CXX object src/Mod/Path/App/CMakeFiles/Path.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPath_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -fext-numeric-literals -pthread -fPIC -o CMakeFiles/Path.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/PreCompiled.cpp [ 62%] Building CXX object src/Mod/Path/App/CMakeFiles/Path.dir/CommandPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPath_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -fext-numeric-literals -pthread -fPIC -o CMakeFiles/Path.dir/CommandPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/CommandPyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorGradient.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/qdatetime.h:44, from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorBar.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorGradient.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorGradient.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorGradient.cpp: In member function 'virtual bool Gui::SoFCColorGradient::customize()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorGradient.cpp:324:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 324 | Gui::Dialog::DlgSettingsColorGradientImp dlg(parent); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/qdatetime.h:44, from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorBar.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorGradient.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorGradient.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCDB.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/qdatetime.h:44, from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorBar.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCDB.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCDB.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/qdatetime.h:44, from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorBar.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCDB.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCDB.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/qdatetime.h:44, from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorBar.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCDB.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCDB.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/qdatetime.h:44, from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorBar.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCDB.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCDB.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/qdatetime.h:44, from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorBar.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCDB.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCDB.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/qdatetime.h:44, from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorBar.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCDB.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCOffscreenRenderer.cpp: In member function 'void Gui::SoQtOffscreenRenderer::init(const SbViewportRegion&, SoGLRenderAction*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCOffscreenRenderer.cpp:412:22: warning: implicitly-declared 'constexpr SbViewportRegion& SbViewportRegion::operator=(const SbViewportRegion&)' is deprecated [-Wdeprecated-copy] 412 | this->viewport = vpr; | ^~~ In file included from /usr/include/Coin4/Inventor/actions/SoGLRenderAction.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCOffscreenRenderer.cpp:25: /usr/include/Coin4/Inventor/SbViewportRegion.h:45:3: note: because 'SbViewportRegion' has user-provided 'SbViewportRegion::SbViewportRegion(const SbViewportRegion&)' 45 | SbViewportRegion(const SbViewportRegion & vpReg); | ^~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCOffscreenRenderer.cpp: In member function 'void Gui::SoQtOffscreenRenderer::setViewportRegion(const SbViewportRegion&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCOffscreenRenderer.cpp:467:31: warning: implicitly-declared 'constexpr SbViewportRegion& SbViewportRegion::operator=(const SbViewportRegion&)' is deprecated [-Wdeprecated-copy] 467 | PRIVATE(this)->viewport = region; | ^~~~~~ In file included from /usr/include/Coin4/Inventor/actions/SoGLRenderAction.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCOffscreenRenderer.cpp:25: /usr/include/Coin4/Inventor/SbViewportRegion.h:45:3: note: because 'SbViewportRegion' has user-provided 'SbViewportRegion::SbViewportRegion(const SbViewportRegion&)' 45 | SbViewportRegion(const SbViewportRegion & vpReg); | ^~~~~~~~~~~~~~~~ [ 62%] Building CXX object src/Mod/Path/App/CMakeFiles/Path.dir/PathPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPath_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -fext-numeric-literals -pthread -fPIC -o CMakeFiles/Path.dir/PathPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/PathPyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/CommandPyImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/CommandPy.cpp:79:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 79 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/CommandPy.cpp:79:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/PathPyImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/PathPy.cpp:77:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 77 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/PathPy.cpp:77:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCDB.cpp:45: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 62%] Building CXX object src/Mod/Path/App/CMakeFiles/Path.dir/TooltablePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPath_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -fext-numeric-literals -pthread -fPIC -o CMakeFiles/Path.dir/TooltablePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/TooltablePyImp.cpp [ 62%] Building CXX object src/Mod/Path/App/CMakeFiles/Path.dir/FeaturePathCompoundPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPath_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -fext-numeric-literals -pthread -fPIC -o CMakeFiles/Path.dir/FeaturePathCompoundPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/FeaturePathCompoundPyImp.cpp [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SoFCUnifiedSelection.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SoFCUnifiedSelection.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCDB.cpp:60: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/qdatetime.h:44, from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorBar.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCDB.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCDB.cpp:60: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/qdatetime.h:44, from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCColorBar.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCDB.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 62%] Building CXX object src/Mod/Path/App/CMakeFiles/Path.dir/AreaPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPath_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -fext-numeric-literals -pthread -fPIC -o CMakeFiles/Path.dir/AreaPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/AreaPyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/TooltablePyImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/ToolPy.cpp:86:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 86 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/ToolPy.cpp:86:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/TooltablePyImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/TooltablePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/TooltablePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SoFCSelectionAction.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SoFCSelectionAction.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelectionAction.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelection.cpp:48: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 62%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemResultObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemResultObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemResultObject.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelection.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qstatusbar.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelection.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelection.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qstatusbar.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelection.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelection.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qstatusbar.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelection.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelection.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qstatusbar.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelection.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelection.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qstatusbar.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelection.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelection.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qstatusbar.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelection.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelection.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qstatusbar.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelection.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelection.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qstatusbar.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelection.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /usr/bin/gmake -f src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/build.make src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/depend.internal". In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/AreaPyImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/AreaPy.cpp:79:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 79 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/AreaPy.cpp:79:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] Scanning dependencies of target TechDraw gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/build.make src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 62%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/AppTechDraw.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/AppTechDraw.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/AppTechDraw.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/FeaturePathCompound.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/FeaturePathCompoundPyImp.cpp:26: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/FeaturePathCompoundPyImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/FeaturePathCompoundPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/FeaturePathCompoundPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelectionAction.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelectionAction.cpp:57: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelectionAction.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelectionAction.cpp:57: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelectionAction.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelectionAction.cpp:57: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/Coin4/Inventor/elements/SoTextureMatrixElement.h:40, from /usr/include/Coin4/Inventor/elements/SoElements.h:46, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.cpp:45: /usr/include/Coin4/Inventor/elements/SoMultiTextureMatrixElement.h: In copy constructor 'SoMultiTextureMatrixElement::UnitData::UnitData(const SoMultiTextureMatrixElement::UnitData&)': /usr/include/Coin4/Inventor/elements/SoMultiTextureMatrixElement.h:64:69: warning: implicitly-declared 'constexpr SbMatrix::SbMatrix(const SbMatrix&)' is deprecated [-Wdeprecated-copy] 64 | UnitData(const UnitData & org) : textureMatrix(org.textureMatrix) {} | ^ In file included from /usr/include/Coin4/Inventor/elements/SoLightElement.h:39, from /usr/include/Coin4/Inventor/elements/SoElements.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.cpp:45: /usr/include/Coin4/Inventor/SbMatrix.h:113:14: note: because 'SbMatrix' has user-provided 'SbMatrix& SbMatrix::operator=(const SbMatrix&)' 113 | SbMatrix & operator =(const SbMatrix & m); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelectionAction.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelectionAction.cpp:57: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelectionAction.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelectionAction.cpp:57: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelectionAction.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelectionAction.cpp:57: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 62%] Building CXX object src/Mod/Path/App/CMakeFiles/Path.dir/FeatureAreaPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPath_EXPORTS -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -fext-numeric-literals -pthread -fPIC -o CMakeFiles/Path.dir/FeatureAreaPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/FeatureAreaPyImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemResultObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemResultObject.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SoFCVectorizeSVGAction.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SoFCVectorizeSVGAction.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCVectorizeSVGAction.cpp [ 62%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/AppTechDrawPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/AppTechDrawPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/AppTechDrawPy.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:117, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemResultObject.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl: In instantiation of 'PyTypeObject App::FeaturePythonPyT::Type': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:99:68: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 29 | PyTypeObject FeaturePythonPyT::Type = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelectionAction.cpp:57: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SoFCVectorizeU3DAction.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SoFCVectorizeU3DAction.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCVectorizeU3DAction.cpp In file included from /usr/include/Coin4/Inventor/elements/SoTextureMatrixElement.h:40, from /usr/include/Coin4/Inventor/elements/SoElements.h:46, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelectionAction.cpp:65: /usr/include/Coin4/Inventor/elements/SoMultiTextureMatrixElement.h: In copy constructor 'SoMultiTextureMatrixElement::UnitData::UnitData(const SoMultiTextureMatrixElement::UnitData&)': /usr/include/Coin4/Inventor/elements/SoMultiTextureMatrixElement.h:64:69: warning: implicitly-declared 'constexpr SbMatrix::SbMatrix(const SbMatrix&)' is deprecated [-Wdeprecated-copy] 64 | UnitData(const UnitData & org) : textureMatrix(org.textureMatrix) {} | ^ In file included from /usr/include/Coin4/Inventor/SbXfBox3f.h:38, from /usr/include/Coin4/Inventor/actions/SoGetBoundingBoxAction.h:41, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelectionAction.cpp:30: /usr/include/Coin4/Inventor/SbMatrix.h:113:14: note: because 'SbMatrix' has user-provided 'SbMatrix& SbMatrix::operator=(const SbMatrix&)' 113 | SbMatrix & operator =(const SbMatrix & m); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelectionAction.cpp: In member function 'void Gui::SoBoxSelectionRenderActionP::updateBbox(const SoPath*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelectionAction.cpp:1092:47: warning: implicitly-declared 'constexpr SbMatrix::SbMatrix(const SbMatrix&)' is deprecated [-Wdeprecated-copy] 1092 | SbMatrix transform = box.getTransform(); | ^ In file included from /usr/include/Coin4/Inventor/SbXfBox3f.h:38, from /usr/include/Coin4/Inventor/actions/SoGetBoundingBoxAction.h:41, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCSelectionAction.cpp:30: /usr/include/Coin4/Inventor/SbMatrix.h:113:14: note: because 'SbMatrix' has user-provided 'SbMatrix& SbMatrix::operator=(const SbMatrix&)' 113 | SbMatrix & operator =(const SbMatrix & m); | ^~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawPage.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/AppTechDraw.cpp:21: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.cpp:79: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 62%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemSolverObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemSolverObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemSolverObject.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.cpp:81: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qstatusbar.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.cpp:84: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qstatusbar.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.cpp:84: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qstatusbar.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.cpp:84: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qstatusbar.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.cpp:84: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qstatusbar.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.cpp:84: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qstatusbar.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.cpp:84: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qstatusbar.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SoNavigationDragger.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SoNavigationDragger.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoNavigationDragger.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/FeatureArea.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/FeatureAreaPyImp.cpp:27: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoNavigationDragger.cpp: In static member function 'static void RotTransDragger::valueChangedCB(void*, SoDragger*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoNavigationDragger.cpp:342:46: warning: implicitly-declared 'constexpr SbMatrix::SbMatrix(const SbMatrix&)' is deprecated [-Wdeprecated-copy] 342 | SbMatrix motMat = myself->getMotionMatrix(); | ^ In file included from /usr/include/Coin4/Inventor/nodes/SoAntiSquish.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoNavigationDragger.cpp:25: /usr/include/Coin4/Inventor/SbMatrix.h:113:14: note: because 'SbMatrix' has user-provided 'SbMatrix& SbMatrix::operator=(const SbMatrix&)' 113 | SbMatrix & operator =(const SbMatrix & m); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoNavigationDragger.cpp: In static member function 'static void RotTransDragger::fieldSensorCB(void*, SoSensor*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoNavigationDragger.cpp:365:46: warning: implicitly-declared 'constexpr SbMatrix::SbMatrix(const SbMatrix&)' is deprecated [-Wdeprecated-copy] 365 | SbMatrix motMat = myself->getMotionMatrix(); | ^ In file included from /usr/include/Coin4/Inventor/nodes/SoAntiSquish.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoNavigationDragger.cpp:25: /usr/include/Coin4/Inventor/SbMatrix.h:113:14: note: because 'SbMatrix' has user-provided 'SbMatrix& SbMatrix::operator=(const SbMatrix&)' 113 | SbMatrix & operator =(const SbMatrix & m); | ^~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/AppTechDrawPy.cpp:48: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SoAxisCrossKit.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SoAxisCrossKit.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoAxisCrossKit.cpp [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SoTextLabel.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SoTextLabel.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoTextLabel.cpp [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SoTouchEvents.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SoTouchEvents.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoTouchEvents.cpp [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SoFCCSysDragger.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SoFCCSysDragger.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp [ 62%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawUtil.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawUtil.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawUtil.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/App/FeatureAreaPyImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/FeatureAreaPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App/FeatureAreaPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Language/Translator.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Language/Translator.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Language/Translator.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemSolverObject.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemSolverObject.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoTextLabel.cpp: In member function 'void Gui::SoFrameLabel::drawImage()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoTextLabel.cpp:455:43: warning: 'int QFontMetrics::width(const QString&, int) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 455 | w = std::max(w, fm.width(line)); | ^ In file included from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoTextLabel.cpp:37: /usr/include/qt5/QtGui/qfontmetrics.h:106:9: note: declared here 106 | int width(const QString &, int len = -1) const; | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp: In static member function 'static void Gui::TDragger::fieldSensorCB(void*, SoSensor*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp:220:47: warning: implicitly-declared 'constexpr SbMatrix::SbMatrix(const SbMatrix&)' is deprecated [-Wdeprecated-copy] 220 | SbMatrix matrix = sudoThis->getMotionMatrix(); | ^ In file included from /usr/include/Coin4/Inventor/nodes/SoShape.h:38, from /usr/include/Coin4/Inventor/nodes/SoCone.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp:32: /usr/include/Coin4/Inventor/SbMatrix.h:113:14: note: because 'SbMatrix' has user-provided 'SbMatrix& SbMatrix::operator=(const SbMatrix&)' 113 | SbMatrix & operator =(const SbMatrix & m); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp: In static member function 'static void Gui::TDragger::valueChangedCB(void*, SoDragger*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp:229:49: warning: implicitly-declared 'constexpr SbMatrix::SbMatrix(const SbMatrix&)' is deprecated [-Wdeprecated-copy] 229 | SbMatrix matrix = sudoThis->getMotionMatrix(); | ^ In file included from /usr/include/Coin4/Inventor/nodes/SoShape.h:38, from /usr/include/Coin4/Inventor/nodes/SoCone.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp:32: /usr/include/Coin4/Inventor/SbMatrix.h:113:14: note: because 'SbMatrix' has user-provided 'SbMatrix& SbMatrix::operator=(const SbMatrix&)' 113 | SbMatrix & operator =(const SbMatrix & m); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp: In static member function 'static void Gui::RDragger::fieldSensorCB(void*, SoSensor*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp:492:47: warning: implicitly-declared 'constexpr SbMatrix::SbMatrix(const SbMatrix&)' is deprecated [-Wdeprecated-copy] 492 | SbMatrix matrix = sudoThis->getMotionMatrix(); | ^ In file included from /usr/include/Coin4/Inventor/nodes/SoShape.h:38, from /usr/include/Coin4/Inventor/nodes/SoCone.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp:32: /usr/include/Coin4/Inventor/SbMatrix.h:113:14: note: because 'SbMatrix' has user-provided 'SbMatrix& SbMatrix::operator=(const SbMatrix&)' 113 | SbMatrix & operator =(const SbMatrix & m); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp: In static member function 'static void Gui::RDragger::valueChangedCB(void*, SoDragger*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp:501:49: warning: implicitly-declared 'constexpr SbMatrix::SbMatrix(const SbMatrix&)' is deprecated [-Wdeprecated-copy] 501 | SbMatrix matrix = sudoThis->getMotionMatrix(); | ^ In file included from /usr/include/Coin4/Inventor/nodes/SoShape.h:38, from /usr/include/Coin4/Inventor/nodes/SoCone.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp:32: /usr/include/Coin4/Inventor/SbMatrix.h:113:14: note: because 'SbMatrix' has user-provided 'SbMatrix& SbMatrix::operator=(const SbMatrix&)' 113 | SbMatrix & operator =(const SbMatrix & m); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp: In static member function 'static void Gui::SoFCCSysDragger::translationSensorCB(void*, SoSensor*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp:872:49: warning: implicitly-declared 'constexpr SbMatrix::SbMatrix(const SbMatrix&)' is deprecated [-Wdeprecated-copy] 872 | SbMatrix matrix = sudoThis->getMotionMatrix(); | ^ In file included from /usr/include/Coin4/Inventor/nodes/SoShape.h:38, from /usr/include/Coin4/Inventor/nodes/SoCone.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp:32: /usr/include/Coin4/Inventor/SbMatrix.h:113:14: note: because 'SbMatrix' has user-provided 'SbMatrix& SbMatrix::operator=(const SbMatrix&)' 113 | SbMatrix & operator =(const SbMatrix & m); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp: In static member function 'static void Gui::SoFCCSysDragger::rotationSensorCB(void*, SoSensor*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp:881:49: warning: implicitly-declared 'constexpr SbMatrix::SbMatrix(const SbMatrix&)' is deprecated [-Wdeprecated-copy] 881 | SbMatrix matrix = sudoThis->getMotionMatrix(); | ^ In file included from /usr/include/Coin4/Inventor/nodes/SoShape.h:38, from /usr/include/Coin4/Inventor/nodes/SoCone.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp:32: /usr/include/Coin4/Inventor/SbMatrix.h:113:14: note: because 'SbMatrix' has user-provided 'SbMatrix& SbMatrix::operator=(const SbMatrix&)' 113 | SbMatrix & operator =(const SbMatrix & m); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp: In static member function 'static void Gui::SoFCCSysDragger::valueChangedCB(void*, SoDragger*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp:890:49: warning: implicitly-declared 'constexpr SbMatrix::SbMatrix(const SbMatrix&)' is deprecated [-Wdeprecated-copy] 890 | SbMatrix matrix = sudoThis->getMotionMatrix(); | ^ In file included from /usr/include/Coin4/Inventor/nodes/SoShape.h:38, from /usr/include/Coin4/Inventor/nodes/SoCone.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCCSysDragger.cpp:32: /usr/include/Coin4/Inventor/SbMatrix.h:113:14: note: because 'SbMatrix' has user-provided 'SbMatrix& SbMatrix::operator=(const SbMatrix&)' 113 | SbMatrix & operator =(const SbMatrix & m); | ^~~~~~~~ [ 62%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemConstraint.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemConstraint.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:117, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemSolverObject.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl: In instantiation of 'PyTypeObject App::FeaturePythonPyT::Type': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:99:68: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 29 | PyTypeObject FeaturePythonPyT::Type = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 62%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemMeshProperty.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemMeshProperty.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemMeshProperty.cpp [ 62%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/propertyeditor/PropertyEditor.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/propertyeditor/PropertyEditor.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyEditor.cpp [ 62%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemConstraintBearing.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemConstraintBearing.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintBearing.cpp [ 62%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemConstraintFixed.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemConstraintFixed.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintFixed.cpp [ 62%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/HatchLine.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/HatchLine.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/HatchLine.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/regex/v4/regex_workaround.hpp:44, from /usr/include/boost/regex/v4/regex.hpp:32, from /usr/include/boost/regex.hpp:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawUtil.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.cpp:54: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 62%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/PreCompiled.cpp [ 62%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/EdgeWalker.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/EdgeWalker.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/EdgeWalker.cpp [ 62%] Linking CXX shared library ../../../../Mod/Path/Path.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/Path.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,Path.so -o ../../../../Mod/Path/Path.so CMakeFiles/Path.dir/Command.cpp.o CMakeFiles/Path.dir/Path.cpp.o CMakeFiles/Path.dir/Tooltable.cpp.o CMakeFiles/Path.dir/PropertyPath.cpp.o CMakeFiles/Path.dir/FeaturePath.cpp.o CMakeFiles/Path.dir/PropertyTool.cpp.o CMakeFiles/Path.dir/PropertyTooltable.cpp.o CMakeFiles/Path.dir/FeaturePathCompound.cpp.o CMakeFiles/Path.dir/FeaturePathShape.cpp.o CMakeFiles/Path.dir/Area.cpp.o CMakeFiles/Path.dir/FeatureArea.cpp.o CMakeFiles/Path.dir/AppPath.cpp.o CMakeFiles/Path.dir/AppPathPy.cpp.o CMakeFiles/Path.dir/PreCompiled.cpp.o CMakeFiles/Path.dir/CommandPyImp.cpp.o CMakeFiles/Path.dir/PathPyImp.cpp.o CMakeFiles/Path.dir/TooltablePyImp.cpp.o CMakeFiles/Path.dir/FeaturePathCompoundPyImp.cpp.o CMakeFiles/Path.dir/AreaPyImp.cpp.o CMakeFiles/Path.dir/FeatureAreaPyImp.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Part/Part.so ../../../../lib/libarea-native.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so /usr/lib64/libfreetype.so -lmpi_cxx -lmpi In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:117, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl: In instantiation of 'PyTypeObject App::FeaturePythonPyT::Type': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.h:99:68: required from here /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 29 | PyTypeObject FeaturePythonPyT::Type = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePythonPyImp.inl:29:14: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 63%] Built target Path /usr/bin/gmake -f src/Mod/Path/PathSimulator/App/CMakeFiles/PathSimulator.dir/build.make src/Mod/Path/PathSimulator/App/CMakeFiles/PathSimulator.dir/depend In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintBearing.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintBearing.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathSimulator/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/PathSimulator/App /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/PathSimulator/App/CMakeFiles/PathSimulator.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/PathSimulator/App/CMakeFiles/PathSimulator.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/PathSimulator/App/CMakeFiles/PathSimulator.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/PathSimulator/App/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/PathSimulator/App/CMakeFiles/PathSimulator.dir/depend.internal". Scanning dependencies of target PathSimulator gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Path/PathSimulator/App/CMakeFiles/PathSimulator.dir/build.make src/Mod/Path/PathSimulator/App/CMakeFiles/PathSimulator.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 63%] Building CXX object src/Mod/Path/PathSimulator/App/CMakeFiles/PathSimulator.dir/AppPathSimulator.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/PathSimulator/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPathSimulator_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/PathSimulator/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PathSimulator.dir/AppPathSimulator.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathSimulator/App/AppPathSimulator.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintFixed.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintFixed.cpp:45: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyEditor.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyEditor.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyEditor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyEditor.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyEditor.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyEditor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawUtil.h:42, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/HatchLine.cpp:43: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 63%] Building CXX object src/Mod/Path/PathSimulator/App/CMakeFiles/PathSimulator.dir/PathSim.cpp.o [ 63%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemConstraintForce.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/PathSimulator/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPathSimulator_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/PathSimulator/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PathSimulator.dir/PathSim.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathSimulator/App/PathSim.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemConstraintForce.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintForce.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawUtil.h:42, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/EdgeWalker.cpp:52: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 63%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemConstraintFluidBoundary.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemConstraintFluidBoundary.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintFluidBoundary.cpp [ 63%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawProjectSplit.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawProjectSplit.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawProjectSplit.cpp [ 63%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/propertyeditor/PropertyItem.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/propertyeditor/PropertyItem.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp [ 63%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemConstraintPressure.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemConstraintPressure.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintPressure.cpp [ 63%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/LineGroup.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/LineGroup.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/LineGroup.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintForce.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintForce.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 63%] Building CXX object src/Mod/Path/PathSimulator/App/CMakeFiles/PathSimulator.dir/VolSim.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/PathSimulator/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPathSimulator_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/PathSimulator/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PathSimulator.dir/VolSim.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathSimulator/App/VolSim.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintFluidBoundary.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintFluidBoundary.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintPressure.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintPressure.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawProjectSplit.cpp:70: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 63%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawPage.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawPage.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawPage.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:40: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 63%] Building CXX object src/Mod/Path/PathSimulator/App/CMakeFiles/PathSimulator.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/PathSimulator/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPathSimulator_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/PathSimulator/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PathSimulator.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathSimulator/App/PreCompiled.cpp [ 63%] Building CXX object src/Mod/Path/PathSimulator/App/CMakeFiles/PathSimulator.dir/PathSimPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/PathSimulator/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPathSimulator_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/PathSimulator/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PathSimulator.dir/PathSimPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathSimulator/App/PathSimPyImp.cpp [ 63%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemConstraintGear.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemConstraintGear.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintGear.cpp [ 63%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemConstraintPulley.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemConstraintPulley.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintPulley.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcombobox.h:43, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 63%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemConstraintDisplacement.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemConstraintDisplacement.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintDisplacement.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:55: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcombobox.h:43, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:55: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcombobox.h:43, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:55: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:84:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | LocationDialog(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcombobox.h:43, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:55: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:55: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:40: /usr/include/boost/bind.hpp: At global scope: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:55: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:49:57: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 49 | Placement(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcombobox.h:43, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:55: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:113:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 113 | DockablePlacement(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcombobox.h:43, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcombobox.h:43, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcombobox.h:43, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcombobox.h:43, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPropertyLink.h:38:88: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 38 | DlgPropertyLink(const QStringList& list, QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcombobox.h:43, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp: In member function 'void Gui::PropertyEditor::LinkLabel::onEditClicked()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:3450:48: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 3450 | Gui::Dialog::DlgPropertyLink dlg(link, this); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcombobox.h:43, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp: In member function 'void Gui::PropertyEditor::LinkListLabel::onEditClicked()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:3613:48: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 3613 | Gui::Dialog::DlgPropertyLink dlg(list, this); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcombobox.h:43, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/PathSimulator/App/PathSimPyImp.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/PathSimulator/App/PathSimPy.cpp:78:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 78 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/PathSimulator/App/PathSimPy.cpp:78:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 63%] Linking CXX shared library ../../../../../Mod/Path/PathSimulator.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/PathSimulator/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/PathSimulator.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,PathSimulator.so -o ../../../../../Mod/Path/PathSimulator.so CMakeFiles/PathSimulator.dir/AppPathSimulator.cpp.o CMakeFiles/PathSimulator.dir/PathSim.cpp.o CMakeFiles/PathSimulator.dir/VolSim.cpp.o CMakeFiles/PathSimulator.dir/PreCompiled.cpp.o CMakeFiles/PathSimulator.dir/PathSimPyImp.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Mesh:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../../Mod/Path/Path.so ../../../../../Mod/Part/Part.so ../../../../../Mod/Mesh/Mesh.so ../../../../../lib/libFreeCADApp.so /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so /usr/lib64/libfreetype.so ../../../../../lib/libarea-native.so /usr/lib64/libQt5Xml.so.5.15.2 ../../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so -lpthread /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Concurrent.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 63%] Built target PathSimulator [ 63%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawView.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawPage.cpp:40: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 63%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawViewPart.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawViewPart.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewPart.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintGear.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintGear.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 63%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawViewAnnotation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawViewAnnotation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewAnnotation.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintPulley.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintPulley.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintDisplacement.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintDisplacement.cpp:39: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 63%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemConstraintTemperature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemConstraintTemperature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintTemperature.cpp [ 63%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemConstraintHeatflux.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemConstraintHeatflux.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintHeatflux.cpp [ 63%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemConstraintInitialTemperature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemConstraintInitialTemperature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintInitialTemperature.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewAnnotation.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawView.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 63%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawViewSymbol.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawViewSymbol.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewSymbol.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewPart.cpp:79: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 63%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawViewSpreadsheet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawViewSpreadsheet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewSpreadsheet.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintTemperature.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintTemperature.cpp:39: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintHeatflux.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintHeatflux.cpp:38: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/regex/v4/regex_workaround.hpp:44, from /usr/include/boost/regex/v4/regex.hpp:32, from /usr/include/boost/regex.hpp:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewSymbol.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintInitialTemperature.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintInitialTemperature.cpp:39: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 64%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/propertyeditor/PropertyItemDelegate.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/propertyeditor/PropertyItemDelegate.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItemDelegate.cpp [ 64%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawViewClip.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawViewClip.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewClip.cpp [ 64%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemConstraintPlaneRotation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemConstraintPlaneRotation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintPlaneRotation.cpp [ 64%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawProjGroup.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawProjGroup.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawProjGroup.cpp [ 64%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemConstraintContact.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemConstraintContact.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintContact.cpp [ 64%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemConstraintTransform.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemConstraintTransform.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintTransform.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewSpreadsheet.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItemDelegate.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItemDelegate.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItemDelegate.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItemDelegate.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewClip.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewClip.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintContact.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintContact.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintPlaneRotation.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintPlaneRotation.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 64%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawProjGroupItem.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawProjGroupItem.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawProjGroupItem.cpp [ 64%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/propertyeditor/PropertyModel.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/propertyeditor/PropertyModel.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyModel.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawProjGroup.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintTransform.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintTransform.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 64%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawParametricTemplate.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawParametricTemplate.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawParametricTemplate.cpp [ 65%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawSVGTemplate.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawSVGTemplate.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawSVGTemplate.cpp [ 65%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/PropertyPostDataObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/PropertyPostDataObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/PropertyPostDataObject.cpp [ 66%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemPostObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemPostObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemPostObject.cpp [ 66%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemPostPipeline.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemPostPipeline.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemPostPipeline.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyModel.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/qabstractitemmodel.h:43, from /usr/include/qt5/QtCore/QAbstractItemModel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyModel.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyModel.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyModel.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/qabstractitemmodel.h:43, from /usr/include/qt5/QtCore/QAbstractItemModel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyModel.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyModel.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawProjGroupItem.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawParametricTemplate.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/TaskView/TaskAppearance.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/TaskView/TaskAppearance.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskAppearance.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemPostObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemPostObject.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/PropertyPostDataObject.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawTemplate.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawTemplate.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawTemplate.cpp [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawViewCollection.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawViewCollection.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewCollection.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemPostObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemPostPipeline.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemPostPipeline.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawSVGTemplate.cpp:39: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawViewDimension.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawViewDimension.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewDimension.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskAppearance.cpp:28: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemPostFilter.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemPostFilter.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemPostFilter.cpp [ 66%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemPostFunction.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemPostFunction.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemPostFunction.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawTemplate.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/TaskView/TaskSelectLinkProperty.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/TaskView/TaskSelectLinkProperty.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskSelectLinkProperty.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskAppearance.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskAppearance.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_TaskAppearance.h:16, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskAppearance.cpp:31: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewCollection.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskSelectLinkProperty.cpp:28: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskAppearance.cpp:28: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawViewSection.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawViewSection.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewSection.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemPostObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemPostFilter.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemPostFilter.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskAppearance.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_TaskAppearance.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskAppearance.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewDimension.cpp:43: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawHatch.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawHatch.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawHatch.cpp [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawGeomHatch.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawGeomHatch.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawGeomHatch.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemPostObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemPostFunction.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemPostFunction.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskSelectLinkProperty.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskSelectLinkProperty.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskSelectLinkProperty.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskSelectLinkProperty.cpp:32: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskSelectLinkProperty.cpp:28: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemVTKTools.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemVTKTools.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemVTKTools.cpp [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/TaskView/TaskEditControl.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/TaskView/TaskEditControl.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskEditControl.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskSelectLinkProperty.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_TaskSelectLinkProperty.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskSelectLinkProperty.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 66%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemSetObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemSetObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemSetObject.cpp [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawViewDraft.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawViewDraft.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewDraft.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewSection.cpp:66: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawGeomHatch.cpp:62: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawHatch.cpp:38: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawViewArch.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawViewArch.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewArch.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewDraft.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewDraft.cpp:37: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemSetObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemSetObject.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawViewMulti.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawViewMulti.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewMulti.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemVTKTools.cpp:48: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskEditControl.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskEditControl.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskEditControl.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskEditControl.cpp:29: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewArch.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewArch.cpp:37: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawViewImage.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawViewImage.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewImage.cpp [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/TaskView/TaskView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/TaskView/TaskView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskEditControl.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskEditControl.cpp:29: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemSetNodesObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemSetNodesObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemSetNodesObject.cpp [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawViewDetail.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawViewDetail.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewDetail.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.cpp:27: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/Geometry.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/Geometry.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/Geometry.cpp [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/TaskView/TaskDialog.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/TaskView/TaskDialog.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.cpp [ 66%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemSetElementsObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemSetElementsObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemSetElementsObject.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewMulti.cpp:52: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.cpp:38: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/regex/v4/regex_workaround.hpp:44, from /usr/include/boost/regex/v4/regex.hpp:32, from /usr/include/boost/regex.hpp:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewImage.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemSetNodesObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemSetNodesObject.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.cpp:27: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/GeometryObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/GeometryObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/GeometryObject.cpp [ 66%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemSetFacesObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemSetFacesObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemSetFacesObject.cpp [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawPagePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawPagePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawPagePyImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qabstractspinbox.h:43, from /usr/include/qt5/QtWidgets/QAbstractSpinBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewDetail.cpp:70: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemSetElementsObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemSetElementsObject.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawUtil.h:42, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/Geometry.cpp:74: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemSetGeometryObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemSetGeometryObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemSetGeometryObject.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawPagePyImp.cpp:4: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawViewPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawViewPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewPyImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemSetFacesObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemSetFacesObject.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/TaskView/TaskDialogPython.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/TaskView/TaskDialogPython.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialogPython.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/GeometryObject.cpp:72: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawPagePyImp.cpp:19: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawPagePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawPagePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/TaskView/TaskWatcher.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/TaskView/TaskWatcher.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.cpp [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawViewPartPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawViewPartPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewPartPyImp.cpp [ 66%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/AppFem.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/AppFem.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/AppFem.cpp [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawViewSymbolPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawViewSymbolPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewSymbolPyImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemSetGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemSetGeometryObject.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawView.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewPyImp.cpp:4: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewPyImp.cpp:8: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawViewPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawViewPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 66%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/AppFemPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/AppFemPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/AppFemPy.cpp [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawTemplatePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawTemplatePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawTemplatePyImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialogPython.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialogPython.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawParametricTemplatePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawParametricTemplatePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawParametricTemplatePyImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewPart.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewPartPyImp.cpp:4: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewSymbol.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewSymbolPyImp.cpp:8: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialogPython.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialogPython.cpp:33: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialogPython.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.h:115:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 115 | DlgPreferencesImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialogPython.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialogPython.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.h:54:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 54 | DlgCustomizeImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialogPython.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.cpp:37: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemMesh.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App/FemMeshPy.h:8, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/AppFem.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.cpp:32: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewPartPyImp.cpp:8: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawViewPartPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawViewPartPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewSymbolPyImp.cpp:14: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawViewSymbolPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawViewSymbolPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.cpp: In constructor 'Gui::TaskView::TaskWatcherCommands::TaskWatcherCommands(const char*, const char**, const char*, const char*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.cpp:92:57: warning: 'static QString Gui::TaskView::TaskWatcherCommands::trUtf8(const char*, const char*, int)' is deprecated [-Wdeprecated-declarations] 92 | (BitmapFactory().pixmap(pixmap), trUtf8(name), true, 0); | ^ In file included from /usr/include/qt5/QtGui/qwindowdefs.h:44, from /usr/include/qt5/QtGui/qpaintdevice.h:44, from /usr/include/qt5/QtGui/qpixmap.h:44, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.cpp:27: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:70:5: note: declared here 70 | Q_OBJECT | ^~~~~~~~ [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawSVGTemplatePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawSVGTemplatePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawSVGTemplatePyImp.cpp [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawViewClipPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawViewClipPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewClipPyImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawTemplate.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawTemplatePyImp.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemTools.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemTools.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemTools.cpp [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iisfreecadscheme.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iisfreecadscheme.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/iisTaskPanel/src/iisfreecadscheme.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawParametricTemplate.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawParametricTemplatePyImp.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawTemplatePyImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawTemplatePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawTemplatePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawViewDimensionPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawViewDimensionPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewDimensionPyImp.cpp [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iisiconlabel.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iisiconlabel.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/iisTaskPanel/src/iisiconlabel.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/AppFemPy.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawParametricTemplatePyImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawParametricTemplatePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawParametricTemplatePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawHatchPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawHatchPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawHatchPyImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewClipPyImp.cpp:4: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawSVGTemplate.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawSVGTemplatePyImp.cpp:4: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawGeomHatchPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawGeomHatchPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawGeomHatchPyImp.cpp [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iistaskbox.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iistaskbox.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/iisTaskPanel/src/iistaskbox.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawSVGTemplatePyImp.cpp:8: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawSVGTemplatePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawSVGTemplatePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewClipPyImp.cpp:13: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawViewClipPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawViewClipPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewDimension.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewDimensionPyImp.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/iisTaskPanel/src/iisiconlabel.cpp: In member function 'virtual QSize iisIconLabel::minimumSizeHint() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/iisTaskPanel/src/iisiconlabel.cpp:77:29: warning: 'int QFontMetrics::width(const QString&, int) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 77 | w += fm.width(myText); | ^ In file included from /usr/include/qt5/QtGui/QtGui:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/iisTaskPanel/src/iisiconlabel.h:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/iisTaskPanel/src/iisiconlabel.cpp:8: /usr/include/qt5/QtGui/qfontmetrics.h:106:9: note: declared here 106 | int width(const QString &, int len = -1) const; | ^~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawHatch.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawHatchPyImp.cpp:4: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/PreCompiled.cpp [ 66%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemMeshPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemMeshPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemMeshPyImp.cpp [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawViewCollectionPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawViewCollectionPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewCollectionPyImp.cpp [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawProjGroupPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawProjGroupPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawProjGroupPyImp.cpp [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iistaskgroup.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iistaskgroup.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/iisTaskPanel/src/iistaskgroup.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawHatchPyImp.cpp:8: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawHatchPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawHatchPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawGeomHatch.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawGeomHatchPyImp.cpp:4: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewDimensionPyImp.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawViewDimensionPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawViewDimensionPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/iisTaskPanel/src/iistaskbox.cpp: In member function 'void iisTaskBox::showHide()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/iisTaskPanel/src/iistaskbox.cpp:80:61: warning: 'static QPixmap QPixmap::grabWidget(QObject*, const QRect&)' is deprecated: Use QWidget::grab() instead [-Wdeprecated-declarations] 80 | m_foldPixmap = QPixmap::grabWidget(myGroup, myGroup->rect()); | ^ In file included from /usr/include/qt5/QtGui/qbrush.h:52, from /usr/include/qt5/QtGui/qpen.h:45, from /usr/include/qt5/QtGui/qtextformat.h:49, from /usr/include/qt5/QtGui/qtextlayout.h:50, from /usr/include/qt5/QtGui/qabstracttextdocumentlayout.h:45, from /usr/include/qt5/QtGui/QtGui:5, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/iisTaskPanel/src/iistaskbox.h:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/iisTaskPanel/src/iistaskbox.cpp:8: /usr/include/qt5/QtGui/qpixmap.h:120:20: note: declared here 120 | static QPixmap grabWidget(QObject *widget, const QRect &rect); | ^~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemMeshPyImp.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App/FemMeshPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App/FemMeshPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawGeomHatchPyImp.cpp:8: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawGeomHatchPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawGeomHatchPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawProjGroupItemPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawProjGroupItemPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawProjGroupItemPyImp.cpp [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iistaskheader.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iistaskheader.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/iisTaskPanel/src/iistaskheader.cpp [ 66%] Building CXX object src/Mod/TechDraw/App/CMakeFiles/TechDraw.dir/DrawViewAnnotationPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_ACOSH -DHAVE_ASINH -DHAVE_ATANH -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DTechDraw_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDraw.dir/DrawViewAnnotationPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewAnnotationPyImp.cpp [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iistaskpanel.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iistaskpanel.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/iisTaskPanel/src/iistaskpanel.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewCollection.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewCollectionPyImp.cpp:4: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawProjGroupPyImp.cpp:4: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iistaskpanelscheme.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iistaskpanelscheme.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/iisTaskPanel/src/iistaskpanelscheme.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewCollectionPyImp.cpp:8: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawViewCollectionPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawViewCollectionPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawProjGroupItem.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawProjGroupItemPyImp.cpp:4: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawProjGroupPyImp.cpp:12: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawProjGroupPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawProjGroupPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iiswinxptaskpanelscheme.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iiswinxptaskpanelscheme.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/iisTaskPanel/src/iiswinxptaskpanelscheme.cpp [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/QSint/actionpanel/actionbox.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/actionbox.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/actionbox.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewAnnotationPyImp.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 66%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/HypothesisPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/HypothesisPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/HypothesisPy.cpp [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/QSint/actionpanel/actionlabel.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/actionlabel.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/actionlabel.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/actionbox.cpp:8: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/actionbox.cpp:8: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/QSint/actionpanel/actiongroup.cpp.o In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawProjGroupItemPyImp.cpp:8: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawProjGroupItemPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawProjGroupItemPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/actiongroup.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/actiongroup.cpp [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/QSint/actionpanel/actionpanel.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/actionpanel.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/actionpanel.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewAnnotationPyImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawViewAnnotationPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App/DrawViewAnnotationPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/QSint/actionpanel/actionpanelscheme.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/actionpanelscheme.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/actionpanelscheme.cpp [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/QSint/actionpanel/androidpanelscheme.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/androidpanelscheme.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/androidpanelscheme.cpp [ 66%] Linking CXX shared library ../../../../Mod/TechDraw/TechDraw.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/TechDraw.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,TechDraw.so -o ../../../../Mod/TechDraw/TechDraw.so CMakeFiles/TechDraw.dir/AppTechDraw.cpp.o CMakeFiles/TechDraw.dir/AppTechDrawPy.cpp.o CMakeFiles/TechDraw.dir/DrawUtil.cpp.o CMakeFiles/TechDraw.dir/HatchLine.cpp.o CMakeFiles/TechDraw.dir/PreCompiled.cpp.o CMakeFiles/TechDraw.dir/EdgeWalker.cpp.o CMakeFiles/TechDraw.dir/DrawProjectSplit.cpp.o CMakeFiles/TechDraw.dir/LineGroup.cpp.o CMakeFiles/TechDraw.dir/DrawPage.cpp.o CMakeFiles/TechDraw.dir/DrawView.cpp.o CMakeFiles/TechDraw.dir/DrawViewPart.cpp.o CMakeFiles/TechDraw.dir/DrawViewAnnotation.cpp.o CMakeFiles/TechDraw.dir/DrawViewSymbol.cpp.o CMakeFiles/TechDraw.dir/DrawViewSpreadsheet.cpp.o CMakeFiles/TechDraw.dir/DrawViewClip.cpp.o CMakeFiles/TechDraw.dir/DrawProjGroup.cpp.o CMakeFiles/TechDraw.dir/DrawProjGroupItem.cpp.o CMakeFiles/TechDraw.dir/DrawParametricTemplate.cpp.o CMakeFiles/TechDraw.dir/DrawSVGTemplate.cpp.o CMakeFiles/TechDraw.dir/DrawTemplate.cpp.o CMakeFiles/TechDraw.dir/DrawViewCollection.cpp.o CMakeFiles/TechDraw.dir/DrawViewDimension.cpp.o CMakeFiles/TechDraw.dir/DrawViewSection.cpp.o CMakeFiles/TechDraw.dir/DrawHatch.cpp.o CMakeFiles/TechDraw.dir/DrawGeomHatch.cpp.o CMakeFiles/TechDraw.dir/DrawViewDraft.cpp.o CMakeFiles/TechDraw.dir/DrawViewArch.cpp.o CMakeFiles/TechDraw.dir/DrawViewMulti.cpp.o CMakeFiles/TechDraw.dir/DrawViewImage.cpp.o CMakeFiles/TechDraw.dir/DrawViewDetail.cpp.o CMakeFiles/TechDraw.dir/Geometry.cpp.o CMakeFiles/TechDraw.dir/GeometryObject.cpp.o CMakeFiles/TechDraw.dir/DrawPagePyImp.cpp.o CMakeFiles/TechDraw.dir/DrawViewPyImp.cpp.o CMakeFiles/TechDraw.dir/DrawViewPartPyImp.cpp.o CMakeFiles/TechDraw.dir/DrawViewSymbolPyImp.cpp.o CMakeFiles/TechDraw.dir/DrawTemplatePyImp.cpp.o CMakeFiles/TechDraw.dir/DrawParametricTemplatePyImp.cpp.o CMakeFiles/TechDraw.dir/DrawSVGTemplatePyImp.cpp.o CMakeFiles/TechDraw.dir/DrawViewClipPyImp.cpp.o CMakeFiles/TechDraw.dir/DrawViewDimensionPyImp.cpp.o CMakeFiles/TechDraw.dir/DrawHatchPyImp.cpp.o CMakeFiles/TechDraw.dir/DrawGeomHatchPyImp.cpp.o CMakeFiles/TechDraw.dir/DrawViewCollectionPyImp.cpp.o CMakeFiles/TechDraw.dir/DrawProjGroupPyImp.cpp.o CMakeFiles/TechDraw.dir/DrawProjGroupItemPyImp.cpp.o CMakeFiles/TechDraw.dir/DrawViewAnnotationPyImp.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Measure:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Drawing:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Spreadsheet:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Measure/Measure.so ../../../../Mod/Drawing/Drawing.so ../../../../Mod/Import/Import.so ../../../../Mod/Spreadsheet/Spreadsheet.so ../../../../Mod/Part/Part.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKXDESTEP.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXDEIGES.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKXCAF.so.7.4.1 /usr/lib64/libTKVCAF.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKMeshVS.so.7.4.1 /usr/lib64/libTKV3d.so.7.4.1 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKService.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so -lfontconfig -lGL -lX11 -lXext -lXmu -lXi /usr/lib64/libfreetype.so [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/QSint/actionpanel/macpanelscheme.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/macpanelscheme.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/macpanelscheme.cpp [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/QSint/actionpanel/taskgroup_p.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/taskgroup_p.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/taskgroup_p.cpp [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/QSint/actionpanel/taskheader_p.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/taskheader_p.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/taskheader_p.cpp [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/QSint/actionpanel/winvistapanelscheme.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/winvistapanelscheme.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/winvistapanelscheme.cpp [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/QSint/actionpanel/winxppanelscheme.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/winxppanelscheme.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/winxppanelscheme.cpp [ 66%] Building CXX object src/Mod/Fem/App/CMakeFiles/Fem.dir/FemPostPipelinePyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFem_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_NO_DEBUG -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/Fem.dir/FemPostPipelinePyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemPostPipelinePyImp.cpp [ 66%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/QSint/actionpanel/freecadscheme.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/freecadscheme.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/freecadscheme.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/taskgroup_p.cpp: In member function 'virtual void QSint::TaskGroup::keyPressEvent(QKeyEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/taskgroup_p.cpp:109:52: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::KeyboardModifier; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 109 | QKeyEvent ke(QEvent::KeyPress, Qt::Key_Tab, 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/actionpanelscheme.h:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/taskgroup_p.h:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/taskgroup_p.cpp:8: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/taskgroup_p.cpp: In member function 'virtual void QSint::TaskGroup::keyReleaseEvent(QKeyEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/taskgroup_p.cpp:134:54: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::KeyboardModifier; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 134 | QKeyEvent ke(QEvent::KeyRelease, Qt::Key_Tab, 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/actionpanelscheme.h:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/taskgroup_p.h:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/taskgroup_p.cpp:8: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/cmake -E copy_directory /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Patterns /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build//usr/share/freecad/Mod/TechDraw/Patterns cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/App && /usr/bin/cmake -E copy_directory /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Templates /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build//usr/share/freecad/Mod/TechDraw/Templates gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 67%] Built target TechDraw [ 67%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/ContextMenu.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/ContextMenu.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/ContextMenu.cpp [ 67%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/DragDropHandler.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/DragDropHandler.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/DragDropHandler.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/taskheader_p.cpp: In member function 'virtual void QSint::TaskHeader::keyPressEvent(QKeyEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/taskheader_p.cpp:267:52: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::KeyboardModifier; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 267 | QKeyEvent ke(QEvent::KeyPress, Qt::Key_Tab, 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/actionpanelscheme.h:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/taskheader_p.h:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/taskheader_p.cpp:8: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/taskheader_p.cpp: In member function 'virtual void QSint::TaskHeader::keyReleaseEvent(QKeyEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/taskheader_p.cpp:291:54: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::KeyboardModifier; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 291 | QKeyEvent ke(QEvent::KeyRelease, Qt::Key_Tab, 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/actionpanelscheme.h:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/taskheader_p.h:11, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/actionpanel/taskheader_p.cpp:8: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 67%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/EventFilter.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/EventFilter.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/EventFilter.cpp [ 67%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/FocusHandler.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/FocusHandler.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/FocusHandler.cpp [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/ImageReader.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/ImageReader.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/ImageReader.cpp [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/InputDevice.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/InputDevice.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/InputDevice.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/ContextMenu.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/QObject:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/ContextMenu.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/ContextMenu.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/ContextMenu.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/QObject:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/ContextMenu.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/ContextMenu.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/ContextMenu.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/QObject:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/ContextMenu.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/ContextMenu.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/DragDropHandler.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/QObject:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/eventhandlers/DragDropHandler.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/DragDropHandler.cpp:40: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/DragDropHandler.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/QObject:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/eventhandlers/DragDropHandler.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/DragDropHandler.cpp:40: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/DragDropHandler.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/QObject:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/eventhandlers/DragDropHandler.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/DragDropHandler.cpp:40: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/InteractionMode.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/InteractionMode.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/InteractionMode.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/FocusHandler.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/QObject:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/eventhandlers/FocusHandler.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/FocusHandler.cpp:40: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/FocusHandler.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/QObject:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/eventhandlers/FocusHandler.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/FocusHandler.cpp:40: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/FocusHandler.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/QObject:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/eventhandlers/FocusHandler.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/FocusHandler.cpp:40: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/Keyboard.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/Keyboard.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/Keyboard.cpp [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/KeyboardP.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/KeyboardP.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/KeyboardP.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/EventFilter.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/QObject:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/eventhandlers/EventFilter.h:37, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/EventFilter.cpp:37: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/EventFilter.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/QObject:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/eventhandlers/EventFilter.h:37, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/EventFilter.cpp:37: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/EventFilter.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/QObject:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/eventhandlers/EventFilter.h:37, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/EventFilter.cpp:37: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/Mouse.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/Mouse.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/Mouse.cpp [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/NativeEvent.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/NativeEvent.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/NativeEvent.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemPostObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemPostPipeline.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemPostPipelinePyImp.cpp:26: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/QtCoinCompatibility.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/QtCoinCompatibility.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QtCoinCompatibility.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/InteractionMode.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/QObject:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/InteractionMode.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/InteractionMode.cpp:1: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/InteractionMode.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/QObject:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/InteractionMode.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/InteractionMode.cpp:1: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/InteractionMode.cpp:5: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/QObject:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/InteractionMode.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/InteractionMode.cpp:1: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/Quarter.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/Quarter.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/Quarter.cpp [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/QuarterP.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/QuarterP.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterP.cpp [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/QuarterWidget.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/QuarterWidget.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.cpp [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/QuarterWidgetP.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/QuarterWidgetP.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidgetP.cpp [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/SensorManager.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/SensorManager.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SensorManager.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemPostPipelinePyImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App/FemPostPipelinePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App/FemPostPipelinePy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/SignalThread.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/SignalThread.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SignalThread.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/Mouse.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qcoreevent.h:43, from /usr/include/qt5/QtCore/QEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/Mouse.cpp:46: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/Mouse.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qcoreevent.h:43, from /usr/include/qt5/QtCore/QEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/Mouse.cpp:46: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/Mouse.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qcoreevent.h:43, from /usr/include/qt5/QtCore/QEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/Mouse.cpp:46: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/Mouse.cpp: In member function 'const SoEvent* SIM::Coin3D::Quarter::MouseP::mouseWheelEvent(QWheelEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/Mouse.cpp:165:26: warning: 'QPoint QWheelEvent::pos() const' is deprecated: Use position() [-Wdeprecated-declarations] 165 | SbVec2s pos(event->pos().x(), PUBLIC(this)->windowsize[1] - event->pos().y() - 1); | ^ In file included from /usr/include/qt5/QtGui/QMouseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/Mouse.cpp:48: /usr/include/qt5/QtGui/qevent.h:225:19: note: declared here 225 | inline QPoint pos() const { return p.toPoint(); } | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/Mouse.cpp:165:74: warning: 'QPoint QWheelEvent::pos() const' is deprecated: Use position() [-Wdeprecated-declarations] 165 | SbVec2s pos(event->pos().x(), PUBLIC(this)->windowsize[1] - event->pos().y() - 1); | ^ In file included from /usr/include/qt5/QtGui/QMouseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/Mouse.cpp:48: /usr/include/qt5/QtGui/qevent.h:225:19: note: declared here 225 | inline QPoint pos() const { return p.toPoint(); } | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/Mouse.cpp:178:17: warning: 'int QWheelEvent::delta() const' is deprecated: Use angleDelta() [-Wdeprecated-declarations] 178 | (event->delta() > 0) ? | ^ In file included from /usr/include/qt5/QtGui/QMouseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/Mouse.cpp:48: /usr/include/qt5/QtGui/qevent.h:219:16: note: declared here 219 | inline int delta() const { return qt4D; } | ^~~~~ [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/SoQTQuarterAdaptor.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/SoQTQuarterAdaptor.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.cpp [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/SpaceNavigatorDevice.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/SpaceNavigatorDevice.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SpaceNavigatorDevice.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.cpp:57: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.cpp:57: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.cpp:57: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidgetP.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcursor.h:43, from /usr/include/qt5/QtGui/QCursor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidgetP.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidgetP.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidgetP.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcursor.h:43, from /usr/include/qt5/QtGui/QCursor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidgetP.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidgetP.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidgetP.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcursor.h:43, from /usr/include/qt5/QtGui/QCursor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidgetP.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidgetP.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.cpp:153:129: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 153 | CustomGLWidget(const QSurfaceFormat& format, QWidget* parent = 0, const QOpenGLWidget* shareWidget = 0, Qt::WindowFlags f = 0) | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.cpp:57: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.cpp: In member function 'void SIM::Coin3D::Quarter::QuarterWidget::constructor(const QtGLFormat&, const QtGLWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.cpp:275:59: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 275 | setViewport(new CustomGLWidget(format, this, sharewidget)); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.cpp:57: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.cpp: In member function 'void SIM::Coin3D::Quarter::QuarterWidget::replaceViewport()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.cpp:330:67: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 330 | CustomGLWidget* newvp = new CustomGLWidget(oldvp->myFormat, this); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.cpp:57: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.cpp: In member function 'void SIM::Coin3D::Quarter::QuarterWidget::setSoRenderManager(SoRenderManager*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.cpp:696:60: warning: implicitly-declared 'constexpr SbViewportRegion& SbViewportRegion::operator=(const SbViewportRegion&)' is deprecated [-Wdeprecated-copy] 696 | vp = PRIVATE(this)->sorendermanager->getViewportRegion(); | ^ In file included from /usr/include/Coin4/Inventor/actions/SoGLRenderAction.h:39, from /usr/include/Coin4/Inventor/SoRenderManager.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:37, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.cpp:57: /usr/include/Coin4/Inventor/SbViewportRegion.h:45:3: note: because 'SbViewportRegion' has user-provided 'SbViewportRegion::SbViewportRegion(const SbViewportRegion&)' 45 | SbViewportRegion(const SbViewportRegion & vpReg); | ^~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.cpp: In member function 'void SIM::Coin3D::Quarter::QuarterWidget::setSoEventManager(SoEventManager*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.cpp:741:59: warning: implicitly-declared 'constexpr SbViewportRegion& SbViewportRegion::operator=(const SbViewportRegion&)' is deprecated [-Wdeprecated-copy] 741 | vp = PRIVATE(this)->soeventmanager->getViewportRegion(); | ^ In file included from /usr/include/Coin4/Inventor/actions/SoGLRenderAction.h:39, from /usr/include/Coin4/Inventor/SoRenderManager.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:37, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.cpp:57: /usr/include/Coin4/Inventor/SbViewportRegion.h:45:3: note: because 'SbViewportRegion' has user-provided 'SbViewportRegion::SbViewportRegion(const SbViewportRegion&)' 45 | SbViewportRegion(const SbViewportRegion & vpReg); | ^~~~~~~~~~~~~~~~ [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/moc_SignalThread.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/moc_SignalThread.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/moc_SignalThread.cpp [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/moc_InteractionMode.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/moc_InteractionMode.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/moc_InteractionMode.cpp [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/moc_SensorManager.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/moc_SensorManager.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/moc_SensorManager.cpp [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/moc_ContextMenu.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/moc_ContextMenu.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/moc_ContextMenu.cpp [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/eventhandlers/moc_FocusHandler.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/eventhandlers/moc_FocusHandler.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/eventhandlers/moc_FocusHandler.cpp [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/eventhandlers/moc_DragDropHandler.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/eventhandlers/moc_DragDropHandler.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/eventhandlers/moc_DragDropHandler.cpp [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/eventhandlers/moc_EventFilter.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/eventhandlers/moc_EventFilter.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/eventhandlers/moc_EventFilter.cpp [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Quarter/moc_QuarterWidget.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Quarter/moc_QuarterWidget.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/moc_QuarterWidget.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.cpp:22: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.cpp:22: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.cpp:22: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.cpp:22: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.cpp:22: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.cpp:22: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.cpp:22: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Flag.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Flag.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Flag.cpp [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/GLBuffer.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/GLBuffer.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLBuffer.cpp In file included from /usr/include/Coin4/Inventor/C/glue/gl.h:42, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLBuffer.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLBuffer.cpp:46: /usr/include/Coin4/Inventor/system/gl.h:45: warning: "GL_GLEXT_PROTOTYPES" redefined 45 | #define GL_GLEXT_PROTOTYPES 1 | /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLBuffer.cpp:27: note: this is the location of the previous definition 27 | #define GL_GLEXT_PROTOTYPES | [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/GLPainter.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/GLPainter.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLPainter.cpp [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/MouseSelection.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/MouseSelection.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MouseSelection.cpp [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/NavigationStyle.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/NavigationStyle.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NavigationStyle.cpp [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/InventorNavigationStyle.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/InventorNavigationStyle.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InventorNavigationStyle.cpp [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/CADNavigationStyle.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/CADNavigationStyle.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CADNavigationStyle.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/moc_QuarterWidget.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/../../../../src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/../../../../src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/moc_QuarterWidget.cpp:10: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/moc_QuarterWidget.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/../../../../src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/../../../../src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/moc_QuarterWidget.cpp:10: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/moc_QuarterWidget.cpp:10: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/../../../../src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/../../../../src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter/moc_QuarterWidget.cpp:10: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 68%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/RevitNavigationStyle.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/RevitNavigationStyle.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/RevitNavigationStyle.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLPainter.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qopenglcontext.h:43, from /usr/include/qt5/QtGui/QOpenGLContext:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/QtOpenGL.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLPainter.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLPainter.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLPainter.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qopenglcontext.h:43, from /usr/include/qt5/QtGui/QOpenGLContext:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/QtOpenGL.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLPainter.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLPainter.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLPainter.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qopenglcontext.h:43, from /usr/include/qt5/QtGui/QOpenGLContext:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/QtOpenGL.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLPainter.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLPainter.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLPainter.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qopenglcontext.h:43, from /usr/include/qt5/QtGui/QOpenGLContext:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/QtOpenGL.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLPainter.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLPainter.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLPainter.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qopenglcontext.h:43, from /usr/include/qt5/QtGui/QOpenGLContext:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/QtOpenGL.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLPainter.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLPainter.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLPainter.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qopenglcontext.h:43, from /usr/include/qt5/QtGui/QOpenGLContext:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/QtOpenGL.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLPainter.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLPainter.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Flag.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Flag.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Flag.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Flag.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Flag.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Flag.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Flag.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Flag.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Flag.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Flag.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Flag.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Flag.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GLPainter.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NavigationStyle.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NavigationStyle.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NavigationStyle.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NavigationStyle.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NavigationStyle.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NavigationStyle.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NavigationStyle.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NavigationStyle.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NavigationStyle.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NavigationStyle.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NavigationStyle.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NavigationStyle.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InventorNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InventorNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InventorNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InventorNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InventorNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InventorNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InventorNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InventorNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InventorNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InventorNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InventorNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InventorNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Flag.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CADNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CADNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CADNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CADNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CADNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CADNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CADNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CADNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CADNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CADNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CADNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CADNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NavigationStyle.cpp:42: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InventorNavigationStyle.cpp:41: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CADNavigationStyle.cpp:41: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/RevitNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/RevitNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/RevitNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/RevitNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/RevitNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/RevitNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/RevitNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/RevitNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/RevitNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/RevitNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/RevitNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/RevitNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MouseSelection.cpp:43: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/RevitNavigationStyle.cpp:41: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/BlenderNavigationStyle.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/BlenderNavigationStyle.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BlenderNavigationStyle.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MouseSelection.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MouseSelection.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MouseSelection.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MouseSelection.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MouseSelection.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MouseSelection.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MouseSelection.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MouseSelection.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MouseSelection.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MouseSelection.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/MayaGestureNavigationStyle.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/MayaGestureNavigationStyle.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MayaGestureNavigationStyle.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MouseSelection.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MouseSelection.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MouseSelection.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MouseSelection.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MouseSelection.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MouseSelection.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 69%] Linking CXX shared library ../../../../Mod/Fem/Fem.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/App && /usr/bin/cmake -E cmake_link_script CMakeFiles/Fem.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,Fem.so -o ../../../../Mod/Fem/Fem.so CMakeFiles/Fem.dir/FemMeshObject.cpp.o CMakeFiles/Fem.dir/FemMeshShapeObject.cpp.o CMakeFiles/Fem.dir/FemMeshShapeNetgenObject.cpp.o CMakeFiles/Fem.dir/FemAnalysis.cpp.o CMakeFiles/Fem.dir/FemMesh.cpp.o CMakeFiles/Fem.dir/FemResultObject.cpp.o CMakeFiles/Fem.dir/FemSolverObject.cpp.o CMakeFiles/Fem.dir/FemConstraint.cpp.o CMakeFiles/Fem.dir/FemMeshProperty.cpp.o CMakeFiles/Fem.dir/FemConstraintBearing.cpp.o CMakeFiles/Fem.dir/FemConstraintFixed.cpp.o CMakeFiles/Fem.dir/FemConstraintForce.cpp.o CMakeFiles/Fem.dir/FemConstraintFluidBoundary.cpp.o CMakeFiles/Fem.dir/FemConstraintPressure.cpp.o CMakeFiles/Fem.dir/FemConstraintGear.cpp.o CMakeFiles/Fem.dir/FemConstraintPulley.cpp.o CMakeFiles/Fem.dir/FemConstraintDisplacement.cpp.o CMakeFiles/Fem.dir/FemConstraintTemperature.cpp.o CMakeFiles/Fem.dir/FemConstraintHeatflux.cpp.o CMakeFiles/Fem.dir/FemConstraintInitialTemperature.cpp.o CMakeFiles/Fem.dir/FemConstraintPlaneRotation.cpp.o CMakeFiles/Fem.dir/FemConstraintContact.cpp.o CMakeFiles/Fem.dir/FemConstraintTransform.cpp.o CMakeFiles/Fem.dir/PropertyPostDataObject.cpp.o CMakeFiles/Fem.dir/FemPostObject.cpp.o CMakeFiles/Fem.dir/FemPostPipeline.cpp.o CMakeFiles/Fem.dir/FemPostFilter.cpp.o CMakeFiles/Fem.dir/FemPostFunction.cpp.o CMakeFiles/Fem.dir/FemVTKTools.cpp.o CMakeFiles/Fem.dir/FemSetObject.cpp.o CMakeFiles/Fem.dir/FemSetNodesObject.cpp.o CMakeFiles/Fem.dir/FemSetElementsObject.cpp.o CMakeFiles/Fem.dir/FemSetFacesObject.cpp.o CMakeFiles/Fem.dir/FemSetGeometryObject.cpp.o CMakeFiles/Fem.dir/AppFem.cpp.o CMakeFiles/Fem.dir/AppFemPy.cpp.o CMakeFiles/Fem.dir/FemTools.cpp.o CMakeFiles/Fem.dir/PreCompiled.cpp.o CMakeFiles/Fem.dir/FemMeshPyImp.cpp.o CMakeFiles/Fem.dir/HypothesisPy.cpp.o CMakeFiles/Fem.dir/FemPostPipelinePyImp.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Part/Part.so ../../../../lib/libFreeCADApp.so ../../../../lib/libStdMeshers.so ../../../../lib/libSMESH.so /usr/lib64/libdouble-conversion.so /usr/lib64/liblz4.so /usr/lib64/liblzma.so /usr/lib64/libz.so /usr/lib64/libexpat.so /usr/lib64/libjpeg.so /usr/lib64/libpng.so /usr/lib64/libtiff.so /usr/lib64/libnetcdf.so /usr/lib64/libhdf5.so /usr/lib64/libdl.so /usr/lib64/libm.so /usr/lib64/libhdf5_hl.so /usr/lib64/libjsoncpp.so /usr/lib64/libfreetype.so /usr/lib64/libGLEW.so ../../../../lib/libFreeCADBase.so /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 ../../../../lib/libDriverSTL.so ../../../../lib/libDriverDAT.so ../../../../lib/libDriverUNV.so ../../../../lib/libSMESHDS.so ../../../../lib/libSMDS.so /usr/lib64/libvtkFiltersVerdict-8.2.so.1 /usr/lib64/libvtkverdict-8.2.so.1 /usr/lib64/libvtkIOMPIParallel-8.2.so.1 /usr/lib64/libvtkIOParallel-8.2.so.1 /usr/lib64/libvtkIOGeometry-8.2.so.1 /usr/lib64/libvtkIOImage-8.2.so.1 /usr/lib64/libvtkDICOMParser-8.2.so.1 /usr/lib64/libvtkmetaio-8.2.so.1 /usr/lib64/libvtkIONetCDF-8.2.so.1 /usr/lib64/libvtkexodusII-8.2.so.1 /usr/lib64/libvtkFiltersParallelDIY2-8.2.so.1 /usr/lib64/libvtkIOXML-8.2.so.1 /usr/lib64/libvtkIOXMLParser-8.2.so.1 /usr/lib64/libvtkFiltersParallel-8.2.so.1 /usr/lib64/libvtkFiltersModeling-8.2.so.1 /usr/lib64/libvtkParallelMPI-8.2.so.1 /usr/lib64/libvtkParallelCore-8.2.so.1 /usr/lib64/libvtkIOLegacy-8.2.so.1 /usr/lib64/libvtkIOCore-8.2.so.1 /usr/lib64/libvtkInteractionStyle-8.2.so.1 /usr/lib64/libvtkFiltersExtraction-8.2.so.1 /usr/lib64/libvtkFiltersStatistics-8.2.so.1 /usr/lib64/libvtkImagingFourier-8.2.so.1 /usr/lib64/libvtkImagingCore-8.2.so.1 /usr/lib64/libvtkRenderingFreeType-8.2.so.1 /usr/lib64/libvtkRenderingOpenGL2-8.2.so.1 /usr/lib64/libvtkRenderingCore-8.2.so.1 /usr/lib64/libvtkFiltersSources-8.2.so.1 /usr/lib64/libvtkFiltersGeneral-8.2.so.1 /usr/lib64/libvtkCommonComputationalGeometry-8.2.so.1 /usr/lib64/libvtkFiltersGeometry-8.2.so.1 /usr/lib64/libvtkFiltersCore-8.2.so.1 /usr/lib64/libvtkCommonExecutionModel-8.2.so.1 /usr/lib64/libvtkCommonColor-8.2.so.1 /usr/lib64/libvtkCommonDataModel-8.2.so.1 /usr/lib64/libvtkCommonMisc-8.2.so.1 /usr/lib64/libvtkCommonSystem-8.2.so.1 /usr/lib64/libvtkCommonTransforms-8.2.so.1 /usr/lib64/libvtkCommonMath-8.2.so.1 /usr/lib64/libvtkCommonCore-8.2.so.1 /usr/lib64/libvtksys-8.2.so.1 /usr/lib64/libSM.so /usr/lib64/libICE.so /usr/lib64/libX11.so /usr/lib64/libXext.so /usr/lib64/libXt.so /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread ../../../../lib/libDriver.so /usr/lib64/libmedC.so /usr/lib64/libmed.so /usr/lib64/libdouble-conversion.so /usr/lib64/liblz4.so /usr/lib64/liblzma.so /usr/lib64/libz.so /usr/lib64/libexpat.so /usr/lib64/libjpeg.so /usr/lib64/libpng.so /usr/lib64/libtiff.so /usr/lib64/libnetcdf.so /usr/lib64/libhdf5.so /usr/lib64/libdl.so /usr/lib64/libm.so /usr/lib64/libhdf5_hl.so /usr/lib64/libjsoncpp.so /usr/lib64/libGLEW.so ../../../../lib/libMEFISTO2.so -lmpi_cxx -lmpi /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKXDESTEP.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXDEIGES.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKXCAF.so.7.4.1 /usr/lib64/libTKVCAF.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKMeshVS.so.7.4.1 /usr/lib64/libTKV3d.so.7.4.1 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKService.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so -lfontconfig -lGL -lX11 -lXext -lXmu -lXi /usr/lib64/libfreetype.so [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/OpenCascadeNavigationStyle.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/OpenCascadeNavigationStyle.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/OpenCascadeNavigationStyle.cpp [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/TouchpadNavigationStyle.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/TouchpadNavigationStyle.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TouchpadNavigationStyle.cpp [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/GestureNavigationStyle.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/GestureNavigationStyle.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GestureNavigationStyle.cpp [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SplitView3DInventor.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SplitView3DInventor.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.cpp [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/View.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/View.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 69%] Built target Fem [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/View3DInventor.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/View3DInventor.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MayaGestureNavigationStyle.cpp:78: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MayaGestureNavigationStyle.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MayaGestureNavigationStyle.cpp:78: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MayaGestureNavigationStyle.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MayaGestureNavigationStyle.cpp:78: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MayaGestureNavigationStyle.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MayaGestureNavigationStyle.cpp:78: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MayaGestureNavigationStyle.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MayaGestureNavigationStyle.cpp:78: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MayaGestureNavigationStyle.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MayaGestureNavigationStyle.cpp:78: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MayaGestureNavigationStyle.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BlenderNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BlenderNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BlenderNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BlenderNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BlenderNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BlenderNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BlenderNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BlenderNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BlenderNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BlenderNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BlenderNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BlenderNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GestureNavigationStyle.cpp:72: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GestureNavigationStyle.cpp:52: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GestureNavigationStyle.cpp:72: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GestureNavigationStyle.cpp:52: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GestureNavigationStyle.cpp:72: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GestureNavigationStyle.cpp:52: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GestureNavigationStyle.cpp:72: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GestureNavigationStyle.cpp:52: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GestureNavigationStyle.cpp:72: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GestureNavigationStyle.cpp:52: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GestureNavigationStyle.cpp:72: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GestureNavigationStyle.cpp:52: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/OpenCascadeNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/OpenCascadeNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/OpenCascadeNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/OpenCascadeNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/OpenCascadeNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/OpenCascadeNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/OpenCascadeNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/OpenCascadeNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/OpenCascadeNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/OpenCascadeNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/OpenCascadeNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/OpenCascadeNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/BlenderNavigationStyle.cpp:41: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MayaGestureNavigationStyle.cpp:75: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/OpenCascadeNavigationStyle.cpp:41: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TouchpadNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TouchpadNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TouchpadNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TouchpadNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TouchpadNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TouchpadNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TouchpadNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TouchpadNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TouchpadNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TouchpadNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TouchpadNavigationStyle.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TouchpadNavigationStyle.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GestureNavigationStyle.cpp:69: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View.cpp:27: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TouchpadNavigationStyle.cpp:41: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.h:45:90: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 45 | AbstractSplitView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.h:111:103: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 111 | SplitView3DInventor(int views, Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SplitView3DInventor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/View3DInventorExamples.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/View3DInventorExamples.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorExamples.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View.cpp:27: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmainwindow.h:43, from /usr/include/qt5/QtWidgets/QMainWindow:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/View3DInventorViewer.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/View3DInventorViewer.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/View3DInventorRiftViewer.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/View3DInventorRiftViewer.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorRiftViewer.cpp [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/CoinRiftWidget.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/CoinRiftWidget.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/CoinRiftWidget.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:69: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/View3DPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/View3DPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DPy.cpp [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/View3DViewerPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/View3DViewerPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DViewerPy.cpp [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/NaviCube.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/NaviCube.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NaviCube.cpp [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProvider.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProvider.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.cpp [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderExtension.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderExtension.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderExtension.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:71: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:71: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:72: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:72: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:72: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:72: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:72: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:72: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:74: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:74: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:74: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp: In member function 'virtual void Gui::View3DInventor::printPdf()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:466:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 466 | QString::fromLatin1("%1 (*.pdf)").arg(tr("PDF file"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp: In member function 'virtual void Gui::View3DInventor::printPreview()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:481:37: warning: 'virtual void QPrinter::setPageSize(QPagedPaintDevice::PageSize)' is deprecated: Use setPageSize(QPageSize) instead. [-Wdeprecated-declarations] 481 | printer.setPageSize(QPrinter::A4); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:39: /usr/include/qt5/QtPrintSupport/qprinter.h:177:10: note: declared here 177 | void setPageSize(PageSize) override; | ^~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:483:47: warning: 'void QPrinter::setOrientation(QPrinter::Orientation)' is deprecated: Use setPageOrientation() instead. [-Wdeprecated-declarations] 483 | printer.setOrientation(QPrinter::Landscape); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:39: /usr/include/qt5/QtPrintSupport/qprinter.h:172:10: note: declared here 172 | void setOrientation(Orientation); | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp: In member function 'virtual void Gui::View3DInventor::print(QPrinter*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:503:36: warning: 'QRect QPrinter::pageRect() const' is deprecated: Use pageLayout().paintRectPixels(resolution()) instead. [-Wdeprecated-declarations] 503 | QRect rect = printer->pageRect(); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.cpp:39: /usr/include/qt5/QtPrintSupport/qprinter.h:259:11: note: declared here 259 | QRect pageRect() const; | ^~~~~~~~ [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderGroupExtension.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderGroupExtension.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGroupExtension.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:104: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qeventloop.h:43, from /usr/include/qt5/QtCore/QEventLoop:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:78: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:104: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qeventloop.h:43, from /usr/include/qt5/QtCore/QEventLoop:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:78: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:104: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qeventloop.h:43, from /usr/include/qt5/QtCore/QEventLoop:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:78: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:104: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qeventloop.h:43, from /usr/include/qt5/QtCore/QEventLoop:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:78: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:104: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qeventloop.h:43, from /usr/include/qt5/QtCore/QEventLoop:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:78: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:104: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qeventloop.h:43, from /usr/include/qt5/QtCore/QEventLoop:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:78: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DViewerPy.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DViewerPy.cpp:36: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DViewerPy.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DViewerPy.cpp:36: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DViewerPy.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DViewerPy.cpp:36: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DViewerPy.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DViewerPy.cpp:36: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DViewerPy.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DViewerPy.cpp:36: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DViewerPy.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DViewerPy.cpp:36: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderGeoFeatureGroupExtension.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderGeoFeatureGroupExtension.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeoFeatureGroupExtension.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NaviCube.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qeventloop.h:43, from /usr/include/qt5/QtCore/QEventLoop:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NaviCube.cpp:77: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NaviCube.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qeventloop.h:43, from /usr/include/qt5/QtCore/QEventLoop:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NaviCube.cpp:77: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NaviCube.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qeventloop.h:43, from /usr/include/qt5/QtCore/QEventLoop:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NaviCube.cpp:77: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NaviCube.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qeventloop.h:43, from /usr/include/qt5/QtCore/QEventLoop:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NaviCube.cpp:77: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NaviCube.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qeventloop.h:43, from /usr/include/qt5/QtCore/QEventLoop:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NaviCube.cpp:77: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NaviCube.cpp:96: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qeventloop.h:43, from /usr/include/qt5/QtCore/QEventLoop:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NaviCube.cpp:77: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:101: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderExtension.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NaviCube.cpp:93: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:143: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qeventloop.h:43, from /usr/include/qt5/QtCore/QEventLoop:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:78: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DViewerPy.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp: In member function 'virtual bool Gui::ViewerEventFilter::eventFilter(QObject*, QEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:263:33: warning: 'Qt::Orientation QWheelEvent::orientation() const' is deprecated: Use angleDelta() [-Wdeprecated-declarations] 263 | if (we->orientation() == Qt::Horizontal) | ^ In file included from /usr/include/qt5/QtGui/QKeyEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:79: /usr/include/qt5/QtGui/qevent.h:222:28: note: declared here 222 | inline Qt::Orientation orientation() const { return qt4O; } | ^~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp: In constructor 'Gui::View3DInventorViewer::View3DInventorViewer(QWidget*, const QtGLWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:349:60: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 349 | allowredir(false), overrideMode("As Is"), _viewerPy(0) | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qeventloop.h:43, from /usr/include/qt5/QtCore/QEventLoop:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:78: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp: In constructor 'Gui::View3DInventorViewer::View3DInventorViewer(const QtGLFormat&, QWidget*, const QtGLWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:357:60: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 357 | allowredir(false), overrideMode("As Is"), _viewerPy(0) | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qeventloop.h:43, from /usr/include/qt5/QtCore/QEventLoop:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:78: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NaviCube.cpp:97: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qeventloop.h:43, from /usr/include/qt5/QtCore/QEventLoop:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NaviCube.cpp:77: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NaviCube.cpp:97: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qeventloop.h:43, from /usr/include/qt5/QtCore/QEventLoop:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/NaviCube.cpp:77: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp: In member function 'void Gui::View3DInventorViewer::drawAxisCross()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:2700:36: warning: implicitly-declared 'constexpr SbMatrix::SbMatrix(const SbMatrix&)' is deprecated [-Wdeprecated-copy] 2700 | SbMatrix comb = mx.multRight(px); | ^ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DPy.cpp:39: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/Coin4/Inventor/SbLinear.h:63, from /usr/include/Coin4/Inventor/SbBox.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.cpp:35: /usr/include/Coin4/Inventor/SbMatrix.h:113:14: note: because 'SbMatrix' has user-provided 'SbMatrix& SbMatrix::operator=(const SbMatrix&)' 113 | SbMatrix & operator =(const SbMatrix & m); | ^~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.cpp:47: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGroupExtension.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.cpp:53: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.cpp:47: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderOriginGroupExtension.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderOriginGroupExtension.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DPy.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DPy.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DPy.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DPy.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DPy.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DPy.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DPy.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DPy.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DPy.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DPy.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DPy.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DPy.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DPy.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DPy.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DPy.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DPy.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGroupExtension.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGroupExtension.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeoFeatureGroupExtension.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeoFeatureGroupExtension.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderAnnotation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderAnnotation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderAnnotation.cpp [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderDocumentObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderDocumentObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.cpp [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderDocumentObjectGroup.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderDocumentObjectGroup.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectGroup.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeoFeatureGroupExtension.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeoFeatureGroupExtension.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeoFeatureGroupExtension.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeoFeatureGroup.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderDocumentObjectPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderDocumentObjectPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectPyImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderAnnotation.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderAnnotation.cpp:49: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeoFeatureGroup.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeoFeatureGroup.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeoFeatureGroup.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeoFeatureGroup.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeoFeatureGroup.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeoFeatureGroup.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeoFeatureGroup.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeoFeatureGroup.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeoFeatureGroup.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroupExtension.cpp:30: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderDragger.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderDragger.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectGroup.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectGroup.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderAnnotation.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderAnnotation.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderExtern.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderExtern.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderExtern.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderAnnotation.cpp: In member function 'void Gui::ViewProviderAnnotationLabel::drawImage(const std::vector >&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderAnnotation.cpp:496:43: warning: 'int QFontMetrics::width(const QString&, int) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 496 | w = std::max(w, fm.width(line)); | ^ In file included from /usr/include/qt5/QtWidgets/qwidget.h:50, from /usr/include/qt5/QtWidgets/qaction.h:46, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderAnnotation.cpp:27: /usr/include/qt5/QtGui/qfontmetrics.h:106:9: note: declared here 106 | int width(const QString &, int len = -1) const; | ^~~~~ [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderFeature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderFeature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderFeature.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qrefcount.h:43, from /usr/include/qt5/QtCore/qbytearray.h:44, from /usr/include/qt5/QtCore/QByteArray:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskAppearance.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskAppearance.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.cpp:46: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectGroup.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectGroup.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectGroup.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectGroup.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectGroup.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectGroup.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectGroup.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectGroup.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectGroup.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectGroup.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectGroup.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectGroup.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectGroup.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectGroup.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectGroup.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectGroup.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderGeometryObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderGeometryObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.cpp [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderInventorObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderInventorObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderInventorObject.cpp [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderMeasureDistance.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderMeasureDistance.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderMeasureDistance.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectPyImp.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.cpp:48: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPyImp.cpp [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderPythonFeature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderPythonFeature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPythonFeature.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderFeature.cpp:37: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectPyImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectPyImp.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectPyImp.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ViewProviderDocumentObjectPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ViewProviderDocumentObjectPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderFeature.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderFeature.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderFeature.cpp:40: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderFeature.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderFeature.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderFeature.cpp:40: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderFeature.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderFeature.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderFeature.cpp:40: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderFeature.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderFeature.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderFeature.cpp:40: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderFeature.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderFeature.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderFeature.cpp:40: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderFeature.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderFeature.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderFeature.cpp:40: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 69%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderVRMLObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderVRMLObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderVRMLObject.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.cpp:48: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderInventorObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderInventorObject.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderBuilder.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderBuilder.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderBuilder.cpp [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderPlacement.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderPlacement.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPlacement.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPythonFeature.cpp:33: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPyImp.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.h:115:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 115 | DlgPreferencesImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qrefcount.h:43, from /usr/include/qt5/QtCore/qbytearray.h:44, from /usr/include/qt5/QtCore/QByteArray:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPyImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPyImp.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.h:54:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 54 | DlgCustomizeImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qrefcount.h:43, from /usr/include/qt5/QtCore/qbytearray.h:44, from /usr/include/qt5/QtCore/QByteArray:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPyImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderMeasureDistance.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderMeasureDistance.cpp:44: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPyImp.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ViewProviderPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ViewProviderPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.cpp:53: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPyImp.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderOriginFeature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderOriginFeature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginFeature.cpp /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderMeasureDistance.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderMeasureDistance.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderPlane.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderPlane.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPlane.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderMeasureDistance.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderMeasureDistance.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderMeasureDistance.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderMeasureDistance.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderMeasureDistance.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderMeasureDistance.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderMeasureDistance.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderMeasureDistance.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderMeasureDistance.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderMeasureDistance.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderMeasureDistance.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderMeasureDistance.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderLine.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderLine.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderLine.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPythonFeature.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPythonFeature.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPythonFeature.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.h:115:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 115 | DlgPreferencesImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPythonFeature.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPythonFeature.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.h:54:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 54 | DlgCustomizeImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPythonFeature.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderVRMLObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderVRMLObject.cpp:47: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderGeoFeatureGroup.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderGeoFeatureGroup.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeoFeatureGroup.cpp [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderOriginGroup.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderOriginGroup.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroup.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPlacement.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPlacement.cpp:46: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginFeature.cpp:40: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPlacement.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPlacement.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroup.cpp:28: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPlacement.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPlacement.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPlacement.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPlacement.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPlacement.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPlacement.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPlacement.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPlacement.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPlacement.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPlacement.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPlacement.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPlacement.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderPart.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderPart.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPart.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOrigin.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPlane.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOrigin.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderLine.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeoFeatureGroup.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderOrigin.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderOrigin.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOrigin.cpp [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderMaterialObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderMaterialObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderMaterialObject.cpp /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ViewProviderTextDocument.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ViewProviderTextDocument.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderTextDocument.cpp [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/FileDialog.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -DUSE_QT_FILEDIALOG -o CMakeFiles/FreeCADGui.dir/FileDialog.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPart.cpp:30: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/MainWindow.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/MainWindow.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroup.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtension.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroup.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroup.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtension.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroup.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroup.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtension.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroup.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroup.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtension.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroup.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroup.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtension.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroup.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroup.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtension.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroup.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroup.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtension.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroup.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroup.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtension.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOriginGroup.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/PrefWidgets.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/PrefWidgets.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOrigin.cpp:32: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp: In static member function 'static QString Gui::FileDialog::getSaveFileName(QWidget*, const QString&, const QString&, const QString&, QString*, QFileDialog::Options)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:205:45: warning: 'void QFileDialog::setNameFilterDetailsVisible(bool)' is deprecated: Use setOption(HideNameFilterDetails, !enabled) instead [-Wdeprecated-declarations] 205 | dlg.setNameFilterDetailsVisible(true); | ^ In file included from /usr/include/qt5/QtWidgets/QFileDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:45: /usr/include/qt5/QtWidgets/qfiledialog.h:129:10: note: declared here 129 | void setNameFilterDetailsVisible(bool enabled); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:206:37: warning: 'void QFileDialog::setConfirmOverwrite(bool)' is deprecated: Use setOption(DontConfirmOverwrite, !enabled) instead [-Wdeprecated-declarations] 206 | dlg.setConfirmOverwrite(true); | ^ In file included from /usr/include/qt5/QtWidgets/QFileDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:45: /usr/include/qt5/QtWidgets/qfiledialog.h:177:10: note: declared here 177 | void setConfirmOverwrite(bool enabled); | ^~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:224:25: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 224 | return QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:224:25: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 224 | return QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp: In static member function 'static QString Gui::FileDialog::getOpenFileName(QWidget*, const QString&, const QString&, const QString&, QString*, QFileDialog::Options)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:299:45: warning: 'void QFileDialog::setNameFilterDetailsVisible(bool)' is deprecated: Use setOption(HideNameFilterDetails, !enabled) instead [-Wdeprecated-declarations] 299 | dlg.setNameFilterDetailsVisible(true); | ^ In file included from /usr/include/qt5/QtWidgets/QFileDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:45: /usr/include/qt5/QtWidgets/qfiledialog.h:129:10: note: declared here 129 | void setNameFilterDetailsVisible(bool enabled); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:319:25: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 319 | return QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:319:25: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 319 | return QString::null; | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp: In static member function 'static QStringList Gui::FileDialog::getOpenFileNames(QWidget*, const QString&, const QString&, const QString&, QString*, QFileDialog::Options)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:375:45: warning: 'void QFileDialog::setNameFilterDetailsVisible(bool)' is deprecated: Use setOption(HideNameFilterDetails, !enabled) instead [-Wdeprecated-declarations] 375 | dlg.setNameFilterDetailsVisible(true); | ^ In file included from /usr/include/qt5/QtWidgets/QFileDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:45: /usr/include/qt5/QtWidgets/qfiledialog.h:129:10: note: declared here 129 | void setNameFilterDetailsVisible(bool enabled); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp: In member function 'void Gui::FileOptionsDialog::toggleExtension()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:548:28: warning: 'QWidget* QDialog::extension() const' is deprecated: Use show/hide on the affected widget instead [-Wdeprecated-declarations] 548 | QWidget* w = extension(); | ^ In file included from /usr/include/qt5/QtWidgets/qfiledialog.h:47, from /usr/include/qt5/QtWidgets/QFileDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:45: /usr/include/qt5/QtWidgets/qdialog.h:76:78: note: declared here 76 | QT_DEPRECATED_X("Use show/hide on the affected widget instead") QWidget* extension() const; | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:550:38: warning: 'void QDialog::showExtension(bool)' is deprecated: Use show/hide on the affected widget instead [-Wdeprecated-declarations] 550 | showExtension(!w->isVisible()); | ^ In file included from /usr/include/qt5/QtWidgets/qfiledialog.h:47, from /usr/include/qt5/QtWidgets/QFileDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:45: /usr/include/qt5/QtWidgets/qdialog.h:101:74: note: declared here 101 | QT_DEPRECATED_X("Use show/hide on the affected widget instead") void showExtension(bool); | ^~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp: In member function 'void Gui::FileOptionsDialog::setOptionsWidget(Gui::FileOptionsDialog::ExtensionPosition, QWidget*, bool)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:556:23: warning: 'void QDialog::setExtension(QWidget*)' is deprecated: Use show/hide on the affected widget instead [-Wdeprecated-declarations] 556 | setExtension(w); | ^ In file included from /usr/include/qt5/QtWidgets/qfiledialog.h:47, from /usr/include/qt5/QtWidgets/QFileDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:45: /usr/include/qt5/QtWidgets/qdialog.h:75:74: note: declared here 75 | QT_DEPRECATED_X("Use show/hide on the affected widget instead") void setExtension(QWidget* extension); | ^~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:557:38: warning: 'void QDialog::setOrientation(Qt::Orientation)' is deprecated: Use show/hide on the affected widget instead [-Wdeprecated-declarations] 557 | setOrientation(Qt::Horizontal); | ^ In file included from /usr/include/qt5/QtWidgets/qfiledialog.h:47, from /usr/include/qt5/QtWidgets/QFileDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:45: /usr/include/qt5/QtWidgets/qdialog.h:73:74: note: declared here 73 | QT_DEPRECATED_X("Use show/hide on the affected widget instead") void setOrientation(Qt::Orientation orientation); | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:560:23: warning: 'void QDialog::setExtension(QWidget*)' is deprecated: Use show/hide on the affected widget instead [-Wdeprecated-declarations] 560 | setExtension(w); | ^ In file included from /usr/include/qt5/QtWidgets/qfiledialog.h:47, from /usr/include/qt5/QtWidgets/QFileDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:45: /usr/include/qt5/QtWidgets/qdialog.h:75:74: note: declared here 75 | QT_DEPRECATED_X("Use show/hide on the affected widget instead") void setExtension(QWidget* extension); | ^~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:561:36: warning: 'void QDialog::setOrientation(Qt::Orientation)' is deprecated: Use show/hide on the affected widget instead [-Wdeprecated-declarations] 561 | setOrientation(Qt::Vertical); | ^ In file included from /usr/include/qt5/QtWidgets/qfiledialog.h:47, from /usr/include/qt5/QtWidgets/QFileDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:45: /usr/include/qt5/QtWidgets/qdialog.h:73:74: note: declared here 73 | QT_DEPRECATED_X("Use show/hide on the affected widget instead") void setOrientation(Qt::Orientation orientation); | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp: In member function 'QWidget* Gui::FileOptionsDialog::getOptionsWidget() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:571:28: warning: 'QWidget* QDialog::extension() const' is deprecated: Use show/hide on the affected widget instead [-Wdeprecated-declarations] 571 | return this->extension(); | ^ In file included from /usr/include/qt5/QtWidgets/qfiledialog.h:47, from /usr/include/qt5/QtWidgets/QFileDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:45: /usr/include/qt5/QtWidgets/qdialog.h:76:78: note: declared here 76 | QT_DEPRECATED_X("Use show/hide on the affected widget instead") QWidget* extension() const; | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp: In constructor 'Gui::FileChooser::FileChooser(QWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:622:52: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 622 | : QWidget(parent), md( File ), _filter( QString::null ) | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:622:52: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 622 | : QWidget(parent), md( File ), _filter( QString::null ) | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp: In member function 'virtual void Gui::FileChooser::setButtonText(const QString&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:776:47: warning: 'int QFontMetrics::width(const QString&, int) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 776 | int w1 = 2*button->fontMetrics().width(txt); | ^ In file included from /usr/include/qt5/QtWidgets/qwidget.h:50, from /usr/include/qt5/QtWidgets/qcombobox.h:44, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:29: /usr/include/qt5/QtGui/qfontmetrics.h:106:9: note: declared here 106 | int width(const QString &, int len = -1) const; | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:777:66: warning: 'int QFontMetrics::width(const QString&, int) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 777 | int w2 = 2*button->fontMetrics().width(QLatin1String(" ... ")); | ^ In file included from /usr/include/qt5/QtWidgets/qwidget.h:50, from /usr/include/qt5/QtWidgets/qcombobox.h:44, from /usr/include/qt5/QtWidgets/QComboBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.cpp:29: /usr/include/qt5/QtGui/qfontmetrics.h:106:9: note: declared here 106 | int width(const QString &, int len = -1) const; | ^~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectGroup.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderMaterialObject.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderTextDocument.cpp:29: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/InputField.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/InputField.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:54: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPart.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPart.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderMaterialObject.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderMaterialObject.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOrigin.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOrigin.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOrigin.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOrigin.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOrigin.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOrigin.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOrigin.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOrigin.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOrigin.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOrigin.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ProgressBar.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ProgressBar.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOrigin.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOrigin.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOrigin.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOrigin.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOrigin.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderOrigin.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TextDocumentEditorView.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderTextDocument.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderTextDocument.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/QuantitySpinBox.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/QuantitySpinBox.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QuantitySpinBox.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:89: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.h:115:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 115 | DlgPreferencesImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:89: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.h:54:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 54 | DlgCustomizeImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:91: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:91: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.h:45:78: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 45 | SplashScreen( const QPixmap & pixmap = QPixmap ( ), Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:101: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:39: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SpinBox.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SpinBox.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SpinBox.cpp [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Splashscreen.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Splashscreen.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp: In member function 'virtual void Gui::Sequencer::startStep()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp:135:31: warning: 'void QTime::start()' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 135 | d->progressTime.start(); | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp:33: /usr/include/qt5/QtCore/qdatetime.h:235:55: note: declared here 235 | QT_DEPRECATED_X("Use QElapsedTimer instead") void start(); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp:136:30: warning: 'void QTime::start()' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 136 | d->measureTime.start(); | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp:33: /usr/include/qt5/QtCore/qdatetime.h:235:55: note: declared here 235 | QT_DEPRECATED_X("Use QElapsedTimer instead") void start(); | ^~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/WidgetFactory.cpp.o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp:142:31: warning: 'void QTime::start()' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 142 | d->progressTime.start(); | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp:33: /usr/include/qt5/QtCore/qdatetime.h:235:55: note: declared here 235 | QT_DEPRECATED_X("Use QElapsedTimer instead") void start(); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp:143:30: warning: 'void QTime::start()' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 143 | d->measureTime.start(); | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp:33: /usr/include/qt5/QtCore/qdatetime.h:235:55: note: declared here 235 | QT_DEPRECATED_X("Use QElapsedTimer instead") void start(); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp: In member function 'void Gui::Sequencer::setValue(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp:191:47: warning: 'int QTime::elapsed() const' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 191 | int elapsed = d->progressTime.elapsed(); | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp:33: /usr/include/qt5/QtCore/qdatetime.h:237:54: note: declared here 237 | QT_DEPRECATED_X("Use QElapsedTimer instead") int elapsed() const; | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp:194:37: warning: 'int QTime::restart()' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 194 | d->progressTime.restart(); | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp:33: /usr/include/qt5/QtCore/qdatetime.h:236:54: note: declared here 236 | QT_DEPRECATED_X("Use QElapsedTimer instead") int restart(); | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp:206:47: warning: 'int QTime::elapsed() const' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 206 | int elapsed = d->progressTime.elapsed(); | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp:33: /usr/include/qt5/QtCore/qdatetime.h:237:54: note: declared here 237 | QT_DEPRECATED_X("Use QElapsedTimer instead") int elapsed() const; | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp:209:37: warning: 'int QTime::restart()' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 209 | d->progressTime.restart(); | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp:33: /usr/include/qt5/QtCore/qdatetime.h:236:54: note: declared here 236 | QT_DEPRECATED_X("Use QElapsedTimer instead") int restart(); | ^~~~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/WidgetFactory.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp: In member function 'void Gui::Sequencer::showRemainingTime()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp:232:42: warning: 'int QTime::elapsed() const' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 232 | int elapsed = d->measureTime.elapsed(); | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ProgressBar.cpp:33: /usr/include/qt5/QtCore/qdatetime.h:237:54: note: declared here 237 | QT_DEPRECATED_X("Use QElapsedTimer instead") int elapsed() const; | ^~~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Widgets.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Widgets.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgOnlineHelp.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:105: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgOnlineHelp.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:105: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgOnlineHelp.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:105: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgOnlineHelp.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:105: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgOnlineHelp.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:105: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:115: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:116: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:116: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:116: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:116: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:116: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:116: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp: In member function 'void Gui::MainWindow::loadWindowSettings()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:1155:61: warning: 'const QRect QDesktopWidget::availableGeometry(int) const' is deprecated: Use QGuiApplication::screens() [-Wdeprecated-declarations] 1155 | QRect rect = QApplication::desktop()->availableGeometry(); | ^ In file included from /usr/include/qt5/QtWidgets/QDesktopWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:35: /usr/include/qt5/QtWidgets/qdesktopwidget.h:88:67: note: declared here 88 | QT_DEPRECATED_X("Use QGuiApplication::screens()") const QRect availableGeometry(int screen = -1) const; | ^~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp: In member function 'void Gui::MainWindow::startSplasher()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:1219:67: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 1219 | d->splashscreen = new SplashScreen(this->splashImage()); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp: In member function 'QPixmap Gui::MainWindow::splashImage() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:1294:38: warning: 'int QFontMetrics::width(const QString&, int) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 1294 | int l = metricExe.width(title); | ^ In file included from /usr/include/qt5/QtWidgets/qwidget.h:50, from /usr/include/qt5/QtWidgets/qdesktopwidget.h:44, from /usr/include/qt5/QtWidgets/QDesktopWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:35: /usr/include/qt5/QtGui/qfontmetrics.h:106:9: note: declared here 106 | int width(const QString &, int len = -1) const; | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:1301:40: warning: 'int QFontMetrics::width(const QString&, int) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 1301 | int v = metricVer.width(version); | ^ In file included from /usr/include/qt5/QtWidgets/qwidget.h:50, from /usr/include/qt5/QtWidgets/qdesktopwidget.h:44, from /usr/include/qt5/QtWidgets/QDesktopWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:35: /usr/include/qt5/QtGui/qfontmetrics.h:106:9: note: declared here 106 | int width(const QString &, int len = -1) const; | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp: In member function 'void Gui::MainWindow::loadUrls(App::Document*, const QList&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:1544:44: warning: 'QString QFileInfo::readLink() const' is deprecated: Use QFileInfo::symLinkTarget() instead [-Wdeprecated-declarations] 1544 | info.setFile(info.readLink()); | ^ In file included from /usr/include/qt5/QtCore/qdir.h:44, from /usr/include/qt5/QtWidgets/qfiledialog.h:44, from /usr/include/qt5/QtWidgets/QFileDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgOnlineHelp.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgOnlineHelpImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MainWindow.cpp:105: /usr/include/qt5/QtCore/qfileinfo.h:122:13: note: declared here 122 | QString readLink() const; | ^~~~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Window.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Window.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Window.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.cpp: In member function 'QPixmap Gui::InputField::getValidationIcon(const char*, const QSize&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.cpp:147:37: warning: 'static bool QPixmapCache::find(const QString&, QPixmap&)' is deprecated: Use bool find(const QString &, QPixmap *) instead [-Wdeprecated-declarations] 147 | if (QPixmapCache::find(key, icon)) | ^ In file included from /usr/include/qt5/QtGui/QPixmapCache:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.cpp:28: /usr/include/qt5/QtGui/qpixmapcache.h:81:17: note: declared here 81 | static bool find(const QString &key, QPixmap &pixmap); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.cpp: In member function 'virtual void Gui::InputField::wheelEvent(QWheelEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.cpp:694:32: warning: 'int QWheelEvent::delta() const' is deprecated: Use angleDelta() [-Wdeprecated-declarations] 694 | double step = event->delta() > 0 ? StepSize : -StepSize; | ^ In file included from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.cpp:26: /usr/include/qt5/QtGui/qevent.h:219:16: note: declared here 219 | inline int delta() const { return qt4D; } | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QuantitySpinBox.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qalgorithms.h:43, from /usr/include/qt5/QtCore/qdebug.h:44, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QuantitySpinBox.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QuantitySpinBox.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qalgorithms.h:43, from /usr/include/qt5/QtCore/qdebug.h:44, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QuantitySpinBox.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QuantitySpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QuantitySpinBox.cpp:38: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/MDIView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/MDIView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/GraphvizView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/GraphvizView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ActiveObjectList.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ActiveObjectList.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp: In member function 'virtual void Gui::CommandIconView::startDrag(Qt::DropActions)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:96:31: warning: 'Qt::DropAction QDrag::start(Qt::DropActions)' is deprecated: Use QDrag::exec() instead [-Wdeprecated-declarations] 96 | drag->start(Qt::MoveAction); | ^ In file included from /usr/include/qt5/QtGui/QDrag:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:30: /usr/include/qt5/QtGui/qdrag.h:79:20: note: declared here 79 | Qt::DropAction start(Qt::DropActions supportedActions = Qt::CopyAction); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp: In member function 'void Gui::ActionSelector::on_upButton_clicked()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:334:52: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 334 | if (item && selectedWidget->isItemSelected(item)) { | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgTreeWidget.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:46: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp: In member function 'void Gui::ActionSelector::on_downButton_clicked()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:347:52: warning: 'bool QTreeWidget::isItemSelected(const QTreeWidgetItem*) const' is deprecated: Use QTreeWidgetItem::isSelected() instead [-Wdeprecated-declarations] 347 | if (item && selectedWidget->isItemSelected(item)) { | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_DlgTreeWidget.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:46: /usr/include/qt5/QtWidgets/qtreewidget.h:320:10: note: declared here 320 | bool isItemSelected(const QTreeWidgetItem *item) const; | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp: In member function 'virtual void Gui::ToolTip::timerEvent(QTimerEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:991:29: warning: 'int QTime::restart()' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 991 | displayTime.restart(); | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:46: /usr/include/qt5/QtCore/qdatetime.h:236:54: note: declared here 236 | QT_DEPRECATED_X("Use QElapsedTimer instead") int restart(); | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp: In member function 'virtual bool Gui::ToolTip::eventFilter(QObject*, QEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:1012:54: warning: 'int QTime::elapsed() const' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 1012 | !this->hidden && displayTime.elapsed() < 5000) { | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:46: /usr/include/qt5/QtCore/qdatetime.h:237:54: note: declared here 237 | QT_DEPRECATED_X("Use QElapsedTimer instead") int elapsed() const; | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp: In member function 'void Gui::StatusWidget::adjustPosition(QWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:1079:58: warning: 'bool QDesktopWidget::isVirtualDesktop() const' is deprecated: Use QScreen::virtualSiblings() of primary screen [-Wdeprecated-declarations] 1079 | } else if (QApplication::desktop()->isVirtualDesktop()) { | ^ In file included from /usr/include/qt5/QtWidgets/QDesktopWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:28: /usr/include/qt5/QtWidgets/qdesktopwidget.h:69:79: note: declared here 69 | QT_DEPRECATED_X("Use QScreen::virtualSiblings() of primary screen") bool isVirtualDesktop() const; | ^~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:1080:68: warning: 'int QDesktopWidget::screenNumber(const QPoint&) const' is deprecated: Use QGuiApplication::screenAt() [-Wdeprecated-declarations] 1080 | scrn = QApplication::desktop()->screenNumber(QCursor::pos()); | ^ In file included from /usr/include/qt5/QtWidgets/QDesktopWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:28: /usr/include/qt5/QtWidgets/qdesktopwidget.h:75:60: note: declared here 75 | QT_DEPRECATED_X("Use QGuiApplication::screenAt()") int screenNumber(const QPoint &) const; | ^~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:1084:59: warning: 'const QRect QDesktopWidget::availableGeometry(int) const' is deprecated: Use QGuiApplication::screens() [-Wdeprecated-declarations] 1084 | desk = QApplication::desktop()->availableGeometry(scrn); | ^ In file included from /usr/include/qt5/QtWidgets/QDesktopWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:28: /usr/include/qt5/QtWidgets/qdesktopwidget.h:88:67: note: declared here 88 | QT_DEPRECATED_X("Use QGuiApplication::screens()") const QRect availableGeometry(int screen = -1) const; | ^~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp: In member function 'int Gui::PropertyListEditor::lineNumberAreaWidth()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:1181:57: warning: 'int QFontMetrics::width(QChar) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 1181 | int space = 3 + fontMetrics().width(QLatin1Char('9')) * digits; | ^ In file included from /usr/include/qt5/QtWidgets/qwidget.h:50, from /usr/include/qt5/QtWidgets/qaction.h:46, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:26: /usr/include/qt5/QtGui/qfontmetrics.h:110:9: note: declared here 110 | int width(QChar) const; | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp: In member function 'virtual void Gui::LabelEditor::setButtonText(const QString&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:1388:47: warning: 'int QFontMetrics::width(const QString&, int) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 1388 | int w1 = 2*button->fontMetrics().width(txt); | ^ In file included from /usr/include/qt5/QtWidgets/qwidget.h:50, from /usr/include/qt5/QtWidgets/qaction.h:46, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:26: /usr/include/qt5/QtGui/qfontmetrics.h:106:9: note: declared here 106 | int width(const QString &, int len = -1) const; | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:1389:66: warning: 'int QFontMetrics::width(const QString&, int) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 1389 | int w2 = 2*button->fontMetrics().width(QLatin1String(" ... ")); | ^ In file included from /usr/include/qt5/QtWidgets/qwidget.h:50, from /usr/include/qt5/QtWidgets/qaction.h:46, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.cpp:26: /usr/include/qt5/QtGui/qfontmetrics.h:106:9: note: declared here 106 | int width(const QString &, int len = -1) const; | ^~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:49: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.cpp:27: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.h:45:78: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 45 | SplashScreen( const QPixmap & pixmap = QPixmap ( ), Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_AboutApplication.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_AboutApplication.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_AboutApplication.h: In member function 'void Gui::Dialog::Ui_AboutApplication::setupUi(QDialog*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/ui_AboutApplication.h:136:50: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 136 | labelAuthor = new Gui::UrlLabel(tab_about); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp: In member function 'virtual void Gui::Dialog::AboutDialog::on_copyButton_clicked()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:727:58: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 727 | str << "OS: " << SystemInfo::getOperatingSystem() << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:727:58: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 727 | str << "OS: " << SystemInfo::getOperatingSystem() << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:730:61: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 730 | str << "Word size of OS: " << wordSize << "-bit" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:730:61: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 730 | str << "Word size of OS: " << wordSize << "-bit" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:732:78: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 732 | str << "Word size of " << exe << ": " << QSysInfo::WordSize << "-bit" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:732:78: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 732 | str << "Word size of " << exe << ": " << QSysInfo::WordSize << "-bit" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:737:12: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 737 | str << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:737:12: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 737 | str << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:742:37: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 742 | str << "Build type: Release" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:742:37: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 742 | str << "Build type: Release" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:750:71: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 750 | str << "Branch: " << QString::fromUtf8(it->second.c_str()) << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:750:71: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 750 | str << "Branch: " << QString::fromUtf8(it->second.c_str()) << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:753:50: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 753 | str << "Hash: " << it->second.c_str() << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:753:50: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 753 | str << "Hash: " << it->second.c_str() << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:755:48: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 755 | str << "Python version: " << PY_VERSION << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:755:48: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 755 | str << "Python version: " << PY_VERSION << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:756:48: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 756 | str << "Qt version: " << QT_VERSION_STR << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:756:48: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 756 | str << "Qt version: " << QT_VERSION_STR << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:757:48: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 757 | str << "Coin version: " << COIN_VERSION << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:757:48: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 757 | str << "Coin version: " << COIN_VERSION << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:766:12: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 766 | << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:766:12: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 766 | << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:771:41: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 771 | << " (" << loc.name() << ")" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:771:41: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 771 | << " (" << loc.name() << ")" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:36: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp: In constructor 'Gui::Dialog::LicenseView::LicenseView(QWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:782:25: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 782 | : MDIView(0,parent,0) | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Splashscreen.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.cpp:110: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.h:115:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 115 | DlgPreferencesImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qtextstream.h:43, from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.cpp:110: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.h:54:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 54 | DlgCustomizeImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qtextstream.h:43, from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.cpp:111: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qtextstream.h:43, from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.cpp:111: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qtextstream.h:43, from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.cpp:111: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qtextstream.h:43, from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.cpp:111: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qtextstream.h:43, from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.cpp:111: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qtextstream.h:43, from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/DockWindowManager.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/DockWindowManager.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DockWindowManager.cpp [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/MenuManager.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/MenuManager.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MenuManager.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:40: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/PythonWorkbenchPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/PythonWorkbenchPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonWorkbenchPyImp.cpp /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ToolBarManager.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ToolBarManager.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ToolBarManager.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:40: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DockWindowManager.cpp: In member function 'QDockWidget* Gui::DockWindowManager::addDockWindow(const char*, QWidget*, Qt::DockWidgetArea)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DockWindowManager.cpp:157:37: warning: 'static QString QDockWidget::trUtf8(const char*, const char*, int)' is deprecated [-Wdeprecated-declarations] 157 | dw->setWindowTitle(QDockWidget::trUtf8(name)); | ^~~~~~ In file included from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qsharedpointer_impl.h:65, from /usr/include/qt5/QtCore/qsharedpointer.h:48, from /usr/include/qt5/QtCore/qpointer.h:43, from /usr/include/qt5/QtCore/QPointer:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DockWindowManager.cpp:26: /usr/include/qt5/QtWidgets/qdockwidget.h:57:5: note: declared here 57 | Q_OBJECT | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DockWindowManager.cpp:157:48: warning: 'static QString QDockWidget::trUtf8(const char*, const char*, int)' is deprecated [-Wdeprecated-declarations] 157 | dw->setWindowTitle(QDockWidget::trUtf8(name)); | ^ In file included from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qsharedpointer_impl.h:65, from /usr/include/qt5/QtCore/qsharedpointer.h:48, from /usr/include/qt5/QtCore/qpointer.h:43, from /usr/include/qt5/QtCore/QPointer:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DockWindowManager.cpp:26: /usr/include/qt5/QtWidgets/qdockwidget.h:57:5: note: declared here 57 | Q_OBJECT | ^~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp: In constructor 'Gui::GraphvizView::GraphvizView(App::Document&, QWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:155:15: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 155 | , nPending(0) | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp: In member function 'virtual bool Gui::GraphvizView::onMsg(const char*, const char**)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:393:141: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 393 | QString fn = Gui::FileDialog::getSaveFileName(this, tr("Export graph"), QString(), filter.join(QLatin1String(";;")), &selectedFilter); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp: In member function 'virtual void Gui::GraphvizView::print(QPrinter*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:447:36: warning: 'QRect QPrinter::pageRect() const' is deprecated: Use pageLayout().paintRectPixels(resolution()) instead. [-Wdeprecated-declarations] 447 | QRect rect = printer->pageRect(); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:29: /usr/include/qt5/QtPrintSupport/qprinter.h:259:11: note: declared here 259 | QRect pageRect() const; | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp: In member function 'virtual void Gui::GraphvizView::print()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:459:47: warning: 'void QPrinter::setOrientation(QPrinter::Orientation)' is deprecated: Use setPageOrientation() instead. [-Wdeprecated-declarations] 459 | printer.setOrientation(QPrinter::Landscape); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:29: /usr/include/qt5/QtPrintSupport/qprinter.h:172:10: note: declared here 172 | void setOrientation(Orientation); | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp: In member function 'virtual void Gui::GraphvizView::printPdf()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:472:137: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 472 | QString fn = Gui::FileDialog::getSaveFileName(this, tr("Export graph"), QString(), filter.join(QLatin1String(";;")), &selectedFilter); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp: In member function 'virtual void Gui::GraphvizView::printPreview()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:489:47: warning: 'void QPrinter::setOrientation(QPrinter::Orientation)' is deprecated: Use setPageOrientation() instead. [-Wdeprecated-declarations] 489 | printer.setOrientation(QPrinter::Landscape); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/GraphvizView.cpp:29: /usr/include/qt5/QtPrintSupport/qprinter.h:172:10: note: declared here 172 | void setOrientation(Orientation); | ^~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qtreewidget.h:43, from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/ToolBoxManager.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/ToolBoxManager.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ToolBoxManager.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonWorkbenchPyImp.cpp:26: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Workbench.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Workbench.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.cpp [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/WorkbenchFactory.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/WorkbenchFactory.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WorkbenchFactory.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PythonWorkbenchPyImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/PythonWorkbenchPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/PythonWorkbenchPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 70%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/WorkbenchManager.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/WorkbenchManager.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WorkbenchManager.cpp [ 71%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/WorkbenchPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/WorkbenchPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WorkbenchPyImp.cpp [ 71%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SelectionObjectPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SelectionObjectPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SelectionObjectPyImp.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ToolBoxManager.cpp: In member function 'void Gui::ToolBoxManager::setup(Gui::ToolBarItem*) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ToolBoxManager.cpp:93:38: warning: 'static QString QObject::trUtf8(const char*, const char*, int)' is deprecated [-Wdeprecated-declarations] 93 | bar->setWindowTitle(QObject::trUtf8(toolbarName.c_str())); // i18n | ^~~~~~ In file included from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qcoreapplication.h:46, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ToolBoxManager.cpp:26: /usr/include/qt5/QtCore/qobject.h:129:5: note: declared here 129 | Q_OBJECT | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ToolBoxManager.cpp:93:64: warning: 'static QString QObject::trUtf8(const char*, const char*, int)' is deprecated [-Wdeprecated-declarations] 93 | bar->setWindowTitle(QObject::trUtf8(toolbarName.c_str())); // i18n | ^ In file included from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qcoreapplication.h:46, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ToolBoxManager.cpp:26: /usr/include/qt5/QtCore/qobject.h:129:5: note: declared here 129 | Q_OBJECT | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ToolBoxManager.cpp: In member function 'void Gui::ToolBoxManager::retranslate() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ToolBoxManager.cpp:132:36: warning: 'static QString QObject::trUtf8(const char*, const char*, int)' is deprecated [-Wdeprecated-declarations] 132 | w->setWindowTitle(QObject::trUtf8(toolbarName.constData())); | ^~~~~~ In file included from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qcoreapplication.h:46, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ToolBoxManager.cpp:26: /usr/include/qt5/QtCore/qobject.h:129:5: note: declared here 129 | Q_OBJECT | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ToolBoxManager.cpp:132:66: warning: 'static QString QObject::trUtf8(const char*, const char*, int)' is deprecated [-Wdeprecated-declarations] 132 | w->setWindowTitle(QObject::trUtf8(toolbarName.constData())); | ^ In file included from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qcoreapplication.h:46, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ToolBoxManager.cpp:26: /usr/include/qt5/QtCore/qobject.h:129:5: note: declared here 129 | Q_OBJECT | ^~~~~~~~ [ 71%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SelectionObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SelectionObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SelectionObject.cpp [ 71%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Selection.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/Selection.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.cpp [ 71%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SelectionFilter.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/SelectionFilter.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SelectionFilter.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.cpp:29: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WorkbenchManager.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.cpp:45: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WorkbenchFactory.cpp:27: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SelectionObjectPyImp.cpp:26: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WorkbenchPyImp.cpp:26: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SelectionObject.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 71%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DBUILD_ADDONMGR -DCMAKE_BUILD_TYPE=\"RelWithDebInfo\" -DFreeCADGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_PYSIDE2 -DHAVE_SHIBOKEN2 -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSPNAV_FOUND -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/.. -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Language -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/propertyeditor -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/TaskView -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/Quarter -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/DAGView -I/usr/include/eigen3 -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/shiboken2 -I/usr/include/PySide2 -I/usr/include/PySide2/QtCore -I/usr/include/PySide2/QtGui -I/usr/include/PySide2/QtWidgets -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtXml -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PreCompiled.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SelectionFilter.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WorkbenchPyImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/WorkbenchPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/WorkbenchPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SelectionObjectPyImp.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/SelectionObjectPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui/SelectionObjectPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 71%] Linking CXX shared library ../../lib/libFreeCADGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/FreeCADGui.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,libFreeCADGui.so -o ../../lib/libFreeCADGui.so CMakeFiles/FreeCADGui.dir/Application.cpp.o CMakeFiles/FreeCADGui.dir/ApplicationPy.cpp.o CMakeFiles/FreeCADGui.dir/AutoSaver.cpp.o CMakeFiles/FreeCADGui.dir/BitmapFactory.cpp.o CMakeFiles/FreeCADGui.dir/Document.cpp.o CMakeFiles/FreeCADGui.dir/DocumentModel.cpp.o CMakeFiles/FreeCADGui.dir/DocumentPyImp.cpp.o CMakeFiles/FreeCADGui.dir/DocumentObserver.cpp.o CMakeFiles/FreeCADGui.dir/DocumentObserverPython.cpp.o CMakeFiles/FreeCADGui.dir/ExpressionBinding.cpp.o CMakeFiles/FreeCADGui.dir/GraphicsViewZoom.cpp.o CMakeFiles/FreeCADGui.dir/ExpressionCompleter.cpp.o CMakeFiles/FreeCADGui.dir/GuiApplication.cpp.o CMakeFiles/FreeCADGui.dir/GuiApplicationNativeEventAware.cpp.o CMakeFiles/FreeCADGui.dir/GuiConsole.cpp.o CMakeFiles/FreeCADGui.dir/Macro.cpp.o CMakeFiles/FreeCADGui.dir/MergeDocuments.cpp.o CMakeFiles/FreeCADGui.dir/resource.cpp.o CMakeFiles/FreeCADGui.dir/Control.cpp.o CMakeFiles/FreeCADGui.dir/SpaceballEvent.cpp.o CMakeFiles/FreeCADGui.dir/Thumbnail.cpp.o CMakeFiles/FreeCADGui.dir/Utilities.cpp.o CMakeFiles/FreeCADGui.dir/WaitCursor.cpp.o CMakeFiles/FreeCADGui.dir/ManualAlignment.cpp.o CMakeFiles/FreeCADGui.dir/TransactionObject.cpp.o CMakeFiles/FreeCADGui.dir/WinNativeGestureRecognizers.cpp.o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/moc_iisiconlabel.cpp.o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/moc_iistaskbox.cpp.o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/moc_iistaskgroup.cpp.o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/moc_iistaskheader.cpp.o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/moc_actionbox.cpp.o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/moc_actionlabel.cpp.o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/moc_actiongroup.cpp.o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/moc_actionpanel.cpp.o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/moc_taskheader_p.cpp.o CMakeFiles/FreeCADGui.dir/qrc_resource.cpp.o CMakeFiles/FreeCADGui.dir/qrc_translation.cpp.o CMakeFiles/FreeCADGui.dir/qrc_iisTaskPanel.cpp.o CMakeFiles/FreeCADGui.dir/qrc_schemes.cpp.o CMakeFiles/FreeCADGui.dir/Action.cpp.o CMakeFiles/FreeCADGui.dir/ActionFunction.cpp.o CMakeFiles/FreeCADGui.dir/Command.cpp.o CMakeFiles/FreeCADGui.dir/CommandDoc.cpp.o CMakeFiles/FreeCADGui.dir/CommandFeat.cpp.o CMakeFiles/FreeCADGui.dir/CommandMacro.cpp.o CMakeFiles/FreeCADGui.dir/CommandStd.cpp.o CMakeFiles/FreeCADGui.dir/CommandWindow.cpp.o CMakeFiles/FreeCADGui.dir/CommandTest.cpp.o CMakeFiles/FreeCADGui.dir/CommandView.cpp.o CMakeFiles/FreeCADGui.dir/CommandStructure.cpp.o CMakeFiles/FreeCADGui.dir/Clipping.cpp.o CMakeFiles/FreeCADGui.dir/DemoMode.cpp.o CMakeFiles/FreeCADGui.dir/DlgActivateWindowImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgUnitsCalculatorImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgDisplayPropertiesImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgInputDialogImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgMacroExecuteImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgRunExternal.cpp.o CMakeFiles/FreeCADGui.dir/DlgEditFileIncludeProptertyExternal.cpp.o CMakeFiles/FreeCADGui.dir/DlgMacroRecordImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgMaterialPropertiesImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgParameterImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgProjectInformationImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgProjectUtility.cpp.o CMakeFiles/FreeCADGui.dir/DlgPropertyLink.cpp.o CMakeFiles/FreeCADGui.dir/DlgExpressionInput.cpp.o CMakeFiles/FreeCADGui.dir/TaskDlgRelocation.cpp.o CMakeFiles/FreeCADGui.dir/DlgCheckableMessageBox.cpp.o CMakeFiles/FreeCADGui.dir/TaskCSysDragger.cpp.o CMakeFiles/FreeCADGui.dir/DlgUndoRedo.cpp.o CMakeFiles/FreeCADGui.dir/InputVector.cpp.o CMakeFiles/FreeCADGui.dir/Placement.cpp.o CMakeFiles/FreeCADGui.dir/PropertyPage.cpp.o CMakeFiles/FreeCADGui.dir/SceneInspector.cpp.o CMakeFiles/FreeCADGui.dir/TextureMapping.cpp.o CMakeFiles/FreeCADGui.dir/Transform.cpp.o CMakeFiles/FreeCADGui.dir/DownloadItem.cpp.o CMakeFiles/FreeCADGui.dir/DownloadManager.cpp.o CMakeFiles/FreeCADGui.dir/DocumentRecovery.cpp.o CMakeFiles/FreeCADGui.dir/DlgActionsImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgCommandsImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgCustomizeImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgCustomizeSpaceball.cpp.o CMakeFiles/FreeCADGui.dir/DlgCustomizeSpNavSettings.cpp.o CMakeFiles/FreeCADGui.dir/DlgKeyboardImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgToolbarsImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgWorkbenchesImp.cpp.o CMakeFiles/FreeCADGui.dir/QListWidgetCustom.cpp.o CMakeFiles/FreeCADGui.dir/DlgEditorImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgGeneralImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgOnlineHelpImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgPreferencesImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgReportViewImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgSettings3DViewImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgSettingsUnitsImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgSettingsViewColor.cpp.o CMakeFiles/FreeCADGui.dir/DlgSettingsColorGradientImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgSettingsDocumentImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgSettingsImageImp.cpp.o CMakeFiles/FreeCADGui.dir/DlgSettingsMacroImp.cpp.o CMakeFiles/FreeCADGui.dir/CombiView.cpp.o CMakeFiles/FreeCADGui.dir/DockWindow.cpp.o CMakeFiles/FreeCADGui.dir/PropertyView.cpp.o CMakeFiles/FreeCADGui.dir/ReportView.cpp.o CMakeFiles/FreeCADGui.dir/SelectionView.cpp.o CMakeFiles/FreeCADGui.dir/ToolBox.cpp.o CMakeFiles/FreeCADGui.dir/Tree.cpp.o CMakeFiles/FreeCADGui.dir/TreeView.cpp.o CMakeFiles/FreeCADGui.dir/ProjectView.cpp.o CMakeFiles/FreeCADGui.dir/DAGView/DAGView.cpp.o CMakeFiles/FreeCADGui.dir/DAGView/DAGModel.cpp.o CMakeFiles/FreeCADGui.dir/DAGView/DAGRectItem.cpp.o CMakeFiles/FreeCADGui.dir/DAGView/DAGModelGraph.cpp.o CMakeFiles/FreeCADGui.dir/DAGView/DAGFilter.cpp.o CMakeFiles/FreeCADGui.dir/CallTips.cpp.o CMakeFiles/FreeCADGui.dir/EditorView.cpp.o CMakeFiles/FreeCADGui.dir/TextDocumentEditorView.cpp.o CMakeFiles/FreeCADGui.dir/PythonConsole.cpp.o CMakeFiles/FreeCADGui.dir/PythonConsolePy.cpp.o CMakeFiles/FreeCADGui.dir/PythonDebugger.cpp.o CMakeFiles/FreeCADGui.dir/PythonEditor.cpp.o CMakeFiles/FreeCADGui.dir/SyntaxHighlighter.cpp.o CMakeFiles/FreeCADGui.dir/TextEdit.cpp.o CMakeFiles/FreeCADGui.dir/Assistant.cpp.o CMakeFiles/FreeCADGui.dir/NetworkRetriever.cpp.o CMakeFiles/FreeCADGui.dir/OnlineDocumentation.cpp.o CMakeFiles/FreeCADGui.dir/WhatsThis.cpp.o CMakeFiles/FreeCADGui.dir/Inventor/SoDrawingGrid.cpp.o CMakeFiles/FreeCADGui.dir/Inventor/SoAutoZoomTranslation.cpp.o CMakeFiles/FreeCADGui.dir/Inventor/MarkerBitmaps.cpp.o CMakeFiles/FreeCADGui.dir/Inventor/SmSwitchboard.cpp.o CMakeFiles/FreeCADGui.dir/SoFCBackgroundGradient.cpp.o CMakeFiles/FreeCADGui.dir/SoFCBoundingBox.cpp.o CMakeFiles/FreeCADGui.dir/SoFCColorBar.cpp.o CMakeFiles/FreeCADGui.dir/SoFCColorGradient.cpp.o CMakeFiles/FreeCADGui.dir/SoFCColorLegend.cpp.o CMakeFiles/FreeCADGui.dir/SoFCDB.cpp.o CMakeFiles/FreeCADGui.dir/SoFCInteractiveElement.cpp.o CMakeFiles/FreeCADGui.dir/SoFCOffscreenRenderer.cpp.o CMakeFiles/FreeCADGui.dir/SoFCSelection.cpp.o CMakeFiles/FreeCADGui.dir/SoFCUnifiedSelection.cpp.o CMakeFiles/FreeCADGui.dir/SoFCSelectionAction.cpp.o CMakeFiles/FreeCADGui.dir/SoFCVectorizeSVGAction.cpp.o CMakeFiles/FreeCADGui.dir/SoFCVectorizeU3DAction.cpp.o CMakeFiles/FreeCADGui.dir/SoNavigationDragger.cpp.o CMakeFiles/FreeCADGui.dir/SoAxisCrossKit.cpp.o CMakeFiles/FreeCADGui.dir/SoTextLabel.cpp.o CMakeFiles/FreeCADGui.dir/SoTouchEvents.cpp.o CMakeFiles/FreeCADGui.dir/SoFCCSysDragger.cpp.o CMakeFiles/FreeCADGui.dir/Language/Translator.cpp.o CMakeFiles/FreeCADGui.dir/propertyeditor/PropertyEditor.cpp.o CMakeFiles/FreeCADGui.dir/propertyeditor/PropertyItem.cpp.o CMakeFiles/FreeCADGui.dir/propertyeditor/PropertyItemDelegate.cpp.o CMakeFiles/FreeCADGui.dir/propertyeditor/PropertyModel.cpp.o CMakeFiles/FreeCADGui.dir/TaskView/TaskAppearance.cpp.o CMakeFiles/FreeCADGui.dir/TaskView/TaskSelectLinkProperty.cpp.o CMakeFiles/FreeCADGui.dir/TaskView/TaskEditControl.cpp.o CMakeFiles/FreeCADGui.dir/TaskView/TaskView.cpp.o CMakeFiles/FreeCADGui.dir/TaskView/TaskDialog.cpp.o CMakeFiles/FreeCADGui.dir/TaskView/TaskDialogPython.cpp.o CMakeFiles/FreeCADGui.dir/TaskView/TaskWatcher.cpp.o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iisfreecadscheme.cpp.o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iisiconlabel.cpp.o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iistaskbox.cpp.o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iistaskgroup.cpp.o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iistaskheader.cpp.o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iistaskpanel.cpp.o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iistaskpanelscheme.cpp.o CMakeFiles/FreeCADGui.dir/iisTaskPanel/src/iiswinxptaskpanelscheme.cpp.o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/actionbox.cpp.o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/actionlabel.cpp.o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/actiongroup.cpp.o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/actionpanel.cpp.o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/actionpanelscheme.cpp.o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/androidpanelscheme.cpp.o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/macpanelscheme.cpp.o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/taskgroup_p.cpp.o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/taskheader_p.cpp.o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/winvistapanelscheme.cpp.o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/winxppanelscheme.cpp.o CMakeFiles/FreeCADGui.dir/QSint/actionpanel/freecadscheme.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/ContextMenu.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/DragDropHandler.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/EventFilter.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/FocusHandler.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/ImageReader.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/InputDevice.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/InteractionMode.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/Keyboard.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/KeyboardP.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/Mouse.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/NativeEvent.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/QtCoinCompatibility.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/Quarter.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/QuarterP.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/QuarterWidget.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/QuarterWidgetP.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/SensorManager.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/SignalThread.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/SoQTQuarterAdaptor.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/SpaceNavigatorDevice.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/moc_SignalThread.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/moc_InteractionMode.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/moc_SensorManager.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/moc_ContextMenu.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/eventhandlers/moc_FocusHandler.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/eventhandlers/moc_DragDropHandler.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/eventhandlers/moc_EventFilter.cpp.o CMakeFiles/FreeCADGui.dir/Quarter/moc_QuarterWidget.cpp.o CMakeFiles/FreeCADGui.dir/Flag.cpp.o CMakeFiles/FreeCADGui.dir/GLBuffer.cpp.o CMakeFiles/FreeCADGui.dir/GLPainter.cpp.o CMakeFiles/FreeCADGui.dir/MouseSelection.cpp.o CMakeFiles/FreeCADGui.dir/NavigationStyle.cpp.o CMakeFiles/FreeCADGui.dir/InventorNavigationStyle.cpp.o CMakeFiles/FreeCADGui.dir/CADNavigationStyle.cpp.o CMakeFiles/FreeCADGui.dir/RevitNavigationStyle.cpp.o CMakeFiles/FreeCADGui.dir/BlenderNavigationStyle.cpp.o CMakeFiles/FreeCADGui.dir/MayaGestureNavigationStyle.cpp.o CMakeFiles/FreeCADGui.dir/OpenCascadeNavigationStyle.cpp.o CMakeFiles/FreeCADGui.dir/TouchpadNavigationStyle.cpp.o CMakeFiles/FreeCADGui.dir/GestureNavigationStyle.cpp.o CMakeFiles/FreeCADGui.dir/SplitView3DInventor.cpp.o CMakeFiles/FreeCADGui.dir/View.cpp.o CMakeFiles/FreeCADGui.dir/View3DInventor.cpp.o CMakeFiles/FreeCADGui.dir/View3DInventorExamples.cpp.o CMakeFiles/FreeCADGui.dir/View3DInventorViewer.cpp.o CMakeFiles/FreeCADGui.dir/View3DInventorRiftViewer.cpp.o CMakeFiles/FreeCADGui.dir/CoinRiftWidget.cpp.o CMakeFiles/FreeCADGui.dir/View3DPy.cpp.o CMakeFiles/FreeCADGui.dir/View3DViewerPy.cpp.o CMakeFiles/FreeCADGui.dir/NaviCube.cpp.o CMakeFiles/FreeCADGui.dir/ViewProvider.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderExtension.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderGroupExtension.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderGeoFeatureGroupExtension.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderOriginGroupExtension.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderAnnotation.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderDocumentObject.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderDocumentObjectGroup.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderDocumentObjectPyImp.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderDragger.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderExtern.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderFeature.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderGeometryObject.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderInventorObject.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderMeasureDistance.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderPyImp.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderPythonFeature.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderVRMLObject.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderBuilder.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderPlacement.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderOriginFeature.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderPlane.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderLine.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderGeoFeatureGroup.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderOriginGroup.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderPart.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderOrigin.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderMaterialObject.cpp.o CMakeFiles/FreeCADGui.dir/ViewProviderTextDocument.cpp.o CMakeFiles/FreeCADGui.dir/FileDialog.cpp.o CMakeFiles/FreeCADGui.dir/MainWindow.cpp.o CMakeFiles/FreeCADGui.dir/PrefWidgets.cpp.o CMakeFiles/FreeCADGui.dir/InputField.cpp.o CMakeFiles/FreeCADGui.dir/ProgressBar.cpp.o CMakeFiles/FreeCADGui.dir/QuantitySpinBox.cpp.o CMakeFiles/FreeCADGui.dir/SpinBox.cpp.o CMakeFiles/FreeCADGui.dir/Splashscreen.cpp.o CMakeFiles/FreeCADGui.dir/WidgetFactory.cpp.o CMakeFiles/FreeCADGui.dir/Widgets.cpp.o CMakeFiles/FreeCADGui.dir/Window.cpp.o CMakeFiles/FreeCADGui.dir/MDIView.cpp.o CMakeFiles/FreeCADGui.dir/GraphvizView.cpp.o CMakeFiles/FreeCADGui.dir/ActiveObjectList.cpp.o CMakeFiles/FreeCADGui.dir/DockWindowManager.cpp.o CMakeFiles/FreeCADGui.dir/MenuManager.cpp.o CMakeFiles/FreeCADGui.dir/PythonWorkbenchPyImp.cpp.o CMakeFiles/FreeCADGui.dir/ToolBarManager.cpp.o CMakeFiles/FreeCADGui.dir/ToolBoxManager.cpp.o CMakeFiles/FreeCADGui.dir/Workbench.cpp.o CMakeFiles/FreeCADGui.dir/WorkbenchFactory.cpp.o CMakeFiles/FreeCADGui.dir/WorkbenchManager.cpp.o CMakeFiles/FreeCADGui.dir/WorkbenchPyImp.cpp.o CMakeFiles/FreeCADGui.dir/SelectionObjectPyImp.cpp.o CMakeFiles/FreeCADGui.dir/SelectionObject.cpp.o CMakeFiles/FreeCADGui.dir/Selection.cpp.o CMakeFiles/FreeCADGui.dir/SelectionFilter.cpp.o CMakeFiles/FreeCADGui.dir/PreCompiled.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../lib/libFreeCADApp.so -lCoin -lpthread /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so ../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 -lpthread /usr/lib64/libQt5Widgets.so.5.15.2 -lpthread /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 71%] Built target FreeCADGui /usr/bin/gmake -f src/Main/CMakeFiles/FreeCADGuiPy.dir/build.make src/Main/CMakeFiles/FreeCADGuiPy.dir/depend /usr/bin/gmake -f src/Main/CMakeFiles/FreeCADMain.dir/build.make src/Main/CMakeFiles/FreeCADMain.dir/depend /usr/bin/gmake -f src/Mod/Points/Gui/CMakeFiles/PointsGui.dir/build.make src/Mod/Points/Gui/CMakeFiles/PointsGui.dir/depend /usr/bin/gmake -f src/Mod/Test/Gui/CMakeFiles/QtUnitGui.dir/build.make src/Mod/Test/Gui/CMakeFiles/QtUnitGui.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Main /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main/CMakeFiles/FreeCADGuiPy.dir/DependInfo.cmake --color= /usr/bin/gmake -f src/Mod/Image/Gui/CMakeFiles/ImageGui.dir/build.make src/Mod/Image/Gui/CMakeFiles/ImageGui.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Main /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main/CMakeFiles/FreeCADMain.dir/DependInfo.cmake --color= gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/build.make src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/depend /usr/bin/gmake -f src/Mod/Part/Gui/CMakeFiles/PartGui.dir/build.make src/Mod/Part/Gui/CMakeFiles/PartGui.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main/CMakeFiles/FreeCADMain.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main/CMakeFiles/FreeCADMain.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main/CMakeFiles/FreeCADMain.dir/depend.internal". [ 71%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Resources/icons/MeshWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Mesh/Resources/icons/MeshWorkbench.svg Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main/CMakeFiles/FreeCADGuiPy.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main/CMakeFiles/FreeCADGuiPy.dir/depend.internal". [ 71%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/Resources/icons/TestWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Test/Resources/icons/TestWorkbench.svg Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main/CMakeFiles/FreeCADGuiPy.dir/depend.internal". gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/Resources/icons/TestWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Test/Resources/icons/TestWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Resources/icons/MeshWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Mesh/Resources/icons/MeshWorkbench.svg [ 71%] Generating moc_DlgEvaluateMeshImp.cpp [ 71%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Resources/icons/PartWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Part/Resources/icons/PartWorkbench.svg [ 71%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Resources/icons/PointsWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Points/Resources/icons/PointsWorkbench.svg Scanning dependencies of target FreeCADMain cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/moc_DlgEvaluateMeshImp.cpp_parameters cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Resources/icons/PointsWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Points/Resources/icons/PointsWorkbench.svg gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Main/CMakeFiles/FreeCADMain.dir/build.make src/Main/CMakeFiles/FreeCADMain.dir/build [ 71%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Resources/icons/ImageWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Image/Resources/icons/ImageWorkbench.svg gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Resources/icons/PartWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Part/Resources/icons/PartWorkbench.svg [ 71%] Building CXX object src/Main/CMakeFiles/FreeCADMain.dir/MainGui.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Resources/icons/ImageWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Image/Resources/icons/ImageWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -pthread -fPIC -o CMakeFiles/FreeCADMain.dir/MainGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Main/MainGui.cpp [ 71%] Generating moc_DlgEvaluateSettings.cpp [ 71%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/qtunittest.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/qtunittest.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/moc_DlgEvaluateSettings.cpp_parameters cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/qtunittest.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Test/qtunittest.py [ 71%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Points/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Points/InitGui.py [ 71%] Generating moc_UnitTestImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui/moc_UnitTestImp.cpp_parameters [ 71%] Generating moc_ImageOrientationDialog.cpp [ 71%] Generating moc_CrossSections.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_CrossSections.cpp_parameters [ 71%] Generating qrc_Test.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui && /usr/lib64/qt5/bin/rcc --name Test --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui/qrc_Test.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/Resources/Test.qrc Scanning dependencies of target FreeCADGuiPy [ 71%] Generating moc_DlgPointsReadImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui/moc_ImageOrientationDialog.cpp_parameters gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui/moc_DlgPointsReadImp.cpp_parameters /usr/bin/gmake -f src/Main/CMakeFiles/FreeCADGuiPy.dir/build.make src/Main/CMakeFiles/FreeCADGuiPy.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 71%] Building CXX object src/Main/CMakeFiles/FreeCADGuiPy.dir/FreeCADGuiPy.cpp.o [ 71%] Generating ui_UnitTest.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui/ui_UnitTest.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTest.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFreeCADGuiPy_EXPORTS -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FreeCADGuiPy.dir/FreeCADGuiPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Main/FreeCADGuiPy.cpp [ 71%] Generating moc_ImageView.cpp [ 71%] Generating qrc_Points.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui && /usr/lib64/qt5/bin/rcc --name Points --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui/qrc_Points.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Resources/Points.qrc cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui/moc_ImageView.cpp_parameters [ 71%] Generating moc_DlgRegularSolidImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/moc_DlgRegularSolidImp.cpp_parameters cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui/CMakeFiles/QtUnitGui.dir/DependInfo.cmake --color= [ 71%] Generating moc_DlgBooleanOperation.cpp Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui/CMakeFiles/QtUnitGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui/CMakeFiles/QtUnitGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui/CMakeFiles/QtUnitGui.dir/depend.internal". cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_DlgBooleanOperation.cpp_parameters Scanning dependencies of target QtUnitGui [ 71%] Generating ui_DlgPointsRead.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui/ui_DlgPointsRead.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/DlgPointsRead.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui/CMakeFiles/PointsGui.dir/DependInfo.cmake --color= gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Test/Gui/CMakeFiles/QtUnitGui.dir/build.make src/Mod/Test/Gui/CMakeFiles/QtUnitGui.dir/build Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui/CMakeFiles/PointsGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui/CMakeFiles/PointsGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui/CMakeFiles/PointsGui.dir/depend.internal". gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 71%] Building CXX object src/Mod/Test/Gui/CMakeFiles/QtUnitGui.dir/UnitTestImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DQtUnitGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/QtUnitGui.dir/UnitTestImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.cpp Scanning dependencies of target PointsGui gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Points/Gui/CMakeFiles/PointsGui.dir/build.make src/Mod/Points/Gui/CMakeFiles/PointsGui.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 71%] Building CXX object src/Mod/Points/Gui/CMakeFiles/PointsGui.dir/DlgPointsReadImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPointsGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui -I/usr/include/Coin4 -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PointsGui.dir/DlgPointsReadImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/DlgPointsReadImp.cpp [ 71%] Generating moc_DlgSettingsImportExportImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/moc_DlgSettingsImportExportImp.cpp_parameters [ 71%] Generating moc_DlgSettingsMeshView.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/moc_DlgSettingsMeshView.cpp_parameters [ 71%] Generating moc_DlgSmoothing.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/moc_DlgSmoothing.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/DlgPointsReadImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/DlgPointsReadImp.h:39:84: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 39 | DlgPointsReadImp(const char *FileName, QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui/ui_DlgPointsRead.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/DlgPointsReadImp.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/DlgPointsReadImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 71%] Generating moc_MeshEditor.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/moc_MeshEditor.cpp_parameters [ 71%] Generating moc_DlgExtrusion.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_DlgExtrusion.cpp_parameters [ 71%] Generating moc_OpenGLImageBox.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui/moc_OpenGLImageBox.cpp_parameters [ 71%] Generating qrc_Image.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui && /usr/lib64/qt5/bin/rcc --name Image --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui/qrc_Image.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Resources/Image.qrc [ 71%] Building CXX object src/Mod/Points/Gui/CMakeFiles/PointsGui.dir/qrc_Points.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPointsGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui -I/usr/include/Coin4 -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PointsGui.dir/qrc_Points.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui/qrc_Points.cpp [ 71%] Generating ui_ImageOrientationDialog.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui/ui_ImageOrientationDialog.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageOrientationDialog.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui/CMakeFiles/ImageGui.dir/DependInfo.cmake --color= In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.h:44:72: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 44 | void setProgressFraction(float fraction, const QString& = QString::null); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qdialog.h:44, from /usr/include/qt5/QtWidgets/qmessagebox.h:45, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.h:44:72: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 44 | void setProgressFraction(float fraction, const QString& = QString::null); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qdialog.h:44, from /usr/include/qt5/QtWidgets/qmessagebox.h:45, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.h:59:61: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 59 | UnitTestDialog(QWidget* parent = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.cpp: In static member function 'static TestGui::UnitTestDialog* TestGui::UnitTestDialog::instance()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.cpp:51:60: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | _instance = new UnitTestDialog(Gui::getMainWindow()); | ^ Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui/CMakeFiles/ImageGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui/CMakeFiles/ImageGui.dir/depend.internal". In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui/CMakeFiles/ImageGui.dir/depend.internal". /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.cpp: In member function 'void TestGui::UnitTestDialog::insertError(const QString&, const QString&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.cpp:325:34: warning: 'void QTreeWidgetItem::setTextColor(int, const QColor&)' is deprecated: Use QTreeWidgetItem::setForeground() instead [-Wdeprecated-declarations] 325 | item->setTextColor(0, Qt::red); | ^ In file included from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui/ui_UnitTest.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.cpp:33: /usr/include/qt5/QtWidgets/qtreewidget.h:156:17: note: declared here 156 | inline void setTextColor(int column, const QColor &color) | ^~~~~~~~~~~~ Scanning dependencies of target ImageGui gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Image/Gui/CMakeFiles/ImageGui.dir/build.make src/Mod/Image/Gui/CMakeFiles/ImageGui.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 71%] Building CXX object src/Mod/Image/Gui/CMakeFiles/ImageGui.dir/qrc_Image.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DImageGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ImageGui.dir/qrc_Image.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui/qrc_Image.cpp [ 71%] Building CXX object src/Mod/Points/Gui/CMakeFiles/PointsGui.dir/AppPointsGui.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPointsGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui -I/usr/include/Coin4 -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PointsGui.dir/AppPointsGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/AppPointsGui.cpp [ 71%] Generating moc_PropertyEditorMesh.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/moc_PropertyEditorMesh.cpp_parameters [ 71%] Building CXX object src/Mod/Image/Gui/CMakeFiles/ImageGui.dir/AppImageGui.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DImageGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ImageGui.dir/AppImageGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/AppImageGui.cpp [ 71%] Building CXX object src/Mod/Test/Gui/CMakeFiles/QtUnitGui.dir/UnitTestPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DQtUnitGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/QtUnitGui.dir/UnitTestPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestPy.cpp [ 71%] Building CXX object src/Mod/Image/Gui/CMakeFiles/ImageGui.dir/AppImageGuiPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DImageGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ImageGui.dir/AppImageGuiPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/AppImageGuiPy.cpp [ 71%] Generating moc_DlgFilletEdges.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_DlgFilletEdges.cpp_parameters [ 71%] Generating moc_RemoveComponents.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/moc_RemoveComponents.cpp_parameters [ 71%] Linking CXX executable ../../bin/FreeCAD cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main && /usr/bin/cmake -E cmake_link_script CMakeFiles/FreeCADMain.dir/link.txt --verbose=1 /usr/bin/c++ -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -rdynamic CMakeFiles/FreeCADMain.dir/MainGui.cpp.o -o ../../bin/FreeCAD -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../lib/libFreeCADGui.so ../../lib/libFreeCADApp.so ../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 -lCoin /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5Widgets.so.5.15.2 -lpthread /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestPy.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.h:44:72: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 44 | void setProgressFraction(float fraction, const QString& = QString::null); | ^~~~ In file included from /usr/include/qt5/QtCore/qhashfunctions.h:44, from /usr/include/qt5/QtCore/qlist.h:47, from /usr/include/qt5/QtCore/qvariant.h:45, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui/ui_UnitTest.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestPy.cpp:31: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestPy.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.h:44:72: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 44 | void setProgressFraction(float fraction, const QString& = QString::null); | ^~~~ In file included from /usr/include/qt5/QtCore/qhashfunctions.h:44, from /usr/include/qt5/QtCore/qlist.h:47, from /usr/include/qt5/QtCore/qvariant.h:45, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui/ui_UnitTest.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestPy.cpp:31: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestPy.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.h:59:61: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 59 | UnitTestDialog(QWidget* parent = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui/ui_UnitTest.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestPy.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 71%] Linking CXX shared library ../../lib/FreeCADGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Main && /usr/bin/cmake -E cmake_link_script CMakeFiles/FreeCADGuiPy.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,FreeCADGui.so -o ../../lib/FreeCADGui.so CMakeFiles/FreeCADGuiPy.dir/FreeCADGuiPy.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../lib/libFreeCADGui.so ../../lib/libFreeCADApp.so ../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 -lCoin /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5Widgets.so.5.15.2 -lpthread /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 71%] Built target FreeCADMain /usr/bin/gmake -f src/Mod/Raytracing/Gui/CMakeFiles/RaytracingGui.dir/build.make src/Mod/Raytracing/Gui/CMakeFiles/RaytracingGui.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 71%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Resources/icons/RaytracingWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Raytracing/Resources/icons/RaytracingWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Resources/icons/RaytracingWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Raytracing/Resources/icons/RaytracingWorkbench.svg [ 71%] FreeCADpov.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui && /usr/bin/python3 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Tools/PythonToCPP.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/FreeCADpov FreeCADpov.h [ 71%] Generating moc_DlgSettingsRayImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/moc_DlgSettingsRayImp.cpp_parameters [ 71%] Generating qrc_Raytracing.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui && /usr/lib64/qt5/bin/rcc --name Raytracing --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/qrc_Raytracing.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Resources/Raytracing.qrc [ 71%] Generating ui_DlgSettingsRay.h [ 71%] Generating moc_SegmentationBestFit.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/ui_DlgSettingsRay.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRay.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/moc_SegmentationBestFit.cpp_parameters cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/CMakeFiles/RaytracingGui.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/CMakeFiles/RaytracingGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/CMakeFiles/RaytracingGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/CMakeFiles/RaytracingGui.dir/depend.internal". [ 71%] Generating moc_DlgPartBoxImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_DlgPartBoxImp.cpp_parameters Scanning dependencies of target RaytracingGui gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Raytracing/Gui/CMakeFiles/RaytracingGui.dir/build.make src/Mod/Raytracing/Gui/CMakeFiles/RaytracingGui.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 71%] Building CXX object src/Mod/Raytracing/Gui/CMakeFiles/RaytracingGui.dir/qrc_Raytracing.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRaytracingGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RaytracingGui.dir/qrc_Raytracing.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/qrc_Raytracing.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 71%] Built target FreeCADGuiPy [ 71%] Generating moc_Selection.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/moc_Selection.cpp_parameters [ 71%] Building CXX object src/Mod/Raytracing/Gui/CMakeFiles/RaytracingGui.dir/AppRaytracingGui.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRaytracingGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RaytracingGui.dir/AppRaytracingGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp [ 71%] Building CXX object src/Mod/Test/Gui/CMakeFiles/QtUnitGui.dir/qrc_Test.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DQtUnitGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/QtUnitGui.dir/qrc_Test.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui/qrc_Test.cpp [ 71%] Generating moc_DlgPartCylinderImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_DlgPartCylinderImp.cpp_parameters [ 71%] Building CXX object src/Mod/Test/Gui/CMakeFiles/QtUnitGui.dir/AppTestGui.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DQtUnitGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/QtUnitGui.dir/AppTestGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/AppTestGui.cpp [ 71%] Generating moc_DlgPartImportIgesImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_DlgPartImportIgesImp.cpp_parameters [ 71%] Generating moc_DlgPartImportStepImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_DlgPartImportStepImp.cpp_parameters [ 71%] Generating moc_DlgPrimitives.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_DlgPrimitives.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/ViewProvider.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/AppPointsGui.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/AppImageGui.cpp:19: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/AppTestGui.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.h:44:72: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 44 | void setProgressFraction(float fraction, const QString& = QString::null); | ^~~~ In file included from /usr/include/qt5/QtCore/qhashfunctions.h:44, from /usr/include/qt5/QtCore/qlist.h:47, from /usr/include/qt5/QtCore/qvariant.h:45, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui/ui_UnitTest.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/AppTestGui.cpp:30: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/AppTestGui.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.h:44:72: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 44 | void setProgressFraction(float fraction, const QString& = QString::null); | ^~~~ In file included from /usr/include/qt5/QtCore/qhashfunctions.h:44, from /usr/include/qt5/QtCore/qlist.h:47, from /usr/include/qt5/QtCore/qvariant.h:45, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui/ui_UnitTest.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/AppTestGui.cpp:30: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/AppTestGui.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.h:59:61: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 59 | UnitTestDialog(QWidget* parent = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui/ui_UnitTest.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/UnitTestImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/AppTestGui.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 71%] Generating qrc_Mesh.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/rcc --name Mesh --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/qrc_Mesh.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Resources/Mesh.qrc [ 71%] Generating ui_DlgEvaluateMesh.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgEvaluateMesh.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMesh.ui [ 71%] Generating ui_DlgEvaluateSettings.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgEvaluateSettings.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateSettings.ui [ 71%] Generating moc_DlgRevolution.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_DlgRevolution.cpp_parameters [ 71%] Generating ui_DlgRegularSolid.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgRegularSolid.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolid.ui [ 71%] Generating ui_DlgSettingsImportExport.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgSettingsImportExport.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsImportExport.ui [ 71%] Generating ui_DlgSettingsMeshView.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgSettingsMeshView.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.ui [ 71%] Generating ui_DlgSmoothing.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgSmoothing.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSmoothing.ui [ 71%] Generating ui_RemoveComponents.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_RemoveComponents.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.ui [ 71%] Generating ui_Segmentation.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_Segmentation.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Segmentation.ui [ 71%] Generating ui_SegmentationBestFit.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_SegmentationBestFit.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SegmentationBestFit.ui In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/AppImageGuiPy.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 71%] Generating ui_Selection.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_Selection.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Selection.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/depend.internal". [ 71%] Building CXX object src/Mod/Points/Gui/CMakeFiles/PointsGui.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPointsGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui -I/usr/include/Coin4 -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PointsGui.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp [ 71%] Building CXX object src/Mod/Test/Gui/CMakeFiles/QtUnitGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DQtUnitGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/QtUnitGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Test/Gui/PreCompiled.cpp Scanning dependencies of target MeshGui gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/build.make src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/build [ 71%] Linking CXX shared library ../../../../Mod/Test/QtUnitGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Test/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/QtUnitGui.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,QtUnitGui.so -o ../../../../Mod/Test/QtUnitGui.so CMakeFiles/QtUnitGui.dir/UnitTestImp.cpp.o CMakeFiles/QtUnitGui.dir/UnitTestPy.cpp.o CMakeFiles/QtUnitGui.dir/qrc_Test.cpp.o CMakeFiles/QtUnitGui.dir/AppTestGui.cpp.o CMakeFiles/QtUnitGui.dir/PreCompiled.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../lib/libFreeCADGui.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 -lCoin /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5Widgets.so.5.15.2 -lpthread /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 71%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/DlgEvaluateMeshImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/DlgEvaluateMeshImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/AppImageGuiPy.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/AppImageGuiPy.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/AppImageGuiPy.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/OpenGLImageBox.h:40:58: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 40 | GLImageBox(QWidget * parent = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/AppImageGuiPy.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 71%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/DlgEvaluateSettings.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/DlgEvaluateSettings.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateSettings.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.h:115:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 115 | DlgPreferencesImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.h:54:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 54 | DlgCustomizeImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 71%] Built target QtUnitGui [ 71%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/DlgRegularSolidImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/DlgRegularSolidImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.cpp [ 71%] Generating moc_DlgSettings3DViewPartImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_DlgSettings3DViewPartImp.cpp_parameters [ 71%] Generating moc_DlgSettingsGeneral.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_DlgSettingsGeneral.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/ui_DlgSettingsRay.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/ui_DlgSettingsRay.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/ui_DlgSettingsRay.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 71%] Generating moc_DlgSettingsObjectColor.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_DlgSettingsObjectColor.cpp_parameters [ 71%] Generating moc_Mirroring.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_Mirroring.cpp_parameters [ 71%] Building CXX object src/Mod/Points/Gui/CMakeFiles/PointsGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPointsGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui -I/usr/include/Coin4 -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PointsGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/PreCompiled.cpp /usr/bin/gmake -f src/Mod/Drawing/Gui/CMakeFiles/DrawingGui.dir/build.make src/Mod/Drawing/Gui/CMakeFiles/DrawingGui.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 71%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Resources/icons/DrawingWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Resources/icons/DrawingWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Resources/icons/DrawingWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Drawing/Resources/icons/DrawingWorkbench.svg [ 71%] Generating moc_DrawingView.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui/moc_DrawingView.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/ui_DlgSettingsRay.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/ui_DlgSettingsRay.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateSettings.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateSettings.h:41:67: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 41 | DlgEvaluateSettings(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialog.h:43, from /usr/include/qt5/QtWidgets/QDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateSettings.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateSettings.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 71%] Building CXX object src/Mod/Image/Gui/CMakeFiles/ImageGui.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DImageGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ImageGui.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Command.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/AppRaytracingGui.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 71%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/DlgSettingsMeshView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/DlgSettingsMeshView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.cpp [ 71%] Generating moc_TaskDialog.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui/moc_TaskDialog.cpp_parameters [ 71%] Generating moc_PropertyEnumAttacherItem.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_PropertyEnumAttacherItem.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.h:70:66: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 70 | DlgEvaluateMeshImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.h:148:68: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 148 | DockEvaluateMeshImp( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 71%] Generating moc_TaskOrthoViews.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui/moc_TaskOrthoViews.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateSettings.h:41:67: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 41 | DlgEvaluateSettings(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:30: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 71%] Building CXX object src/Mod/Raytracing/Gui/CMakeFiles/RaytracingGui.dir/AppRaytracingGuiPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRaytracingGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RaytracingGui.dir/AppRaytracingGuiPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/AppRaytracingGuiPy.cpp /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgSettingsMeshView.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgSettingsMeshView.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgSettingsMeshView.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgSettingsMeshView.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /usr/include/qt5/QtCore/QFileInfo:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 71%] Generating moc_TaskAttacher.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_TaskAttacher.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /usr/include/qt5/QtCore/QFileInfo:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /usr/include/qt5/QtCore/QFileInfo:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /usr/include/qt5/QtCore/QFileInfo:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgSettingsMeshView.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgSettingsMeshView.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgSettingsMeshView.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgSettingsMeshView.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgSettingsMeshView.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgSettingsMeshView.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /usr/include/qt5/QtCore/QFileInfo:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /usr/include/qt5/QtCore/QFileInfo:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /usr/include/qt5/QtCore/QFileInfo:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /usr/include/qt5/QtCore/QFileInfo:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /usr/include/qt5/QtCore/QFileInfo:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /usr/include/qt5/QtCore/QFileInfo:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /usr/include/qt5/QtCore/QFileInfo:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 71%] Generating qrc_Drawing.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui && /usr/lib64/qt5/bin/rcc --name Drawing --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui/qrc_Drawing.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Resources/Drawing.qrc [ 72%] Generating ui_TaskOrthoViews.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui/ui_TaskOrthoViews.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskOrthoViews.ui In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui/CMakeFiles/DrawingGui.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui/CMakeFiles/DrawingGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui/CMakeFiles/DrawingGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui/CMakeFiles/DrawingGui.dir/depend.internal". In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/DlgPointsReadImp.h:39:84: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 39 | DlgPointsReadImp(const char *FileName, QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /usr/include/qt5/QtCore/QFileInfo:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp: In member function 'virtual void CmdPointsImport::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:78:16: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 78 | QString::null, QString(), QString::fromLatin1("%1 (*.asc *.pcd *.ply);;%2 (*.*)") | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /usr/include/qt5/QtCore/QFileInfo:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:78:16: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 78 | QString::null, QString(), QString::fromLatin1("%1 (*.asc *.pcd *.ply);;%2 (*.*)") | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /usr/include/qt5/QtCore/QFileInfo:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:79:67: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 79 | .arg(QObject::tr("Point formats"), QObject::tr("All Files"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /usr/include/qt5/QtCore/QFileInfo:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp: In member function 'virtual void CmdPointsExport::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:128:20: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 128 | QString::null, QString(), QString::fromLatin1("%1 (*.asc *.pcd *.ply);;%2 (*.*)") | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /usr/include/qt5/QtCore/QFileInfo:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:128:20: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 128 | QString::null, QString(), QString::fromLatin1("%1 (*.asc *.pcd *.ply);;%2 (*.*)") | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtCore/qiodevice.h:45, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /usr/include/qt5/QtCore/QFileInfo:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:129:71: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 129 | .arg(QObject::tr("Point formats"), QObject::tr("All Files"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /usr/include/qt5/QtCore/QFileInfo:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp: In member function 'void MeshGui::DlgEvaluateMeshImp::on_buttonBox_clicked(QAbstractButton*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:1210:37: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 1210 | DlgEvaluateSettings dlg(this); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp: In static member function 'static MeshGui::DockEvaluateMeshImp* MeshGui::DockEvaluateMeshImp::instance()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:1250:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 1250 | _instance = new DockEvaluateMeshImp(Gui::getMainWindow()); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdockwidget.h:43, from /usr/include/qt5/QtWidgets/QDockWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ Scanning dependencies of target DrawingGui gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Drawing/Gui/CMakeFiles/DrawingGui.dir/build.make src/Mod/Drawing/Gui/CMakeFiles/DrawingGui.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 72%] Building CXX object src/Mod/Drawing/Gui/CMakeFiles/DrawingGui.dir/qrc_Drawing.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawingGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/DrawingGui.dir/qrc_Drawing.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui/qrc_Drawing.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcheckbox.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 72%] Building CXX object src/Mod/Image/Gui/CMakeFiles/ImageGui.dir/ImageOrientationDialog.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DImageGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ImageGui.dir/ImageOrientationDialog.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageOrientationDialog.cpp [ 72%] Building CXX object src/Mod/Drawing/Gui/CMakeFiles/DrawingGui.dir/AppDrawingGui.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawingGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/DrawingGui.dir/AppDrawingGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/AppDrawingGui.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcheckbox.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcheckbox.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcheckbox.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcheckbox.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcheckbox.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.h:35:66: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 35 | DlgRegularSolidImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcheckbox.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.h:52:72: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | SingleDlgRegularSolidImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcheckbox.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.cpp: In static member function 'static MeshGui::SingleDlgRegularSolidImp* MeshGui::SingleDlgRegularSolidImp::instance()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.cpp:231:71: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 231 | _instance = new SingleDlgRegularSolidImp( Gui::getMainWindow()); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcheckbox.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 72%] Generating moc_TaskCheckGeometry.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_TaskCheckGeometry.cpp_parameters [ 72%] Building CXX object src/Mod/Points/Gui/CMakeFiles/PointsGui.dir/ViewProvider.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPointsGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui -I/usr/include/Coin4 -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PointsGui.dir/ViewProvider.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/ViewProvider.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Command.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Command.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Command.cpp:14: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Command.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/OpenGLImageBox.h:40:58: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 40 | GLImageBox(QWidget * parent = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Command.cpp:14: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Command.cpp: In member function 'virtual void CmdImageOpen::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Command.cpp:76:55: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 76 | QString::null, formats); | ^~~~ In file included from /usr/include/qt5/QtGui/qkeysequence.h:44, from /usr/include/qt5/QtWidgets/qaction.h:44, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Command.cpp:14: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Command.cpp:76:55: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 76 | QString::null, formats); | ^~~~ In file included from /usr/include/qt5/QtGui/qkeysequence.h:44, from /usr/include/qt5/QtWidgets/qaction.h:44, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Command.cpp:14: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Command.cpp: In member function 'virtual void CmdCreateImagePlane::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Command.cpp:123:55: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 123 | QString::null, formats); | ^~~~ In file included from /usr/include/qt5/QtGui/qkeysequence.h:44, from /usr/include/qt5/QtWidgets/qaction.h:44, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Command.cpp:14: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Command.cpp:123:55: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 123 | QString::null, formats); | ^~~~ In file included from /usr/include/qt5/QtGui/qkeysequence.h:44, from /usr/include/qt5/QtWidgets/qaction.h:44, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Command.cpp:14: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ [ 72%] Generating moc_TaskDimension.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_TaskDimension.cpp_parameters [ 72%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/DlgSettingsImportExportImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/DlgSettingsImportExportImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsImportExportImp.cpp [ 72%] Generating moc_TaskFaceColors.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_TaskFaceColors.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/AppRaytracingGuiPy.cpp:40: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/AppRaytracingGuiPy.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /usr/include/qt5/QtCore/QFileInfo:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/AppRaytracingGuiPy.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 72%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/DlgSmoothing.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/DlgSmoothing.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSmoothing.cpp [ 73%] Building CXX object src/Mod/Image/Gui/CMakeFiles/ImageGui.dir/ViewProviderImagePlane.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DImageGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ImageGui.dir/ViewProviderImagePlane.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ViewProviderImagePlane.cpp [ 73%] Building CXX object src/Mod/Drawing/Gui/CMakeFiles/DrawingGui.dir/AppDrawingGuiPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawingGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/DrawingGui.dir/AppDrawingGuiPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/AppDrawingGuiPy.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/AppDrawingGui.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 74%] Generating moc_TaskLoft.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_TaskLoft.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgSettingsImportExport.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsImportExportImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qwidget.h:43, from /usr/include/qt5/QtWidgets/QWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsImportExportImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsImportExportImp.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgSettingsImportExport.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsImportExportImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qwidget.h:43, from /usr/include/qt5/QtWidgets/QWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsImportExportImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsImportExportImp.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgSettingsImportExport.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsImportExportImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qwidget.h:43, from /usr/include/qt5/QtWidgets/QWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsImportExportImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsImportExportImp.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgSettingsImportExport.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsImportExportImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qwidget.h:43, from /usr/include/qt5/QtWidgets/QWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsImportExportImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsImportExportImp.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgSettingsImportExport.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsImportExportImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qwidget.h:43, from /usr/include/qt5/QtWidgets/QWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PropertyPage.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsImportExportImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsImportExportImp.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/ViewProvider.cpp:50: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/ViewProviderPage.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/AppDrawingGui.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/AppDrawingGui.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 75%] Building CXX object src/Mod/Raytracing/Gui/CMakeFiles/RaytracingGui.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRaytracingGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RaytracingGui.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/ViewProvider.cpp:53: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/ViewProvider.cpp:52: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 75%] Generating moc_TaskOffset.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_TaskOffset.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/ViewProvider.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/ViewProvider.cpp:52: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/ViewProvider.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/ViewProvider.cpp:52: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/ViewProvider.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/ViewProvider.cpp:52: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/ViewProvider.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/ViewProvider.cpp:52: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/ViewProvider.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/ViewProvider.cpp:52: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/ViewProvider.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/ViewProvider.cpp:52: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 76%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/RemoveComponents.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/RemoveComponents.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.cpp [ 76%] Building CXX object src/Mod/Drawing/Gui/CMakeFiles/DrawingGui.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawingGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/DrawingGui.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ViewProviderImagePlane.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ViewProviderImagePlane.cpp:42: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSmoothing.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSmoothing.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/AppDrawingGuiPy.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 76%] Generating moc_TaskShapeBuilder.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_TaskShapeBuilder.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSmoothing.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSmoothing.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSmoothing.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSmoothing.cpp:29: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSmoothing.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSmoothing.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSmoothing.h:76:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 76 | SmoothingDialog(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qbuttongroup.h:43, from /usr/include/qt5/QtWidgets/QButtonGroup:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSmoothing.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/AppDrawingGuiPy.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /usr/include/qt5/QtCore/QFileInfo:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/AppDrawingGuiPy.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 76%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/Segmentation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/Segmentation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Segmentation.cpp [ 76%] Building CXX object src/Mod/Image/Gui/CMakeFiles/ImageGui.dir/ImageView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DImageGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ImageGui.dir/ImageView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp [ 77%] Building CXX object src/Mod/Points/Gui/CMakeFiles/PointsGui.dir/Workbench.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPointsGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui -I/usr/include/Coin4 -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PointsGui.dir/Workbench.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Workbench.cpp [ 77%] Generating moc_TaskSweep.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_TaskSweep.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 77%] Building CXX object src/Mod/Drawing/Gui/CMakeFiles/DrawingGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawingGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/DrawingGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/PreCompiled.cpp [ 77%] Building CXX object src/Mod/Drawing/Gui/CMakeFiles/DrawingGui.dir/TaskDialog.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawingGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/DrawingGui.dir/TaskDialog.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.cpp:30: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.h:45:64: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 45 | RemoveComponents(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qpushbutton.h:43, from /usr/include/qt5/QtWidgets/QPushButton:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.h:81:70: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 81 | RemoveComponentsDialog(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qpushbutton.h:43, from /usr/include/qt5/QtWidgets/QPushButton:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp:45: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qpushbutton.h:43, from /usr/include/qt5/QtWidgets/QPushButton:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.cpp: In constructor 'MeshGui::RemoveComponentsDialog::RemoveComponentsDialog(QWidget*, Qt::WindowFlags)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.cpp:163:39: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 163 | widget = new RemoveComponents(this); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qpushbutton.h:43, from /usr/include/qt5/QtWidgets/QPushButton:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 77%] Generating moc_TaskThickness.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/moc_TaskThickness.cpp_parameters /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.cpp: In constructor 'MeshGui::TaskRemoveComponents::TaskRemoveComponents()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.cpp:212:35: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 212 | widget = new RemoveComponents(); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qpushbutton.h:43, from /usr/include/qt5/QtWidgets/QPushButton:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp:36: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp:36: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp:36: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp:36: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp: In member function 'virtual void CmdRaytracingWriteCamera::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp:137:148: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 137 | QString fn = Gui::FileDialog::getSaveFileName(Gui::getMainWindow(), QObject::tr("Export page"), QString(), filter.join(QLatin1String(";;"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp:36: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qcoreapplication.h:43, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:15: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qcoreapplication.h:43, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:15: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qcoreapplication.h:43, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:15: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp: In member function 'virtual void CmdRaytracingWritePart::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp:188:144: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 188 | QString fn = Gui::FileDialog::getSaveFileName(Gui::getMainWindow(), QObject::tr("Export page"), QString(), filter.join(QLatin1String(";;"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp:36: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp: In member function 'virtual void CmdRaytracingWriteView::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp:251:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 251 | QObject::tr("Export page"), QString(), filter.join(QLatin1String(";;"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp:36: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp: In member function 'virtual void CmdRaytracingExportProject::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp:550:144: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 550 | QString fn = Gui::FileDialog::getSaveFileName(Gui::getMainWindow(), QObject::tr("Export page"), QString(), filter.join(QLatin1String(";;"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp:36: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp: In member function 'virtual void CmdRaytracingRender::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp:662:151: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 662 | QString fn = Gui::FileDialog::getSaveFileName(Gui::getMainWindow(), QObject::tr("Rendered image"), QString(), filter.join(QLatin1String(";;"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Command.cpp:36: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 77%] Generating qrc_Part.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/rcc --name Part --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/qrc_Part.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Resources/Part.qrc In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qcoreapplication.h:43, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:15: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 77%] Generating ui_CrossSections.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_CrossSections.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.ui [ 77%] Generating ui_DlgBooleanOperation.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgBooleanOperation.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgBooleanOperation.ui [ 77%] Generating ui_DlgExtrusion.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgExtrusion.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgExtrusion.ui [ 77%] Generating ui_DlgFilletEdges.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgFilletEdges.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.ui [ 77%] Generating ui_DlgImportExportIges.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgImportExportIges.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgImportExportIges.ui [ 77%] Generating ui_DlgImportExportStep.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgImportExportStep.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgImportExportStep.ui [ 77%] Generating ui_DlgPartBox.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgPartBox.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartBox.ui In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:42: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 77%] Generating ui_DlgPartCylinder.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgPartCylinder.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinder.ui [ 78%] Generating ui_DlgPartImportIges.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgPartImportIges.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIges.ui [ 78%] Generating ui_DlgPartImportStep.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgPartImportStep.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStep.ui [ 78%] Generating ui_DlgPrimitives.h In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgPrimitives.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.ui [ 78%] Generating ui_DlgRevolution.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgRevolution.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.ui [ 78%] Generating ui_DlgSettings3DViewPart.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettings3DViewPart.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettings3DViewPart.ui [ 78%] Generating ui_DlgSettingsGeneral.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettingsGeneral.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsGeneral.ui [ 78%] Generating ui_DlgSettingsObjectColor.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettingsObjectColor.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.ui [ 78%] Generating ui_Location.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_Location.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Location.ui [ 78%] Generating ui_Mirroring.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_Mirroring.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Mirroring.ui [ 78%] Generating ui_TaskAttacher.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskAttacher.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskAttacher.ui [ 78%] Generating ui_TaskFaceColors.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskFaceColors.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.ui [ 78%] Generating ui_TaskLoft.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskLoft.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskLoft.ui [ 78%] Generating ui_TaskOffset.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskOffset.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskOffset.ui [ 78%] Generating ui_TaskShapeBuilder.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskShapeBuilder.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskShapeBuilder.ui [ 78%] Generating ui_TaskSweep.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskSweep.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskSweep.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/CMakeFiles/PartGui.dir/DependInfo.cmake --color= /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp: In member function 'virtual void CmdDrawingOpen::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:71:131: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 71 | QString filename = Gui::FileDialog::getOpenFileName(Gui::getMainWindow(), QObject::tr("Choose an SVG file to open"), QString::null, | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:15: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:71:131: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 71 | QString filename = Gui::FileDialog::getOpenFileName(Gui::getMainWindow(), QObject::tr("Choose an SVG file to open"), QString::null, | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:15: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/CMakeFiles/PartGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/CMakeFiles/PartGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/CMakeFiles/PartGui.dir/depend.internal". [ 78%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/SegmentationBestFit.cpp.o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:72:93: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 72 | QString::fromLatin1("%1 (*.svg *.svgz)").arg(QObject::tr("Scalable Vector Graphic"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qcoreapplication.h:43, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:15: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/SegmentationBestFit.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SegmentationBestFit.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp: In member function 'virtual void CmdDrawingSymbol::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:592:131: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 592 | QString filename = Gui::FileDialog::getOpenFileName(Gui::getMainWindow(), QObject::tr("Choose an SVG file to open"), QString::null, | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:15: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:592:131: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 592 | QString filename = Gui::FileDialog::getOpenFileName(Gui::getMainWindow(), QObject::tr("Choose an SVG file to open"), QString::null, | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:15: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:593:93: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 593 | QString::fromLatin1("%1 (*.svg *.svgz)").arg(QObject::tr("Scalable Vector Graphic"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qcoreapplication.h:43, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:15: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp: In member function 'virtual void CmdDrawingExportPage::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:653:144: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 653 | QString fn = Gui::FileDialog::getSaveFileName(Gui::getMainWindow(), QObject::tr("Export page"), QString(), filter.join(QLatin1String(";;"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qcoreapplication.h:43, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Command.cpp:15: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Workbench.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Points/Gui/Workbench.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Segmentation.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Segmentation.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp:20: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ Scanning dependencies of target PartGui gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Part/Gui/CMakeFiles/PartGui.dir/build.make src/Mod/Part/Gui/CMakeFiles/PartGui.dir/build In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/OpenGLImageBox.h:40:58: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 40 | GLImageBox(QWidget * parent = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp:20: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp: In constructor 'ImageGui::ImageView::ImageView(QWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp:40:48: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 40 | : MDIView(0, parent), _ignoreCloseEvent(false) | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp:20: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp:68:37: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 68 | _pGLImageBox = new GLImageBox(this); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp:20: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp: In member function 'virtual void ImageGui::ImageView::mouseMoveEvent(QMouseEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp:411:19: warning: 'static void QCoreApplication::flush()' is deprecated [-Wdeprecated-declarations] 411 | QApplication::flush(); | ^~~~~ In file included from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp:21: /usr/include/qt5/QtCore/qcoreapplication.h:169:31: note: declared here 169 | QT_DEPRECATED static void flush(); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp:411:25: warning: 'static void QCoreApplication::flush()' is deprecated [-Wdeprecated-declarations] 411 | QApplication::flush(); | ^ In file included from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp:21: /usr/include/qt5/QtCore/qcoreapplication.h:169:31: note: declared here 169 | QT_DEPRECATED static void flush(); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp: In member function 'virtual void ImageGui::ImageView::wheelEvent(QWheelEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp:477:30: warning: 'int QWheelEvent::x() const' is deprecated: Use position() [-Wdeprecated-declarations] 477 | int box_x = cEvent->x() - offset.x(); | ^ In file included from /usr/include/qt5/QtGui/QMouseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp:23: /usr/include/qt5/QtGui/qevent.h:229:16: note: declared here 229 | inline int x() const { return int(p.x()); } | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp:478:30: warning: 'int QWheelEvent::y() const' is deprecated: Use position() [-Wdeprecated-declarations] 478 | int box_y = cEvent->y() - offset.y(); | ^ In file included from /usr/include/qt5/QtGui/QMouseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp:23: /usr/include/qt5/QtGui/qevent.h:231:16: note: declared here 231 | inline int y() const { return int(p.y()); } | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp:481:37: warning: 'int QWheelEvent::delta() const' is deprecated: Use angleDelta() [-Wdeprecated-declarations] 481 | int numTicks = cEvent->delta() / 120; | ^ In file included from /usr/include/qt5/QtGui/QMouseEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/ImageView.cpp:23: /usr/include/qt5/QtGui/qevent.h:219:16: note: declared here 219 | inline int delta() const { return qt4D; } | ^~~~~ gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 78%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/qrc_Part.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/qrc_Part.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/qrc_Part.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Segmentation.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Segmentation.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Segmentation.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Segmentation.cpp:30: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Segmentation.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Segmentation.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Segmentation.h:40:81: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 40 | Segmentation(Mesh::Feature* mesh, QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qwidget.h:43, from /usr/include/qt5/QtWidgets/QWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Segmentation.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Segmentation.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Segmentation.cpp: In constructor 'MeshGui::TaskSegmentation::TaskSegmentation(Mesh::Feature*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Segmentation.cpp:150:35: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 150 | widget = new Segmentation(mesh); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qwidget.h:43, from /usr/include/qt5/QtWidgets/QWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Segmentation.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Segmentation.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 78%] Linking CXX shared library ../../../../Mod/Points/PointsGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Points/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/PointsGui.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,PointsGui.so -o ../../../../Mod/Points/PointsGui.so CMakeFiles/PointsGui.dir/DlgPointsReadImp.cpp.o CMakeFiles/PointsGui.dir/qrc_Points.cpp.o CMakeFiles/PointsGui.dir/AppPointsGui.cpp.o CMakeFiles/PointsGui.dir/Command.cpp.o CMakeFiles/PointsGui.dir/PreCompiled.cpp.o CMakeFiles/PointsGui.dir/ViewProvider.cpp.o CMakeFiles/PointsGui.dir/Workbench.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Points:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Points/Points.so ../../../../lib/libFreeCADGui.so /usr/lib64/libQt5Concurrent.so.5.15.2 ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 -lCoin /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5Widgets.so.5.15.2 -lpthread /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so [ 78%] Building CXX object src/Mod/Image/Gui/CMakeFiles/ImageGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DImageGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ImageGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/PreCompiled.cpp [ 78%] Building CXX object src/Mod/Image/Gui/CMakeFiles/ImageGui.dir/Workbench.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DImageGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ImageGui.dir/Workbench.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Workbench.cpp [ 78%] Building CXX object src/Mod/Raytracing/Gui/CMakeFiles/RaytracingGui.dir/DlgSettingsRayImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRaytracingGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RaytracingGui.dir/DlgSettingsRayImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.cpp [ 78%] Building CXX object src/Mod/Image/Gui/CMakeFiles/ImageGui.dir/OpenGLImageBox.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DImageGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ImageGui.dir/OpenGLImageBox.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/OpenGLImageBox.cpp [ 78%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/AppPartGui.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/AppPartGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/AppPartGui.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 78%] Built target PointsGui /usr/bin/gmake -f src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/build.make src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 78%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Resources/icons/RobotWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Resources/icons/RobotWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Resources/icons/RobotWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Robot/Resources/icons/RobotWorkbench.svg [ 78%] Generating moc_TaskDlgEdge2Trac.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/moc_TaskDlgEdge2Trac.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.cpp:33: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 78%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/Selection.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/Selection.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Selection.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/OpenGLImageBox.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/OpenGLImageBox.h:40:58: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 40 | GLImageBox(QWidget * parent = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qalgorithms.h:43, from /usr/include/qt5/QtCore/qdebug.h:44, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/OpenGLImageBox.cpp:22: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcheckbox.h:43, from /usr/include/qt5/QtWidgets/QCheckBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcheckbox.h:43, from /usr/include/qt5/QtWidgets/QCheckBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcheckbox.h:43, from /usr/include/qt5/QtWidgets/QCheckBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcheckbox.h:43, from /usr/include/qt5/QtWidgets/QCheckBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcheckbox.h:43, from /usr/include/qt5/QtWidgets/QCheckBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcheckbox.h:43, from /usr/include/qt5/QtWidgets/QCheckBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcheckbox.h:43, from /usr/include/qt5/QtWidgets/QCheckBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qcheckbox.h:43, from /usr/include/qt5/QtWidgets/QCheckBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskDialog.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/ui_DlgSettingsRay.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/ui_DlgSettingsRay.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/ui_DlgSettingsRay.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/ui_DlgSettingsRay.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/ui_DlgSettingsRay.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/ui_DlgSettingsRay.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /usr/bin/gmake -f src/Mod/ReverseEngineering/Gui/CMakeFiles/ReverseEngineeringGui.dir/build.make src/Mod/ReverseEngineering/Gui/CMakeFiles/ReverseEngineeringGui.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 78%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Resources/icons/ReverseEngineeringWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/ReverseEngineering/Resources/icons/ReverseEngineeringWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Resources/icons/ReverseEngineeringWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/ReverseEngineering/Resources/icons/ReverseEngineeringWorkbench.svg [ 78%] Generating moc_FitBSplineSurface.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui/moc_FitBSplineSurface.cpp_parameters [ 78%] Generating moc_TaskDlgSimulate.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/moc_TaskDlgSimulate.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SegmentationBestFit.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SegmentationBestFit.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/ui_DlgSettingsRay.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/ui_DlgSettingsRay.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/ui_DlgSettingsRay.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui/ui_DlgSettingsRay.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/DlgSettingsRayImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SegmentationBestFit.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SegmentationBestFit.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SegmentationBestFit.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SegmentationBestFit.cpp:35: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SegmentationBestFit.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SegmentationBestFit.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SegmentationBestFit.h:82:88: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 82 | SegmentationBestFit(Mesh::Feature* mesh, QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialog.h:43, from /usr/include/qt5/QtWidgets/QDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SegmentationBestFit.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Workbench.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Image/Gui/Workbench.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SegmentationBestFit.cpp: In constructor 'MeshGui::TaskSegmentationBestFit::TaskSegmentationBestFit(Mesh::Feature*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SegmentationBestFit.cpp:471:42: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 471 | widget = new SegmentationBestFit(mesh); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialog.h:43, from /usr/include/qt5/QtWidgets/QDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SegmentationBestFit.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 78%] Building CXX object src/Mod/Drawing/Gui/CMakeFiles/DrawingGui.dir/TaskOrthoViews.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawingGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/DrawingGui.dir/TaskOrthoViews.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskOrthoViews.cpp [ 78%] Generating moc_Poisson.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui/moc_Poisson.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/AppPartGui.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.h:115:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 115 | DlgPreferencesImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/AppPartGui.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/AppPartGui.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.h:54:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 54 | DlgCustomizeImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/AppPartGui.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 78%] Generating moc_TaskDlgTrajectoryCompound.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/moc_TaskDlgTrajectoryCompound.cpp_parameters [ 78%] Building CXX object src/Mod/Raytracing/Gui/CMakeFiles/RaytracingGui.dir/PovrayHighlighter.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRaytracingGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RaytracingGui.dir/PovrayHighlighter.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/PovrayHighlighter.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/AppPartGui.cpp:26: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 78%] Linking CXX shared library ../../../../Mod/Image/ImageGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Image/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/ImageGui.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,ImageGui.so -o ../../../../Mod/Image/ImageGui.so CMakeFiles/ImageGui.dir/qrc_Image.cpp.o CMakeFiles/ImageGui.dir/AppImageGui.cpp.o CMakeFiles/ImageGui.dir/AppImageGuiPy.cpp.o CMakeFiles/ImageGui.dir/Command.cpp.o CMakeFiles/ImageGui.dir/ImageOrientationDialog.cpp.o CMakeFiles/ImageGui.dir/ViewProviderImagePlane.cpp.o CMakeFiles/ImageGui.dir/ImageView.cpp.o CMakeFiles/ImageGui.dir/PreCompiled.cpp.o CMakeFiles/ImageGui.dir/Workbench.cpp.o CMakeFiles/ImageGui.dir/OpenGLImageBox.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Image:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Image/Image.so ../../../../lib/libFreeCADGui.so /usr/lib64/libGLU.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 -lCoin /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5Widgets.so.5.15.2 -lpthread /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so [ 78%] Generating qrc_ReverseEngineering.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui && /usr/lib64/qt5/bin/rcc --name ReverseEngineering --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui/qrc_ReverseEngineering.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Resources/ReverseEngineering.qrc [ 78%] Generating ui_FitBSplineSurface.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui/ui_FitBSplineSurface.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.ui [ 78%] Generating ui_Poisson.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui/ui_Poisson.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Poisson.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui/CMakeFiles/ReverseEngineeringGui.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui/CMakeFiles/ReverseEngineeringGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui/CMakeFiles/ReverseEngineeringGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui/CMakeFiles/ReverseEngineeringGui.dir/depend.internal". Scanning dependencies of target ReverseEngineeringGui gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/ReverseEngineering/Gui/CMakeFiles/ReverseEngineeringGui.dir/build.make src/Mod/ReverseEngineering/Gui/CMakeFiles/ReverseEngineeringGui.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 78%] Building CXX object src/Mod/ReverseEngineering/Gui/CMakeFiles/ReverseEngineeringGui.dir/qrc_ReverseEngineering.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DReverseEngineeringGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ReverseEngineeringGui.dir/qrc_ReverseEngineering.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui/qrc_ReverseEngineering.cpp [ 78%] Building CXX object src/Mod/ReverseEngineering/Gui/CMakeFiles/ReverseEngineeringGui.dir/FitBSplineSurface.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DReverseEngineeringGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ReverseEngineeringGui.dir/FitBSplineSurface.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskOrthoViews.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskOrthoViews.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskOrthoViews.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskOrthoViews.cpp:28: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 78%] Built target ImageGui /usr/bin/gmake -f src/Mod/Web/Gui/CMakeFiles/WebGui.dir/build.make src/Mod/Web/Gui/CMakeFiles/WebGui.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 78%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/Resources/icons/WebWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Web/Resources/icons/WebWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/Resources/icons/WebWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Web/Resources/icons/WebWorkbench.svg [ 78%] Generating moc_BrowserView.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui/moc_BrowserView.cpp_parameters [ 78%] Generating moc_TaskDlgTrajectoryDressUp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/moc_TaskDlgTrajectoryDressUp.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/PropertyEnumAttacherItem.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/AppPartGui.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/AppPartGui.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/PropertyEnumAttacherItem.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/AppPartGui.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/AppPartGui.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 78%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/SoFCIndexedFaceSet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/SoFCIndexedFaceSet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SoFCIndexedFaceSet.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Selection.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Selection.cpp:27: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/Coin4/Inventor/C/glue/gl.h:42, from /usr/include/Coin4/Inventor/elements/SoGLLazyElement.h:37, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SoFCIndexedFaceSet.cpp:46: /usr/include/Coin4/Inventor/system/gl.h:45: warning: "GL_GLEXT_PROTOTYPES" redefined 45 | #define GL_GLEXT_PROTOTYPES 1 | /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SoFCIndexedFaceSet.cpp:27: note: this is the location of the previous definition 27 | #define GL_GLEXT_PROTOTYPES | [ 78%] Building CXX object src/Mod/Raytracing/Gui/CMakeFiles/RaytracingGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRaytracingGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RaytracingGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/PreCompiled.cpp [ 78%] Building CXX object src/Mod/Raytracing/Gui/CMakeFiles/RaytracingGui.dir/ViewProvider.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRaytracingGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RaytracingGui.dir/ViewProvider.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/ViewProvider.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskAttacher.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/PropertyEnumAttacherItem.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/AppPartGui.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/PropertyEnumAttacherItem.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/AppPartGui.cpp:33: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Selection.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Selection.cpp:27: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Selection.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Selection.cpp:27: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettingsObjectColor.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/AppPartGui.cpp:65: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/AppPartGui.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettingsObjectColor.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/AppPartGui.cpp:65: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/AppPartGui.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettingsObjectColor.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/AppPartGui.cpp:65: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/AppPartGui.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskOrthoViews.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/TaskOrthoViews.cpp:28: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 78%] Generating moc_TaskEdge2TracParameter.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/moc_TaskEdge2TracParameter.cpp_parameters [ 78%] Generating moc_CookieJar.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui/moc_CookieJar.cpp_parameters [ 78%] Generating qrc_Web.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui && /usr/lib64/qt5/bin/rcc --name Web --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui/qrc_Web.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/Resources/Web.qrc cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui/CMakeFiles/WebGui.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui/CMakeFiles/WebGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui/CMakeFiles/WebGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui/CMakeFiles/WebGui.dir/depend.internal". Scanning dependencies of target WebGui gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Web/Gui/CMakeFiles/WebGui.dir/build.make src/Mod/Web/Gui/CMakeFiles/WebGui.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 78%] Building CXX object src/Mod/Web/Gui/CMakeFiles/WebGui.dir/qrc_Web.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -DWebGui_EXPORTS -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtWebKitWidgets -isystem /usr/include/qt5/QtWebKit -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/WebGui.dir/qrc_Web.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui/qrc_Web.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SoFCIndexedFaceSet.cpp: In member function 'void MeshGui::SoFCIndexedFaceSet::startSelection(SoAction*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SoFCIndexedFaceSet.cpp:928:67: warning: implicitly-declared 'constexpr SbMatrix::SbMatrix(const SbMatrix&)' is deprecated [-Wdeprecated-copy] 928 | SbMatrix view = SoViewingMatrixElement::get(action->getState()); | ^ In file included from /usr/include/Coin4/Inventor/elements/SoProjectionMatrixElement.h:37, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SoFCIndexedFaceSet.cpp:49: /usr/include/Coin4/Inventor/SbMatrix.h:113:14: note: because 'SbMatrix' has user-provided 'SbMatrix& SbMatrix::operator=(const SbMatrix&)' 113 | SbMatrix & operator =(const SbMatrix & m); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SoFCIndexedFaceSet.cpp:929:70: warning: implicitly-declared 'constexpr SbMatrix::SbMatrix(const SbMatrix&)' is deprecated [-Wdeprecated-copy] 929 | SbMatrix proj = SoProjectionMatrixElement::get(action->getState()); | ^ In file included from /usr/include/Coin4/Inventor/elements/SoProjectionMatrixElement.h:37, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SoFCIndexedFaceSet.cpp:49: /usr/include/Coin4/Inventor/SbMatrix.h:113:14: note: because 'SbMatrix' has user-provided 'SbMatrix& SbMatrix::operator=(const SbMatrix&)' 113 | SbMatrix & operator =(const SbMatrix & m); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SoFCIndexedFaceSet.cpp: In member function 'void MeshGui::SoFCIndexedFaceSet::startVisibility(SoAction*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SoFCIndexedFaceSet.cpp:1012:67: warning: implicitly-declared 'constexpr SbMatrix::SbMatrix(const SbMatrix&)' is deprecated [-Wdeprecated-copy] 1012 | SbMatrix view = SoViewingMatrixElement::get(action->getState()); | ^ In file included from /usr/include/Coin4/Inventor/elements/SoProjectionMatrixElement.h:37, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SoFCIndexedFaceSet.cpp:49: /usr/include/Coin4/Inventor/SbMatrix.h:113:14: note: because 'SbMatrix' has user-provided 'SbMatrix& SbMatrix::operator=(const SbMatrix&)' 113 | SbMatrix & operator =(const SbMatrix & m); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SoFCIndexedFaceSet.cpp:1013:70: warning: implicitly-declared 'constexpr SbMatrix::SbMatrix(const SbMatrix&)' is deprecated [-Wdeprecated-copy] 1013 | SbMatrix proj = SoProjectionMatrixElement::get(action->getState()); | ^ In file included from /usr/include/Coin4/Inventor/elements/SoProjectionMatrixElement.h:37, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SoFCIndexedFaceSet.cpp:49: /usr/include/Coin4/Inventor/SbMatrix.h:113:14: note: because 'SbMatrix' has user-provided 'SbMatrix& SbMatrix::operator=(const SbMatrix&)' 113 | SbMatrix & operator =(const SbMatrix & m); | ^~~~~~~~ [ 78%] Building CXX object src/Mod/Web/Gui/CMakeFiles/WebGui.dir/AppWebGui.cpp.o [ 78%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/SoFCMeshObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -DWebGui_EXPORTS -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtWebKitWidgets -isystem /usr/include/qt5/QtWebKit -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/WebGui.dir/AppWebGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/AppWebGui.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/SoFCMeshObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SoFCMeshObject.cpp /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui/ui_FitBSplineSurface.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui/ui_FitBSplineSurface.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 78%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/AttacherTexts.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/AttacherTexts.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/AttacherTexts.cpp [ 78%] Generating moc_TaskRobot6Axis.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/moc_TaskRobot6Axis.cpp_parameters [ 78%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/SoPolygon.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/SoPolygon.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SoPolygon.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui/ui_FitBSplineSurface.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui/ui_FitBSplineSurface.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui/ui_FitBSplineSurface.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui/ui_FitBSplineSurface.h:16, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.cpp:31: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 78%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/qrc_Mesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/qrc_Mesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/qrc_Mesh.cpp [ 78%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/ViewProvider.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/ViewProvider.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp [ 78%] Generating moc_TaskRobotControl.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/moc_TaskRobotControl.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObjectGroup.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/ViewProvider.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui/ui_FitBSplineSurface.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.cpp:31: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/ViewProvider.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/ViewProvider.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/AppWebGui.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 79%] Generating moc_TaskRobotMessages.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/moc_TaskRobotMessages.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/BrowserView.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/AppWebGui.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmdiarea.h:43, from /usr/include/qt5/QtWidgets/QMdiArea:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/AppWebGui.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/Attacher.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/AttacherTexts.h:37, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/AttacherTexts.cpp:27: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 79%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/ViewProviderPython.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/ViewProviderPython.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderPython.cpp [ 79%] Building CXX object src/Mod/Drawing/Gui/CMakeFiles/DrawingGui.dir/Workbench.cpp.o [ 79%] Building CXX object src/Mod/Raytracing/Gui/CMakeFiles/RaytracingGui.dir/Workbench.cpp.o [ 79%] Building CXX object src/Mod/ReverseEngineering/Gui/CMakeFiles/ReverseEngineeringGui.dir/Poisson.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRaytracingGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RaytracingGui.dir/Workbench.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Workbench.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawingGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/DrawingGui.dir/Workbench.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Workbench.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DReverseEngineeringGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ReverseEngineeringGui.dir/Poisson.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Poisson.cpp [ 79%] Generating moc_TaskTrajectory.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/moc_TaskTrajectory.cpp_parameters [ 79%] Building CXX object src/Mod/Web/Gui/CMakeFiles/WebGui.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -DWebGui_EXPORTS -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtWebKitWidgets -isystem /usr/include/qt5/QtWebKit -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/WebGui.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/Command.cpp [ 79%] Generating moc_TaskTrajectoryDressUpParameter.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/moc_TaskTrajectoryDressUpParameter.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:61: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 79%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/BoxSelection.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/BoxSelection.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/BoxSelection.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:70: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:81: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:82: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:82: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:82: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:82: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:82: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:82: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Poisson.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Poisson.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui/ui_Poisson.h:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Poisson.cpp:31: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:61: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderPythonFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderPython.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderPython.cpp:25: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:78: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Utilities.h: In copy constructor 'Gui::ViewVolumeProjection::ViewVolumeProjection(const Gui::ViewVolumeProjection&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Utilities.h:96:17: warning: implicitly-declared 'constexpr SbMatrix::SbMatrix(const SbMatrix&)' is deprecated [-Wdeprecated-copy] 96 | class GuiExport ViewVolumeProjection : public Base::ViewProjMethod | ^~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/Coin4/Inventor/nodes/SoShape.h:38, from /usr/include/Coin4/Inventor/nodes/SoVertexShape.h:37, from /usr/include/Coin4/Inventor/nodes/SoIndexedShape.h:37, from /usr/include/Coin4/Inventor/nodes/SoIndexedFaceSet.h:37, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:43: /usr/include/Coin4/Inventor/SbMatrix.h:113:14: note: because 'SbMatrix' has user-provided 'SbMatrix& SbMatrix::operator=(const SbMatrix&)' 113 | SbMatrix & operator =(const SbMatrix & m); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:78: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Utilities.h:96:17: warning: implicitly-declared 'constexpr SbMatrix::SbMatrix(const SbMatrix&)' is deprecated [-Wdeprecated-copy] 96 | class GuiExport ViewVolumeProjection : public Base::ViewProjMethod | ^~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/Coin4/Inventor/nodes/SoShape.h:38, from /usr/include/Coin4/Inventor/nodes/SoVertexShape.h:37, from /usr/include/Coin4/Inventor/nodes/SoIndexedShape.h:37, from /usr/include/Coin4/Inventor/nodes/SoIndexedFaceSet.h:37, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:43: /usr/include/Coin4/Inventor/SbMatrix.h:113:14: note: because 'SbMatrix' has user-provided 'SbMatrix& SbMatrix::operator=(const SbMatrix&)' 113 | SbMatrix & operator =(const SbMatrix & m); | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp: In constructor 'MeshGui::MeshSplit::MeshSplit(MeshGui::ViewProviderMesh*, const std::vector&, const Gui::ViewVolumeProjection&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.cpp:826:20: note: synthesized method 'Gui::ViewVolumeProjection::ViewVolumeProjection(const Gui::ViewVolumeProjection&)' first required here 826 | , proj(proj) | ^ [ 79%] Generating moc_TaskWatcher.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/moc_TaskWatcher.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Workbench.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/Workbench.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Workbench.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Raytracing/Gui/Workbench.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Poisson.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Poisson.cpp:32: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/Command.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/Command.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/Command.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 79%] Generating moc_TrajectorySimulate.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/moc_TrajectorySimulate.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Poisson.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Poisson.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/Command.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 79%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/ViewProviderCurvature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/ViewProviderCurvature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderCurvature.cpp [ 79%] Linking CXX shared library ../../../../Mod/Raytracing/RaytracingGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Raytracing/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/RaytracingGui.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,RaytracingGui.so -o ../../../../Mod/Raytracing/RaytracingGui.so CMakeFiles/RaytracingGui.dir/qrc_Raytracing.cpp.o CMakeFiles/RaytracingGui.dir/AppRaytracingGui.cpp.o CMakeFiles/RaytracingGui.dir/AppRaytracingGuiPy.cpp.o CMakeFiles/RaytracingGui.dir/Command.cpp.o CMakeFiles/RaytracingGui.dir/DlgSettingsRayImp.cpp.o CMakeFiles/RaytracingGui.dir/PovrayHighlighter.cpp.o CMakeFiles/RaytracingGui.dir/PreCompiled.cpp.o CMakeFiles/RaytracingGui.dir/ViewProvider.cpp.o CMakeFiles/RaytracingGui.dir/Workbench.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Raytracing:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part: -lmpi_cxx -lmpi ../../../../Mod/Raytracing/Raytracing.so ../../../../lib/libFreeCADGui.so ../../../../Mod/Part/Part.so /usr/lib64/libfreetype.so /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 -lCoin /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5Widgets.so.5.15.2 -lpthread /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so [ 79%] Building CXX object src/Mod/Drawing/Gui/CMakeFiles/DrawingGui.dir/DrawingView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawingGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/DrawingGui.dir/DrawingView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/BrowserView.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/Command.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 80%] Building CXX object src/Mod/ReverseEngineering/Gui/CMakeFiles/ReverseEngineeringGui.dir/AppReverseEngineeringGui.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DReverseEngineeringGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ReverseEngineeringGui.dir/AppReverseEngineeringGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/AppReverseEngineeringGui.cpp [ 80%] Generating qrc_Robot.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/lib64/qt5/bin/rcc --name Robot --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/qrc_Robot.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Resources/Robot.qrc gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 80%] Built target RaytracingGui /usr/bin/gmake -f src/Mod/Start/Gui/CMakeFiles/StartGui.dir/build.make src/Mod/Start/Gui/CMakeFiles/StartGui.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 80%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Resources/icons/StartWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/Resources/icons/StartWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Resources/icons/StartWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Start/Resources/icons/StartWorkbench.svg [ 80%] Generating moc_DlgStartPreferencesImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/moc_DlgStartPreferencesImp.cpp_parameters [ 80%] Generating ui_TaskEdge2TracParameter.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/ui_TaskEdge2TracParameter.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskEdge2TracParameter.ui [ 80%] Generating qrc_Start.cpp [ 80%] Generating ui_TaskRobot6Axis.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/ui_TaskRobot6Axis.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui && /usr/lib64/qt5/bin/rcc --name Start --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/qrc_Start.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Resources/Start.qrc [ 80%] Generating ui_TaskRobotControl.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/ui_TaskRobotControl.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotControl.ui [ 80%] Generating ui_TaskRobotMessages.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/ui_TaskRobotMessages.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotMessages.ui [ 80%] Generating ui_TaskTrajectory.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/ui_TaskTrajectory.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectory.ui [ 80%] Generating ui_DlgStartPreferences.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/ui_DlgStartPreferences.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferences.ui [ 80%] Generating ui_TaskTrajectoryDressUpParameter.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/CMakeFiles/StartGui.dir/DependInfo.cmake --color= cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/ui_TaskTrajectoryDressUpParameter.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.ui Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/CMakeFiles/StartGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/CMakeFiles/StartGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/CMakeFiles/StartGui.dir/depend.internal". [ 80%] Generating ui_TrajectorySimulate.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/ui_TrajectorySimulate.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TrajectorySimulate.ui In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/BoxSelection.cpp:49: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/depend.internal". Scanning dependencies of target StartGui gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Start/Gui/CMakeFiles/StartGui.dir/build.make src/Mod/Start/Gui/CMakeFiles/StartGui.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 80%] Building CXX object src/Mod/Start/Gui/CMakeFiles/StartGui.dir/qrc_Start.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DStartGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/StartGui.dir/qrc_Start.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/qrc_Start.cpp Scanning dependencies of target RobotGui gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/build.make src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 80%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/qrc_Robot.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/qrc_Robot.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/qrc_Robot.cpp [ 80%] Building CXX object src/Mod/Web/Gui/CMakeFiles/WebGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -DWebGui_EXPORTS -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtWebKitWidgets -isystem /usr/include/qt5/QtWebKit -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/WebGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/PreCompiled.cpp [ 80%] Building CXX object src/Mod/Start/Gui/CMakeFiles/StartGui.dir/DlgStartPreferencesImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DStartGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/StartGui.dir/DlgStartPreferencesImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.cpp [ 80%] Building CXX object src/Mod/Web/Gui/CMakeFiles/WebGui.dir/Workbench.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -DWebGui_EXPORTS -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtWebKitWidgets -isystem /usr/include/qt5/QtWebKit -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/WebGui.dir/Workbench.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/Workbench.cpp [ 80%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/AppRobotGui.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/AppRobotGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/AppRobotGui.cpp [ 80%] Building CXX object src/Mod/Start/Gui/CMakeFiles/StartGui.dir/AppStartGui.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DStartGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/StartGui.dir/AppStartGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/AppStartGui.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/BoxSelection.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontmetrics.h:43, from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/BoxSelection.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/BoxSelection.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontmetrics.h:43, from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/BoxSelection.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/BoxSelection.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontmetrics.h:43, from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/BoxSelection.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/BoxSelection.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontmetrics.h:43, from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/BoxSelection.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/BoxSelection.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontmetrics.h:43, from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/BoxSelection.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/BoxSelection.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontmetrics.h:43, from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/BoxSelection.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/BoxSelection.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontmetrics.h:43, from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/BoxSelection.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/BoxSelection.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontmetrics.h:43, from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/BoxSelection.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/ui_DlgStartPreferences.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/ui_DlgStartPreferences.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/ui_DlgStartPreferences.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/ui_DlgStartPreferences.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/ui_DlgStartPreferences.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/ui_DlgStartPreferences.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Annotation.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderCurvature.cpp:57: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/ui_DlgStartPreferences.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/ui_DlgStartPreferences.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/ui_DlgStartPreferences.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/ui_DlgStartPreferences.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderCurvature.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qcoreevent.h:43, from /usr/include/qt5/QtCore/QEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderCurvature.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:56: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 80%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderCurvature.cpp:68: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qcoreevent.h:43, from /usr/include/qt5/QtCore/QEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderCurvature.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderCurvature.cpp:68: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qcoreevent.h:43, from /usr/include/qt5/QtCore/QEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderCurvature.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderCurvature.cpp:68: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qcoreevent.h:43, from /usr/include/qt5/QtCore/QEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderCurvature.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/AppReverseEngineeringGui.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderCurvature.cpp:68: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qcoreevent.h:43, from /usr/include/qt5/QtCore/QEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderCurvature.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderCurvature.cpp:68: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qcoreevent.h:43, from /usr/include/qt5/QtCore/QEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderCurvature.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderCurvature.cpp:68: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qcoreevent.h:43, from /usr/include/qt5/QtCore/QEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderCurvature.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderCurvature.cpp:70: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qcoreevent.h:43, from /usr/include/qt5/QtCore/QEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderCurvature.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderCurvature.cpp:70: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qcoreevent.h:43, from /usr/include/qt5/QtCore/QEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderCurvature.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/Workbench.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/Workbench.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp: In member function 'virtual void DrawingGui::SvgView::wheelEvent(QWheelEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:200:31: warning: 'int QWheelEvent::delta() const' is deprecated: Use angleDelta() [-Wdeprecated-declarations] 200 | int delta = -event->delta(); | ^ In file included from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:29: /usr/include/qt5/QtGui/qevent.h:219:16: note: declared here 219 | inline int delta() const { return qt4D; } | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp: In constructor 'DrawingGui::DrawingView::DrawingView(Gui::Document*, QWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:213:50: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 213 | : Gui::MDIView(doc, parent), m_view(new SvgView) | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp: In member function 'virtual void DrawingGui::DrawingView::printPdf()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:466:39: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 466 | Gui::FileOptionsDialog dlg(this, 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:516:45: warning: 'void QPrinter::setOrientation(QPrinter::Orientation)' is deprecated: Use setPageOrientation() instead. [-Wdeprecated-declarations] 516 | printer.setOrientation(m_orientation); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:43: /usr/include/qt5/QtPrintSupport/qprinter.h:172:10: note: declared here 172 | void setOrientation(Orientation); | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:520:56: warning: 'void QPrinter::setPaperSize(QPrinter::PaperSize)' is deprecated: Use setPageSize(QPageSize) instead. [-Wdeprecated-declarations] 520 | printer.setPaperSize(QPrinter::PageSize(AX)); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:43: /usr/include/qt5/QtPrintSupport/qprinter.h:185:10: note: declared here 185 | void setPaperSize(PaperSize); | ^~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp: In member function 'virtual void DrawingGui::DrawingView::print()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:531:35: warning: 'virtual void QPrinter::setPageSize(QPagedPaintDevice::PageSize)' is deprecated: Use setPageSize(QPageSize) instead. [-Wdeprecated-declarations] 531 | printer.setPageSize(m_pageSize); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:43: /usr/include/qt5/QtPrintSupport/qprinter.h:177:10: note: declared here 177 | void setPageSize(PageSize) override; | ^~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:532:41: warning: 'void QPrinter::setOrientation(QPrinter::Orientation)' is deprecated: Use setPageOrientation() instead. [-Wdeprecated-declarations] 532 | printer.setOrientation(m_orientation); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:43: /usr/include/qt5/QtPrintSupport/qprinter.h:172:10: note: declared here 172 | void setOrientation(Orientation); | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp: In member function 'virtual void DrawingGui::DrawingView::printPreview()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:544:35: warning: 'virtual void QPrinter::setPageSize(QPagedPaintDevice::PageSize)' is deprecated: Use setPageSize(QPageSize) instead. [-Wdeprecated-declarations] 544 | printer.setPageSize(m_pageSize); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:43: /usr/include/qt5/QtPrintSupport/qprinter.h:177:10: note: declared here 177 | void setPageSize(PageSize) override; | ^~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:545:41: warning: 'void QPrinter::setOrientation(QPrinter::Orientation)' is deprecated: Use setPageOrientation() instead. [-Wdeprecated-declarations] 545 | printer.setOrientation(m_orientation); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:43: /usr/include/qt5/QtPrintSupport/qprinter.h:172:10: note: declared here 172 | void setOrientation(Orientation); | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp: In member function 'virtual void DrawingGui::DrawingView::print(QPrinter*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:571:63: warning: 'QPrinter::PaperSize QPrinter::paperSize() const' is deprecated: pageLayout().pageSize().id() [-Wdeprecated-declarations] 571 | QPrinter::PaperSize curPaperSize = printer->paperSize(); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:43: /usr/include/qt5/QtPrintSupport/qprinter.h:187:15: note: declared here 187 | PaperSize paperSize() const; | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:577:45: warning: 'QPrinter::Orientation QPrinter::orientation() const' is deprecated: Use pageLayout().orientation() instead. [-Wdeprecated-declarations] 577 | if (doPrint && printer->orientation() != this->m_orientation) { | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:43: /usr/include/qt5/QtPrintSupport/qprinter.h:174:17: note: declared here 174 | Orientation orientation() const; | ^~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:611:37: warning: 'QRect QPrinter::paperRect() const' is deprecated: Use pageLayout().fullRectPixels(resolution()) instead. [-Wdeprecated-declarations] 611 | QRect rect = printer->paperRect(); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.cpp:43: /usr/include/qt5/QtPrintSupport/qprinter.h:257:11: note: declared here 257 | QRect paperRect() const; | ^~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/AppRobotGui.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/AppStartGui.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 80%] Building CXX object src/Mod/Start/Gui/CMakeFiles/StartGui.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DStartGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/StartGui.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/AppStartGui.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.h:115:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 115 | DlgPreferencesImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/AppStartGui.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/AppStartGui.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.h:54:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 54 | DlgCustomizeImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/AppStartGui.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 80%] Building CXX object src/Mod/ReverseEngineering/Gui/CMakeFiles/ReverseEngineeringGui.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DReverseEngineeringGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ReverseEngineeringGui.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Command.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/ui_DlgStartPreferences.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/AppStartGui.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/AppStartGui.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/ui_DlgStartPreferences.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/AppStartGui.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/AppStartGui.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/ui_DlgStartPreferences.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/AppStartGui.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/AppStartGui.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/ui_DlgStartPreferences.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/AppStartGui.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/AppStartGui.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui/ui_DlgStartPreferences.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/DlgStartPreferencesImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/AppStartGui.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/AppStartGui.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 80%] Building CXX object src/Mod/Drawing/Gui/CMakeFiles/DrawingGui.dir/ViewProviderPage.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawingGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/DrawingGui.dir/ViewProviderPage.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/ViewProviderPage.cpp [ 80%] Building CXX object src/Mod/Web/Gui/CMakeFiles/WebGui.dir/BrowserView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -DWebGui_EXPORTS -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtWebKitWidgets -isystem /usr/include/qt5/QtWebKit -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/WebGui.dir/BrowserView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/BrowserView.cpp [ 80%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/ViewProviderDefects.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/ViewProviderDefects.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderDefects.cpp [ 80%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/PreCompiled.cpp [ 80%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/Workbench.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/Workbench.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Workbench.cpp [ 81%] Building CXX object src/Mod/Start/Gui/CMakeFiles/StartGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DStartGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/StartGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/PreCompiled.cpp [ 81%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/CommandSimple.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/CommandSimple.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CommandSimple.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:43: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qcoreapplication.h:43, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qcoreapplication.h:43, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qcoreapplication.h:43, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp: In member function 'virtual void CmdStartPage::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:69:35: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 69 | str << "import WebGui" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:69:35: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 69 | str << "import WebGui" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:70:53: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 70 | str << "from StartPage import StartPage" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:70:53: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 70 | str << "from StartPage import StartPage" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:71:16: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 71 | str << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:71:16: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 71 | str << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:72:44: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 72 | str << "class WebPage(object):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:72:44: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 72 | str << "class WebPage(object):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:73:45: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 73 | str << " def __init__(self):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:73:45: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 73 | str << " def __init__(self):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:74:90: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 74 | str << " self.browser=WebGui.openBrowserWindow('" << utf8Title << "')" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:74:90: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 74 | str << " self.browser=WebGui.openBrowserWindow('" << utf8Title << "')" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:78:129: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 78 | str << " self.browser.setHtml(StartPage.handle(), 'file://' + App.getResourceDir() + 'Mod/Start/StartPage/')" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:78:129: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 78 | str << " self.browser.setHtml(StartPage.handle(), 'file://' + App.getResourceDir() + 'Mod/Start/StartPage/')" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:80:58: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 80 | str << " def onChange(self, par, reason):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:80:58: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 80 | str << " def onChange(self, par, reason):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:81:57: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 81 | str << " if reason == 'RecentFiles':" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:81:57: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 81 | str << " if reason == 'RecentFiles':" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:85:133: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 85 | str << " self.browser.setHtml(StartPage.handle(), 'file://' + App.getResourceDir() + 'Mod/Start/StartPage/')" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:85:133: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 85 | str << " self.browser.setHtml(StartPage.handle(), 'file://' + App.getResourceDir() + 'Mod/Start/StartPage/')" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:87:16: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 87 | str << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:87:16: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 87 | str << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:88:44: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 88 | str << "class WebView(object):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:88:44: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 88 | str << "class WebView(object):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:89:45: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 89 | str << " def __init__(self):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:89:45: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 89 | str << " def __init__(self):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:90:110: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 90 | str << " self.pargrp = FreeCAD.ParamGet('User parameter:BaseApp/Preferences/RecentFiles')" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:90:110: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 90 | str << " self.pargrp = FreeCAD.ParamGet('User parameter:BaseApp/Preferences/RecentFiles')" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:91:54: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 91 | str << " self.webPage = WebPage()" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:91:54: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 91 | str << " self.webPage = WebPage()" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:92:62: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 92 | str << " self.pargrp.Attach(self.webPage)" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:92:62: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 92 | str << " self.pargrp.Attach(self.webPage)" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:93:44: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 93 | str << " def __del__(self):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:93:44: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 93 | str << " def __del__(self):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:94:62: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 94 | str << " self.pargrp.Detach(self.webPage)" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:94:62: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 94 | str << " self.pargrp.Detach(self.webPage)" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:95:16: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 95 | str << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:95:16: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 95 | str << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:96:39: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 96 | str << "webView=WebView()" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:96:39: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 96 | str << "webView=WebView()" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 81%] Building CXX object src/Mod/Start/Gui/CMakeFiles/StartGui.dir/Workbench.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DStartGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/StartGui.dir/Workbench.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:55: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.h:36:67: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 36 | DlgPartImportStepImp( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgBooleanOperation.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgBooleanOperation.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:62: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgExtrusion.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgExtrusion.h:42:60: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 42 | DlgExtrusion(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Command.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:64: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:64: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:64: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:84:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | LocationDialog(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:64: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.h:39:61: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 39 | DlgRevolution(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:65: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.h:84:98: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | DlgFilletEdges(FilletType type, Part::FilletBase*, QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:65: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.h:124:124: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 124 | FilletEdgesDialog(DlgFilletEdges::FilletType type, Part::FilletBase* fillet, QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:65: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.h:137:82: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 137 | DlgChamferEdges(Part::FilletBase*, QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:67: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.h:47:89: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 47 | CrossSections(const Base::BoundBox3d& bb, QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp: In member function 'virtual void CmdPartImport::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:1010:136: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 1010 | QString fn = Gui::FileDialog::getOpenFileName(Gui::getMainWindow(), QString(), QString(), filter.join(QLatin1String(";;")), &select); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp: In member function 'virtual void CmdPartExport::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:1070:136: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 1070 | QString fn = Gui::FileDialog::getSaveFileName(Gui::getMainWindow(), QString(), QString(), filter.join(QLatin1String(";;")), &select); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp: In member function 'virtual void CmdPartImportCurveNet::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:1118:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 1118 | QString fn = Gui::FileDialog::getOpenFileName(Gui::getMainWindow(), QString(), QString(), filter.join(QLatin1String(";;"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderDefects.cpp:42: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/ViewProviderPage.cpp:37: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Command.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Command.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Command.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Command.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Command.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Command.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Command.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Command.cpp:47: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Workbench.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Workbench.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/DrawingView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/ViewProviderPage.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/ViewProviderPage.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/ViewProviderPage.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Workbench.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Workbench.cpp:40: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskWatcher.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Workbench.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskWatcher.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Workbench.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskWatcher.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Workbench.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/BrowserView.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/BrowserView.cpp:57: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CommandSimple.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/BrowserView.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/BrowserView.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qabstracttextdocumentlayout.h:43, from /usr/include/qt5/QtGui/QAbstractTextDocumentLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/BrowserView.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/BrowserView.cpp: In constructor 'WebGui::WebView::WebView(QWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/BrowserView.cpp:143:68: warning: 'const QRect QDesktopWidget::screenGeometry(int) const' is deprecated: Use QGuiApplication::screens() [-Wdeprecated-declarations] 143 | QRect mainScreenSize = QApplication::desktop()->screenGeometry(); | ^ In file included from /usr/include/qt5/QtWidgets/QDesktopWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/BrowserView.cpp:52: /usr/include/qt5/QtWidgets/qdesktopwidget.h:79:67: note: declared here 79 | QT_DEPRECATED_X("Use QGuiApplication::screens()") const QRect screenGeometry(int screen = -1) const; | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/BrowserView.cpp: In member function 'virtual void WebGui::WebView::wheelEvent(QWheelEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/BrowserView.cpp:164:54: warning: 'int QWheelEvent::delta() const' is deprecated: Use angleDelta() [-Wdeprecated-declarations] 164 | qreal factor = zoomFactor() + (-event->delta() / 800.0); | ^ In file included from /usr/include/qt5/QtGui/qtextlayout.h:49, from /usr/include/qt5/QtGui/qabstracttextdocumentlayout.h:45, from /usr/include/qt5/QtGui/QAbstractTextDocumentLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/BrowserView.cpp:27: /usr/include/qt5/QtGui/qevent.h:219:16: note: declared here 219 | inline int delta() const { return qt4D; } | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/BrowserView.cpp: In constructor 'WebGui::BrowserView::BrowserView(QWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/BrowserView.cpp:228:29: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 228 | textSizeMultiplier(1.0) | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qabstracttextdocumentlayout.h:43, from /usr/include/qt5/QtGui/QAbstractTextDocumentLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/BrowserView.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 81%] Building CXX object src/Mod/ReverseEngineering/Gui/CMakeFiles/ReverseEngineeringGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DReverseEngineeringGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ReverseEngineeringGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/PreCompiled.cpp [ 81%] Building CXX object src/Mod/ReverseEngineering/Gui/CMakeFiles/ReverseEngineeringGui.dir/Workbench.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DReverseEngineeringGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ReverseEngineeringGui.dir/Workbench.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Workbench.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CommandSimple.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/qdir.h:43, from /usr/include/qt5/QtCore/QDir:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CommandSimple.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 81%] Building CXX object src/Mod/Drawing/Gui/CMakeFiles/DrawingGui.dir/ViewProviderView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DDrawingGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/DrawingGui.dir/ViewProviderView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/ViewProviderView.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinderImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CommandSimple.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/qdir.h:43, from /usr/include/qt5/QtCore/QDir:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CommandSimple.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinderImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CommandSimple.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/qdir.h:43, from /usr/include/qt5/QtCore/QDir:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CommandSimple.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinderImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CommandSimple.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:84:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | LocationDialog(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/qdir.h:43, from /usr/include/qt5/QtCore/QDir:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CommandSimple.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CommandSimple.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinderImp.h:36:66: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 36 | DlgPartCylinderImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/qdir.h:43, from /usr/include/qt5/QtCore/QDir:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CommandSimple.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CommandSimple.cpp: In member function 'virtual void CmdPartSimpleCylinder::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CommandSimple.cpp:68:57: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 68 | PartGui::DlgPartCylinderImp dlg(Gui::getMainWindow()); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/qdir.h:43, from /usr/include/qt5/QtCore/QDir:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CommandSimple.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 81%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/ViewProviderRobotObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/ViewProviderRobotObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderRobotObject.cpp [ 81%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/ViewProviderMeshPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/ViewProviderMeshPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderMeshPyImp.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp: In member function 'virtual void StartGui::Workbench::activated()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:78:45: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 78 | str << "import WebGui,sys,Start" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:78:45: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 78 | str << "import WebGui,sys,Start" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:79:53: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 79 | str << "from StartPage import StartPage" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:79:53: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 79 | str << "from StartPage import StartPage" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:80:16: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 80 | str << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:80:16: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 80 | str << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:81:44: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 81 | str << "class WebPage(object):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:81:44: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 81 | str << "class WebPage(object):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:82:45: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 82 | str << " def __init__(self):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:82:45: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 82 | str << " def __init__(self):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:83:100: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 83 | str << " self.browser=WebGui.openBrowserWindow(u'" << escapedstr.c_str() << "')" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:83:100: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 83 | str << " self.browser=WebGui.openBrowserWindow(u'" << escapedstr.c_str() << "')" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:87:129: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 87 | str << " self.browser.setHtml(StartPage.handle(), 'file://' + App.getResourceDir() + 'Mod/Start/StartPage/')" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:87:129: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 87 | str << " self.browser.setHtml(StartPage.handle(), 'file://' + App.getResourceDir() + 'Mod/Start/StartPage/')" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:89:58: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 89 | str << " def onChange(self, par, reason):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:89:58: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 89 | str << " def onChange(self, par, reason):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:90:57: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 90 | str << " if reason == 'RecentFiles':" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:90:57: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 90 | str << " if reason == 'RecentFiles':" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:94:133: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 94 | str << " self.browser.setHtml(StartPage.handle(), 'file://' + App.getResourceDir() + 'Mod/Start/StartPage/')" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:94:133: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 94 | str << " self.browser.setHtml(StartPage.handle(), 'file://' + App.getResourceDir() + 'Mod/Start/StartPage/')" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:96:16: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 96 | str << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:96:16: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 96 | str << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:97:44: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 97 | str << "class WebView(object):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:97:44: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 97 | str << "class WebView(object):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:98:45: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 98 | str << " def __init__(self):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:98:45: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 98 | str << " def __init__(self):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:99:110: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 99 | str << " self.pargrp = FreeCAD.ParamGet('User parameter:BaseApp/Preferences/RecentFiles')" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:99:110: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 99 | str << " self.pargrp = FreeCAD.ParamGet('User parameter:BaseApp/Preferences/RecentFiles')" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:100:54: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 100 | str << " self.webPage = WebPage()" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:100:54: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 100 | str << " self.webPage = WebPage()" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:101:62: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 101 | str << " self.pargrp.Attach(self.webPage)" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:101:62: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 101 | str << " self.pargrp.Attach(self.webPage)" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:102:44: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 102 | str << " def __del__(self):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:102:44: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 102 | str << " def __del__(self):" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:103:62: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 103 | str << " self.pargrp.Detach(self.webPage)" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:103:62: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 103 | str << " self.pargrp.Detach(self.webPage)" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:104:16: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 104 | str << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:104:16: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 104 | str << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:105:39: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 105 | str << "webView=WebView()" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:105:39: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 105 | str << "webView=WebView()" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:106:56: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 106 | str << "StartPage.checkPostOpenStartPage()" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:106:56: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations] 106 | str << "StartPage.checkPostOpenStartPage()" << endl; | ^~~~ In file included from /usr/include/qt5/QtCore/QTextStream:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Start/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qtextstream.h:293:75: note: declared here 293 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X(5, 15, "Use Qt::endl") QTextStream &endl(QTextStream &s); | ^~~~ [ 82%] Building CXX object src/Mod/Web/Gui/CMakeFiles/WebGui.dir/CookieJar.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -DWebGui_EXPORTS -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtWebKitWidgets -isystem /usr/include/qt5/QtWebKit -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/WebGui.dir/CookieJar.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Web/Gui/CookieJar.cpp [ 82%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/CommandParametric.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/CommandParametric.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CommandParametric.cpp [ 82%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/CrossSections.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/CrossSections.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp [ 82%] Linking CXX shared library ../../../../Mod/Start/StartGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Start/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/StartGui.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,StartGui.so -o ../../../../Mod/Start/StartGui.so CMakeFiles/StartGui.dir/qrc_Start.cpp.o CMakeFiles/StartGui.dir/DlgStartPreferencesImp.cpp.o CMakeFiles/StartGui.dir/AppStartGui.cpp.o CMakeFiles/StartGui.dir/Command.cpp.o CMakeFiles/StartGui.dir/PreCompiled.cpp.o CMakeFiles/StartGui.dir/Workbench.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Start:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Start/Start.so ../../../../lib/libFreeCADGui.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 -lCoin /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5Widgets.so.5.15.2 -lpthread /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Workbench.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/ReverseEngineering/Gui/Workbench.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Drawing/Gui/ViewProviderView.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 82%] Built target StartGui /usr/bin/gmake -f src/Mod/Inspection/Gui/CMakeFiles/InspectionGui.dir/build.make src/Mod/Inspection/Gui/CMakeFiles/InspectionGui.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 82%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Resources/icons/InspectionWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Inspection/Resources/icons/InspectionWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Resources/icons/InspectionWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Inspection/Resources/icons/InspectionWorkbench.svg [ 82%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Inspection/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Inspection/InitGui.py [ 82%] Generating moc_VisualInspection.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui/moc_VisualInspection.cpp_parameters [ 82%] Generating qrc_Inspection.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui && /usr/lib64/qt5/bin/rcc --name Inspection --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui/qrc_Inspection.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Resources/Inspection.qrc [ 82%] Generating ui_VisualInspection.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui/ui_VisualInspection.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui/CMakeFiles/InspectionGui.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui/CMakeFiles/InspectionGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui/CMakeFiles/InspectionGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui/CMakeFiles/InspectionGui.dir/depend.internal". Scanning dependencies of target InspectionGui gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Inspection/Gui/CMakeFiles/InspectionGui.dir/build.make src/Mod/Inspection/Gui/CMakeFiles/InspectionGui.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 82%] Building CXX object src/Mod/Inspection/Gui/CMakeFiles/InspectionGui.dir/qrc_Inspection.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DInspectionGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/InspectionGui.dir/qrc_Inspection.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui/qrc_Inspection.cpp [ 82%] Building CXX object src/Mod/Inspection/Gui/CMakeFiles/InspectionGui.dir/VisualInspection.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DInspectionGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/InspectionGui.dir/VisualInspection.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderRobotObject.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderRobotObject.cpp:41: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderMeshPyImp.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:39: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderRobotObject.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderRobotObject.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderRobotObject.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 82%] Linking CXX shared library ../../../../Mod/ReverseEngineering/ReverseEngineeringGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/ReverseEngineering/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/ReverseEngineeringGui.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,ReverseEngineeringGui.so -o ../../../../Mod/ReverseEngineering/ReverseEngineeringGui.so CMakeFiles/ReverseEngineeringGui.dir/qrc_ReverseEngineering.cpp.o CMakeFiles/ReverseEngineeringGui.dir/FitBSplineSurface.cpp.o CMakeFiles/ReverseEngineeringGui.dir/Poisson.cpp.o CMakeFiles/ReverseEngineeringGui.dir/AppReverseEngineeringGui.cpp.o CMakeFiles/ReverseEngineeringGui.dir/Command.cpp.o CMakeFiles/ReverseEngineeringGui.dir/PreCompiled.cpp.o CMakeFiles/ReverseEngineeringGui.dir/Workbench.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/ReverseEngineering:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Mesh:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Points: -lmpi_cxx -lmpi ../../../../Mod/ReverseEngineering/ReverseEngineering.so ../../../../lib/libFreeCADGui.so ../../../../Mod/Part/Part.so /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so /usr/lib64/libfreetype.so ../../../../Mod/Mesh/Mesh.so ../../../../Mod/Points/Points.so /usr/lib64/libQt5Concurrent.so.5.15.2 ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 -lCoin /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5Widgets.so.5.15.2 -lpthread /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so [ 82%] Linking CXX shared library ../../../../Mod/Web/WebGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Web/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/WebGui.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,WebGui.so -o ../../../../Mod/Web/WebGui.so CMakeFiles/WebGui.dir/qrc_Web.cpp.o CMakeFiles/WebGui.dir/AppWebGui.cpp.o CMakeFiles/WebGui.dir/Command.cpp.o CMakeFiles/WebGui.dir/PreCompiled.cpp.o CMakeFiles/WebGui.dir/Workbench.cpp.o CMakeFiles/WebGui.dir/BrowserView.cpp.o CMakeFiles/WebGui.dir/CookieJar.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../lib/libFreeCADGui.so /usr/lib64/libQt5WebKitWidgets.so.5.212.0 ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 -lCoin /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5UiTools.a -lpthread /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Widgets.so.5.15.2 /usr/lib64/libQt5WebKit.so.5.212.0 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderMeshPyImp.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ViewProviderMeshPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ViewProviderMeshPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 82%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/Mirroring.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/Mirroring.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Mirroring.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.h:40:64: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 40 | VisualInspection(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialog.h:43, from /usr/include/qt5/QtWidgets/QDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 82%] Linking CXX shared library ../../../../Mod/Drawing/DrawingGui.so gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Drawing/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/DrawingGui.dir/link.txt --verbose=1 [ 82%] Built target ReverseEngineeringGui /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,DrawingGui.so -o ../../../../Mod/Drawing/DrawingGui.so CMakeFiles/DrawingGui.dir/qrc_Drawing.cpp.o CMakeFiles/DrawingGui.dir/AppDrawingGui.cpp.o CMakeFiles/DrawingGui.dir/AppDrawingGuiPy.cpp.o CMakeFiles/DrawingGui.dir/Command.cpp.o CMakeFiles/DrawingGui.dir/PreCompiled.cpp.o CMakeFiles/DrawingGui.dir/TaskDialog.cpp.o CMakeFiles/DrawingGui.dir/TaskOrthoViews.cpp.o CMakeFiles/DrawingGui.dir/Workbench.cpp.o CMakeFiles/DrawingGui.dir/DrawingView.cpp.o CMakeFiles/DrawingGui.dir/ViewProviderPage.cpp.o CMakeFiles/DrawingGui.dir/ViewProviderView.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Drawing:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Spreadsheet: -lmpi_cxx -lmpi ../../../../Mod/Drawing/Drawing.so ../../../../lib/libFreeCADGui.so ../../../../Mod/Part/Part.so /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so /usr/lib64/libfreetype.so ../../../../Mod/Spreadsheet/Spreadsheet.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 -lCoin /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5Widgets.so.5.15.2 -lpthread /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so /usr/bin/gmake -f src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/build.make src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 82%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/icons/FemWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Fem/Resources/icons/FemWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/icons/FemWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Fem/Resources/icons/FemWorkbench.svg [ 82%] Generating moc_DlgSettingsFemCcxImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_DlgSettingsFemCcxImp.cpp_parameters [ 82%] Generating moc_DlgSettingsFemElmerImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_DlgSettingsFemElmerImp.cpp_parameters [ 82%] Generating moc_DlgSettingsFemExportAbaqusImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_DlgSettingsFemExportAbaqusImp.cpp_parameters [ 82%] Generating moc_DlgSettingsFemGeneralImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_DlgSettingsFemGeneralImp.cpp_parameters [ 82%] Generating moc_DlgSettingsFemGmshImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_DlgSettingsFemGmshImp.cpp_parameters [ 82%] Generating moc_DlgSettingsFemInOutVtkImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_DlgSettingsFemInOutVtkImp.cpp_parameters [ 82%] Generating moc_DlgSettingsFemMaterialImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_DlgSettingsFemMaterialImp.cpp_parameters gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 82%] Built target WebGui /usr/bin/gmake -f src/Mod/Spreadsheet/Gui/CMakeFiles/SpreadsheetGui.dir/build.make src/Mod/Spreadsheet/Gui/CMakeFiles/SpreadsheetGui.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 82%] Generating moc_DlgSettingsFemZ88Imp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_DlgSettingsFemZ88Imp.cpp_parameters [ 82%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Resources/icons/SpreadsheetWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Spreadsheet/Resources/icons/SpreadsheetWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Resources/icons/SpreadsheetWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Spreadsheet/Resources/icons/SpreadsheetWorkbench.svg [ 82%] Generating moc_PropertyFemMeshItem.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_PropertyFemMeshItem.cpp_parameters [ 82%] Generating moc_LineEdit.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui/moc_LineEdit.cpp_parameters [ 82%] Generating moc_PropertiesDialog.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui/moc_PropertiesDialog.cpp_parameters /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 82%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/ViewProviderMeshFaceSet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/ViewProviderMeshFaceSet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderMeshFaceSet.cpp [ 82%] Generating moc_TaskAnalysisInfo.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskAnalysisInfo.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_CrossSections.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:49: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.h:47:89: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 47 | CrossSections(const Base::BoundBox3d& bb, QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qfuture.h:43, from /usr/include/qt5/QtCore/QFuture:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qfuture.h:43, from /usr/include/qt5/QtCore/QFuture:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 82%] Built target DrawingGui /usr/bin/gmake -f src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/build.make src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 82%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Resources/icons/preferences-techdraw.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/TechDraw/Resources/icons/preferences-techdraw.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Resources/icons/preferences-techdraw.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/TechDraw/Resources/icons/preferences-techdraw.svg [ 82%] Generating moc_DlgPrefsTechDraw2Imp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/moc_DlgPrefsTechDraw2Imp.cpp_parameters [ 82%] Generating moc_DlgPrefsTechDrawImp.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/moc_DlgPrefsTechDrawImp.cpp_parameters [ 82%] Generating moc_DlgTemplateField.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/moc_DlgTemplateField.cpp_parameters [ 82%] Generating moc_MDIViewPage.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/moc_MDIViewPage.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qfuture.h:43, from /usr/include/qt5/QtCore/QFuture:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 82%] Generating moc_SheetModel.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui/moc_SheetModel.cpp_parameters [ 82%] Generating moc_SheetTableView.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui/moc_SheetTableView.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qfuture.h:43, from /usr/include/qt5/QtCore/QFuture:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qfuture.h:43, from /usr/include/qt5/QtCore/QFuture:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qfuture.h:43, from /usr/include/qt5/QtCore/QFuture:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qfuture.h:43, from /usr/include/qt5/QtCore/QFuture:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qfuture.h:43, from /usr/include/qt5/QtCore/QFuture:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qfuture.h:43, from /usr/include/qt5/QtCore/QFuture:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp: In constructor 'PartGui::TaskCrossSections::TaskCrossSections(const BoundBox3d&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:516:34: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 516 | widget = new CrossSections(bb); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qfuture.h:43, from /usr/include/qt5/QtCore/QFuture:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/CrossSections.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Mirroring.cpp:31: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QuantitySpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui/ui_VisualInspection.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 82%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/ViewProviderTrajectory.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/ViewProviderTrajectory.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectory.cpp [ 82%] Generating moc_TaskCreateNodeSet.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskCreateNodeSet.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialog.h:43, from /usr/include/qt5/QtWidgets/QDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 82%] Generating moc_QGIDrawingTemplate.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialog.h:43, from /usr/include/qt5/QtWidgets/QDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/moc_QGIDrawingTemplate.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialog.h:43, from /usr/include/qt5/QtWidgets/QDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 82%] Generating moc_QGISVGTemplate.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/moc_QGISVGTemplate.cpp_parameters [ 82%] Generating moc_QGITemplate.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/moc_QGITemplate.cpp_parameters [ 82%] Generating moc_QGIViewDimension.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialog.h:43, from /usr/include/qt5/QtWidgets/QDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialog.h:43, from /usr/include/qt5/QtWidgets/QDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialog.h:43, from /usr/include/qt5/QtWidgets/QDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/moc_QGIViewDimension.cpp_parameters /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 82%] Generating moc_SpreadsheetDelegate.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui/moc_SpreadsheetDelegate.cpp_parameters [ 82%] Generating moc_SpreadsheetView.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui/moc_SpreadsheetView.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Mirroring.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Mirroring.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Mirroring.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Mirroring.cpp:37: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 82%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/DlgBooleanOperation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/DlgBooleanOperation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgBooleanOperation.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Mirroring.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Mirroring.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 82%] Generating moc_TaskDlgAnalysis.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskDlgAnalysis.cpp_parameters [ 82%] Building CXX object src/Mod/Inspection/Gui/CMakeFiles/InspectionGui.dir/AppInspectionGui.cpp.o [ 82%] Generating moc_QGVPage.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/moc_QGVPage.cpp_parameters cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DInspectionGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/InspectionGui.dir/AppInspectionGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/AppInspectionGui.cpp [ 82%] Generating moc_TaskGeomHatch.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/moc_TaskGeomHatch.cpp_parameters [ 82%] Generating moc_Workbench.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui/moc_Workbench.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderMeshFaceSet.cpp:53: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 82%] Generating moc_TaskDlgCreateNodeSet.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskDlgCreateNodeSet.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderMeshFaceSet.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderMeshFaceSet.cpp:42: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 82%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/DlgExtrusion.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/DlgExtrusion.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgExtrusion.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderMeshFaceSet.cpp:65: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderMeshFaceSet.cpp:42: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectory.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectory.cpp:49: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderMeshFaceSet.cpp:66: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderMeshFaceSet.cpp:42: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderMeshFaceSet.cpp:66: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderMeshFaceSet.cpp:42: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderMeshFaceSet.cpp:66: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderMeshFaceSet.cpp:42: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderMeshFaceSet.cpp:66: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderMeshFaceSet.cpp:42: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderMeshFaceSet.cpp:66: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderMeshFaceSet.cpp:42: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderMeshFaceSet.cpp:66: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderMeshFaceSet.cpp:42: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 82%] Generating moc_TaskLinkDim.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/moc_TaskLinkDim.cpp_parameters [ 83%] Generating moc_qtcolorpicker-internal.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/lib64/qt5/bin/moc -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui/moc_qtcolorpicker-internal.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/qtcolorpicker.cpp [ 83%] Generating moc_qtcolorpicker.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui/moc_qtcolorpicker.cpp_parameters In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgBooleanOperation.cpp:30: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 83%] Generating qrc_Spreadsheet.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/lib64/qt5/bin/rcc --name Spreadsheet --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui/qrc_Spreadsheet.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Resources/Spreadsheet.qrc [ 83%] Generating ui_PropertiesDialog.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui/ui_PropertiesDialog.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/PropertiesDialog.ui [ 83%] Generating ui_Sheet.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui/ui_Sheet.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Sheet.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui/CMakeFiles/SpreadsheetGui.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui/CMakeFiles/SpreadsheetGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui/CMakeFiles/SpreadsheetGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui/CMakeFiles/SpreadsheetGui.dir/depend.internal". In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectory.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectory.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectory.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ Scanning dependencies of target SpreadsheetGui gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Spreadsheet/Gui/CMakeFiles/SpreadsheetGui.dir/build.make src/Mod/Spreadsheet/Gui/CMakeFiles/SpreadsheetGui.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 83%] Building CXX object src/Mod/Spreadsheet/Gui/CMakeFiles/SpreadsheetGui.dir/qrc_Spreadsheet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSpreadsheetGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SpreadsheetGui.dir/qrc_Spreadsheet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui/qrc_Spreadsheet.cpp [ 83%] Generating moc_TaskDlgMeshShapeNetgen.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskDlgMeshShapeNetgen.cpp_parameters [ 83%] Building CXX object src/Mod/Spreadsheet/Gui/CMakeFiles/SpreadsheetGui.dir/AppSpreadsheetGui.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSpreadsheetGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SpreadsheetGui.dir/AppSpreadsheetGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/AppSpreadsheetGui.cpp [ 83%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/ViewProviderTransform.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/ViewProviderTransform.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderTransform.cpp [ 83%] Generating moc_TaskProjGroup.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/moc_TaskProjGroup.cpp_parameters /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/AppInspectionGui.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 83%] Generating moc_TaskDriver.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskDriver.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgBooleanOperation.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgBooleanOperation.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgBooleanOperation.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgBooleanOperation.cpp:33: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgBooleanOperation.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgBooleanOperation.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 83%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/ViewProviderEdge2TracObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/ViewProviderEdge2TracObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderEdge2TracObject.cpp [ 83%] Generating moc_TaskSectionView.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/moc_TaskSectionView.cpp_parameters [ 83%] Building CXX object src/Mod/Inspection/Gui/CMakeFiles/InspectionGui.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DInspectionGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/InspectionGui.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QuantitySpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgExtrusion.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgExtrusion.cpp:43: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 83%] Generating moc_TaskFemConstraint.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskFemConstraint.cpp_parameters [ 83%] Generating qrc_TechDraw.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/lib64/qt5/bin/rcc --name TechDraw --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/qrc_TechDraw.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Resources/TechDraw.qrc In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/AppSpreadsheetGui.cpp:39: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 83%] Generating ui_DlgPrefsTechDraw.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw.ui [ 84%] Generating ui_DlgPrefsTechDraw2.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw2.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2.ui [ 84%] Generating ui_DlgTemplateField.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgTemplateField.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgTemplateField.ui [ 84%] Generating ui_TaskGeomHatch.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_TaskGeomHatch.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.ui [ 84%] Generating ui_TaskLinkDim.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_TaskLinkDim.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskLinkDim.ui [ 84%] Generating ui_TaskProjGroup.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_TaskProjGroup.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.ui [ 84%] Generating ui_TaskSectionView.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_TaskSectionView.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskSectionView.ui [ 84%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Resources/fonts/osifont-lgpl3fe.ttf to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/TechDraw/Resources/fonts/osifont-lgpl3fe.ttf cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Resources/fonts/osifont-lgpl3fe.ttf /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/TechDraw/Resources/fonts/osifont-lgpl3fe.ttf [ 84%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Resources/fonts/osifont.license to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/TechDraw/Resources/fonts/osifont.license cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Resources/fonts/osifont.license /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/TechDraw/Resources/fonts/osifont.license cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/depend.internal". In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgExtrusion.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgExtrusion.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgExtrusion.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgExtrusion.cpp:43: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgExtrusion.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgExtrusion.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgExtrusion.h:42:60: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 42 | DlgExtrusion(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QKeyEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgExtrusion.cpp:37: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/AppSpreadsheetGui.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/AppSpreadsheetGui.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderTransform.cpp:39: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgExtrusion.cpp:55: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QKeyEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgExtrusion.cpp:37: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ Scanning dependencies of target TechDrawGui gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/build.make src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgExtrusion.cpp: In constructor 'PartGui::TaskExtrusion::TaskExtrusion()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgExtrusion.cpp:725:31: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 725 | widget = new DlgExtrusion(); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QKeyEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgExtrusion.cpp:37: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 84%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/qrc_TechDraw.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/qrc_TechDraw.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/qrc_TechDraw.cpp [ 84%] Generating moc_TaskFemConstraintBearing.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskFemConstraintBearing.cpp_parameters [ 84%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/AppTechDrawGui.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/AppTechDrawGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/AppTechDrawGui.cpp [ 84%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/DlgFilletEdges.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/DlgFilletEdges.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectory.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderEdge2TracObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderEdge2TracObject.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 84%] Building CXX object src/Mod/Spreadsheet/Gui/CMakeFiles/SpreadsheetGui.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSpreadsheetGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SpreadsheetGui.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Command.cpp [ 84%] Generating moc_TaskFemConstraintContact.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskFemConstraintContact.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgEdge2Trac.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderEdge2TracObject.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgEdge2Trac.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderEdge2TracObject.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgEdge2Trac.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderEdge2TracObject.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 84%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/DlgPartBoxImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/DlgPartBoxImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartBoxImp.cpp [ 84%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/ViewProviderTransformDemolding.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/ViewProviderTransformDemolding.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderTransformDemolding.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskEdge2TracParameter.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgEdge2Trac.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderEdge2TracObject.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskEdge2TracParameter.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgEdge2Trac.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderEdge2TracObject.cpp:31: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 84%] Generating moc_TaskFemConstraintDisplacement.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskFemConstraintDisplacement.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:46: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 84%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/ViewProviderTrajectoryCompound.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/ViewProviderTrajectoryCompound.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectoryCompound.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/AppTechDrawGui.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.h:115:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 115 | DlgPreferencesImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontdatabase.h:43, from /usr/include/qt5/QtGui/QFontDatabase:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/AppTechDrawGui.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/AppTechDrawGui.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.h:54:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 54 | DlgCustomizeImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontdatabase.h:43, from /usr/include/qt5/QtGui/QFontDatabase:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/AppTechDrawGui.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/VisualInspection.h:40:64: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 40 | VisualInspection(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp: In member function 'virtual void CmdVisualInspection::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp:58:61: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 58 | InspectionGui::VisualInspection dlg(Gui::getMainWindow()); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Command.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 85%] Generating moc_TaskFemConstraintFixed.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartBoxImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartBoxImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgPartBox.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartBoxImp.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartBoxImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskFemConstraintFixed.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartBoxImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartBoxImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgPartBox.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartBoxImp.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartBoxImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartBoxImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartBoxImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:84:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | LocationDialog(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgPartBox.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartBoxImp.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartBoxImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartBoxImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartBoxImp.h:36:61: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 36 | DlgPartBoxImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgPartBox.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartBoxImp.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartBoxImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/AppTechDrawGui.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:52: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/AppTechDrawGui.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontdatabase.h:43, from /usr/include/qt5/QtGui/QFontDatabase:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/AppTechDrawGui.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/AppTechDrawGui.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontdatabase.h:43, from /usr/include/qt5/QtGui/QFontDatabase:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/AppTechDrawGui.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/AppTechDrawGui.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontdatabase.h:43, from /usr/include/qt5/QtGui/QFontDatabase:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/AppTechDrawGui.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.h:84:98: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | DlgFilletEdges(FilletType type, Part::FilletBase*, QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qitemdelegate.h:43, from /usr/include/qt5/QtWidgets/QItemDelegate:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.h:124:124: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 124 | FilletEdgesDialog(DlgFilletEdges::FilletType type, Part::FilletBase* fillet, QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qitemdelegate.h:43, from /usr/include/qt5/QtWidgets/QItemDelegate:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.h:137:82: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 137 | DlgChamferEdges(Part::FilletBase*, QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qitemdelegate.h:43, from /usr/include/qt5/QtWidgets/QItemDelegate:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Command.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/AppTechDrawGui.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontdatabase.h:43, from /usr/include/qt5/QtGui/QFontDatabase:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/AppTechDrawGui.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/AppTechDrawGui.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontdatabase.h:43, from /usr/include/qt5/QtGui/QFontDatabase:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/AppTechDrawGui.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 85%] Building CXX object src/Mod/Inspection/Gui/CMakeFiles/InspectionGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DInspectionGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/InspectionGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/PreCompiled.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProvider.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderTransformDemolding.h:46, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/ViewProviderTransformDemolding.cpp:38: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 85%] Building CXX object src/Mod/Inspection/Gui/CMakeFiles/InspectionGui.dir/ViewProviderInspection.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DInspectionGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/InspectionGui.dir/ViewProviderInspection.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/ViewProviderInspection.cpp [ 85%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/DlgPartCylinderImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/DlgPartCylinderImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinderImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:73: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qitemdelegate.h:43, from /usr/include/qt5/QtWidgets/QItemDelegate:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:73: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qitemdelegate.h:43, from /usr/include/qt5/QtWidgets/QItemDelegate:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:73: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qitemdelegate.h:43, from /usr/include/qt5/QtWidgets/QItemDelegate:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:73: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qitemdelegate.h:43, from /usr/include/qt5/QtWidgets/QItemDelegate:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:73: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qitemdelegate.h:43, from /usr/include/qt5/QtWidgets/QItemDelegate:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:73: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qitemdelegate.h:43, from /usr/include/qt5/QtWidgets/QItemDelegate:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 85%] Generating moc_TaskFemConstraintFluidBoundary.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskFemConstraintFluidBoundary.cpp_parameters /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp: In constructor 'PartGui::FilletEdgesDialog::FilletEdgesDialog(PartGui::DlgFilletEdges::FilletType, Part::FilletBase*, QWidget*, Qt::WindowFlags)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:968:51: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 968 | widget = new DlgFilletEdges(type, fillet, this); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qitemdelegate.h:43, from /usr/include/qt5/QtWidgets/QItemDelegate:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp: In constructor 'PartGui::TaskFilletEdges::TaskFilletEdges(Part::Fillet*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:996:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 996 | widget = new DlgFilletEdges(DlgFilletEdges::FILLET, fillet); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qitemdelegate.h:43, from /usr/include/qt5/QtWidgets/QItemDelegate:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp: In constructor 'PartGui::TaskChamferEdges::TaskChamferEdges(Part::Chamfer*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:1055:41: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 1055 | widget = new DlgChamferEdges(chamfer); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qitemdelegate.h:43, from /usr/include/qt5/QtWidgets/QItemDelegate:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.cpp:38: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Command.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Command.cpp:15: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Command.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Command.cpp:15: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Command.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Command.cpp:15: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Command.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Command.cpp:15: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Command.cpp: In member function 'virtual void CmdSpreadsheetImport::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Command.cpp:187:72: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 187 | &selectedFilter); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Command.cpp:15: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Command.cpp: In member function 'virtual void CmdSpreadsheetExport::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Command.cpp:233:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 233 | &selectedFilter); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Command.cpp:15: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectory.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectoryCompound.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectoryCompound.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 85%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/AppTechDrawGuiPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/AppTechDrawGuiPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/AppTechDrawGuiPy.cpp [ 85%] Generating moc_TaskFemConstraintForce.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskFemConstraintForce.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryCompound.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryCompound.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectoryCompound.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryCompound.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryCompound.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectoryCompound.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryCompound.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryCompound.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectoryCompound.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 85%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/AppMeshGui.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/AppMeshGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/AppMeshGui.cpp [ 85%] Building CXX object src/Mod/Spreadsheet/Gui/CMakeFiles/SpreadsheetGui.dir/LineEdit.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSpreadsheetGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SpreadsheetGui.dir/LineEdit.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/LineEdit.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinderImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinderImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgPartCylinder.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinderImp.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinderImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinderImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinderImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgPartCylinder.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinderImp.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinderImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinderImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinderImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:84:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | LocationDialog(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgPartCylinder.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinderImp.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinderImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinderImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinderImp.h:36:66: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 36 | DlgPartCylinderImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgPartCylinder.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinderImp.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartCylinderImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 85%] Generating moc_TaskFemConstraintGear.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskFemConstraintGear.cpp_parameters [ 85%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/ViewProviderTrajectoryDressUp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/ViewProviderTrajectoryDressUp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectoryDressUp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/ViewProviderInspection.cpp:49: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 85%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/DlgPartImportIgesImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/DlgPartImportIgesImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIgesImp.cpp [ 85%] Building CXX object src/Mod/Spreadsheet/Gui/CMakeFiles/SpreadsheetGui.dir/ViewProviderSpreadsheet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSpreadsheetGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SpreadsheetGui.dir/ViewProviderSpreadsheet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/ViewProviderSpreadsheet.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/AppTechDrawGuiPy.cpp:40: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/ViewProviderInspection.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/ViewProviderInspection.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIgesImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qlineedit.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIgesImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIgesImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qlineedit.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIgesImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIgesImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qlineedit.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIgesImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/ViewProviderInspection.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/ViewProviderInspection.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/ViewProviderInspection.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/ViewProviderInspection.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/ViewProviderInspection.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/ViewProviderInspection.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 85%] Generating moc_TaskFemConstraintHeatflux.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskFemConstraintHeatflux.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/ViewProviderInspection.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/ViewProviderInspection.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/ViewProviderInspection.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/ViewProviderInspection.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/ViewProviderInspection.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/ViewProviderInspection.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIgesImp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIgesImp.h:36:67: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 36 | DlgPartImportIgesImp( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qlineedit.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIgesImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIgesImp.cpp: In member function 'virtual void PartGui::DlgPartImportIgesImp::onChooseFileName()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIgesImp.cpp:69:82: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 69 | QString fn = Gui::FileDialog::getOpenFileName(Gui::getMainWindow(), QString::null, QString::null, | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qframe.h:44, from /usr/include/qt5/QtWidgets/qlineedit.h:44, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIgesImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIgesImp.cpp:69:82: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 69 | QString fn = Gui::FileDialog::getOpenFileName(Gui::getMainWindow(), QString::null, QString::null, | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qframe.h:44, from /usr/include/qt5/QtWidgets/qlineedit.h:44, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIgesImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIgesImp.cpp:69:97: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 69 | QString fn = Gui::FileDialog::getOpenFileName(Gui::getMainWindow(), QString::null, QString::null, | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qframe.h:44, from /usr/include/qt5/QtWidgets/qlineedit.h:44, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIgesImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIgesImp.cpp:69:97: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 69 | QString fn = Gui::FileDialog::getOpenFileName(Gui::getMainWindow(), QString::null, QString::null, | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qframe.h:44, from /usr/include/qt5/QtWidgets/qlineedit.h:44, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIgesImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIgesImp.cpp:70:59: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 70 | QString::fromLatin1("%1 (*.igs *.iges);;%2 (*.*)")) | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qlineedit.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportIgesImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/ViewProviderInspection.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/ViewProviderInspection.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/ViewProviderInspection.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/ViewProviderInspection.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 85%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Command.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/AppMeshGui.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.h:115:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 115 | DlgPreferencesImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/AppMeshGui.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/AppMeshGui.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.h:54:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 54 | DlgCustomizeImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/AppMeshGui.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/AppTechDrawGuiPy.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/AppTechDrawGuiPy.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 85%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/DlgPartImportStepImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/DlgPartImportStepImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/AppMeshGui.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.h:70:66: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 70 | DlgEvaluateMeshImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/AppMeshGui.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/AppMeshGui.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.h:148:68: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 148 | DockEvaluateMeshImp( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/AppMeshGui.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 85%] Generating moc_TaskFemConstraintInitialTemperature.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskFemConstraintInitialTemperature.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/PropertyEditorMesh.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/AppMeshGui.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/AppMeshGui.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/PropertyEditorMesh.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/AppMeshGui.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/AppMeshGui.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgSettingsMeshView.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/AppMeshGui.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/AppMeshGui.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgSettingsMeshView.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/AppMeshGui.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/AppMeshGui.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgSettingsMeshView.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSettingsMeshView.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/AppMeshGui.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/AppMeshGui.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qlineedit.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qlineedit.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qlineedit.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectory.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectoryDressUp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectoryDressUp.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 85%] Building CXX object src/Mod/Inspection/Gui/CMakeFiles/InspectionGui.dir/Workbench.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DInspectionGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/InspectionGui.dir/Workbench.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Workbench.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.h:36:67: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 36 | DlgPartImportStepImp( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qlineedit.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.cpp: In member function 'virtual void PartGui::DlgPartImportStepImp::onChooseFileName()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.cpp:68:82: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 68 | QString fn = Gui::FileDialog::getOpenFileName(Gui::getMainWindow(), QString::null, QString::null, | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qframe.h:44, from /usr/include/qt5/QtWidgets/qlineedit.h:44, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.cpp:68:82: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 68 | QString fn = Gui::FileDialog::getOpenFileName(Gui::getMainWindow(), QString::null, QString::null, | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qframe.h:44, from /usr/include/qt5/QtWidgets/qlineedit.h:44, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.cpp:68:97: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 68 | QString fn = Gui::FileDialog::getOpenFileName(Gui::getMainWindow(), QString::null, QString::null, | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qframe.h:44, from /usr/include/qt5/QtWidgets/qlineedit.h:44, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.cpp:68:97: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 68 | QString fn = Gui::FileDialog::getOpenFileName(Gui::getMainWindow(), QString::null, QString::null, | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qframe.h:44, from /usr/include/qt5/QtWidgets/qlineedit.h:44, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.cpp:26: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.cpp:69:59: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 69 | QString::fromLatin1("%1 (*.stp *.step);;%2 (*.*)")) | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qlineedit.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPartImportStepImp.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/AppMeshGui.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/ViewProviderSpreadsheet.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/ViewProviderSpreadsheet.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 85%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/DlgPrimitives.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/DlgPrimitives.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp [ 85%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryDressUp.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectoryDressUp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryDressUp.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectoryDressUp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryDressUp.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectoryDressUp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 85%] Generating moc_TaskFemConstraintPlaneRotation.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskFemConstraintPlaneRotation.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryDressUp.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectoryDressUp.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryDressUp.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/ViewProviderTrajectoryDressUp.cpp:31: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SpreadsheetView.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/ViewProviderSpreadsheet.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/ViewProviderSpreadsheet.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Command.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Command.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Command.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Command.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Command.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Command.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 85%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp [ 85%] Generating moc_TaskFemConstraintPressure.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskFemConstraintPressure.cpp_parameters [ 85%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/Doxygen.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/Doxygen.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Doxygen.cpp [ 85%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/CommandTrajectory.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/CommandTrajectory.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Command.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Workbench.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Inspection/Gui/Workbench.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 85%] Building CXX object src/Mod/Spreadsheet/Gui/CMakeFiles/SpreadsheetGui.dir/SpreadsheetView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSpreadsheetGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SpreadsheetGui.dir/SpreadsheetView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SpreadsheetView.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Command.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Command.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Command.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Command.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Command.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 85%] Generating moc_TaskFemConstraintPulley.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskFemConstraintPulley.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 85%] Linking CXX shared library ../../../../Mod/Inspection/InspectionGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Inspection/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/InspectionGui.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,InspectionGui.so -o ../../../../Mod/Inspection/InspectionGui.so CMakeFiles/InspectionGui.dir/qrc_Inspection.cpp.o CMakeFiles/InspectionGui.dir/VisualInspection.cpp.o CMakeFiles/InspectionGui.dir/AppInspectionGui.cpp.o CMakeFiles/InspectionGui.dir/Command.cpp.o CMakeFiles/InspectionGui.dir/PreCompiled.cpp.o CMakeFiles/InspectionGui.dir/ViewProviderInspection.cpp.o CMakeFiles/InspectionGui.dir/Workbench.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Inspection:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Mesh:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Points:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part: -lmpi_cxx -lmpi ../../../../Mod/Inspection/Inspection.so ../../../../lib/libFreeCADGui.so ../../../../Mod/Mesh/Mesh.so ../../../../Mod/Points/Points.so /usr/lib64/libQt5Concurrent.so.5.15.2 ../../../../Mod/Part/Part.so /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so /usr/lib64/libfreetype.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 -lCoin /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5Widgets.so.5.15.2 -lpthread /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgSimulate.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Command.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgSimulate.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/Command.cpp:43: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:41: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 85%] Generating moc_TaskFemConstraintTemperature.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskFemConstraintTemperature.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qcoreapplication.h:43, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp:16: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qcoreapplication.h:43, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp:16: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qcoreapplication.h:43, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp:16: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qcoreapplication.h:43, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp:16: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:50: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qinputdialog.h:43, from /usr/include/qt5/QtWidgets/QInputDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qinputdialog.h:43, from /usr/include/qt5/QtWidgets/QInputDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qinputdialog.h:43, from /usr/include/qt5/QtWidgets/QInputDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 85%] Built target InspectionGui [ 85%] Generating moc_TaskFemConstraintTransform.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskFemConstraintTransform.cpp_parameters [ 85%] Generating moc_TaskObjectName.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskObjectName.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp:75: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp:75: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp: In member function 'virtual void CmdTechDrawNewPage::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp:192:107: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 192 | QString::fromUtf8(QT_TR_NOOP("Template (*.svg *.dxf)"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qcoreapplication.h:43, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp:16: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp: In member function 'virtual void CmdTechDrawSymbol::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp:909:131: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 909 | QString filename = Gui::FileDialog::getOpenFileName(Gui::getMainWindow(), QObject::tr("Choose an SVG file to open"), QString::null, | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp:16: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp:909:131: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 909 | QString filename = Gui::FileDialog::getOpenFileName(Gui::getMainWindow(), QObject::tr("Choose an SVG file to open"), QString::null, | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp:16: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp:910:93: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 910 | QString::fromLatin1("%1 (*.svg *.svgz)").arg(QObject::tr("Scalable Vector Graphic"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qcoreapplication.h:43, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp:16: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp: In member function 'virtual void CmdTechDrawExportPageDxf::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp:1189:96: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 1189 | QString::fromUtf8(QT_TR_NOOP("Dxf (*.dxf)"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qcoreapplication.h:43, from /usr/include/qt5/QtCore/QCoreApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Command.cpp:16: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_Location.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:53: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_Location.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:53: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_Location.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:53: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:84:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | LocationDialog(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgPrimitives.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:44: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 85%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/CommandInsertRobot.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/CommandInsertRobot.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandInsertRobot.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qinputdialog.h:43, from /usr/include/qt5/QtWidgets/QInputDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 85%] Generating moc_TaskPostBoxes.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskPostBoxes.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SpreadsheetView.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SpreadsheetView.cpp:38: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qinputdialog.h:43, from /usr/include/qt5/QtWidgets/QInputDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qinputdialog.h:43, from /usr/include/qt5/QtWidgets/QInputDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:84:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | LocationDialog(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qinputdialog.h:43, from /usr/include/qt5/QtWidgets/QInputDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:37: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:30: /usr/include/boost/bind.hpp: At global scope: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:49:57: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 49 | Placement(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qinputdialog.h:43, from /usr/include/qt5/QtWidgets/QInputDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:113:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 113 | DockablePlacement(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qinputdialog.h:43, from /usr/include/qt5/QtWidgets/QInputDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:60: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:60: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:60: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:64: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:65: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:65: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:65: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:65: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:65: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:65: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SpreadsheetView.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SpreadsheetView.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SpreadsheetView.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:70: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.h:70:66: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 70 | DlgEvaluateMeshImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:70: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgEvaluateMeshImp.h:148:68: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 148 | DockEvaluateMeshImp( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 85%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/CommandExport.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/CommandExport.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandExport.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:71: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.h:35:66: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 35 | DlgRegularSolidImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:71: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.h:52:72: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | SingleDlgRegularSolidImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:72: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui/ui_DlgRegularSolid.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgRegularSolidImp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:71: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:72: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.h:45:64: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 45 | RemoveComponents(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:72: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/RemoveComponents.h:81:70: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 81 | RemoveComponentsDialog(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:73: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/DlgSmoothing.h:76:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 76 | SmoothingDialog(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:77: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Segmentation.h:40:81: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 40 | Segmentation(Mesh::Feature* mesh, QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:78: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/SegmentationBestFit.h:82:88: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 82 | SegmentationBestFit(Mesh::Feature* mesh, QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp: In member function 'virtual void CmdMeshImport::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:458:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 458 | QObject::tr("Import mesh"), QString(), filter.join(QLatin1String(";;"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp: In member function 'virtual void CmdMeshExport::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:526:83: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 526 | QObject::tr("Export mesh"), dir, filter.join(QLatin1String(";;")), &format); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Command.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SpreadsheetView.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SpreadsheetView.cpp:38: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SpreadsheetView.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/qtcolorpicker.h:87:74: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 87 | void insertColor(const QColor &color, const QString &text = QString::null, int index = -1); | ^~~~ In file included from /usr/include/qt5/QtGui/qkeysequence.h:44, from /usr/include/qt5/QtWidgets/qaction.h:44, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SpreadsheetView.cpp:25: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SpreadsheetView.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/qtcolorpicker.h:87:74: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 87 | void insertColor(const QColor &color, const QString &text = QString::null, int index = -1); | ^~~~ In file included from /usr/include/qt5/QtGui/qkeysequence.h:44, from /usr/include/qt5/QtWidgets/qaction.h:44, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SpreadsheetView.cpp:25: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SpreadsheetView.cpp: In constructor 'SpreadsheetGui::SheetView::SheetView(Gui::Document*, App::DocumentObject*, QWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SpreadsheetView.cpp:67:40: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 67 | , sheet(static_cast(docObj)) | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SpreadsheetView.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp: In member function 'virtual void CmdRobotSetDefaultOrientation::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:229:28: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 229 | Gui::Dialog::Placement Dlg; | ^~~ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qinputdialog.h:43, from /usr/include/qt5/QtWidgets/QInputDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandTrajectory.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 85%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/CommandCreateDims.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/CommandCreateDims.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandCreateDims.cpp [ 85%] Generating moc_TaskTetParameter.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_TaskTetParameter.cpp_parameters [ 85%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/TaskRobot6Axis.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/TaskRobot6Axis.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandInsertRobot.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandInsertRobot.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandInsertRobot.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandInsertRobot.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandInsertRobot.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandInsertRobot.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 85%] Generating moc_ViewProviderFemPostFunction.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/moc_ViewProviderFemPostFunction.cpp_parameters [ 85%] Building CXX object src/Mod/Spreadsheet/Gui/CMakeFiles/SpreadsheetGui.dir/SpreadsheetDelegate.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSpreadsheetGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SpreadsheetGui.dir/SpreadsheetDelegate.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SpreadsheetDelegate.cpp [ 85%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/PreCompiled.cpp [ 85%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/MeshEditor.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/MeshEditor.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshEditor.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandInsertRobot.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 85%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/DlgRevolution.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/DlgRevolution.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandExport.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandExport.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandExport.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandExport.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandExport.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandExport.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandInsertRobot.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandInsertRobot.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandInsertRobot.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandInsertRobot.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandInsertRobot.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandExport.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 85%] Generating qrc_Fem.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/rcc --name Fem --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/qrc_Fem.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Resources/Fem.qrc [ 85%] Generating ui_DlgSettingsFemCcx.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemCcx.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemCcx.ui [ 85%] Generating ui_DlgSettingsFemElmer.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemElmer.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemElmer.ui [ 85%] Generating ui_DlgSettingsFemExportAbaqus.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemExportAbaqus.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemExportAbaqus.ui [ 85%] Generating ui_DlgSettingsFemGeneral.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemGeneral.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGeneral.ui [ 85%] Generating ui_DlgSettingsFemGmsh.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemGmsh.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGmsh.ui [ 85%] Generating ui_DlgSettingsFemInOutVtk.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemInOutVtk.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemInOutVtk.ui [ 85%] Generating ui_DlgSettingsFemMaterial.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemMaterial.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemMaterial.ui [ 85%] Generating ui_DlgSettingsFemZ88.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemZ88.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemZ88.ui [ 85%] Generating ui_PlaneWidget.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_PlaneWidget.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/PlaneWidget.ui [ 85%] Generating ui_SphereWidget.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_SphereWidget.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/SphereWidget.ui [ 85%] Generating ui_TaskAnalysisInfo.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskAnalysisInfo.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskAnalysisInfo.ui [ 85%] Generating ui_TaskCreateNodeSet.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskCreateNodeSet.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.ui [ 85%] Generating ui_TaskDriver.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskDriver.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.ui [ 85%] Generating ui_TaskFemConstraint.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraint.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraint.ui [ 85%] Generating ui_TaskFemConstraintBearing.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintBearing.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintBearing.ui [ 85%] Generating ui_TaskFemConstraintContact.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintContact.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintContact.ui [ 86%] Generating ui_TaskFemConstraintDisplacement.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintDisplacement.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintDisplacement.ui [ 86%] Generating ui_TaskFemConstraintFixed.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintFixed.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintFixed.ui [ 86%] Generating ui_TaskFemConstraintFluidBoundary.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintFluidBoundary.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintFluidBoundary.ui [ 86%] Generating ui_TaskFemConstraintForce.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintForce.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintForce.ui [ 86%] Generating ui_TaskFemConstraintHeatflux.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintHeatflux.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintHeatflux.ui [ 86%] Generating ui_TaskFemConstraintInitialTemperature.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintInitialTemperature.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintInitialTemperature.ui [ 86%] Generating ui_TaskFemConstraintPlaneRotation.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintPlaneRotation.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPlaneRotation.ui [ 86%] Generating ui_TaskFemConstraintPressure.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintPressure.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPressure.ui [ 86%] Generating ui_TaskFemConstraintTemperature.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintTemperature.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTemperature.ui [ 86%] Generating ui_TaskFemConstraintTransform.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintTransform.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTransform.ui [ 86%] Generating ui_TaskObjectName.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskObjectName.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskObjectName.ui [ 86%] Generating ui_TaskPostClip.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskPostClip.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostClip.ui [ 86%] Generating ui_TaskPostCut.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskPostCut.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostCut.ui [ 86%] Generating ui_TaskPostDataAlongLine.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskPostDataAlongLine.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostDataAlongLine.ui In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandCreateDims.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 86%] Generating ui_TaskPostDataAtPoint.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskPostDataAtPoint.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostDataAtPoint.ui [ 86%] Generating ui_TaskPostDisplay.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskPostDisplay.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostDisplay.ui In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandExport.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandExport.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 86%] Generating ui_TaskPostScalarClip.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskPostScalarClip.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostScalarClip.ui [ 86%] Generating ui_TaskPostWarpVector.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskPostWarpVector.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostWarpVector.ui [ 86%] Generating ui_TaskTetParameter.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskTetParameter.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/depend.internal". In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandExport.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandExport.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandExport.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshEditor.cpp:48: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/ui_TaskRobot6Axis.h:16, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp:35: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandCreateDims.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandCreateDims.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandExport.cpp: In member function 'virtual void CmdRobotExportKukaCompact::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandExport.cpp:90:147: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 90 | QString fn = Gui::FileDialog::getSaveFileName(Gui::getMainWindow(), QObject::tr("Export program"), QString(), filter.join(QLatin1String(";;"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandExport.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandExport.cpp: In member function 'virtual void CmdRobotExportKukaFull::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandExport.cpp:152:147: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 152 | QString fn = Gui::FileDialog::getSaveFileName(Gui::getMainWindow(), QObject::tr("Export program"), QString(), filter.join(QLatin1String(";;"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/CommandExport.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 86%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/DlgSettings3DViewPartImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/DlgSettings3DViewPartImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettings3DViewPartImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp:36: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ Scanning dependencies of target FemGui gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/build.make src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/build In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandCreateDims.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandCreateDims.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandCreateDims.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandCreateDims.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandCreateDims.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandCreateDims.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 86%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemMeshPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemMeshPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemMeshPyImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SpreadsheetDelegate.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskLinkDim.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandCreateDims.cpp:66: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskLinkDim.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandCreateDims.cpp:66: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_TaskLinkDim.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskLinkDim.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandCreateDims.cpp:66: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandCreateDims.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_TaskLinkDim.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskLinkDim.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandCreateDims.cpp:66: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandCreateDims.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QuantitySpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgRevolution.h:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.cpp:42: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 86%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/TaskTrajectory.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/TaskTrajectory.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectory.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshEditor.cpp:60: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshEditor.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/UnitsApi.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshEditor.cpp:60: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshEditor.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 86%] Building CXX object src/Mod/Spreadsheet/Gui/CMakeFiles/SpreadsheetGui.dir/SheetTableView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSpreadsheetGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SpreadsheetGui.dir/SheetTableView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SheetTableView.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:84:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | LocationDialog(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshEditor.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshEditor.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshEditor.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshEditor.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshEditor.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshEditor.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshEditor.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshEditor.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshEditor.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshEditor.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshEditor.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshEditor.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgRevolution.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.cpp:42: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.h:39:61: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 39 | DlgRevolution(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/UnitsApi.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/UnitsApi.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:84:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | LocationDialog(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/UnitsApi.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp:36: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:49:57: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 49 | Placement(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/UnitsApi.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:113:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 113 | DockablePlacement(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/UnitsApi.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp: In member function 'void RobotGui::TaskRobot6Axis::createPlacementDlg()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp:120:28: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 120 | Gui::Dialog::Placement plc; | ^~~ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/UnitsApi.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.cpp: In constructor 'PartGui::TaskRevolution::TaskRevolution()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.cpp:555:32: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 555 | widget = new DlgRevolution(); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgRevolution.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/DocumentObjectPy.h:8, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemMeshPyImp.cpp:7: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 86%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/CommandDecorate.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/CommandDecorate.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandDecorate.cpp [ 86%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/DlgSettingsFemCcxImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/DlgSettingsFemCcxImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemCcxImp.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SheetTableView.cpp:32: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectory.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectory.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/ui_TaskTrajectory.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectory.cpp:29: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettings3DViewPartImp.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemMeshPyImp.cpp:19: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ViewProviderFemMeshPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ViewProviderFemMeshPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [ 86%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/MeshSelection.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/MeshSelection.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.cpp [ 86%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/DlgSettingsGeneral.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/DlgSettingsGeneral.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsGeneral.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettings3DViewPart.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettings3DViewPartImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettings3DViewPartImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettings3DViewPart.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettings3DViewPartImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettings3DViewPartImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettings3DViewPart.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettings3DViewPartImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettings3DViewPartImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettings3DViewPart.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettings3DViewPartImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettings3DViewPartImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettings3DViewPart.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettings3DViewPartImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettings3DViewPartImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettings3DViewPartImp.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettings3DViewPartImp.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectory.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectory.cpp:30: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectory.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectory.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectory.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectory.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectory.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectory.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemCcx.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemCcxImp.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemCcxImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemCcxImp.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemCcx.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemCcxImp.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemCcxImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemCcxImp.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemCcx.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemCcxImp.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemCcxImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemCcxImp.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 86%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/DlgSettingsFemElmerImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/DlgSettingsFemElmerImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemElmerImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemCcx.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemCcxImp.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemCcxImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemCcxImp.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemCcx.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemCcxImp.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemCcxImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemCcxImp.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 86%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/DlgSettingsObjectColor.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/DlgSettingsObjectColor.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectory.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/ui_TaskTrajectory.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectory.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandDecorate.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 86%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/DlgSettingsFemExportAbaqusImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/DlgSettingsFemExportAbaqusImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemExportAbaqusImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettingsGeneral.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsGeneral.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qbuttongroup.h:43, from /usr/include/qt5/QtWidgets/QButtonGroup:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsGeneral.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettingsGeneral.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsGeneral.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qbuttongroup.h:43, from /usr/include/qt5/QtWidgets/QButtonGroup:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsGeneral.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettingsGeneral.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsGeneral.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qbuttongroup.h:43, from /usr/include/qt5/QtWidgets/QButtonGroup:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsGeneral.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettingsGeneral.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsGeneral.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qbuttongroup.h:43, from /usr/include/qt5/QtWidgets/QButtonGroup:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsGeneral.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettingsGeneral.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsGeneral.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qbuttongroup.h:43, from /usr/include/qt5/QtWidgets/QButtonGroup:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsGeneral.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandDecorate.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandDecorate.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandDecorate.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandDecorate.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandDecorate.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandDecorate.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandDecorate.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandDecorate.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandDecorate.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandDecorate.cpp:59: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 86%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/TaskRobotMessages.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/TaskRobotMessages.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotMessages.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemElmer.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemElmerImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemElmerImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemElmerImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemElmer.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemElmerImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemElmerImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemElmerImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemElmer.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemElmerImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemElmerImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemElmerImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_TaskGeomHatch.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandDecorate.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandDecorate.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_TaskGeomHatch.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandDecorate.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandDecorate.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandDecorate.cpp: In member function 'virtual void CmdTechDrawImage::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandDecorate.cpp:235:111: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 235 | QString::fromUtf8(QT_TR_NOOP("Image (*.png *.jpg *.jpeg)"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/CommandDecorate.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 86%] Building CXX object src/Mod/Spreadsheet/Gui/CMakeFiles/SpreadsheetGui.dir/SheetModel.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSpreadsheetGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SpreadsheetGui.dir/SheetModel.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SheetModel.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettingsObjectColor.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettingsObjectColor.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettingsObjectColor.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettingsObjectColor.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemElmer.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemElmerImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemElmerImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemElmerImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemElmer.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemElmerImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemElmerImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemElmerImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 86%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/PreCompiled.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.cpp:36: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 86%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/TaskRobotControl.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/TaskRobotControl.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotControl.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettingsObjectColor.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettingsObjectColor.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettingsObjectColor.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettingsObjectColor.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettingsObjectColor.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_DlgSettingsObjectColor.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgSettingsObjectColor.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qbitmap.h:43, from /usr/include/qt5/QtGui/QBitmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 86%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/TrajectorySimulate.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/TrajectorySimulate.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TrajectorySimulate.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qbitmap.h:43, from /usr/include/qt5/QtGui/QBitmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qbitmap.h:43, from /usr/include/qt5/QtGui/QBitmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qbitmap.h:43, from /usr/include/qt5/QtGui/QBitmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qbitmap.h:43, from /usr/include/qt5/QtGui/QBitmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qbitmap.h:43, from /usr/include/qt5/QtGui/QBitmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qbitmap.h:43, from /usr/include/qt5/QtGui/QBitmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qbitmap.h:43, from /usr/include/qt5/QtGui/QBitmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/MeshSelection.cpp:33: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 86%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/PreCompiled.cpp [ 86%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/Workbench.cpp.o [ 86%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/PropertyEnumAttacherItem.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/Workbench.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Workbench.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/PropertyEnumAttacherItem.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/PropertyEnumAttacherItem.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemExportAbaqus.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemExportAbaqusImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemExportAbaqusImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemExportAbaqus.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemExportAbaqusImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemExportAbaqusImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemExportAbaqus.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemExportAbaqusImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemExportAbaqusImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemExportAbaqus.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemExportAbaqusImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemExportAbaqusImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemExportAbaqus.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemExportAbaqusImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemExportAbaqusImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotMessages.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotMessages.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotMessages.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotMessages.cpp:32: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 86%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/DlgSettingsFemGeneralImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/DlgSettingsFemGeneralImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGeneralImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotControl.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotControl.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotControl.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotControl.cpp:32: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 86%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/PropertyEditorMesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/PropertyEditorMesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/PropertyEditorMesh.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotMessages.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotMessages.cpp:32: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotMessages.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotMessages.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotMessages.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotMessages.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotMessages.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotMessages.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SheetModel.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotControl.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotControl.cpp:32: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TrajectorySimulate.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TrajectorySimulate.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Workbench.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Workbench.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotControl.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotControl.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotControl.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotControl.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotControl.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotControl.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotMessages.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotMessages.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemGeneral.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGeneralImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGeneralImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGeneralImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemGeneral.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGeneralImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGeneralImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGeneralImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemGeneral.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGeneralImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGeneralImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGeneralImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TrajectorySimulate.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TrajectorySimulate.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TrajectorySimulate.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TrajectorySimulate.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TrajectorySimulate.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TrajectorySimulate.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemGeneral.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGeneralImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGeneralImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGeneralImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemGeneral.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGeneralImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGeneralImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGeneralImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/PropertyEnumAttacherItem.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotControl.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobotControl.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/PropertyEnumAttacherItem.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/PropertyEnumAttacherItem.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/PropertyEnumAttacherItem.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/PropertyEnumAttacherItem.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/PropertyEnumAttacherItem.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/PropertyEnumAttacherItem.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskAttacher.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/PropertyEnumAttacherItem.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/PropertyEnumAttacherItem.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/PropertyEnumAttacherItem.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/PropertyEnumAttacherItem.cpp:33: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/PropertyEditorMesh.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 86%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/DlgSettingsFemGmshImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/DlgSettingsFemGmshImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGmshImp.cpp [ 86%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/DlgSettingsFemInOutVtkImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/DlgSettingsFemInOutVtkImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemInOutVtkImp.cpp [ 86%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/TaskProjGroup.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/TaskProjGroup.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TrajectorySimulate.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qtimer.h:43, from /usr/include/qt5/QtCore/QTimer:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TrajectorySimulate.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 86%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/SoFCShapeObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/SoFCShapeObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoFCShapeObject.cpp [ 86%] Building CXX object src/Mod/Spreadsheet/Gui/CMakeFiles/SpreadsheetGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSpreadsheetGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SpreadsheetGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/PreCompiled.cpp [ 86%] Building CXX object src/Mod/Spreadsheet/Gui/CMakeFiles/SpreadsheetGui.dir/Workbench.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSpreadsheetGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SpreadsheetGui.dir/Workbench.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Workbench.cpp [ 86%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/SoBrepEdgeSet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/SoBrepEdgeSet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepEdgeSet.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/PropertyEditorMesh.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/PropertyEditorMesh.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/PropertyEditorMesh.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/PropertyEditorMesh.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/PropertyEditorMesh.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/PropertyEditorMesh.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 86%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/TaskEdge2TracParameter.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/TaskEdge2TracParameter.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskEdge2TracParameter.cpp [ 86%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/DlgPrefsTechDrawImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/DlgPrefsTechDrawImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemGmsh.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGmshImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGmshImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGmshImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemGmsh.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGmshImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGmshImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGmshImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemGmsh.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGmshImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGmshImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGmshImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 86%] Building CXX object src/Mod/Mesh/Gui/CMakeFiles/MeshGui.dir/Workbench.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DMeshGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshGui.dir/Workbench.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Workbench.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemInOutVtk.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemInOutVtkImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemInOutVtkImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemInOutVtk.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemInOutVtkImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemInOutVtkImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemGmsh.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGmshImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGmshImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGmshImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemGmsh.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGmshImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGmshImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemGmshImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemInOutVtk.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemInOutVtkImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemInOutVtkImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemInOutVtk.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemInOutVtkImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemInOutVtkImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemInOutVtk.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemInOutVtkImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemInOutVtkImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 86%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/DlgSettingsFemMaterialImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/DlgSettingsFemMaterialImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemMaterialImp.cpp [ 86%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/DlgSettingsFemZ88Imp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/DlgSettingsFemZ88Imp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemZ88Imp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepEdgeSet.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepEdgeSet.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepEdgeSet.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepEdgeSet.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepEdgeSet.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepEdgeSet.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepEdgeSet.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepEdgeSet.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepEdgeSet.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepEdgeSet.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepEdgeSet.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepEdgeSet.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDrawImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskEdge2TracParameter.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskEdge2TracParameter.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/ui_TaskEdge2TracParameter.h:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskEdge2TracParameter.cpp:31: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Workbench.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Workbench.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepEdgeSet.cpp:62: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Workbench.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/qtcolorpicker.h:87:74: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 87 | void insertColor(const QColor &color, const QString &text = QString::null, int index = -1); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Workbench.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/qtcolorpicker.h:87:74: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 87 | void insertColor(const QColor &color, const QString &text = QString::null, int index = -1); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskEdge2TracParameter.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskEdge2TracParameter.cpp:32: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemZ88.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemZ88Imp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemZ88Imp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemZ88Imp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemZ88.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemZ88Imp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemZ88Imp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemZ88Imp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemZ88.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemZ88Imp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemZ88Imp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemZ88Imp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/SpreadsheetView.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Workbench.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Edge2TracObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskEdge2TracParameter.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskEdge2TracParameter.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Edge2TracObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskEdge2TracParameter.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskEdge2TracParameter.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Edge2TracObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskEdge2TracParameter.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskEdge2TracParameter.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemZ88.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemZ88Imp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemZ88Imp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemZ88Imp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemZ88.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemZ88Imp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemZ88Imp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemZ88Imp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemMaterial.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemMaterialImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemMaterialImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemMaterialImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemMaterial.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemMaterialImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemMaterialImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemMaterialImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemMaterial.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemMaterialImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemMaterialImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemMaterialImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.cpp:56: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemMaterial.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemMaterialImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemMaterialImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemMaterialImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemMaterial.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemMaterialImp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemMaterialImp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemMaterialImp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 87%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskFemConstraint.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskFemConstraint.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraint.cpp [ 87%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskFemConstraintBearing.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskFemConstraintBearing.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintBearing.cpp [ 87%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/SoBrepFaceSet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/SoBrepFaceSet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepFaceSet.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskEdge2TracParameter.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskEdge2TracParameter.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Workbench.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Workbench.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 87%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskFemConstraintFixed.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskFemConstraintFixed.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintFixed.cpp [ 87%] Building CXX object src/Mod/Spreadsheet/Gui/CMakeFiles/SpreadsheetGui.dir/qtcolorpicker.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSpreadsheetGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SpreadsheetGui.dir/qtcolorpicker.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/qtcolorpicker.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Workbench.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/Gui/Workbench.cpp:29: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/Coin4/Inventor/C/glue/gl.h:42, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepFaceSet.cpp:80: /usr/include/Coin4/Inventor/system/gl.h:45: warning: "GL_GLEXT_PROTOTYPES" redefined 45 | #define GL_GLEXT_PROTOTYPES 1 | /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepFaceSet.cpp:26: note: this is the location of the previous definition 26 | #define GL_GLEXT_PROTOTYPES | [ 87%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/DlgPrefsTechDraw2Imp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/DlgPrefsTechDraw2Imp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2Imp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/qtcolorpicker.cpp:67: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/qtcolorpicker.h:87:74: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 87 | void insertColor(const QColor &color, const QString &text = QString::null, int index = -1); | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/qtcolorpicker.cpp:47: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/qtcolorpicker.cpp:67: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/qtcolorpicker.h:87:74: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 87 | void insertColor(const QColor &color, const QString &text = QString::null, int index = -1); | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/qtcolorpicker.cpp:47: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/qtcolorpicker.cpp:171:85: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 171 | ColorPickerItem(const QColor &color = Qt::white, const QString &text = QString::null, | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/qtcolorpicker.cpp:47: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/qtcolorpicker.cpp:171:85: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 171 | ColorPickerItem(const QColor &color = Qt::white, const QString &text = QString::null, | ^~~~ In file included from /usr/include/qt5/QtCore/qcoreapplication.h:44, from /usr/include/qt5/QtWidgets/qapplication.h:44, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/qtcolorpicker.cpp:47: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepFaceSet.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepFaceSet.cpp:61: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepFaceSet.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepFaceSet.cpp:61: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepFaceSet.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepFaceSet.cpp:61: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepFaceSet.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepFaceSet.cpp:61: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepFaceSet.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepFaceSet.cpp:61: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepFaceSet.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepFaceSet.cpp:61: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 87%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/TaskTrajectoryDressUpParameter.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/TaskTrajectoryDressUpParameter.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp [ 87%] Building CXX object src/Mod/Spreadsheet/Gui/CMakeFiles/SpreadsheetGui.dir/PropertiesDialog.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSpreadsheetGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SpreadsheetGui.dir/PropertiesDialog.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/PropertiesDialog.cpp [ 87%] Linking CXX shared library ../../../../Mod/Mesh/MeshGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Mesh/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/MeshGui.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,MeshGui.so -o ../../../../Mod/Mesh/MeshGui.so CMakeFiles/MeshGui.dir/DlgEvaluateMeshImp.cpp.o CMakeFiles/MeshGui.dir/DlgEvaluateSettings.cpp.o CMakeFiles/MeshGui.dir/DlgRegularSolidImp.cpp.o CMakeFiles/MeshGui.dir/DlgSettingsMeshView.cpp.o CMakeFiles/MeshGui.dir/DlgSettingsImportExportImp.cpp.o CMakeFiles/MeshGui.dir/DlgSmoothing.cpp.o CMakeFiles/MeshGui.dir/RemoveComponents.cpp.o CMakeFiles/MeshGui.dir/Segmentation.cpp.o CMakeFiles/MeshGui.dir/SegmentationBestFit.cpp.o CMakeFiles/MeshGui.dir/Selection.cpp.o CMakeFiles/MeshGui.dir/SoFCIndexedFaceSet.cpp.o CMakeFiles/MeshGui.dir/SoFCMeshObject.cpp.o CMakeFiles/MeshGui.dir/SoPolygon.cpp.o CMakeFiles/MeshGui.dir/qrc_Mesh.cpp.o CMakeFiles/MeshGui.dir/ViewProvider.cpp.o CMakeFiles/MeshGui.dir/ViewProviderPython.cpp.o CMakeFiles/MeshGui.dir/ViewProviderCurvature.cpp.o CMakeFiles/MeshGui.dir/ViewProviderDefects.cpp.o CMakeFiles/MeshGui.dir/ViewProviderMeshPyImp.cpp.o CMakeFiles/MeshGui.dir/ViewProviderMeshFaceSet.cpp.o CMakeFiles/MeshGui.dir/ViewProviderTransform.cpp.o CMakeFiles/MeshGui.dir/ViewProviderTransformDemolding.cpp.o CMakeFiles/MeshGui.dir/AppMeshGui.cpp.o CMakeFiles/MeshGui.dir/Command.cpp.o CMakeFiles/MeshGui.dir/Doxygen.cpp.o CMakeFiles/MeshGui.dir/PreCompiled.cpp.o CMakeFiles/MeshGui.dir/MeshEditor.cpp.o CMakeFiles/MeshGui.dir/MeshSelection.cpp.o CMakeFiles/MeshGui.dir/PropertyEditorMesh.cpp.o CMakeFiles/MeshGui.dir/Workbench.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Mesh:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi -lpthread /usr/lib64/libGLU.so ../../../../Mod/Mesh/Mesh.so ../../../../lib/libFreeCADGui.so /usr/lib64/libQt5Concurrent.so.5.15.2 ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 -lCoin -lpthread /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a -lpthread /usr/lib64/libQt5Widgets.so.5.15.2 /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw2.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2Imp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2Imp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw2.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2Imp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2Imp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw2.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2Imp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2Imp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw2.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2Imp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2Imp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraint.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraint.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraint.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraint.cpp:43: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw2.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2Imp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2Imp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw2.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2Imp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2Imp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw2.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2Imp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2Imp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw2.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2Imp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2Imp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw2.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2Imp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2Imp.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_DlgPrefsTechDraw2.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2Imp.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgPrefsTechDraw2Imp.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepFaceSet.cpp:61: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintFixed.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintFixed.cpp:42: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 87%] Built target MeshGui [ 87%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskFemConstraintForce.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskFemConstraintForce.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintForce.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintBearing.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintBearing.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintBearing.h:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintBearing.cpp:43: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 87%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/TaskLinkDim.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/TaskLinkDim.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskLinkDim.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraint.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraint.cpp:44: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintFixed.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintFixed.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintFixed.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintFixed.cpp:43: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/App/Sheet.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/PropertiesDialog.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/PropertiesDialog.cpp:25: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintBearing.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintBearing.cpp:44: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraint.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QKeyEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraint.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui/ui_TaskTrajectoryDressUpParameter.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp:31: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 88%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/SoBrepPointSet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/SoBrepPointSet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepPointSet.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui/ui_PropertiesDialog.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/PropertiesDialog.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/qtcolorpicker.h:87:74: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 87 | void insertColor(const QColor &color, const QString &text = QString::null, int index = -1); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qdialog.h:44, from /usr/include/qt5/QtWidgets/QDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/PropertiesDialog.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/PropertiesDialog.cpp:25: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui/ui_PropertiesDialog.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/PropertiesDialog.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/qtcolorpicker.h:87:74: warning: 'QString::null' is deprecated: use QString() [-Wdeprecated-declarations] 87 | void insertColor(const QColor &color, const QString &text = QString::null, int index = -1); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qdialog.h:44, from /usr/include/qt5/QtWidgets/QDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/PropertiesDialog.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Spreadsheet/Gui/PropertiesDialog.cpp:25: /usr/include/qt5/QtCore/qstring.h:954:23: note: declared here 954 | static const Null null; | ^~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintBearing.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintBearing.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintForce.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintForce.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintForce.h:16, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintForce.cpp:43: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp:32: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 88%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskFemConstraintFluidBoundary.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskFemConstraintFluidBoundary.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintFluidBoundary.cpp [ 88%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskFemConstraintPressure.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskFemConstraintPressure.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPressure.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Edge2TracObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Edge2TracObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Edge2TracObject.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 88%] Linking CXX shared library ../../../../Mod/Spreadsheet/SpreadsheetGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Spreadsheet/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/SpreadsheetGui.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,SpreadsheetGui.so -o ../../../../Mod/Spreadsheet/SpreadsheetGui.so CMakeFiles/SpreadsheetGui.dir/qrc_Spreadsheet.cpp.o CMakeFiles/SpreadsheetGui.dir/AppSpreadsheetGui.cpp.o CMakeFiles/SpreadsheetGui.dir/Command.cpp.o CMakeFiles/SpreadsheetGui.dir/LineEdit.cpp.o CMakeFiles/SpreadsheetGui.dir/ViewProviderSpreadsheet.cpp.o CMakeFiles/SpreadsheetGui.dir/SpreadsheetView.cpp.o CMakeFiles/SpreadsheetGui.dir/SpreadsheetDelegate.cpp.o CMakeFiles/SpreadsheetGui.dir/SheetTableView.cpp.o CMakeFiles/SpreadsheetGui.dir/SheetModel.cpp.o CMakeFiles/SpreadsheetGui.dir/PreCompiled.cpp.o CMakeFiles/SpreadsheetGui.dir/Workbench.cpp.o CMakeFiles/SpreadsheetGui.dir/qtcolorpicker.cpp.o CMakeFiles/SpreadsheetGui.dir/PropertiesDialog.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Spreadsheet:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Spreadsheet/Spreadsheet.so ../../../../lib/libFreeCADGui.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 -lCoin /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5Widgets.so.5.15.2 -lpthread /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepPointSet.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepPointSet.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepPointSet.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepPointSet.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepPointSet.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepPointSet.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepPointSet.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepPointSet.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepPointSet.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepPointSet.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepPointSet.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepPointSet.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskLinkDim.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QuantitySpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintForce.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintForce.cpp:43: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 88%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskFemConstraintGear.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskFemConstraintGear.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintGear.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskLinkDim.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskLinkDim.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputVector.h:84:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | LocationDialog(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskLinkDim.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskLinkDim.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskLinkDim.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskLinkDim.cpp:49: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp:32: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:49:57: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 49 | Placement(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Placement.h:113:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 113 | DockablePlacement(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp: In member function 'void RobotGui::TaskTrajectoryDressUpParameter::createPlacementDlg()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp:96:28: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 96 | Gui::Dialog::Placement plc; | ^~~ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 88%] Built target SpreadsheetGui [ 88%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskFemConstraintPulley.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskFemConstraintPulley.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPulley.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_TaskLinkDim.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskLinkDim.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskLinkDim.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskLinkDim.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_TaskLinkDim.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskLinkDim.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskLinkDim.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskLinkDim.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintForce.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintForce.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/SoBrepPointSet.cpp:62: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 88%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/TaskWatcher.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/TaskWatcher.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskWatcher.cpp [ 88%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProvider.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProvider.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintFluidBoundary.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintFluidBoundary.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintFluidBoundary.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintFluidBoundary.cpp:46: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 89%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/DlgTemplateField.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/DlgTemplateField.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DlgTemplateField.cpp [ 89%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskFemConstraintDisplacement.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskFemConstraintDisplacement.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintDisplacement.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPulley.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPulley.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintBearing.h:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPulley.cpp:30: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintGear.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintGear.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintBearing.h:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintGear.cpp:44: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintPressure.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPressure.cpp:43: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintFluidBoundary.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintFluidBoundary.cpp:47: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPressure.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPressure.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPressure.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPressure.cpp:44: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintGear.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintGear.cpp:45: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintFluidBoundary.cpp:53: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintFluidBoundary.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPulley.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPulley.cpp:31: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintPressure.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPressure.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPressure.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 89%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/TaskSectionView.cpp.o In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintPressure.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPressure.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPressure.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/TaskSectionView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskSectionView.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintPressure.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPressure.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPressure.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintPressure.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPressure.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPressure.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintPressure.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPressure.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPressure.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintGear.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintGear.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPulley.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPulley.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskWatcher.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskWatcher.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskWatcher.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskWatcher.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskWatcher.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskWatcher.cpp:32: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskWatcher.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskWatcher.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskWatcher.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskWatcher.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskWatcher.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskWatcher.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 89%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderExt.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderExt.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.cpp [ 89%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskFemConstraintTemperature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskFemConstraintTemperature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTemperature.cpp [ 89%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskFemConstraintHeatflux.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskFemConstraintHeatflux.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintHeatflux.cpp [ 89%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderReference.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderReference.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderReference.cpp [ 89%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/TaskDlgSimulate.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/TaskDlgSimulate.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgSimulate.cpp [ 89%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskFemConstraintInitialTemperature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskFemConstraintInitialTemperature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintInitialTemperature.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskSectionView.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintDisplacement.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintDisplacement.cpp:45: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskSectionView.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskSectionView.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintDisplacement.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintDisplacement.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintDisplacement.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintDisplacement.cpp:46: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskSectionView.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskSectionView.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskSectionView.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskSectionView.cpp:48: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 89%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/TaskGeomHatch.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/TaskGeomHatch.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.cpp:109: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.cpp:96: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.cpp:109: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.cpp:96: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.cpp:109: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.cpp:96: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.cpp:109: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.cpp:96: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.cpp:109: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.cpp:96: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.cpp:109: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.cpp:96: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderReference.cpp:81: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintTemperature.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTemperature.cpp:45: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.cpp:106: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTemperature.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTemperature.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTemperature.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTemperature.cpp:46: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintHeatflux.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintHeatflux.cpp:45: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 89%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskFemConstraintPlaneRotation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskFemConstraintPlaneRotation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPlaneRotation.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.cpp:120: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.cpp:120: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintHeatflux.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintHeatflux.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintHeatflux.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintHeatflux.cpp:46: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgSimulate.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgSimulate.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintInitialTemperature.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintInitialTemperature.cpp:44: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintTemperature.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTemperature.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTemperature.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintTemperature.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTemperature.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTemperature.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintTemperature.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTemperature.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTemperature.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintTemperature.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTemperature.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTemperature.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintTemperature.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTemperature.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTemperature.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderReference.cpp:84: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderReference.cpp:83: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderReference.cpp:84: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderReference.cpp:83: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderReference.cpp:84: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderReference.cpp:83: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderReference.cpp:84: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderReference.cpp:83: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderReference.cpp:84: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderReference.cpp:83: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderReference.cpp:84: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderReference.cpp:83: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintHeatflux.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintHeatflux.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintHeatflux.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintHeatflux.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintHeatflux.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintHeatflux.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintHeatflux.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintHeatflux.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintHeatflux.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintHeatflux.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintHeatflux.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintHeatflux.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintHeatflux.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintHeatflux.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintHeatflux.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintInitialTemperature.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintInitialTemperature.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintInitialTemperature.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintInitialTemperature.cpp:45: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgSimulate.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgSimulate.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgSimulate.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgSimulate.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgSimulate.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgSimulate.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintInitialTemperature.h:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintInitialTemperature.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintInitialTemperature.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintInitialTemperature.h:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintInitialTemperature.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintInitialTemperature.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintInitialTemperature.h:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintInitialTemperature.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintInitialTemperature.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintInitialTemperature.h:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintInitialTemperature.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintInitialTemperature.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintInitialTemperature.h:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintInitialTemperature.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintInitialTemperature.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 89%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderBox.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderBox.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderBox.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgSimulate.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgSimulate.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskRobot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgSimulate.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgSimulate.cpp:29: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPlaneRotation.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPlaneRotation.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPlaneRotation.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPlaneRotation.cpp:45: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 89%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/TaskDlgEdge2Trac.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/TaskDlgEdge2Trac.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgEdge2Trac.cpp [ 89%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskFemConstraintContact.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskFemConstraintContact.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintContact.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.cpp:48: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_TaskGeomHatch.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_TaskGeomHatch.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_TaskGeomHatch.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_TaskGeomHatch.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_TaskGeomHatch.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 89%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskFemConstraintTransform.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskFemConstraintTransform.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTransform.cpp [ 90%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/TaskDlgTrajectoryCompound.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/TaskDlgTrajectoryCompound.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryCompound.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPlaneRotation.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPlaneRotation.cpp:45: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 90%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderCompound.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderCompound.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCompound.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderBox.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderBox.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 90%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/DrawGuiUtil.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/DrawGuiUtil.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DrawGuiUtil.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPlaneRotation.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPlaneRotation.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 90%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/Rez.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/Rez.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/Rez.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgEdge2Trac.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgEdge2Trac.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintTransform.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTransform.cpp:46: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTransform.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTransform.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTransform.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTransform.cpp:47: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintContact.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintContact.cpp:45: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgEdge2Trac.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgEdge2Trac.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgEdge2Trac.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgEdge2Trac.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgEdge2Trac.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgEdge2Trac.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryCompound.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryCompound.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 90%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/qrc_Fem.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/qrc_Fem.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/qrc_Fem.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintContact.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintContact.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintContact.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintContact.cpp:46: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskEdge2TracParameter.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgEdge2Trac.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgEdge2Trac.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskEdge2TracParameter.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgEdge2Trac.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgEdge2Trac.cpp:30: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 90%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemMesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemMesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemMesh.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryCompound.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryCompound.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryCompound.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryCompound.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryCompound.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryCompound.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/trajectory.hpp:60, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Trajectory.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/TrajectoryCompound.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryCompound.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryCompound.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ [ 90%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemMeshShape.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemMeshShape.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemMeshShape.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgEdge2Trac.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgEdge2Trac.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintContact.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintContact.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintContact.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintContact.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintContact.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintContact.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintContact.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintContact.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintContact.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintContact.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintContact.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintContact.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/InputField.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskFemConstraintContact.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintContact.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintContact.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/regex/v4/regex_workaround.hpp:44, from /usr/include/boost/regex/v4/regex.hpp:32, from /usr/include/boost/regex.hpp:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DrawGuiUtil.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCompound.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskSelectLinkProperty.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryCompound.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskSelectLinkProperty.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryCompound.cpp:32: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryCompound.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryCompound.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 90%] Building CXX object src/Mod/Robot/Gui/CMakeFiles/RobotGui.dir/TaskDlgTrajectoryDressUp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DRobotGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/RobotGui.dir/TaskDlgTrajectoryDressUp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryDressUp.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DrawGuiUtil.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DrawGuiUtil.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DrawGuiUtil.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DrawGuiUtil.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DrawGuiUtil.cpp:64: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DrawGuiUtil.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DrawGuiUtil.cpp:64: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DrawGuiUtil.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DrawGuiUtil.cpp:64: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DrawGuiUtil.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DrawGuiUtil.cpp:64: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DrawGuiUtil.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DrawGuiUtil.cpp:64: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DrawGuiUtil.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DrawGuiUtil.cpp:64: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/DrawGuiUtil.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 90%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemMeshShapeNetgen.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemMeshShapeNetgen.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemMeshShapeNetgen.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemMesh.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemMeshShape.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemMeshShape.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 90%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderAnalysis.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderAnalysis.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderAnalysis.cpp [ 90%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/MDIViewPage.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/MDIViewPage.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp [ 90%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderCircleParametric.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderCircleParametric.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCircleParametric.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemMesh.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemMesh.cpp:53: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 90%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGVPage.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGVPage.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGVPage.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderAnalysis.cpp:28: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 90%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderSolver.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderSolver.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderSolver.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:41: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryDressUp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryDressUp.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemMesh.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemMeshShape.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemMeshShapeNetgen.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemMeshShapeNetgen.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryDressUp.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryDressUp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame::Frame(const KDL::Frame&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:436:21: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 436 | p(arg.p),M(arg.M) | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryDressUp.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryDressUp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:316:23: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 316 | inline Rotation& operator=(const Rotation& arg); | ^~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.hpp:1263, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/segment.hpp:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/chain.hpp:25, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/Robot6Axis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/RobotObject.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryDressUp.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryDressUp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In member function 'KDL::Rotation KDL::Rotation::Inverse() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:634:23: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 634 | Rotation tmp(*this); | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:636:12: warning: implicitly-declared 'constexpr KDL::Rotation::Rotation(const KDL::Rotation&)' is deprecated [-Wdeprecated-copy] 636 | return tmp; | ^~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:515:11: note: because 'KDL::Rotation' has user-provided 'KDL::Rotation& KDL::Rotation::operator=(const KDL::Rotation&)' 515 | Rotation& Rotation::operator=(const Rotation& arg) { | ^~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl: In copy constructor 'KDL::Frame2::Frame2(const KDL::Frame2&)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:967:22: warning: implicitly-declared 'constexpr KDL::Rotation2::Rotation2(const KDL::Rotation2&)' is deprecated [-Wdeprecated-copy] 967 | p(arg.p), M(arg.M) | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/App/kdl_cp/frames.inl:844:20: note: because 'KDL::Rotation2' has user-provided 'KDL::Rotation2& KDL::Rotation2::operator=(const KDL::Rotation2&)' 844 | IMETHOD Rotation2& Rotation2::operator=(const Rotation2& arg) { | ^~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCircleParametric.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCircleParametric.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderAnalysis.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderAnalysis.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryDressUp.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryDressUp.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskTrajectoryDressUpParameter.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryDressUp.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryDressUp.cpp:29: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryDressUp.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:43, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryDressUp.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Robot/Gui/TaskDlgTrajectoryDressUp.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderSolver.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderSolver.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGVPage.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGVPage.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGVPage.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGVPage.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGVPage.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGVPage.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 90%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderLineParametric.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderLineParametric.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderLineParametric.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 90%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderSetNodes.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderSetNodes.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderSetNodes.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGVPage.cpp:45: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 90%] Linking CXX shared library ../../../../Mod/Robot/RobotGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Robot/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/RobotGui.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,RobotGui.so -o ../../../../Mod/Robot/RobotGui.so CMakeFiles/RobotGui.dir/qrc_Robot.cpp.o CMakeFiles/RobotGui.dir/AppRobotGui.cpp.o CMakeFiles/RobotGui.dir/PreCompiled.cpp.o CMakeFiles/RobotGui.dir/Workbench.cpp.o CMakeFiles/RobotGui.dir/ViewProviderRobotObject.cpp.o CMakeFiles/RobotGui.dir/ViewProviderTrajectory.cpp.o CMakeFiles/RobotGui.dir/ViewProviderEdge2TracObject.cpp.o CMakeFiles/RobotGui.dir/ViewProviderTrajectoryCompound.cpp.o CMakeFiles/RobotGui.dir/ViewProviderTrajectoryDressUp.cpp.o CMakeFiles/RobotGui.dir/Command.cpp.o CMakeFiles/RobotGui.dir/CommandTrajectory.cpp.o CMakeFiles/RobotGui.dir/CommandInsertRobot.cpp.o CMakeFiles/RobotGui.dir/CommandExport.cpp.o CMakeFiles/RobotGui.dir/TaskRobot6Axis.cpp.o CMakeFiles/RobotGui.dir/TaskTrajectory.cpp.o CMakeFiles/RobotGui.dir/TaskRobotMessages.cpp.o CMakeFiles/RobotGui.dir/TaskRobotControl.cpp.o CMakeFiles/RobotGui.dir/TrajectorySimulate.cpp.o CMakeFiles/RobotGui.dir/TaskEdge2TracParameter.cpp.o CMakeFiles/RobotGui.dir/TaskTrajectoryDressUpParameter.cpp.o CMakeFiles/RobotGui.dir/TaskWatcher.cpp.o CMakeFiles/RobotGui.dir/TaskDlgSimulate.cpp.o CMakeFiles/RobotGui.dir/TaskDlgEdge2Trac.cpp.o CMakeFiles/RobotGui.dir/TaskDlgTrajectoryCompound.cpp.o CMakeFiles/RobotGui.dir/TaskDlgTrajectoryDressUp.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Robot:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part: -lmpi_cxx -lmpi ../../../../Mod/Robot/Robot.so ../../../../lib/libFreeCADGui.so ../../../../Mod/Part/Part.so /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so /usr/lib64/libfreetype.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 -lCoin /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5Widgets.so.5.15.2 -lpthread /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp: In constructor 'TechDrawGui::MDIViewPage::MDIViewPage(TechDrawGui::ViewProviderPage*, Gui::Document*, QWidget*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:106:22: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 106 | m_frameState(true) | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 90%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderSetElements.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderSetElements.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderSetElements.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp: In member function 'virtual void TechDrawGui::MDIViewPage::printPdf()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:558:94: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 558 | QString(), filter.join(QLatin1String(";;"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp: In member function 'void TechDrawGui::MDIViewPage::printPdf(std::string)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:581:75: warning: 'void QPrinter::setOrientation(QPrinter::Orientation)' is deprecated: Use setPageOrientation() instead. [-Wdeprecated-declarations] 581 | printer.setOrientation((QPrinter::Orientation) (1 - m_orientation)); //reverse 0/1 | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:38: /usr/include/qt5/QtPrintSupport/qprinter.h:172:10: note: declared here 172 | void setOrientation(Orientation); | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:583:45: warning: 'void QPrinter::setOrientation(QPrinter::Orientation)' is deprecated: Use setPageOrientation() instead. [-Wdeprecated-declarations] 583 | printer.setOrientation(m_orientation); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:38: /usr/include/qt5/QtPrintSupport/qprinter.h:172:10: note: declared here 172 | void setOrientation(Orientation); | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:585:37: warning: 'void QPrinter::setPaperSize(QPrinter::PaperSize)' is deprecated: Use setPageSize(QPageSize) instead. [-Wdeprecated-declarations] 585 | printer.setPaperSize(m_paperSize); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:38: /usr/include/qt5/QtPrintSupport/qprinter.h:185:10: note: declared here 185 | void setPaperSize(PaperSize); | ^~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp: In member function 'virtual void TechDrawGui::MDIViewPage::print()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:593:37: warning: 'void QPrinter::setPaperSize(QPrinter::PaperSize)' is deprecated: Use setPageSize(QPageSize) instead. [-Wdeprecated-declarations] 593 | printer.setPaperSize(m_paperSize); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:38: /usr/include/qt5/QtPrintSupport/qprinter.h:185:10: note: declared here 185 | void setPaperSize(PaperSize); | ^~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:594:41: warning: 'void QPrinter::setOrientation(QPrinter::Orientation)' is deprecated: Use setPageOrientation() instead. [-Wdeprecated-declarations] 594 | printer.setOrientation(m_orientation); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:38: /usr/include/qt5/QtPrintSupport/qprinter.h:172:10: note: declared here 172 | void setOrientation(Orientation); | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp: In member function 'virtual void TechDrawGui::MDIViewPage::printPreview()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:605:37: warning: 'void QPrinter::setPaperSize(QPrinter::PaperSize)' is deprecated: Use setPageSize(QPageSize) instead. [-Wdeprecated-declarations] 605 | printer.setPaperSize(m_paperSize); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:38: /usr/include/qt5/QtPrintSupport/qprinter.h:185:10: note: declared here 185 | void setPaperSize(PaperSize); | ^~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:606:41: warning: 'void QPrinter::setOrientation(QPrinter::Orientation)' is deprecated: Use setPageOrientation() instead. [-Wdeprecated-declarations] 606 | printer.setOrientation(m_orientation); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:38: /usr/include/qt5/QtPrintSupport/qprinter.h:172:10: note: declared here 172 | void setOrientation(Orientation); | ^~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp: In member function 'virtual void TechDrawGui::MDIViewPage::print(QPrinter*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:633:63: warning: 'QPrinter::PaperSize QPrinter::paperSize() const' is deprecated: pageLayout().pageSize().id() [-Wdeprecated-declarations] 633 | QPrinter::PaperSize psPrtSetting = printer->paperSize(); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:38: /usr/include/qt5/QtPrintSupport/qprinter.h:187:15: note: declared here 187 | PaperSize paperSize() const; | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:639:45: warning: 'QPrinter::Orientation QPrinter::orientation() const' is deprecated: Use pageLayout().orientation() instead. [-Wdeprecated-declarations] 639 | if (doPrint && printer->orientation() != m_orientation) { | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:38: /usr/include/qt5/QtPrintSupport/qprinter.h:174:17: note: declared here 174 | Orientation orientation() const; | ^~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:674:43: warning: 'QRect QPrinter::paperRect() const' is deprecated: Use pageLayout().fullRectPixels(resolution()) instead. [-Wdeprecated-declarations] 674 | QRect targetRect = printer->paperRect(); | ^ In file included from /usr/include/qt5/QtPrintSupport/QPrinter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:38: /usr/include/qt5/QtPrintSupport/qprinter.h:257:11: note: declared here 257 | QRect paperRect() const; | ^~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp: In member function 'void TechDrawGui::MDIViewPage::saveSVG()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:817:94: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 817 | QString(), filter.join(QLatin1String(";;"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp: In member function 'void TechDrawGui::MDIViewPage::saveDXF()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:843:96: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 843 | QString::fromUtf8(QT_TR_NOOP("Dxf (*.dxf)"))); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderSolver.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderSolver.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderSolver.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGVPage.cpp: In member function 'virtual void TechDrawGui::QGVPage::wheelEvent(QWheelEvent*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGVPage.cpp:719:53: warning: 'int QWheelEvent::delta() const' is deprecated: Use angleDelta() [-Wdeprecated-declarations] 719 | qreal factor = std::pow(mouseBase, event->delta() / mouseAdjust); | ^ In file included from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGVPage.cpp:27: /usr/include/qt5/QtGui/qevent.h:219:16: note: declared here 219 | inline int delta() const { return qt4D; } | ^~~~~ gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 90%] Built target RobotGui [ 90%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderSetFaces.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderSetFaces.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderSetFaces.cpp [ 90%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderSetGeometry.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderSetGeometry.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderSetGeometry.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderLineParametric.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderLineParametric.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 90%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGCustomText.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGCustomText.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGCustomText.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderSetElements.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderSetElements.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderSetNodes.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderSetNodes.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 90%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderPointParametric.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderPointParametric.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderPointParametric.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgCreateNodeSet.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderSetNodes.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgCreateNodeSet.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderSetNodes.cpp:31: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 90%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGICaption.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGICaption.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGICaption.cpp [ 90%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/FemSelectionGate.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/FemSelectionGate.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/FemSelectionGate.cpp [ 90%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemConstraint.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemConstraint.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraint.cpp [ 90%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemConstraintBearing.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemConstraintBearing.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintBearing.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderSetFaces.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderSetFaces.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderSetGeometry.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderSetGeometry.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 90%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemConstraintFixed.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemConstraintFixed.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintFixed.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGCustomText.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 90%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderEllipseParametric.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderEllipseParametric.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderEllipseParametric.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SelectionFilter.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/FemSelectionGate.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/FemSelectionGate.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraint.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraint.cpp:47: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 90%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGCustomRect.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGCustomRect.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGCustomRect.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderPointParametric.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderPointParametric.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraint.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraint.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraint.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraint.cpp:48: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraint.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraint.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraint.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintBearing.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintBearing.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 90%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderHelixParametric.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderHelixParametric.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderHelixParametric.cpp [ 90%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemConstraintForce.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemConstraintForce.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintForce.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintBearing.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintBearing.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintBearing.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintBearing.cpp:37: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 90%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderPlaneParametric.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderPlaneParametric.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderPlaneParametric.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraint.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintFixed.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintFixed.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 90%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemConstraintFluidBoundary.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemConstraintFluidBoundary.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintFluidBoundary.cpp [ 90%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemConstraintPressure.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemConstraintPressure.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintPressure.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintFixed.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintFixed.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintFixed.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintFixed.cpp:38: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 90%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGCustomSvg.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGCustomSvg.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGCustomSvg.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderEllipseParametric.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderEllipseParametric.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 90%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGCustomClip.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGCustomClip.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGCustomClip.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraint.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintForce.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintForce.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderSpline.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderHelixParametric.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderHelixParametric.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintForce.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintForce.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintForce.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintForce.cpp:38: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 90%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderSphereParametric.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderSphereParametric.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderSphereParametric.cpp [ 90%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGCustomLabel.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGCustomLabel.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGCustomLabel.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintPressure.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintPressure.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 90%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderCylinderParametric.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderCylinderParametric.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCylinderParametric.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderPlaneParametric.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderPlaneParametric.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 90%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemConstraintGear.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemConstraintGear.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintGear.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraint.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintFluidBoundary.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintFluidBoundary.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPressure.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintPressure.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPressure.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintPressure.cpp:37: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintFluidBoundary.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintFluidBoundary.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintFluidBoundary.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintFluidBoundary.cpp:38: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 90%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGCustomBorder.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGCustomBorder.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGCustomBorder.cpp [ 90%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderConeParametric.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderConeParametric.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderConeParametric.cpp [ 91%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemConstraintPulley.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemConstraintPulley.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintPulley.cpp [ 91%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemConstraintDisplacement.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemConstraintDisplacement.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintDisplacement.cpp [ 91%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGCustomImage.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGCustomImage.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGCustomImage.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderSphereParametric.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderSphereParametric.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCylinderParametric.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCylinderParametric.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraint.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintGear.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintGear.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintGear.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintGear.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintGear.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintGear.cpp:38: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 91%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderPrism.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderPrism.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderPrism.cpp [ 91%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGDisplayArea.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGDisplayArea.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGDisplayArea.cpp [ 91%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderRegularPolygon.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderRegularPolygon.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderRegularPolygon.cpp [ 91%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGIView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGIView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIView.cpp [ 91%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemConstraintTemperature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemConstraintTemperature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintTemperature.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintDisplacement.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintDisplacement.cpp:38: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderConeParametric.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderConeParametric.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraint.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintPulley.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintPulley.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPulley.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintPulley.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPulley.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintPulley.cpp:37: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintDisplacement.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintDisplacement.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintDisplacement.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintDisplacement.cpp:39: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintTemperature.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintTemperature.cpp:45: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 91%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderTorusParametric.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderTorusParametric.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderTorusParametric.cpp [ 91%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGIArrow.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGIArrow.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIArrow.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderPrism.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderPrism.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 91%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemConstraintHeatflux.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemConstraintHeatflux.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintHeatflux.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderRegularPolygon.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderRegularPolygon.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 91%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemConstraintInitialTemperature.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemConstraintInitialTemperature.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintInitialTemperature.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTemperature.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintTemperature.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTemperature.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintTemperature.cpp:46: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 91%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderCurveNet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderCurveNet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCurveNet.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIView.cpp:41: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 91%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderSpline.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderSpline.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderSpline.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIView.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIView.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 91%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemConstraintPlaneRotation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemConstraintPlaneRotation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintPlaneRotation.cpp [ 91%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGIEdge.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGIEdge.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIEdge.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderTorusParametric.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderTorusParametric.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintHeatflux.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintHeatflux.cpp:44: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 91%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGIFace.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGIFace.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIFace.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintInitialTemperature.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintInitialTemperature.cpp:44: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCurveNet.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCurveNet.cpp:51: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCurveNet.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCurveNet.cpp:51: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCurveNet.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCurveNet.cpp:51: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCurveNet.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCurveNet.cpp:51: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCurveNet.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCurveNet.cpp:51: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCurveNet.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qcolor.h:43, from /usr/include/qt5/QtGui/QColor:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCurveNet.cpp:51: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintHeatflux.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintHeatflux.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintHeatflux.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintHeatflux.cpp:45: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderSpline.cpp:50: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 91%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderImport.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderImport.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderImport.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintPlaneRotation.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintPlaneRotation.cpp:45: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintInitialTemperature.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintInitialTemperature.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintInitialTemperature.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintInitialTemperature.cpp:45: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderCurveNet.cpp:51: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 91%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGISVGTemplate.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGISVGTemplate.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGISVGTemplate.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPlaneRotation.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintPlaneRotation.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintPlaneRotation.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintPlaneRotation.cpp:46: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 91%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemConstraintContact.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemConstraintContact.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintContact.cpp [ 91%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemConstraintTransform.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemConstraintTransform.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintTransform.cpp [ 91%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderResult.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderResult.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderResult.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIFace.cpp:50: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 91%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderExtrusion.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderExtrusion.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExtrusion.cpp [ 91%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProvider2DObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProvider2DObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider2DObject.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIFace.cpp: In member function 'void TechDrawGui::QGIFace::buildSvgHatch()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIFace.cpp:517:71: warning: 'QByteArray& QByteArray::append(const QString&)' is deprecated: Use QString's toUtf8(), toLatin1() or toLocal8Bit() [-Wdeprecated-declarations] 517 | before.append(QString::fromStdString(SVGCOLPREFIX + SVGCOLDEFAULT)); | ^ In file included from /usr/include/qt5/QtGui/qkeysequence.h:44, from /usr/include/qt5/QtWidgets/qaction.h:44, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIFace.cpp:25: /usr/include/qt5/QtCore/qstring.h:1507:20: note: declared here 1507 | inline QByteArray &QByteArray::append(const QString &s) | ^~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIFace.cpp:518:65: warning: 'QByteArray& QByteArray::append(const QString&)' is deprecated: Use QString's toUtf8(), toLatin1() or toLocal8Bit() [-Wdeprecated-declarations] 518 | after.append(QString::fromStdString(SVGCOLPREFIX + m_svgCol)); | ^ In file included from /usr/include/qt5/QtGui/qkeysequence.h:44, from /usr/include/qt5/QtWidgets/qaction.h:44, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIFace.cpp:25: /usr/include/qt5/QtCore/qstring.h:1507:20: note: declared here 1507 | inline QByteArray &QByteArray::append(const QString &s) | ^~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderImport.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderImport.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintContact.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintContact.cpp:44: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderImport.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyUnits.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderImport.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderImport.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderImport.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyUnits.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderImport.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderImport.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderImport.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyUnits.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderImport.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderImport.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderImport.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyUnits.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderImport.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderImport.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderImport.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyUnits.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderImport.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderImport.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderImport.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyUnits.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderImport.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderImport.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraint.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/App/FemConstraintTransform.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintTransform.cpp:48: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintContact.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintContact.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintContact.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintContact.cpp:45: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 91%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGIVertex.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGIVertex.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIVertex.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/regex/v4/regex_workaround.hpp:44, from /usr/include/boost/regex/v4/regex.hpp:32, from /usr/include/boost/regex.hpp:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGISVGTemplate.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderResult.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderResult.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTransform.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintTransform.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskFemConstraintTransform.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemConstraintTransform.cpp:49: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 91%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderMirror.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderMirror.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderMirror.cpp [ 91%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskDlgCreateNodeSet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskDlgCreateNodeSet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgCreateNodeSet.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExtrusion.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExtrusion.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider2DObject.cpp:45: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 91%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGIMatting.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGIMatting.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIMatting.cpp [ 91%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskDlgMeshShapeNetgen.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskDlgMeshShapeNetgen.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgMeshShapeNetgen.cpp [ 91%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskDlgAnalysis.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskDlgAnalysis.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgAnalysis.cpp [ 91%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderPython.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderPython.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderPython.cpp [ 91%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderBoolean.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderBoolean.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderBoolean.cpp [ 91%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGIDrawingTemplate.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGIDrawingTemplate.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIDrawingTemplate.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/FeatureMirroring.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderMirror.cpp:45: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 91%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGITemplate.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGITemplate.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGITemplate.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgCreateNodeSet.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgCreateNodeSet.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderMirror.cpp:53: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderMirror.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderMirror.cpp:55: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderMirror.cpp:55: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderMirror.cpp:55: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.h:84:98: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | DlgFilletEdges(FilletType type, Part::FilletBase*, QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderMirror.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderMirror.cpp:55: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.h:124:124: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 124 | FilletEdgesDialog(DlgFilletEdges::FilletType type, Part::FilletBase* fillet, QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderMirror.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderMirror.cpp:55: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/DlgFilletEdges.h:137:82: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 137 | DlgChamferEdges(Part::FilletBase*, QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderMirror.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgCreateNodeSet.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgCreateNodeSet.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgCreateNodeSet.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgCreateNodeSet.cpp:29: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgCreateNodeSet.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:43, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgCreateNodeSet.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgCreateNodeSet.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderPython.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgMeshShapeNetgen.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgMeshShapeNetgen.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskSelectLinkProperty.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgMeshShapeNetgen.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskSelectLinkProperty.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgMeshShapeNetgen.cpp:34: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderBoolean.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderBoolean.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgAnalysis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgAnalysis.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgMeshShapeNetgen.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgMeshShapeNetgen.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskSelectLinkProperty.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgAnalysis.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskSelectLinkProperty.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgAnalysis.cpp:33: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 91%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/ViewProviderRuledSurface.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/ViewProviderRuledSurface.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderRuledSurface.cpp [ 91%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskObjectName.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskObjectName.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskObjectName.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIDrawingTemplate.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgAnalysis.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:43, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgAnalysis.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDlgAnalysis.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawTemplate.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGITemplate.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 91%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskCreateNodeSet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskCreateNodeSet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.cpp [ 91%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/Workbench.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/Workbench.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Workbench.cpp [ 91%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskDriver.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskDriver.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.cpp [ 91%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/TaskFaceColors.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/TaskFaceColors.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp [ 91%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGIViewCollection.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGIViewCollection.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIViewCollection.cpp [ 91%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGIViewDimension.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGIViewDimension.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIViewDimension.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskObjectName.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskObjectName.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskObjectName.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskObjectName.cpp:32: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderRuledSurface.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderRuledSurface.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskObjectName.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskObjectName.cpp:32: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskCreateNodeSet.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.cpp:31: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Workbench.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/Workbench.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskObjectName.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskObjectName.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.cpp:32: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.cpp:32: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 91%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/TaskShapeBuilder.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/TaskShapeBuilder.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskShapeBuilder.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:48: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskCreateNodeSet.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.cpp:32: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIViewCollection.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskFaceColors.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontmetrics.h:43, from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskFaceColors.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontmetrics.h:43, from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskFaceColors.h:16, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:51: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 91%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/TaskLoft.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/TaskLoft.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskLoft.cpp [ 91%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/TaskOffset.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/TaskOffset.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskOffset.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskDriver.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:48: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIViewDimension.cpp:42: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 91%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGIProjGroup.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGIProjGroup.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIProjGroup.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontmetrics.h:43, from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 91%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskAnalysisInfo.cpp.o [ 91%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskTetParameter.cpp.o In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontmetrics.h:43, from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontmetrics.h:43, from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontmetrics.h:43, from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskAnalysisInfo.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskAnalysisInfo.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskTetParameter.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontmetrics.h:43, from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontmetrics.h:43, from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontmetrics.h:43, from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qfontmetrics.h:43, from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp: In member function 'void PartGui::FaceColors::updatePanel()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:399:23: warning: 'int QFontMetrics::width(const QString&, int) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 399 | if (fm.width(faces) > maxWidth) { | ^ In file included from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskFaceColors.cpp:35: /usr/include/qt5/QtGui/qfontmetrics.h:106:9: note: declared here 106 | int width(const QString &, int len = -1) const; | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskOffset.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskOffset.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskOffset.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskOffset.cpp:31: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskLoft.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskLoft.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskLoft.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskLoft.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskLoft.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskLoft.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskLoft.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskLoft.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskLoft.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskLoft.cpp:37: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskShapeBuilder.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QuantitySpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskOffset.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskOffset.cpp:31: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskShapeBuilder.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskShapeBuilder.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskShapeBuilder.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskShapeBuilder.cpp:37: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 91%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGIViewPart.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGIViewPart.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIViewPart.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskTetParameter.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.cpp:31: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskAnalysisInfo.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskAnalysisInfo.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskAnalysisInfo.h:14, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskAnalysisInfo.cpp:31: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskShapeBuilder.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qbuttongroup.h:43, from /usr/include/qt5/QtWidgets/QButtonGroup:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskShapeBuilder.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskOffset.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskOffset.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskLoft.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskLoft.cpp:38: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.cpp:32: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskLoft.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskLoft.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIProjGroup.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskAnalysisInfo.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskAnalysisInfo.cpp:32: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 91%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/TaskSweep.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/TaskSweep.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskSweep.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskTetParameter.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskAnalysisInfo.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskAnalysisInfo.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 92%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/TaskThickness.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/TaskThickness.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskThickness.cpp [ 92%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/TaskDimension.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/TaskDimension.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.cpp [ 92%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/TaskPostBoxes.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/TaskPostBoxes.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.cpp [ 92%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/AppFemGui.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/AppFemGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/AppFemGui.cpp [ 92%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/AppFemGuiPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/AppFemGuiPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/AppFemGuiPy.cpp [ 92%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGIViewSection.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGIViewSection.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIViewSection.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIViewPart.cpp:44: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskSweep.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskSweep.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskSweep.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskSweep.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskSweep.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskSweep.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/MDIViewPage.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIViewPart.cpp:78: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qmath.h:47, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIViewPart.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskSweep.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskSweep.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskSweep.h:16, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskSweep.cpp:41: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskThickness.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskThickness.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskOffset.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskThickness.cpp:32: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskPostDisplay.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.cpp:29: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskSweep.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskSweep.cpp:42: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/../App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/../App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.cpp:72: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/AppFemGui.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.h:115:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 115 | DlgPreferencesImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/AppFemGui.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/AppFemGui.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.h:54:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 54 | DlgCustomizeImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/AppFemGui.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/App/DocumentObjectPy.h:8, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/AppFemGuiPy.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QuantitySpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskOffset.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskThickness.cpp:32: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskSweep.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskSweep.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 92%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/TaskCheckGeometry.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/TaskCheckGeometry.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskCheckGeometry.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskThickness.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/qeventloop.h:43, from /usr/include/qt5/QtCore/QEventLoop:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskThickness.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/PropertyFemMeshItem.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/AppFemGui.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/AppFemGui.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/PropertyFemMeshItem.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/AppFemGui.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/AppFemGui.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemCcx.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemCcxImp.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/AppFemGui.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/AppFemGui.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemCcx.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemCcxImp.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/AppFemGui.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/AppFemGui.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_DlgSettingsFemCcx.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/DlgSettingsFemCcxImp.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/AppFemGui.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/AppFemGui.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.cpp:36: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawGeomHatch.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIViewSection.cpp:45: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.cpp:75: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qbuttongroup.h:43, from /usr/include/qt5/QtWidgets/QButtonGroup:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.cpp:76: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qbuttongroup.h:43, from /usr/include/qt5/QtWidgets/QButtonGroup:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.cpp:77: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qbuttongroup.h:43, from /usr/include/qt5/QtWidgets/QButtonGroup:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.cpp:77: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qbuttongroup.h:43, from /usr/include/qt5/QtWidgets/QButtonGroup:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.cpp:77: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qbuttongroup.h:43, from /usr/include/qt5/QtWidgets/QButtonGroup:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.cpp:77: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qbuttongroup.h:43, from /usr/include/qt5/QtWidgets/QButtonGroup:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.cpp:77: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qbuttongroup.h:43, from /usr/include/qt5/QtWidgets/QButtonGroup:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.cpp:77: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qbuttongroup.h:43, from /usr/include/qt5/QtWidgets/QButtonGroup:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/AppFemGui.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.cpp:81: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskDimension.cpp:81: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/AppFemGuiPy.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/qfileinfo.h:43, from /usr/include/qt5/QtCore/QFileInfo:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/AppFemGuiPy.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskPostDisplay.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskPostDisplay.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskPostDisplay.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskPostDisplay.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskPostDisplay.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskPostDisplay.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskPostDisplay.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui/ui_TaskPostDisplay.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 92%] Building CXX object src/Mod/Part/Gui/CMakeFiles/PartGui.dir/TaskAttacher.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartGui.dir/TaskAttacher.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskAttacher.cpp [ 92%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGIViewAnnotation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGIViewAnnotation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIViewAnnotation.cpp [ 92%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGIViewSymbol.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGIViewSymbol.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIViewSymbol.cpp [ 92%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/AbaqusHighlighter.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/AbaqusHighlighter.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/AbaqusHighlighter.cpp [ 92%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGIViewSpreadsheet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGIViewSpreadsheet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIViewSpreadsheet.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskAttacher.cpp:33: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 92%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ActiveAnalysisObserver.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ActiveAnalysisObserver.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ActiveAnalysisObserver.cpp [ 92%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/../App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/../App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskCheckGeometry.cpp:63: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 92%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/PreCompiled.cpp [ 92%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/PropertyFemMeshItem.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/PropertyFemMeshItem.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/PropertyFemMeshItem.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskCheckGeometry.cpp:66: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qboxlayout.h:43, from /usr/include/qt5/QtWidgets/QBoxLayout:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskCheckGeometry.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskCheckGeometry.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskCheckGeometry.cpp:71: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskCheckGeometry.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskCheckGeometry.cpp:71: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskCheckGeometry.cpp: In member function 'virtual Standard_Boolean PartGui::BOPProgressIndicator::Show(Standard_Boolean)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskCheckGeometry.cpp:984:20: warning: 'void QTime::start()' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 984 | time.start(); | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskCheckGeometry.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskCheckGeometry.cpp:71: /usr/include/qt5/QtCore/qdatetime.h:235:55: note: declared here 235 | QT_DEPRECATED_X("Use QElapsedTimer instead") void start(); | ^~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskCheckGeometry.cpp: In member function 'virtual Standard_Boolean PartGui::BOPProgressIndicator::UserBreak()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskCheckGeometry.cpp:1015:26: warning: 'int QTime::elapsed() const' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 1015 | if (time.elapsed() > 1000) { | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskCheckGeometry.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskCheckGeometry.cpp:71: /usr/include/qt5/QtCore/qdatetime.h:237:54: note: declared here 237 | QT_DEPRECATED_X("Use QElapsedTimer instead") int elapsed() const; | ^~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskCheckGeometry.cpp:1016:26: warning: 'int QTime::restart()' is deprecated: Use QElapsedTimer instead [-Wdeprecated-declarations] 1016 | time.restart(); | ^ In file included from /usr/include/qt5/QtCore/QTime:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskCheckGeometry.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskCheckGeometry.cpp:71: /usr/include/qt5/QtCore/qdatetime.h:236:54: note: declared here 236 | QT_DEPRECATED_X("Use QElapsedTimer instead") int restart(); | ^~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIViewSymbol.cpp:39: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawViewSpreadsheet.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIViewSpreadsheet.cpp:27: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIViewAnnotation.cpp:47: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskAttacher.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskAttacher.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskAttacher.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskAttacher.cpp:53: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskAttacher.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskAttacher.cpp:53: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskAttacher.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskAttacher.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskAttacher.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskAttacher.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskAttacher.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskAttacher.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskAttacher.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskAttacher.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskAttacher.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskAttacher.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskAttacher.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskAttacher.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui/ui_TaskAttacher.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskAttacher.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/TaskAttacher.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/PropertyFemMeshItem.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/PropertyFemMeshItem.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/QObject:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/PropertyFemMeshItem.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/PropertyFemMeshItem.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:39, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/PropertyFemMeshItem.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/PropertyFemMeshItem.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qobjectdefs.h:48, from /usr/include/qt5/QtCore/qobject.h:46, from /usr/include/qt5/QtCore/QObject:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/propertyeditor/PropertyItem.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/PropertyFemMeshItem.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/PropertyFemMeshItem.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 93%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGIViewImage.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGIViewImage.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIViewImage.cpp [ 93%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGIViewClip.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGIViewClip.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIViewClip.cpp [ 93%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGIPrimPath.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGIPrimPath.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIPrimPath.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObserver.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ActiveAnalysisObserver.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ActiveAnalysisObserver.cpp:25: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 93%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/Workbench.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/Workbench.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Workbench.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ActiveAnalysisObserver.cpp:27: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qtreewidget.h:43, from /usr/include/qt5/QtWidgets/QTreeWidget:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ActiveAnalysisObserver.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ActiveAnalysisObserver.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Command.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 93%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemPostObject.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemPostObject.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostObject.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIViewClip.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIViewImage.cpp:38: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIPrimPath.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 93%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemPostPipeline.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemPostPipeline.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostPipeline.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Workbench.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/Workbench.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 93%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGICMark.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGICMark.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGICMark.cpp [ 93%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemPostFunction.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemPostFunction.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostFunction.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostObject.cpp:41: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 93%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGIDimLines.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGIDimLines.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIDimLines.cpp [ 93%] Linking CXX shared library ../../../../Mod/Part/PartGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Part/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/PartGui.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,PartGui.so -o ../../../../Mod/Part/PartGui.so CMakeFiles/PartGui.dir/qrc_Part.cpp.o CMakeFiles/PartGui.dir/AppPartGui.cpp.o CMakeFiles/PartGui.dir/AttacherTexts.cpp.o CMakeFiles/PartGui.dir/BoxSelection.cpp.o CMakeFiles/PartGui.dir/Command.cpp.o CMakeFiles/PartGui.dir/CommandSimple.cpp.o CMakeFiles/PartGui.dir/CommandParametric.cpp.o CMakeFiles/PartGui.dir/CrossSections.cpp.o CMakeFiles/PartGui.dir/Mirroring.cpp.o CMakeFiles/PartGui.dir/DlgBooleanOperation.cpp.o CMakeFiles/PartGui.dir/DlgExtrusion.cpp.o CMakeFiles/PartGui.dir/DlgFilletEdges.cpp.o CMakeFiles/PartGui.dir/DlgPartBoxImp.cpp.o CMakeFiles/PartGui.dir/DlgPartCylinderImp.cpp.o CMakeFiles/PartGui.dir/DlgPartImportIgesImp.cpp.o CMakeFiles/PartGui.dir/DlgPartImportStepImp.cpp.o CMakeFiles/PartGui.dir/DlgPrimitives.cpp.o CMakeFiles/PartGui.dir/DlgRevolution.cpp.o CMakeFiles/PartGui.dir/DlgSettings3DViewPartImp.cpp.o CMakeFiles/PartGui.dir/DlgSettingsGeneral.cpp.o CMakeFiles/PartGui.dir/DlgSettingsObjectColor.cpp.o CMakeFiles/PartGui.dir/PreCompiled.cpp.o CMakeFiles/PartGui.dir/PropertyEnumAttacherItem.cpp.o CMakeFiles/PartGui.dir/SoFCShapeObject.cpp.o CMakeFiles/PartGui.dir/SoBrepEdgeSet.cpp.o CMakeFiles/PartGui.dir/SoBrepFaceSet.cpp.o CMakeFiles/PartGui.dir/SoBrepPointSet.cpp.o CMakeFiles/PartGui.dir/ViewProvider.cpp.o CMakeFiles/PartGui.dir/ViewProviderExt.cpp.o CMakeFiles/PartGui.dir/ViewProviderReference.cpp.o CMakeFiles/PartGui.dir/ViewProviderBox.cpp.o CMakeFiles/PartGui.dir/ViewProviderCompound.cpp.o CMakeFiles/PartGui.dir/ViewProviderCircleParametric.cpp.o CMakeFiles/PartGui.dir/ViewProviderLineParametric.cpp.o CMakeFiles/PartGui.dir/ViewProviderPointParametric.cpp.o CMakeFiles/PartGui.dir/ViewProviderEllipseParametric.cpp.o CMakeFiles/PartGui.dir/ViewProviderHelixParametric.cpp.o CMakeFiles/PartGui.dir/ViewProviderPlaneParametric.cpp.o CMakeFiles/PartGui.dir/ViewProviderSphereParametric.cpp.o CMakeFiles/PartGui.dir/ViewProviderCylinderParametric.cpp.o CMakeFiles/PartGui.dir/ViewProviderConeParametric.cpp.o CMakeFiles/PartGui.dir/ViewProviderPrism.cpp.o CMakeFiles/PartGui.dir/ViewProviderRegularPolygon.cpp.o CMakeFiles/PartGui.dir/ViewProviderTorusParametric.cpp.o CMakeFiles/PartGui.dir/ViewProviderCurveNet.cpp.o CMakeFiles/PartGui.dir/ViewProviderSpline.cpp.o CMakeFiles/PartGui.dir/ViewProviderImport.cpp.o CMakeFiles/PartGui.dir/ViewProviderExtrusion.cpp.o CMakeFiles/PartGui.dir/ViewProvider2DObject.cpp.o CMakeFiles/PartGui.dir/ViewProviderMirror.cpp.o CMakeFiles/PartGui.dir/ViewProviderPython.cpp.o CMakeFiles/PartGui.dir/ViewProviderBoolean.cpp.o CMakeFiles/PartGui.dir/ViewProviderRuledSurface.cpp.o CMakeFiles/PartGui.dir/Workbench.cpp.o CMakeFiles/PartGui.dir/TaskFaceColors.cpp.o CMakeFiles/PartGui.dir/TaskShapeBuilder.cpp.o CMakeFiles/PartGui.dir/TaskLoft.cpp.o CMakeFiles/PartGui.dir/TaskOffset.cpp.o CMakeFiles/PartGui.dir/TaskSweep.cpp.o CMakeFiles/PartGui.dir/TaskThickness.cpp.o CMakeFiles/PartGui.dir/TaskDimension.cpp.o CMakeFiles/PartGui.dir/TaskCheckGeometry.cpp.o CMakeFiles/PartGui.dir/TaskAttacher.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Part/Part.so ../../../../lib/libFreeCADGui.so /usr/lib64/libQt5Concurrent.so.5.15.2 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so /usr/lib64/libfreetype.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 -lCoin /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5Widgets.so.5.15.2 -lpthread /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libQt5Core.so.5.15.2 [ 93%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGISectionLine.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGISectionLine.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGISectionLine.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostObject.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostObject.cpp:42: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 93%] Building CXX object src/Mod/Fem/Gui/CMakeFiles/FemGui.dir/ViewProviderFemPostFilter.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DFC_USE_VTK -DFemGui_EXPORTS -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/3rdParty/salomesmesh/inc -I//include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/jsoncpp -I/usr/include/freetype2 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/FemGui.dir/ViewProviderFemPostFilter.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostFilter.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostObject.cpp:48: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qicon.h:43, from /usr/include/qt5/QtGui/QIcon:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostObject.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 93%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGIDecoration.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGIDecoration.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIDecoration.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostPipeline.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostPipeline.cpp:25: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 93%] Built target PartGui /usr/bin/gmake -f src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/build.make src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 93%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/Resources/icons/SketcherWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Sketcher/Resources/icons/SketcherWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/Resources/icons/SketcherWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Sketcher/Resources/icons/SketcherWorkbench.svg [ 93%] Generating moc_PropertyConstraintListItem.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/moc_PropertyConstraintListItem.cpp_parameters [ 93%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGICenterLine.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGICenterLine.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGICenterLine.cpp [ 93%] Generating moc_SketchMirrorDialog.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/moc_SketchMirrorDialog.cpp_parameters [ 93%] Generating moc_SketchOrientationDialog.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/moc_SketchOrientationDialog.cpp_parameters [ 93%] Generating moc_SketchRectangularArrayDialog.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/moc_SketchRectangularArrayDialog.cpp_parameters [ 93%] Generating moc_SketcherRegularPolygonDialog.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/moc_SketcherRegularPolygonDialog.cpp_parameters [ 93%] Generating moc_SketcherSettings.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/moc_SketcherSettings.cpp_parameters [ 93%] Generating moc_TaskDlgEditSketch.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/moc_TaskDlgEditSketch.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostFunction.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostFunction.cpp:50: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 93%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/QGIHighlight.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/QGIHighlight.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIHighlight.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostFunction.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostFunction.cpp:51: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostFunction.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostFunction.cpp:47: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 93%] Generating moc_TaskSketcherConstrains.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/moc_TaskSketcherConstrains.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostFunction.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostFunction.cpp:50: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 93%] Generating moc_TaskSketcherCreateCommands.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/moc_TaskSketcherCreateCommands.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGISectionLine.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 93%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/TemplateTextField.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/TemplateTextField.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TemplateTextField.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostFilter.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostFilter.cpp:25: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 93%] Generating moc_TaskSketcherElements.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/moc_TaskSketcherElements.cpp_parameters [ 93%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/ViewProviderPage.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/ViewProviderPage.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderPage.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostFilter.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/TaskPostBoxes.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Fem/Gui/ViewProviderFemPostFilter.cpp:26: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 93%] Generating moc_TaskSketcherGeneral.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/moc_TaskSketcherGeneral.cpp_parameters [ 93%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/ViewProviderDrawingView.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/ViewProviderDrawingView.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderDrawingView.cpp [ 93%] Generating moc_TaskSketcherMessages.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/moc_TaskSketcherMessages.cpp_parameters [ 93%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/ViewProviderProjGroupItem.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/ViewProviderProjGroupItem.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderProjGroupItem.cpp [ 93%] Linking CXX shared library ../../../../Mod/Fem/FemGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Fem/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/FemGui.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -Wno-overloaded-virtual -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,FemGui.so -o ../../../../Mod/Fem/FemGui.so CMakeFiles/FemGui.dir/ViewProviderFemMeshPyImp.cpp.o CMakeFiles/FemGui.dir/DlgSettingsFemCcxImp.cpp.o CMakeFiles/FemGui.dir/DlgSettingsFemElmerImp.cpp.o CMakeFiles/FemGui.dir/DlgSettingsFemExportAbaqusImp.cpp.o CMakeFiles/FemGui.dir/DlgSettingsFemGeneralImp.cpp.o CMakeFiles/FemGui.dir/DlgSettingsFemGmshImp.cpp.o CMakeFiles/FemGui.dir/DlgSettingsFemInOutVtkImp.cpp.o CMakeFiles/FemGui.dir/DlgSettingsFemMaterialImp.cpp.o CMakeFiles/FemGui.dir/DlgSettingsFemZ88Imp.cpp.o CMakeFiles/FemGui.dir/TaskFemConstraint.cpp.o CMakeFiles/FemGui.dir/TaskFemConstraintBearing.cpp.o CMakeFiles/FemGui.dir/TaskFemConstraintFixed.cpp.o CMakeFiles/FemGui.dir/TaskFemConstraintForce.cpp.o CMakeFiles/FemGui.dir/TaskFemConstraintFluidBoundary.cpp.o CMakeFiles/FemGui.dir/TaskFemConstraintPressure.cpp.o CMakeFiles/FemGui.dir/TaskFemConstraintGear.cpp.o CMakeFiles/FemGui.dir/TaskFemConstraintPulley.cpp.o CMakeFiles/FemGui.dir/TaskFemConstraintDisplacement.cpp.o CMakeFiles/FemGui.dir/TaskFemConstraintTemperature.cpp.o CMakeFiles/FemGui.dir/TaskFemConstraintHeatflux.cpp.o CMakeFiles/FemGui.dir/TaskFemConstraintInitialTemperature.cpp.o CMakeFiles/FemGui.dir/TaskFemConstraintPlaneRotation.cpp.o CMakeFiles/FemGui.dir/TaskFemConstraintContact.cpp.o CMakeFiles/FemGui.dir/TaskFemConstraintTransform.cpp.o CMakeFiles/FemGui.dir/qrc_Fem.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemMesh.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemMeshShape.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemMeshShapeNetgen.cpp.o CMakeFiles/FemGui.dir/ViewProviderAnalysis.cpp.o CMakeFiles/FemGui.dir/ViewProviderSolver.cpp.o CMakeFiles/FemGui.dir/ViewProviderSetNodes.cpp.o CMakeFiles/FemGui.dir/ViewProviderSetElements.cpp.o CMakeFiles/FemGui.dir/ViewProviderSetFaces.cpp.o CMakeFiles/FemGui.dir/ViewProviderSetGeometry.cpp.o CMakeFiles/FemGui.dir/FemSelectionGate.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemConstraint.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemConstraintBearing.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemConstraintFixed.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemConstraintForce.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemConstraintFluidBoundary.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemConstraintPressure.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemConstraintGear.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemConstraintPulley.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemConstraintDisplacement.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemConstraintTemperature.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemConstraintHeatflux.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemConstraintInitialTemperature.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemConstraintPlaneRotation.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemConstraintContact.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemConstraintTransform.cpp.o CMakeFiles/FemGui.dir/ViewProviderResult.cpp.o CMakeFiles/FemGui.dir/TaskDlgCreateNodeSet.cpp.o CMakeFiles/FemGui.dir/TaskDlgMeshShapeNetgen.cpp.o CMakeFiles/FemGui.dir/TaskDlgAnalysis.cpp.o CMakeFiles/FemGui.dir/TaskObjectName.cpp.o CMakeFiles/FemGui.dir/TaskCreateNodeSet.cpp.o CMakeFiles/FemGui.dir/TaskDriver.cpp.o CMakeFiles/FemGui.dir/TaskAnalysisInfo.cpp.o CMakeFiles/FemGui.dir/TaskTetParameter.cpp.o CMakeFiles/FemGui.dir/TaskPostBoxes.cpp.o CMakeFiles/FemGui.dir/AppFemGui.cpp.o CMakeFiles/FemGui.dir/AppFemGuiPy.cpp.o CMakeFiles/FemGui.dir/AbaqusHighlighter.cpp.o CMakeFiles/FemGui.dir/ActiveAnalysisObserver.cpp.o CMakeFiles/FemGui.dir/Command.cpp.o CMakeFiles/FemGui.dir/PreCompiled.cpp.o CMakeFiles/FemGui.dir/PropertyFemMeshItem.cpp.o CMakeFiles/FemGui.dir/Workbench.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemPostObject.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemPostPipeline.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemPostFunction.cpp.o CMakeFiles/FemGui.dir/ViewProviderFemPostFilter.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Fem:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part: -lmpi_cxx -lmpi ../../../../Mod/Fem/Fem.so ../../../../lib/libFreeCADGui.so /usr/lib64/libdouble-conversion.so /usr/lib64/liblz4.so /usr/lib64/liblzma.so /usr/lib64/libz.so /usr/lib64/libexpat.so /usr/lib64/libjpeg.so /usr/lib64/libpng.so /usr/lib64/libtiff.so /usr/lib64/libnetcdf.so /usr/lib64/libhdf5.so /usr/lib64/libdl.so /usr/lib64/libm.so /usr/lib64/libhdf5_hl.so /usr/lib64/libjsoncpp.so /usr/lib64/libfreetype.so /usr/lib64/libGLEW.so ../../../../Mod/Part/Part.so ../../../../lib/libStdMeshers.so ../../../../lib/libMEFISTO2.so ../../../../lib/libSMESH.so ../../../../lib/libDriverSTL.so ../../../../lib/libDriverDAT.so ../../../../lib/libDriverUNV.so ../../../../lib/libDriver.so /usr/lib64/libmedC.so /usr/lib64/libmed.so ../../../../lib/libSMESHDS.so ../../../../lib/libSMDS.so /usr/lib64/libvtkFiltersVerdict-8.2.so.1 /usr/lib64/libvtkverdict-8.2.so.1 /usr/lib64/libdouble-conversion.so /usr/lib64/liblz4.so /usr/lib64/liblzma.so /usr/lib64/libexpat.so /usr/lib64/libvtkIOMPIParallel-8.2.so.1 /usr/lib64/libjpeg.so /usr/lib64/libpng.so /usr/lib64/libtiff.so /usr/lib64/libvtkIOParallel-8.2.so.1 /usr/lib64/libvtkIOGeometry-8.2.so.1 /usr/lib64/libvtkIOImage-8.2.so.1 /usr/lib64/libvtkDICOMParser-8.2.so.1 /usr/lib64/libvtkmetaio-8.2.so.1 /usr/lib64/libvtkIONetCDF-8.2.so.1 /usr/lib64/libhdf5.so /usr/lib64/libdl.so /usr/lib64/libm.so /usr/lib64/libhdf5_hl.so /usr/lib64/libvtkexodusII-8.2.so.1 /usr/lib64/libnetcdf.so /usr/lib64/libjsoncpp.so /usr/lib64/libvtkFiltersParallelDIY2-8.2.so.1 /usr/lib64/libvtkIOXML-8.2.so.1 /usr/lib64/libvtkIOXMLParser-8.2.so.1 /usr/lib64/libvtkFiltersParallel-8.2.so.1 /usr/lib64/libvtkFiltersModeling-8.2.so.1 /usr/lib64/libvtkParallelMPI-8.2.so.1 /usr/lib64/libvtkParallelCore-8.2.so.1 /usr/lib64/libvtkIOLegacy-8.2.so.1 /usr/lib64/libvtkIOCore-8.2.so.1 /usr/lib64/libvtkInteractionStyle-8.2.so.1 /usr/lib64/libvtkFiltersExtraction-8.2.so.1 /usr/lib64/libvtkFiltersStatistics-8.2.so.1 /usr/lib64/libvtkImagingFourier-8.2.so.1 /usr/lib64/libvtkImagingCore-8.2.so.1 /usr/lib64/libvtkRenderingFreeType-8.2.so.1 /usr/lib64/libvtkRenderingOpenGL2-8.2.so.1 /usr/lib64/libvtkRenderingCore-8.2.so.1 /usr/lib64/libvtkFiltersSources-8.2.so.1 /usr/lib64/libvtkFiltersGeneral-8.2.so.1 /usr/lib64/libvtkCommonComputationalGeometry-8.2.so.1 /usr/lib64/libvtkFiltersGeometry-8.2.so.1 /usr/lib64/libvtkFiltersCore-8.2.so.1 /usr/lib64/libvtkCommonExecutionModel-8.2.so.1 /usr/lib64/libvtkCommonColor-8.2.so.1 /usr/lib64/libvtkCommonDataModel-8.2.so.1 /usr/lib64/libvtkCommonMisc-8.2.so.1 /usr/lib64/libvtkCommonSystem-8.2.so.1 /usr/lib64/libvtkCommonTransforms-8.2.so.1 /usr/lib64/libvtkCommonMath-8.2.so.1 /usr/lib64/libvtkCommonCore-8.2.so.1 /usr/lib64/libvtksys-8.2.so.1 /usr/lib64/libSM.so /usr/lib64/libICE.so /usr/lib64/libXext.so /usr/lib64/libXt.so /usr/lib64/libGLEW.so /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKXDESTEP.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXDEIGES.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKXCAF.so.7.4.1 /usr/lib64/libTKVCAF.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKMeshVS.so.7.4.1 /usr/lib64/libTKV3d.so.7.4.1 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKService.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so -lfontconfig -lGL -lX11 -lXext -lXmu -lXi /usr/lib64/libfreetype.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 -lCoin /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5Widgets.so.5.15.2 -lpthread /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so [ 93%] Generating moc_TaskSketcherSolverAdvanced.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/moc_TaskSketcherSolverAdvanced.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderDrawingView.cpp:28: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderPage.cpp:33: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/QGIHighlight.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/App/DrawTemplate.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TemplateTextField.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TemplateTextField.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 93%] Generating moc_TaskSketcherValidation.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/moc_TaskSketcherValidation.cpp_parameters [ 93%] Generating qrc_Sketcher.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/rcc --name Sketcher --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/qrc_Sketcher.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/Resources/Sketcher.qrc [ 93%] Generating ui_InsertDatum.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_InsertDatum.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/InsertDatum.ui [ 93%] Generating ui_SketchMirrorDialog.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketchMirrorDialog.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketchMirrorDialog.ui [ 93%] Generating ui_SketchOrientationDialog.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketchOrientationDialog.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketchOrientationDialog.ui [ 93%] Generating ui_SketchRectangularArrayDialog.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketchRectangularArrayDialog.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketchRectangularArrayDialog.ui [ 93%] Generating ui_SketcherRegularPolygonDialog.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketcherRegularPolygonDialog.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherRegularPolygonDialog.ui [ 93%] Generating ui_SketcherSettings.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketcherSettings.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherSettings.ui [ 93%] Generating ui_SketcherSettingsColors.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketcherSettingsColors.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherSettingsColors.ui /usr/bin/gmake -f src/Mod/MeshPart/Gui/CMakeFiles/MeshPartGui.dir/build.make src/Mod/MeshPart/Gui/CMakeFiles/MeshPartGui.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 93%] Generating ui_Tessellation.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui/ui_Tessellation.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Tessellation.ui [ 93%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/InitGui.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/MeshPart/InitGui.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/InitGui.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/MeshPart/InitGui.py [ 93%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/MeshFlatteningCommand.py to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/MeshPart/MeshFlatteningCommand.py cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/MeshFlatteningCommand.py /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/MeshPart/MeshFlatteningCommand.py [ 93%] Generating moc_CurveOnMesh.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui/moc_CurveOnMesh.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderPage.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderPage.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 93%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/ViewProviderTemplate.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/ViewProviderTemplate.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderTemplate.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderProjGroupItem.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 93%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/ViewProviderDimension.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/ViewProviderDimension.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderDimension.cpp [ 93%] Generating ui_TaskSketcherConstrains.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherConstrains.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.ui [ 93%] Generating ui_TaskSketcherElements.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherElements.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherElements.ui [ 93%] Generating ui_TaskSketcherGeneral.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherGeneral.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherGeneral.ui [ 93%] Generating ui_TaskSketcherMessages.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherMessages.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherMessages.ui [ 93%] Generating ui_TaskSketcherSolverAdvanced.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherSolverAdvanced.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherSolverAdvanced.ui [ 93%] Generating ui_TaskSketcherValidation.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherValidation.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherValidation.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/depend.internal". In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderDrawingView.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderDrawingView.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 93%] Generating moc_TaskCurveOnMesh.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui/moc_TaskCurveOnMesh.cpp_parameters Scanning dependencies of target SketcherGui gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/build.make src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 93%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/qrc_Sketcher.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/qrc_Sketcher.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/qrc_Sketcher.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 93%] Built target FemGui [ 93%] Generating moc_Tessellation.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui/moc_Tessellation.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderProjGroupItem.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderProjGroupItem.cpp:35: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 94%] Generating qrc_MeshPart.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui && /usr/lib64/qt5/bin/rcc --name MeshPart --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui/qrc_MeshPart.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Resources/MeshPart.qrc [ 94%] Generating ui_TaskCurveOnMesh.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui/ui_TaskCurveOnMesh.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.ui /usr/bin/gmake -f src/Mod/Surface/Gui/CMakeFiles/SurfaceGui.dir/build.make src/Mod/Surface/Gui/CMakeFiles/SurfaceGui.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 94%] Generating ui_TaskGeomFillSurface.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui/ui_TaskGeomFillSurface.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskGeomFillSurface.ui [ 94%] Generating moc_TaskFilling.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui/moc_TaskFilling.cpp_parameters [ 94%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/ViewProviderViewPart.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/ViewProviderViewPart.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderViewPart.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderTemplate.cpp:37: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderDimension.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui/CMakeFiles/MeshPartGui.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui/CMakeFiles/MeshPartGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui/CMakeFiles/MeshPartGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui/CMakeFiles/MeshPartGui.dir/depend.internal". [ 94%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/AppSketcherGui.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/AppSketcherGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/AppSketcherGui.cpp Scanning dependencies of target MeshPartGui gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/MeshPart/Gui/CMakeFiles/MeshPartGui.dir/build.make src/Mod/MeshPart/Gui/CMakeFiles/MeshPartGui.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 94%] Building CXX object src/Mod/MeshPart/Gui/CMakeFiles/MeshPartGui.dir/qrc_MeshPart.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_MEFISTO -DHAVE_SMESH -DHAVE_TBB -DHAVE_VTK -DMeshPartGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshPartGui.dir/qrc_MeshPart.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui/qrc_MeshPart.cpp [ 94%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/ViewProviderProjGroup.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/ViewProviderProjGroup.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderProjGroup.cpp [ 94%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/ViewProviderViewSection.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/ViewProviderViewSection.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderViewSection.cpp [ 94%] Building CXX object src/Mod/MeshPart/Gui/CMakeFiles/MeshPartGui.dir/AppMeshPartGui.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_MEFISTO -DHAVE_SMESH -DHAVE_TBB -DHAVE_VTK -DMeshPartGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshPartGui.dir/AppMeshPartGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/AppMeshPartGui.cpp [ 94%] Generating moc_TaskFillingUnbound.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui/moc_TaskFillingUnbound.cpp_parameters In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderTemplate.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderTemplate.cpp:39: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 94%] Generating moc_TaskFillingVertex.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui/moc_TaskFillingVertex.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderViewPart.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 94%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/ViewProviderAnnotation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/ViewProviderAnnotation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderAnnotation.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/AppSketcherGui.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.h:115:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 115 | DlgPreferencesImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/AppSketcherGui.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/AppSketcherGui.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.h:54:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 54 | DlgCustomizeImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/AppSketcherGui.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 94%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/ViewProviderSymbol.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/ViewProviderSymbol.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderSymbol.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderProjGroup.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 94%] Generating moc_TaskGeomFillSurface.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui/moc_TaskGeomFillSurface.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/AppSketcherGui.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderProjGroup.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderProjGroup.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderViewSection.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderProjGroup.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskProjGroup.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderProjGroup.cpp:52: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 94%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/ViewProviderSpreadsheet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/ViewProviderSpreadsheet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderSpreadsheet.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/AppMeshPartGui.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 94%] Generating qrc_Surface.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui && /usr/lib64/qt5/bin/rcc --name Surface --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui/qrc_Surface.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Resources/Surface.qrc [ 94%] Generating ui_TaskFilling.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui/ui_TaskFilling.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFilling.ui [ 94%] Generating ui_TaskFillingUnbound.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui/ui_TaskFillingUnbound.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFillingUnbound.ui [ 94%] Generating ui_TaskFillingVertex.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui/ui_TaskFillingVertex.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFillingVertex.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui/CMakeFiles/SurfaceGui.dir/DependInfo.cmake --color= In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderAnnotation.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui/CMakeFiles/SurfaceGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui/CMakeFiles/SurfaceGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui/CMakeFiles/SurfaceGui.dir/depend.internal". In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/AppSketcherGui.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/AppSketcherGui.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ Scanning dependencies of target SurfaceGui gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Surface/Gui/CMakeFiles/SurfaceGui.dir/build.make src/Mod/Surface/Gui/CMakeFiles/SurfaceGui.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 94%] Building CXX object src/Mod/Surface/Gui/CMakeFiles/SurfaceGui.dir/qrc_Surface.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSurfaceGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SurfaceGui.dir/qrc_Surface.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui/qrc_Surface.cpp [ 94%] Building CXX object src/Mod/Surface/Gui/CMakeFiles/SurfaceGui.dir/TaskFilling.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSurfaceGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SurfaceGui.dir/TaskFilling.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFilling.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/PropertyConstraintListItem.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/AppSketcherGui.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/AppSketcherGui.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/PropertyConstraintListItem.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/AppSketcherGui.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/AppSketcherGui.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 94%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/ViewProviderViewClip.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/ViewProviderViewClip.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderViewClip.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderSymbol.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 94%] Building CXX object src/Mod/MeshPart/Gui/CMakeFiles/MeshPartGui.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_MEFISTO -DHAVE_SMESH -DHAVE_TBB -DHAVE_VTK -DMeshPartGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshPartGui.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp [ 94%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/ViewProviderHatch.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/ViewProviderHatch.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderHatch.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderSpreadsheet.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 94%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/Command.cpp [ 94%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/ViewProviderGeomHatch.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/ViewProviderGeomHatch.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderGeomHatch.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderViewClip.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 94%] Building CXX object src/Mod/TechDraw/Gui/CMakeFiles/TechDrawGui.dir/ViewProviderImage.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DMOD_TECHDRAW_HANDLE_FACES=1 -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DTechDrawGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/opencascade -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/TechDrawGui.dir/ViewProviderImage.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderImage.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFilling.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 94%] Building CXX object src/Mod/MeshPart/Gui/CMakeFiles/MeshPartGui.dir/CurveOnMesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_MEFISTO -DHAVE_SMESH -DHAVE_TBB -DHAVE_VTK -DMeshPartGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshPartGui.dir/CurveOnMesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/CurveOnMesh.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFilling.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFilling.cpp:24: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFilling.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFilling.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFilling.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFilling.cpp:44: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui/ui_TaskFilling.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFilling.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFilling.cpp:24: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui/ui_TaskFilling.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFilling.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFilling.cpp:24: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderHatch.cpp:38: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Mesh/App/MeshFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderGeomHatch.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 95%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/CommandCreateGeo.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/CommandCreateGeo.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectGroup.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/Command.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Tessellation.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Tessellation.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Command.cpp:43: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderImage.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderGeomHatch.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderGeomHatch.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/Command.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/Command.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/Command.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgRunExternal.h:44:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 44 | DlgRunExternal(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/Command.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/Command.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.h:42:116: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 42 | DlgEditFileIncludePropertyExternal( App::PropertyFileIncluded& Prop, QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/Command.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderGeomHatch.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderGeomHatch.cpp:57: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 95%] Building CXX object src/Mod/MeshPart/Gui/CMakeFiles/MeshPartGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_MEFISTO -DHAVE_SMESH -DHAVE_TBB -DHAVE_VTK -DMeshPartGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshPartGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/PreCompiled.cpp [ 95%] Building CXX object src/Mod/MeshPart/Gui/CMakeFiles/MeshPartGui.dir/TaskCurveOnMesh.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_MEFISTO -DHAVE_SMESH -DHAVE_TBB -DHAVE_VTK -DMeshPartGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshPartGui.dir/TaskCurveOnMesh.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_TaskGeomHatch.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderGeomHatch.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderGeomHatch.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_TaskGeomHatch.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderGeomHatch.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderGeomHatch.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_TaskGeomHatch.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderGeomHatch.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderGeomHatch.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_TaskGeomHatch.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderGeomHatch.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderGeomHatch.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui/ui_TaskGeomHatch.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/TaskGeomHatch.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderGeomHatch.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/TechDraw/Gui/ViewProviderGeomHatch.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 95%] Building CXX object src/Mod/Surface/Gui/CMakeFiles/SurfaceGui.dir/TaskFillingUnbound.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSurfaceGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SurfaceGui.dir/TaskFillingUnbound.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFillingUnbound.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/CurveOnMesh.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/CurveOnMesh.cpp:45: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 95%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/CommandConstraints.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/CommandConstraints.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandConstraints.cpp [ 95%] Building CXX object src/Mod/Surface/Gui/CMakeFiles/SurfaceGui.dir/TaskFillingVertex.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSurfaceGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SurfaceGui.dir/TaskFillingVertex.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFillingVertex.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/CurveOnMesh.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/CurveOnMesh.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 95%] Linking CXX shared library ../../../../Mod/TechDraw/TechDrawGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/TechDraw/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/TechDrawGui.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,TechDrawGui.so -o ../../../../Mod/TechDraw/TechDrawGui.so CMakeFiles/TechDrawGui.dir/qrc_TechDraw.cpp.o CMakeFiles/TechDrawGui.dir/AppTechDrawGui.cpp.o CMakeFiles/TechDrawGui.dir/AppTechDrawGuiPy.cpp.o CMakeFiles/TechDrawGui.dir/Command.cpp.o CMakeFiles/TechDrawGui.dir/CommandCreateDims.cpp.o CMakeFiles/TechDrawGui.dir/CommandDecorate.cpp.o CMakeFiles/TechDrawGui.dir/PreCompiled.cpp.o CMakeFiles/TechDrawGui.dir/Workbench.cpp.o CMakeFiles/TechDrawGui.dir/TaskProjGroup.cpp.o CMakeFiles/TechDrawGui.dir/DlgPrefsTechDrawImp.cpp.o CMakeFiles/TechDrawGui.dir/DlgPrefsTechDraw2Imp.cpp.o CMakeFiles/TechDrawGui.dir/TaskLinkDim.cpp.o CMakeFiles/TechDrawGui.dir/DlgTemplateField.cpp.o CMakeFiles/TechDrawGui.dir/TaskSectionView.cpp.o CMakeFiles/TechDrawGui.dir/TaskGeomHatch.cpp.o CMakeFiles/TechDrawGui.dir/DrawGuiUtil.cpp.o CMakeFiles/TechDrawGui.dir/Rez.cpp.o CMakeFiles/TechDrawGui.dir/MDIViewPage.cpp.o CMakeFiles/TechDrawGui.dir/QGVPage.cpp.o CMakeFiles/TechDrawGui.dir/QGCustomText.cpp.o CMakeFiles/TechDrawGui.dir/QGICaption.cpp.o CMakeFiles/TechDrawGui.dir/QGCustomRect.cpp.o CMakeFiles/TechDrawGui.dir/QGCustomSvg.cpp.o CMakeFiles/TechDrawGui.dir/QGCustomClip.cpp.o CMakeFiles/TechDrawGui.dir/QGCustomLabel.cpp.o CMakeFiles/TechDrawGui.dir/QGCustomBorder.cpp.o CMakeFiles/TechDrawGui.dir/QGCustomImage.cpp.o CMakeFiles/TechDrawGui.dir/QGDisplayArea.cpp.o CMakeFiles/TechDrawGui.dir/QGIView.cpp.o CMakeFiles/TechDrawGui.dir/QGIArrow.cpp.o CMakeFiles/TechDrawGui.dir/QGIEdge.cpp.o CMakeFiles/TechDrawGui.dir/QGIFace.cpp.o CMakeFiles/TechDrawGui.dir/QGISVGTemplate.cpp.o CMakeFiles/TechDrawGui.dir/QGIVertex.cpp.o CMakeFiles/TechDrawGui.dir/QGIMatting.cpp.o CMakeFiles/TechDrawGui.dir/QGIDrawingTemplate.cpp.o CMakeFiles/TechDrawGui.dir/QGITemplate.cpp.o CMakeFiles/TechDrawGui.dir/QGIViewCollection.cpp.o CMakeFiles/TechDrawGui.dir/QGIViewDimension.cpp.o CMakeFiles/TechDrawGui.dir/QGIProjGroup.cpp.o CMakeFiles/TechDrawGui.dir/QGIViewPart.cpp.o CMakeFiles/TechDrawGui.dir/QGIViewSection.cpp.o CMakeFiles/TechDrawGui.dir/QGIViewAnnotation.cpp.o CMakeFiles/TechDrawGui.dir/QGIViewSymbol.cpp.o CMakeFiles/TechDrawGui.dir/QGIViewSpreadsheet.cpp.o CMakeFiles/TechDrawGui.dir/QGIViewImage.cpp.o CMakeFiles/TechDrawGui.dir/QGIViewClip.cpp.o CMakeFiles/TechDrawGui.dir/QGIPrimPath.cpp.o CMakeFiles/TechDrawGui.dir/QGICMark.cpp.o CMakeFiles/TechDrawGui.dir/QGIDimLines.cpp.o CMakeFiles/TechDrawGui.dir/QGISectionLine.cpp.o CMakeFiles/TechDrawGui.dir/QGIDecoration.cpp.o CMakeFiles/TechDrawGui.dir/QGICenterLine.cpp.o CMakeFiles/TechDrawGui.dir/QGIHighlight.cpp.o CMakeFiles/TechDrawGui.dir/TemplateTextField.cpp.o CMakeFiles/TechDrawGui.dir/ViewProviderPage.cpp.o CMakeFiles/TechDrawGui.dir/ViewProviderDrawingView.cpp.o CMakeFiles/TechDrawGui.dir/ViewProviderProjGroupItem.cpp.o CMakeFiles/TechDrawGui.dir/ViewProviderTemplate.cpp.o CMakeFiles/TechDrawGui.dir/ViewProviderDimension.cpp.o CMakeFiles/TechDrawGui.dir/ViewProviderViewPart.cpp.o CMakeFiles/TechDrawGui.dir/ViewProviderProjGroup.cpp.o CMakeFiles/TechDrawGui.dir/ViewProviderViewSection.cpp.o CMakeFiles/TechDrawGui.dir/ViewProviderAnnotation.cpp.o CMakeFiles/TechDrawGui.dir/ViewProviderSymbol.cpp.o CMakeFiles/TechDrawGui.dir/ViewProviderSpreadsheet.cpp.o CMakeFiles/TechDrawGui.dir/ViewProviderViewClip.cpp.o CMakeFiles/TechDrawGui.dir/ViewProviderHatch.cpp.o CMakeFiles/TechDrawGui.dir/ViewProviderGeomHatch.cpp.o CMakeFiles/TechDrawGui.dir/ViewProviderImage.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/TechDraw:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Measure:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Drawing:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Spreadsheet:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part: -lmpi_cxx -lmpi ../../../../Mod/TechDraw/TechDraw.so ../../../../lib/libFreeCADGui.so ../../../../Mod/Measure/Measure.so ../../../../Mod/Drawing/Drawing.so ../../../../Mod/Spreadsheet/Spreadsheet.so ../../../../Mod/Import/Import.so ../../../../Mod/Part/Part.so /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKXDESTEP.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXDEIGES.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKXCAF.so.7.4.1 /usr/lib64/libTKVCAF.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKMeshVS.so.7.4.1 /usr/lib64/libTKV3d.so.7.4.1 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKService.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so -lfontconfig -lGL -lX11 -lXext -lXmu -lXi /usr/lib64/libfreetype.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 -lCoin /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5Widgets.so.5.15.2 -lpthread /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp:40: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/CurveOnMesh.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/CurveOnMesh.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/CurveOnMesh.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/CurveOnMesh.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/CurveOnMesh.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/CurveOnMesh.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/CurveOnMesh.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/CurveOnMesh.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/CurveOnMesh.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/CurveOnMesh.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/CurveOnMesh.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/CurveOnMesh.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/CurveOnMesh.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/CurveOnMesh.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgRunExternal.h:44:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 44 | DlgRunExternal(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp:49: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.h:42:116: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 42 | DlgEditFileIncludePropertyExternal( App::PropertyFileIncluded& Prop, QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.cpp:26: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 95%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/CommandSketcherTools.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/CommandSketcherTools.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherTools.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.cpp:26: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.cpp:26: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:43, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFillingUnbound.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp:60: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:43, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp:61: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandCreateGeo.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:43, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:43, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:43, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 95%] Building CXX object src/Mod/MeshPart/Gui/CMakeFiles/MeshPartGui.dir/Tessellation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_MEFISTO -DHAVE_SMESH -DHAVE_TBB -DHAVE_VTK -DMeshPartGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshPartGui.dir/Tessellation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Tessellation.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:43, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:43, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:43, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/TaskCurveOnMesh.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFillingUnbound.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFillingUnbound.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 95%] Built target TechDrawGui /usr/bin/gmake -f src/Mod/Import/Gui/CMakeFiles/ImportGui.dir/build.make src/Mod/Import/Gui/CMakeFiles/ImportGui.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/Gui/CMakeFiles/ImportGui.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/Gui/CMakeFiles/ImportGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/Gui/CMakeFiles/ImportGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/Gui/CMakeFiles/ImportGui.dir/depend.internal". In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFillingUnbound.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFillingUnbound.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFillingUnbound.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFillingUnbound.cpp:45: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ Scanning dependencies of target ImportGui gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Import/Gui/CMakeFiles/ImportGui.dir/build.make src/Mod/Import/Gui/CMakeFiles/ImportGui.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 95%] Building CXX object src/Mod/Import/Gui/CMakeFiles/ImportGui.dir/AppImportGui.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DImportGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ImportGui.dir/AppImportGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/AppImportGui.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandConstraints.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandConstraints.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandConstraints.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandConstraints.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgRunExternal.h:44:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 44 | DlgRunExternal(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandConstraints.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandConstraints.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.h:42:116: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 42 | DlgEditFileIncludePropertyExternal( App::PropertyFileIncluded& Prop, QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandConstraints.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFillingVertex.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 95%] Building CXX object src/Mod/Import/Gui/CMakeFiles/ImportGui.dir/AppImportGuiPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DImportGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ImportGui.dir/AppImportGuiPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/AppImportGuiPy.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFillingVertex.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFillingVertex.cpp:24: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFillingVertex.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFillingVertex.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFillingVertex.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskFillingVertex.cpp:44: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_InsertDatum.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandConstraints.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandConstraints.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_InsertDatum.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandConstraints.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandConstraints.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 95%] Building CXX object src/Mod/Import/Gui/CMakeFiles/ImportGui.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DImportGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ImportGui.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/Command.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_InsertDatum.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandConstraints.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandConstraints.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_InsertDatum.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandConstraints.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandConstraints.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_InsertDatum.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandConstraints.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandConstraints.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherTools.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 95%] Building CXX object src/Mod/Surface/Gui/CMakeFiles/SurfaceGui.dir/TaskGeomFillSurface.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSurfaceGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SurfaceGui.dir/TaskGeomFillSurface.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskGeomFillSurface.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Tessellation.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Tessellation.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherTools.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherTools.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/AppImportGui.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherTools.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgRunExternal.h:44:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 44 | DlgRunExternal(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherTools.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherTools.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.h:42:116: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 42 | DlgEditFileIncludePropertyExternal( App::PropertyFileIncluded& Prop, QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherTools.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Tessellation.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Tessellation.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Tessellation.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Tessellation.cpp:31: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Tessellation.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Tessellation.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/AppImportGuiPy.cpp:80: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/Command.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/Command.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/Command.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/Command.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/Command.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/Command.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/Command.cpp: In member function 'virtual void FCCmdImportReadBREP::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/Command.cpp:60:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 60 | QString fn = Gui::FileDialog::getOpenFileName(Gui::getMainWindow(), QString(), QString(), QLatin1String("BREP (*.brep *.rle)")); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/Command.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/Command.cpp: In member function 'virtual void ImportStep::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/Command.cpp:96:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 96 | QString fn = Gui::FileDialog::getOpenFileName(Gui::getMainWindow(), QString(), QString(), QLatin1String("STEP (*.stp *.step)")); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/Command.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/Command.cpp: In member function 'virtual void ImportIges::activated(int)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/Command.cpp:135:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 135 | QString fn = Gui::FileDialog::getOpenFileName(Gui::getMainWindow(), QString(), QString(), QLatin1String("IGES (*.igs *.iges)")); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/Command.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 95%] Building CXX object src/Mod/Import/Gui/CMakeFiles/ImportGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DImportGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ImportGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/PreCompiled.cpp [ 95%] Building CXX object src/Mod/Import/Gui/CMakeFiles/ImportGui.dir/Workbench.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DImportGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/ImportGui.dir/Workbench.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/Workbench.cpp [ 95%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/CommandSketcherBSpline.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/CommandSketcherBSpline.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherBSpline.cpp [ 95%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/CommandSketcherVirtualSpace.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/CommandSketcherVirtualSpace.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherVirtualSpace.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/AppImportGuiPy.cpp:122: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/AppImportGuiPy.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 95%] Building CXX object src/Mod/MeshPart/Gui/CMakeFiles/MeshPartGui.dir/Workbench.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_MEFISTO -DHAVE_SMESH -DHAVE_TBB -DHAVE_VTK -DMeshPartGui_EXPORTS -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtConcurrent -isystem /usr/include/vtk-8.2 -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/MeshPartGui.dir/Workbench.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Workbench.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskGeomFillSurface.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskGeomFillSurface.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskGeomFillSurface.cpp:25: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskGeomFillSurface.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskGeomFillSurface.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskGeomFillSurface.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskGeomFillSurface.cpp:42: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/Workbench.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Import/Gui/Workbench.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 95%] Building CXX object src/Mod/Surface/Gui/CMakeFiles/SurfaceGui.dir/AppSurfaceGui.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSurfaceGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SurfaceGui.dir/AppSurfaceGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/AppSurfaceGui.cpp [ 95%] Linking CXX shared library ../../../../Mod/Import/ImportGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Import/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/ImportGui.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,ImportGui.so -o ../../../../Mod/Import/ImportGui.so CMakeFiles/ImportGui.dir/AppImportGui.cpp.o CMakeFiles/ImportGui.dir/AppImportGuiPy.cpp.o CMakeFiles/ImportGui.dir/Command.cpp.o CMakeFiles/ImportGui.dir/PreCompiled.cpp.o CMakeFiles/ImportGui.dir/Workbench.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Import:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Part/PartGui.so ../../../../Mod/Import/Import.so /usr/lib64/libTKXDESTEP.so.7.4.1 /usr/lib64/libTKXDEIGES.so.7.4.1 /usr/lib64/libTKMeshVS.so.7.4.1 ../../../../lib/libFreeCADGui.so -lCoin /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5Widgets.so.5.15.2 /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libQt5Concurrent.so.5.15.2 /usr/lib64/libTKXCAF.so.7.4.1 /usr/lib64/libTKVCAF.so.7.4.1 /usr/lib64/libTKV3d.so.7.4.1 /usr/lib64/libTKService.so.7.4.1 -lfontconfig -lGL -lX11 -lXext -lXmu -lXi ../../../../Mod/Part/Part.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so /usr/lib64/libfreetype.so [ 95%] Building CXX object src/Mod/Surface/Gui/CMakeFiles/SurfaceGui.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSurfaceGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SurfaceGui.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Workbench.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/MeshPart/Gui/Workbench.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherVirtualSpace.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 95%] Building CXX object src/Mod/Surface/Gui/CMakeFiles/SurfaceGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSurfaceGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SurfaceGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/PreCompiled.cpp [ 95%] Building CXX object src/Mod/Surface/Gui/CMakeFiles/SurfaceGui.dir/Workbench.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSurfaceGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SurfaceGui.dir/Workbench.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Workbench.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherBSpline.cpp:36: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherVirtualSpace.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherVirtualSpace.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherVirtualSpace.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgRunExternal.h:44:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 44 | DlgRunExternal(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherVirtualSpace.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherVirtualSpace.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.h:42:116: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 42 | DlgEditFileIncludePropertyExternal( App::PropertyFileIncluded& Prop, QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherVirtualSpace.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherBSpline.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherBSpline.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherBSpline.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgRunExternal.h:44:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 44 | DlgRunExternal(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherBSpline.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherBSpline.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.h:42:116: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 42 | DlgEditFileIncludePropertyExternal( App::PropertyFileIncluded& Prop, QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandSketcherBSpline.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 95%] Linking CXX shared library ../../../../Mod/MeshPart/MeshPartGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/MeshPart/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/MeshPartGui.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,MeshPartGui.so -o ../../../../Mod/MeshPart/MeshPartGui.so CMakeFiles/MeshPartGui.dir/qrc_MeshPart.cpp.o CMakeFiles/MeshPartGui.dir/AppMeshPartGui.cpp.o CMakeFiles/MeshPartGui.dir/Command.cpp.o CMakeFiles/MeshPartGui.dir/CurveOnMesh.cpp.o CMakeFiles/MeshPartGui.dir/PreCompiled.cpp.o CMakeFiles/MeshPartGui.dir/TaskCurveOnMesh.cpp.o CMakeFiles/MeshPartGui.dir/Tessellation.cpp.o CMakeFiles/MeshPartGui.dir/Workbench.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/MeshPart:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Mesh:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/MeshPart/MeshPart.so ../../../../Mod/Part/PartGui.so ../../../../Mod/Mesh/MeshGui.so ../../../../lib/libFreeCADGui.so ../../../../lib/libStdMeshers.so ../../../../lib/libMEFISTO2.so ../../../../lib/libSMESH.so ../../../../lib/libDriverSTL.so ../../../../lib/libDriverDAT.so ../../../../lib/libDriverUNV.so ../../../../lib/libSMESHDS.so ../../../../lib/libDriver.so /usr/lib64/libmedC.so /usr/lib64/libmed.so ../../../../lib/libSMDS.so /usr/lib64/libTKXDESTEP.so.7.4.1 /usr/lib64/libTKXDEIGES.so.7.4.1 /usr/lib64/libTKXCAF.so.7.4.1 /usr/lib64/libTKVCAF.so.7.4.1 /usr/lib64/libTKMeshVS.so.7.4.1 /usr/lib64/libTKV3d.so.7.4.1 /usr/lib64/libTKService.so.7.4.1 -lfontconfig -lGL -lX11 -lXext -lXmu -lXi /usr/lib64/libvtkFiltersVerdict-8.2.so.1 /usr/lib64/libvtkverdict-8.2.so.1 /usr/lib64/libdouble-conversion.so /usr/lib64/liblz4.so /usr/lib64/liblzma.so /usr/lib64/libexpat.so /usr/lib64/libvtkIOMPIParallel-8.2.so.1 /usr/lib64/libjpeg.so /usr/lib64/libpng.so /usr/lib64/libtiff.so /usr/lib64/libvtkIOParallel-8.2.so.1 /usr/lib64/libvtkIOGeometry-8.2.so.1 /usr/lib64/libvtkIOImage-8.2.so.1 /usr/lib64/libvtkDICOMParser-8.2.so.1 /usr/lib64/libvtkmetaio-8.2.so.1 /usr/lib64/libvtkIONetCDF-8.2.so.1 /usr/lib64/libhdf5.so /usr/lib64/libdl.so /usr/lib64/libm.so /usr/lib64/libhdf5_hl.so /usr/lib64/libvtkexodusII-8.2.so.1 /usr/lib64/libnetcdf.so /usr/lib64/libjsoncpp.so /usr/lib64/libvtkFiltersParallelDIY2-8.2.so.1 /usr/lib64/libvtkIOXML-8.2.so.1 /usr/lib64/libvtkIOXMLParser-8.2.so.1 /usr/lib64/libvtkFiltersParallel-8.2.so.1 /usr/lib64/libvtkFiltersModeling-8.2.so.1 /usr/lib64/libvtkParallelMPI-8.2.so.1 /usr/lib64/libvtkParallelCore-8.2.so.1 /usr/lib64/libvtkIOLegacy-8.2.so.1 /usr/lib64/libvtkIOCore-8.2.so.1 /usr/lib64/libvtkInteractionStyle-8.2.so.1 /usr/lib64/libvtkFiltersExtraction-8.2.so.1 /usr/lib64/libvtkFiltersStatistics-8.2.so.1 /usr/lib64/libvtkImagingFourier-8.2.so.1 /usr/lib64/libvtkImagingCore-8.2.so.1 /usr/lib64/libvtkRenderingFreeType-8.2.so.1 /usr/lib64/libvtkRenderingOpenGL2-8.2.so.1 /usr/lib64/libvtkRenderingCore-8.2.so.1 /usr/lib64/libvtkFiltersSources-8.2.so.1 /usr/lib64/libvtkFiltersGeneral-8.2.so.1 /usr/lib64/libvtkCommonComputationalGeometry-8.2.so.1 /usr/lib64/libvtkFiltersGeometry-8.2.so.1 /usr/lib64/libvtkFiltersCore-8.2.so.1 /usr/lib64/libvtkCommonExecutionModel-8.2.so.1 /usr/lib64/libvtkCommonColor-8.2.so.1 /usr/lib64/libvtkCommonDataModel-8.2.so.1 /usr/lib64/libvtkCommonMisc-8.2.so.1 /usr/lib64/libvtkCommonSystem-8.2.so.1 /usr/lib64/libvtkCommonTransforms-8.2.so.1 /usr/lib64/libvtkCommonMath-8.2.so.1 /usr/lib64/libvtkCommonCore-8.2.so.1 /usr/lib64/libvtksys-8.2.so.1 /usr/lib64/libSM.so /usr/lib64/libICE.so /usr/lib64/libXext.so /usr/lib64/libXt.so /usr/lib64/libGLEW.so ../../../../Mod/Part/Part.so /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so /usr/lib64/libfreetype.so -lCoin /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5Widgets.so.5.15.2 /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so ../../../../Mod/Mesh/Mesh.so /usr/lib64/libQt5Concurrent.so.5.15.2 ../../../../lib/libFreeCADApp.so /usr/lib64/libQt5Xml.so.5.15.2 ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libQt5Core.so.5.15.2 /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread -lpthread /usr/lib64/libGLU.so [ 95%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/CommandAlterGeometry.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/CommandAlterGeometry.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandAlterGeometry.cpp gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 95%] Built target ImportGui /usr/bin/gmake -f src/Mod/Path/Gui/CMakeFiles/PathGui.dir/build.make src/Mod/Path/Gui/CMakeFiles/PathGui.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 95%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/Resources/icons/PathWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Path/Resources/icons/PathWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/Resources/icons/PathWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/Path/Resources/icons/PathWorkbench.svg [ 96%] Generating moc_DlgProcessorChooser.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/moc_DlgProcessorChooser.cpp_parameters [ 96%] Generating moc_DlgSettingsPathColor.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/moc_DlgSettingsPathColor.cpp_parameters [ 96%] Generating moc_TaskDlgPathCompound.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/moc_TaskDlgPathCompound.cpp_parameters In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/AppSurfaceGui.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskGeomFillSurface.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/AppSurfaceGui.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/TaskGeomFillSurface.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/AppSurfaceGui.cpp:37: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 96%] Built target MeshPartGui [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/PreCompiled.cpp [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/SoZoomTranslation.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/SoZoomTranslation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoZoomTranslation.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Workbench.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Workbench.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/SoDatumLabel.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/SoDatumLabel.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoDatumLabel.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:47: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/PropertyConstraintListItem.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/PropertyConstraintListItem.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/PropertyConstraintListItem.cpp [ 96%] Generating qrc_Path.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui && /usr/lib64/qt5/bin/rcc --name Path --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/qrc_Path.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/Resources/Path.qrc [ 96%] Generating ui_DlgProcessorChooser.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/ui_DlgProcessorChooser.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgProcessorChooser.ui [ 96%] Generating ui_DlgSettingsPathColor.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/ui_DlgSettingsPathColor.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.ui [ 96%] Generating ui_TaskDlgPathCompound.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/ui_TaskDlgPathCompound.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/TaskDlgPathCompound.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/CMakeFiles/PathGui.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/CMakeFiles/PathGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/CMakeFiles/PathGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/CMakeFiles/PathGui.dir/depend.internal". In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:53: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:53: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:53: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ Scanning dependencies of target PathGui gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/Path/Gui/CMakeFiles/PathGui.dir/build.make src/Mod/Path/Gui/CMakeFiles/PathGui.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 96%] Building CXX object src/Mod/Path/Gui/CMakeFiles/PathGui.dir/qrc_Path.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPathGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PathGui.dir/qrc_Path.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/qrc_Path.cpp [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/TaskSketcherConstrains.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/TaskSketcherConstrains.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:57: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/TaskSketcherElements.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/TaskSketcherElements.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherElements.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoDatumLabel.cpp: In member function 'void SketcherGui::SoDatumLabel::drawImage()': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoDatumLabel.cpp:118:25: warning: 'int QFontMetrics::width(const QString&, int) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 118 | int w = fm.width(str); | ^ In file included from /usr/include/qt5/QtGui/QFontMetrics:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoDatumLabel.cpp:38: /usr/include/qt5/QtGui/qfontmetrics.h:106:9: note: declared here 106 | int width(const QString &, int len = -1) const; | ^~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:58: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Surface/Gui/Command.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandAlterGeometry.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandAlterGeometry.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandAlterGeometry.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandAlterGeometry.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgRunExternal.h:44:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 44 | DlgRunExternal(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandAlterGeometry.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandAlterGeometry.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.h:42:116: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 42 | DlgEditFileIncludePropertyExternal( App::PropertyFileIncluded& Prop, QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/CommandAlterGeometry.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 96%] Building CXX object src/Mod/Path/Gui/CMakeFiles/PathGui.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPathGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PathGui.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/Command.cpp [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/TaskSketcherCreateCommands.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/TaskSketcherCreateCommands.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherCreateCommands.cpp [ 96%] Linking CXX shared library ../../../../Mod/Surface/SurfaceGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Surface/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/SurfaceGui.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,SurfaceGui.so -o ../../../../Mod/Surface/SurfaceGui.so CMakeFiles/SurfaceGui.dir/qrc_Surface.cpp.o CMakeFiles/SurfaceGui.dir/TaskFilling.cpp.o CMakeFiles/SurfaceGui.dir/TaskFillingUnbound.cpp.o CMakeFiles/SurfaceGui.dir/TaskFillingVertex.cpp.o CMakeFiles/SurfaceGui.dir/TaskGeomFillSurface.cpp.o CMakeFiles/SurfaceGui.dir/AppSurfaceGui.cpp.o CMakeFiles/SurfaceGui.dir/Command.cpp.o CMakeFiles/SurfaceGui.dir/PreCompiled.cpp.o CMakeFiles/SurfaceGui.dir/Workbench.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Surface:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Surface/Surface.so ../../../../Mod/Part/PartGui.so ../../../../lib/libFreeCADGui.so -lCoin /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5Widgets.so.5.15.2 /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so ../../../../Mod/Part/Part.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so /usr/lib64/libfreetype.so /usr/lib64/libQt5Concurrent.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoZoomTranslation.cpp:41: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherElements.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherElements.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherElements.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherElements.cpp:34: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.cpp:38: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoZoomTranslation.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoZoomTranslation.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/PropertyConstraintListItem.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/PropertyConstraintListItem.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qalgorithms.h:43, from /usr/include/qt5/QtCore/qdebug.h:44, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/PropertyConstraintListItem.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/PropertyConstraintListItem.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/PropertyConstraintListItem.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qalgorithms.h:43, from /usr/include/qt5/QtCore/qdebug.h:44, from /usr/include/qt5/QtCore/QDebug:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/PropertyConstraintListItem.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoZoomTranslation.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoZoomTranslation.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoZoomTranslation.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoZoomTranslation.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoZoomTranslation.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoZoomTranslation.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoZoomTranslation.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoZoomTranslation.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoZoomTranslation.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoZoomTranslation.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoZoomTranslation.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoZoomTranslation.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoZoomTranslation.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SoZoomTranslation.cpp:41: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 96%] Built target SurfaceGui [ 96%] Building CXX object src/Mod/Path/Gui/CMakeFiles/PathGui.dir/AppPathGui.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPathGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PathGui.dir/AppPathGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/AppPathGui.cpp [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/TaskSketcherGeneral.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/TaskSketcherGeneral.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherGeneral.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherCreateCommands.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherCreateCommands.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherCreateCommands.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherCreateCommands.cpp:30: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherElements.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherElements.cpp:34: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.cpp:38: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/TaskSketcherMessages.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/TaskSketcherMessages.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherMessages.cpp [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/TaskSketcherSolverAdvanced.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/TaskSketcherSolverAdvanced.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherSolverAdvanced.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherConstrains.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherConstrains.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherConstrains.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherConstrains.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherConstrains.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherCreateCommands.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherCreateCommands.cpp:30: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherElements.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherElements.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/Command.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QContextMenuEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherCreateCommands.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qnamespace.h:43, from /usr/include/qt5/QtCore/qcoreevent.h:43, from /usr/include/qt5/QtCore/QEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherCreateCommands.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/Command.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/Command.cpp:32: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherElements.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherElements.cpp:34: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/AppPathGui.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgPreferencesImp.h:115:65: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 115 | DlgPreferencesImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/AppPathGui.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/WidgetFactory.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/AppPathGui.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgCustomizeImp.h:54:63: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 54 | DlgCustomizeImp(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/AppPathGui.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherGeneral.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherGeneral.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherGeneral.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherGeneral.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherGeneral.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherGeneral.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherGeneral.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherGeneral.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.cpp:38: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.cpp: In member function 'QPixmap ExpressionDelegate::getIcon(const char*, const QSize&) const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.cpp:361:41: warning: 'static bool QPixmapCache::find(const QString&, QPixmap&)' is deprecated: Use bool find(const QString &, QPixmap *) instead [-Wdeprecated-declarations] 361 | if (QPixmapCache::find(key, icon)) | ^ In file included from /usr/include/qt5/QtGui/QPixmapCache:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.cpp:35: /usr/include/qt5/QtGui/qpixmapcache.h:81:17: note: declared here 81 | static bool find(const QString &key, QPixmap &pixmap); | ^~~~ [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/TaskSketcherValidation.cpp.o In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherMessages.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherMessages.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherMessages.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherMessages.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherMessages.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherMessages.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherMessages.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherMessages.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/TaskSketcherValidation.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherValidation.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherGeneral.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherGeneral.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherGeneral.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherGeneral.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherGeneral.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherGeneral.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherGeneral.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherGeneral.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherGeneral.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherGeneral.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherGeneral.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherGeneral.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherGeneral.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherGeneral.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherGeneral.h:16, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherGeneral.cpp:29: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherSolverAdvanced.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherSolverAdvanced.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherSolverAdvanced.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherSolverAdvanced.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherSolverAdvanced.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherSolverAdvanced.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherSolverAdvanced.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherSolverAdvanced.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/AppPathGui.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherMessages.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherMessages.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherMessages.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherMessages.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherMessages.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherMessages.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherMessages.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherMessages.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherMessages.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherMessages.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherMessages.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherMessages.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherMessages.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherMessages.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherMessages.h:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherMessages.cpp:29: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherSolverAdvanced.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherSolverAdvanced.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherSolverAdvanced.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherSolverAdvanced.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherSolverAdvanced.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherSolverAdvanced.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherSolverAdvanced.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherSolverAdvanced.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherSolverAdvanced.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherSolverAdvanced.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherSolverAdvanced.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherSolverAdvanced.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherSolverAdvanced.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherSolverAdvanced.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherSolverAdvanced.h:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherSolverAdvanced.cpp:29: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 96%] Building CXX object src/Mod/Path/Gui/CMakeFiles/PathGui.dir/AppPathGuiPy.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPathGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PathGui.dir/AppPathGuiPy.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/AppPathGuiPy.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/ui_DlgSettingsPathColor.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/AppPathGui.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/AppPathGui.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/ui_DlgSettingsPathColor.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/AppPathGui.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/AppPathGui.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherGeneral.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherGeneral.cpp:29: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/ui_DlgSettingsPathColor.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/AppPathGui.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/AppPathGui.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/ui_DlgSettingsPathColor.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/AppPathGui.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/AppPathGui.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/ui_DlgSettingsPathColor.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/AppPathGui.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/AppPathGui.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherMessages.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherMessages.cpp:29: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherSolverAdvanced.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherSolverAdvanced.cpp:29: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherGeneral.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherGeneral.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherGeneral.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherMessages.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherMessages.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherMessages.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherMessages.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherMessages.cpp:29: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherSolverAdvanced.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherSolverAdvanced.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherSolverAdvanced.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 96%] Building CXX object src/Mod/Path/Gui/CMakeFiles/PathGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPathGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PathGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/PreCompiled.cpp [ 96%] Building CXX object src/Mod/Path/Gui/CMakeFiles/PathGui.dir/DlgSettingsPathColor.cpp.o In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherSolverAdvanced.h:19, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherSolverAdvanced.cpp:29: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPathGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PathGui.dir/DlgSettingsPathColor.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.cpp [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/ShortcutListener.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/ShortcutListener.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ShortcutListener.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherValidation.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherValidation.cpp:52: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/AppPathGuiPy.cpp:38: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/ui_DlgSettingsPathColor.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/ui_DlgSettingsPathColor.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/ui_DlgSettingsPathColor.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/ui_DlgSettingsPathColor.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/ViewProviderSketch.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/ViewProviderSketch.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/ui_DlgSettingsPathColor.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/ui_DlgSettingsPathColor.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/ui_DlgSettingsPathColor.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/ui_DlgSettingsPathColor.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/ui_DlgSettingsPathColor.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.cpp:28: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui/ui_DlgSettingsPathColor.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgSettingsPathColor.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherValidation.cpp:56: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_TaskSketcherValidation.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherValidation.cpp:51: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 96%] Building CXX object src/Mod/Path/Gui/CMakeFiles/PathGui.dir/TaskDlgPathCompound.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPathGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PathGui.dir/TaskDlgPathCompound.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/TaskDlgPathCompound.cpp [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/DrawSketchHandler.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/DrawSketchHandler.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/DrawSketchHandler.cpp [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/Workbench.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/Workbench.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/Workbench.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider2DObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ShortcutListener.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/EditDatumDialog.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/EditDatumDialog.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:76: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/SketchOrientationDialog.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/SketchOrientationDialog.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketchOrientationDialog.cpp [ 96%] Building CXX object src/Mod/Path/Gui/CMakeFiles/PathGui.dir/DlgProcessorChooser.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPathGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PathGui.dir/DlgProcessorChooser.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgProcessorChooser.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/TaskDlgPathCompound.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/TaskDlgPathCompound.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/TaskDlgPathCompound.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/TaskDlgPathCompound.cpp:29: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ShortcutListener.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qevent.h:43, from /usr/include/qt5/QtGui/QKeyEvent:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ShortcutListener.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/SketchMirrorDialog.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/SketchMirrorDialog.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketchMirrorDialog.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/TaskDlgPathCompound.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/TaskDlgPathCompound.cpp:29: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:92: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:99: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:100: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:100: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:100: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:100: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:100: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:100: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:101: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgRunExternal.h:44:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 44 | DlgRunExternal(QWidget* parent = 0, Qt::WindowFlags fl = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:101: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/DlgEditFileIncludeProptertyExternal.h:42:116: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 42 | DlgEditFileIncludePropertyExternal( App::PropertyFileIncluded& Prop, QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:62: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/SketcherSettings.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/SketcherSettings.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherSettings.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskWatcher.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Workbench.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/Workbench.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/Workbench.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/TaskDlgPathCompound.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qscrollarea.h:43, from /usr/include/qt5/QtWidgets/QScrollArea:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/TaskDlgPathCompound.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/TaskDlgPathCompound.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/DrawSketchHandler.cpp:39: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/DrawSketchHandler.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpainter.h:43, from /usr/include/qt5/QtGui/QPainter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/DrawSketchHandler.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/DrawSketchHandler.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpainter.h:43, from /usr/include/qt5/QtGui/QPainter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/DrawSketchHandler.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/DrawSketchHandler.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpainter.h:43, from /usr/include/qt5/QtGui/QPainter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/DrawSketchHandler.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/DrawSketchHandler.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpainter.h:43, from /usr/include/qt5/QtGui/QPainter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/DrawSketchHandler.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/DrawSketchHandler.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpainter.h:43, from /usr/include/qt5/QtGui/QPainter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/DrawSketchHandler.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/DrawSketchHandler.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpainter.h:43, from /usr/include/qt5/QtGui/QPainter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/DrawSketchHandler.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/DrawSketchHandler.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpainter.h:43, from /usr/include/qt5/QtGui/QPainter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/DrawSketchHandler.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/DrawSketchHandler.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpainter.h:43, from /usr/include/qt5/QtGui/QPainter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/DrawSketchHandler.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskDlgEditSketch.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:116: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskDlgEditSketch.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:116: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/DlgProcessorChooser.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp: In member function 'QImage SketcherGui::ViewProviderSketch::renderConstrIcon(const QString&, const QColor&, const QStringList&, const QList&, double, std::vector >*, int*)': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:3440:47: warning: 'int QFontMetrics::width(const QString&, int) const' is deprecated: Use QFontMetrics::horizontalAdvance [-Wdeprecated-declarations] 3440 | cursorOffset += qfm.width(labelStr); | ^ In file included from /usr/include/qt5/QtWidgets/qwidget.h:50, from /usr/include/qt5/QtWidgets/qaction.h:46, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.cpp:62: /usr/include/qt5/QtGui/qfontmetrics.h:106:9: note: declared here 106 | int width(const QString &, int len = -1) const; | ^~~~~ [ 96%] Building CXX object src/Mod/Path/Gui/CMakeFiles/PathGui.dir/ViewProviderPath.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPathGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PathGui.dir/ViewProviderPath.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderPath.cpp [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/SketchRectangularArrayDialog.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/SketchRectangularArrayDialog.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketchRectangularArrayDialog.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_InsertDatum.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_InsertDatum.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_InsertDatum.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_InsertDatum.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_InsertDatum.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/EditDatumDialog.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketcherSettings.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherSettings.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpainter.h:43, from /usr/include/qt5/QtGui/QPainter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherSettings.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketcherSettings.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherSettings.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpainter.h:43, from /usr/include/qt5/QtGui/QPainter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherSettings.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Tools.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketchMirrorDialog.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 96%] Building CXX object src/Mod/Path/Gui/CMakeFiles/PathGui.dir/ViewProviderPathCompound.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPathGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PathGui.dir/ViewProviderPathCompound.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderPathCompound.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketcherSettings.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherSettings.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpainter.h:43, from /usr/include/qt5/QtGui/QPainter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherSettings.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketcherSettings.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherSettings.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpainter.h:43, from /usr/include/qt5/QtGui/QPainter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherSettings.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketcherSettings.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherSettings.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpainter.h:43, from /usr/include/qt5/QtGui/QPainter:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherSettings.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherGeneral.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherSettings.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketcherSettings.h:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherSettings.cpp:33: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/SketcherRegularPolygonDialog.cpp.o In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketchRectangularArrayDialog.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketchRectangularArrayDialog.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketchRectangularArrayDialog.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketchRectangularArrayDialog.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketchRectangularArrayDialog.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketchRectangularArrayDialog.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/SketcherRegularPolygonDialog.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherRegularPolygonDialog.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketchRectangularArrayDialog.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketchRectangularArrayDialog.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketchRectangularArrayDialog.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketchRectangularArrayDialog.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketchRectangularArrayDialog.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketchRectangularArrayDialog.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketchRectangularArrayDialog.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketchRectangularArrayDialog.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketchRectangularArrayDialog.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketcherSettings.h:21, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherSettings.cpp:33: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/TaskDlgEditSketch.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/TaskDlgEditSketch.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskDlgEditSketch.cpp [ 96%] Building CXX object src/Mod/Sketcher/Gui/CMakeFiles/SketcherGui.dir/ViewProviderPython.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DSketcherGui_EXPORTS -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/SketcherGui.dir/ViewProviderPython.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderPython.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderPath.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderPath.cpp:46: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 96%] Building CXX object src/Mod/Path/Gui/CMakeFiles/PathGui.dir/ViewProviderPathShape.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPathGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PathGui.dir/ViewProviderPathShape.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderPathShape.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskDlgEditSketch.cpp:27: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderPath.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderPath.cpp:43: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderPath.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderPath.cpp:43: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderPath.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderPath.cpp:43: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderPath.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderPath.cpp:43: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderPath.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderPath.cpp:43: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SoFCUnifiedSelection.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderPath.cpp:59: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qiodevice.h:43, from /usr/include/qt5/QtCore/qfiledevice.h:43, from /usr/include/qt5/QtCore/qfile.h:44, from /usr/include/qt5/QtCore/QFile:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderPath.cpp:43: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Selection.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Control.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderPathCompound.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketcherRegularPolygonDialog.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherRegularPolygonDialog.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherRegularPolygonDialog.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketcherRegularPolygonDialog.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherRegularPolygonDialog.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherRegularPolygonDialog.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/TaskDlgPathCompound.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderPathCompound.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/TaskDlgPathCompound.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderPathCompound.cpp:34: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 96%] Building CXX object src/Mod/Path/Gui/CMakeFiles/PathGui.dir/ViewProviderArea.cpp.o In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketcherRegularPolygonDialog.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherRegularPolygonDialog.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherRegularPolygonDialog.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPathGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui -I/usr/include/Coin4 -I/usr/include/opencascade -I/usr/include/eigen3 -I/usr/include/python3.8 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PathGui.dir/ViewProviderArea.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderArea.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketcherRegularPolygonDialog.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherRegularPolygonDialog.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherRegularPolygonDialog.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui/ui_SketcherRegularPolygonDialog.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherRegularPolygonDialog.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtGui/qpixmap.h:43, from /usr/include/qt5/QtGui/QPixmap:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/SketcherRegularPolygonDialog.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/SketchObject.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderPython.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderPathShape.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskDlgEditSketch.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskDlgEditSketch.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialogbuttonbox.h:43, from /usr/include/qt5/QtWidgets/QDialogButtonBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskDialog.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskDlgEditSketch.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskDlgEditSketch.cpp:30: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskDlgEditSketch.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskDlgEditSketch.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskSketcherConstrains.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskDlgEditSketch.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/TaskDlgEditSketch.cpp:30: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Path/Gui/ViewProviderArea.cpp:28: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderSketch.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderPython.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderPython.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Expression.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/App/SketchObject.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Sketcher/Gui/ViewProviderPython.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 96%] Linking CXX shared library ../../../../Mod/Path/PathGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Path/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/PathGui.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,PathGui.so -o ../../../../Mod/Path/PathGui.so CMakeFiles/PathGui.dir/qrc_Path.cpp.o CMakeFiles/PathGui.dir/Command.cpp.o CMakeFiles/PathGui.dir/AppPathGui.cpp.o CMakeFiles/PathGui.dir/AppPathGuiPy.cpp.o CMakeFiles/PathGui.dir/PreCompiled.cpp.o CMakeFiles/PathGui.dir/DlgSettingsPathColor.cpp.o CMakeFiles/PathGui.dir/TaskDlgPathCompound.cpp.o CMakeFiles/PathGui.dir/DlgProcessorChooser.cpp.o CMakeFiles/PathGui.dir/ViewProviderPath.cpp.o CMakeFiles/PathGui.dir/ViewProviderPathCompound.cpp.o CMakeFiles/PathGui.dir/ViewProviderPathShape.cpp.o CMakeFiles/PathGui.dir/ViewProviderArea.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Path:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Path/Path.so ../../../../Mod/Part/PartGui.so ../../../../lib/libFreeCADGui.so ../../../../lib/libarea-native.so -lCoin /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5Widgets.so.5.15.2 /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so ../../../../Mod/Part/Part.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so /usr/lib64/libfreetype.so /usr/lib64/libQt5Concurrent.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 96%] Built target PathGui [ 96%] Linking CXX shared library ../../../../Mod/Sketcher/SketcherGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/Sketcher/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/SketcherGui.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,SketcherGui.so -o ../../../../Mod/Sketcher/SketcherGui.so CMakeFiles/SketcherGui.dir/qrc_Sketcher.cpp.o CMakeFiles/SketcherGui.dir/AppSketcherGui.cpp.o CMakeFiles/SketcherGui.dir/Command.cpp.o CMakeFiles/SketcherGui.dir/CommandCreateGeo.cpp.o CMakeFiles/SketcherGui.dir/CommandConstraints.cpp.o CMakeFiles/SketcherGui.dir/CommandSketcherTools.cpp.o CMakeFiles/SketcherGui.dir/CommandSketcherBSpline.cpp.o CMakeFiles/SketcherGui.dir/CommandSketcherVirtualSpace.cpp.o CMakeFiles/SketcherGui.dir/CommandAlterGeometry.cpp.o CMakeFiles/SketcherGui.dir/PreCompiled.cpp.o CMakeFiles/SketcherGui.dir/SoZoomTranslation.cpp.o CMakeFiles/SketcherGui.dir/SoDatumLabel.cpp.o CMakeFiles/SketcherGui.dir/PropertyConstraintListItem.cpp.o CMakeFiles/SketcherGui.dir/TaskSketcherConstrains.cpp.o CMakeFiles/SketcherGui.dir/TaskSketcherElements.cpp.o CMakeFiles/SketcherGui.dir/TaskSketcherCreateCommands.cpp.o CMakeFiles/SketcherGui.dir/TaskSketcherGeneral.cpp.o CMakeFiles/SketcherGui.dir/TaskSketcherMessages.cpp.o CMakeFiles/SketcherGui.dir/TaskSketcherSolverAdvanced.cpp.o CMakeFiles/SketcherGui.dir/TaskSketcherValidation.cpp.o CMakeFiles/SketcherGui.dir/ShortcutListener.cpp.o CMakeFiles/SketcherGui.dir/ViewProviderSketch.cpp.o CMakeFiles/SketcherGui.dir/DrawSketchHandler.cpp.o CMakeFiles/SketcherGui.dir/Workbench.cpp.o CMakeFiles/SketcherGui.dir/EditDatumDialog.cpp.o CMakeFiles/SketcherGui.dir/SketchOrientationDialog.cpp.o CMakeFiles/SketcherGui.dir/SketchMirrorDialog.cpp.o CMakeFiles/SketcherGui.dir/SketcherSettings.cpp.o CMakeFiles/SketcherGui.dir/SketchRectangularArrayDialog.cpp.o CMakeFiles/SketcherGui.dir/SketcherRegularPolygonDialog.cpp.o CMakeFiles/SketcherGui.dir/TaskDlgEditSketch.cpp.o CMakeFiles/SketcherGui.dir/ViewProviderPython.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Sketcher:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/Sketcher/Sketcher.so ../../../../Mod/Part/PartGui.so ../../../../lib/libFreeCADGui.so -lCoin /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5Widgets.so.5.15.2 /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so ../../../../Mod/Part/Part.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lpthread -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so /usr/lib64/libfreetype.so /usr/lib64/libQt5Concurrent.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 96%] Built target SketcherGui /usr/bin/gmake -f src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/build.make src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/depend gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 96%] Copying /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Resources/icons/PartDesignWorkbench.svg to /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/PartDesign/Resources/icons/PartDesignWorkbench.svg [ 96%] Generating moc_TaskChamferParameters.cpp [ 96%] Generating moc_TaskBooleanParameters.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/cmake -E copy /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Resources/icons/PartDesignWorkbench.svg /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/usr/share/freecad/Mod/PartDesign/Resources/icons/PartDesignWorkbench.svg cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskBooleanParameters.cpp_parameters cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskChamferParameters.cpp_parameters [ 96%] Generating moc_TaskDatumParameters.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskDatumParameters.cpp_parameters [ 96%] Generating moc_TaskDraftParameters.cpp [ 97%] Generating moc_TaskDressUpParameters.cpp [ 97%] Generating moc_TaskFeatureParameters.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskDraftParameters.cpp_parameters cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskDressUpParameters.cpp_parameters cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskFeatureParameters.cpp_parameters [ 97%] Generating moc_TaskFeaturePick.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskFeaturePick.cpp_parameters [ 97%] Generating moc_TaskFilletParameters.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskFilletParameters.cpp_parameters [ 97%] Generating moc_TaskHoleParameters.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskHoleParameters.cpp_parameters [ 97%] Generating moc_TaskLinearPatternParameters.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskLinearPatternParameters.cpp_parameters [ 97%] Generating moc_TaskLoftParameters.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskLoftParameters.cpp_parameters [ 97%] Generating moc_TaskMirroredParameters.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskMirroredParameters.cpp_parameters [ 97%] Generating moc_TaskMultiTransformParameters.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskMultiTransformParameters.cpp_parameters [ 97%] Generating moc_TaskPadParameters.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskPadParameters.cpp_parameters [ 97%] Generating moc_TaskPipeParameters.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskPipeParameters.cpp_parameters [ 97%] Generating moc_TaskPocketParameters.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskPocketParameters.cpp_parameters [ 97%] Generating moc_TaskPolarPatternParameters.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskPolarPatternParameters.cpp_parameters [ 97%] Generating moc_TaskPrimitiveParameters.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskPrimitiveParameters.cpp_parameters [ 97%] Generating moc_TaskRevolutionParameters.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskRevolutionParameters.cpp_parameters [ 97%] Generating moc_TaskScaledParameters.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskScaledParameters.cpp_parameters [ 97%] Generating moc_TaskShapeBinder.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskShapeBinder.cpp_parameters [ 97%] Generating moc_TaskSketchBasedParameters.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskSketchBasedParameters.cpp_parameters [ 97%] Generating moc_TaskThicknessParameters.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskThicknessParameters.cpp_parameters [ 97%] Generating moc_TaskTransformedMessages.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskTransformedMessages.cpp_parameters [ 97%] Generating moc_TaskTransformedParameters.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/moc @/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/moc_TaskTransformedParameters.cpp_parameters [ 97%] Generating qrc_PartDesign.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/rcc --name PartDesign --output /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/qrc_PartDesign.cpp /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Resources/PartDesign.qrc [ 97%] Generating ui_DlgReference.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_DlgReference.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/DlgReference.ui [ 97%] Generating ui_TaskBooleanParameters.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskBooleanParameters.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskBooleanParameters.ui [ 97%] Generating ui_TaskChamferParameters.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskChamferParameters.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskChamferParameters.ui [ 97%] Generating ui_TaskDraftParameters.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskDraftParameters.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDraftParameters.ui [ 97%] Generating ui_TaskFeaturePick.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskFeaturePick.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeaturePick.ui [ 97%] Generating ui_TaskHoleParameters.h [ 97%] Generating ui_TaskFilletParameters.h [ 97%] Generating ui_TaskLinearPatternParameters.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskHoleParameters.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskHoleParameters.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskFilletParameters.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFilletParameters.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskLinearPatternParameters.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskLinearPatternParameters.ui [ 97%] Generating ui_TaskLoftParameters.h [ 97%] Generating ui_TaskMirroredParameters.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskLoftParameters.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskLoftParameters.ui [ 97%] Generating ui_TaskMultiTransformParameters.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskMirroredParameters.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMirroredParameters.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskMultiTransformParameters.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMultiTransformParameters.ui [ 98%] Generating ui_TaskPadParameters.h [ 98%] Generating ui_TaskPipeOrientation.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPadParameters.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPadParameters.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPipeOrientation.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPipeOrientation.ui [ 98%] Generating ui_TaskPipeParameters.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPipeParameters.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPipeParameters.ui [ 98%] Generating ui_TaskPipeScaling.h [ 98%] Generating ui_TaskPocketParameters.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPipeScaling.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPipeScaling.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPocketParameters.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPocketParameters.ui [ 98%] Generating ui_TaskPolarPatternParameters.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPolarPatternParameters.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPolarPatternParameters.ui [ 98%] Generating ui_TaskPrimitiveParameters.h [ 98%] Generating ui_TaskRevolutionParameters.h [ 98%] Generating ui_TaskScaledParameters.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPrimitiveParameters.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPrimitiveParameters.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskRevolutionParameters.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskRevolutionParameters.ui [ 98%] Generating ui_TaskShapeBinder.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskScaledParameters.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskScaledParameters.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskShapeBinder.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskShapeBinder.ui [ 98%] Generating ui_TaskThicknessParameters.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskThicknessParameters.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskThicknessParameters.ui [ 98%] Generating ui_TaskTransformedMessages.h cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/lib64/qt5/bin/uic -o /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskTransformedMessages.h /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskTransformedMessages.ui cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/DependInfo.cmake --color= Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/DependInfo.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/depend.internal". Dependee "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/depend.internal". Scanning dependencies of target PartDesignGui gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/gmake -f src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/build.make src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/build gmake[2]: Entering directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [ 98%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/qrc_PartDesign.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/qrc_PartDesign.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/qrc_PartDesign.cpp [ 98%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/AppPartDesignGui.cpp.o [ 98%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/Command.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/AppPartDesignGui.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/AppPartDesignGui.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/Command.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Command.cpp [ 98%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/CommandPrimitive.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/CommandPrimitive.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandPrimitive.cpp [ 98%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/CommandBody.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/CommandBody.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandBody.cpp [ 98%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/PreCompiled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/PreCompiled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/PreCompiled.cpp [ 98%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/Utils.cpp.o [ 98%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/Workbench.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/Utils.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Utils.cpp cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/Workbench.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Workbench.cpp [ 98%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/WorkflowManager.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/WorkflowManager.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/WorkflowManager.cpp [ 98%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskFeaturePick.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskFeaturePick.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeaturePick.cpp In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Workbench.cpp:27: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/WorkflowManager.cpp:29: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtension.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/BodyBase.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/Body.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandPrimitive.cpp:25: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeatureGroupExtension.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginGroupExtension.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Part.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Utils.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/AppPartDesignGui.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectGroup.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Command.cpp:41: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Origin.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandBody.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Utils.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Utils.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeaturePick.cpp:30: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Workbench.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Workbench.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandBody.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandBody.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Command.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Command.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeaturePick.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qalgorithms.h:43, from /usr/include/qt5/QtCore/qlist.h:43, from /usr/include/qt5/QtCore/QListIterator:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeaturePick.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandBody.cpp:43: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandBody.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Command.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Command.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandBody.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandBody.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandBody.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandBody.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandBody.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandBody.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandBody.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandBody.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandBody.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandBody.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandBody.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qapplication.h:43, from /usr/include/qt5/QtWidgets/QApplication:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandBody.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Command.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Command.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Command.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Command.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Command.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Command.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Command.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Command.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Command.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Command.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Command.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Command.cpp:34: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 98%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ReferenceSelection.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ReferenceSelection.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ReferenceSelection.cpp [ 98%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskFeatureParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskFeatureParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeatureParameters.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeaturePick.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Command.cpp:66: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeaturePick.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/Command.cpp:66: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeaturePick.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandBody.cpp:53: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeaturePick.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/CommandBody.cpp:53: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeaturePick.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeaturePick.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeaturePick.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeaturePick.cpp:50: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 98%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskSketchBasedParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskSketchBasedParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskSketchBasedParameters.cpp [ 98%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskPadParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskPadParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPadParameters.cpp [ 98%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskPocketParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskPocketParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPocketParameters.cpp [ 98%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskChamferParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskChamferParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskChamferParameters.cpp [ 98%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskFilletParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskFilletParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFilletParameters.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/OriginFeature.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ReferenceSelection.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPocketParameters.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPocketParameters.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPocketParameters.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPocketParameters.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPocketParameters.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPocketParameters.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskSketchBasedParameters.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPadParameters.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPadParameters.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPadParameters.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPadParameters.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPadParameters.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPadParameters.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ReferenceSelection.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qdialog.h:43, from /usr/include/qt5/QtWidgets/QDialog:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ReferenceSelection.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeatureParameters.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeaturePick.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ReferenceSelection.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeaturePick.h:26, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ReferenceSelection.cpp:52: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeatureParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeatureParameters.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeatureParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeatureParameters.cpp:36: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPadParameters.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPadParameters.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPadParameters.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPadParameters.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPadParameters.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPadParameters.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPadParameters.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPadParameters.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPadParameters.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPadParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPadParameters.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPadParameters.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPadParameters.cpp:33: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPocketParameters.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPocketParameters.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPocketParameters.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPocketParameters.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPocketParameters.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPocketParameters.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPocketParameters.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPocketParameters.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPocketParameters.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPocketParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPocketParameters.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPocketParameters.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPocketParameters.cpp:33: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskSketchBasedParameters.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskSketchBasedParameters.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPocketParameters.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPocketParameters.cpp:33: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPadParameters.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPadParameters.cpp:33: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFilletParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFilletParameters.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskFilletParameters.h:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFilletParameters.cpp:30: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskDraftParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskDraftParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDraftParameters.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskChamferParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskChamferParameters.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskChamferParameters.h:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskChamferParameters.cpp:30: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskThicknessParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskThicknessParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskThicknessParameters.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPadParameters.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPadParameters.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPocketParameters.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPocketParameters.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeatureParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskSketchBasedParameters.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskSketchBasedParameters.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeatureParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskSketchBasedParameters.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskSketchBasedParameters.cpp:54: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskDressUpParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskDressUpParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QuantitySpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskChamferParameters.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskChamferParameters.cpp:30: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QuantitySpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskFilletParameters.h:20, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFilletParameters.cpp:30: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFilletParameters.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFilletParameters.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskChamferParameters.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskChamferParameters.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskRevolutionParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskRevolutionParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskRevolutionParameters.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDraftParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDraftParameters.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskDraftParameters.h:16, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDraftParameters.cpp:31: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.cpp:30: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskThicknessParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskThicknessParameters.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskThicknessParameters.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskThicknessParameters.cpp:30: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QuantitySpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskDraftParameters.h:22, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDraftParameters.cpp:31: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskTransformedMessages.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskTransformedMessages.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskTransformedMessages.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.cpp:30: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QuantitySpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskThicknessParameters.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskThicknessParameters.cpp:30: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskTransformedParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskTransformedParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskTransformedParameters.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDraftParameters.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDraftParameters.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qlistwidget.h:43, from /usr/include/qt5/QtWidgets/QListWidgetItem:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskMirroredParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskMirroredParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMirroredParameters.cpp [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskLinearPatternParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskLinearPatternParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskLinearPatternParameters.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskThicknessParameters.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskThicknessParameters.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskRevolutionParameters.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskPolarPatternParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskPolarPatternParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPolarPatternParameters.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskTransformedMessages.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskTransformedMessages.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskTransformedMessages.h:14, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskTransformedMessages.cpp:29: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskScaledParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskScaledParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskScaledParameters.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskRevolutionParameters.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/UnitsApi.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskRevolutionParameters.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskMultiTransformParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskMultiTransformParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMultiTransformParameters.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskTransformedMessages.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskTransformedMessages.cpp:30: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskTransformedMessages.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskTransformedMessages.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskTransformedMessages.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskTransformedMessages.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskTransformedMessages.cpp:30: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskRevolutionParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskRevolutionParameters.cpp:53: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskRevolutionParameters.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskRevolutionParameters.cpp:52: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskTransformedParameters.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskTransformedParameters.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskTransformedParameters.cpp:26: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskScaledParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskScaledParameters.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskScaledParameters.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskScaledParameters.cpp:31: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMultiTransformParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskTransformedParameters.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMultiTransformParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskTransformedParameters.cpp:52: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMirroredParameters.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskLinearPatternParameters.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMirroredParameters.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMirroredParameters.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMultiTransformParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMultiTransformParameters.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskMultiTransformParameters.h:16, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMultiTransformParameters.cpp:31: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPolarPatternParameters.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskScaledParameters.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskScaledParameters.cpp:31: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskLinearPatternParameters.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskLinearPatternParameters.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskHoleParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskHoleParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskHoleParameters.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPolarPatternParameters.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPolarPatternParameters.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskDatumParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskDatumParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDatumParameters.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMultiTransformParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMultiTransformParameters.cpp:32: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskScaledParameters.cpp:38: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskScaledParameters.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskShapeBinder.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskShapeBinder.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskShapeBinder.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMultiTransformParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMirroredParameters.cpp:50: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMultiTransformParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMirroredParameters.cpp:50: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMultiTransformParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPolarPatternParameters.cpp:52: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMultiTransformParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPolarPatternParameters.cpp:52: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMultiTransformParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskLinearPatternParameters.cpp:54: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMultiTransformParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskLinearPatternParameters.cpp:54: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMultiTransformParameters.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMultiTransformParameters.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskHoleParameters.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskHoleParameters.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:180:62: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 180 | CheckListDialog( QWidget* parent = 0, Qt::WindowFlags fl = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskHoleParameters.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskHoleParameters.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskHoleParameters.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskHoleParameters.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Widgets.h:261:56: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 261 | UrlLabel ( QWidget * parent = 0, Qt::WindowFlags f = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskHoleParameters.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskHoleParameters.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDatumParameters.cpp:33: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskHoleParameters.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskHoleParameters.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:51:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskHoleParameters.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskHoleParameters.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskHoleParameters.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskHoleParameters.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:53:121: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 53 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskHoleParameters.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskHoleParameters.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskHoleParameters.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskHoleParameters.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/FileDialog.h:57:126: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = QFileDialog::Option; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 57 | const QString & filter = QString(), QString * selectedFilter = 0, Options options = 0 ); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskHoleParameters.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskHoleParameters.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskHoleParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskHoleParameters.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskHoleParameters.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskHoleParameters.cpp:29: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskBooleanParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskBooleanParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskBooleanParameters.cpp [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskPrimitiveParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskPrimitiveParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPrimitiveParameters.cpp [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskPipeParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskPipeParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPipeParameters.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ExpressionBinding.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/SpinBox.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/PrefWidgets.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskHoleParameters.h:23, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskHoleParameters.cpp:29: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/TaskLoftParameters.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/TaskLoftParameters.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskLoftParameters.cpp /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDatumParameters.cpp:47: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDatumParameters.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskHoleParameters.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qatomic.h:41, from /usr/include/qt5/QtCore/qvariant.h:43, from /usr/include/qt5/QtCore/QVariant:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskHoleParameters.h:12, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskHoleParameters.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskShapeBinder.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDatumParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDatumParameters.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_DlgReference.h:17, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDatumParameters.cpp:38: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskShapeBinder.cpp:34: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskShapeBinder.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProvider.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProvider.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskShapeBinder.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskShapeBinder.cpp:44: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskShapeBinder.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskShapeBinder.cpp:44: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskBooleanParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskBooleanParameters.cpp:32: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskBooleanParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskBooleanParameters.cpp:32: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPipeParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPipeParameters.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ui_TaskPipeParameters.h:18, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPipeParameters.cpp:36: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPrimitiveParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPrimitiveParameters.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPrimitiveParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPrimitiveParameters.cpp:35: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskLoftParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskLoftParameters.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskLoftParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskLoftParameters.cpp:36: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderBody.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderBody.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBody.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPipeParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPipeParameters.cpp:40: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderSketchBased.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderSketchBased.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderSketchBased.cpp [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderPad.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderPad.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPad.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskBooleanParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskBooleanParameters.cpp:32: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskLoftParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskLoftParameters.cpp:36: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPrimitiveParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPrimitiveParameters.cpp:35: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPipeParameters.cpp:46: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPipeParameters.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/bind.hpp:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBody.cpp:27: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskLoftParameters.cpp:40: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qaction.h:43, from /usr/include/qt5/QtWidgets/QAction:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskLoftParameters.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskBooleanParameters.cpp:36: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskBooleanParameters.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPrimitiveParameters.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qregexp.h:43, from /usr/include/qt5/QtCore/QRegExp:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPrimitiveParameters.cpp:28: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPrimitiveParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPrimitiveParameters.cpp:35: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPadParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPad.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPadParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPad.cpp:31: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderSketchBased.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBody.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBody.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Document.h:40, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Tree.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ActiveObjectList.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBody.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBody.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBody.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBody.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBody.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBody.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBody.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBody.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderHole.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderHole.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderHole.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBody.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBody.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBody.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBody.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBody.cpp:42: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmenu.h:43, from /usr/include/qt5/QtWidgets/QMenu:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBody.cpp:31: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.cpp:35: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPadParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPad.cpp:31: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderPocket.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderPocket.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPocket.cpp [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderChamfer.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderChamfer.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderChamfer.cpp [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderFillet.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderFillet.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderFillet.cpp [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderDraft.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderDraft.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDraft.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeatureParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.cpp:45: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFeatureParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.cpp:45: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderThickness.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderThickness.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderThickness.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskChamferParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderChamfer.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskChamferParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderChamfer.cpp:29: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPocketParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPocket.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPocketParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPocket.cpp:31: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderHole.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderHole.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFilletParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderFillet.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFilletParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderFillet.cpp:29: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDraftParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDraft.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDraftParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDraft.cpp:29: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskChamferParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderChamfer.cpp:29: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskHoleParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderHole.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskHoleParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderHole.cpp:33: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPocketParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPocket.cpp:31: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderHole.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderHole.cpp:32: /usr/include/boost/bind.hpp: At global scope: /usr/include/boost/bind.hpp:36:1: note: '#pragma message: The practice of declaring the Bind placeholders (_1, _2, ...) in the global namespace is deprecated. Please use + using namespace boost::placeholders, or define BOOST_BIND_GLOBAL_PLACEHOLDERS to retain the current behavior.' 36 | BOOST_PRAGMA_MESSAGE( | ^~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskFilletParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderFillet.cpp:29: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderDressUp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderDressUp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDressUp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDraftParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDraft.cpp:29: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderRevolution.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderRevolution.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderRevolution.cpp [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderGroove.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderGroove.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderGroove.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskThicknessParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderThickness.cpp:29: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskThicknessParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderThickness.cpp:29: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderTransformed.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderTransformed.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderTransformed.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskThicknessParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderThickness.cpp:29: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [ 99%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderMirrored.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderMirrored.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderMirrored.cpp [100%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderLinearPattern.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderLinearPattern.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderLinearPattern.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskRevolutionParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderRevolution.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskRevolutionParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderRevolution.cpp:31: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskRevolutionParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderGroove.cpp:31: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskRevolutionParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderGroove.cpp:31: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [100%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderPolarPattern.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderPolarPattern.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPolarPattern.cpp [100%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderScaled.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderScaled.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderScaled.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/Feature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/FeatureDressUp.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDressUp.cpp:34: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskRevolutionParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderRevolution.cpp:31: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskRevolutionParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderGroove.cpp:31: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDressUp.cpp:39: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDressUpParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDressUp.cpp:39: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderTransformed.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderLinearPattern.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderLinearPattern.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderTransformed.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderTransformed.cpp:50: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskLinearPatternParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderLinearPattern.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskLinearPatternParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderLinearPattern.cpp:30: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [100%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderMultiTransform.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderMultiTransform.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderMultiTransform.cpp [100%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderDatum.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderDatum.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatum.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderTransformed.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPolarPattern.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPolarPattern.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderTransformed.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderScaled.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderScaled.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPolarPatternParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPolarPattern.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPolarPatternParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPolarPattern.cpp:30: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderTransformed.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderMirrored.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderMirrored.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskTransformedParameters.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderTransformed.cpp:51: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskTransformedParameters.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderTransformed.cpp:51: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [100%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderDatumPoint.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderDatumPoint.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatumPoint.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskScaledParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderScaled.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskScaledParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderScaled.cpp:30: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMirroredParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderMirrored.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMirroredParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderMirrored.cpp:30: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [100%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderDatumLine.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderDatumLine.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatumLine.cpp [100%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderDatumPlane.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderDatumPlane.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatumPlane.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/GeoFeature.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/FeaturePython.h:31, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObjectGroup.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatum.cpp:55: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [100%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderDatumCS.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderDatumCS.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatumCS.cpp [100%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderShapeBinder.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderShapeBinder.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderShapeBinder.cpp In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatum.cpp:60: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatum.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ [100%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderBoolean.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderBoolean.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBoolean.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatumPoint.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatumPoint.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatum.cpp:62: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventor.h:71:122: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 71 | View3DInventor(Gui::Document* pcDocument, QWidget* parent, const QtGLWidget* sharewidget = 0, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatum.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatum.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:84:104: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 84 | explicit QuarterWidget(QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatum.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatum.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:85:127: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 85 | explicit QuarterWidget(QtGLContext * context, QWidget * parent = 0, const QtGLWidget * sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatum.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:24, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatum.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/QuarterWidget.h:86:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 86 | explicit QuarterWidget(const QtGLFormat & format, QWidget * parent = 0, const QtGLWidget * shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatum.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatum.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:50:109: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 50 | explicit SoQTQuarterAdaptor(QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatum.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatum.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:51:135: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 51 | explicit SoQTQuarterAdaptor(const QtGLFormat& format, QWidget* parent = 0, const QtGLWidget* shareWidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatum.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/View3DInventorViewer.h:36, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatum.cpp:63: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Quarter/SoQTQuarterAdaptor.h:52:131: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 52 | explicit SoQTQuarterAdaptor(QtGLContext* context, QWidget* parent = 0, const QtGLWidget* sharewidget = 0, Qt::WindowFlags f = 0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatum.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDatumParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatum.cpp:71: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDatumParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatum.cpp:71: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderTransformed.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderMultiTransform.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderMultiTransform.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/DatumFeature.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/DatumLine.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatumLine.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyExpressionEngine.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/DocumentObject.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PropertyTopoShape.h:29, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/PartFeature.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/App/DatumFeature.h:30, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/App/DatumPlane.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatumPlane.cpp:33: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMultiTransformParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderMultiTransform.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskMultiTransformParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderMultiTransform.cpp:30: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDatumParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatumCS.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDatumParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatumCS.cpp:37: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [100%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderAddSub.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderAddSub.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderAddSub.cpp [100%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderPrimitive.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderPrimitive.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPrimitive.cpp [100%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderPipe.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderPipe.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPipe.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskDatumParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderDatumCS.cpp:37: /usr/include/boost/detail/iterator.hpp: At global scope: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ [100%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderLoft.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderLoft.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderLoft.cpp [100%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderBase.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderBase.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBase.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBoolean.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBoolean.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/Application.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Application.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderShapeBinder.cpp:35: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskBooleanParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBoolean.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskBooleanParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBoolean.cpp:33: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskShapeBinder.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderShapeBinder.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskShapeBinder.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderShapeBinder.cpp:41: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ [100%] Building CXX object src/Mod/PartDesign/Gui/CMakeFiles/PartDesignGui.dir/ViewProviderPyImp.cpp.o cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/c++ -DBOOST_ALL_NO_LIB -DBOOST_FILESYSTEM_DYN_LINK -DBOOST_PROGRAM_OPTIONS_DYN_LINK -DBOOST_REGEX_DYN_LINK -DBOOST_SYSTEM_DYN_LINK -DBOOST_THREAD_DYN_LINK -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DHAVE_TBB -DHAVE_VTK -DOCC_CONVERT_SIGNALS -DPYCXX_6_2_COMPATIBILITY -DPYCXX_PYTHON_2TO3 -DPartDesignGui_EXPORTS -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_UITOOLS_LIB -DQT_WIDGETS_LIB -DQT_X11EXTRAS_LIB -DQT_XML_LIB -DVTK_OPENGL2_BACKEND -D_OCC64 -DvtkDomainsChemistry_AUTOINIT="2(vtkDomainsChemistryOpenGL2,vtkDomainsParallelChemistry)" -DvtkFiltersCore_AUTOINIT="1(vtkFiltersParallelDIY2)" -DvtkFiltersParallel_AUTOINIT="2(vtkFiltersParallelDIY2,vtkFiltersParallelGeometry)" -DvtkIOExport_AUTOINIT="2(vtkIOExportOpenGL2,vtkIOExportPDF)" -DvtkIOGeometry_AUTOINIT="1(vtkIOMPIParallel)" -DvtkIOImage_AUTOINIT="1(vtkIOMPIImage)" -DvtkIOParallel_AUTOINIT="1(vtkIOMPIParallel)" -DvtkRenderingContext2D_AUTOINIT="1(vtkRenderingContextOpenGL2)" -DvtkRenderingCore_AUTOINIT="3(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingOpenGL2)" -DvtkRenderingOpenGL2_AUTOINIT="1(vtkRenderingGL2PSOpenGL2)" -DvtkRenderingVolume_AUTOINIT="1(vtkRenderingVolumeOpenGL2)" -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src -I/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui -I/usr/include/opencascade -I/usr/include/Coin4 -I/usr/include/python3.8 -I/usr/include/eigen3 -isystem /usr/include/qt5 -isystem /usr/include/qt5/QtCore -isystem /usr/lib64/qt5/mkspecs/linux-g++ -isystem /usr/include/qt5/QtXml -isystem /usr/include/qt5/QtWidgets -isystem /usr/include/qt5/QtGui -isystem /usr/include/qt5/QtOpenGL -isystem /usr/include/qt5/QtPrintSupport -isystem /usr/include/qt5/QtSvg -isystem /usr/include/qt5/QtNetwork -isystem /usr/include/qt5/QtUiTools -isystem /usr/include/qt5/QtX11Extras -isystem /usr/include/qt5/QtConcurrent -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -fPIC -pthread -fPIC -o CMakeFiles/PartDesignGui.dir/ViewProviderPyImp.cpp.o -c /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPyImp.cpp In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderAddSub.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderAddSub.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBoolean.cpp:41: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h: At global scope: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtGui/qtguiglobal.h:43, from /usr/include/qt5/QtWidgets/qtwidgetsglobal.h:43, from /usr/include/qt5/QtWidgets/qmessagebox.h:43, from /usr/include/qt5/QtWidgets/QMessageBox:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBoolean.cpp:27: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderAddSub.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPipe.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPipe.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderAddSub.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderLoft.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderLoft.cpp:31: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPrimitive.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPrimitive.cpp:32: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBase.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderBase.cpp:29: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskLoftParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderLoft.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskLoftParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderLoft.cpp:33: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPrimitiveParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPrimitive.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPrimitiveParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPrimitive.cpp:33: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPipeParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPipe.cpp:33: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h: In member function 'const QPixmap* QSint::ActionBox::icon() const': /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:185:67: warning: 'const QPixmap* QLabel::pixmap() const' is deprecated: Use the other overload which returns QPixmap by-value [-Wdeprecated-declarations] 185 | inline const QPixmap* icon() const { return iconLabel->pixmap(); } | ^ In file included from /usr/include/qt5/QtWidgets/QLabel:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/../actionpanel/actionbox.h:13, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/QSint/include/QSint:2, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/TaskView/TaskView.h:38, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/TaskPipeParameters.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPipe.cpp:33: /usr/include/qt5/QtWidgets/qlabel.h:78:20: note: declared here 78 | const QPixmap *pixmap() const; // ### Qt 7: Remove function | ^~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/Document.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderAddSub.cpp:37: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/MDIView.h:65:80: warning: 'constexpr QFlags::QFlags(QFlags::Zero) [with Enum = Qt::WindowType; QFlags::Zero = int QFlags::Private::*]' is deprecated: Use default constructor instead [-Wdeprecated-declarations] 65 | MDIView(Gui::Document* pcDocument, QWidget* parent, Qt::WindowFlags wflags=0); | ^ In file included from /usr/include/qt5/QtCore/qglobal.h:1304, from /usr/include/qt5/QtCore/qchar.h:43, from /usr/include/qt5/QtCore/qstring.h:49, from /usr/include/qt5/QtCore/QString:1, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Base/Unit.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/App/PropertyUnits.h:35, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:33, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderAddSub.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderAddSub.cpp:29: /usr/include/qt5/QtCore/qflags.h:123:80: note: declared here 123 | QT_DEPRECATED_X("Use default constructor instead") Q_DECL_CONSTEXPR inline QFlags(Zero) noexcept : i(0) {} | ^~~~~~ In file included from /usr/include/boost/smart_ptr/detail/sp_thread_sleep.hpp:22, from /usr/include/boost/smart_ptr/detail/yield_k.hpp:23, from /usr/include/boost/smart_ptr/detail/spinlock_gcc_atomic.hpp:14, from /usr/include/boost/smart_ptr/detail/spinlock.hpp:42, from /usr/include/boost/smart_ptr/detail/spinlock_pool.hpp:25, from /usr/include/boost/smart_ptr/shared_ptr.hpp:29, from /usr/include/boost/shared_ptr.hpp:17, from /usr/include/boost/signals2/deconstruct.hpp:28, from /usr/include/boost/signals2.hpp:15, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProvider.h:32, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDocumentObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderDragger.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Gui/ViewProviderGeometryObject.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProviderExt.h:34, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/Part/Gui/ViewProvider.h:28, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProvider.h:27, from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPyImp.cpp:26: /usr/include/boost/detail/iterator.hpp:13:1: note: '#pragma message: This header is deprecated. Use instead.' 13 | BOOST_HEADER_DEPRECATED("") | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/src/Mod/PartDesign/Gui/ViewProviderPyImp.cpp:30: /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ViewProviderPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_vectorcall' [-Wmissing-field-initializers] 76 | }; | ^ /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui/ViewProviderPy.cpp:76:1: warning: missing initializer for member '_typeobject::tp_print' [-Wmissing-field-initializers] [100%] Linking CXX shared library ../../../../Mod/PartDesign/PartDesignGui.so cd /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/src/Mod/PartDesign/Gui && /usr/bin/cmake -E cmake_link_script CMakeFiles/PartDesignGui.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -Wall -Wextra -Wno-write-strings -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -std=c++14 -D_OCC64 -DNDEBUG -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--no-undefined -shared -Wl,-soname,PartDesignGui.so -o ../../../../Mod/PartDesign/PartDesignGui.so CMakeFiles/PartDesignGui.dir/qrc_PartDesign.cpp.o CMakeFiles/PartDesignGui.dir/AppPartDesignGui.cpp.o CMakeFiles/PartDesignGui.dir/Command.cpp.o CMakeFiles/PartDesignGui.dir/CommandPrimitive.cpp.o CMakeFiles/PartDesignGui.dir/CommandBody.cpp.o CMakeFiles/PartDesignGui.dir/PreCompiled.cpp.o CMakeFiles/PartDesignGui.dir/Utils.cpp.o CMakeFiles/PartDesignGui.dir/Workbench.cpp.o CMakeFiles/PartDesignGui.dir/WorkflowManager.cpp.o CMakeFiles/PartDesignGui.dir/TaskFeaturePick.cpp.o CMakeFiles/PartDesignGui.dir/ReferenceSelection.cpp.o CMakeFiles/PartDesignGui.dir/TaskFeatureParameters.cpp.o CMakeFiles/PartDesignGui.dir/TaskSketchBasedParameters.cpp.o CMakeFiles/PartDesignGui.dir/TaskPadParameters.cpp.o CMakeFiles/PartDesignGui.dir/TaskPocketParameters.cpp.o CMakeFiles/PartDesignGui.dir/TaskChamferParameters.cpp.o CMakeFiles/PartDesignGui.dir/TaskFilletParameters.cpp.o CMakeFiles/PartDesignGui.dir/TaskDraftParameters.cpp.o CMakeFiles/PartDesignGui.dir/TaskThicknessParameters.cpp.o CMakeFiles/PartDesignGui.dir/TaskDressUpParameters.cpp.o CMakeFiles/PartDesignGui.dir/TaskRevolutionParameters.cpp.o CMakeFiles/PartDesignGui.dir/TaskTransformedMessages.cpp.o CMakeFiles/PartDesignGui.dir/TaskTransformedParameters.cpp.o CMakeFiles/PartDesignGui.dir/TaskMirroredParameters.cpp.o CMakeFiles/PartDesignGui.dir/TaskLinearPatternParameters.cpp.o CMakeFiles/PartDesignGui.dir/TaskPolarPatternParameters.cpp.o CMakeFiles/PartDesignGui.dir/TaskScaledParameters.cpp.o CMakeFiles/PartDesignGui.dir/TaskMultiTransformParameters.cpp.o CMakeFiles/PartDesignGui.dir/TaskHoleParameters.cpp.o CMakeFiles/PartDesignGui.dir/TaskDatumParameters.cpp.o CMakeFiles/PartDesignGui.dir/TaskShapeBinder.cpp.o CMakeFiles/PartDesignGui.dir/TaskBooleanParameters.cpp.o CMakeFiles/PartDesignGui.dir/TaskPrimitiveParameters.cpp.o CMakeFiles/PartDesignGui.dir/TaskPipeParameters.cpp.o CMakeFiles/PartDesignGui.dir/TaskLoftParameters.cpp.o CMakeFiles/PartDesignGui.dir/ViewProvider.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderBody.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderSketchBased.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderPad.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderHole.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderPocket.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderChamfer.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderFillet.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderDraft.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderThickness.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderDressUp.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderRevolution.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderGroove.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderTransformed.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderMirrored.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderLinearPattern.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderPolarPattern.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderScaled.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderMultiTransform.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderDatum.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderDatumPoint.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderDatumLine.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderDatumPlane.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderDatumCS.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderShapeBinder.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderBoolean.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderAddSub.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderPrimitive.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderPipe.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderLoft.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderBase.cpp.o CMakeFiles/PartDesignGui.dir/ViewProviderPyImp.cpp.o -Wl,-rpath,/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/PartDesign:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Sketcher:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/Mod/Part:/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/lib: -lmpi_cxx -lmpi ../../../../Mod/PartDesign/_PartDesign.so ../../../../Mod/Sketcher/SketcherGui.so ../../../../Mod/Part/PartGui.so /usr/lib64/libQt5Concurrent.so.5.15.2 ../../../../lib/libFreeCADGui.so -lCoin /usr/lib64/libQt5OpenGL.so.5.15.2 /usr/lib64/libQt5PrintSupport.so.5.15.2 /usr/lib64/libQt5Svg.so.5.15.2 /usr/lib64/libQt5Network.so.5.15.2 /usr/lib64/libQt5UiTools.a /usr/lib64/libQt5Widgets.so.5.15.2 /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64//libQt5Widgets.so /usr/lib64//libQt5Gui.so /usr/lib64//libQt5Core.so /usr/lib64/libGL.so /usr/lib64/libQt5X11Extras.so.5.15.2 /usr/lib64/libQt5Gui.so.5.15.2 /usr/lib64/libspnav.so /usr/lib64/libX11.so /usr/lib64/libshiboken2.cpython-38-aarch64-linux-gnu.so /usr/lib64/libpyside2.cpython-38-aarch64-linux-gnu.so ../../../../Mod/Sketcher/Sketcher.so ../../../../Mod/Part/Part.so /usr/lib64/libTKMesh.so.7.4.1 /usr/lib64/libTKIGES.so.7.4.1 /usr/lib64/libTKSTL.so.7.4.1 /usr/lib64/libTKBin.so.7.4.1 /usr/lib64/libTKCAF.so.7.4.1 /usr/lib64/libTKBinL.so.7.4.1 /usr/lib64/libTKLCAF.so.7.4.1 /usr/lib64/libTKCDF.so.7.4.1 /usr/lib64/libTKOffset.so.7.4.1 /usr/lib64/libTKFillet.so.7.4.1 /usr/lib64/libTKSTEP.so.7.4.1 /usr/lib64/libTKSTEP209.so.7.4.1 /usr/lib64/libTKSTEPAttr.so.7.4.1 /usr/lib64/libTKSTEPBase.so.7.4.1 /usr/lib64/libTKXSBase.so.7.4.1 /usr/lib64/libTKHLR.so.7.4.1 /usr/lib64/libTKFeat.so.7.4.1 /usr/lib64/libTKBool.so.7.4.1 /usr/lib64/libTKBO.so.7.4.1 /usr/lib64/libTKShHealing.so.7.4.1 /usr/lib64/libTKPrim.so.7.4.1 /usr/lib64/libTKTopAlgo.so.7.4.1 /usr/lib64/libTKGeomAlgo.so.7.4.1 /usr/lib64/libTKBRep.so.7.4.1 /usr/lib64/libTKGeomBase.so.7.4.1 /usr/lib64/libTKG3d.so.7.4.1 /usr/lib64/libTKG2d.so.7.4.1 /usr/lib64/libTKMath.so.7.4.1 /usr/lib64/libTKernel.so.7.4.1 -lrt -lstdc++ -ldl /usr/lib64/libtbb.so /usr/lib64/libtbbmalloc.so /usr/lib64/libfreetype.so ../../../../lib/libFreeCADApp.so ../../../../lib/libFreeCADBase.so -lmpi_cxx -lmpi /usr/lib64/libboost_filesystem.so.1.75.0 /usr/lib64/libboost_program_options.so.1.75.0 /usr/lib64/libboost_regex.so.1.75.0 -licudata -licui18n -licuuc /usr/lib64/libboost_system.so.1.75.0 /usr/lib64/libboost_thread.so.1.75.0 -lpthread /usr/lib64/libpython3.8.so /usr/lib64/libxerces-c.so -lpthread /usr/lib64/libz.so -lutil -ldl /usr/lib64/libQt5Xml.so.5.15.2 /usr/lib64/libQt5Core.so.5.15.2 gmake[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' [100%] Built target PartDesignGui gmake[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build' /usr/bin/cmake -E cmake_progress_start /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5/build/CMakeFiles 0 + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.QmdQmT + umask 022 + cd /home/iurt/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64 '!=' / ']' + rm -rf /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64 ++ dirname /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64 + mkdir -p /home/iurt/rpmbuild/BUILDROOT + mkdir /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64 + cd FreeCAD-0.18.5 + '[' 1 -eq 1 ']' + DESTDIR=/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64 + /usr/bin/cmake --install build -- Install configuration: "RelWithDebInfo" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Ext/PySide -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Ext/PySide/QtGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Ext/PySide/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Ext/PySide/QtCore.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Ext/PySide/QtSvg.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Ext/PySide/QtUiTools.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libSMDS.so -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libDriver.so -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libDriverSTL.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libDriverSTL.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libDriverDAT.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libDriverDAT.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libDriverUNV.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libDriverUNV.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libSMESHDS.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libSMESHDS.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libSMESH.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libSMESH.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libMEFISTO2.so -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libStdMeshers.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libStdMeshers.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libFreeCADBase.so -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libFreeCADApp.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libFreeCADApp.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/bin/FreeCAD -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/bin/FreeCAD" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/bin/FreeCADCmd -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/bin/FreeCADCmd" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/FreeCAD.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/FreeCAD.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/FreeCADGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/FreeCADGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Points/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Points/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Points.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Points.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/PointsGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/PointsGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Points/Resources/icons/PointsWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Complete/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Complete/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Complete/Resources/icons/CompleteWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/BaseTests.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/Document.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/Menu.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/TestApp.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/TestGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/UnicodeTests.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/UnitTests.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/Workbench.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/unittestgui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/testmakeWireString.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/TestPythonSyntax.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/QtUnitGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/QtUnitGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/qtunittest.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Test/Resources/icons/TestWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Image/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Image/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Image/ImageTools/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Image/ImageTools/_CommandImageScaling.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Image.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Image.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/ImageGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/ImageGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Image/Resources/icons/ImageWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Mesh/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Mesh/BuildRegularGeoms.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Mesh/MeshTestsApp.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Mesh/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Mesh.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Mesh.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/MeshGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/MeshGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Mesh/Resources/icons/MeshWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/JoinFeatures.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/MakeBottle.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/TestPartApp.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/TestPartGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/AttachmentEditor/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/AttachmentEditor/Commands.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/AttachmentEditor/FrozenClass.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/AttachmentEditor/TaskAttachmentEditor.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/AttachmentEditor/TaskAttachmentEditor.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/BasicShapes/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/BasicShapes/Shapes.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/BOPTools/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/BOPTools/GeneralFuseResult.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/BOPTools/JoinAPI.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/BOPTools/JoinFeatures.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/BOPTools/ShapeMerge.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/BOPTools/SplitAPI.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/BOPTools/SplitFeatures.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/BOPTools/Utils.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/CompoundTools/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/CompoundTools/_CommandCompoundFilter.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/CompoundTools/_CommandExplodeCompound.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/CompoundTools/CompoundFilter.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/CompoundTools/Explode.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Part.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Part.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/PartGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/PartGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Part/Resources/icons/PartWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Material/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Material/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Material/Material.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Material/importFCMat.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Material/MaterialEditor.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Material/materials-editor.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Material/MatPropDict.xml -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Material/Material_rc.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-3V45.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-E335.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-36NiCrMo16.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C15.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-1C22.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S460MC.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S235JR.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJS-800-1.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-17CrNiMo6.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S185.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJMW-350-4.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-X5CrNi18-10.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C50E.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-1C45.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-E335-GC.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/None.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S235JO.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJMB-350-10.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-1C60.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S340MC.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-28Mn6.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S460N.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-G200.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/CalculiX-Steel.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S500MC.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/AlMg3F24.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJS-600-3.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-3C22.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Concrete-Generic.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-X5CrNiMo17-12-2.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/AlZn4-5Mg1F35.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-G20Mn5.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJL-300.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-36CrNiMo4.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S420N.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-St-E-255.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-15CrNi6.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/PVC-Generic.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJMB-550-4.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S420MC.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJMW-400-5.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-X2CrNiMoN17-13-3.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Glass-E-GlassFibre.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-20NiCrMo2.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S275JO.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Glass-S2-GlassFibre.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Glass-Generic.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S335N.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-X39CrMo17-1.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJS-500-7.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJMW-450-7.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S335JO.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-1C35.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-X6CrNiTi18-10.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-G230.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJL-350.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJL-250.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Acrylic-Glass-Generic.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C40E.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S235JRG1.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-3C35.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-St-E-500.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-X3CrNiMo13-14.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-X2CrNiN24-4.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-30CrNiMo8.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S380MC.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-E360-GC.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/PTFE-Generic.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Wood-Generic.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-St-E-380.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-St-E-460.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C30E.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S275JR.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJMB-650-2.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-2C10.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/PP-Generic.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C55E.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/TEMPLATE.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/PLA-Generic.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Tools -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-G300.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-G16Mn5.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Aluminum-6061-T6.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJL-100.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-E360.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-G260.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/PA6-Generic.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-34CrNiMo6.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-E295-GC.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJL-150.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-G30Mn5.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-Generic.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/PET-Generic.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S275N.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C22E.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C10.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C25E.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S260NC.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-St-E-315.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-C60E.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJS-400-15.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJL-200.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S690MC.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S355J2G3.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-St-37-2K.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/AlMgSi1F31.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJS-700-2.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-3C15.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S335JR.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-EN-GJMW-360-12.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-E295.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/ABS-Generic.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/StandardMaterial/Steel-S550MC.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/FluidMaterial -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/FluidMaterial/None.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/FluidMaterial/Water.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Material/FluidMaterial/Air.FCMat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/TestPartDesignApp.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/TestPartDesignGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/InvoluteGearFeature.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/InvoluteGearFeature.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/Scripts/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/Scripts/DistanceBolt.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/Scripts/Epitrochoid.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/Scripts/FilletArc.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/Scripts/Gear.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/Scripts/Parallelepiped.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/Scripts/RadialCopy.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/Scripts/Spring.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestDatum.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestShapeBinder.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestPad.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestPocket.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestHole.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestRevolve.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestLoft.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestPipe.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestPrimitive.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestMirrored.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestLinearPattern.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestPolarPattern.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestMultiTransform.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestBoolean.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestFillet.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestChamfer.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestDraft.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestThickness.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/fcgear/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/fcgear/fcgear.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/fcgear/fcgeardialog.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/fcgear/involute.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/fcgear/svggear.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/WizardShaft/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/WizardShaft/WizardShaft.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/WizardShaft/WizardShaft.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/WizardShaft/WizardShaftTable.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/WizardShaft/Shaft.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/WizardShaft/ShaftFeature.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/WizardShaft/ShaftDiagram.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/WizardShaft/SegmentFunction.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/_PartDesign.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/_PartDesign.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/PartDesignGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/PartDesignGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/PartDesign/Resources/icons/PartDesignWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Raytracing/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Raytracing/RaytracingExample.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Raytracing/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Raytracing/Templates/LuxClassic.lxs -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Raytracing/Templates/LuxOutdoor.lxs -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Raytracing/Templates/ProjectStd.pov -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Raytracing/Templates/RadiosityNormal.pov -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Raytracing/Templates/RadiosityOutdoorHQ.pov -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Raytracing.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Raytracing.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/RaytracingGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/RaytracingGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Raytracing/Resources/icons/RaytracingWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Drawing/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Drawing/DrawingExample.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Drawing/DrawingTests.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Drawing/DrawingPatterns.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Drawing/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A1_Portrait_plain.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A1_Landscape_ISO7200.dxf -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A3_Portrait_plain.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A4_Landscape.dxf -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A0_Landscape_plain.dxf -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A3_Landscape.dxf -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A1_Landscape_plain.dxf -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A3_Landscape_plain.dxf -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A3_Landscape_ISO7200.dxf -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A2_Landscape_ISO7200.dxf -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A4_Landscape_ISO7200.dxf -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A2_Landscape_plain.dxf -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A2_Landscape_plain.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A0_Landscape_ISO7200.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A4_Portrait_ISO7200.dxf -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A3_Portrait_plain.dxf -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A4_Landscape.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A4_Portrait_ISO7200.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A0_Portrait_plain.dxf -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A2_Portrait_plain.dxf -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A1_Landscape_plain.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A4_Portrait_plain.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A0_Landscape_plain.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A4_Landscape_plain.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A4_Landscape_plain.dxf -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A2_Landscape_ISO7200.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A4_Landscape_ISO7200.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A3_Landscape_ISO7200.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A0_Landscape_ISO7200.dxf -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A3_Landscape_plain.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A2_Portrait_plain.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A1_Portrait_plain.dxf -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A3_Landscape.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A4_Portrait_plain.dxf -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A0_Portrait_plain.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Templates/A1_Landscape_ISO7200.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Drawing.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Drawing.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/DrawingGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/DrawingGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Drawing/Resources/icons/DrawingWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Sketcher/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Sketcher/SketcherExample.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Sketcher/TestSketcherApp.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Sketcher/Profiles.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Sketcher/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Sketcher/TestSketcherGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Sketcher/ProfileLib/Hexagon.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Sketcher/ProfileLib/RegularPolygon.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Sketcher/ProfileLib/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Sketcher.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Sketcher.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/SketcherGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/SketcherGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Sketcher/Resources/icons/SketcherWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Robot/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Robot/KukaExporter.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Robot/RobotExample.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Robot/RobotExampleTrajectoryOutOfShapes.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Robot/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Robot/MovieTool.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Robot/Lib -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Robot/Lib/Kuka -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Robot/Lib/Kuka/testprog.dat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Robot/Lib/Kuka/kr500_1.csv -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Robot/Lib/Kuka/kr500_1.wrl -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Robot/Lib/Kuka/kr210.WRL -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_16.csv -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Robot/Lib/Kuka/kr16.wrl -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_210_2.csv -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Robot/Lib/Kuka/kr_125.csv -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Robot/Lib/Kuka/testprog.src -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Robot/Lib/Kuka/kr125_3.wrl -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Robot.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Robot.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/RobotGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/RobotGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Robot/Resources/icons/RobotWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/ReverseEngineering/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/ReverseEngineering/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/ReverseEngineering.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/ReverseEngineering.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/ReverseEngineeringGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/ReverseEngineeringGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/ReverseEngineering/Resources/icons/ReverseEngineeringWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/MeshPart/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/MeshPart/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/MeshPart.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/MeshPart.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/MeshPartGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/MeshPartGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/MeshPart/MeshFlatteningCommand.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/Draft.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/DraftTools.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/DraftGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/DraftSnap.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/DraftTrackers.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/DraftVecUtils.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/DraftGeomUtils.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/WorkingPlane.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/getSVG.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/importDXF.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/importOCA.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/importSVG.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/importDWG.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/importAirfoilDAT.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/TestDraft.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/Draft_rc.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Draft/Resources/icons/DraftWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/DraftUtils.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/DraftUtils.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Web/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Web/TestWebGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Web/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Web.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Web.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/WebGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/WebGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Web/Resources/icons/WebWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Surface/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Surface/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Surface.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Surface.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/SurfaceGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/SurfaceGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Start/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Start/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Start.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Start.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/StartGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/StartGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Start/Resources/icons/StartWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Start/StartPage/StartPage.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Start/StartPage/TranslationTexts.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Start/StartPage/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Start/StartPage/LoadMRU.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Start/StartPage/LoadExample.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Start/StartPage/LoadNew.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Start/StartPage/LoadCustom.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Start/StartPage/StartPage.css -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Start/StartPage/StartPage.js -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Start/StartPage/StartPage.html -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Start/StartPage/EnableDownload.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Start/StartPage/images/userhub.png -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Start/StartPage/images/poweruserhub.png -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Start/StartPage/images/developerhub.png -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Start/StartPage/images/manual.png -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Start/StartPage/images/freecad.png -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Start/StartPage/images/installed.png -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Start/StartPage/images/new_file_thumbnail.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/0603_SMD.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/0805_SMD.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/1206_SMD.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/1210_SMD.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/1812_SMD.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/2225_SMD.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/2512_SMD.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/CAP_50SGV_8_10.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/EPL22_6_16.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/footprints_models.csv -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/I22_2_5_16.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/I22_2_5_16withEPL22_6_16.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/MSOP_10.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/RLF_12545.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/RLF_7030.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/SMB_DO_214AA.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/SMC_DO_214AB.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/SOD_323.igs -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/SOD_323.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/SOD_523.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/SOT23.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/SOT404.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/SOT428_DPAK.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/SOT_323_3.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/SOT_96.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/TCMT1107_4.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/TSM_103_01_L_DV_A.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/TSM_104_01_L_DV_A.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/TSS0P_8.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/VC0603_SMD.stp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/RLF_12545.igs -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/SOT23.igs -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idflibs/SOT404.igs -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idf.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Import/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Import/gzip_utf8.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Import/stepZ.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Import/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Import/DxfPlate -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Import/DxfPlate/entities12.rub -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Import/DxfPlate/tables212.rub -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Import/DxfPlate/classes14.rub -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Import/DxfPlate/entities0.rub -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Import/DxfPlate/blocks114.rub -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Import/DxfPlate/objects14.rub -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Import/DxfPlate/tables214.rub -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Import/DxfPlate/entities14.rub -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Import/DxfPlate/blocks10.rub -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Import/DxfPlate/blocks112.rub -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Import/DxfPlate/tables10.rub -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Import/DxfPlate/tables112.rub -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Import/DxfPlate/header14.rub -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Import/DxfPlate/header0.rub -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Import/DxfPlate/header12.rub -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Import/DxfPlate/tables114.rub -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Import/DxfPlate/tables20.rub -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Import.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Import.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/ImportGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/ImportGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Inspection/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Inspection/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Inspection.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Inspection.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/InspectionGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/InspectionGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Inspection/Resources/icons/InspectionWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchComponent.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchWall.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/importIFC.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/importIFClegacy.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/Arch.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchBuilding.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchFloor.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchSite.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchStructure.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchCommands.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchSectionPlane.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/importDAE.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/importOBJ.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchWindow.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchAxis.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchVRM.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchRoof.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchStairs.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/importWebGL.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/importJSON.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchSpace.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchRebar.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/TestArch.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchFrame.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchPanel.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchEquipment.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchCutPlane.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchMaterial.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchSchedule.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchProfile.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/import3DS.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchPrecast.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/importSH3D.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchPipe.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchNesting.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchBuildingPart.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchReference.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/Arch_rc.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/Dice3DS/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/Dice3DS/util.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/Dice3DS/dom3ds.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Arch/Presets -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Arch/Presets/pset_definitions.csv -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Arch/Presets/profiles.csv -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Arch/Resources/icons/ArchWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/ObjectsFem.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/TestFem.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femcommands/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femcommands/commands.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femcommands/manager.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/convert2TetGen.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/importCcxDatResults.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/importCcxFrdResults.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/importFenicsMesh.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/importInpMesh.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/importToolsFem.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/importVTKResults.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/importZ88Mesh.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/importZ88O2Results.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/readFenicsXDMF.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/readFenicsXML.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/writeFenicsXDMF.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/writeFenicsXML.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femmesh/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femmesh/femmesh2mesh.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femmesh/gmshtools.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femmesh/meshtools.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femresult/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femresult/resulttools.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/equationbase.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/report.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/reportdialog.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/run.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/settings.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/signal.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/solverbase.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/task.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/writerbase.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/calculix/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/calculix/solver.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/calculix/tasks.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/calculix/writer.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/sifio.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/solver.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/tasks.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/writer.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/equations/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/equations/electrostatic.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/equations/elasticity.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/equations/equation.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/equations/flow.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/equations/fluxsolver.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/equations/heat.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/equations/linear.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/equations/nonlinear.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/fenics/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/fenics/fenics_tools.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/z88/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/z88/solver.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/z88/tasks.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/z88/writer.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testccxtools.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testcommon.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testmesh.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testobject.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testresult.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testsolverframework.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/utilstest.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/cube_mesh.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/cube_frequency.inp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/cube_frequency.dat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/cube_frequency.frd -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/cube_frequency_expected_values -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/cube_frequency.FCStd -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/cube_static.inp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/cube_static.dat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/cube_static.frd -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/cube_static_expected_values -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/cube_static.FCStd -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/cube.FCStd -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/multimat.inp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/multimat_mesh.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/spine_mesh.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/spine_thermomech.inp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/spine_thermomech.dat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/spine_thermomech.frd -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/spine_thermomech_expected_values -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/spine_thermomech.FCStd -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/Flow1D_mesh.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech.inp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech.dat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech.frd -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech_expected_values -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech_inout_nodes.txt -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/Flow1D_thermomech.FCStd -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/elmer/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/elmer/case.sif -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/elmer/group_mesh.geo -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/elmer/ELMERSOLVER_STARTINFO -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/mesh/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.inp -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.unv -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.vtk -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/mesh/tetra10_mesh.z88 -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtools/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtools/ccxtools.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtools/femutils.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemConstraintBodyHeatSource.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemConstraintElectrostaticPotential.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemConstraintFlowVelocity.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemConstraintInitialFlowVelocity.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemConstraintSelfWeight.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemElementFluid1D.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemElementGeometry1D.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemElementGeometry2D.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemElementRotation1D.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemMaterial.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemMaterialMechanicalNonlinear.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemMeshBoundaryLayer.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemMeshGmsh.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemMeshGroup.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemMeshRegion.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemMeshResult.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemResultMechanical.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemSolverCalculix.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/FemConstraint.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_TaskPanelFemSolverControl.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemConstraintBodyHeatSource.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemConstraintElectrostaticPotential.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemConstraintFlowVelocity.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemConstraintInitialFlowVelocity.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemConstraintSelfWeight.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemElementFluid1D.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemElementGeometry1D.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemElementGeometry2D.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemElementRotation1D.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemMaterial.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemMaterialMechanicalNonlinear.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemMeshBoundaryLayer.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemMeshGmsh.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemMeshGroup.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemMeshRegion.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemMeshResult.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemResultMechanical.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemSolverCalculix.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/FemSelectionWidgets.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/ViewProviderFemConstraint.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Fem.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Fem.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Fem/Resources/icons/FemWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/Resources/ui/ElectrostaticPotential.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/Resources/ui/ElementFluid1D.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/Resources/ui/ElementGeometry1D.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/Resources/ui/ElementGeometry2D.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/Resources/ui/ElementRotation1D.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/Resources/ui/FlowVelocity.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/Resources/ui/InitialFlowVelocity.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/Resources/ui/Material.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/Resources/ui/MeshBoundaryLayer.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/Resources/ui/MeshGmsh.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/Resources/ui/MeshGroup.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/Resources/ui/MeshGroupXDMFExport.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/Resources/ui/MeshRegion.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/Resources/ui/ResultShow.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/Resources/ui/SolverCalculix.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/FemGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/FemGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/resources/examples/s60.fcstd -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/resources/examples/s60_katamaran.fcstd -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/resources/examples/wigley.fcstd -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/resources/examples/wigley_katamaran.fcstd -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipLoadExample/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipLoadExample/TaskPanel.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipLoadExample/TaskPanel.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateShip/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateShip/Preview.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateShip/TaskPanel.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateShip/TaskPanel.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateShip/Tools.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipOutlineDraw/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipOutlineDraw/Preview.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipOutlineDraw/TaskPanel.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipOutlineDraw/TaskPanel.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipAreasCurve/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipAreasCurve/PlotAux.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipAreasCurve/Preview.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipAreasCurve/TaskPanel.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipAreasCurve/TaskPanel.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipHydrostatics/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipHydrostatics/PlotAux.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipHydrostatics/TaskPanel.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipHydrostatics/TaskPanel.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipHydrostatics/Tools.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateWeight/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateWeight/TaskPanel.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateWeight/TaskPanel.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateWeight/Tools.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateTank/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateTank/TaskPanel.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateTank/TaskPanel.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateTank/Tools.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCapacityCurve/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCapacityCurve/PlotAux.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCapacityCurve/TaskPanel.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCapacityCurve/TaskPanel.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCapacityCurve/Tools.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateLoadCondition/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateLoadCondition/Tools.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipGZ/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipGZ/PlotAux.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipGZ/TaskPanel.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipGZ/TaskPanel.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipGZ/Tools.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipUtils/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipUtils/Locale.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipUtils/Math.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipUtils/Paths.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipUtils/Units.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/ShipGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/Instance.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/TankInstance.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/WeightInstance.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/Ship_rc.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Ship/resources/icons/ShipWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/OpenSCAD2Dgeom.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/OpenSCADFeatures.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/OpenSCADUtils.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/OpenSCADCommands.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/exportCSG.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/importCSG.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/tokrules.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/colorcodeshapes.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/expandplacements.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/replaceobj.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/OpenSCAD_rc.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/OpenSCAD/Resources/icons/OpenSCADWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotAxes/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotAxes/TaskPanel.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotAxes/TaskPanel.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotLabels/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotLabels/TaskPanel.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotLabels/TaskPanel.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotPositions/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotPositions/TaskPanel.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotPositions/TaskPanel.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotSave/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotSave/TaskPanel.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotSave/TaskPanel.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotSeries/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotSeries/TaskPanel.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotSeries/TaskPanel.ui -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotUtils/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotUtils/Paths.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/Plot.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/PlotGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/Plot_rc.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Plot/resources/icons/PlotWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Spreadsheet/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Spreadsheet/TestSpreadsheet.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Spreadsheet/importXLSX.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Spreadsheet/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Spreadsheet.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Spreadsheet.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/SpreadsheetGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/SpreadsheetGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Spreadsheet/Resources/icons/SpreadsheetWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathCommands.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/TestPathApp.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathCommands.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathAreaOp.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathArray.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathCircularHoleBase.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathCircularHoleBaseGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathComment.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathCopy.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathCustom.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDeburr.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDeburrGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDressup.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDressupAxisMap.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDressupDogbone.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDressupDragknife.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDressupHoldingTags.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDressupLeadInOut.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDressupRampEntry.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDressupTag.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDressupTagGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDressupTagPreferences.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDrilling.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDrillingGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathEngrave.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathEngraveBase.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathEngraveGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathFixture.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathGeom.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathGetPoint.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathGuiInit.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathHelix.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathHelixGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathHop.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathIconViewProvider.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathInspect.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathJob.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathJobCmd.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathJobDlg.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathJobGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathLog.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathMillFace.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathMillFaceGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathOp.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathOpGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathOpTools.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPocket.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPocketBase.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPocketBaseGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPocketGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPocketShape.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPocketShapeGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPost.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPostProcessor.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPreferences.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPreferencesPathDressup.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPreferencesPathJob.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathProfileBase.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathProfileBaseGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathProfileContour.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathProfileContourGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathProfileEdges.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathProfileEdgesGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathProfileFaces.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathProfileFacesGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathSanity.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathSelection.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathSetupSheet.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathSetupSheetGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathSetupSheetOpPrototype.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathSetupSheetOpPrototypeGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathSimpleCopy.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathStock.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathStop.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathSurface.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathSurfaceGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathToolController.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathToolEdit.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathToolLibraryManager.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathUtil.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathUtils.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathSimulatorGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PostUtils.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathAdaptiveGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathAdaptive.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/PathTestUtils.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathCore.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathDeburr.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathDepthParams.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathDressupDogbone.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathDressupHoldingTags.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathGeom.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathLog.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathOpTools.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathPost.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathSetupSheet.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathStock.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathTool.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathToolController.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathTooltable.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathUtil.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/boxtest.fcstd -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/test_centroid_00.ngc -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/test_geomop.fcstd -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/test_linuxcnc_00.ngc -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/centroid_post.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/comparams_post.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/dynapath_post.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/example_pre.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/grbl_post.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/grbl_G81_post.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/linuxcnc_post.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/opensbp_post.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/opensbp_pre.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/philips_post.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/rml_post.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/slic3r_pre.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/smoothie_post.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/Images/Ops/chamfer.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/Images/Tools/drill.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/Images/Tools/endmill.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/Images/Tools/v-bit.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Path.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Path.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libarea-native.so -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/area.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/area.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/PathSimulator.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/PathSimulator.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/PathGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/PathGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Path/Resources/icons/PathWorkbench.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Show/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Show/DepGraphTools.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Show/FrozenClass.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Show/TempoVis.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Show/Containers.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Measure/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Measure.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Measure.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/TestTechDrawApp.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/USLetter_Landscape_blank.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A1_Landscape_ISO7200TD.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A1_Landscape_blank.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A0_Landscape_ISO7200_Pep.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A0_Landscape_blank.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A4_Portrait_ISO7200Pep.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A3_Landscape_ISO7200_Pep.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A3_Landscape_EN_m52.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A1_Landscape_ISO7200_Pep.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A0_Landscape_ISO7200TD.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/HowToExample.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/ANSIB_Portrait.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A2_Landscape_ISO7200TD.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/ANSIB.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A3_Landscape_ISO7200TD.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A4_Portrait_ISO7200TD.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A4_Portrait_blank.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A4_Landscape_ISO7200_Pep.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A4_Landscape_blank.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A3_Landscape_blank.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/USLetter_Landscape.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A4_LandscapeTD.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A3_Landscape_IT_m52.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A4_Landscape_ISO7200TD.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A3_LandscapeTD.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A2_Landscape_ISO7200_Pep.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A2_Landscape_blank.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Templates/A3_Landscape_FR_m52.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/PAT -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/PAT/FCPAT.pat -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/LineGroup -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/LineGroup/LineGroup.csv -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Patterns -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Patterns/earth.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Patterns/wood.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Patterns/woodgrain.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Patterns/simple.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Patterns/hbone.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Patterns/diagonal1.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Patterns/plus.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Patterns/cross.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Patterns/square.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Patterns/diagonal2.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Patterns/line.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Patterns/concrete.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Patterns/brick01.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Patterns/steel.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Patterns/solid.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/TDTest/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/TDTest/DHatchTest.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/TDTest/DProjGroupTest.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/TDTest/DVAnnoSymImageTest.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/TDTest/DVDimensionTest.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/TDTest/DVPartTest.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/TDTest/DVSectionTest.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/TDTest/TestHatch.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/TDTest/TestImage.png -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/TDTest/TestSymbol.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/TDTest/TestTemplate.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/TechDraw.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/TechDraw.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Resources/icons/preferences-techdraw.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Resources/fonts/osifont-lgpl3fe.ttf -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/TechDraw/Resources/fonts/osifont.license -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/TechDrawGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/TechDrawGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/AddonManager/Init.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/AddonManager/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/AddonManager/AddonManager.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/AddonManager/AddonManagerGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/AddonManager/addonmanager_macro.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/AddonManager/addonmanager_utilities.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Tux/InitGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Tux/NavigationIndicatorGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Tux/PersistentToolbars.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Tux/PersistentToolbarsGui.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Tux/Tux_rc.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Ext/freecad/__init__.py -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/doc/freecad/ThirdPartyLibraries.html -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libFreeCADGui.so -- Set runtime path of "/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libFreeCADGui.so" to "/usr/lib64/freecad/lib" -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/freecad.xpm -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/freecad-icon-16.png -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/freecad-icon-32.png -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/freecad-icon-48.png -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/freecad-icon-64.png -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/freecad.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/freecad-doc.png -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/Dark-blue.qss -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/Dark-green.qss -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/Dark-orange.qss -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/Light-blue.qss -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/Light-green.qss -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/Light-orange.qss -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/Hmovetoolbar_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/Hmovetoolbar_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/Hsepartoolbar_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/Hsepartoolbar_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/Vmovetoolbar_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/Vsepartoolbar_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/Vsepartoolbar_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/background_freecad.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_closed_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_closed_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_open_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_end_open_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_closed_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_closed_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_open_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_more_open_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_vline_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/branch_vline_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/checkbox_indeterminate_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/checkbox_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/close_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/close_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_darker.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_disabled_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_disabled_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/down_arrow_lighter.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_darker.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_disabled_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_disabled_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/left_arrow_lighter.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/more_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/more_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/radiobutton_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_darker.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_disabled_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_disabled_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/right_arrow_lighter.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/sizegrip_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/sizegrip_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/splitter_horizontal_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/splitter_horizontal_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/splitter_vertical_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/splitter_vertical_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/transparent.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/undock_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/undock_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_darker.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_disabled_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_disabled_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/up-down_arrow_lighter.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_darker.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_disabled_dark.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_disabled_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_light.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Gui/Stylesheets/images_dark-light/up_arrow_lighter.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/share/metainfo/org.freecadweb.FreeCAD.appdata.xml -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/share/applications/org.freecadweb.FreeCAD.desktop -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/share/icons/hicolor/scalable/apps/org.freecadweb.FreeCAD.svg -- Installing: /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/share/mime/packages/org.freecadweb.FreeCAD.xml + mkdir -p /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/bin + cat + cat + chmod a+rx /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/bin/FreeCAD + chmod a+rx /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/bin/FreeCADCmd + mkdir -p /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share + mv /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/share/applications /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/share/icons /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/share/metainfo /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/share/mime /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share + install -pD -m 0644 /home/iurt/rpmbuild/SOURCES/freecad.1 /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/man/man1/freecad.1 + pushd /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/man/man1 ~/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/man/man1 ~/rpmbuild/BUILD/FreeCAD-0.18.5 + ln -sf freecad.1.gz FreeCAD.1.xz + ln -sf freecad.1.gz FreeCADCmd.1.xz + popd ~/rpmbuild/BUILD/FreeCAD-0.18.5 + rm -f /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/doc/freecad/Start_Page.html + rm -f /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/doc/freecad/ThirdPartyLibraries.html + /usr/lib/rpm/find-debuginfo.sh -j8 --strict-build-id -m -i --build-id-seed 0.18.5-4.mga8 --unique-debug-suffix -0.18.5-4.mga8.aarch64 --unique-debug-src-base freecad-0.18.5-4.mga8.aarch64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /home/iurt/rpmbuild/BUILD/FreeCAD-0.18.5 explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Fem.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/DrawingGui.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/bin/FreeCAD explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/DraftUtils.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/bin/FreeCADCmd explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Drawing.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/DraftUtils.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/FemGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/DrawingGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/bin/FreeCAD extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Fem.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/bin/FreeCADCmd extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/FemGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Drawing.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/FreeCAD.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/FreeCAD.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Image.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/FreeCADGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Image.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/ImageGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/FreeCADGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/ImageGui.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Import.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Import.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/ImportGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/ImportGui.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Inspection.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Inspection.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/InspectionGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/InspectionGui.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Measure.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Measure.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Mesh.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Mesh.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/MeshGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/MeshGui.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/MeshPart.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/MeshPart.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/MeshPartGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/MeshPartGui.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Part.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Part.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/PartDesignGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/PartDesignGui.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/PartGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/PartGui.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Path.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Path.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/PathGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/PathGui.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/PathSimulator.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/PathSimulator.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Points.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Points.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/PointsGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/PointsGui.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/QtUnitGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/QtUnitGui.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Raytracing.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Raytracing.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/RaytracingGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/RaytracingGui.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/ReverseEngineering.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/ReverseEngineering.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/ReverseEngineeringGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/ReverseEngineeringGui.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Robot.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Robot.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/RobotGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/RobotGui.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Sketcher.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Sketcher.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/SketcherGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/SketcherGui.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Spreadsheet.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Spreadsheet.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/SpreadsheetGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/SpreadsheetGui.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Start.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Start.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/StartGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/StartGui.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Surface.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Surface.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/SurfaceGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/SurfaceGui.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/TechDraw.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/TechDraw.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/TechDrawGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/TechDrawGui.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Web.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/Web.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/WebGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/WebGui.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/_PartDesign.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/_PartDesign.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/area.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libDriver.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/area.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libDriver.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libDriverDAT.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libDriverDAT.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libDriverSTL.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libDriverSTL.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libDriverUNV.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libDriverUNV.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libFreeCADApp.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libFreeCADApp.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libFreeCADBase.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libFreeCADBase.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libFreeCADGui.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libFreeCADGui.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libMEFISTO2.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libSMDS.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libSMDS.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libMEFISTO2.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libSMESH.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libSMESH.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libSMESHDS.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libSMESHDS.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libStdMeshers.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libStdMeshers.so explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libarea-native.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/lib/libarea-native.so dwz: dwz.c:9310: write_die: Assertion `value && refdcu->cu_kind != CU_ALT' failed. /usr/lib/rpm/find-debuginfo.sh: line 548: 30963 Aborted (core dumped) dwz $dwz_opts ${dwz_files[@]} original debug info size: 1261732kB, size after compression: 1120416kB /usr/lib/rpm/sepdebugcrcfix: Updated 40 CRC32s, 22 CRC32s did match. cpio: build/src/App/ExpressionParser.tab.c: Cannot stat: No such file or directory cpio: build/src/App/ExpressionParser.y: Cannot stat: No such file or directory cpio: build/src/App/lex.ExpressionParser.c: Cannot stat: No such file or directory cpio: build/src/Base/QuantityLexer.c: Cannot stat: No such file or directory cpio: build/src/Base/QuantityParser.c: Cannot stat: No such file or directory cpio: build/src/Base/QuantityParser.y: Cannot stat: No such file or directory cpio: build/src/Gui/SelectionFilter.l: Cannot stat: No such file or directory cpio: build/src/Gui/SelectionFilter.tab.c: Cannot stat: No such file or directory cpio: build/src/Gui/SelectionFilter.y: Cannot stat: No such file or directory cpio: build/src/Gui/lex.SelectionFilter.c: Cannot stat: No such file or directory 225032 blocks + /usr/lib/rpm/check-buildroot + '[' -n '' ']' + /usr/share/spec-helper/clean_files + '[' -n '' ']' + /usr/share/spec-helper/compress_files .xz + '[' -n '' ']' + /usr/share/spec-helper/relink_symlinks + '[' -n '' ']' + /usr/share/spec-helper/clean_perl + '[' -n '' ']' + /usr/share/spec-helper/lib_symlinks + '[' -n '' ']' + /usr/share/spec-helper/gprintify + '[' -n '' ']' + /usr/share/spec-helper/fix_mo + '[' -n '' ']' + /usr/share/spec-helper/fix_pamd + '[' -n '' ']' + /usr/share/spec-helper/remove_info_dir + '[' -n '' ']' + /usr/share/spec-helper/fix_eol + '[' -n '' ']' + /usr/share/spec-helper/check_desktop_files /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/applications/org.freecadweb.FreeCAD.desktop: hint: value "Graphics;Science;Education;Engineering;" for key "Categories" in group "Desktop Entry" contains more than one main category; application might appear more than once in the application menu /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/applications/org.freecadweb.FreeCAD.desktop: hint: value "Graphics;Science;Education;Engineering;" for key "Categories" in group "Desktop Entry" contains more than one main category; application might appear more than once in the application menu + '[' -n '' ']' + /usr/share/spec-helper/check_elf_files Warning: unused libraries in /usr/lib64/freecad/lib/PathSimulator.so: Part.so Mesh.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/Drawing.so: Spreadsheet.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/Image.so: libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/libDriverDAT.so: libDriver.so Warning: unused libraries in /usr/lib64/freecad/lib/libDriverUNV.so: libDriver.so Warning: unused libraries in /usr/lib64/freecad/lib/libStdMeshers.so: libMEFISTO2.so libDriverSTL.so libSMESHDS.so libSMDS.so Warning: unused libraries in /usr/lib64/freecad/lib/libFreeCADGui.so: libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/Fem.so: libFreeCADApp.so libStdMeshers.so libSMESH.so libFreeCADBase.so libSMESHDS.so libSMDS.so Warning: unused libraries in /usr/lib64/freecad/lib/RaytracingGui.so: libFreeCADGui.so Part.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/Inspection.so: Points.so Part.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/SurfaceGui.so: libFreeCADGui.so Part.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/SpreadsheetGui.so: libFreeCADGui.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/ReverseEngineering.so: Mesh.so Points.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/DrawingGui.so: libFreeCADGui.so Part.so Spreadsheet.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/PartDesignGui.so: PartGui.so libFreeCADGui.so Sketcher.so Part.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/Points.so: libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/Spreadsheet.so: libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/libSMESH.so: libDriverDAT.so libDriverUNV.so libSMESHDS.so libSMDS.so libDriver.so Warning: unused libraries in /usr/lib64/freecad/lib/WebGui.so: libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/MeshPartGui.so: MeshGui.so libFreeCADGui.so Part.so Mesh.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/FreeCADGui.so: libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/PathGui.so: PartGui.so libFreeCADGui.so Part.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/TechDraw.so: Drawing.so Import.so Spreadsheet.so Part.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/SketcherGui.so: PartGui.so libFreeCADGui.so Part.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/DraftUtils.so: libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/_PartDesign.so: libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/libDriverSTL.so: libSMDS.so Warning: unused libraries in /usr/lib64/freecad/lib/InspectionGui.so: libFreeCADGui.so Points.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/StartGui.so: libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/PointsGui.so: libFreeCADGui.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/Path.so: libarea-native.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/MeshGui.so: libFreeCADGui.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/Sketcher.so: libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/FemGui.so: libFreeCADGui.so Part.so libSMESH.so libSMDS.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/Raytracing.so: libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/ImageGui.so: libFreeCADGui.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/ImportGui.so: Import.so libFreeCADGui.so Part.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/TechDrawGui.so: libFreeCADGui.so Spreadsheet.so Part.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/Import.so: libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/PartGui.so: libFreeCADGui.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/Part.so: libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/Surface.so: libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/Mesh.so: libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/Robot.so: libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/MeshPart.so: Mesh.so libStdMeshers.so libSMESH.so libFreeCADBase.so libSMDS.so Warning: unused libraries in /usr/lib64/freecad/lib/ReverseEngineeringGui.so: Mesh.so Points.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/FreeCAD.so: libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/QtUnitGui.so: libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/RobotGui.so: libFreeCADGui.so Part.so libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/lib/Measure.so: libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/bin/FreeCAD: libFreeCADApp.so libFreeCADBase.so Warning: unused libraries in /usr/lib64/freecad/bin/FreeCADCmd: libFreeCADBase.so + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python3 1 1 /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Ext/PySide/QtGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Ext/PySide/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Ext/PySide/QtCore.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Ext/PySide/QtSvg.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Ext/PySide/QtUiTools.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Ext/freecad/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/importOCA.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/DraftGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/getSVG.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/importSVG.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/WorkingPlane.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/importDWG.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/DraftGeomUtils.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/DraftSnap.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/Draft_rc.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/Draft.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/importAirfoilDAT.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/importDXF.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/DraftTools.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/DraftVecUtils.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/TestDraft.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Draft/DraftTrackers.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Import/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Import/gzip_utf8.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Import/stepZ.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Import/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/OpenSCADUtils.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/colorcodeshapes.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/replaceobj.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/expandplacements.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/tokrules.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/importCSG.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/OpenSCAD2Dgeom.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/OpenSCADCommands.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/OpenSCADFeatures.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/exportCSG.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/OpenSCAD/OpenSCAD_rc.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Image/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Image/ImageTools/_CommandImageScaling.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Image/ImageTools/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Image/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/ReverseEngineering/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/ReverseEngineering/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Raytracing/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Raytracing/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Raytracing/RaytracingExample.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestPad.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestBoolean.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestPipe.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestShapeBinder.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestHole.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestThickness.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestFillet.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestMultiTransform.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestDatum.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestPocket.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestLinearPattern.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestRevolve.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestMirrored.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestLoft.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestPolarPattern.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestDraft.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestChamfer.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestPrimitive.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/TestPartDesignGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/WizardShaft/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/WizardShaft/Shaft.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/WizardShaft/ShaftDiagram.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/WizardShaft/SegmentFunction.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/WizardShaft/WizardShaftTable.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/WizardShaft/ShaftFeature.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/WizardShaft/WizardShaft.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/TestPartDesignApp.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/InvoluteGearFeature.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/fcgear/fcgeardialog.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/fcgear/svggear.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/fcgear/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/fcgear/fcgear.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/fcgear/involute.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/Scripts/Parallelepiped.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/Scripts/RadialCopy.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/Scripts/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/Scripts/DistanceBolt.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/Scripts/Spring.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/Scripts/FilletArc.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/Scripts/Gear.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/PartDesign/Scripts/Epitrochoid.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Idf.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Idf/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femcommands/manager.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femcommands/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femcommands/commands.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_TaskPanelFemSolverControl.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemElementRotation1D.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemConstraintElectrostaticPotential.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/FemSelectionWidgets.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/ViewProviderFemConstraint.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemSolverCalculix.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemMaterialMechanicalNonlinear.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemElementFluid1D.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemMeshRegion.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemConstraintInitialFlowVelocity.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemMeshGroup.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemMeshGmsh.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemMaterial.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemConstraintFlowVelocity.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemMeshResult.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemResultMechanical.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemElementGeometry1D.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemMeshBoundaryLayer.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemConstraintSelfWeight.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemConstraintBodyHeatSource.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femguiobjects/_ViewProviderFemElementGeometry2D.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femmesh/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femmesh/meshtools.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femmesh/gmshtools.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femmesh/femmesh2mesh.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/signal.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/settings.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/report.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/equationbase.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/run.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/equations/electrostatic.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/equations/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/equations/fluxsolver.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/equations/equation.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/equations/heat.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/equations/linear.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/equations/elasticity.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/equations/nonlinear.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/equations/flow.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/sifio.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/tasks.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/solver.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/elmer/writer.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/z88/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/z88/tasks.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/z88/solver.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/z88/writer.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/fenics/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/fenics/fenics_tools.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/solverbase.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/reportdialog.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/writerbase.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/calculix/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/calculix/tasks.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/calculix/solver.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/calculix/writer.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femsolver/task.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/TestFem.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/writeFenicsXDMF.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/importFenicsMesh.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/convert2TetGen.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/importZ88Mesh.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/writeFenicsXML.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/importToolsFem.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/importZ88O2Results.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/importVTKResults.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/importCcxFrdResults.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/readFenicsXML.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/readFenicsXDMF.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/importCcxDatResults.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/feminout/importInpMesh.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemElementFluid1D.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemConstraintInitialFlowVelocity.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemMeshGroup.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemMeshBoundaryLayer.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemMeshResult.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemConstraintElectrostaticPotential.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/FemConstraint.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemElementRotation1D.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemMeshGmsh.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemConstraintFlowVelocity.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemMaterialMechanicalNonlinear.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemMeshRegion.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemSolverCalculix.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemElementGeometry1D.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemElementGeometry2D.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemConstraintSelfWeight.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemConstraintBodyHeatSource.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemMaterial.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femobjects/_FemResultMechanical.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testsolverframework.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/elmer/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/Flow1D_mesh.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/multimat_mesh.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/spine_mesh.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/ccx/cube_mesh.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testfiles/mesh/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testmesh.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testresult.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testcommon.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testobject.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/utilstest.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtest/testccxtools.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/ObjectsFem.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtools/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtools/ccxtools.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femtools/femutils.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femresult/resulttools.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Fem/femresult/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Robot/KukaExporter.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Robot/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Robot/MovieTool.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Robot/RobotExample.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Robot/RobotExampleTrajectoryOutOfShapes.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Robot/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/BOPTools/GeneralFuseResult.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/BOPTools/SplitFeatures.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/BOPTools/ShapeMerge.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/BOPTools/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/BOPTools/JoinFeatures.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/BOPTools/JoinAPI.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/BOPTools/Utils.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/BOPTools/SplitAPI.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/BasicShapes/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/BasicShapes/Shapes.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/JoinFeatures.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/AttachmentEditor/Commands.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/AttachmentEditor/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/AttachmentEditor/FrozenClass.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/AttachmentEditor/TaskAttachmentEditor.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/TestPartApp.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/MakeBottle.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/TestPartGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/CompoundTools/_CommandCompoundFilter.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/CompoundTools/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/CompoundTools/Explode.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/CompoundTools/_CommandExplodeCompound.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Part/CompoundTools/CompoundFilter.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/TestPathApp.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathOpTools.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathUtil.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathDepthParams.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathSetupSheet.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathLog.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathGeom.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathToolController.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathPost.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathDressupDogbone.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathStock.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathDeburr.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathTool.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathDressupHoldingTags.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/PathTestUtils.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathCore.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathTests/TestPathTooltable.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathCommands.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPocket.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDeburr.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathInspect.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDressupTagGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathFixture.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathOp.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathToolEdit.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathSimpleCopy.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathToolLibraryManager.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathHelixGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/example_pre.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/slic3r_pre.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/grbl_G81_post.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/rml_post.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/smoothie_post.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/grbl_post.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/philips_post.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/centroid_post.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/opensbp_pre.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/dynapath_post.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/comparams_post.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/opensbp_post.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/post/linuxcnc_post.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathSetupSheetGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathSimulatorGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathProfileContourGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDrillingGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDressup.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPreferencesPathJob.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathProfileFaces.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPocketShape.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathOpTools.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDressupLeadInOut.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathStop.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDressupDragknife.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathGuiInit.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathAdaptive.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathMillFaceGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathStock.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathProfileBaseGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathIconViewProvider.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathSurface.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDressupTag.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathProfileFacesGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathGeom.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPocketBase.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathSurfaceGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathSetupSheetOpPrototypeGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPreferencesPathDressup.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PostUtils.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathCommands.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathAreaOp.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathEngrave.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathSetupSheet.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathCustom.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathLog.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDressupAxisMap.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathJob.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDrilling.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathProfileEdgesGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPreferences.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDressupDogbone.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathAdaptiveGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPocketShapeGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathHop.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathCircularHoleBase.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathComment.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathOpGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPocketGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathEngraveBase.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathJobCmd.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathUtil.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathSelection.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathGetPoint.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathJobGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPocketBaseGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDressupRampEntry.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathUtils.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathSanity.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathHelix.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathToolController.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathCircularHoleBaseGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathProfileContour.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPostProcessor.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathEngraveGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathCopy.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathArray.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDeburrGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathJobDlg.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathPost.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathProfileBase.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathProfileEdges.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDressupTagPreferences.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathSetupSheetOpPrototype.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathMillFace.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Path/PathScripts/PathDressupHoldingTags.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Surface/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Surface/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Show/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Show/TempoVis.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Show/FrozenClass.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Show/DepGraphTools.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Show/Containers.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Inspection/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Inspection/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/TestApp.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/UnicodeTests.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/qtunittest.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/BaseTests.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/TestPythonSyntax.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/TestGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/Workbench.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/unittestgui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/UnitTests.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/testmakeWireString.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/Menu.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Test/Document.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Measure/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/TestTechDrawApp.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/TDTest/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/TDTest/DProjGroupTest.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/TDTest/DVSectionTest.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/TDTest/DHatchTest.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/TDTest/DVDimensionTest.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/TDTest/DVAnnoSymImageTest.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/TechDraw/TDTest/DVPartTest.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Mesh/MeshTestsApp.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Mesh/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Mesh/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Mesh/BuildRegularGeoms.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/AddonManager/addonmanager_macro.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/AddonManager/AddonManagerGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/AddonManager/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/AddonManager/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/AddonManager/AddonManager.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/AddonManager/addonmanager_utilities.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Points/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Points/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/MeshPart/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/MeshPart/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/MeshPart/MeshFlatteningCommand.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Web/TestWebGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Web/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Web/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Tux/NavigationIndicatorGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Tux/PersistentToolbarsGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Tux/Tux_rc.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Tux/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Tux/PersistentToolbars.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Drawing/DrawingExample.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Drawing/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Drawing/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Drawing/DrawingPatterns.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Drawing/DrawingTests.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Complete/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Complete/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Material/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Material/Material.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Material/Material_rc.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Material/importFCMat.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Material/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Material/MaterialEditor.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Start/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Start/StartPage/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Start/StartPage/StartPage.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Start/StartPage/TranslationTexts.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Start/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Sketcher/ProfileLib/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Sketcher/ProfileLib/Hexagon.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Sketcher/ProfileLib/RegularPolygon.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Sketcher/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Sketcher/Profiles.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Sketcher/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Sketcher/SketcherExample.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Sketcher/TestSketcherGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Sketcher/TestSketcherApp.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotAxes/TaskPanel.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotAxes/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/Plot.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotLabels/TaskPanel.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotLabels/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotSeries/TaskPanel.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotSeries/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotPositions/TaskPanel.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotPositions/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotSave/TaskPanel.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotSave/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotUtils/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/plotUtils/Paths.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/PlotGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Plot/Plot_rc.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/Instance.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCapacityCurve/Tools.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCapacityCurve/TaskPanel.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCapacityCurve/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCapacityCurve/PlotAux.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/WeightInstance.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipLoadExample/TaskPanel.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipLoadExample/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateWeight/Tools.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateWeight/TaskPanel.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateWeight/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/ShipGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/TankInstance.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateTank/Tools.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateTank/TaskPanel.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateTank/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/Ship_rc.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipUtils/Locale.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipUtils/Units.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipUtils/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipUtils/Math.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipUtils/Paths.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipOutlineDraw/Preview.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipOutlineDraw/TaskPanel.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipOutlineDraw/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipGZ/Tools.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipGZ/TaskPanel.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipGZ/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipGZ/PlotAux.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateLoadCondition/Tools.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateLoadCondition/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipHydrostatics/Tools.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipHydrostatics/TaskPanel.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipHydrostatics/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipHydrostatics/PlotAux.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateShip/Tools.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateShip/Preview.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateShip/TaskPanel.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipCreateShip/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipAreasCurve/Preview.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipAreasCurve/TaskPanel.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipAreasCurve/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Ship/shipAreasCurve/PlotAux.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Spreadsheet/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Spreadsheet/TestSpreadsheet.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Spreadsheet/importXLSX.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Spreadsheet/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchPipe.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchWall.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/import3DS.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchRebar.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchMaterial.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchPanel.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchVRM.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/Arch_rc.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/InitGui.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchSectionPlane.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchStructure.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchComponent.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchStairs.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchSpace.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchBuildingPart.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchProfile.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/Init.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/importIFC.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchCommands.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/importWebGL.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/Dice3DS/__init__.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/Dice3DS/dom3ds.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/Dice3DS/util.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/importJSON.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchEquipment.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/Arch.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/importSH3D.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/importDAE.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/importIFClegacy.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchAxis.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchRoof.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchSite.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchSchedule.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/TestArch.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchWindow.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchFloor.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchBuilding.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchFrame.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchNesting.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchReference.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchCutPlane.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/importOBJ.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/lib64/freecad/Mod/Arch/ArchPrecast.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Start/StartPage/LoadMRU.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Start/StartPage/EnableDownload.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Start/StartPage/LoadNew.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Start/StartPage/LoadExample.py /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/freecad/Mod/Start/StartPage/LoadCustom.py /usr/lib64/freecad/Mod/Fem/feminout/importFenicsMesh.py:157: SyntaxWarning: "is not" with a literal. Did you mean "!="? /usr/lib64/freecad/Mod/Fem/feminout/writeFenicsXDMF.py:261: SyntaxWarning: "is not" with a literal. Did you mean "!="? /usr/lib64/freecad/Mod/PartDesign/WizardShaft/Shaft.py:91: SyntaxWarning: "is not" with a literal. Did you mean "!="? /usr/lib64/freecad/Mod/Fem/feminout/importFenicsMesh.py:157: SyntaxWarning: "is not" with a literal. Did you mean "!="? /usr/lib64/freecad/Mod/Fem/feminout/writeFenicsXDMF.py:261: SyntaxWarning: "is not" with a literal. Did you mean "!="? /usr/lib64/freecad/Mod/PartDesign/WizardShaft/Shaft.py:91: SyntaxWarning: "is not" with a literal. Did you mean "!="? + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/redhat/brp-mangle-shebangs mangling shebang in /usr/bin/FreeCAD from /bin/bash to #!/usr/bin/bash mangling shebang in /usr/bin/FreeCADCmd from /bin/bash to #!/usr/bin/bash *** WARNING: ./usr/src/debug/freecad-0.18.5-4.mga8.aarch64/src/Mod/Fem/App/HypothesisPy.h is executable but has no shebang, removing executable bit *** WARNING: ./usr/src/debug/freecad-0.18.5-4.mga8.aarch64/src/Mod/Fem/App/HypothesisPy.cpp is executable but has no shebang, removing executable bit *** WARNING: ./usr/src/debug/freecad-0.18.5-4.mga8.aarch64/src/Mod/Fem/Gui/Workbench.cpp is executable but has no shebang, removing executable bit *** WARNING: ./usr/src/debug/freecad-0.18.5-4.mga8.aarch64/src/Mod/Fem/Gui/Workbench.h is executable but has no shebang, removing executable bit *** WARNING: ./usr/src/debug/freecad-0.18.5-4.mga8.aarch64/src/Mod/Fem/Gui/AppFemGuiPy.cpp is executable but has no shebang, removing executable bit Processing files: freecad-0.18.5-4.mga8.aarch64 Executing(%doc): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.1kcHSR + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd FreeCAD-0.18.5 + DOCDIR=/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/doc/freecad + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/doc/freecad + cp -pr ChangeLog.txt /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/doc/freecad + cp -pr README.md /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/doc/freecad + RPM_EC=0 ++ jobs -p + exit 0 Executing(%license): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.s4gZiS + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd FreeCAD-0.18.5 + LICENSEDIR=/home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/licenses/freecad + export LC_ALL=C + LC_ALL=C + export LICENSEDIR + /usr/bin/mkdir -p /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/licenses/freecad + cp -pr data/License.txt /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/licenses/freecad + cp -pr src/Doc/ThirdPartyLibraries.html /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64/usr/share/licenses/freecad + RPM_EC=0 ++ jobs -p + exit 0 Provides: application() application(org.freecadweb.FreeCAD.desktop) freecad = 0.18.5-4.mga8 freecad(aarch-64) = 0.18.5-4.mga8 libDriver.so()(64bit) libDriverDAT.so()(64bit) libDriverSTL.so()(64bit) libDriverUNV.so()(64bit) libFreeCADApp.so()(64bit) libFreeCADBase.so()(64bit) libFreeCADGui.so()(64bit) libMEFISTO2.so()(64bit) libSMDS.so()(64bit) libSMESH.so()(64bit) libSMESHDS.so()(64bit) libStdMeshers.so()(64bit) libarea-native.so()(64bit) metainfo() metainfo(org.freecadweb.FreeCAD.appdata.xml) mimehandler(application/x-extension-fcstd) Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libCoin.so.80()(64bit) libDriver.so()(64bit) libDriverDAT.so()(64bit) libDriverSTL.so()(64bit) libDriverUNV.so()(64bit) libFreeCADApp.so()(64bit) libFreeCADBase.so()(64bit) libFreeCADGui.so()(64bit) libGL.so.1()(64bit) libGLU.so.1()(64bit) libMEFISTO2.so()(64bit) libQt5Concurrent.so.5()(64bit) libQt5Concurrent.so.5(Qt_5)(64bit) libQt5Core.so.5()(64bit) libQt5Core.so.5(Qt_5)(64bit) libQt5Gui.so.5()(64bit) libQt5Gui.so.5(Qt_5)(64bit) libQt5Network.so.5()(64bit) libQt5Network.so.5(Qt_5)(64bit) libQt5OpenGL.so.5()(64bit) libQt5OpenGL.so.5(Qt_5)(64bit) libQt5PrintSupport.so.5()(64bit) libQt5PrintSupport.so.5(Qt_5)(64bit) libQt5Svg.so.5()(64bit) libQt5Svg.so.5(Qt_5)(64bit) libQt5WebKit.so.5()(64bit) libQt5WebKit.so.5(Qt_5)(64bit) libQt5WebKitWidgets.so.5()(64bit) libQt5WebKitWidgets.so.5(Qt_5)(64bit) libQt5Widgets.so.5()(64bit) libQt5Widgets.so.5(Qt_5)(64bit) libQt5X11Extras.so.5()(64bit) libQt5X11Extras.so.5(Qt_5)(64bit) libQt5Xml.so.5()(64bit) libQt5Xml.so.5(Qt_5)(64bit) libSMDS.so()(64bit) libSMESH.so()(64bit) libSMESHDS.so()(64bit) libStdMeshers.so()(64bit) libTKBO.so.7()(64bit) libTKBRep.so.7()(64bit) libTKBool.so.7()(64bit) libTKCAF.so.7()(64bit) libTKCDF.so.7()(64bit) libTKFeat.so.7()(64bit) libTKFillet.so.7()(64bit) libTKG2d.so.7()(64bit) libTKG3d.so.7()(64bit) libTKGeomAlgo.so.7()(64bit) libTKGeomBase.so.7()(64bit) libTKHLR.so.7()(64bit) libTKIGES.so.7()(64bit) libTKLCAF.so.7()(64bit) libTKMath.so.7()(64bit) libTKMesh.so.7()(64bit) libTKMeshVS.so.7()(64bit) libTKOffset.so.7()(64bit) libTKPrim.so.7()(64bit) libTKSTEP.so.7()(64bit) libTKSTL.so.7()(64bit) libTKShHealing.so.7()(64bit) libTKTopAlgo.so.7()(64bit) libTKXCAF.so.7()(64bit) libTKXDEIGES.so.7()(64bit) libTKXDESTEP.so.7()(64bit) libTKXSBase.so.7()(64bit) libTKernel.so.7()(64bit) libarea-native.so()(64bit) libboost_filesystem.so.1.75.0()(64bit) libboost_program_options.so.1.75.0()(64bit) libboost_python38.so.1.75.0()(64bit) libboost_regex.so.1.75.0()(64bit) libboost_thread.so.1.75.0()(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libdl.so.2()(64bit) libdl.so.2(GLIBC_2.17)(64bit) libfreetype.so.6()(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libm.so.6()(64bit) libm.so.6(GLIBC_2.17)(64bit) libm.so.6(GLIBC_2.27)(64bit) libm.so.6(GLIBC_2.29)(64bit) libmedC.so.11.0.0()(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.17)(64bit) libpyside2.cpython-38-aarch64-linux-gnu.so.5.15()(64bit) libpython3.8.so.1.0()(64bit) libshiboken2.cpython-38-aarch64-linux-gnu.so.5.15()(64bit) libspnav.so.0()(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(CXXABI_1.3.5)(64bit) libstdc++.so.6(CXXABI_1.3.8)(64bit) libstdc++.so.6(CXXABI_1.3.9)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) libstdc++.so.6(GLIBCXX_3.4.11)(64bit) libstdc++.so.6(GLIBCXX_3.4.14)(64bit) libstdc++.so.6(GLIBCXX_3.4.15)(64bit) libstdc++.so.6(GLIBCXX_3.4.18)(64bit) libstdc++.so.6(GLIBCXX_3.4.19)(64bit) libstdc++.so.6(GLIBCXX_3.4.20)(64bit) libstdc++.so.6(GLIBCXX_3.4.21)(64bit) libstdc++.so.6(GLIBCXX_3.4.26)(64bit) libstdc++.so.6(GLIBCXX_3.4.5)(64bit) libstdc++.so.6(GLIBCXX_3.4.9)(64bit) libtbb.so.2()(64bit) libvtkCommonCore-8.2.so.1()(64bit) libvtkCommonDataModel-8.2.so.1()(64bit) libvtkCommonExecutionModel-8.2.so.1()(64bit) libvtkFiltersCore-8.2.so.1()(64bit) libvtkFiltersExtraction-8.2.so.1()(64bit) libvtkFiltersGeneral-8.2.so.1()(64bit) libvtkFiltersGeometry-8.2.so.1()(64bit) libvtkFiltersParallelDIY2-8.2.so.1()(64bit) libvtkFiltersSources-8.2.so.1()(64bit) libvtkFiltersVerdict-8.2.so.1()(64bit) libvtkIOCore-8.2.so.1()(64bit) libvtkIOLegacy-8.2.so.1()(64bit) libvtkIOXML-8.2.so.1()(64bit) libvtkInteractionStyle-8.2.so.1()(64bit) libvtkRenderingFreeType-8.2.so.1()(64bit) libvtkRenderingOpenGL2-8.2.so.1()(64bit) libxerces-c-3.2.so()(64bit) libz.so.1()(64bit) Processing files: freecad-data-0.18.5-4.mga8.noarch Provides: freecad-data = 0.18.5-4.mga8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: freecad-debugsource-0.18.5-4.mga8.aarch64 Provides: freecad-debugsource = 0.18.5-4.mga8 freecad-debugsource(aarch-64) = 0.18.5-4.mga8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: freecad-debuginfo-0.18.5-4.mga8.aarch64 Provides: debuginfo(build-id) = 053d0810ff22cfaba41d4e1af2319f4407480d91 debuginfo(build-id) = 09eedb8c1197a772ec365502074d9855850c9e8f debuginfo(build-id) = 0a898e792e9e9faa27a3f4ffac1b6c2aa9c68a3d debuginfo(build-id) = 119659591bede2c92575b20297ff548ce4cb4f96 debuginfo(build-id) = 121533967bbd476283751a7c718c0fd057b65622 debuginfo(build-id) = 16cc2f07c26dfa89995cbcf0c3925edb5b8b5bb3 debuginfo(build-id) = 20ab8d24e4135500ef88b69a02f31967d04855eb debuginfo(build-id) = 2170be5b5791d61f96182d0fe31fc32d3bc3e4c2 debuginfo(build-id) = 255fc9613151429ec6caef32f5115f22fff0aaba debuginfo(build-id) = 274c285360c888f9245e7180ad9ef56ab28a8484 debuginfo(build-id) = 2f8785d428ab012566662ec3a1c02b0f64c975ba debuginfo(build-id) = 2fd8906c167175e6e10640f211a88b8dc6dbdfe4 debuginfo(build-id) = 310f609115d9b01b52cb19a21c1ea2ba3510da31 debuginfo(build-id) = 3188395d3ad336c3c87fb076ca538c8c523b7ddc debuginfo(build-id) = 329c76ac6a8a1640493a3f53ce049fe146383ee7 debuginfo(build-id) = 34aed44e4ec079ea270d00206f748f3cf44f695b debuginfo(build-id) = 3a4ef4057fda46654774b141098a0a50b7243de5 debuginfo(build-id) = 3ab83e0f7a268cbf38792641c619c206c6ffd2a9 debuginfo(build-id) = 3c079cfd144180657f1b646d29e1d6eb48ae90df debuginfo(build-id) = 3fa4ef96e816e69af926958c0144042abe980eba debuginfo(build-id) = 4e2a60bf971df0c609638893fc29d26b319dfa7f debuginfo(build-id) = 4f2e38042b389fafc5ebbb7612f11fb690a56d19 debuginfo(build-id) = 51340b3573fad53ae3be36cce4c5793056648059 debuginfo(build-id) = 5335f53b099bafb130dc634ce611457af513b297 debuginfo(build-id) = 542040f62fa3cfdd9a3f6af6ca05c6318b9f5278 debuginfo(build-id) = 5a97a710c4ad5e1ad6f6e19e4ca85939eb5c404d debuginfo(build-id) = 740424ec78e341291e8790f83035ecf68e908ff0 debuginfo(build-id) = 7dce8647545d7351fd80148b4d3438864e71683e debuginfo(build-id) = 7e1b9c171beaee4229e7943c02807df26203a95c debuginfo(build-id) = 858aa408488d4fc4f696f85b34177f88f397db94 debuginfo(build-id) = 88ba0113aed450f79c009aebdae4d6881c27c944 debuginfo(build-id) = 88d342dfb4b5475474eb8f6be67f6577608249de debuginfo(build-id) = 8e0c70d486672751c5531d6ee5e89883621fe22c debuginfo(build-id) = 8ebf839ffddb5673734e649bbdc78546c15f2374 debuginfo(build-id) = 8f9d2d9ad1ee128bbc9a3353cab825483af42391 debuginfo(build-id) = 9a760972d2d41bc2207d494419bb50ec70c1ec9d debuginfo(build-id) = a142095f2f10a3ab1e487585c71f460c32333564 debuginfo(build-id) = a19d1d8e155248c923bca0d304a6c01be2638287 debuginfo(build-id) = a4ec79aec22d0ceec8312eaacd66268956b58821 debuginfo(build-id) = a5756eacc8b4fbc6a94e2a6cf852ea4d5785e78f debuginfo(build-id) = b1c9374c93613799251f097a8b51083b7125aa61 debuginfo(build-id) = b35de1c3f80252d9ad528d1d5fcffae3bbdf35ff debuginfo(build-id) = b70184400ec9f1ddafeedd9fca91938239a61a26 debuginfo(build-id) = b7c7c3f6a7950fa9eb7cb34d0d3ac317b59a546d debuginfo(build-id) = c54dbe9829fa613d9bac1dd34e14e0524de4df40 debuginfo(build-id) = d409b026d5d1930bdfa73789f85b355a43042326 debuginfo(build-id) = d45e8e899f77ff4ba612deee6cbf7c9a85637e9a debuginfo(build-id) = d4b47ef47960b2f3016f5382a848a2d3eb1b8ad5 debuginfo(build-id) = d5742ada9760702ba4fa8962047787216c7f724b debuginfo(build-id) = d84fd9a4a1441b272261b5b1431e6c50a4d09bef debuginfo(build-id) = dfbe75754fb3a2b7cc00c122bdb8de360bd0e041 debuginfo(build-id) = e187441503a6f10e0e76fe18bf91480e7be2b2ad debuginfo(build-id) = e473a28f0441190517d4df4056ca09fef2de4fec debuginfo(build-id) = e540d5b91336203323cd14d6a7c7f066d448a745 debuginfo(build-id) = e6e345fb04d703b2eff85c8fc167e32c541a4e33 debuginfo(build-id) = e756f40748c708a4f6fceb23913511d297409628 debuginfo(build-id) = e8aa42b46361629f1389235a9fd9a527bedee92f debuginfo(build-id) = f02b9744b7690345ca1e8987f66d6e985cf72b71 debuginfo(build-id) = f090a9411fe732679780a92ac437f7ae8a4ffdd7 debuginfo(build-id) = f342dd685dc6249fad54b7774150af1c8caeccad debuginfo(build-id) = f9527491dcdce8c637c1a20d9e1049a13d0494af debuginfo(build-id) = fc957b3d657aa8058dd58e2c1833cde42c0b91b6 freecad-debuginfo = 0.18.5-4.mga8 freecad-debuginfo(aarch-64) = 0.18.5-4.mga8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Recommends: freecad-debugsource(aarch-64) = 0.18.5-4.mga8 Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64 Wrote: /home/iurt/rpmbuild/RPMS/noarch/freecad-data-0.18.5-4.mga8.noarch.rpm Wrote: /home/iurt/rpmbuild/RPMS/aarch64/freecad-0.18.5-4.mga8.aarch64.rpm Wrote: /home/iurt/rpmbuild/RPMS/aarch64/freecad-debugsource-0.18.5-4.mga8.aarch64.rpm Wrote: /home/iurt/rpmbuild/RPMS/aarch64/freecad-debuginfo-0.18.5-4.mga8.aarch64.rpm Executing(%clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.6kX1LT + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd FreeCAD-0.18.5 + /usr/bin/rm -rf /home/iurt/rpmbuild/BUILDROOT/freecad-0.18.5-4.mga8.aarch64 + RPM_EC=0 ++ jobs -p + exit 0 Executing(--clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.NIaAjV + umask 022 + cd /home/iurt/rpmbuild/BUILD + rm -rf FreeCAD-0.18.5 + RPM_EC=0 ++ jobs -p + exit 0 D: [iurt_root_command] Success!