D: [iurt_root_command] chroot Installing /home/iurt/rpmbuild/SRPMS/flam3-3.1.1-5.mga8.src.rpm Building target platforms: aarch64 Building for target aarch64 Executing(%prep): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.9i9deb + umask 022 + cd /home/iurt/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + cd /home/iurt/rpmbuild/BUILD + rm -rf flam3-3.1.1 + /usr/bin/gzip -dc /home/iurt/rpmbuild/SOURCES/flam3-3.1.1.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd flam3-3.1.1 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch + /usr/bin/cat /home/iurt/rpmbuild/SOURCES/flam3-3.1.1-linking.patch + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.lf0BFa + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd flam3-3.1.1 + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + autoreconf -vfi autoreconf: export WARNINGS= autoreconf: Entering directory '.' autoreconf: configure.ac: not using Gettext autoreconf: running: aclocal --force -I m4 autoreconf: configure.ac: tracing autoreconf: running: libtoolize --copy --force libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' autoreconf: configure.ac: not using Intltool autoreconf: configure.ac: not using Gtkdoc autoreconf: running: aclocal --force -I m4 autoreconf: running: /usr/bin/autoconf --force configure.ac:5: warning: 'AM_CONFIG_HEADER': this macro is obsolete. configure.ac:5: You should use the 'AC_CONFIG_HEADERS' macro instead. ./lib/autoconf/general.m4:2433: AC_DIAGNOSE is expanded from... aclocal.m4:727: AM_CONFIG_HEADER is expanded from... configure.ac:5: the top level configure.ac:8: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. ./lib/autoconf/general.m4:2433: AC_DIAGNOSE is expanded from... aclocal.m4:429: AM_INIT_AUTOMAKE is expanded from... configure.ac:8: the top level configure.ac:21: warning: The macro `AM_DISABLE_SHARED' is obsolete. configure.ac:21: You should run autoupdate. m4/ltoptions.m4:206: AM_DISABLE_SHARED is expanded from... configure.ac:21: the top level configure.ac:22: warning: The macro `AC_PROG_LIBTOOL' is obsolete. configure.ac:22: You should run autoupdate. m4/libtool.m4:99: AC_PROG_LIBTOOL is expanded from... configure.ac:22: the top level configure.ac:23: warning: The macro `AC_HEADER_STDC' is obsolete. configure.ac:23: You should run autoupdate. ./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from... configure.ac:23: the top level configure.ac:26: warning: The macro `AC_HEADER_TIME' is obsolete. configure.ac:26: You should run autoupdate. ./lib/autoconf/headers.m4:743: AC_HEADER_TIME is expanded from... configure.ac:26: the top level configure.ac:39: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ./lib/autoconf/lang.m4:199: AC_LANG_CONFTEST is expanded from... configure.ac:39: the top level configure.ac:53: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ./lib/autoconf/lang.m4:199: AC_LANG_CONFTEST is expanded from... configure.ac:53: the top level configure.ac:81: warning: AC_OUTPUT should be used without arguments. configure.ac:81: You should run autoupdate. autoreconf: running: /usr/bin/autoheader --force autoreconf: running: automake --add-missing --copy --force-missing configure.ac:8: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:8: https://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation configure.ac:15: installing './compile' configure.ac:8: installing './missing' autoreconf: Leaving directory '.' + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables ' + export FCFLAGS + LDFLAGS=' -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags' + export LDFLAGS + CONFIGURE_TOP=. + '[' 1 = 1 ']' ++ find . -name config.guess -o -name config.sub + for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub) ++ basename ./config.sub + '[' -f /usr/lib/rpm/mageia/config.sub ']' ++ basename ./config.sub + cp -af /usr/lib/rpm/mageia/config.sub ./config.sub + for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub) ++ basename ./config.guess + '[' -f /usr/lib/rpm/mageia/config.guess ']' ++ basename ./config.guess + cp -af /usr/lib/rpm/mageia/config.guess ./config.guess + /usr/lib/rpm/mageia/force-as-needed-for-shared-lib-in-libtool Forcing -Wl,--as-needed in configure/libtool to workaround libtool bug (cf http://lists.gnu.org/archive/html/libtool-patches/2004-06/msg00002.html) + /usr/lib/rpm/mageia/drop-ld-no-undefined-for-shared-lib-modules-in-libtool Modifying ltmain.sh underlinking for plugins (cf http://wiki.mandriva.com/en/Underlinking) + /usr/lib/rpm/mageia/fix-libtool-ltmain-from-overlinking Fixing libtool's ltmain.sh to prevent overlinking (cf http://wiki.mandriva.com/en/Overlinking) + /usr/lib/rpm/mageia/fix-libtool-from-moving-options-after-libs . + /usr/lib/rpm/mageia/fix-dlsearch-path-in-libtool-for-multilib . lib64 + ./configure --host=aarch64-mageia-linux-gnu --build=aarch64-mageia-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --includedir=/usr/include/flam3 --enable-shared --disable-static checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for aarch64-mageia-linux-gnu-gcc... aarch64-mageia-linux-gnu-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether aarch64-mageia-linux-gnu-gcc accepts -g... yes checking for aarch64-mageia-linux-gnu-gcc option to enable C11 features... none needed checking whether aarch64-mageia-linux-gnu-gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of aarch64-mageia-linux-gnu-gcc... none checking whether make sets $(MAKE)... (cached) yes checking build system type... aarch64-mageia-linux-gnu checking host system type... aarch64-mageia-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by aarch64-mageia-linux-gnu-gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/aarch64-mageia-linux-gnu-nm -p checking the name lister (/usr/bin/aarch64-mageia-linux-gnu-nm -p) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert aarch64-mageia-linux-gnu file names to aarch64-mageia-linux-gnu format... func_convert_file_noop checking how to convert aarch64-mageia-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for aarch64-mageia-linux-gnu-objdump... no checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for aarch64-mageia-linux-gnu-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for aarch64-mageia-linux-gnu-ar... aarch64-mageia-linux-gnu-ar checking for archiver @FILE support... @ checking for aarch64-mageia-linux-gnu-strip... no checking for strip... strip checking for aarch64-mageia-linux-gnu-ranlib... aarch64-mageia-linux-gnu-ranlib checking command to parse /usr/bin/aarch64-mageia-linux-gnu-nm -p output from aarch64-mageia-linux-gnu-gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for aarch64-mageia-linux-gnu-mt... no checking for mt... no checking if : is a manifest tool... no checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for sys/time.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if aarch64-mageia-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no checking for aarch64-mageia-linux-gnu-gcc option to produce PIC... -fPIC -DPIC checking if aarch64-mageia-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes checking if aarch64-mageia-linux-gnu-gcc static flag -static works... no checking if aarch64-mageia-linux-gnu-gcc supports -c -o file.o... yes checking if aarch64-mageia-linux-gnu-gcc supports -c -o file.o... (cached) yes checking whether the aarch64-mageia-linux-gnu-gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for egrep... (cached) /usr/bin/grep -E checking for an ANSI C-conforming const... yes checking for size_t... yes checking for deflateInit_ in -lz... yes checking for png_write_image in -lpng... yes checking for xmlParseFile in -lxml2... yes checking whether aarch64-mageia-linux-gnu-gcc knows 32-bit __sync_bool_compare_and_swap()... yes checking whether aarch64-mageia-linux-gnu-gcc knows 64-bit __sync_bool_compare_and_swap()... yes checking for pthread_create in -lpthread... yes checking for jpeg_start_compress in -ljpeg... yes checking for xml2-config... /usr/bin/xml2-config checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating flam3.pc config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands + /usr/bin/make -O -j8 V=1 VERBOSE=1 /usr/bin/make all-am make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: git: No such file or directory aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c -o docstring.o docstring.c make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: git: No such file or directory aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c -o flam3-animate.o flam3-animate.c make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=compile aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c -o palettes.lo palettes.c libtool: compile: aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c palettes.c -fPIC -DPIC -o .libs/palettes.o make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=compile aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c -o filters.lo filters.c libtool: compile: aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c filters.c -fPIC -DPIC -o .libs/filters.o make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=compile aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c -o jpeg.lo jpeg.c libtool: compile: aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c jpeg.c -fPIC -DPIC -o .libs/jpeg.o make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=compile aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c -o png.lo png.c libtool: compile: aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c png.c -fPIC -DPIC -o .libs/png.o make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: git: No such file or directory aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c -o flam3-render.o flam3-render.c make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: git: No such file or directory aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c -o flam3-convert.o flam3-convert.c make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=compile aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c -o isaac.lo isaac.c libtool: compile: aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c isaac.c -fPIC -DPIC -o .libs/isaac.o make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=compile aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c -o variations.lo variations.c libtool: compile: aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c variations.c -fPIC -DPIC -o .libs/variations.o make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=compile aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c -o parser.lo parser.c libtool: compile: aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c parser.c -fPIC -DPIC -o .libs/parser.o make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: git: No such file or directory aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c -o flam3-genome.o flam3-genome.c flam3-genome.c: In function 'main': flam3-genome.c:1016:71: warning: '%s' directive output may be truncated writing up to 64 bytes into a region of size between 50 and 59 [-Wformat-truncation=] 1016 | snprintf(cp_orig.flame_name, flam3_name_len, "%d of %s x %s", | ^~ In file included from /usr/include/stdio.h:866, from flam3.h:23, from private.h:22, from flam3-genome.c:19: /usr/include/bits/stdio2.h:70:10: note: '__builtin___snprintf_chk' output between 9 and 146 bytes into a destination of size 64 70 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 71 | __bos (__s), __fmt, __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ flam3-genome.c:981:80: warning: '%s' directive output may be truncated writing up to 64 bytes into a region of size between 41 and 50 [-Wformat-truncation=] 981 | snprintf(cp_orig.flame_name, flam3_name_len, "mutation %d of %s", rep, tm); | ^~ ~~ In file included from /usr/include/stdio.h:866, from flam3.h:23, from private.h:22, from flam3-genome.c:19: /usr/include/bits/stdio2.h:70:10: note: '__builtin___snprintf_chk' output between 15 and 88 bytes into a destination of size 64 70 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 71 | __bos (__s), __fmt, __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=compile aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c -o interpolation.lo interpolation.c libtool: compile: aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c interpolation.c -fPIC -DPIC -o .libs/interpolation.o make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=compile aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c -o flam3.lo flam3.c libtool: compile: aarch64-mageia-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c flam3.c -fPIC -DPIC -o .libs/flam3.o flam3.c: In function 'flam3_cross': flam3.c:2730:24: warning: '%7.5g' directive writing between 7 and 12 bytes into a region of size 10 [-Wformat-overflow=] 2730 | sprintf(ministr,"%7.5g",t); | ^~~~~ flam3.c:2730:23: note: assuming directive output of 11 bytes 2730 | sprintf(ministr,"%7.5g",t); | ^~~~~~~ In file included from /usr/include/stdio.h:866, from flam3.h:23, from private.h:22, from flam3.c:23: /usr/include/bits/stdio2.h:38:10: note: '__builtin___sprintf_chk' output between 8 and 13 bytes into a destination of size 10 38 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 39 | __bos (__s), __fmt, __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=link aarch64-mageia-linux-gnu-gcc -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -o libflam3.la -rpath /usr/lib64 flam3.lo filters.lo parser.lo variations.lo interpolation.lo palettes.lo jpeg.lo png.lo isaac.lo -lm -ljpeg -lpng -lz -lpthread -ljpeg -lpthread -lxml2 -lpng -lz libtool: link: aarch64-mageia-linux-gnu-gcc -shared -Wl,--as-needed -fPIC -DPIC .libs/flam3.o .libs/filters.o .libs/parser.o .libs/variations.o .libs/interpolation.o .libs/palettes.o .libs/jpeg.o .libs/png.o .libs/isaac.o -g -O3 -O2 -g -fstack-protector -Wl,--as-needed -Wl,--no-undefined -Wl,-z -Wl,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -lm -ljpeg -lpthread -lxml2 -lpng -lz -Wl,-soname -Wl,libflam3.so.0 -o .libs/libflam3.so.0.0.0 libtool: link: (cd ".libs" && rm -f "libflam3.so.0" && ln -s "libflam3.so.0.0.0" "libflam3.so.0") libtool: link: (cd ".libs" && rm -f "libflam3.so" && ln -s "libflam3.so.0.0.0" "libflam3.so") libtool: link: ( cd ".libs" && rm -f "libflam3.la" && ln -s "../libflam3.la" "libflam3.la" ) make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=link aarch64-mageia-linux-gnu-gcc -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -o flam3-animate flam3-animate.o docstring.o libflam3.la -lm -ljpeg -lpthread -lxml2 -lpng -lz libtool: link: aarch64-mageia-linux-gnu-gcc -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -Wl,--as-needed -Wl,--no-undefined -Wl,-z -Wl,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -o .libs/flam3-animate flam3-animate.o docstring.o ./.libs/libflam3.so -lm -ljpeg -lpthread -lxml2 -lpng -lz make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=link aarch64-mageia-linux-gnu-gcc -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -o flam3-convert flam3-convert.o docstring.o libflam3.la -lm -ljpeg -lpthread -lxml2 -lpng -lz libtool: link: aarch64-mageia-linux-gnu-gcc -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -Wl,--as-needed -Wl,--no-undefined -Wl,-z -Wl,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -o .libs/flam3-convert flam3-convert.o docstring.o ./.libs/libflam3.so -lm -ljpeg -lpthread -lxml2 -lpng -lz make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=link aarch64-mageia-linux-gnu-gcc -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -o flam3-render flam3-render.o docstring.o libflam3.la -lm -ljpeg -lpthread -lxml2 -lpng -lz libtool: link: aarch64-mageia-linux-gnu-gcc -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -Wl,--as-needed -Wl,--no-undefined -Wl,-z -Wl,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -o .libs/flam3-render flam3-render.o docstring.o ./.libs/libflam3.so -lm -ljpeg -lpthread -lxml2 -lpng -lz make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=link aarch64-mageia-linux-gnu-gcc -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -o flam3-genome flam3-genome.o docstring.o libflam3.la -lm -ljpeg -lpthread -lxml2 -lpng -lz libtool: link: aarch64-mageia-linux-gnu-gcc -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -Wl,--as-needed -Wl,--no-undefined -Wl,-z -Wl,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -o .libs/flam3-genome flam3-genome.o docstring.o ./.libs/libflam3.so -lm -ljpeg -lpthread -lxml2 -lpng -lz make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.gmLZ9c + umask 022 + cd /home/iurt/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64 '!=' / ']' + rm -rf /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64 ++ dirname /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64 + mkdir -p /home/iurt/rpmbuild/BUILDROOT + mkdir /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64 + cd flam3-3.1.1 + '[' 1 -eq 1 ']' + /usr/bin/make install DESTDIR=/home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64 'INSTALL=/usr/bin/install -p' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' /usr/bin/mkdir -p '/home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/lib64' /bin/sh ./libtool --mode=install /usr/bin/install -p libflam3.la '/home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/lib64' libtool: install: /usr/bin/install -p .libs/libflam3.so.0.0.0 /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/lib64/libflam3.so.0.0.0 libtool: install: (cd /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/lib64 && { ln -s -f libflam3.so.0.0.0 libflam3.so.0 || { rm -f libflam3.so.0 && ln -s libflam3.so.0.0.0 libflam3.so.0; }; }) libtool: install: (cd /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/lib64 && { ln -s -f libflam3.so.0.0.0 libflam3.so || { rm -f libflam3.so && ln -s libflam3.so.0.0.0 libflam3.so; }; }) libtool: install: /usr/bin/install -p .libs/libflam3.lai /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/lib64/libflam3.la libtool: warning: remember to run 'libtool --finish /usr/lib64' /usr/bin/mkdir -p '/home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/bin' /bin/sh ./libtool --mode=install /usr/bin/install -p flam3-animate flam3-genome flam3-render flam3-convert '/home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/bin' libtool: warning: 'libflam3.la' has not been installed in '/usr/lib64' libtool: install: /usr/bin/install -p .libs/flam3-animate /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/bin/flam3-animate libtool: warning: 'libflam3.la' has not been installed in '/usr/lib64' libtool: install: /usr/bin/install -p .libs/flam3-genome /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/bin/flam3-genome libtool: warning: 'libflam3.la' has not been installed in '/usr/lib64' libtool: install: /usr/bin/install -p .libs/flam3-render /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/bin/flam3-render libtool: warning: 'libflam3.la' has not been installed in '/usr/lib64' libtool: install: /usr/bin/install -p .libs/flam3-convert /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/bin/flam3-convert /usr/bin/mkdir -p '/home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/include/flam3' /usr/bin/install -p -m 644 flam3.h isaac.h isaacs.h rect.c '/home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/include/flam3' /usr/bin/mkdir -p '/home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/share/man/man1' /usr/bin/install -p -m 644 'flam3-animate.man' '/home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/share/man/man1/flam3-animate.1' /usr/bin/install -p -m 644 'flam3-genome.man' '/home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/share/man/man1/flam3-genome.1' /usr/bin/install -p -m 644 'flam3-render.man' '/home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/share/man/man1/flam3-render.1' /usr/bin/install -p -m 644 'flam3-convert.man' '/home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/share/man/man1/flam3-convert.1' /usr/bin/mkdir -p '/home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/lib64/pkgconfig' /usr/bin/install -p -m 644 flam3.pc '/home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/lib64/pkgconfig' /usr/bin/mkdir -p '/home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/share/flam3' /usr/bin/install -p -m 644 flam3-palettes.xml '/home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/share/flam3' make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/flam3-3.1.1' + find /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64 -name '*.la' -delete + chrpath --delete /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/bin/flam3-animate /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/bin/flam3-convert /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/bin/flam3-genome /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/bin/flam3-render + /usr/lib/rpm/find-debuginfo.sh -j8 --strict-build-id -m -i --build-id-seed 3.1.1-5.mga8 --unique-debug-suffix -3.1.1-5.mga8.aarch64 --unique-debug-src-base flam3-3.1.1-5.mga8.aarch64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /home/iurt/rpmbuild/BUILD/flam3-3.1.1 explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/bin/flam3-animate explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/bin/flam3-convert explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/bin/flam3-genome explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/lib64/libflam3.so.0.0.0 explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/bin/flam3-render extracting debug info from /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/bin/flam3-convert extracting debug info from /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/bin/flam3-genome extracting debug info from /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/bin/flam3-animate extracting debug info from /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/lib64/libflam3.so.0.0.0 extracting debug info from /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/bin/flam3-render original debug info size: 1116kB, size after compression: 1024kB /usr/lib/rpm/sepdebugcrcfix: Updated 5 CRC32s, 0 CRC32s did match. 960 blocks + /usr/lib/rpm/check-buildroot + '[' -n '' ']' + /usr/share/spec-helper/clean_files + '[' -n '' ']' + /usr/share/spec-helper/compress_files .xz + '[' -n '' ']' + /usr/share/spec-helper/relink_symlinks + '[' -n '' ']' + /usr/share/spec-helper/clean_perl + '[' -n '' ']' + /usr/share/spec-helper/lib_symlinks + '[' -n '' ']' + /usr/share/spec-helper/gprintify + '[' -n '' ']' + /usr/share/spec-helper/fix_mo + '[' -n '' ']' + /usr/share/spec-helper/fix_pamd + '[' -n '' ']' + /usr/share/spec-helper/remove_info_dir + '[' -n '' ']' + /usr/share/spec-helper/fix_eol + '[' -n '' ']' + /usr/share/spec-helper/check_desktop_files + '[' -n '' ']' + /usr/share/spec-helper/check_elf_files + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python3 1 1 + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/redhat/brp-mangle-shebangs *** WARNING: ./usr/src/debug/flam3-3.1.1-5.mga8.aarch64/png.c is executable but has no shebang, removing executable bit Processing files: flam3-3.1.1-5.mga8.aarch64 Executing(%doc): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.0Hf8yd + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd flam3-3.1.1 + DOCDIR=/home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/share/doc/flam3 + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/share/doc/flam3 + cp -pr README.txt /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/share/doc/flam3 + RPM_EC=0 ++ jobs -p + exit 0 Provides: flam3 = 3.1.1-5.mga8 flam3(aarch-64) = 3.1.1-5.mga8 libflam3.so.0()(64bit) Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libflam3.so.0()(64bit) libjpeg.so.8()(64bit) libjpeg.so.8(LIBJPEG_8.0)(64bit) libm.so.6()(64bit) libm.so.6(GLIBC_2.17)(64bit) libm.so.6(GLIBC_2.29)(64bit) libpng16.so.16()(64bit) libpng16.so.16(PNG16_0)(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.17)(64bit) libxml2.so.2()(64bit) libxml2.so.2(LIBXML2_2.4.30)(64bit) libxml2.so.2(LIBXML2_2.6.0)(64bit) Processing files: flam3-devel-3.1.1-5.mga8.aarch64 Executing(%doc): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.4BIabc + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd flam3-3.1.1 + DOCDIR=/home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/share/doc/flam3-devel + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/share/doc/flam3-devel + cp -pr README.txt /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64/usr/share/doc/flam3-devel + RPM_EC=0 ++ jobs -p + exit 0 Provides: devel(libflam3(64bit)) flam3-devel = 3.1.1-5.mga8 flam3-devel(aarch-64) = 3.1.1-5.mga8 pkgconfig(flam3) = 3.1.1 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: devel(libjpeg(64bit)) devel(libm(64bit)) devel(libpng16(64bit)) devel(libxml2(64bit)) pkgconfig pkgconfig(libpng) >= 1.0 pkgconfig(libxml-2.0) Processing files: flam3-debugsource-3.1.1-5.mga8.aarch64 Provides: flam3-debugsource = 3.1.1-5.mga8 flam3-debugsource(aarch-64) = 3.1.1-5.mga8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: flam3-debuginfo-3.1.1-5.mga8.aarch64 Provides: debuginfo(build-id) = 0e8d8e373367887954800210dece279e5624dbc1 debuginfo(build-id) = 1ab4468055a00485f039b5e8a804e9373d558663 debuginfo(build-id) = 56c4a77efa76012c2b302ab4584fa1c160ee2413 debuginfo(build-id) = 894d76aedfdf7acc5cabd6189b830d89ae0cfab5 debuginfo(build-id) = d5e8ba582bc6f91b2065873c28b1d600463bcfe6 flam3-debuginfo = 3.1.1-5.mga8 flam3-debuginfo(aarch-64) = 3.1.1-5.mga8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Recommends: flam3-debugsource(aarch-64) = 3.1.1-5.mga8 Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64 Wrote: /home/iurt/rpmbuild/RPMS/aarch64/flam3-devel-3.1.1-5.mga8.aarch64.rpm Wrote: /home/iurt/rpmbuild/RPMS/aarch64/flam3-debugsource-3.1.1-5.mga8.aarch64.rpm Wrote: /home/iurt/rpmbuild/RPMS/aarch64/flam3-debuginfo-3.1.1-5.mga8.aarch64.rpm Wrote: /home/iurt/rpmbuild/RPMS/aarch64/flam3-3.1.1-5.mga8.aarch64.rpm Executing(%clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.cIcvVd + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd flam3-3.1.1 + /usr/bin/rm -rf /home/iurt/rpmbuild/BUILDROOT/flam3-3.1.1-5.mga8.aarch64 + RPM_EC=0 ++ jobs -p + exit 0 Executing(--clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.zAL1zd + umask 022 + cd /home/iurt/rpmbuild/BUILD + rm -rf flam3-3.1.1 + RPM_EC=0 ++ jobs -p + exit 0 D: [iurt_root_command] Success!