D: [iurt_root_command] chroot
warning: %make is deprecated, use %make_build instead
warning: %make is deprecated, use %make_build instead
Installing /home/iurt/rpmbuild/SRPMS/perl-Tapper-Config-5.0.4-2.mga8.src.rpm
Building target platforms: aarch64
Building for target aarch64
Executing(%prep): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.rd9PUz
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/iurt/rpmbuild/BUILD
+ rm -rf Tapper-Config-5.0.4
+ /usr/bin/gzip -dc /home/iurt/rpmbuild/SOURCES/Tapper-Config-5.0.4.tar.gz
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd Tapper-Config-5.0.4
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.kn58zv
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Tapper-Config-5.0.4
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Tapper::Config
Writing MYMETA.yml and MYMETA.json
+ /usr/bin/make -O -j8
cp lib/auto/Tapper/Config/log4perl_test.cfg blib/lib/auto/Tapper/Config/log4perl_test.cfg
cp lib/Tapper/Config.pm blib/lib/Tapper/Config.pm
cp lib/auto/Tapper/Config/tapper.yml blib/lib/auto/Tapper/Config/tapper.yml
cp lib/auto/Tapper/Config/log4perl.cfg blib/lib/auto/Tapper/Config/log4perl.cfg
cp lib/auto/Tapper/Config/log4perl_webgui.cfg blib/lib/auto/Tapper/Config/log4perl_webgui.cfg
Manifying 1 pod document
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.HX7QRy
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' /home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64 '!=' / ']'
+ rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64
++ dirname /home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64
+ mkdir -p /home/iurt/rpmbuild/BUILDROOT
+ mkdir /home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64
+ cd Tapper-Config-5.0.4
+ '[' 1 -eq 1 ']'
+ /usr/bin/make install DESTDIR=/home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64 'INSTALL=/usr/bin/install -p'
Manifying 1 pod document
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64/usr/share/perl5/vendor_perl/auto/Tapper/Config/log4perl_test.cfg
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64/usr/share/perl5/vendor_perl/auto/Tapper/Config/tapper.yml
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64/usr/share/perl5/vendor_perl/auto/Tapper/Config/log4perl_webgui.cfg
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64/usr/share/perl5/vendor_perl/auto/Tapper/Config/log4perl.cfg
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64/usr/share/perl5/vendor_perl/Tapper/Config.pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64/usr/share/man/man3/Tapper::Config.3pm
Appending installation info to /home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64/usr/lib64/perl5/perllocal.pod
+ /usr/lib/rpm/find-debuginfo.sh -j8 --strict-build-id -m -i --build-id-seed 5.0.4-2.mga8 --unique-debug-suffix -5.0.4-2.mga8.aarch64 --unique-debug-src-base perl-Tapper-Config-5.0.4-2.mga8.aarch64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /home/iurt/rpmbuild/BUILD/Tapper-Config-5.0.4

+ /usr/lib/rpm/check-buildroot
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_desktop_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python3 1 1
+ /usr/lib/rpm/brp-python-hardlink
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
*** WARNING: ./usr/share/perl5/vendor_perl/auto/Tapper/Config/tapper.yml is executable but has no shebang, removing executable bit
Executing(%check): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.hOClPw
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Tapper-Config-5.0.4
+ '[' 1 -eq 1 ']'
+ /usr/bin/make -O -j8 test
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.32.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load.t ..................... ok
t/author-eol.t .................. skipped: these tests are for testing by the author
t/author-no-tabs.t .............. skipped: these tests are for testing by the author
t/author-pod-syntax.t ........... skipped: these tests are for testing by the author
t/release-pod-coverage.t ........ skipped: these tests are for release candidate testing
t/tapper_config.t ............... ok
t/tapper_config_defaultmerge.t .. ok
All tests successful.
Files=7, Tests=22,  2 wallclock secs ( 0.08 usr  0.01 sys +  1.48 cusr  0.12 csys =  1.69 CPU)
Result: PASS
+ RPM_EC=0
++ jobs -p
+ exit 0
Processing files: perl-Tapper-Config-5.0.4-2.mga8.noarch
Executing(%doc): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.JB59ey
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Tapper-Config-5.0.4
+ DOCDIR=/home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64/usr/share/doc/perl-Tapper-Config
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64/usr/share/doc/perl-Tapper-Config
+ cp -pr Changes /home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64/usr/share/doc/perl-Tapper-Config
+ cp -pr LICENSE /home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64/usr/share/doc/perl-Tapper-Config
+ cp -pr META.json /home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64/usr/share/doc/perl-Tapper-Config
+ cp -pr META.yml /home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64/usr/share/doc/perl-Tapper-Config
+ cp -pr MYMETA.yml /home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64/usr/share/doc/perl-Tapper-Config
+ cp -pr README /home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64/usr/share/doc/perl-Tapper-Config
+ RPM_EC=0
++ jobs -p
+ exit 0
Provides: perl(Tapper::Config) = 5.0.4 perl-Tapper-Config = 5.0.4-2.mga8
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: perl >= 1:5.010 perl(File::ShareDir) perl(File::Slurp) perl(Hash::Merge) perl(YAML::Syck) perl(strict) perl(warnings) perl-base >= 2:5.32.0
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64
Wrote: /home/iurt/rpmbuild/RPMS/noarch/perl-Tapper-Config-5.0.4-2.mga8.noarch.rpm
Executing(%clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.WwgNPz
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Tapper-Config-5.0.4
+ /usr/bin/rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-Tapper-Config-5.0.4-2.mga8.aarch64
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(--clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.boAqWv
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ rm -rf Tapper-Config-5.0.4
+ RPM_EC=0
++ jobs -p
+ exit 0
D: [iurt_root_command] Success!