D: [iurt_root_command] chroot
warning: %make is deprecated, use %make_build instead
Installing /home/iurt/rpmbuild/SRPMS/perl-Convert-PEM-0.80.0-12.mga8.src.rpm
Building target platforms: aarch64
Building for target aarch64
Executing(%prep): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.wcKU3T
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/iurt/rpmbuild/BUILD
+ rm -rf Convert-PEM-0.08
+ /usr/bin/bzip2 -dc /home/iurt/rpmbuild/SOURCES/Convert-PEM-0.08.tar.bz2
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd Convert-PEM-0.08
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ echo 'Patch #0 (Convert-PEM-0.08-Do-not-test-the-reason-for-decryption-failure-on-bad.patch):'
Patch #0 (Convert-PEM-0.08-Do-not-test-the-reason-for-decryption-failure-on-bad.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 --fuzz=0
patching file t/01-readwrite.t
patching file t/02-encode.t
+ echo 'Patch #1 (Convert-PEM-0.08-Fix-building-on-Perl-without-dot-in-INC.patch):'
Patch #1 (Convert-PEM-0.08-Fix-building-on-Perl-without-dot-in-INC.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 --fuzz=0
patching file Makefile.PL
+ rm -rf inc/Spiffy.pm inc/Sub/ inc/Test/
+ sed -e '/^inc\/\(Spiffy\|Sub\|Test\)/d' -i MANIFEST
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.FDwzzV
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Convert-PEM-0.08
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Convert::PEM
Writing MYMETA.yml and MYMETA.json
+ /usr/bin/make -O -j8
cp lib/Convert/PEM/CBC.pm blib/lib/Convert/PEM/CBC.pm
cp lib/Convert/PEM.pm blib/lib/Convert/PEM.pm
Manifying 2 pod documents
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.I5g6vT
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' /home/iurt/rpmbuild/BUILDROOT/perl-Convert-PEM-0.80.0-12.mga8.aarch64 '!=' / ']'
+ rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-Convert-PEM-0.80.0-12.mga8.aarch64
++ dirname /home/iurt/rpmbuild/BUILDROOT/perl-Convert-PEM-0.80.0-12.mga8.aarch64
+ mkdir -p /home/iurt/rpmbuild/BUILDROOT
+ mkdir /home/iurt/rpmbuild/BUILDROOT/perl-Convert-PEM-0.80.0-12.mga8.aarch64
+ cd Convert-PEM-0.08
+ '[' 1 -eq 1 ']'
+ /usr/bin/make install DESTDIR=/home/iurt/rpmbuild/BUILDROOT/perl-Convert-PEM-0.80.0-12.mga8.aarch64 'INSTALL=/usr/bin/install -p'
Manifying 2 pod documents
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Convert-PEM-0.80.0-12.mga8.aarch64/usr/share/perl5/vendor_perl/Convert/PEM.pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Convert-PEM-0.80.0-12.mga8.aarch64/usr/share/perl5/vendor_perl/Convert/PEM/CBC.pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Convert-PEM-0.80.0-12.mga8.aarch64/usr/share/man/man3/Convert::PEM.3pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Convert-PEM-0.80.0-12.mga8.aarch64/usr/share/man/man3/Convert::PEM::CBC.3pm
Appending installation info to /home/iurt/rpmbuild/BUILDROOT/perl-Convert-PEM-0.80.0-12.mga8.aarch64/usr/lib64/perl5/perllocal.pod
+ /usr/lib/rpm/find-debuginfo.sh -j8 --strict-build-id -m -i --build-id-seed 0.80.0-12.mga8 --unique-debug-suffix -0.80.0-12.mga8.aarch64 --unique-debug-src-base perl-Convert-PEM-0.80.0-12.mga8.aarch64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /home/iurt/rpmbuild/BUILD/Convert-PEM-0.08

+ /usr/lib/rpm/check-buildroot
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_desktop_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python3 1 1
+ /usr/lib/rpm/brp-python-hardlink
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
Executing(%check): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.qXx50T
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Convert-PEM-0.08
+ '[' 1 -eq 1 ']'
+ make test
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.32.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t .... ok
t/01-readwrite.t .. ok
t/02-encode.t ..... ok
t/03-ede3.t ....... ok
t/04-explode.t .... ok
All tests successful.
Files=5, Tests=34,  1 wallclock secs ( 0.05 usr  0.02 sys +  1.21 cusr  0.08 csys =  1.36 CPU)
Result: PASS
+ RPM_EC=0
++ jobs -p
+ exit 0
Processing files: perl-Convert-PEM-0.80.0-12.mga8.noarch
Executing(%doc): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.DB7ceU
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Convert-PEM-0.08
+ DOCDIR=/home/iurt/rpmbuild/BUILDROOT/perl-Convert-PEM-0.80.0-12.mga8.aarch64/usr/share/doc/perl-Convert-PEM
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/iurt/rpmbuild/BUILDROOT/perl-Convert-PEM-0.80.0-12.mga8.aarch64/usr/share/doc/perl-Convert-PEM
+ cp -pr README /home/iurt/rpmbuild/BUILDROOT/perl-Convert-PEM-0.80.0-12.mga8.aarch64/usr/share/doc/perl-Convert-PEM
+ cp -pr Changes /home/iurt/rpmbuild/BUILDROOT/perl-Convert-PEM-0.80.0-12.mga8.aarch64/usr/share/doc/perl-Convert-PEM
+ RPM_EC=0
++ jobs -p
+ exit 0
Provides: perl(Convert::PEM) = 0.80.0 perl(Convert::PEM::CBC) perl-Convert-PEM = 0.80.0-12.mga8
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: perl >= 0:5.008_001 perl(Carp) perl(Class::ErrorHandler) perl(Convert::ASN1) perl(Convert::PEM::CBC) perl(Digest::MD5) perl(MIME::Base64) perl(base) perl(strict) perl(vars) perl-base >= 2:5.32.0
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/iurt/rpmbuild/BUILDROOT/perl-Convert-PEM-0.80.0-12.mga8.aarch64
Wrote: /home/iurt/rpmbuild/RPMS/noarch/perl-Convert-PEM-0.80.0-12.mga8.noarch.rpm
Executing(%clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.bg8YoV
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Convert-PEM-0.08
+ /usr/bin/rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-Convert-PEM-0.80.0-12.mga8.aarch64
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(--clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.2OXcRV
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ rm -rf Convert-PEM-0.08
+ RPM_EC=0
++ jobs -p
+ exit 0
D: [iurt_root_command] Success!